drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2012 Red Hat Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the
|
|
|
|
* "Software"), to deal in the Software without restriction, including
|
|
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
* the following conditions:
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
|
|
|
|
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
|
|
|
|
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
|
|
|
|
* USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the
|
|
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
|
|
* of the Software.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Authors: Dave Airlie <airlied@redhat.com>
|
|
|
|
*/
|
|
|
|
#ifndef __AST_DRV_H__
|
|
|
|
#define __AST_DRV_H__
|
|
|
|
|
2012-10-03 01:01:07 +08:00
|
|
|
#include <drm/drm_fb_helper.h>
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
|
2012-10-03 01:01:07 +08:00
|
|
|
#include <drm/ttm/ttm_bo_api.h>
|
|
|
|
#include <drm/ttm/ttm_bo_driver.h>
|
|
|
|
#include <drm/ttm/ttm_placement.h>
|
|
|
|
#include <drm/ttm/ttm_memory.h>
|
|
|
|
#include <drm/ttm/ttm_module.h>
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
|
2014-09-23 21:46:53 +08:00
|
|
|
#include <drm/drm_gem.h>
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/i2c-algo-bit.h>
|
|
|
|
|
|
|
|
#define DRIVER_AUTHOR "Dave Airlie"
|
|
|
|
|
|
|
|
#define DRIVER_NAME "ast"
|
|
|
|
#define DRIVER_DESC "AST"
|
|
|
|
#define DRIVER_DATE "20120228"
|
|
|
|
|
|
|
|
#define DRIVER_MAJOR 0
|
|
|
|
#define DRIVER_MINOR 1
|
|
|
|
#define DRIVER_PATCHLEVEL 0
|
|
|
|
|
|
|
|
#define PCI_CHIP_AST2000 0x2000
|
|
|
|
#define PCI_CHIP_AST2100 0x2010
|
|
|
|
#define PCI_CHIP_AST1180 0x1180
|
|
|
|
|
|
|
|
|
|
|
|
enum ast_chip {
|
|
|
|
AST2000,
|
|
|
|
AST2100,
|
|
|
|
AST1100,
|
|
|
|
AST2200,
|
|
|
|
AST2150,
|
|
|
|
AST2300,
|
2014-03-28 07:18:45 +08:00
|
|
|
AST2400,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
AST1180,
|
|
|
|
};
|
|
|
|
|
2014-03-28 09:05:12 +08:00
|
|
|
enum ast_tx_chip {
|
|
|
|
AST_TX_NONE,
|
|
|
|
AST_TX_SIL164,
|
|
|
|
AST_TX_ITE66121,
|
|
|
|
AST_TX_DP501,
|
|
|
|
};
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
#define AST_DRAM_512Mx16 0
|
|
|
|
#define AST_DRAM_1Gx16 1
|
|
|
|
#define AST_DRAM_512Mx32 2
|
|
|
|
#define AST_DRAM_1Gx32 3
|
|
|
|
#define AST_DRAM_2Gx16 6
|
|
|
|
#define AST_DRAM_4Gx16 7
|
|
|
|
|
|
|
|
struct ast_fbdev;
|
|
|
|
|
|
|
|
struct ast_private {
|
|
|
|
struct drm_device *dev;
|
|
|
|
|
|
|
|
void __iomem *regs;
|
|
|
|
void __iomem *ioregs;
|
|
|
|
|
|
|
|
enum ast_chip chip;
|
|
|
|
bool vga2_clone;
|
|
|
|
uint32_t dram_bus_width;
|
|
|
|
uint32_t dram_type;
|
|
|
|
uint32_t mclk;
|
|
|
|
uint32_t vram_size;
|
|
|
|
|
|
|
|
struct ast_fbdev *fbdev;
|
|
|
|
|
|
|
|
int fb_mtrr;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
struct drm_global_reference mem_global_ref;
|
|
|
|
struct ttm_bo_global_ref bo_global_ref;
|
|
|
|
struct ttm_bo_device bdev;
|
|
|
|
} ttm;
|
|
|
|
|
|
|
|
struct drm_gem_object *cursor_cache;
|
|
|
|
uint64_t cursor_cache_gpu_addr;
|
drm: only take the crtc lock for ->cursor_set
First convert ->cursor_set to only take the crtc lock, since that
seems to be the function with the least amount of state - the core
ioctl function doesn't check anything which can change at runtime, so
we don't have any object lifetime issues to contend.
The only thing which is important is that the driver's implementation
doesn't touch any state outside of that single crtc which is not yet
properly protected by other locking:
- ast: access the global ast->cache_kmap. Luckily we only have on crtc
on this driver, so this is fine. Add a comment.
- gma500: calls gma_power_begin|and and psb_gtt_pin|unpin, both which
have their own locking to protect their state. Everything else is
crtc-local.
- i915: touches a bit of global gem state, all protected by the One
Lock to Rule Them All (dev->struct_mutex).
- nouveau: Pre-nv50 is all nice, nv50+ uses the evo channels to queue
up all display changes. And some of these channels are device
global. But this is fine now since the previous patch introduced an
evo channel mutex.
- radeon: Uses some indirect register access for cursor updates, but
with the previous patches to protect these indirect 2-register
access patterns with a spinlock, this should be fine now, too.
- vmwgfx: I have no idea how that works - update_cursor_position
doesn't take any per-crtc argument and I haven't figured out any
other place where this could be set in some form of a side-channel.
But vmwgfx definitely has more than one crtc (or at least can
register more than one), so I have no idea how this is supposed to
not fail with the current code already. Hence take the easy way out
and simply acquire all locks (which requires dropping the crtc lock
the core acquired for us). That way it's not worse off for
consistency than the old code.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-02 20:48:21 +08:00
|
|
|
/* Acces to this cache is protected by the crtc->mutex of the only crtc
|
|
|
|
* we have. */
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
struct ttm_bo_kmap_obj cache_kmap;
|
|
|
|
int next_cursor;
|
2014-01-17 08:56:09 +08:00
|
|
|
bool support_wide_screen;
|
2014-03-28 09:05:12 +08:00
|
|
|
|
|
|
|
enum ast_tx_chip tx_chip_type;
|
|
|
|
u8 dp501_maxclk;
|
|
|
|
u8 *dp501_fw_addr;
|
|
|
|
const struct firmware *dp501_fw; /* dp501 fw */
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
int ast_driver_load(struct drm_device *dev, unsigned long flags);
|
|
|
|
int ast_driver_unload(struct drm_device *dev);
|
|
|
|
|
|
|
|
struct ast_gem_object;
|
|
|
|
|
|
|
|
#define AST_IO_AR_PORT_WRITE (0x40)
|
|
|
|
#define AST_IO_MISC_PORT_WRITE (0x42)
|
2014-09-04 15:44:18 +08:00
|
|
|
#define AST_IO_VGA_ENABLE_PORT (0x43)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
#define AST_IO_SEQ_PORT (0x44)
|
2014-09-04 15:44:18 +08:00
|
|
|
#define AST_IO_DAC_INDEX_READ (0x47)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
#define AST_IO_DAC_INDEX_WRITE (0x48)
|
|
|
|
#define AST_IO_DAC_DATA (0x49)
|
|
|
|
#define AST_IO_GR_PORT (0x4E)
|
|
|
|
#define AST_IO_CRTC_PORT (0x54)
|
|
|
|
#define AST_IO_INPUT_STATUS1_READ (0x5A)
|
|
|
|
#define AST_IO_MISC_PORT_READ (0x4C)
|
|
|
|
|
2014-09-04 15:44:18 +08:00
|
|
|
#define AST_IO_MM_OFFSET (0x380)
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
#define __ast_read(x) \
|
|
|
|
static inline u##x ast_read##x(struct ast_private *ast, u32 reg) { \
|
|
|
|
u##x val = 0;\
|
|
|
|
val = ioread##x(ast->regs + reg); \
|
|
|
|
return val;\
|
|
|
|
}
|
|
|
|
|
|
|
|
__ast_read(8);
|
|
|
|
__ast_read(16);
|
|
|
|
__ast_read(32)
|
|
|
|
|
|
|
|
#define __ast_io_read(x) \
|
|
|
|
static inline u##x ast_io_read##x(struct ast_private *ast, u32 reg) { \
|
|
|
|
u##x val = 0;\
|
|
|
|
val = ioread##x(ast->ioregs + reg); \
|
|
|
|
return val;\
|
|
|
|
}
|
|
|
|
|
|
|
|
__ast_io_read(8);
|
|
|
|
__ast_io_read(16);
|
|
|
|
__ast_io_read(32);
|
|
|
|
|
|
|
|
#define __ast_write(x) \
|
|
|
|
static inline void ast_write##x(struct ast_private *ast, u32 reg, u##x val) {\
|
|
|
|
iowrite##x(val, ast->regs + reg);\
|
|
|
|
}
|
|
|
|
|
|
|
|
__ast_write(8);
|
|
|
|
__ast_write(16);
|
|
|
|
__ast_write(32);
|
|
|
|
|
|
|
|
#define __ast_io_write(x) \
|
|
|
|
static inline void ast_io_write##x(struct ast_private *ast, u32 reg, u##x val) {\
|
|
|
|
iowrite##x(val, ast->ioregs + reg);\
|
|
|
|
}
|
|
|
|
|
|
|
|
__ast_io_write(8);
|
|
|
|
__ast_io_write(16);
|
|
|
|
#undef __ast_io_write
|
|
|
|
|
|
|
|
static inline void ast_set_index_reg(struct ast_private *ast,
|
|
|
|
uint32_t base, uint8_t index,
|
|
|
|
uint8_t val)
|
|
|
|
{
|
|
|
|
ast_io_write16(ast, base, ((u16)val << 8) | index);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ast_set_index_reg_mask(struct ast_private *ast,
|
|
|
|
uint32_t base, uint8_t index,
|
|
|
|
uint8_t mask, uint8_t val);
|
|
|
|
uint8_t ast_get_index_reg(struct ast_private *ast,
|
|
|
|
uint32_t base, uint8_t index);
|
|
|
|
uint8_t ast_get_index_reg_mask(struct ast_private *ast,
|
|
|
|
uint32_t base, uint8_t index, uint8_t mask);
|
|
|
|
|
|
|
|
static inline void ast_open_key(struct ast_private *ast)
|
|
|
|
{
|
2013-09-12 13:31:04 +08:00
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x80, 0xA8);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#define AST_VIDMEM_SIZE_8M 0x00800000
|
|
|
|
#define AST_VIDMEM_SIZE_16M 0x01000000
|
|
|
|
#define AST_VIDMEM_SIZE_32M 0x02000000
|
|
|
|
#define AST_VIDMEM_SIZE_64M 0x04000000
|
|
|
|
#define AST_VIDMEM_SIZE_128M 0x08000000
|
|
|
|
|
|
|
|
#define AST_VIDMEM_DEFAULT_SIZE AST_VIDMEM_SIZE_8M
|
|
|
|
|
|
|
|
#define AST_MAX_HWC_WIDTH 64
|
|
|
|
#define AST_MAX_HWC_HEIGHT 64
|
|
|
|
|
|
|
|
#define AST_HWC_SIZE (AST_MAX_HWC_WIDTH*AST_MAX_HWC_HEIGHT*2)
|
|
|
|
#define AST_HWC_SIGNATURE_SIZE 32
|
|
|
|
|
|
|
|
#define AST_DEFAULT_HWC_NUM 2
|
|
|
|
/* define for signature structure */
|
|
|
|
#define AST_HWC_SIGNATURE_CHECKSUM 0x00
|
|
|
|
#define AST_HWC_SIGNATURE_SizeX 0x04
|
|
|
|
#define AST_HWC_SIGNATURE_SizeY 0x08
|
|
|
|
#define AST_HWC_SIGNATURE_X 0x0C
|
|
|
|
#define AST_HWC_SIGNATURE_Y 0x10
|
|
|
|
#define AST_HWC_SIGNATURE_HOTSPOTX 0x14
|
|
|
|
#define AST_HWC_SIGNATURE_HOTSPOTY 0x18
|
|
|
|
|
|
|
|
|
|
|
|
struct ast_i2c_chan {
|
|
|
|
struct i2c_adapter adapter;
|
|
|
|
struct drm_device *dev;
|
|
|
|
struct i2c_algo_bit_data bit;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_connector {
|
|
|
|
struct drm_connector base;
|
|
|
|
struct ast_i2c_chan *i2c;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_crtc {
|
|
|
|
struct drm_crtc base;
|
|
|
|
u8 lut_r[256], lut_g[256], lut_b[256];
|
|
|
|
struct drm_gem_object *cursor_bo;
|
|
|
|
uint64_t cursor_addr;
|
|
|
|
int cursor_width, cursor_height;
|
|
|
|
u8 offset_x, offset_y;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_encoder {
|
|
|
|
struct drm_encoder base;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_framebuffer {
|
|
|
|
struct drm_framebuffer base;
|
|
|
|
struct drm_gem_object *obj;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_fbdev {
|
|
|
|
struct drm_fb_helper helper;
|
|
|
|
struct ast_framebuffer afb;
|
|
|
|
void *sysram;
|
|
|
|
int size;
|
|
|
|
struct ttm_bo_kmap_obj mapping;
|
2013-05-02 14:40:25 +08:00
|
|
|
int x1, y1, x2, y2; /* dirty rect */
|
|
|
|
spinlock_t dirty_lock;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define to_ast_crtc(x) container_of(x, struct ast_crtc, base)
|
|
|
|
#define to_ast_connector(x) container_of(x, struct ast_connector, base)
|
|
|
|
#define to_ast_encoder(x) container_of(x, struct ast_encoder, base)
|
|
|
|
#define to_ast_framebuffer(x) container_of(x, struct ast_framebuffer, base)
|
|
|
|
|
|
|
|
struct ast_vbios_stdtable {
|
|
|
|
u8 misc;
|
|
|
|
u8 seq[4];
|
|
|
|
u8 crtc[25];
|
|
|
|
u8 ar[20];
|
|
|
|
u8 gr[9];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_vbios_enhtable {
|
|
|
|
u32 ht;
|
|
|
|
u32 hde;
|
|
|
|
u32 hfp;
|
|
|
|
u32 hsync;
|
|
|
|
u32 vt;
|
|
|
|
u32 vde;
|
|
|
|
u32 vfp;
|
|
|
|
u32 vsync;
|
|
|
|
u32 dclk_index;
|
|
|
|
u32 flags;
|
|
|
|
u32 refresh_rate;
|
|
|
|
u32 refresh_rate_index;
|
|
|
|
u32 mode_id;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_vbios_dclk_info {
|
|
|
|
u8 param1;
|
|
|
|
u8 param2;
|
|
|
|
u8 param3;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ast_vbios_mode_info {
|
|
|
|
struct ast_vbios_stdtable *std_table;
|
|
|
|
struct ast_vbios_enhtable *enh_table;
|
|
|
|
};
|
|
|
|
|
|
|
|
extern int ast_mode_init(struct drm_device *dev);
|
|
|
|
extern void ast_mode_fini(struct drm_device *dev);
|
|
|
|
|
|
|
|
int ast_framebuffer_init(struct drm_device *dev,
|
|
|
|
struct ast_framebuffer *ast_fb,
|
2015-11-12 01:11:29 +08:00
|
|
|
const struct drm_mode_fb_cmd2 *mode_cmd,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
struct drm_gem_object *obj);
|
|
|
|
|
|
|
|
int ast_fbdev_init(struct drm_device *dev);
|
|
|
|
void ast_fbdev_fini(struct drm_device *dev);
|
|
|
|
void ast_fbdev_set_suspend(struct drm_device *dev, int state);
|
2014-06-11 20:59:55 +08:00
|
|
|
void ast_fbdev_set_base(struct ast_private *ast, unsigned long gpu_addr);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
|
|
|
|
struct ast_bo {
|
|
|
|
struct ttm_buffer_object bo;
|
|
|
|
struct ttm_placement placement;
|
|
|
|
struct ttm_bo_kmap_obj kmap;
|
|
|
|
struct drm_gem_object gem;
|
2014-08-27 19:16:04 +08:00
|
|
|
struct ttm_place placements[3];
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
int pin_count;
|
|
|
|
};
|
|
|
|
#define gem_to_ast_bo(gobj) container_of((gobj), struct ast_bo, gem)
|
|
|
|
|
|
|
|
static inline struct ast_bo *
|
|
|
|
ast_bo(struct ttm_buffer_object *bo)
|
|
|
|
{
|
|
|
|
return container_of(bo, struct ast_bo, bo);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#define to_ast_obj(x) container_of(x, struct ast_gem_object, base)
|
|
|
|
|
|
|
|
#define AST_MM_ALIGN_SHIFT 4
|
|
|
|
#define AST_MM_ALIGN_MASK ((1 << AST_MM_ALIGN_SHIFT) - 1)
|
|
|
|
|
|
|
|
extern int ast_dumb_create(struct drm_file *file,
|
|
|
|
struct drm_device *dev,
|
|
|
|
struct drm_mode_create_dumb *args);
|
|
|
|
|
|
|
|
extern void ast_gem_free_object(struct drm_gem_object *obj);
|
|
|
|
extern int ast_dumb_mmap_offset(struct drm_file *file,
|
|
|
|
struct drm_device *dev,
|
|
|
|
uint32_t handle,
|
|
|
|
uint64_t *offset);
|
|
|
|
|
|
|
|
#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
|
|
|
|
|
|
|
|
int ast_mm_init(struct ast_private *ast);
|
|
|
|
void ast_mm_fini(struct ast_private *ast);
|
|
|
|
|
|
|
|
int ast_bo_create(struct drm_device *dev, int size, int align,
|
|
|
|
uint32_t flags, struct ast_bo **pastbo);
|
|
|
|
|
|
|
|
int ast_gem_create(struct drm_device *dev,
|
|
|
|
u32 size, bool iskernel,
|
|
|
|
struct drm_gem_object **obj);
|
|
|
|
|
|
|
|
int ast_bo_pin(struct ast_bo *bo, u32 pl_flag, u64 *gpu_addr);
|
|
|
|
int ast_bo_unpin(struct ast_bo *bo);
|
|
|
|
|
2013-06-27 19:48:20 +08:00
|
|
|
static inline int ast_bo_reserve(struct ast_bo *bo, bool no_wait)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2016-04-06 17:12:03 +08:00
|
|
|
ret = ttm_bo_reserve(&bo->bo, true, no_wait, NULL);
|
2013-06-27 19:48:20 +08:00
|
|
|
if (ret) {
|
|
|
|
if (ret != -ERESTARTSYS && ret != -EBUSY)
|
|
|
|
DRM_ERROR("reserve failed %p\n", bo);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void ast_bo_unreserve(struct ast_bo *bo)
|
|
|
|
{
|
|
|
|
ttm_bo_unreserve(&bo->bo);
|
|
|
|
}
|
|
|
|
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
void ast_ttm_placement(struct ast_bo *bo, int domain);
|
|
|
|
int ast_bo_push_sysram(struct ast_bo *bo);
|
|
|
|
int ast_mmap(struct file *filp, struct vm_area_struct *vma);
|
|
|
|
|
|
|
|
/* ast post */
|
2014-09-04 15:50:11 +08:00
|
|
|
void ast_enable_vga(struct drm_device *dev);
|
|
|
|
void ast_enable_mmio(struct drm_device *dev);
|
|
|
|
bool ast_is_vga_enabled(struct drm_device *dev);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
void ast_post_gpu(struct drm_device *dev);
|
2014-03-28 09:05:12 +08:00
|
|
|
u32 ast_mindwm(struct ast_private *ast, u32 r);
|
|
|
|
void ast_moutdwm(struct ast_private *ast, u32 r, u32 v);
|
|
|
|
/* ast dp501 */
|
|
|
|
int ast_load_dp501_microcode(struct drm_device *dev);
|
|
|
|
void ast_set_dp501_video_output(struct drm_device *dev, u8 mode);
|
|
|
|
bool ast_launch_m68k(struct drm_device *dev);
|
|
|
|
bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size);
|
|
|
|
bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata);
|
|
|
|
u8 ast_get_dp501_max_clk(struct drm_device *dev);
|
|
|
|
void ast_init_3rdtx(struct drm_device *dev);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
|
|
|
#endif
|