linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c

1863 lines
50 KiB
C
Raw Normal View History

/*
* Copyright © 2008,2010 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Chris Wilson <chris@chris-wilson.co.uk>
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/dma_remapping.h>
#include <linux/uaccess.h>
#define __EXEC_OBJECT_HAS_PIN (1<<31)
#define __EXEC_OBJECT_HAS_FENCE (1<<30)
#define __EXEC_OBJECT_NEEDS_MAP (1<<29)
#define __EXEC_OBJECT_NEEDS_BIAS (1<<28)
#define __EXEC_OBJECT_INTERNAL_FLAGS (0xf<<28) /* all of the above */
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
#define BATCH_OFFSET_BIAS (256*1024)
struct i915_execbuffer_params {
struct drm_device *dev;
struct drm_file *file;
struct i915_vma *batch;
u32 dispatch_flags;
u32 args_batch_start_offset;
struct intel_engine_cs *engine;
struct i915_gem_context *ctx;
struct drm_i915_gem_request *request;
};
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas {
struct list_head vmas;
int and;
union {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *lut[0];
struct hlist_head buckets[0];
};
};
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
static struct eb_vmas *
eb_create(struct drm_i915_gem_execbuffer2 *args)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb = NULL;
if (args->flags & I915_EXEC_HANDLE_LUT) {
unsigned size = args->buffer_count;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
size *= sizeof(struct i915_vma *);
size += sizeof(struct eb_vmas);
eb = kmalloc(size, GFP_TEMPORARY | __GFP_NOWARN | __GFP_NORETRY);
}
if (eb == NULL) {
unsigned size = args->buffer_count;
unsigned count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head));
while (count > 2*size)
count >>= 1;
eb = kzalloc(count*sizeof(struct hlist_head) +
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
sizeof(struct eb_vmas),
GFP_TEMPORARY);
if (eb == NULL)
return eb;
eb->and = count - 1;
} else
eb->and = -args->buffer_count;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
INIT_LIST_HEAD(&eb->vmas);
return eb;
}
static void
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb_reset(struct eb_vmas *eb)
{
if (eb->and >= 0)
memset(eb->buckets, 0, (eb->and+1)*sizeof(struct hlist_head));
}
static struct i915_vma *
eb_get_batch(struct eb_vmas *eb)
{
struct i915_vma *vma = list_entry(eb->vmas.prev, typeof(*vma), exec_list);
/*
* SNA is doing fancy tricks with compressing batch buffers, which leads
* to negative relocation deltas. Usually that works out ok since the
* relocate address is still positive, except when the batch is placed
* very low in the GTT. Ensure this doesn't happen.
*
* Note that actual hangs have only been observed on gen7, but for
* paranoia do it everywhere.
*/
if ((vma->exec_entry->flags & EXEC_OBJECT_PINNED) == 0)
vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS;
return vma;
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb_lookup_vmas(struct eb_vmas *eb,
struct drm_i915_gem_exec_object2 *exec,
const struct drm_i915_gem_execbuffer2 *args,
struct i915_address_space *vm,
struct drm_file *file)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_object *obj;
struct list_head objects;
int i, ret;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
INIT_LIST_HEAD(&objects);
spin_lock(&file->table_lock);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
/* Grab a reference to the object and release the lock so we can lookup
* or create the VMA without using GFP_ATOMIC */
for (i = 0; i < args->buffer_count; i++) {
obj = to_intel_bo(idr_find(&file->object_idr, exec[i].handle));
if (obj == NULL) {
spin_unlock(&file->table_lock);
DRM_DEBUG("Invalid object handle %d at index %d\n",
exec[i].handle, i);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = -ENOENT;
goto err;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (!list_empty(&obj->obj_exec_link)) {
spin_unlock(&file->table_lock);
DRM_DEBUG("Object %p [handle %d, index %d] appears more than once in object list\n",
obj, exec[i].handle, i);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = -EINVAL;
goto err;
}
i915_gem_object_get(obj);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_add_tail(&obj->obj_exec_link, &objects);
}
spin_unlock(&file->table_lock);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i = 0;
while (!list_empty(&objects)) {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:10:56 +08:00
obj = list_first_entry(&objects,
struct drm_i915_gem_object,
obj_exec_link);
/*
* NOTE: We can leak any vmas created here when something fails
* later on. But that's no issue since vma_unbind can deal with
* vmas which are not actually bound. And since only
* lookup_or_create exists as an interface to get at the vma
* from the (obj, vm) we don't run the risk of creating
* duplicated vmas for the same vm.
*/
vma = i915_gem_obj_lookup_or_create_vma(obj, vm);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (IS_ERR(vma)) {
DRM_DEBUG("Failed to lookup VMA\n");
ret = PTR_ERR(vma);
goto err;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
}
/* Transfer ownership from the objects list to the vmas list. */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_add_tail(&vma->exec_list, &eb->vmas);
list_del_init(&obj->obj_exec_link);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma->exec_entry = &exec[i];
if (eb->and < 0) {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb->lut[i] = vma;
} else {
uint32_t handle = args->flags & I915_EXEC_HANDLE_LUT ? i : exec[i].handle;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma->exec_handle = handle;
hlist_add_head(&vma->exec_node,
&eb->buckets[handle & eb->and]);
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
++i;
}
return 0;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
err:
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(&objects)) {
obj = list_first_entry(&objects,
struct drm_i915_gem_object,
obj_exec_link);
list_del_init(&obj->obj_exec_link);
i915_gem_object_put(obj);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
}
/*
* Objects already transfered to the vmas list will be unreferenced by
* eb_destroy.
*/
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
return ret;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
static struct i915_vma *eb_get_vma(struct eb_vmas *eb, unsigned long handle)
{
if (eb->and < 0) {
if (handle >= -eb->and)
return NULL;
return eb->lut[handle];
} else {
struct hlist_head *head;
struct i915_vma *vma;
head = &eb->buckets[handle & eb->and];
hlist_for_each_entry(vma, head, exec_node) {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (vma->exec_handle == handle)
return vma;
}
return NULL;
}
}
static void
i915_gem_execbuffer_unreserve_vma(struct i915_vma *vma)
{
struct drm_i915_gem_exec_object2 *entry;
struct drm_i915_gem_object *obj = vma->obj;
if (!drm_mm_node_allocated(&vma->node))
return;
entry = vma->exec_entry;
if (entry->flags & __EXEC_OBJECT_HAS_FENCE)
i915_gem_object_unpin_fence(obj);
if (entry->flags & __EXEC_OBJECT_HAS_PIN)
__i915_vma_unpin(vma);
entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN);
}
static void eb_destroy(struct eb_vmas *eb)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(&eb->vmas)) {
struct i915_vma *vma;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma = list_first_entry(&eb->vmas,
struct i915_vma,
exec_list);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_del_init(&vma->exec_list);
i915_gem_execbuffer_unreserve_vma(vma);
i915_gem_object_put(vma->obj);
}
kfree(eb);
}
static inline int use_cpu_reloc(struct drm_i915_gem_object *obj)
{
return (HAS_LLC(obj->base.dev) ||
obj->base.write_domain == I915_GEM_DOMAIN_CPU ||
obj->cache_level != I915_CACHE_NONE);
}
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
/* Used to convert any address to canonical form.
* Starting from gen8, some commands (e.g. STATE_BASE_ADDRESS,
* MI_LOAD_REGISTER_MEM and others, see Broadwell PRM Vol2a) require the
* addresses to be in a canonical form:
* "GraphicsAddress[63:48] are ignored by the HW and assumed to be in correct
* canonical form [63:48] == [47]."
*/
#define GEN8_HIGH_ADDRESS_BIT 47
static inline uint64_t gen8_canonical_addr(uint64_t address)
{
return sign_extend64(address, GEN8_HIGH_ADDRESS_BIT);
}
static inline uint64_t gen8_noncanonical_addr(uint64_t address)
{
return address & ((1ULL << (GEN8_HIGH_ADDRESS_BIT + 1)) - 1);
}
static inline uint64_t
relocation_target(struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
return gen8_canonical_addr((int)reloc->delta + target_offset);
}
static int
relocate_entry_cpu(struct drm_i915_gem_object *obj,
struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
struct drm_device *dev = obj->base.dev;
uint32_t page_offset = offset_in_page(reloc->offset);
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
uint64_t delta = relocation_target(reloc, target_offset);
char *vaddr;
int ret;
ret = i915_gem_object_set_to_cpu_domain(obj, true);
if (ret)
return ret;
drm/i915: mark GEM object pages dirty when mapped & written by the CPU In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11 02:51:23 +08:00
vaddr = kmap_atomic(i915_gem_object_get_dirty_page(obj,
reloc->offset >> PAGE_SHIFT));
*(uint32_t *)(vaddr + page_offset) = lower_32_bits(delta);
if (INTEL_INFO(dev)->gen >= 8) {
page_offset = offset_in_page(page_offset + sizeof(uint32_t));
if (page_offset == 0) {
kunmap_atomic(vaddr);
drm/i915: mark GEM object pages dirty when mapped & written by the CPU In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11 02:51:23 +08:00
vaddr = kmap_atomic(i915_gem_object_get_dirty_page(obj,
(reloc->offset + sizeof(uint32_t)) >> PAGE_SHIFT));
}
*(uint32_t *)(vaddr + page_offset) = upper_32_bits(delta);
}
kunmap_atomic(vaddr);
return 0;
}
static int
relocate_entry_gtt(struct drm_i915_gem_object *obj,
struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
uint64_t delta = relocation_target(reloc, target_offset);
uint64_t offset;
void __iomem *reloc_page;
int ret;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
return ret;
ret = i915_gem_object_put_fence(obj);
if (ret)
return ret;
/* Map the page containing the relocation we're going to perform. */
offset = i915_gem_obj_ggtt_offset(obj);
offset += reloc->offset;
reloc_page = io_mapping_map_atomic_wc(ggtt->mappable,
offset & PAGE_MASK);
iowrite32(lower_32_bits(delta), reloc_page + offset_in_page(offset));
if (INTEL_INFO(dev)->gen >= 8) {
offset += sizeof(uint32_t);
if (offset_in_page(offset) == 0) {
io_mapping_unmap_atomic(reloc_page);
reloc_page =
io_mapping_map_atomic_wc(ggtt->mappable,
offset);
}
iowrite32(upper_32_bits(delta),
reloc_page + offset_in_page(offset));
}
io_mapping_unmap_atomic(reloc_page);
return 0;
}
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
static void
clflush_write32(void *addr, uint32_t value)
{
/* This is not a fast path, so KISS. */
drm_clflush_virt_range(addr, sizeof(uint32_t));
*(uint32_t *)addr = value;
drm_clflush_virt_range(addr, sizeof(uint32_t));
}
static int
relocate_entry_clflush(struct drm_i915_gem_object *obj,
struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
struct drm_device *dev = obj->base.dev;
uint32_t page_offset = offset_in_page(reloc->offset);
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
uint64_t delta = relocation_target(reloc, target_offset);
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
char *vaddr;
int ret;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
return ret;
drm/i915: mark GEM object pages dirty when mapped & written by the CPU In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11 02:51:23 +08:00
vaddr = kmap_atomic(i915_gem_object_get_dirty_page(obj,
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
reloc->offset >> PAGE_SHIFT));
clflush_write32(vaddr + page_offset, lower_32_bits(delta));
if (INTEL_INFO(dev)->gen >= 8) {
page_offset = offset_in_page(page_offset + sizeof(uint32_t));
if (page_offset == 0) {
kunmap_atomic(vaddr);
drm/i915: mark GEM object pages dirty when mapped & written by the CPU In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11 02:51:23 +08:00
vaddr = kmap_atomic(i915_gem_object_get_dirty_page(obj,
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
(reloc->offset + sizeof(uint32_t)) >> PAGE_SHIFT));
}
clflush_write32(vaddr + page_offset, upper_32_bits(delta));
}
kunmap_atomic(vaddr);
return 0;
}
static bool object_is_idle(struct drm_i915_gem_object *obj)
{
unsigned long active = obj->active;
int idx;
for_each_active(active, idx) {
if (!i915_gem_active_is_idle(&obj->last_read[idx],
&obj->base.dev->struct_mutex))
return false;
}
return true;
}
static int
i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb,
struct drm_i915_gem_relocation_entry *reloc)
{
struct drm_device *dev = obj->base.dev;
struct drm_gem_object *target_obj;
struct drm_i915_gem_object *target_i915_obj;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *target_vma;
uint64_t target_offset;
int ret;
/* we've already hold a reference to all valid objects */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
target_vma = eb_get_vma(eb, reloc->target_handle);
if (unlikely(target_vma == NULL))
return -ENOENT;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
target_i915_obj = target_vma->obj;
target_obj = &target_vma->obj->base;
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
target_offset = gen8_canonical_addr(target_vma->node.start);
/* Sandybridge PPGTT errata: We need a global gtt mapping for MI and
* pipe_control writes because the gpu doesn't properly redirect them
* through the ppgtt for non_secure batchbuffers. */
if (unlikely(IS_GEN6(dev) &&
reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION)) {
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
ret = i915_vma_bind(target_vma, target_i915_obj->cache_level,
PIN_GLOBAL);
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
if (WARN_ONCE(ret, "Unexpected failure to bind target VMA!"))
return ret;
}
/* Validate that the target is in a valid r/w GPU domain */
if (unlikely(reloc->write_domain & (reloc->write_domain - 1))) {
DRM_DEBUG("reloc with multiple write domains: "
"obj %p target %d offset %d "
"read %08x write %08x",
obj, reloc->target_handle,
(int) reloc->offset,
reloc->read_domains,
reloc->write_domain);
return -EINVAL;
}
if (unlikely((reloc->write_domain | reloc->read_domains)
& ~I915_GEM_GPU_DOMAINS)) {
DRM_DEBUG("reloc with read/write non-GPU domains: "
"obj %p target %d offset %d "
"read %08x write %08x",
obj, reloc->target_handle,
(int) reloc->offset,
reloc->read_domains,
reloc->write_domain);
return -EINVAL;
}
target_obj->pending_read_domains |= reloc->read_domains;
target_obj->pending_write_domain |= reloc->write_domain;
/* If the relocation already has the right value in it, no
* more work needs to be done.
*/
if (target_offset == reloc->presumed_offset)
return 0;
/* Check that the relocation address is valid... */
if (unlikely(reloc->offset >
obj->base.size - (INTEL_INFO(dev)->gen >= 8 ? 8 : 4))) {
DRM_DEBUG("Relocation beyond object bounds: "
"obj %p target %d offset %d size %d.\n",
obj, reloc->target_handle,
(int) reloc->offset,
(int) obj->base.size);
return -EINVAL;
}
if (unlikely(reloc->offset & 3)) {
DRM_DEBUG("Relocation not 4-byte aligned: "
"obj %p target %d offset %d.\n",
obj, reloc->target_handle,
(int) reloc->offset);
return -EINVAL;
}
/* We can't wait for rendering with pagefaults disabled */
if (pagefault_disabled() && !object_is_idle(obj))
return -EFAULT;
if (use_cpu_reloc(obj))
ret = relocate_entry_cpu(obj, reloc, target_offset);
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
else if (obj->map_and_fenceable)
ret = relocate_entry_gtt(obj, reloc, target_offset);
else if (static_cpu_has(X86_FEATURE_CLFLUSH))
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
ret = relocate_entry_clflush(obj, reloc, target_offset);
else {
WARN_ONCE(1, "Impossible case in relocation handling\n");
ret = -ENODEV;
}
if (ret)
return ret;
/* and update the user's relocation entry */
reloc->presumed_offset = target_offset;
return 0;
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_relocate_vma(struct i915_vma *vma,
struct eb_vmas *eb)
{
#define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry))
struct drm_i915_gem_relocation_entry stack_reloc[N_RELOC(512)];
struct drm_i915_gem_relocation_entry __user *user_relocs;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
int remain, ret;
user_relocs = u64_to_user_ptr(entry->relocs_ptr);
remain = entry->relocation_count;
while (remain) {
struct drm_i915_gem_relocation_entry *r = stack_reloc;
int count = remain;
if (count > ARRAY_SIZE(stack_reloc))
count = ARRAY_SIZE(stack_reloc);
remain -= count;
if (__copy_from_user_inatomic(r, user_relocs, count*sizeof(r[0])))
return -EFAULT;
do {
u64 offset = r->presumed_offset;
ret = i915_gem_execbuffer_relocate_entry(vma->obj, eb, r);
if (ret)
return ret;
if (r->presumed_offset != offset &&
__put_user(r->presumed_offset, &user_relocs->presumed_offset)) {
return -EFAULT;
}
user_relocs++;
r++;
} while (--count);
}
return 0;
#undef N_RELOC
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_relocate_vma_slow(struct i915_vma *vma,
struct eb_vmas *eb,
struct drm_i915_gem_relocation_entry *relocs)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
const struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
int i, ret;
for (i = 0; i < entry->relocation_count; i++) {
ret = i915_gem_execbuffer_relocate_entry(vma->obj, eb, &relocs[i]);
if (ret)
return ret;
}
return 0;
}
static int
i915_gem_execbuffer_relocate(struct eb_vmas *eb)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
int ret = 0;
/* This is the fast path and we cannot handle a pagefault whilst
* holding the struct mutex lest the user pass in the relocations
* contained within a mmaped bo. For in such a case we, the page
* fault handler would call i915_gem_fault() and we would try to
* acquire the struct mutex again. Obviously this is bad and so
* lockdep complains vehemently.
*/
pagefault_disable();
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, &eb->vmas, exec_list) {
ret = i915_gem_execbuffer_relocate_vma(vma, eb);
if (ret)
break;
}
pagefault_enable();
return ret;
}
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
static bool only_mappable_for_reloc(unsigned int flags)
{
return (flags & (EXEC_OBJECT_NEEDS_FENCE | __EXEC_OBJECT_NEEDS_MAP)) ==
__EXEC_OBJECT_NEEDS_MAP;
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_reserve_vma(struct i915_vma *vma,
struct intel_engine_cs *engine,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
bool *need_reloc)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:10:56 +08:00
struct drm_i915_gem_object *obj = vma->obj;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
uint64_t flags;
int ret;
flags = PIN_USER;
if (entry->flags & EXEC_OBJECT_NEEDS_GTT)
flags |= PIN_GLOBAL;
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
if (!drm_mm_node_allocated(&vma->node)) {
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
/* Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset,
* limit address to the first 4GBs for unflagged objects.
*/
if ((entry->flags & EXEC_OBJECT_SUPPORTS_48B_ADDRESS) == 0)
flags |= PIN_ZONE_4G;
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP)
flags |= PIN_GLOBAL | PIN_MAPPABLE;
if (entry->flags & __EXEC_OBJECT_NEEDS_BIAS)
flags |= BATCH_OFFSET_BIAS | PIN_OFFSET_BIAS;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
if (entry->flags & EXEC_OBJECT_PINNED)
flags |= entry->offset | PIN_OFFSET_FIXED;
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
if ((flags & PIN_MAPPABLE) == 0)
flags |= PIN_HIGH;
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
}
ret = i915_vma_pin(vma,
entry->pad_to_size,
entry->alignment,
flags);
if ((ret == -ENOSPC || ret == -E2BIG) &&
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
only_mappable_for_reloc(entry->flags))
ret = i915_vma_pin(vma,
entry->pad_to_size,
entry->alignment,
flags & ~PIN_MAPPABLE);
if (ret)
return ret;
entry->flags |= __EXEC_OBJECT_HAS_PIN;
if (entry->flags & EXEC_OBJECT_NEEDS_FENCE) {
ret = i915_gem_object_get_fence(obj);
if (ret)
return ret;
if (i915_gem_object_pin_fence(obj))
entry->flags |= __EXEC_OBJECT_HAS_FENCE;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (entry->offset != vma->node.start) {
entry->offset = vma->node.start;
*need_reloc = true;
}
if (entry->flags & EXEC_OBJECT_WRITE) {
obj->base.pending_read_domains = I915_GEM_DOMAIN_RENDER;
obj->base.pending_write_domain = I915_GEM_DOMAIN_RENDER;
}
return 0;
}
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
static bool
need_reloc_mappable(struct i915_vma *vma)
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
{
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
if (entry->relocation_count == 0)
return false;
if (!i915_vma_is_ggtt(vma))
return false;
/* See also use_cpu_reloc() */
if (HAS_LLC(vma->obj->base.dev))
return false;
if (vma->obj->base.write_domain == I915_GEM_DOMAIN_CPU)
return false;
return true;
}
static bool
eb_vma_misplaced(struct i915_vma *vma)
{
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
struct drm_i915_gem_object *obj = vma->obj;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
WARN_ON(entry->flags & __EXEC_OBJECT_NEEDS_MAP &&
!i915_vma_is_ggtt(vma));
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
if (entry->alignment &&
vma->node.start & (entry->alignment - 1))
return true;
if (vma->node.size < entry->pad_to_size)
return true;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
if (entry->flags & EXEC_OBJECT_PINNED &&
vma->node.start != entry->offset)
return true;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
if (entry->flags & __EXEC_OBJECT_NEEDS_BIAS &&
vma->node.start < BATCH_OFFSET_BIAS)
return true;
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
/* avoid costly ping-pong once a batch bo ended up non-mappable */
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP && !obj->map_and_fenceable)
return !only_mappable_for_reloc(entry->flags);
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset There are some allocations that must be only referenced by 32-bit offsets. To limit the chances of having the first 4GB already full, objects not requiring this workaround use DRM_MM_SEARCH_BELOW/ DRM_MM_CREATE_TOP flags In specific, any resource used with flat/heapless (0x00000000-0xfffff000) General State Heap (GSH) or Instruction State Heap (ISH) must be in a 32-bit range, because the General State Offset and Instruction State Offset are limited to 32-bits. Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if they can be allocated above the 32-bit address range. To limit the chances of having the first 4GB already full, objects will use DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible. The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here: http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html v2: Changed flag logic from neeeds_32b, to supports_48b. v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel) v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK to use last PIN_ defined instead of hard-coded value; use correct limit check in eb_vma_misplaced. (Chris) v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris) v6: Apply pin-high for ggtt too (Chris) v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash) Fix check for entries currently using +4GB addresses, use min_t and other polish in object_bind_to_vm (Chris) v8: Commit message updated to point to libdrm patch. v9: vmas are allocated in the correct ozone, so only check flag when the vma has not been allocated. (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01 20:33:57 +08:00
if ((entry->flags & EXEC_OBJECT_SUPPORTS_48B_ADDRESS) == 0 &&
(vma->node.start + vma->node.size - 1) >> 32)
return true;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
return false;
}
static int
i915_gem_execbuffer_reserve(struct intel_engine_cs *engine,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct list_head *vmas,
struct i915_gem_context *ctx,
bool *need_relocs)
{
struct drm_i915_gem_object *obj;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
struct i915_address_space *vm;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct list_head ordered_vmas;
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
struct list_head pinned_vmas;
bool has_fenced_gpu_access = INTEL_GEN(engine->i915) < 4;
int retry;
vm = list_first_entry(vmas, struct i915_vma, exec_list)->vm;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
INIT_LIST_HEAD(&ordered_vmas);
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
INIT_LIST_HEAD(&pinned_vmas);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(vmas)) {
struct drm_i915_gem_exec_object2 *entry;
bool need_fence, need_mappable;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma = list_first_entry(vmas, struct i915_vma, exec_list);
obj = vma->obj;
entry = vma->exec_entry;
if (ctx->flags & CONTEXT_NO_ZEROMAP)
entry->flags |= __EXEC_OBJECT_NEEDS_BIAS;
if (!has_fenced_gpu_access)
entry->flags &= ~EXEC_OBJECT_NEEDS_FENCE;
need_fence =
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
need_mappable = need_fence || need_reloc_mappable(vma);
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
if (entry->flags & EXEC_OBJECT_PINNED)
list_move_tail(&vma->exec_list, &pinned_vmas);
else if (need_mappable) {
entry->flags |= __EXEC_OBJECT_NEEDS_MAP;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_move(&vma->exec_list, &ordered_vmas);
} else
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_move_tail(&vma->exec_list, &ordered_vmas);
obj->base.pending_read_domains = I915_GEM_GPU_DOMAINS & ~I915_GEM_DOMAIN_COMMAND;
obj->base.pending_write_domain = 0;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_splice(&ordered_vmas, vmas);
drm/i915: Add soft-pinning API for execbuffer Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> v2: Fixed incorrect eviction found by Michal Winiarski - fix suggested by Chris Wilson. Fixed incorrect error paths causing crash found by Michal Winiarski. (Not published externally) v3: Rebased because of trivial conflict in object_bind_to_vm. Fixed eviction to allow eviction of soft-pinned objects when another soft-pinned object used by a subsequent execbuffer overlaps reported by Michal Winiarski. (Not published externally) v4: Moved soft-pinned objects to the front of ordered_vmas so that they are pinned first after an address conflict happens to avoid repeated conflicts in rare cases (Suggested by Chris Wilson). Expanded comment on drm_i915_gem_exec_object2.offset to cover this new API. v5: Added I915_PARAM_HAS_EXEC_SOFTPIN parameter for detecting this capability (Kristian). Added check for multiple pinnings on eviction (Akash). Made sure buffers are not considered misplaced without the user specifying EXEC_OBJECT_SUPPORTS_48B_ADDRESS. User must assume responsibility for any addressing workarounds. Updated object2.offset field comment again to clarify NO_RELOC case (Chris). checkpatch cleanup. v6: Trivial rebase on latest drm-intel-nightly v7: Catch attempts to pin above the max virtual address size and return EINVAL (Tvrtko). Decouple EXEC_OBJECT_SUPPORTS_48B_ADDRESS and EXEC_OBJECT_PINNED flags, user must pass both flags in any attempt to pin something at an offset above 4GB (Chris, Daniel Vetter). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Zou Nanhai <nanhai.zou@intel.com> Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: PDT Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449575707-20933-1-git-send-email-thomas.daniel@intel.com
2015-12-08 19:55:07 +08:00
list_splice(&pinned_vmas, vmas);
/* Attempt to pin all of the buffers into the GTT.
* This is done in 3 phases:
*
* 1a. Unbind all objects that do not match the GTT constraints for
* the execbuffer (fenceable, mappable, alignment etc).
* 1b. Increment pin count for already bound objects.
* 2. Bind new objects.
* 3. Decrement pin count.
*
* This avoid unnecessary unbinding of later objects in order to make
* room for the earlier objects *unless* we need to defragment.
*/
retry = 0;
do {
int ret = 0;
/* Unbind any ill-fitting objects or pin. */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
if (!drm_mm_node_allocated(&vma->node))
continue;
if (eb_vma_misplaced(vma))
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = i915_vma_unbind(vma);
else
ret = i915_gem_execbuffer_reserve_vma(vma,
engine,
need_relocs);
if (ret)
goto err;
}
/* Bind fresh objects */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
if (drm_mm_node_allocated(&vma->node))
continue;
ret = i915_gem_execbuffer_reserve_vma(vma, engine,
need_relocs);
if (ret)
goto err;
}
err:
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
if (ret != -ENOSPC || retry++)
return ret;
/* Decrement pin count for bound objects */
list_for_each_entry(vma, vmas, exec_list)
i915_gem_execbuffer_unreserve_vma(vma);
ret = i915_gem_evict_vm(vm, true);
if (ret)
return ret;
} while (1);
}
static int
i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
struct drm_i915_gem_execbuffer2 *args,
struct drm_file *file,
struct intel_engine_cs *engine,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb,
struct drm_i915_gem_exec_object2 *exec,
struct i915_gem_context *ctx)
{
struct drm_i915_gem_relocation_entry *reloc;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_address_space *vm;
struct i915_vma *vma;
bool need_relocs;
int *reloc_offset;
int i, total, ret;
unsigned count = args->buffer_count;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vm = list_first_entry(&eb->vmas, struct i915_vma, exec_list)->vm;
/* We may process another execbuffer during the unlock... */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(&eb->vmas)) {
vma = list_first_entry(&eb->vmas, struct i915_vma, exec_list);
list_del_init(&vma->exec_list);
i915_gem_execbuffer_unreserve_vma(vma);
i915_gem_object_put(vma->obj);
}
mutex_unlock(&dev->struct_mutex);
total = 0;
for (i = 0; i < count; i++)
total += exec[i].relocation_count;
reloc_offset = drm_malloc_ab(count, sizeof(*reloc_offset));
reloc = drm_malloc_ab(total, sizeof(*reloc));
if (reloc == NULL || reloc_offset == NULL) {
drm_free_large(reloc);
drm_free_large(reloc_offset);
mutex_lock(&dev->struct_mutex);
return -ENOMEM;
}
total = 0;
for (i = 0; i < count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
u64 invalid_offset = (u64)-1;
int j;
user_relocs = u64_to_user_ptr(exec[i].relocs_ptr);
if (copy_from_user(reloc+total, user_relocs,
exec[i].relocation_count * sizeof(*reloc))) {
ret = -EFAULT;
mutex_lock(&dev->struct_mutex);
goto err;
}
/* As we do not update the known relocation offsets after
* relocating (due to the complexities in lock handling),
* we need to mark them as invalid now so that we force the
* relocation processing next time. Just in case the target
* object is evicted and then rebound into its old
* presumed_offset before the next execbuffer - if that
* happened we would make the mistake of assuming that the
* relocations were valid.
*/
for (j = 0; j < exec[i].relocation_count; j++) {
if (__copy_to_user(&user_relocs[j].presumed_offset,
&invalid_offset,
sizeof(invalid_offset))) {
ret = -EFAULT;
mutex_lock(&dev->struct_mutex);
goto err;
}
}
reloc_offset[i] = total;
total += exec[i].relocation_count;
}
ret = i915_mutex_lock_interruptible(dev);
if (ret) {
mutex_lock(&dev->struct_mutex);
goto err;
}
/* reacquire the objects */
eb_reset(eb);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = eb_lookup_vmas(eb, exec, args, vm, file);
if (ret)
goto err;
need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0;
ret = i915_gem_execbuffer_reserve(engine, &eb->vmas, ctx,
&need_relocs);
if (ret)
goto err;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, &eb->vmas, exec_list) {
int offset = vma->exec_entry - exec;
ret = i915_gem_execbuffer_relocate_vma_slow(vma, eb,
reloc + reloc_offset[offset]);
if (ret)
goto err;
}
/* Leave the user relocations as are, this is the painfully slow path,
* and we want to avoid the complication of dropping the lock whilst
* having buffers reserved in the aperture and so causing spurious
* ENOSPC for random operations.
*/
err:
drm_free_large(reloc);
drm_free_large(reloc_offset);
return ret;
}
static int
i915_gem_execbuffer_move_to_gpu(struct drm_i915_gem_request *req,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct list_head *vmas)
{
const unsigned other_rings = ~intel_engine_flag(req->engine);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
uint32_t flush_domains = 0;
bool flush_chipset = false;
int ret;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
struct drm_i915_gem_object *obj = vma->obj;
if (obj->active & other_rings) {
ret = i915_gem_object_sync(obj, req);
if (ret)
return ret;
}
if (obj->base.write_domain & I915_GEM_DOMAIN_CPU)
flush_chipset |= i915_gem_clflush_object(obj, false);
flush_domains |= obj->base.write_domain;
}
if (flush_chipset)
i915_gem_chipset_flush(req->engine->i915);
if (flush_domains & I915_GEM_DOMAIN_GTT)
wmb();
/* Unconditionally invalidate GPU caches and TLBs. */
return req->engine->emit_flush(req, EMIT_INVALIDATE);
}
static bool
i915_gem_check_execbuffer(struct drm_i915_gem_execbuffer2 *exec)
{
if (exec->flags & __I915_EXEC_UNKNOWN_FLAGS)
return false;
/* Kernel clipping was a DRI1 misfeature */
if (exec->num_cliprects || exec->cliprects_ptr)
return false;
if (exec->DR4 == 0xffffffff) {
DRM_DEBUG("UXA submitting garbage DR4, fixing up\n");
exec->DR4 = 0;
}
if (exec->DR1 || exec->DR4)
return false;
if ((exec->batch_start_offset | exec->batch_len) & 0x7)
return false;
return true;
}
static int
validate_exec_list(struct drm_device *dev,
struct drm_i915_gem_exec_object2 *exec,
int count)
{
unsigned relocs_total = 0;
unsigned relocs_max = UINT_MAX / sizeof(struct drm_i915_gem_relocation_entry);
unsigned invalid_flags;
int i;
/* INTERNAL flags must not overlap with external ones */
BUILD_BUG_ON(__EXEC_OBJECT_INTERNAL_FLAGS & ~__EXEC_OBJECT_UNKNOWN_FLAGS);
invalid_flags = __EXEC_OBJECT_UNKNOWN_FLAGS;
if (USES_FULL_PPGTT(dev))
invalid_flags |= EXEC_OBJECT_NEEDS_GTT;
for (i = 0; i < count; i++) {
char __user *ptr = u64_to_user_ptr(exec[i].relocs_ptr);
int length; /* limited by fault_in_pages_readable() */
if (exec[i].flags & invalid_flags)
return -EINVAL;
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
/* Offset can be used as input (EXEC_OBJECT_PINNED), reject
* any non-page-aligned or non-canonical addresses.
*/
if (exec[i].flags & EXEC_OBJECT_PINNED) {
if (exec[i].offset !=
gen8_canonical_addr(exec[i].offset & PAGE_MASK))
return -EINVAL;
/* From drm_mm perspective address space is continuous,
* so from this point we're always using non-canonical
* form internally.
*/
exec[i].offset = gen8_noncanonical_addr(exec[i].offset);
}
if (exec[i].alignment && !is_power_of_2(exec[i].alignment))
return -EINVAL;
/* pad_to_size was once a reserved field, so sanitize it */
if (exec[i].flags & EXEC_OBJECT_PAD_TO_SIZE) {
if (offset_in_page(exec[i].pad_to_size))
return -EINVAL;
} else {
exec[i].pad_to_size = 0;
}
/* First check for malicious input causing overflow in
* the worst case where we need to allocate the entire
* relocation tree as a single array.
*/
if (exec[i].relocation_count > relocs_max - relocs_total)
return -EINVAL;
relocs_total += exec[i].relocation_count;
length = exec[i].relocation_count *
sizeof(struct drm_i915_gem_relocation_entry);
/*
* We must check that the entire relocation array is safe
* to read, but since we may need to update the presumed
* offsets during execution, check for full write access.
*/
if (!access_ok(VERIFY_WRITE, ptr, length))
return -EFAULT;
if (likely(!i915.prefault_disable)) {
if (fault_in_multipages_readable(ptr, length))
return -EFAULT;
}
}
return 0;
}
static struct i915_gem_context *
i915_gem_validate_context(struct drm_device *dev, struct drm_file *file,
struct intel_engine_cs *engine, const u32 ctx_id)
{
struct i915_gem_context *ctx = NULL;
struct i915_ctx_hang_stats *hs;
if (engine->id != RCS && ctx_id != DEFAULT_CONTEXT_HANDLE)
return ERR_PTR(-EINVAL);
ctx = i915_gem_context_lookup(file->driver_priv, ctx_id);
if (IS_ERR(ctx))
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return ctx;
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
hs = &ctx->hang_stats;
if (hs->banned) {
DRM_DEBUG("Context %u tried to submit while banned\n", ctx_id);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return ERR_PTR(-EIO);
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return ctx;
}
void i915_vma_move_to_active(struct i915_vma *vma,
struct drm_i915_gem_request *req,
unsigned int flags)
{
struct drm_i915_gem_object *obj = vma->obj;
const unsigned int idx = req->engine->id;
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
obj->dirty = 1; /* be paranoid */
/* Add a reference if we're newly entering the active list.
* The order in which we add operations to the retirement queue is
* vital here: mark_active adds to the start of the callback list,
* such that subsequent callbacks are called first. Therefore we
* add the active reference first and queue for it to be dropped
* *last*.
*/
if (obj->active == 0)
i915_gem_object_get(obj);
obj->active |= 1 << idx;
i915_gem_active_set(&obj->last_read[idx], req);
if (flags & EXEC_OBJECT_WRITE) {
i915_gem_active_set(&obj->last_write, req);
intel_fb_obj_invalidate(obj, ORIGIN_CS);
/* update for the implicit flush after a batch */
obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS;
}
if (flags & EXEC_OBJECT_NEEDS_FENCE) {
i915_gem_active_set(&obj->last_fence, req);
if (flags & __EXEC_OBJECT_HAS_FENCE) {
struct drm_i915_private *dev_priv = req->i915;
list_move_tail(&dev_priv->fence_regs[obj->fence_reg].lru_list,
&dev_priv->mm.fence_list);
}
}
i915_vma_set_active(vma, idx);
i915_gem_active_set(&vma->last_read[idx], req);
list_move_tail(&vma->vm_link, &vma->vm->active_list);
}
static void
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_move_to_active(struct list_head *vmas,
struct drm_i915_gem_request *req)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
struct drm_i915_gem_object *obj = vma->obj;
u32 old_read = obj->base.read_domains;
u32 old_write = obj->base.write_domain;
obj->base.write_domain = obj->base.pending_write_domain;
if (obj->base.write_domain)
vma->exec_entry->flags |= EXEC_OBJECT_WRITE;
else
obj->base.pending_read_domains |= obj->base.read_domains;
obj->base.read_domains = obj->base.pending_read_domains;
i915_vma_move_to_active(vma, req, vma->exec_entry->flags);
trace_i915_gem_object_change_domain(obj, old_read, old_write);
}
}
static int
i915_reset_gen7_sol_offsets(struct drm_i915_gem_request *req)
{
struct intel_ring *ring = req->ring;
int ret, i;
if (!IS_GEN7(req->i915) || req->engine->id != RCS) {
DRM_DEBUG("sol reset is gen7/rcs only\n");
return -EINVAL;
}
ret = intel_ring_begin(req, 4 * 3);
if (ret)
return ret;
for (i = 0; i < 4; i++) {
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit_reg(ring, GEN7_SO_WRITE_OFFSET(i));
intel_ring_emit(ring, 0);
}
intel_ring_advance(ring);
return 0;
}
static struct i915_vma*
i915_gem_execbuffer_parse(struct intel_engine_cs *engine,
struct drm_i915_gem_exec_object2 *shadow_exec_entry,
struct drm_i915_gem_object *batch_obj,
struct eb_vmas *eb,
u32 batch_start_offset,
u32 batch_len,
bool is_master)
{
struct drm_i915_gem_object *shadow_batch_obj;
struct i915_vma *vma;
int ret;
shadow_batch_obj = i915_gem_batch_pool_get(&engine->batch_pool,
PAGE_ALIGN(batch_len));
if (IS_ERR(shadow_batch_obj))
return ERR_CAST(shadow_batch_obj);
ret = intel_engine_cmd_parser(engine,
batch_obj,
shadow_batch_obj,
batch_start_offset,
batch_len,
is_master);
if (ret)
goto err;
ret = i915_gem_object_ggtt_pin(shadow_batch_obj, NULL, 0, 0, 0);
if (ret)
goto err;
i915_gem_object_unpin_pages(shadow_batch_obj);
memset(shadow_exec_entry, 0, sizeof(*shadow_exec_entry));
vma = i915_gem_obj_to_ggtt(shadow_batch_obj);
vma->exec_entry = shadow_exec_entry;
vma->exec_entry->flags = __EXEC_OBJECT_HAS_PIN;
i915_gem_object_get(shadow_batch_obj);
list_add_tail(&vma->exec_list, &eb->vmas);
return vma;
err:
i915_gem_object_unpin_pages(shadow_batch_obj);
if (ret == -EACCES) /* unhandled chained batch */
return NULL;
else
return ERR_PTR(ret);
}
static int
execbuf_submit(struct i915_execbuffer_params *params,
struct drm_i915_gem_execbuffer2 *args,
struct list_head *vmas)
{
struct drm_i915_private *dev_priv = params->request->i915;
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
u64 exec_start, exec_len;
int instp_mode;
u32 instp_mask;
int ret;
ret = i915_gem_execbuffer_move_to_gpu(params->request, vmas);
if (ret)
return ret;
ret = i915_switch_context(params->request);
if (ret)
return ret;
instp_mode = args->flags & I915_EXEC_CONSTANTS_MASK;
instp_mask = I915_EXEC_CONSTANTS_MASK;
switch (instp_mode) {
case I915_EXEC_CONSTANTS_REL_GENERAL:
case I915_EXEC_CONSTANTS_ABSOLUTE:
case I915_EXEC_CONSTANTS_REL_SURFACE:
if (instp_mode != 0 && params->engine->id != RCS) {
DRM_DEBUG("non-0 rel constants mode on non-RCS\n");
return -EINVAL;
}
if (instp_mode != dev_priv->relative_constants_mode) {
if (INTEL_INFO(dev_priv)->gen < 4) {
DRM_DEBUG("no rel constants on pre-gen4\n");
return -EINVAL;
}
if (INTEL_INFO(dev_priv)->gen > 5 &&
instp_mode == I915_EXEC_CONSTANTS_REL_SURFACE) {
DRM_DEBUG("rel surface constants mode invalid on gen5+\n");
return -EINVAL;
}
/* The HW changed the meaning on this bit on gen6 */
if (INTEL_INFO(dev_priv)->gen >= 6)
instp_mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE;
}
break;
default:
DRM_DEBUG("execbuf with unknown constants: %d\n", instp_mode);
return -EINVAL;
}
if (params->engine->id == RCS &&
instp_mode != dev_priv->relative_constants_mode) {
struct intel_ring *ring = params->request->ring;
ret = intel_ring_begin(params->request, 4);
if (ret)
return ret;
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit_reg(ring, INSTPM);
intel_ring_emit(ring, instp_mask << 16 | instp_mode);
intel_ring_advance(ring);
dev_priv->relative_constants_mode = instp_mode;
}
if (args->flags & I915_EXEC_GEN7_SOL_RESET) {
ret = i915_reset_gen7_sol_offsets(params->request);
if (ret)
return ret;
}
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
exec_len = args->batch_len;
exec_start = params->batch->node.start +
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
params->args_batch_start_offset;
if (exec_len == 0)
exec_len = params->batch->size;
ret = params->engine->emit_bb_start(params->request,
exec_start, exec_len,
params->dispatch_flags);
if (ret)
return ret;
trace_i915_gem_ring_dispatch(params->request, params->dispatch_flags);
i915_gem_execbuffer_move_to_active(vmas, params->request);
return 0;
}
/**
* Find one BSD ring to dispatch the corresponding BSD command.
* The engine index is returned.
*/
static unsigned int
gen8_dispatch_bsd_engine(struct drm_i915_private *dev_priv,
struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
/* Check whether the file_priv has already selected one ring. */
if ((int)file_priv->bsd_engine < 0) {
/* If not, use the ping-pong mechanism to select one. */
mutex_lock(&dev_priv->drm.struct_mutex);
file_priv->bsd_engine = dev_priv->mm.bsd_engine_dispatch_index;
dev_priv->mm.bsd_engine_dispatch_index ^= 1;
mutex_unlock(&dev_priv->drm.struct_mutex);
}
return file_priv->bsd_engine;
}
#define I915_USER_RINGS (4)
static const enum intel_engine_id user_ring_map[I915_USER_RINGS + 1] = {
[I915_EXEC_DEFAULT] = RCS,
[I915_EXEC_RENDER] = RCS,
[I915_EXEC_BLT] = BCS,
[I915_EXEC_BSD] = VCS,
[I915_EXEC_VEBOX] = VECS
};
static struct intel_engine_cs *
eb_select_engine(struct drm_i915_private *dev_priv,
struct drm_file *file,
struct drm_i915_gem_execbuffer2 *args)
{
unsigned int user_ring_id = args->flags & I915_EXEC_RING_MASK;
struct intel_engine_cs *engine;
if (user_ring_id > I915_USER_RINGS) {
DRM_DEBUG("execbuf with unknown ring: %u\n", user_ring_id);
return NULL;
}
if ((user_ring_id != I915_EXEC_BSD) &&
((args->flags & I915_EXEC_BSD_MASK) != 0)) {
DRM_DEBUG("execbuf with non bsd ring but with invalid "
"bsd dispatch flags: %d\n", (int)(args->flags));
return NULL;
}
if (user_ring_id == I915_EXEC_BSD && HAS_BSD2(dev_priv)) {
unsigned int bsd_idx = args->flags & I915_EXEC_BSD_MASK;
if (bsd_idx == I915_EXEC_BSD_DEFAULT) {
bsd_idx = gen8_dispatch_bsd_engine(dev_priv, file);
} else if (bsd_idx >= I915_EXEC_BSD_RING1 &&
bsd_idx <= I915_EXEC_BSD_RING2) {
bsd_idx >>= I915_EXEC_BSD_SHIFT;
bsd_idx--;
} else {
DRM_DEBUG("execbuf with unknown bsd ring: %u\n",
bsd_idx);
return NULL;
}
engine = &dev_priv->engine[_VCS(bsd_idx)];
} else {
engine = &dev_priv->engine[user_ring_map[user_ring_id]];
}
if (!intel_engine_initialized(engine)) {
DRM_DEBUG("execbuf with invalid ring: %u\n", user_ring_id);
return NULL;
}
return engine;
}
static int
i915_gem_do_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file,
struct drm_i915_gem_execbuffer2 *args,
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
struct drm_i915_gem_exec_object2 *exec)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct i915_ggtt *ggtt = &dev_priv->ggtt;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb;
drm/i915: Use batch pools with the command parser This patch sets up all of the tracking and copying necessary to use batch pools with the command parser and dispatches the copied (shadow) batch to the hardware. After this patch, the parser is in 'enabling' mode. Note that performance takes a hit from the copy in some cases and will likely need some work. At a rough pass, the memcpy appears to be the bottleneck. Without having done a deeper analysis, two ideas that come to mind are: 1) Copy sections of the batch at a time, as they are reached by parsing. Might improve cache locality. 2) Copy only up to the userspace-supplied batch length and memset the rest of the buffer. Reduces the number of reads. v2: - Remove setting the capacity of the pool - One global pool instead of per-ring pools - Replace batch_obj with shadow_batch_obj and hook into eb->vmas - Memset any space in the shadow batch beyond what gets copied - Rebased on execlist prep refactoring v3: - Rebase on chained batch handling - Squash in setting the secure dispatch flag - Add a note about the interaction w/secure dispatch pinning - Check for request->batch_obj == NULL in i915_gem_free_request v4: - Fix read domains for shadow_batch_obj - Remove the set_to_gtt_domain call from i915_parse_cmds - ggtt_pin/unpin in the parser block to simplify error handling - Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag - Remove i915_gem_batch_pool_put calls v5: - Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after the parser (danvet, from v4 0/7 feedback) Issue: VIZ-4719 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-12 04:13:09 +08:00
struct drm_i915_gem_exec_object2 shadow_exec_entry;
struct intel_engine_cs *engine;
struct i915_gem_context *ctx;
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
struct i915_address_space *vm;
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
struct i915_execbuffer_params params_master; /* XXX: will be removed later */
struct i915_execbuffer_params *params = &params_master;
const u32 ctx_id = i915_execbuffer2_get_context_id(*args);
u32 dispatch_flags;
int ret;
bool need_relocs;
if (!i915_gem_check_execbuffer(args))
return -EINVAL;
ret = validate_exec_list(dev, exec, args->buffer_count);
if (ret)
return ret;
dispatch_flags = 0;
if (args->flags & I915_EXEC_SECURE) {
if (!drm_is_current_master(file) || !capable(CAP_SYS_ADMIN))
return -EPERM;
dispatch_flags |= I915_DISPATCH_SECURE;
}
if (args->flags & I915_EXEC_IS_PINNED)
dispatch_flags |= I915_DISPATCH_PINNED;
engine = eb_select_engine(dev_priv, file, args);
if (!engine)
return -EINVAL;
if (args->buffer_count < 1) {
DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
if (args->flags & I915_EXEC_RESOURCE_STREAMER) {
if (!HAS_RESOURCE_STREAMER(dev)) {
DRM_DEBUG("RS is only allowed for Haswell, Gen8 and above\n");
return -EINVAL;
}
if (engine->id != RCS) {
DRM_DEBUG("RS is not available on %s\n",
engine->name);
return -EINVAL;
}
dispatch_flags |= I915_DISPATCH_RS;
}
/* Take a local wakeref for preparing to dispatch the execbuf as
* we expect to access the hardware fairly frequently in the
* process. Upon first dispatch, we acquire another prolonged
* wakeref that we hold until the GPU has been idle for at least
* 100ms.
*/
intel_runtime_pm_get(dev_priv);
ret = i915_mutex_lock_interruptible(dev);
if (ret)
goto pre_mutex_err;
ctx = i915_gem_validate_context(dev, file, engine, ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ret = PTR_ERR(ctx);
goto pre_mutex_err;
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
i915_gem_context_get(ctx);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
if (ctx->ppgtt)
vm = &ctx->ppgtt->base;
else
vm = &ggtt->base;
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
memset(&params_master, 0x00, sizeof(params_master));
eb = eb_create(args);
if (eb == NULL) {
i915_gem_context_put(ctx);
mutex_unlock(&dev->struct_mutex);
ret = -ENOMEM;
goto pre_mutex_err;
}
/* Look up object handles */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = eb_lookup_vmas(eb, exec, args, vm, file);
if (ret)
goto err;
/* take note of the batch buffer before we might reorder the lists */
params->batch = eb_get_batch(eb);
/* Move the objects en-masse into the GTT, evicting if necessary. */
need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0;
ret = i915_gem_execbuffer_reserve(engine, &eb->vmas, ctx,
&need_relocs);
if (ret)
goto err;
/* The objects are in their final locations, apply the relocations. */
if (need_relocs)
ret = i915_gem_execbuffer_relocate(eb);
if (ret) {
if (ret == -EFAULT) {
ret = i915_gem_execbuffer_relocate_slow(dev, args, file,
engine,
eb, exec, ctx);
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
}
if (ret)
goto err;
}
/* Set the pending read domains for the batch buffer to COMMAND */
if (params->batch->obj->base.pending_write_domain) {
DRM_DEBUG("Attempting to use self-modifying batch buffer\n");
ret = -EINVAL;
goto err;
}
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
params->args_batch_start_offset = args->batch_start_offset;
if (intel_engine_needs_cmd_parser(engine) && args->batch_len) {
struct i915_vma *vma;
vma = i915_gem_execbuffer_parse(engine, &shadow_exec_entry,
params->batch->obj,
eb,
args->batch_start_offset,
args->batch_len,
drm_is_current_master(file));
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
drm/i915: Use batch pools with the command parser This patch sets up all of the tracking and copying necessary to use batch pools with the command parser and dispatches the copied (shadow) batch to the hardware. After this patch, the parser is in 'enabling' mode. Note that performance takes a hit from the copy in some cases and will likely need some work. At a rough pass, the memcpy appears to be the bottleneck. Without having done a deeper analysis, two ideas that come to mind are: 1) Copy sections of the batch at a time, as they are reached by parsing. Might improve cache locality. 2) Copy only up to the userspace-supplied batch length and memset the rest of the buffer. Reduces the number of reads. v2: - Remove setting the capacity of the pool - One global pool instead of per-ring pools - Replace batch_obj with shadow_batch_obj and hook into eb->vmas - Memset any space in the shadow batch beyond what gets copied - Rebased on execlist prep refactoring v3: - Rebase on chained batch handling - Squash in setting the secure dispatch flag - Add a note about the interaction w/secure dispatch pinning - Check for request->batch_obj == NULL in i915_gem_free_request v4: - Fix read domains for shadow_batch_obj - Remove the set_to_gtt_domain call from i915_parse_cmds - ggtt_pin/unpin in the parser block to simplify error handling - Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag - Remove i915_gem_batch_pool_put calls v5: - Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after the parser (danvet, from v4 0/7 feedback) Issue: VIZ-4719 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-12 04:13:09 +08:00
goto err;
}
if (vma) {
/*
* Batch parsed and accepted:
*
* Set the DISPATCH_SECURE bit to remove the NON_SECURE
* bit from MI_BATCH_BUFFER_START commands issued in
* the dispatch_execbuffer implementations. We
* specifically don't want that set on batches the
* command parser has accepted.
*/
dispatch_flags |= I915_DISPATCH_SECURE;
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
params->args_batch_start_offset = 0;
params->batch = vma;
}
}
params->batch->obj->base.pending_read_domains |= I915_GEM_DOMAIN_COMMAND;
drm/i915: Use batch pools with the command parser This patch sets up all of the tracking and copying necessary to use batch pools with the command parser and dispatches the copied (shadow) batch to the hardware. After this patch, the parser is in 'enabling' mode. Note that performance takes a hit from the copy in some cases and will likely need some work. At a rough pass, the memcpy appears to be the bottleneck. Without having done a deeper analysis, two ideas that come to mind are: 1) Copy sections of the batch at a time, as they are reached by parsing. Might improve cache locality. 2) Copy only up to the userspace-supplied batch length and memset the rest of the buffer. Reduces the number of reads. v2: - Remove setting the capacity of the pool - One global pool instead of per-ring pools - Replace batch_obj with shadow_batch_obj and hook into eb->vmas - Memset any space in the shadow batch beyond what gets copied - Rebased on execlist prep refactoring v3: - Rebase on chained batch handling - Squash in setting the secure dispatch flag - Add a note about the interaction w/secure dispatch pinning - Check for request->batch_obj == NULL in i915_gem_free_request v4: - Fix read domains for shadow_batch_obj - Remove the set_to_gtt_domain call from i915_parse_cmds - ggtt_pin/unpin in the parser block to simplify error handling - Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag - Remove i915_gem_batch_pool_put calls v5: - Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after the parser (danvet, from v4 0/7 feedback) Issue: VIZ-4719 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-12 04:13:09 +08:00
/* snb/ivb/vlv conflate the "batch in ppgtt" bit with the "non-secure
* batch" bit. Hence we need to pin secure batches into the global gtt.
* hsw should have this fixed, but bdw mucks it up again. */
if (dispatch_flags & I915_DISPATCH_SECURE) {
struct drm_i915_gem_object *obj = params->batch->obj;
/*
* So on first glance it looks freaky that we pin the batch here
* outside of the reservation loop. But:
* - The batch is already pinned into the relevant ppgtt, so we
* already have the backing storage fully allocated.
* - No other BO uses the global gtt (well contexts, but meh),
* so we don't really have issues with multiple objects not
* fitting due to fragmentation.
* So this is actually safe.
*/
ret = i915_gem_object_ggtt_pin(obj, NULL, 0, 0, 0);
if (ret)
goto err;
params->batch = i915_gem_obj_to_ggtt(obj);
}
/* Allocate a request for this batch buffer nice and early. */
params->request = i915_gem_request_alloc(engine, ctx);
if (IS_ERR(params->request)) {
ret = PTR_ERR(params->request);
goto err_batch_unpin;
drm/i915: simplify allocation of driver-internal requests There are a number of places where the driver needs a request, but isn't working on behalf of any specific user or in a specific context. At present, we associate them with the per-engine default context. A future patch will abolish those per-engine context pointers; but we can already eliminate a lot of the references to them, just by making the allocator allow NULL as a shorthand for "an appropriate context for this ring", which will mean that the callers don't need to know anything about how the "appropriate context" is found (e.g. per-ring vs per-device, etc). So this patch renames the existing i915_gem_request_alloc(), and makes it local (static inline), and replaces it with a wrapper that provides a default if the context is NULL, and also has a nicer calling convention (doesn't require a pointer to an output parameter). Then we change all callers to use the new convention: OLD: err = i915_gem_request_alloc(ring, user_ctx, &req); if (err) ... NEW: req = i915_gem_request_alloc(ring, user_ctx); if (IS_ERR(req)) ... OLD: err = i915_gem_request_alloc(ring, ring->default_context, &req); if (err) ... NEW: req = i915_gem_request_alloc(ring, NULL); if (IS_ERR(req)) ... v4: Rebased Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Nick Hoath <nicholas.hoath@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-2-git-send-email-david.s.gordon@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-20 03:02:53 +08:00
}
ret = i915_gem_request_add_to_client(params->request, file);
drm/i915: Move the request/file and request/pid association to creation time In _i915_add_request(), the request is associated with a userland client. Specifically it is linked to the 'file' structure and the current user process is recorded. One problem here is that the current user process is not necessarily the same as when the request was submitted to the driver. This is especially true when the GPU scheduler arrives and decouples driver submission from hardware submission. Note also that it is only in the case where the add request comes from an execbuff call that there is a client to associate. Any other add request call is kernel only so does not need to do it. This patch moves the client association into a separate function. This is then called from the execbuffer code path itself at a sensible time. It also removes the now redundant 'file' pointer from the add request parameter list. An extra cleanup of the client association is also added to the request clean up code for the eventuality where the request is killed after association but before being submitted (e.g. due to out of memory error somewhere). Once the submission has happened, the request is on the request list and the regular request list removal will clear the association. Note that this still needs to happen at this point in time because the request might be kept floating around much longer (due to someone holding a reference count) and the client should not be worrying about this request after it has been retired. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:44:12 +08:00
if (ret)
drm/i915: Late request cancellations are harmful Conceptually, each request is a record of a hardware transaction - we build up a list of pending commands and then either commit them to hardware, or cancel them. However, whilst building up the list of pending commands, we may modify state outside of the request and make references to the pending request. If we do so and then cancel that request, external objects then point to the deleted request leading to both graphical and memory corruption. The easiest example is to consider object/VMA tracking. When we mark an object as active in a request, we store a pointer to this, the most recent request, in the object. Then we want to free that object, we wait for the most recent request to be idle before proceeding (otherwise the hardware will write to pages now owned by the system, or we will attempt to read from those pages before the hardware is finished writing). If the request was cancelled instead, that wait completes immediately. As a result, all requests must be committed and not cancelled if the external state is unknown. All that remains of i915_gem_request_cancel() users are just a couple of extremely unlikely allocation failures, so remove the API entirely. A consequence of committing all incomplete requests is that we generate excess breadcrumbs and fill the ring much more often with dummy work. We have completely undone the outstanding_last_seqno optimisation. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93907 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-16-git-send-email-chris@chris-wilson.co.uk
2016-04-14 00:35:15 +08:00
goto err_request;
drm/i915: Move the request/file and request/pid association to creation time In _i915_add_request(), the request is associated with a userland client. Specifically it is linked to the 'file' structure and the current user process is recorded. One problem here is that the current user process is not necessarily the same as when the request was submitted to the driver. This is especially true when the GPU scheduler arrives and decouples driver submission from hardware submission. Note also that it is only in the case where the add request comes from an execbuff call that there is a client to associate. Any other add request call is kernel only so does not need to do it. This patch moves the client association into a separate function. This is then called from the execbuffer code path itself at a sensible time. It also removes the now redundant 'file' pointer from the add request parameter list. An extra cleanup of the client association is also added to the request clean up code for the eventuality where the request is killed after association but before being submitted (e.g. due to out of memory error somewhere). Once the submission has happened, the request is on the request list and the regular request list removal will clear the association. Note that this still needs to happen at this point in time because the request might be kept floating around much longer (due to someone holding a reference count) and the client should not be worrying about this request after it has been retired. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:44:12 +08:00
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
/*
* Save assorted stuff away to pass through to *_submission().
* NB: This data should be 'persistent' and not local as it will
* kept around beyond the duration of the IOCTL once the GPU
* scheduler arrives.
*/
params->dev = dev;
params->file = file;
params->engine = engine;
drm/i915: Merged the many do_execbuf() parameters into a structure The do_execbuf() function takes quite a few parameters. The actual set of parameters is going to change with the conversion to passing requests around. Further, it is due to grow massively with the arrival of the GPU scheduler. This patch simplifies the prototype by passing a parameter structure instead. Changing the parameter set in the future is then simply a matter of adding/removing items to the structure. Note that the structure does not contain absolutely everything that is passed in. This is because the intention is to use this structure more extensively later in this patch series and more especially in the GPU scheduler that is coming soon. The latter requires hanging on to the structure as the final hardware submission can be delayed until long after the execbuf IOCTL has returned to user land. Thus it is unsafe to put anything in the structure that is local to the IOCTL call itself - such as the 'args' parameter. All entries must be copies of data or pointers to structures that are reference counted in some way and guaranteed to exist for the duration of the batch buffer's life. v2: Rebased to newer tree and updated for changes to the command parser. Specifically, a code shuffle has required saving the batch start address in the params structure. For: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-30 00:43:27 +08:00
params->dispatch_flags = dispatch_flags;
params->ctx = ctx;
ret = execbuf_submit(params, args, &eb->vmas);
drm/i915: Late request cancellations are harmful Conceptually, each request is a record of a hardware transaction - we build up a list of pending commands and then either commit them to hardware, or cancel them. However, whilst building up the list of pending commands, we may modify state outside of the request and make references to the pending request. If we do so and then cancel that request, external objects then point to the deleted request leading to both graphical and memory corruption. The easiest example is to consider object/VMA tracking. When we mark an object as active in a request, we store a pointer to this, the most recent request, in the object. Then we want to free that object, we wait for the most recent request to be idle before proceeding (otherwise the hardware will write to pages now owned by the system, or we will attempt to read from those pages before the hardware is finished writing). If the request was cancelled instead, that wait completes immediately. As a result, all requests must be committed and not cancelled if the external state is unknown. All that remains of i915_gem_request_cancel() users are just a couple of extremely unlikely allocation failures, so remove the API entirely. A consequence of committing all incomplete requests is that we generate excess breadcrumbs and fill the ring much more often with dummy work. We have completely undone the outstanding_last_seqno optimisation. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93907 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-16-git-send-email-chris@chris-wilson.co.uk
2016-04-14 00:35:15 +08:00
err_request:
__i915_add_request(params->request, params->batch->obj, ret == 0);
err_batch_unpin:
/*
* FIXME: We crucially rely upon the active tracking for the (ppgtt)
* batch vma for correctness. For less ugly and less fragility this
* needs to be adjusted to also track the ggtt batch vma properly as
* active.
*/
if (dispatch_flags & I915_DISPATCH_SECURE)
i915_vma_unpin(params->batch);
err:
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
/* the request owns the ref now */
i915_gem_context_put(ctx);
eb_destroy(eb);
mutex_unlock(&dev->struct_mutex);
pre_mutex_err:
/* intel_gpu_busy should also get a ref, so it will free when the device
* is really idle. */
intel_runtime_pm_put(dev_priv);
return ret;
}
/*
* Legacy execbuffer just creates an exec2 list from the original exec object
* list array and passes it to the real function.
*/
int
i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_execbuffer *args = data;
struct drm_i915_gem_execbuffer2 exec2;
struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_i915_gem_exec_object2 *exec2_list = NULL;
int ret, i;
if (args->buffer_count < 1) {
DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
/* Copy in the exec list from userland */
exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
if (exec_list == NULL || exec2_list == NULL) {
DRM_DEBUG("Failed to allocate exec list for %d buffers\n",
args->buffer_count);
drm_free_large(exec_list);
drm_free_large(exec2_list);
return -ENOMEM;
}
ret = copy_from_user(exec_list,
u64_to_user_ptr(args->buffers_ptr),
sizeof(*exec_list) * args->buffer_count);
if (ret != 0) {
DRM_DEBUG("copy %d exec entries failed %d\n",
args->buffer_count, ret);
drm_free_large(exec_list);
drm_free_large(exec2_list);
return -EFAULT;
}
for (i = 0; i < args->buffer_count; i++) {
exec2_list[i].handle = exec_list[i].handle;
exec2_list[i].relocation_count = exec_list[i].relocation_count;
exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
exec2_list[i].alignment = exec_list[i].alignment;
exec2_list[i].offset = exec_list[i].offset;
if (INTEL_INFO(dev)->gen < 4)
exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
else
exec2_list[i].flags = 0;
}
exec2.buffers_ptr = args->buffers_ptr;
exec2.buffer_count = args->buffer_count;
exec2.batch_start_offset = args->batch_start_offset;
exec2.batch_len = args->batch_len;
exec2.DR1 = args->DR1;
exec2.DR4 = args->DR4;
exec2.num_cliprects = args->num_cliprects;
exec2.cliprects_ptr = args->cliprects_ptr;
exec2.flags = I915_EXEC_RENDER;
i915_execbuffer2_set_context_id(exec2, 0);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ret = i915_gem_do_execbuffer(dev, data, file, &exec2, exec2_list);
if (!ret) {
struct drm_i915_gem_exec_object __user *user_exec_list =
u64_to_user_ptr(args->buffers_ptr);
/* Copy the new buffer offsets back to the user's exec list. */
for (i = 0; i < args->buffer_count; i++) {
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
exec2_list[i].offset =
gen8_canonical_addr(exec2_list[i].offset);
ret = __copy_to_user(&user_exec_list[i].offset,
&exec2_list[i].offset,
sizeof(user_exec_list[i].offset));
if (ret) {
ret = -EFAULT;
DRM_DEBUG("failed to copy %d exec entries "
"back to user (%d)\n",
args->buffer_count, ret);
break;
}
}
}
drm_free_large(exec_list);
drm_free_large(exec2_list);
return ret;
}
int
i915_gem_execbuffer2(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_execbuffer2 *args = data;
struct drm_i915_gem_exec_object2 *exec2_list = NULL;
int ret;
if (args->buffer_count < 1 ||
args->buffer_count > UINT_MAX / sizeof(*exec2_list)) {
DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count);
return -EINVAL;
}
if (args->rsvd2 != 0) {
DRM_DEBUG("dirty rvsd2 field\n");
return -EINVAL;
}
exec2_list = drm_malloc_gfp(args->buffer_count,
sizeof(*exec2_list),
GFP_TEMPORARY);
if (exec2_list == NULL) {
DRM_DEBUG("Failed to allocate exec list for %d buffers\n",
args->buffer_count);
return -ENOMEM;
}
ret = copy_from_user(exec2_list,
u64_to_user_ptr(args->buffers_ptr),
sizeof(*exec2_list) * args->buffer_count);
if (ret != 0) {
DRM_DEBUG("copy %d exec entries failed %d\n",
args->buffer_count, ret);
drm_free_large(exec2_list);
return -EFAULT;
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ret = i915_gem_do_execbuffer(dev, data, file, args, exec2_list);
if (!ret) {
/* Copy the new buffer offsets back to the user's exec list. */
struct drm_i915_gem_exec_object2 __user *user_exec_list =
u64_to_user_ptr(args->buffers_ptr);
int i;
for (i = 0; i < args->buffer_count; i++) {
drm/i915: Avoid writing relocs with addresses in non-canonical form According to PRM, some parts of HW require the addresses to be in a canonical form, where bits [63:48] == [47]. Let's convert addresses to canonical form prior to relocating and return converted offsets to userspace. We also need to make sure that userspace is using addresses in canonical form in case of softpin. v2: Whitespace fixup, gen8_canonical_addr description (Chris, Ville) v3: Rebase on top of softpin, fix a hole in relocate_entry, s/expect/require (Chris) v4: Handle softpin in validate_exec_list (Chris) v5: Convert back to canonical form at copy_to_user time (Chris) v6: Don't use struct exec_object2 in place of exec_object v7: Use sign_extend64 for converting to canonical form (Joonas), reject non-canonical and non-page-aligned offset for softpin (Chris) v8: Convert back to non-canonical form in a function, split the test for EXEC_OBJECT_PINNED (Chris) v9: s/canonial/canonical, drop accidental double newline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451409892-13708-1-git-send-email-michal.winiarski@intel.com Testcase: igt/gem_bad_reloc/negative-reloc-blt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92699 Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-30 01:24:52 +08:00
exec2_list[i].offset =
gen8_canonical_addr(exec2_list[i].offset);
ret = __copy_to_user(&user_exec_list[i].offset,
&exec2_list[i].offset,
sizeof(user_exec_list[i].offset));
if (ret) {
ret = -EFAULT;
DRM_DEBUG("failed to copy %d exec entries "
"back to user\n",
args->buffer_count);
break;
}
}
}
drm_free_large(exec2_list);
return ret;
}