korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 16:54:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
e0557c0d1a
linux/arch/arm/mach-ixp4xx/Kconfig

246 lines
6.9 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ARCH_IXP4XX
config ARCH_SUPPORTS_BIG_ENDIAN
bool
default y
menu "Intel IXP4xx Implementation Options"
comment "IXP4xx Platforms"
[ARM] 3140/1: NSLU2 machine support Patch from Alessandro Zummo This patch adds support for the LinkSys NSLU2 running with both big and little-endian kernels. The LinkSys NSLU2 is a cost engineered ARM, XScale 420 based system similar to the the Intel IXDP425 evaluation board. It uses the IXP4XX ARCH. While this patch applies independently of other patches the resultant kernel requires further patches to successfully use onboard devices, including the onboard flash. Since these patches are independent of this one they will be submitted separately. A defconfig is not included here because not all of the required drivers are actually in the kernel. We intend to provide one as soon as the patches will be incorporated in mainstream. This patch is the combined work of nslu2-linux.org Signed-off-by: John Bowler <jbowler@acm.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 22:05:04 +08:00
config MACH_NSLU2
bool
[ARM] 3355/1: NSLU2: remove propmt depends Patch from Alessandro Zummo The patch that would have made the NSLU2 kernel non compatible with other ixp4xx machs never entered the kernel. So it is actually safe to remove the prompt dependencies. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-09 07:45:12 +08:00
prompt "Linksys NSLU2"
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 22:34:29 +08:00
select PCI
[ARM] 3140/1: NSLU2 machine support Patch from Alessandro Zummo This patch adds support for the LinkSys NSLU2 running with both big and little-endian kernels. The LinkSys NSLU2 is a cost engineered ARM, XScale 420 based system similar to the the Intel IXDP425 evaluation board. It uses the IXP4XX ARCH. While this patch applies independently of other patches the resultant kernel requires further patches to successfully use onboard devices, including the onboard flash. Since these patches are independent of this one they will be submitted separately. A defconfig is not included here because not all of the required drivers are actually in the kernel. We intend to provide one as soon as the patches will be incorporated in mainstream. This patch is the combined work of nslu2-linux.org Signed-off-by: John Bowler <jbowler@acm.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 22:05:04 +08:00
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
see http://www.nslu2-linux.org
[ARM] 4033/1: Add separate Avila board setup code This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 06:04:05 +08:00
config MACH_AVILA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bool "Avila"
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 22:34:29 +08:00
select PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
see <file:Documentation/arm/IXP4xx>.
[ARM] 4033/1: Add separate Avila board setup code This patch adds support for the Gateworks Avila Network Platform in a separate set of setup files to the IXDP425. This is necessary now that a driver for the Avila CF card slot is available. It also adds support for a minor variant on the Avila board known as the Loft, which has a different number of maximum PCI devices. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 06:04:05 +08:00
config MACH_LOFT
bool "Loft"
depends on MACH_AVILA
help
Say 'Y' here if you want your kernel to support the Giant
Shoulder Inc Loft board (a minor variation on the standard
Gateworks Avila Network Platform).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config ARCH_ADI_COYOTE
bool "Coyote"
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 22:34:29 +08:00
select PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
[ARM] 4425/2: Gateway 7001 series support This patch provides support for the Gateway 7001 AccessPoint series. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 22:44:08 +08:00
config MACH_GATEWAY7001
bool "Gateway 7001"
select PCI
help
Say 'Y' here if you want your kernel to support Gateway's
7001 Access Point. For more information on this platform,
see http://openwrt.org
[ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series. This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 22:47:51 +08:00
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
select PCI
help
Say 'Y' here if you want your kernel to support Netgear's
WG302 v2 or WAG302 v2 Access Points. For more information
on this platform, see http://openwrt.org
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config ARCH_IXDP425
bool "IXDP425"
help
Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
config MACH_IXDPG425
bool "IXDPG425"
help
Say 'Y' here if you want your kernel to support Intel's
IXDPG425 Development Platform (Also known as Montajade).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
config MACH_IXDP465
bool "IXDP465"
help
Say 'Y' here if you want your kernel to support Intel's
IXDP465 Development Platform (Also known as BMP).
[PATCH] arm: fix help text for ixdp465 ) From: Russell King <rmk+lkml@arm.linux.org.uk> For some reason, this help text was missed when the file was last audited by the documentation referencing folk. Fix this incorrect documentation reference. Signed-off-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17 06:23:56 +08:00
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IXP4xx: support for Goramo MultiLink router platform. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-24 05:58:30 +08:00
config MACH_GORAMO_MLR
bool "GORAMO Multi Link Router"
help
Say 'Y' here if you want your kernel to support GORAMO
MultiLink router.
[ARM] 4311/1: ixp4xx: add KIXRP435 platform Add Intel KIXRP435 Reference Platform based on IXP43x processor. Fixed after review : access to cp15 removed in identification functions, used access to global processor_id instead Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-06 22:00:31 +08:00
config MACH_KIXRP435
bool "KIXRP435"
help
Say 'Y' here if you want your kernel to support Intel's
KIXRP435 Reference Platform.
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
# number from the bootloader due to marketing monkeys, so we just enable it
# by default if IXDP425 is enabled.
#
config ARCH_IXCDP1100
bool
depends on ARCH_IXDP425
default y
config ARCH_PRPMC1100
bool "PrPMC1100"
help
Say 'Y' here if you want your kernel to support the Motorola
PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/IXP4xx>.
[ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine support Patch from Rod Whitby This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product. The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card. Work on porting the latest 2.6.x kernel to this device is being done by the NSLU2-Linux project (the same team who maintains the port to the Linksys NSLU2 device). In particular, the majority of this patch was authored by Alessandro Zummo, based on the work done for MACH_NSLU2 support by the NSLU2-Linux core team of developers. MACH_NAS100D (as implemented by this patch) can be enabled in jumbo ixp4xx kernels without any affect on the other machines supported by that kernel. This patch applies cleanly against 2.6.15-rc7 and should be trivial to apply to later kernel versions. It does not depend upon any other patches. Modified files (and number of lines inserted): arch/arm/mach-ixp4xx/Kconfig | 8 arch/arm/mach-ixp4xx/Makefile | 1 include/asm-arm/arch-ixp4xx/hardware.h | 1 include/asm-arm/arch-ixp4xx/irqs.h | 9 include/asm-arm/arch-ixp4xx/nas100d.h | 75 arch/arm/mach-ixp4xx/nas100d-pci.c | 77 arch/arm/mach-ixp4xx/nas100d-power.c | 69 arch/arm/mach-ixp4xx/nas100d-setup.c | 133 -- Rod Whitby (NSLU2-Linux project lead) Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 01:17:11 +08:00
config MACH_NAS100D
bool
prompt "NAS100D"
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 22:34:29 +08:00
select PCI
[ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine support Patch from Rod Whitby This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product. The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card. Work on porting the latest 2.6.x kernel to this device is being done by the NSLU2-Linux project (the same team who maintains the port to the Linksys NSLU2 device). In particular, the majority of this patch was authored by Alessandro Zummo, based on the work done for MACH_NSLU2 support by the NSLU2-Linux core team of developers. MACH_NAS100D (as implemented by this patch) can be enabled in jumbo ixp4xx kernels without any affect on the other machines supported by that kernel. This patch applies cleanly against 2.6.15-rc7 and should be trivial to apply to later kernel versions. It does not depend upon any other patches. Modified files (and number of lines inserted): arch/arm/mach-ixp4xx/Kconfig | 8 arch/arm/mach-ixp4xx/Makefile | 1 include/asm-arm/arch-ixp4xx/hardware.h | 1 include/asm-arm/arch-ixp4xx/irqs.h | 9 include/asm-arm/arch-ixp4xx/nas100d.h | 75 arch/arm/mach-ixp4xx/nas100d-pci.c | 77 arch/arm/mach-ixp4xx/nas100d-power.c | 69 arch/arm/mach-ixp4xx/nas100d-setup.c | 133 -- Rod Whitby (NSLU2-Linux project lead) Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 01:17:11 +08:00
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
[ARM] 4318/2: DSM-G600 Board Support This patch adds support for the D-Link DSM-G600 Rev A. This is an ARM XScale IXP4xx system relatively similar to the NSLU2 and NAS-100D already supported by mainline. An important difference is Gigabit Ethernet support using the Via Velocity chipset. This patch is the combined work of Michael Westerhof and Alessandro Zummo, with contributions from Michael-Luke Jones. This version addresses review comments from rmk and Deepak Saxena. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-28 15:31:40 +08:00
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
select PCI
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config ARCH_IXDP4XX
bool
[ARM] 4311/1: ixp4xx: add KIXRP435 platform Add Intel KIXRP435 Reference Platform based on IXP43x processor. Fixed after review : access to cp15 removed in identification functions, used access to global processor_id instead Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-06 22:00:31 +08:00
depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default y
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 17:53:23 +08:00
config MACH_FSG
bool
prompt "Freecom FSG-3"
select PCI
help
Say 'Y' here if you want your kernel to support Freecom's
FSG-3 device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/FSG3/HomePage
ixp4xx: base support for Arcom Vulcan This patch adds some basic support for the Arcom Vulcan (ixp425 based). Supported devices include: - XR16L551 serial ports - External watchdog - Flash - SRAM - 1-wire id Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-04-11 04:32:38 +08:00
config MACH_ARCOM_VULCAN
bool
prompt "Arcom/Eurotech Vulcan"
select PCI
help
Say 'Y' here if you want your kernel to support Arcom's
Vulcan board.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
#
config CPU_IXP46X
bool
depends on MACH_IXDP465
default y
[ARM] 4311/1: ixp4xx: add KIXRP435 platform Add Intel KIXRP435 Reference Platform based on IXP43x processor. Fixed after review : access to cp15 removed in identification functions, used access to global processor_id instead Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-06 22:00:31 +08:00
config CPU_IXP43X
bool
depends on MACH_KIXRP435
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 22:34:29 +08:00
select PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
This board is currently inside the Linksys WRV54G Gateways.
IXP425 - 266mhz
32mb SDRAM
8mb Flash
miniPCI slot 0 does not have a card connector soldered to the board
miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
npe0 is connected to a Kendin KS8995M Switch (4 ports)
npe1 is the "wan" port
"Console" UART is available on J11 as console
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
ixp4xx: support omicron ixp425 based boards This patch adds board support for the DEVIXP, the MICCPT, and the MIC256, which are three IXP425 based boards produced by OMICRON electronics, GmbH. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-28 21:16:41 +08:00
config MACH_DEVIXP
bool "Omicron DEVIXP"
help
Say 'Y' here if you want your kernel to support the DEVIXP
board from OMICRON electronics GmbH.
config MACH_MICCPT
bool "Omicron MICCPT"
select PCI
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
config MACH_MIC256
bool "Omicron MIC256"
help
Say 'Y' here if you want your kernel to support the MIC256
board from OMICRON electronics GmbH.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
[ARM] 3487/1: IXP4xx: Support non-PCI systems Patch from Deepak Saxena This patch allows for the addition of IXP4xx systems that do not make use of the PCI interface by moving the CONFIG_PCI symbol selection to be platform-specific instead of for all of IXP4xx. If at least one machine with PCI support is built, the PCI code will be compiled in, but when building !PCI, this will drastically shrink the kernel size. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 22:34:29 +08:00
depends on PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
IXP4xx provides two methods of accessing PCI memory space:
IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx CPUs can indirectly access the whole 4 GB PCI MMIO address space (using the non-prefetch registers). Previously the available space depended on the CPU variant, since one of the IXP43x platforms needed more than the usual 128 MB. 1 GB should be enough for everyone, and if not, we can trivially increase it. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-11-16 01:02:10 +08:00
1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
To access PCI via this space, we simply ioremap() the BAR
into the kernel and we can use the standard read[bwl]/write[bwl]
macros. This is the preferred method due to speed but it
IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx CPUs can indirectly access the whole 4 GB PCI MMIO address space (using the non-prefetch registers). Previously the available space depended on the CPU variant, since one of the IXP43x platforms needed more than the usual 128 MB. 1 GB should be enough for everyone, and if not, we can trivially increase it. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-11-16 01:02:10 +08:00
limits the system to just 64MB of PCI memory. This can be
Fix misc Kconfig typos Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 12:22:59 +08:00
problematic if using video cards and other memory-heavy devices.
IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx CPUs can indirectly access the whole 4 GB PCI MMIO address space (using the non-prefetch registers). Previously the available space depended on the CPU variant, since one of the IXP43x platforms needed more than the usual 128 MB. 1 GB should be enough for everyone, and if not, we can trivially increase it. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-11-16 01:02:10 +08:00
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access the whole PCI
memory space. This currently allows for up to 1 GB (0x10000000
to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
is that every PCI access requires three local register accesses
plus a spinlock, but in some cases the performance hit is
acceptable. In addition, you cannot mmap() PCI devices in this
case due to the indirect nature of the PCI window.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
By default, the direct method is used. Choose this option if you
need to use the indirect method instead. If you don't know
what you need, leave this option unselected.
[ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features This patch adds drivers for IXP4xx hardware Queue Manager and for Network Processor Engines. Requires patch #4712 (reading/writing CPU feature (aka fuse) bits). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-02 04:55:23 +08:00
config IXP4XX_QMGR
tristate "IXP4xx Queue Manager support"
help
This driver supports IXP4xx built-in hardware queue manager
and is automatically selected by Ethernet and HSS drivers.
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select FW_LOADER
ARM: config: sort select statements alphanumerically As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-07 00:12:25 +08:00
select HOTPLUG
[ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features This patch adds drivers for IXP4xx hardware Queue Manager and for Network Processor Engines. Requires patch #4712 (reading/writing CPU feature (aka fuse) bits). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-02 04:55:23 +08:00
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
endif
Reference in New Issue Copy Permalink