linux/fs/f2fs/namei.c

1335 lines
31 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* fs/f2fs/namei.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*/
#include <linux/fs.h>
#include <linux/f2fs_fs.h>
#include <linux/pagemap.h>
#include <linux/sched.h>
#include <linux/ctype.h>
#include <linux/random.h>
#include <linux/dcache.h>
#include <linux/namei.h>
#include <linux/quotaops.h>
#include "f2fs.h"
#include "node.h"
#include "segment.h"
#include "xattr.h"
#include "acl.h"
#include <trace/events/f2fs.h>
static struct inode *f2fs_new_inode(struct inode *dir, umode_t mode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
nid_t ino;
struct inode *inode;
bool nid_free = false;
f2fs: use fscrypt_prepare_new_inode() and fscrypt_set_context() Convert f2fs to use the new functions fscrypt_prepare_new_inode() and fscrypt_set_context(). This avoids calling fscrypt_get_encryption_info() from under f2fs_lock_op(), which can deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe. For more details about this problem, see the earlier patch "fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()". This also fixes a f2fs-specific deadlock when the filesystem is mounted with '-o test_dummy_encryption' and a file is created in an unencrypted directory other than the root directory: INFO: task touch:207 blocked for more than 30 seconds. Not tainted 5.9.0-rc4-00099-g729e3d0919844 #2 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:touch state:D stack: 0 pid: 207 ppid: 167 flags:0x00000000 Call Trace: [...] lock_page include/linux/pagemap.h:548 [inline] pagecache_get_page+0x25e/0x310 mm/filemap.c:1682 find_or_create_page include/linux/pagemap.h:348 [inline] grab_cache_page include/linux/pagemap.h:424 [inline] f2fs_grab_cache_page fs/f2fs/f2fs.h:2395 [inline] f2fs_grab_cache_page fs/f2fs/f2fs.h:2373 [inline] __get_node_page.part.0+0x39/0x2d0 fs/f2fs/node.c:1350 __get_node_page fs/f2fs/node.c:35 [inline] f2fs_get_node_page+0x2e/0x60 fs/f2fs/node.c:1399 read_inline_xattr+0x88/0x140 fs/f2fs/xattr.c:288 lookup_all_xattrs+0x1f9/0x2c0 fs/f2fs/xattr.c:344 f2fs_getxattr+0x9b/0x160 fs/f2fs/xattr.c:532 f2fs_get_context+0x1e/0x20 fs/f2fs/super.c:2460 fscrypt_get_encryption_info+0x9b/0x450 fs/crypto/keysetup.c:472 fscrypt_inherit_context+0x2f/0xb0 fs/crypto/policy.c:640 f2fs_init_inode_metadata+0xab/0x340 fs/f2fs/dir.c:540 f2fs_add_inline_entry+0x145/0x390 fs/f2fs/inline.c:621 f2fs_add_dentry+0x31/0x80 fs/f2fs/dir.c:757 f2fs_do_add_link+0xcd/0x130 fs/f2fs/dir.c:798 f2fs_add_link fs/f2fs/f2fs.h:3234 [inline] f2fs_create+0x104/0x290 fs/f2fs/namei.c:344 lookup_open.isra.0+0x2de/0x500 fs/namei.c:3103 open_last_lookups+0xa9/0x340 fs/namei.c:3177 path_openat+0x8f/0x1b0 fs/namei.c:3365 do_filp_open+0x87/0x130 fs/namei.c:3395 do_sys_openat2+0x96/0x150 fs/open.c:1168 [...] That happened because f2fs_add_inline_entry() locks the directory inode's page in order to add the dentry, then f2fs_get_context() tries to lock it recursively in order to read the encryption xattr. This problem is specific to "test_dummy_encryption" because normally the directory's fscrypt_info would be set up prior to f2fs_add_inline_entry() in order to encrypt the new filename. Regardless, the new design fixes this test_dummy_encryption deadlock as well as potential deadlocks with fs reclaim, by setting up any needed fscrypt_info structs prior to taking so many locks. The test_dummy_encryption deadlock was reported by Daniel Rosenberg. Reported-by: Daniel Rosenberg <drosen@google.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 12:11:27 +08:00
bool encrypt = false;
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
int xattr_size = 0;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
int err;
inode = new_inode(dir->i_sb);
if (!inode)
return ERR_PTR(-ENOMEM);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
if (!f2fs_alloc_nid(sbi, &ino)) {
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_unlock_op(sbi);
err = -ENOSPC;
goto fail;
}
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_unlock_op(sbi);
nid_free = true;
inode_init_owner(inode, dir, mode);
inode->i_ino = ino;
inode->i_blocks = 0;
vfs: change inode times to use struct timespec64 struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-09 10:36:02 +08:00
inode->i_mtime = inode->i_atime = inode->i_ctime = current_time(inode);
F2FS_I(inode)->i_crtime = inode->i_mtime;
inode->i_generation = prandom_u32();
if (S_ISDIR(inode->i_mode))
F2FS_I(inode)->i_current_depth = 1;
err = insert_inode_locked(inode);
if (err) {
err = -EINVAL;
goto fail;
}
if (f2fs_sb_has_project_quota(sbi) &&
(F2FS_I(dir)->i_flags & F2FS_PROJINHERIT_FL))
F2FS_I(inode)->i_projid = F2FS_I(dir)->i_projid;
else
F2FS_I(inode)->i_projid = make_kprojid(&init_user_ns,
F2FS_DEF_PROJID);
f2fs: use fscrypt_prepare_new_inode() and fscrypt_set_context() Convert f2fs to use the new functions fscrypt_prepare_new_inode() and fscrypt_set_context(). This avoids calling fscrypt_get_encryption_info() from under f2fs_lock_op(), which can deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe. For more details about this problem, see the earlier patch "fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()". This also fixes a f2fs-specific deadlock when the filesystem is mounted with '-o test_dummy_encryption' and a file is created in an unencrypted directory other than the root directory: INFO: task touch:207 blocked for more than 30 seconds. Not tainted 5.9.0-rc4-00099-g729e3d0919844 #2 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:touch state:D stack: 0 pid: 207 ppid: 167 flags:0x00000000 Call Trace: [...] lock_page include/linux/pagemap.h:548 [inline] pagecache_get_page+0x25e/0x310 mm/filemap.c:1682 find_or_create_page include/linux/pagemap.h:348 [inline] grab_cache_page include/linux/pagemap.h:424 [inline] f2fs_grab_cache_page fs/f2fs/f2fs.h:2395 [inline] f2fs_grab_cache_page fs/f2fs/f2fs.h:2373 [inline] __get_node_page.part.0+0x39/0x2d0 fs/f2fs/node.c:1350 __get_node_page fs/f2fs/node.c:35 [inline] f2fs_get_node_page+0x2e/0x60 fs/f2fs/node.c:1399 read_inline_xattr+0x88/0x140 fs/f2fs/xattr.c:288 lookup_all_xattrs+0x1f9/0x2c0 fs/f2fs/xattr.c:344 f2fs_getxattr+0x9b/0x160 fs/f2fs/xattr.c:532 f2fs_get_context+0x1e/0x20 fs/f2fs/super.c:2460 fscrypt_get_encryption_info+0x9b/0x450 fs/crypto/keysetup.c:472 fscrypt_inherit_context+0x2f/0xb0 fs/crypto/policy.c:640 f2fs_init_inode_metadata+0xab/0x340 fs/f2fs/dir.c:540 f2fs_add_inline_entry+0x145/0x390 fs/f2fs/inline.c:621 f2fs_add_dentry+0x31/0x80 fs/f2fs/dir.c:757 f2fs_do_add_link+0xcd/0x130 fs/f2fs/dir.c:798 f2fs_add_link fs/f2fs/f2fs.h:3234 [inline] f2fs_create+0x104/0x290 fs/f2fs/namei.c:344 lookup_open.isra.0+0x2de/0x500 fs/namei.c:3103 open_last_lookups+0xa9/0x340 fs/namei.c:3177 path_openat+0x8f/0x1b0 fs/namei.c:3365 do_filp_open+0x87/0x130 fs/namei.c:3395 do_sys_openat2+0x96/0x150 fs/open.c:1168 [...] That happened because f2fs_add_inline_entry() locks the directory inode's page in order to add the dentry, then f2fs_get_context() tries to lock it recursively in order to read the encryption xattr. This problem is specific to "test_dummy_encryption" because normally the directory's fscrypt_info would be set up prior to f2fs_add_inline_entry() in order to encrypt the new filename. Regardless, the new design fixes this test_dummy_encryption deadlock as well as potential deadlocks with fs reclaim, by setting up any needed fscrypt_info structs prior to taking so many locks. The test_dummy_encryption deadlock was reported by Daniel Rosenberg. Reported-by: Daniel Rosenberg <drosen@google.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 12:11:27 +08:00
err = fscrypt_prepare_new_inode(dir, inode, &encrypt);
if (err)
goto fail_drop;
err = dquot_initialize(inode);
if (err)
goto fail_drop;
set_inode_flag(inode, FI_NEW_INODE);
f2fs: use fscrypt_prepare_new_inode() and fscrypt_set_context() Convert f2fs to use the new functions fscrypt_prepare_new_inode() and fscrypt_set_context(). This avoids calling fscrypt_get_encryption_info() from under f2fs_lock_op(), which can deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe. For more details about this problem, see the earlier patch "fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()". This also fixes a f2fs-specific deadlock when the filesystem is mounted with '-o test_dummy_encryption' and a file is created in an unencrypted directory other than the root directory: INFO: task touch:207 blocked for more than 30 seconds. Not tainted 5.9.0-rc4-00099-g729e3d0919844 #2 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:touch state:D stack: 0 pid: 207 ppid: 167 flags:0x00000000 Call Trace: [...] lock_page include/linux/pagemap.h:548 [inline] pagecache_get_page+0x25e/0x310 mm/filemap.c:1682 find_or_create_page include/linux/pagemap.h:348 [inline] grab_cache_page include/linux/pagemap.h:424 [inline] f2fs_grab_cache_page fs/f2fs/f2fs.h:2395 [inline] f2fs_grab_cache_page fs/f2fs/f2fs.h:2373 [inline] __get_node_page.part.0+0x39/0x2d0 fs/f2fs/node.c:1350 __get_node_page fs/f2fs/node.c:35 [inline] f2fs_get_node_page+0x2e/0x60 fs/f2fs/node.c:1399 read_inline_xattr+0x88/0x140 fs/f2fs/xattr.c:288 lookup_all_xattrs+0x1f9/0x2c0 fs/f2fs/xattr.c:344 f2fs_getxattr+0x9b/0x160 fs/f2fs/xattr.c:532 f2fs_get_context+0x1e/0x20 fs/f2fs/super.c:2460 fscrypt_get_encryption_info+0x9b/0x450 fs/crypto/keysetup.c:472 fscrypt_inherit_context+0x2f/0xb0 fs/crypto/policy.c:640 f2fs_init_inode_metadata+0xab/0x340 fs/f2fs/dir.c:540 f2fs_add_inline_entry+0x145/0x390 fs/f2fs/inline.c:621 f2fs_add_dentry+0x31/0x80 fs/f2fs/dir.c:757 f2fs_do_add_link+0xcd/0x130 fs/f2fs/dir.c:798 f2fs_add_link fs/f2fs/f2fs.h:3234 [inline] f2fs_create+0x104/0x290 fs/f2fs/namei.c:344 lookup_open.isra.0+0x2de/0x500 fs/namei.c:3103 open_last_lookups+0xa9/0x340 fs/namei.c:3177 path_openat+0x8f/0x1b0 fs/namei.c:3365 do_filp_open+0x87/0x130 fs/namei.c:3395 do_sys_openat2+0x96/0x150 fs/open.c:1168 [...] That happened because f2fs_add_inline_entry() locks the directory inode's page in order to add the dentry, then f2fs_get_context() tries to lock it recursively in order to read the encryption xattr. This problem is specific to "test_dummy_encryption" because normally the directory's fscrypt_info would be set up prior to f2fs_add_inline_entry() in order to encrypt the new filename. Regardless, the new design fixes this test_dummy_encryption deadlock as well as potential deadlocks with fs reclaim, by setting up any needed fscrypt_info structs prior to taking so many locks. The test_dummy_encryption deadlock was reported by Daniel Rosenberg. Reported-by: Daniel Rosenberg <drosen@google.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-17 12:11:27 +08:00
if (encrypt)
f2fs_set_encrypted_inode(inode);
if (f2fs_sb_has_extra_attr(sbi)) {
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
set_inode_flag(inode, FI_EXTRA_ATTR);
F2FS_I(inode)->i_extra_isize = F2FS_TOTAL_EXTRA_ATTR_SIZE;
}
if (test_opt(sbi, INLINE_XATTR))
set_inode_flag(inode, FI_INLINE_XATTR);
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
if (test_opt(sbi, INLINE_DATA) && f2fs_may_inline_data(inode))
set_inode_flag(inode, FI_INLINE_DATA);
if (f2fs_may_inline_dentry(inode))
set_inode_flag(inode, FI_INLINE_DENTRY);
if (f2fs_sb_has_flexible_inline_xattr(sbi)) {
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs_bug_on(sbi, !f2fs_has_extra_attr(inode));
if (f2fs_has_inline_xattr(inode))
xattr_size = F2FS_OPTION(sbi).inline_xattr_size;
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
/* Otherwise, will be 0 */
} else if (f2fs_has_inline_xattr(inode) ||
f2fs_has_inline_dentry(inode)) {
xattr_size = DEFAULT_INLINE_XATTR_ADDRS;
}
F2FS_I(inode)->i_inline_xattr_size = xattr_size;
f2fs_init_extent_tree(inode, NULL);
stat_inc_inline_xattr(inode);
stat_inc_inline_inode(inode);
stat_inc_inline_dir(inode);
F2FS_I(inode)->i_flags =
f2fs_mask_flags(mode, F2FS_I(dir)->i_flags & F2FS_FL_INHERITED);
if (S_ISDIR(inode->i_mode))
F2FS_I(inode)->i_flags |= F2FS_INDEX_FL;
if (F2FS_I(inode)->i_flags & F2FS_PROJINHERIT_FL)
set_inode_flag(inode, FI_PROJ_INHERIT);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (f2fs_sb_has_compression(sbi)) {
/* Inherit the compression flag in directory */
if ((F2FS_I(dir)->i_flags & F2FS_COMPR_FL) &&
f2fs_may_compress(inode))
set_compress_context(inode);
}
f2fs_set_inode_flags(inode);
trace_f2fs_new_inode(inode, 0);
return inode;
fail:
trace_f2fs_new_inode(inode, err);
make_bad_inode(inode);
if (nid_free)
set_inode_flag(inode, FI_FREE_NID);
iput(inode);
return ERR_PTR(err);
fail_drop:
trace_f2fs_new_inode(inode, err);
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
if (nid_free)
set_inode_flag(inode, FI_FREE_NID);
clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
return ERR_PTR(err);
}
static inline int is_extension_exist(const unsigned char *s, const char *sub)
{
size_t slen = strlen(s);
size_t sublen = strlen(sub);
int i;
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
if (sublen == 1 && *sub == '*')
return 1;
/*
* filename format of multimedia file should be defined as:
* "filename + '.' + extension + (optional: '.' + temp extension)".
*/
if (slen < sublen + 2)
return 0;
for (i = 1; i < slen - sublen; i++) {
if (s[i] != '.')
continue;
if (!strncasecmp(s + i + 1, sub, sublen))
return 1;
}
return 0;
}
/*
* Set file's temperature for hot/cold data separation
*/
static inline void set_file_temperature(struct f2fs_sb_info *sbi, struct inode *inode,
const unsigned char *name)
{
__u8 (*extlist)[F2FS_EXTENSION_LEN] = sbi->raw_super->extension_list;
int i, cold_count, hot_count;
down_read(&sbi->sb_lock);
cold_count = le32_to_cpu(sbi->raw_super->extension_count);
hot_count = sbi->raw_super->hot_ext_count;
for (i = 0; i < cold_count + hot_count; i++) {
if (is_extension_exist(name, extlist[i]))
break;
}
up_read(&sbi->sb_lock);
if (i == cold_count + hot_count)
return;
if (i < cold_count)
file_set_cold(inode);
else
file_set_hot(inode);
}
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
int f2fs_update_extension_list(struct f2fs_sb_info *sbi, const char *name,
bool hot, bool set)
{
__u8 (*extlist)[F2FS_EXTENSION_LEN] = sbi->raw_super->extension_list;
int cold_count = le32_to_cpu(sbi->raw_super->extension_count);
int hot_count = sbi->raw_super->hot_ext_count;
int total_count = cold_count + hot_count;
int start, count;
int i;
if (set) {
if (total_count == F2FS_MAX_EXTENSION)
return -EINVAL;
} else {
if (!hot && !cold_count)
return -EINVAL;
if (hot && !hot_count)
return -EINVAL;
}
if (hot) {
start = cold_count;
count = total_count;
} else {
start = 0;
count = cold_count;
}
for (i = start; i < count; i++) {
if (strcmp(name, extlist[i]))
continue;
if (set)
return -EINVAL;
memcpy(extlist[i], extlist[i + 1],
F2FS_EXTENSION_LEN * (total_count - i - 1));
memset(extlist[total_count - 1], 0, F2FS_EXTENSION_LEN);
if (hot)
sbi->raw_super->hot_ext_count = hot_count - 1;
else
sbi->raw_super->extension_count =
cpu_to_le32(cold_count - 1);
return 0;
}
if (!set)
return -EINVAL;
if (hot) {
memcpy(extlist[count], name, strlen(name));
sbi->raw_super->hot_ext_count = hot_count + 1;
} else {
char buf[F2FS_MAX_EXTENSION][F2FS_EXTENSION_LEN];
memcpy(buf, &extlist[cold_count],
F2FS_EXTENSION_LEN * hot_count);
memset(extlist[cold_count], 0, F2FS_EXTENSION_LEN);
memcpy(extlist[cold_count], name, strlen(name));
memcpy(&extlist[cold_count + 1], buf,
F2FS_EXTENSION_LEN * hot_count);
sbi->raw_super->extension_count = cpu_to_le32(cold_count + 1);
}
return 0;
}
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
static void set_compress_inode(struct f2fs_sb_info *sbi, struct inode *inode,
const unsigned char *name)
{
__u8 (*extlist)[F2FS_EXTENSION_LEN] = sbi->raw_super->extension_list;
unsigned char (*ext)[F2FS_EXTENSION_LEN];
unsigned int ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
int i, cold_count, hot_count;
if (!f2fs_sb_has_compression(sbi) ||
is_inode_flag_set(inode, FI_COMPRESSED_FILE) ||
F2FS_I(inode)->i_flags & F2FS_NOCOMP_FL ||
!f2fs_may_compress(inode))
return;
down_read(&sbi->sb_lock);
cold_count = le32_to_cpu(sbi->raw_super->extension_count);
hot_count = sbi->raw_super->hot_ext_count;
for (i = cold_count; i < cold_count + hot_count; i++) {
if (is_extension_exist(name, extlist[i])) {
up_read(&sbi->sb_lock);
return;
}
}
up_read(&sbi->sb_lock);
ext = F2FS_OPTION(sbi).extensions;
for (i = 0; i < ext_cnt; i++) {
if (!is_extension_exist(name, ext[i]))
continue;
set_compress_context(inode);
return;
}
}
static int f2fs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
bool excl)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct inode *inode;
nid_t ino = 0;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
int err;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
err = dquot_initialize(dir);
if (err)
return err;
inode = f2fs_new_inode(dir, mode);
if (IS_ERR(inode))
return PTR_ERR(inode);
if (!test_opt(sbi, DISABLE_EXT_IDENTIFY))
set_file_temperature(sbi, inode, dentry->d_name.name);
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
set_compress_inode(sbi, inode, dentry->d_name.name);
inode->i_op = &f2fs_file_inode_operations;
inode->i_fop = &f2fs_file_operations;
inode->i_mapping->a_ops = &f2fs_dblock_aops;
ino = inode->i_ino;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
err = f2fs_add_link(dentry, inode);
if (err)
goto out;
f2fs_unlock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_alloc_nid_done(sbi, ino);
d_instantiate_new(dentry, inode);
if (IS_DIRSYNC(dir))
f2fs_sync_fs(sbi->sb, 1);
f2fs_balance_fs(sbi, true);
return 0;
out:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_handle_failed_inode(inode);
return err;
}
static int f2fs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
struct inode *inode = d_inode(old_dentry);
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
int err;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
err = fscrypt_prepare_link(old_dentry, dir, dentry);
if (err)
return err;
if (is_inode_flag_set(dir, FI_PROJ_INHERIT) &&
(!projid_eq(F2FS_I(dir)->i_projid,
F2FS_I(old_dentry->d_inode)->i_projid)))
return -EXDEV;
err = dquot_initialize(dir);
if (err)
return err;
f2fs_balance_fs(sbi, true);
inode->i_ctime = current_time(inode);
ihold(inode);
set_inode_flag(inode, FI_INC_LINK);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
err = f2fs_add_link(dentry, inode);
if (err)
goto out;
f2fs_unlock_op(sbi);
d_instantiate(dentry, inode);
if (IS_DIRSYNC(dir))
f2fs_sync_fs(sbi->sb, 1);
return 0;
out:
clear_inode_flag(inode, FI_INC_LINK);
iput(inode);
f2fs_unlock_op(sbi);
return err;
}
struct dentry *f2fs_get_parent(struct dentry *child)
{
struct qstr dotdot = QSTR_INIT("..", 2);
struct page *page;
unsigned long ino = f2fs_inode_by_name(d_inode(child), &dotdot, &page);
if (!ino) {
if (IS_ERR(page))
return ERR_CAST(page);
return ERR_PTR(-ENOENT);
}
return d_obtain_alias(f2fs_iget(child->d_sb, ino));
}
static int __recover_dot_dentries(struct inode *dir, nid_t pino)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct qstr dot = QSTR_INIT(".", 1);
struct qstr dotdot = QSTR_INIT("..", 2);
struct f2fs_dir_entry *de;
struct page *page;
int err = 0;
if (f2fs_readonly(sbi->sb)) {
f2fs_info(sbi, "skip recovering inline_dots inode (ino:%lu, pino:%u) in readonly mountpoint",
dir->i_ino, pino);
return 0;
}
err = dquot_initialize(dir);
if (err)
return err;
f2fs_balance_fs(sbi, true);
f2fs_lock_op(sbi);
de = f2fs_find_entry(dir, &dot, &page);
if (de) {
f2fs_put_page(page, 0);
} else if (IS_ERR(page)) {
err = PTR_ERR(page);
goto out;
} else {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_do_add_link(dir, &dot, NULL, dir->i_ino, S_IFDIR);
if (err)
goto out;
}
de = f2fs_find_entry(dir, &dotdot, &page);
if (de)
f2fs_put_page(page, 0);
else if (IS_ERR(page))
err = PTR_ERR(page);
else
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_do_add_link(dir, &dotdot, NULL, pino, S_IFDIR);
out:
if (!err)
clear_inode_flag(dir, FI_INLINE_DOTS);
f2fs_unlock_op(sbi);
return err;
}
static struct dentry *f2fs_lookup(struct inode *dir, struct dentry *dentry,
unsigned int flags)
{
struct inode *inode = NULL;
struct f2fs_dir_entry *de;
struct page *page;
struct dentry *new;
nid_t ino = -1;
int err = 0;
unsigned int root_ino = F2FS_ROOT_INO(F2FS_I_SB(dir));
2020-05-07 15:59:04 +08:00
struct f2fs_filename fname;
trace_f2fs_lookup_start(dir, dentry, flags);
if (dentry->d_name.len > F2FS_NAME_LEN) {
err = -ENAMETOOLONG;
goto out;
}
2020-05-07 15:59:04 +08:00
err = f2fs_prepare_lookup(dir, dentry, &fname);
generic_set_encrypted_ci_d_ops(dentry);
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
if (err == -ENOENT)
goto out_splice;
if (err)
goto out;
de = __f2fs_find_entry(dir, &fname, &page);
2020-05-07 15:59:04 +08:00
f2fs_free_filename(&fname);
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
if (!de) {
if (IS_ERR(page)) {
err = PTR_ERR(page);
goto out;
}
err = -ENOENT;
goto out_splice;
}
ino = le32_to_cpu(de->ino);
f2fs_put_page(page, 0);
inode = f2fs_iget(dir->i_sb, ino);
if (IS_ERR(inode)) {
err = PTR_ERR(inode);
goto out;
}
if ((dir->i_ino == root_ino) && f2fs_has_inline_dots(dir)) {
err = __recover_dot_dentries(dir, root_ino);
if (err)
goto out_iput;
}
if (f2fs_has_inline_dots(inode)) {
err = __recover_dot_dentries(inode, dir->i_ino);
if (err)
goto out_iput;
}
if (IS_ENCRYPTED(dir) &&
(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) &&
!fscrypt_has_permitted_context(dir, inode)) {
f2fs_warn(F2FS_I_SB(inode), "Inconsistent encryption contexts: %lu/%lu",
dir->i_ino, inode->i_ino);
err = -EPERM;
goto out_iput;
}
out_splice:
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
#ifdef CONFIG_UNICODE
if (!inode && IS_CASEFOLDED(dir)) {
/* Eventually we want to call d_add_ci(dentry, NULL)
* for negative dentries in the encoding case as
* well. For now, prevent the negative dentry
* from being cached.
*/
trace_f2fs_lookup_end(dir, dentry, ino, err);
return NULL;
}
#endif
new = d_splice_alias(inode, dentry);
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
err = PTR_ERR_OR_ZERO(new);
trace_f2fs_lookup_end(dir, dentry, ino, !new ? -ENOENT : err);
return new;
out_iput:
iput(inode);
out:
trace_f2fs_lookup_end(dir, dentry, ino, err);
return ERR_PTR(err);
}
static int f2fs_unlink(struct inode *dir, struct dentry *dentry)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct inode *inode = d_inode(dentry);
struct f2fs_dir_entry *de;
struct page *page;
int err;
trace_f2fs_unlink_enter(dir, dentry);
if (unlikely(f2fs_cp_error(sbi))) {
err = -EIO;
goto fail;
}
err = dquot_initialize(dir);
if (err)
goto fail;
err = dquot_initialize(inode);
if (err)
goto fail;
de = f2fs_find_entry(dir, &dentry->d_name, &page);
if (!de) {
if (IS_ERR(page))
err = PTR_ERR(page);
goto fail;
}
f2fs_balance_fs(sbi, true);
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_acquire_orphan_inode(sbi);
if (err) {
f2fs_unlock_op(sbi);
f2fs_put_page(page, 0);
goto fail;
}
f2fs_delete_entry(de, page, dir, inode);
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
#ifdef CONFIG_UNICODE
/* VFS negative dentries are incompatible with Encoding and
* Case-insensitiveness. Eventually we'll want avoid
* invalidating the dentries here, alongside with returning the
* negative dentries at f2fs_lookup(), when it is better
f2fs: Support case-insensitive file name lookups Modeled after commit b886ee3e778e ("ext4: Support case-insensitive file name lookups") """ This patch implements the actual support for case-insensitive file name lookups in f2fs, based on the feature bit and the encoding stored in the superblock. A filesystem that has the casefold feature set is able to configure directories with the +F (F2FS_CASEFOLD_FL) attribute, enabling lookups to succeed in that directory in a case-insensitive fashion, i.e: match a directory entry even if the name used by userspace is not a byte per byte match with the disk name, but is an equivalent case-insensitive version of the Unicode string. This operation is called a case-insensitive file name lookup. The feature is configured as an inode attribute applied to directories and inherited by its children. This attribute can only be enabled on empty directories for filesystems that support the encoding feature, thus preventing collision of file names that only differ by case. * dcache handling: For a +F directory, F2Fs only stores the first equivalent name dentry used in the dcache. This is done to prevent unintentional duplication of dentries in the dcache, while also allowing the VFS code to quickly find the right entry in the cache despite which equivalent string was used in a previous lookup, without having to resort to ->lookup(). d_hash() of casefolded directories is implemented as the hash of the casefolded string, such that we always have a well-known bucket for all the equivalencies of the same string. d_compare() uses the utf8_strncasecmp() infrastructure, which handles the comparison of equivalent, same case, names as well. For now, negative lookups are not inserted in the dcache, since they would need to be invalidated anyway, because we can't trust missing file dentries. This is bad for performance but requires some leveraging of the vfs layer to fix. We can live without that for now, and so does everyone else. * on-disk data: Despite using a specific version of the name as the internal representation within the dcache, the name stored and fetched from the disk is a byte-per-byte match with what the user requested, making this implementation 'name-preserving'. i.e. no actual information is lost when writing to storage. DX is supported by modifying the hashes used in +F directories to make them case/encoding-aware. The new disk hashes are calculated as the hash of the full casefolded string, instead of the string directly. This allows us to efficiently search for file names in the htree without requiring the user to provide an exact name. * Dealing with invalid sequences: By default, when a invalid UTF-8 sequence is identified, ext4 will treat it as an opaque byte sequence, ignoring the encoding and reverting to the old behavior for that unique file. This means that case-insensitive file name lookup will not work only for that file. An optional bit can be set in the superblock telling the filesystem code and userspace tools to enforce the encoding. When that optional bit is set, any attempt to create a file name using an invalid UTF-8 sequence will fail and return an error to userspace. * Normalization algorithm: The UTF-8 algorithms used to compare strings in f2fs is implemented in fs/unicode, and is based on a previous version developed by SGI. It implements the Canonical decomposition (NFD) algorithm described by the Unicode specification 12.1, or higher, combined with the elimination of ignorable code points (NFDi) and full case-folding (CF) as documented in fs/unicode/utf8_norm.c. NFD seems to be the best normalization method for F2FS because: - It has a lower cost than NFC/NFKC (which requires decomposing to NFD as an intermediary step) - It doesn't eliminate important semantic meaning like compatibility decompositions. Although: - This implementation is not completely linguistic accurate, because different languages have conflicting rules, which would require the specialization of the filesystem to a given locale, which brings all sorts of problems for removable media and for users who use more than one language. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-24 07:05:29 +08:00
* supported by the VFS for the CI case.
*/
if (IS_CASEFOLDED(dir))
d_invalidate(dentry);
#endif
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_unlock_op(sbi);
if (IS_DIRSYNC(dir))
f2fs_sync_fs(sbi->sb, 1);
fail:
trace_f2fs_unlink_exit(inode, err);
return err;
}
static const char *f2fs_get_link(struct dentry *dentry,
struct inode *inode,
struct delayed_call *done)
{
const char *link = page_get_link(dentry, inode, done);
if (!IS_ERR(link) && !*link) {
/* this is broken symlink case */
do_delayed_call(done);
clear_delayed_call(done);
link = ERR_PTR(-ENOENT);
}
return link;
}
static int f2fs_symlink(struct inode *dir, struct dentry *dentry,
const char *symname)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct inode *inode;
size_t len = strlen(symname);
struct fscrypt_str disk_link;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
int err;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
err = fscrypt_prepare_symlink(dir, symname, len, dir->i_sb->s_blocksize,
&disk_link);
if (err)
return err;
err = dquot_initialize(dir);
if (err)
return err;
inode = f2fs_new_inode(dir, S_IFLNK | S_IRWXUGO);
if (IS_ERR(inode))
return PTR_ERR(inode);
if (IS_ENCRYPTED(inode))
inode->i_op = &f2fs_encrypted_symlink_inode_operations;
else
inode->i_op = &f2fs_symlink_inode_operations;
inode_nohighmem(inode);
inode->i_mapping->a_ops = &f2fs_dblock_aops;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
err = f2fs_add_link(dentry, inode);
if (err)
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
goto out_f2fs_handle_failed_inode;
f2fs_unlock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_alloc_nid_done(sbi, inode->i_ino);
err = fscrypt_encrypt_symlink(inode, symname, len, &disk_link);
if (err)
goto err_out;
err = page_symlink(inode, disk_link.name, disk_link.len);
err_out:
d_instantiate_new(dentry, inode);
/*
* Let's flush symlink data in order to avoid broken symlink as much as
* possible. Nevertheless, fsyncing is the best way, but there is no
* way to get a file descriptor in order to flush that.
*
* Note that, it needs to do dir->fsync to make this recoverable.
* If the symlink path is stored into inline_data, there is no
* performance regression.
*/
if (!err) {
filemap_write_and_wait_range(inode->i_mapping, 0,
disk_link.len - 1);
if (IS_DIRSYNC(dir))
f2fs_sync_fs(sbi->sb, 1);
} else {
f2fs_unlink(dir, dentry);
}
f2fs_balance_fs(sbi, true);
goto out_free_encrypted_link;
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
out_f2fs_handle_failed_inode:
f2fs_handle_failed_inode(inode);
out_free_encrypted_link:
if (disk_link.name != (unsigned char *)symname)
kfree(disk_link.name);
return err;
}
static int f2fs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct inode *inode;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
int err;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
err = dquot_initialize(dir);
if (err)
return err;
inode = f2fs_new_inode(dir, S_IFDIR | mode);
if (IS_ERR(inode))
return PTR_ERR(inode);
inode->i_op = &f2fs_dir_inode_operations;
inode->i_fop = &f2fs_dir_operations;
inode->i_mapping->a_ops = &f2fs_dblock_aops;
inode_nohighmem(inode);
set_inode_flag(inode, FI_INC_LINK);
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
err = f2fs_add_link(dentry, inode);
if (err)
goto out_fail;
f2fs_unlock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_alloc_nid_done(sbi, inode->i_ino);
d_instantiate_new(dentry, inode);
if (IS_DIRSYNC(dir))
f2fs_sync_fs(sbi->sb, 1);
f2fs_balance_fs(sbi, true);
return 0;
out_fail:
clear_inode_flag(inode, FI_INC_LINK);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_handle_failed_inode(inode);
return err;
}
static int f2fs_rmdir(struct inode *dir, struct dentry *dentry)
{
struct inode *inode = d_inode(dentry);
if (f2fs_empty_dir(inode))
return f2fs_unlink(dir, dentry);
return -ENOTEMPTY;
}
static int f2fs_mknod(struct inode *dir, struct dentry *dentry,
umode_t mode, dev_t rdev)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct inode *inode;
int err = 0;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
err = dquot_initialize(dir);
if (err)
return err;
inode = f2fs_new_inode(dir, mode);
if (IS_ERR(inode))
return PTR_ERR(inode);
init_special_inode(inode, inode->i_mode, rdev);
inode->i_op = &f2fs_special_inode_operations;
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_lock_op(sbi);
err = f2fs_add_link(dentry, inode);
if (err)
goto out;
f2fs_unlock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_alloc_nid_done(sbi, inode->i_ino);
d_instantiate_new(dentry, inode);
if (IS_DIRSYNC(dir))
f2fs_sync_fs(sbi->sb, 1);
f2fs_balance_fs(sbi, true);
return 0;
out:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_handle_failed_inode(inode);
return err;
}
static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
umode_t mode, struct inode **whiteout)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
struct inode *inode;
int err;
err = dquot_initialize(dir);
if (err)
return err;
inode = f2fs_new_inode(dir, mode);
if (IS_ERR(inode))
return PTR_ERR(inode);
if (whiteout) {
init_special_inode(inode, inode->i_mode, WHITEOUT_DEV);
inode->i_op = &f2fs_special_inode_operations;
} else {
inode->i_op = &f2fs_file_inode_operations;
inode->i_fop = &f2fs_file_operations;
inode->i_mapping->a_ops = &f2fs_dblock_aops;
}
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_acquire_orphan_inode(sbi);
if (err)
goto out;
err = f2fs_do_tmpfile(inode, dir);
if (err)
goto release_out;
/*
* add this non-linked tmpfile to orphan list, in this way we could
* remove all unused data of tmpfile after abnormal power-off.
*/
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_add_orphan_inode(inode);
f2fs_alloc_nid_done(sbi, inode->i_ino);
if (whiteout) {
f2fs_i_links_write(inode, false);
inode->i_state |= I_LINKABLE;
*whiteout = inode;
} else {
d_tmpfile(dentry, inode);
}
/* link_count was changed by d_tmpfile as well. */
f2fs_unlock_op(sbi);
unlock_new_inode(inode);
f2fs_balance_fs(sbi, true);
return 0;
release_out:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_release_orphan_inode(sbi);
out:
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_handle_failed_inode(inode);
return err;
}
static int f2fs_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dir);
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
return __f2fs_tmpfile(dir, dentry, mode, NULL);
}
static int f2fs_create_whiteout(struct inode *dir, struct inode **whiteout)
{
if (unlikely(f2fs_cp_error(F2FS_I_SB(dir))))
return -EIO;
return __f2fs_tmpfile(dir, NULL, S_IFCHR | WHITEOUT_MODE, whiteout);
}
static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry,
unsigned int flags)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(old_dir);
struct inode *old_inode = d_inode(old_dentry);
struct inode *new_inode = d_inode(new_dentry);
struct inode *whiteout = NULL;
struct page *old_dir_page = NULL;
struct page *old_page, *new_page = NULL;
struct f2fs_dir_entry *old_dir_entry = NULL;
struct f2fs_dir_entry *old_entry;
struct f2fs_dir_entry *new_entry;
int err;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
if (is_inode_flag_set(new_dir, FI_PROJ_INHERIT) &&
(!projid_eq(F2FS_I(new_dir)->i_projid,
F2FS_I(old_dentry->d_inode)->i_projid)))
return -EXDEV;
/*
* If new_inode is null, the below renaming flow will
* add a link in old_dir which can conver inline_dir.
* After then, if we failed to get the entry due to other
* reasons like ENOMEM, we had to remove the new entry.
* Instead of adding such the error handling routine, let's
* simply convert first here.
*/
if (old_dir == new_dir && !new_inode) {
err = f2fs_try_convert_inline_dir(old_dir, new_dentry);
if (err)
return err;
}
if (flags & RENAME_WHITEOUT) {
err = f2fs_create_whiteout(old_dir, &whiteout);
if (err)
return err;
}
err = dquot_initialize(old_dir);
if (err)
goto out;
err = dquot_initialize(new_dir);
if (err)
goto out;
if (new_inode) {
err = dquot_initialize(new_inode);
if (err)
goto out;
}
err = -ENOENT;
old_entry = f2fs_find_entry(old_dir, &old_dentry->d_name, &old_page);
if (!old_entry) {
if (IS_ERR(old_page))
err = PTR_ERR(old_page);
goto out;
}
if (S_ISDIR(old_inode->i_mode)) {
old_dir_entry = f2fs_parent_dir(old_inode, &old_dir_page);
if (!old_dir_entry) {
if (IS_ERR(old_dir_page))
err = PTR_ERR(old_dir_page);
goto out_old;
}
}
if (new_inode) {
err = -ENOTEMPTY;
if (old_dir_entry && !f2fs_empty_dir(new_inode))
goto out_dir;
err = -ENOENT;
new_entry = f2fs_find_entry(new_dir, &new_dentry->d_name,
&new_page);
if (!new_entry) {
if (IS_ERR(new_page))
err = PTR_ERR(new_page);
goto out_dir;
}
f2fs_balance_fs(sbi, true);
f2fs_lock_op(sbi);
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
err = f2fs_acquire_orphan_inode(sbi);
if (err)
goto put_out_dir;
f2fs_set_link(new_dir, new_entry, new_page, old_inode);
new_page = NULL;
new_inode->i_ctime = current_time(new_inode);
down_write(&F2FS_I(new_inode)->i_sem);
if (old_dir_entry)
f2fs_i_links_write(new_inode, false);
f2fs_i_links_write(new_inode, false);
up_write(&F2FS_I(new_inode)->i_sem);
if (!new_inode->i_nlink)
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_add_orphan_inode(new_inode);
else
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_release_orphan_inode(sbi);
} else {
f2fs_balance_fs(sbi, true);
f2fs_lock_op(sbi);
err = f2fs_add_link(new_dentry, old_inode);
if (err) {
f2fs_unlock_op(sbi);
goto out_dir;
}
if (old_dir_entry)
f2fs_i_links_write(new_dir, true);
}
down_write(&F2FS_I(old_inode)->i_sem);
if (!old_dir_entry || whiteout)
file_lost_pino(old_inode);
else
/* adjust dir's i_pino to pass fsck check */
f2fs_i_pino_write(old_inode, new_dir->i_ino);
up_write(&F2FS_I(old_inode)->i_sem);
old_inode->i_ctime = current_time(old_inode);
f2fs_mark_inode_dirty_sync(old_inode, false);
f2fs_delete_entry(old_entry, old_page, old_dir, NULL);
old_page = NULL;
if (whiteout) {
set_inode_flag(whiteout, FI_INC_LINK);
err = f2fs_add_link(old_dentry, whiteout);
if (err)
goto put_out_dir;
whiteout->i_state &= ~I_LINKABLE;
iput(whiteout);
}
if (old_dir_entry) {
if (old_dir != new_dir && !whiteout)
f2fs_set_link(old_inode, old_dir_entry,
old_dir_page, new_dir);
else
f2fs_put_page(old_dir_page, 0);
f2fs_i_links_write(old_dir, false);
}
if (F2FS_OPTION(sbi).fsync_mode == FSYNC_MODE_STRICT) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_add_ino_entry(sbi, new_dir->i_ino, TRANS_DIR_INO);
if (S_ISDIR(old_inode->i_mode))
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_add_ino_entry(sbi, old_inode->i_ino,
TRANS_DIR_INO);
}
f2fs: use rw_sem instead of fs_lock(locks mutex) The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-09-27 18:08:30 +08:00
f2fs_unlock_op(sbi);
if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir))
f2fs_sync_fs(sbi->sb, 1);
f2fs_update_time(sbi, REQ_TIME);
return 0;
put_out_dir:
f2fs_unlock_op(sbi);
f2fs_put_page(new_page, 0);
out_dir:
if (old_dir_entry)
f2fs_put_page(old_dir_page, 0);
out_old:
f2fs_put_page(old_page, 0);
out:
if (whiteout)
iput(whiteout);
return err;
}
static int f2fs_cross_rename(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(old_dir);
struct inode *old_inode = d_inode(old_dentry);
struct inode *new_inode = d_inode(new_dentry);
struct page *old_dir_page, *new_dir_page;
struct page *old_page, *new_page;
struct f2fs_dir_entry *old_dir_entry = NULL, *new_dir_entry = NULL;
struct f2fs_dir_entry *old_entry, *new_entry;
int old_nlink = 0, new_nlink = 0;
int err;
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
if (!f2fs_is_checkpoint_ready(sbi))
return -ENOSPC;
if ((is_inode_flag_set(new_dir, FI_PROJ_INHERIT) &&
!projid_eq(F2FS_I(new_dir)->i_projid,
F2FS_I(old_dentry->d_inode)->i_projid)) ||
(is_inode_flag_set(new_dir, FI_PROJ_INHERIT) &&
!projid_eq(F2FS_I(old_dir)->i_projid,
F2FS_I(new_dentry->d_inode)->i_projid)))
return -EXDEV;
err = dquot_initialize(old_dir);
if (err)
goto out;
err = dquot_initialize(new_dir);
if (err)
goto out;
err = -ENOENT;
old_entry = f2fs_find_entry(old_dir, &old_dentry->d_name, &old_page);
if (!old_entry) {
if (IS_ERR(old_page))
err = PTR_ERR(old_page);
goto out;
}
new_entry = f2fs_find_entry(new_dir, &new_dentry->d_name, &new_page);
if (!new_entry) {
if (IS_ERR(new_page))
err = PTR_ERR(new_page);
goto out_old;
}
/* prepare for updating ".." directory entry info later */
if (old_dir != new_dir) {
if (S_ISDIR(old_inode->i_mode)) {
old_dir_entry = f2fs_parent_dir(old_inode,
&old_dir_page);
if (!old_dir_entry) {
if (IS_ERR(old_dir_page))
err = PTR_ERR(old_dir_page);
goto out_new;
}
}
if (S_ISDIR(new_inode->i_mode)) {
new_dir_entry = f2fs_parent_dir(new_inode,
&new_dir_page);
if (!new_dir_entry) {
if (IS_ERR(new_dir_page))
err = PTR_ERR(new_dir_page);
goto out_old_dir;
}
}
}
/*
* If cross rename between file and directory those are not
* in the same directory, we will inc nlink of file's parent
* later, so we should check upper boundary of its nlink.
*/
if ((!old_dir_entry || !new_dir_entry) &&
old_dir_entry != new_dir_entry) {
old_nlink = old_dir_entry ? -1 : 1;
new_nlink = -old_nlink;
err = -EMLINK;
if ((old_nlink > 0 && old_dir->i_nlink >= F2FS_LINK_MAX) ||
(new_nlink > 0 && new_dir->i_nlink >= F2FS_LINK_MAX))
goto out_new_dir;
}
f2fs_balance_fs(sbi, true);
f2fs_lock_op(sbi);
/* update ".." directory entry info of old dentry */
if (old_dir_entry)
f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir);
/* update ".." directory entry info of new dentry */
if (new_dir_entry)
f2fs_set_link(new_inode, new_dir_entry, new_dir_page, old_dir);
/* update directory entry info of old dir inode */
f2fs_set_link(old_dir, old_entry, old_page, new_inode);
down_write(&F2FS_I(old_inode)->i_sem);
if (!old_dir_entry)
file_lost_pino(old_inode);
else
/* adjust dir's i_pino to pass fsck check */
f2fs_i_pino_write(old_inode, new_dir->i_ino);
up_write(&F2FS_I(old_inode)->i_sem);
old_dir->i_ctime = current_time(old_dir);
if (old_nlink) {
down_write(&F2FS_I(old_dir)->i_sem);
f2fs_i_links_write(old_dir, old_nlink > 0);
up_write(&F2FS_I(old_dir)->i_sem);
}
f2fs_mark_inode_dirty_sync(old_dir, false);
/* update directory entry info of new dir inode */
f2fs_set_link(new_dir, new_entry, new_page, old_inode);
down_write(&F2FS_I(new_inode)->i_sem);
if (!new_dir_entry)
file_lost_pino(new_inode);
else
/* adjust dir's i_pino to pass fsck check */
f2fs_i_pino_write(new_inode, old_dir->i_ino);
up_write(&F2FS_I(new_inode)->i_sem);
new_dir->i_ctime = current_time(new_dir);
if (new_nlink) {
down_write(&F2FS_I(new_dir)->i_sem);
f2fs_i_links_write(new_dir, new_nlink > 0);
up_write(&F2FS_I(new_dir)->i_sem);
}
f2fs_mark_inode_dirty_sync(new_dir, false);
if (F2FS_OPTION(sbi).fsync_mode == FSYNC_MODE_STRICT) {
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs_add_ino_entry(sbi, old_dir->i_ino, TRANS_DIR_INO);
f2fs_add_ino_entry(sbi, new_dir->i_ino, TRANS_DIR_INO);
}
f2fs_unlock_op(sbi);
if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir))
f2fs_sync_fs(sbi->sb, 1);
f2fs_update_time(sbi, REQ_TIME);
return 0;
out_new_dir:
if (new_dir_entry) {
f2fs_put_page(new_dir_page, 0);
}
out_old_dir:
if (old_dir_entry) {
f2fs_put_page(old_dir_page, 0);
}
out_new:
f2fs_put_page(new_page, 0);
out_old:
f2fs_put_page(old_page, 0);
out:
return err;
}
static int f2fs_rename2(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry,
unsigned int flags)
{
int err;
if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE | RENAME_WHITEOUT))
return -EINVAL;
err = fscrypt_prepare_rename(old_dir, old_dentry, new_dir, new_dentry,
flags);
if (err)
return err;
if (flags & RENAME_EXCHANGE) {
return f2fs_cross_rename(old_dir, old_dentry,
new_dir, new_dentry);
}
/*
* VFS has already handled the new dentry existence case,
* here, we just deal with "RENAME_NOREPLACE" as regular rename.
*/
return f2fs_rename(old_dir, old_dentry, new_dir, new_dentry, flags);
}
static const char *f2fs_encrypted_get_link(struct dentry *dentry,
struct inode *inode,
struct delayed_call *done)
{
struct page *page;
const char *target;
if (!dentry)
return ERR_PTR(-ECHILD);
page = read_mapping_page(inode->i_mapping, 0, NULL);
if (IS_ERR(page))
return ERR_CAST(page);
target = fscrypt_get_symlink(inode, page_address(page),
inode->i_sb->s_blocksize, done);
put_page(page);
return target;
}
const struct inode_operations f2fs_encrypted_symlink_inode_operations = {
.get_link = f2fs_encrypted_get_link,
.getattr = f2fs_getattr,
.setattr = f2fs_setattr,
.listxattr = f2fs_listxattr,
};
const struct inode_operations f2fs_dir_inode_operations = {
.create = f2fs_create,
.lookup = f2fs_lookup,
.link = f2fs_link,
.unlink = f2fs_unlink,
.symlink = f2fs_symlink,
.mkdir = f2fs_mkdir,
.rmdir = f2fs_rmdir,
.mknod = f2fs_mknod,
.rename = f2fs_rename2,
.tmpfile = f2fs_tmpfile,
.getattr = f2fs_getattr,
.setattr = f2fs_setattr,
.get_acl = f2fs_get_acl,
.set_acl = f2fs_set_acl,
.listxattr = f2fs_listxattr,
.fiemap = f2fs_fiemap,
};
const struct inode_operations f2fs_symlink_inode_operations = {
.get_link = f2fs_get_link,
.getattr = f2fs_getattr,
.setattr = f2fs_setattr,
.listxattr = f2fs_listxattr,
};
const struct inode_operations f2fs_special_inode_operations = {
.getattr = f2fs_getattr,
.setattr = f2fs_setattr,
.get_acl = f2fs_get_acl,
.set_acl = f2fs_set_acl,
.listxattr = f2fs_listxattr,
};