korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-13 23:34:05 +08:00
Code Issues Packages Projects Releases Wiki Activity
de4eda9de2
linux/net/sched/sch_taprio.c

2159 lines
54 KiB
C
Raw Normal View History

tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
// SPDX-License-Identifier: GPL-2.0
/* net/sched/sch_taprio.c Time Aware Priority Scheduler
*
* Authors: Vinicius Costa Gomes <vinicius.gomes@intel.com>
*
*/
net: don't include ethtool.h from netdevice.h linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21 06:50:52 +08:00
#include <linux/ethtool.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 04:51:57 +08:00
#include <linux/math64.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
#include <linux/module.h>
#include <linux/spinlock.h>
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
#include <linux/rcupdate.h>
time64.h: consolidate uses of PSEC_PER_NSEC Time-sensitive networking code needs to work with PTP times expressed in nanoseconds, and with packet transmission times expressed in picoseconds, since those would be fractional at higher than gigabit speed when expressed in nanoseconds. Convert the existing uses in tc-taprio and the ocelot/felix DSA driver to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h because the vDSO library does not (yet) need/use it. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 22:52:38 +08:00
#include <linux/time.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
#include <net/sch_generic.h>
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
#include <net/sock.h>
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:19 +08:00
#include <net/tcp.h>
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
static LIST_HEAD(taprio_list);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
#define TAPRIO_ALL_GATES_OPEN -1
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
#define TXTIME_ASSIST_IS_ENABLED(flags) ((flags) & TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST)
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
#define FULL_OFFLOAD_IS_ENABLED(flags) ((flags) & TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD)
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
#define TAPRIO_FLAGS_INVALID U32_MAX
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct sched_entry {
struct list_head list;
/* The instant that this entry "closes" and the next one
* should open, the qdisc will make some effort so that no
* packet leaves after this time.
*/
ktime_t close_time;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
ktime_t next_txtime;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
atomic_t budget;
int index;
u32 gate_mask;
u32 interval;
u8 command;
};
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list {
struct rcu_head rcu;
struct list_head entries;
size_t num_entries;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
ktime_t cycle_close_time;
s64 cycle_time;
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:33 +08:00
s64 cycle_time_extension;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
s64 base_time;
};
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct taprio_sched {
struct Qdisc **qdiscs;
struct Qdisc *root;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
u32 flags;
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
enum tk_offsets tk_offset;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
int clockid;
net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:08:01 +08:00
bool offloaded;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
atomic64_t picos_per_byte; /* Using picoseconds because for 10Gbps+
* speeds it's sub-nanoseconds per byte
*/
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
/* Protects the update side of the RCU protected current_entry */
spinlock_t current_entry_lock;
struct sched_entry __rcu *current_entry;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list __rcu *oper_sched;
struct sched_gate_list __rcu *admin_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct hrtimer advance_timer;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
struct list_head taprio_list;
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
u32 max_frm_len[TC_MAX_QUEUE]; /* for the fast path */
u32 max_sdu[TC_MAX_QUEUE]; /* for dump and offloading */
fix: taprio: Change type of txtime-delay parameter to u32 During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17 03:52:18 +08:00
u32 txtime_delay;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
};
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
struct __tc_taprio_qopt_offload {
refcount_t users;
struct tc_taprio_qopt_offload offload;
};
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static ktime_t sched_base_time(const struct sched_gate_list *sched)
{
if (!sched)
return KTIME_MAX;
return ns_to_ktime(sched->base_time);
}
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
static ktime_t taprio_mono_to_any(const struct taprio_sched *q, ktime_t mono)
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
{
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
/* This pairs with WRITE_ONCE() in taprio_parse_clockid() */
enum tk_offsets tk_offset = READ_ONCE(q->tk_offset);
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
switch (tk_offset) {
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
case TK_OFFS_MAX:
return mono;
default:
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
return ktime_mono_to_any(mono, tk_offset);
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
}
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
}
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
static ktime_t taprio_get_time(const struct taprio_sched *q)
{
return taprio_mono_to_any(q, ktime_get());
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static void taprio_free_sched_cb(struct rcu_head *head)
{
struct sched_gate_list *sched = container_of(head, struct sched_gate_list, rcu);
struct sched_entry *entry, *n;
list_for_each_entry_safe(entry, n, &sched->entries, list) {
list_del(&entry->list);
kfree(entry);
}
kfree(sched);
}
static void switch_schedules(struct taprio_sched *q,
struct sched_gate_list **admin,
struct sched_gate_list **oper)
{
rcu_assign_pointer(q->oper_sched, *admin);
rcu_assign_pointer(q->admin_sched, NULL);
if (*oper)
call_rcu(&(*oper)->rcu, taprio_free_sched_cb);
*oper = *admin;
*admin = NULL;
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
/* Get how much time has been already elapsed in the current cycle. */
static s32 get_cycle_time_elapsed(struct sched_gate_list *sched, ktime_t time)
{
ktime_t time_since_sched_start;
s32 time_elapsed;
time_since_sched_start = ktime_sub(time, sched->base_time);
div_s64_rem(time_since_sched_start, sched->cycle_time, &time_elapsed);
return time_elapsed;
}
static ktime_t get_interval_end_time(struct sched_gate_list *sched,
struct sched_gate_list *admin,
struct sched_entry *entry,
ktime_t intv_start)
{
s32 cycle_elapsed = get_cycle_time_elapsed(sched, intv_start);
ktime_t intv_end, cycle_ext_end, cycle_end;
cycle_end = ktime_add_ns(intv_start, sched->cycle_time - cycle_elapsed);
intv_end = ktime_add_ns(intv_start, entry->interval);
cycle_ext_end = ktime_add(cycle_end, sched->cycle_time_extension);
if (ktime_before(intv_end, cycle_end))
return intv_end;
else if (admin && admin != sched &&
ktime_after(admin->base_time, cycle_end) &&
ktime_before(admin->base_time, cycle_ext_end))
return admin->base_time;
else
return cycle_end;
}
static int length_to_duration(struct taprio_sched *q, int len)
{
time64.h: consolidate uses of PSEC_PER_NSEC Time-sensitive networking code needs to work with PTP times expressed in nanoseconds, and with packet transmission times expressed in picoseconds, since those would be fractional at higher than gigabit speed when expressed in nanoseconds. Convert the existing uses in tc-taprio and the ocelot/felix DSA driver to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h because the vDSO library does not (yet) need/use it. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 22:52:38 +08:00
return div_u64(len * atomic64_read(&q->picos_per_byte), PSEC_PER_NSEC);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
}
/* Returns the entry corresponding to next available interval. If
* validate_interval is set, it only validates whether the timestamp occurs
* when the gate corresponding to the skb's traffic class is open.
*/
static struct sched_entry *find_entry_to_transmit(struct sk_buff *skb,
struct Qdisc *sch,
struct sched_gate_list *sched,
struct sched_gate_list *admin,
ktime_t time,
ktime_t *interval_start,
ktime_t *interval_end,
bool validate_interval)
{
ktime_t curr_intv_start, curr_intv_end, cycle_end, packet_transmit_time;
ktime_t earliest_txtime = KTIME_MAX, txtime, cycle, transmit_end_time;
struct sched_entry *entry = NULL, *entry_found = NULL;
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
bool entry_available = false;
s32 cycle_elapsed;
int tc, n;
tc = netdev_get_prio_tc_map(dev, skb->priority);
packet_transmit_time = length_to_duration(q, qdisc_pkt_len(skb));
*interval_start = 0;
*interval_end = 0;
if (!sched)
return NULL;
cycle = sched->cycle_time;
cycle_elapsed = get_cycle_time_elapsed(sched, time);
curr_intv_end = ktime_sub_ns(time, cycle_elapsed);
cycle_end = ktime_add_ns(curr_intv_end, cycle);
list_for_each_entry(entry, &sched->entries, list) {
curr_intv_start = curr_intv_end;
curr_intv_end = get_interval_end_time(sched, admin, entry,
curr_intv_start);
if (ktime_after(curr_intv_start, cycle_end))
break;
if (!(entry->gate_mask & BIT(tc)) ||
packet_transmit_time > entry->interval)
continue;
txtime = entry->next_txtime;
if (ktime_before(txtime, time) || validate_interval) {
transmit_end_time = ktime_add_ns(time, packet_transmit_time);
if ((ktime_before(curr_intv_start, time) &&
ktime_before(transmit_end_time, curr_intv_end)) ||
(ktime_after(curr_intv_start, time) && !validate_interval)) {
entry_found = entry;
*interval_start = curr_intv_start;
*interval_end = curr_intv_end;
break;
} else if (!entry_available && !validate_interval) {
/* Here, we are just trying to find out the
* first available interval in the next cycle.
*/
taprio: boolean values to a bool variable Fix the following coccicheck warnings: ./net/sched/sch_taprio.c:393:3-16: WARNING: Assignment of 0/1 to bool variable. ./net/sched/sch_taprio.c:375:2-15: WARNING: Assignment of 0/1 to bool variable. ./net/sched/sch_taprio.c:244:4-19: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1610958662-71166-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18 16:31:02 +08:00
entry_available = true;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
entry_found = entry;
*interval_start = ktime_add_ns(curr_intv_start, cycle);
*interval_end = ktime_add_ns(curr_intv_end, cycle);
}
} else if (ktime_before(txtime, earliest_txtime) &&
!entry_available) {
earliest_txtime = txtime;
entry_found = entry;
n = div_s64(ktime_sub(txtime, curr_intv_start), cycle);
*interval_start = ktime_add(curr_intv_start, n * cycle);
*interval_end = ktime_add(curr_intv_end, n * cycle);
}
}
return entry_found;
}
static bool is_valid_interval(struct sk_buff *skb, struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct sched_gate_list *sched, *admin;
ktime_t interval_start, interval_end;
struct sched_entry *entry;
rcu_read_lock();
sched = rcu_dereference(q->oper_sched);
admin = rcu_dereference(q->admin_sched);
entry = find_entry_to_transmit(skb, sch, sched, admin, skb->tstamp,
&interval_start, &interval_end, true);
rcu_read_unlock();
return entry;
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
static bool taprio_flags_valid(u32 flags)
{
/* Make sure no other flag bits are set. */
if (flags & ~(TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST |
TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD))
return false;
/* txtime-assist and full offload are mutually exclusive */
if ((flags & TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST) &&
(flags & TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD))
return false;
return true;
}
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:19 +08:00
/* This returns the tstamp value set by TCP in terms of the set clock. */
static ktime_t get_tcp_tstamp(struct taprio_sched *q, struct sk_buff *skb)
{
unsigned int offset = skb_network_offset(skb);
const struct ipv6hdr *ipv6h;
const struct iphdr *iph;
struct ipv6hdr _ipv6h;
ipv6h = skb_header_pointer(skb, offset, sizeof(_ipv6h), &_ipv6h);
if (!ipv6h)
return 0;
if (ipv6h->version == 4) {
iph = (struct iphdr *)ipv6h;
offset += iph->ihl * 4;
/* special-case 6in4 tunnelling, as that is a common way to get
* v6 connectivity in the home
*/
if (iph->protocol == IPPROTO_IPV6) {
ipv6h = skb_header_pointer(skb, offset,
sizeof(_ipv6h), &_ipv6h);
if (!ipv6h || ipv6h->nexthdr != IPPROTO_TCP)
return 0;
} else if (iph->protocol != IPPROTO_TCP) {
return 0;
}
} else if (ipv6h->version == 6 && ipv6h->nexthdr != IPPROTO_TCP) {
return 0;
}
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
return taprio_mono_to_any(q, skb->skb_mstamp_ns);
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:19 +08:00
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
/* There are a few scenarios where we will have to modify the txtime from
* what is read from next_txtime in sched_entry. They are:
* 1. If txtime is in the past,
* a. The gate for the traffic class is currently open and packet can be
* transmitted before it closes, schedule the packet right away.
* b. If the gate corresponding to the traffic class is going to open later
* in the cycle, set the txtime of packet to the interval start.
* 2. If txtime is in the future, there are packets corresponding to the
* current traffic class waiting to be transmitted. So, the following
* possibilities exist:
* a. We can transmit the packet before the window containing the txtime
* closes.
* b. The window might close before the transmission can be completed
* successfully. So, schedule the packet in the next open window.
*/
static long get_packet_txtime(struct sk_buff *skb, struct Qdisc *sch)
{
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:19 +08:00
ktime_t transmit_end_time, interval_end, interval_start, tcp_tstamp;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
struct taprio_sched *q = qdisc_priv(sch);
struct sched_gate_list *sched, *admin;
ktime_t minimum_time, now, txtime;
int len, packet_transmit_time;
struct sched_entry *entry;
bool sched_changed;
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
now = taprio_get_time(q);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
minimum_time = ktime_add_ns(now, q->txtime_delay);
taprio: Adjust timestamps for TCP packets When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:19 +08:00
tcp_tstamp = get_tcp_tstamp(q, skb);
minimum_time = max_t(ktime_t, minimum_time, tcp_tstamp);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
rcu_read_lock();
admin = rcu_dereference(q->admin_sched);
sched = rcu_dereference(q->oper_sched);
if (admin && ktime_after(minimum_time, admin->base_time))
switch_schedules(q, &admin, &sched);
/* Until the schedule starts, all the queues are open */
if (!sched || ktime_before(minimum_time, sched->base_time)) {
txtime = minimum_time;
goto done;
}
len = qdisc_pkt_len(skb);
packet_transmit_time = length_to_duration(q, len);
do {
taprio: boolean values to a bool variable Fix the following coccicheck warnings: ./net/sched/sch_taprio.c:393:3-16: WARNING: Assignment of 0/1 to bool variable. ./net/sched/sch_taprio.c:375:2-15: WARNING: Assignment of 0/1 to bool variable. ./net/sched/sch_taprio.c:244:4-19: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1610958662-71166-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18 16:31:02 +08:00
sched_changed = false;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
entry = find_entry_to_transmit(skb, sch, sched, admin,
minimum_time,
&interval_start, &interval_end,
false);
if (!entry) {
txtime = 0;
goto done;
}
txtime = entry->next_txtime;
txtime = max_t(ktime_t, txtime, minimum_time);
txtime = max_t(ktime_t, txtime, interval_start);
if (admin && admin != sched &&
ktime_after(txtime, admin->base_time)) {
sched = admin;
taprio: boolean values to a bool variable Fix the following coccicheck warnings: ./net/sched/sch_taprio.c:393:3-16: WARNING: Assignment of 0/1 to bool variable. ./net/sched/sch_taprio.c:375:2-15: WARNING: Assignment of 0/1 to bool variable. ./net/sched/sch_taprio.c:244:4-19: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1610958662-71166-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18 16:31:02 +08:00
sched_changed = true;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
continue;
}
transmit_end_time = ktime_add(txtime, packet_transmit_time);
minimum_time = transmit_end_time;
/* Update the txtime of current entry to the next time it's
* interval starts.
*/
if (ktime_after(transmit_end_time, interval_end))
entry->next_txtime = ktime_add(interval_start, sched->cycle_time);
} while (sched_changed || ktime_after(transmit_end_time, interval_end));
entry->next_txtime = transmit_end_time;
done:
rcu_read_unlock();
return txtime;
}
taprio: Handle short intervals and large packets When using short intervals e.g. below one millisecond, large packets won't be transmitted at all. The software implementations checks whether the packet can be fit into the remaining interval. Therefore, it takes the packet length and the transmission speed into account. That is correct. However, for large packets it may be that the transmission time exceeds the interval resulting in no packet transmission. The same situation works fine with hardware offloading applied. The problem has been observed with the following schedule and iperf3: |tc qdisc replace dev lan1 parent root handle 100 taprio \ | num_tc 8 \ | map 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 \ | queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ | base-time $base \ | sched-entry S 0x40 500000 \ | sched-entry S 0xbf 500000 \ | clockid CLOCK_TAI \ | flags 0x00 [...] |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |[ 5] local 192.168.2.121 port 52610 connected to 192.168.2.105 port 5201 |[ ID] Interval Transfer Bitrate Retr Cwnd |[ 5] 0.00-1.00 sec 45.2 KBytes 370 Kbits/sec 0 1.41 KBytes |[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes After debugging, it seems that the packet length stored in the SKB is about 7000-8000 bytes. Using a 100 Mbit/s link the transmission time is about 600us which larger than the interval of 500us. Therefore, segment the SKB into smaller chunks if the packet is too big. This yields similar results than the hardware offload: |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |- - - - - - - - - - - - - - - - - - - - - - - - - |[ ID] Interval Transfer Bitrate Retr |[ 5] 0.00-10.00 sec 48.9 MBytes 41.0 Mbits/sec 0 sender |[ 5] 0.00-10.02 sec 48.7 MBytes 40.7 Mbits/sec receiver Furthermore, the segmentation can be skipped for the full offload case, as the driver or the hardware is expected to handle this. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 15:34:55 +08:00
static int taprio_enqueue_one(struct sk_buff *skb, struct Qdisc *sch,
struct Qdisc *child, struct sk_buff **to_free)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
struct taprio_sched *q = qdisc_priv(sch);
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
struct net_device *dev = qdisc_dev(sch);
int prio = skb->priority;
u8 tc;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
net/sched: taprio: Check if socket flags are valid A user may set the SO_TXTIME socket option to ensure a packet is send at a given time. The taprio scheduler has to confirm, that it is allowed to send a packet at that given time, by a check against the packet time schedule. The scheduler drop the packet, if the gates are closed at the given send time. The check, if SO_TXTIME is set, may fail since sk_flags are part of an union and the union is used otherwise. This happen, if a socket is not a full socket, like a request socket for example. Add a check to verify, if the union is used for sk_flags. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08 17:47:45 +08:00
/* sk_flags are only safe to use on full sockets. */
if (skb->sk && sk_fullsock(skb->sk) && sock_flag(skb->sk, SOCK_TXTIME)) {
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (!is_valid_interval(skb, sch))
return qdisc_drop(skb, sch, to_free);
} else if (TXTIME_ASSIST_IS_ENABLED(q->flags)) {
skb->tstamp = get_packet_txtime(skb, sch);
if (!skb->tstamp)
return qdisc_drop(skb, sch, to_free);
}
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
/* Devices with full offload are expected to honor this in hardware */
tc = netdev_get_prio_tc_map(dev, prio);
if (skb->len > q->max_frm_len[tc])
return qdisc_drop(skb, sch, to_free);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
Revert "net: sched: Pass root lock to Qdisc_ops.enqueue" This reverts commit aebe4426ccaa4838f36ea805cdf7d76503e65117. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15 01:03:08 +08:00
return qdisc_enqueue(skb, child, to_free);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
net/sched: taprio: replace safety precautions with comments The WARN_ON_ONCE() checks introduced in commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping") take a small toll on performance, but otherwise, the conditions are never expected to happen. Replace them with comments, such that the information is still conveyed to developers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:46 +08:00
/* Will not be called in the full offload case, since the TX queues are
* attached to the Qdisc created using qdisc_create_dflt()
*/
taprio: Handle short intervals and large packets When using short intervals e.g. below one millisecond, large packets won't be transmitted at all. The software implementations checks whether the packet can be fit into the remaining interval. Therefore, it takes the packet length and the transmission speed into account. That is correct. However, for large packets it may be that the transmission time exceeds the interval resulting in no packet transmission. The same situation works fine with hardware offloading applied. The problem has been observed with the following schedule and iperf3: |tc qdisc replace dev lan1 parent root handle 100 taprio \ | num_tc 8 \ | map 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 \ | queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ | base-time $base \ | sched-entry S 0x40 500000 \ | sched-entry S 0xbf 500000 \ | clockid CLOCK_TAI \ | flags 0x00 [...] |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |[ 5] local 192.168.2.121 port 52610 connected to 192.168.2.105 port 5201 |[ ID] Interval Transfer Bitrate Retr Cwnd |[ 5] 0.00-1.00 sec 45.2 KBytes 370 Kbits/sec 0 1.41 KBytes |[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes After debugging, it seems that the packet length stored in the SKB is about 7000-8000 bytes. Using a 100 Mbit/s link the transmission time is about 600us which larger than the interval of 500us. Therefore, segment the SKB into smaller chunks if the packet is too big. This yields similar results than the hardware offload: |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |- - - - - - - - - - - - - - - - - - - - - - - - - |[ ID] Interval Transfer Bitrate Retr |[ 5] 0.00-10.00 sec 48.9 MBytes 41.0 Mbits/sec 0 sender |[ 5] 0.00-10.02 sec 48.7 MBytes 40.7 Mbits/sec receiver Furthermore, the segmentation can be skipped for the full offload case, as the driver or the hardware is expected to handle this. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 15:34:55 +08:00
static int taprio_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
struct taprio_sched *q = qdisc_priv(sch);
struct Qdisc *child;
int queue;
queue = skb_get_queue_mapping(skb);
child = q->qdiscs[queue];
if (unlikely(!child))
return qdisc_drop(skb, sch, to_free);
/* Large packets might not be transmitted when the transmission duration
* exceeds any configured interval. Therefore, segment the skb into
net/sched: taprio: remove redundant FULL_OFFLOAD_IS_ENABLED check in taprio_enqueue Since commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), __dev_queue_xmit() will select a txq->qdisc for the full offload case of taprio which isn't the root taprio qdisc, so qdisc enqueues will never pass through taprio_enqueue(). That commit already introduced one safety precaution check for FULL_OFFLOAD_IS_ENABLED(); a second one is really not needed, so simplify the conditional for entering into the GSO segmentation logic. Also reword the comment a little, to appear more natural after the code change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:43 +08:00
* smaller chunks. Drivers with full offload are expected to handle
* this in hardware.
taprio: Handle short intervals and large packets When using short intervals e.g. below one millisecond, large packets won't be transmitted at all. The software implementations checks whether the packet can be fit into the remaining interval. Therefore, it takes the packet length and the transmission speed into account. That is correct. However, for large packets it may be that the transmission time exceeds the interval resulting in no packet transmission. The same situation works fine with hardware offloading applied. The problem has been observed with the following schedule and iperf3: |tc qdisc replace dev lan1 parent root handle 100 taprio \ | num_tc 8 \ | map 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 \ | queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ | base-time $base \ | sched-entry S 0x40 500000 \ | sched-entry S 0xbf 500000 \ | clockid CLOCK_TAI \ | flags 0x00 [...] |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |[ 5] local 192.168.2.121 port 52610 connected to 192.168.2.105 port 5201 |[ ID] Interval Transfer Bitrate Retr Cwnd |[ 5] 0.00-1.00 sec 45.2 KBytes 370 Kbits/sec 0 1.41 KBytes |[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes After debugging, it seems that the packet length stored in the SKB is about 7000-8000 bytes. Using a 100 Mbit/s link the transmission time is about 600us which larger than the interval of 500us. Therefore, segment the SKB into smaller chunks if the packet is too big. This yields similar results than the hardware offload: |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |- - - - - - - - - - - - - - - - - - - - - - - - - |[ ID] Interval Transfer Bitrate Retr |[ 5] 0.00-10.00 sec 48.9 MBytes 41.0 Mbits/sec 0 sender |[ 5] 0.00-10.02 sec 48.7 MBytes 40.7 Mbits/sec receiver Furthermore, the segmentation can be skipped for the full offload case, as the driver or the hardware is expected to handle this. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 15:34:55 +08:00
*/
net/sched: taprio: remove redundant FULL_OFFLOAD_IS_ENABLED check in taprio_enqueue Since commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), __dev_queue_xmit() will select a txq->qdisc for the full offload case of taprio which isn't the root taprio qdisc, so qdisc enqueues will never pass through taprio_enqueue(). That commit already introduced one safety precaution check for FULL_OFFLOAD_IS_ENABLED(); a second one is really not needed, so simplify the conditional for entering into the GSO segmentation logic. Also reword the comment a little, to appear more natural after the code change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:43 +08:00
if (skb_is_gso(skb)) {
taprio: Handle short intervals and large packets When using short intervals e.g. below one millisecond, large packets won't be transmitted at all. The software implementations checks whether the packet can be fit into the remaining interval. Therefore, it takes the packet length and the transmission speed into account. That is correct. However, for large packets it may be that the transmission time exceeds the interval resulting in no packet transmission. The same situation works fine with hardware offloading applied. The problem has been observed with the following schedule and iperf3: |tc qdisc replace dev lan1 parent root handle 100 taprio \ | num_tc 8 \ | map 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 \ | queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ | base-time $base \ | sched-entry S 0x40 500000 \ | sched-entry S 0xbf 500000 \ | clockid CLOCK_TAI \ | flags 0x00 [...] |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |[ 5] local 192.168.2.121 port 52610 connected to 192.168.2.105 port 5201 |[ ID] Interval Transfer Bitrate Retr Cwnd |[ 5] 0.00-1.00 sec 45.2 KBytes 370 Kbits/sec 0 1.41 KBytes |[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes After debugging, it seems that the packet length stored in the SKB is about 7000-8000 bytes. Using a 100 Mbit/s link the transmission time is about 600us which larger than the interval of 500us. Therefore, segment the SKB into smaller chunks if the packet is too big. This yields similar results than the hardware offload: |root@tsn:~# iperf3 -c 192.168.2.105 |Connecting to host 192.168.2.105, port 5201 |- - - - - - - - - - - - - - - - - - - - - - - - - |[ ID] Interval Transfer Bitrate Retr |[ 5] 0.00-10.00 sec 48.9 MBytes 41.0 Mbits/sec 0 sender |[ 5] 0.00-10.02 sec 48.7 MBytes 40.7 Mbits/sec receiver Furthermore, the segmentation can be skipped for the full offload case, as the driver or the hardware is expected to handle this. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18 15:34:55 +08:00
unsigned int slen = 0, numsegs = 0, len = qdisc_pkt_len(skb);
netdev_features_t features = netif_skb_features(skb);
struct sk_buff *segs, *nskb;
int ret;
segs = skb_gso_segment(skb, features & ~NETIF_F_GSO_MASK);
if (IS_ERR_OR_NULL(segs))
return qdisc_drop(skb, sch, to_free);
skb_list_walk_safe(segs, segs, nskb) {
skb_mark_not_on_list(segs);
qdisc_skb_cb(segs)->pkt_len = segs->len;
slen += segs->len;
ret = taprio_enqueue_one(segs, sch, child, to_free);
if (ret != NET_XMIT_SUCCESS) {
if (net_xmit_drop_count(ret))
qdisc_qstats_drop(sch);
} else {
numsegs++;
}
}
if (numsegs > 1)
qdisc_tree_reduce_backlog(sch, 1 - numsegs, len - slen);
consume_skb(skb);
return numsegs > 0 ? NET_XMIT_SUCCESS : NET_XMIT_DROP;
}
return taprio_enqueue_one(skb, sch, child, to_free);
}
net/sched: taprio: replace safety precautions with comments The WARN_ON_ONCE() checks introduced in commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping") take a small toll on performance, but otherwise, the conditions are never expected to happen. Replace them with comments, such that the information is still conveyed to developers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:46 +08:00
/* Will not be called in the full offload case, since the TX queues are
* attached to the Qdisc created using qdisc_create_dflt()
*/
net/sched: taprio: stop going through private ops for dequeue and peek Since commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), taprio_dequeue_soft() and taprio_peek_soft() are de facto the only implementations for Qdisc_ops :: dequeue and Qdisc_ops :: peek that taprio provides. This is because in full offload mode, __dev_queue_xmit() will select a txq->qdisc which is never root taprio qdisc. So if nothing is enqueued in the root qdisc, it will never be run and nothing will get dequeued from it. Therefore, we can remove the private indirection from taprio, and always point Qdisc_ops :: dequeue to taprio_dequeue_soft (now simply named taprio_dequeue) and Qdisc_ops :: peek to taprio_peek_soft (now simply named taprio_peek). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:44 +08:00
static struct sk_buff *taprio_peek(struct Qdisc *sch)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct sched_entry *entry;
struct sk_buff *skb;
u32 gate_mask;
int i;
rcu_read_lock();
entry = rcu_dereference(q->current_entry);
net: sched: taprio: Fix taprio_peek() While traversing taprio's children qdisc list, if the gate is closed for a given traffic class, we should continue traversing the list since the remaining qdiscs may have skb ready for transmission. This patch also takes this opportunity and changes the function to use the TAPRIO_ALL_GATES_OPEN macro instead of the magic number '-1'. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:23 +08:00
gate_mask = entry ? entry->gate_mask : TAPRIO_ALL_GATES_OPEN;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
rcu_read_unlock();
if (!gate_mask)
return NULL;
for (i = 0; i < dev->num_tx_queues; i++) {
struct Qdisc *child = q->qdiscs[i];
int prio;
u8 tc;
if (unlikely(!child))
continue;
skb = child->ops->peek(child);
if (!skb)
continue;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (TXTIME_ASSIST_IS_ENABLED(q->flags))
return skb;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
prio = skb->priority;
tc = netdev_get_prio_tc_map(dev, prio);
if (!(gate_mask & BIT(tc)))
net: sched: taprio: Fix taprio_peek() While traversing taprio's children qdisc list, if the gate is closed for a given traffic class, we should continue traversing the list since the remaining qdiscs may have skb ready for transmission. This patch also takes this opportunity and changes the function to use the TAPRIO_ALL_GATES_OPEN macro instead of the magic number '-1'. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:23 +08:00
continue;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return skb;
}
return NULL;
}
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 04:51:57 +08:00
static void taprio_set_budget(struct taprio_sched *q, struct sched_entry *entry)
{
atomic_set(&entry->budget,
time64.h: consolidate uses of PSEC_PER_NSEC Time-sensitive networking code needs to work with PTP times expressed in nanoseconds, and with packet transmission times expressed in picoseconds, since those would be fractional at higher than gigabit speed when expressed in nanoseconds. Convert the existing uses in tc-taprio and the ocelot/felix DSA driver to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h because the vDSO library does not (yet) need/use it. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 22:52:38 +08:00
div64_u64((u64)entry->interval * PSEC_PER_NSEC,
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 04:51:57 +08:00
atomic64_read(&q->picos_per_byte)));
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
net/sched: taprio: replace safety precautions with comments The WARN_ON_ONCE() checks introduced in commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping") take a small toll on performance, but otherwise, the conditions are never expected to happen. Replace them with comments, such that the information is still conveyed to developers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:46 +08:00
/* Will not be called in the full offload case, since the TX queues are
* attached to the Qdisc created using qdisc_create_dflt()
*/
net/sched: taprio: stop going through private ops for dequeue and peek Since commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), taprio_dequeue_soft() and taprio_peek_soft() are de facto the only implementations for Qdisc_ops :: dequeue and Qdisc_ops :: peek that taprio provides. This is because in full offload mode, __dev_queue_xmit() will select a txq->qdisc which is never root taprio qdisc. So if nothing is enqueued in the root qdisc, it will never be run and nothing will get dequeued from it. Therefore, we can remove the private indirection from taprio, and always point Qdisc_ops :: dequeue to taprio_dequeue_soft (now simply named taprio_dequeue) and Qdisc_ops :: peek to taprio_peek_soft (now simply named taprio_peek). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:44 +08:00
static struct sk_buff *taprio_dequeue(struct Qdisc *sch)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:30 +08:00
struct sk_buff *skb = NULL;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct sched_entry *entry;
u32 gate_mask;
int i;
rcu_read_lock();
entry = rcu_dereference(q->current_entry);
/* if there's no entry, it means that the schedule didn't
* start yet, so force all gates to be open, this is in
* accordance to IEEE 802.1Qbv-2015 Section 8.6.9.4.5
net/sched: sch_taprio: fix typo in comment I have checked that the IEEE standard 802.1Q-2018 section 8.6.9.4.5 is called AdminGateStates. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01 21:16:53 +08:00
* "AdminGateStates"
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
*/
gate_mask = entry ? entry->gate_mask : TAPRIO_ALL_GATES_OPEN;
if (!gate_mask)
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:30 +08:00
goto done;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
for (i = 0; i < dev->num_tx_queues; i++) {
struct Qdisc *child = q->qdiscs[i];
ktime_t guard;
int prio;
int len;
u8 tc;
if (unlikely(!child))
continue;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (TXTIME_ASSIST_IS_ENABLED(q->flags)) {
skb = child->ops->dequeue(child);
if (!skb)
continue;
goto skb_found;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
skb = child->ops->peek(child);
if (!skb)
continue;
prio = skb->priority;
tc = netdev_get_prio_tc_map(dev, prio);
taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 01:39:53 +08:00
if (!(gate_mask & BIT(tc))) {
skb = NULL;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
continue;
taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 01:39:53 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
len = qdisc_pkt_len(skb);
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
guard = ktime_add_ns(taprio_get_time(q),
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
length_to_duration(q, len));
/* In the case that there's no gate entry, there's no
* guard band ...
*/
if (gate_mask != TAPRIO_ALL_GATES_OPEN &&
taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 01:39:53 +08:00
ktime_after(guard, entry->close_time)) {
skb = NULL;
net: sched: taprio: Fix taprio_dequeue() In case we don't have 'guard' or 'budget' to transmit the skb, we should continue traversing the qdisc list since the remaining guard/budget might be enough to transmit a skb from other children qdiscs. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:24 +08:00
continue;
taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 01:39:53 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
/* ... and no budget. */
if (gate_mask != TAPRIO_ALL_GATES_OPEN &&
taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 01:39:53 +08:00
atomic_sub_return(len, &entry->budget) < 0) {
skb = NULL;
net: sched: taprio: Fix taprio_dequeue() In case we don't have 'guard' or 'budget' to transmit the skb, we should continue traversing the qdisc list since the remaining guard/budget might be enough to transmit a skb from other children qdiscs. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:24 +08:00
continue;
taprio: Fix sending packets without dequeueing them There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 01:39:53 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
skb = child->ops->dequeue(child);
if (unlikely(!skb))
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:30 +08:00
goto done;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
skb_found:
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
qdisc_bstats_update(sch, skb);
qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:30 +08:00
goto done;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
taprio: Fix potencial use of invalid memory during dequeue() Right now, this isn't a problem, but the next commit allows schedules to be added during runtime. When a new schedule transitions from the inactive to the active state ("admin" -> "oper") the previous one can be freed, if it's freed just after the RCU read lock is released, we may access an invalid entry. So, we should take care to protect the dequeue() flow, so all the places that access the entries are protected by the RCU read lock. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:30 +08:00
done:
rcu_read_unlock();
return skb;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
static bool should_restart_cycle(const struct sched_gate_list *oper,
const struct sched_entry *entry)
{
if (list_is_last(&entry->list, &oper->entries))
return true;
if (ktime_compare(entry->close_time, oper->cycle_close_time) == 0)
return true;
return false;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static bool should_change_schedules(const struct sched_gate_list *admin,
const struct sched_gate_list *oper,
ktime_t close_time)
{
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:33 +08:00
ktime_t next_base_time, extension_time;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (!admin)
return false;
next_base_time = sched_base_time(admin);
/* This is the simple case, the close_time would fall after
* the next schedule base_time.
*/
if (ktime_compare(next_base_time, close_time) <= 0)
return true;
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:33 +08:00
/* This is the cycle_time_extension case, if the close_time
* plus the amount that can be extended would fall after the
* next schedule base_time, we can extend the current schedule
* for that amount.
*/
extension_time = ktime_add_ns(close_time, oper->cycle_time_extension);
/* FIXME: the IEEE 802.1Q-2018 Specification isn't clear about
* how precisely the extension should be made. So after
* conformance testing, this logic may change.
*/
if (ktime_compare(next_base_time, extension_time) <= 0)
return true;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
return false;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static enum hrtimer_restart advance_sched(struct hrtimer *timer)
{
struct taprio_sched *q = container_of(timer, struct taprio_sched,
advance_timer);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list *oper, *admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct sched_entry *entry, *next;
struct Qdisc *sch = q->root;
ktime_t close_time;
spin_lock(&q->current_entry_lock);
entry = rcu_dereference_protected(q->current_entry,
lockdep_is_held(&q->current_entry_lock));
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
oper = rcu_dereference_protected(q->oper_sched,
lockdep_is_held(&q->current_entry_lock));
admin = rcu_dereference_protected(q->admin_sched,
lockdep_is_held(&q->current_entry_lock));
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (!oper)
switch_schedules(q, &admin, &oper);
/* This can happen in two cases: 1. this is the very first run
* of this function (i.e. we weren't running any schedule
* previously); 2. The previous schedule just ended. The first
* entry of all schedules are pre-calculated during the
* schedule initialization.
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
*/
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (unlikely(!entry || entry->close_time == oper->base_time)) {
next = list_first_entry(&oper->entries, struct sched_entry,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
list);
close_time = next->close_time;
goto first_run;
}
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
if (should_restart_cycle(oper, entry)) {
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
next = list_first_entry(&oper->entries, struct sched_entry,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
list);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
oper->cycle_close_time = ktime_add_ns(oper->cycle_close_time,
oper->cycle_time);
} else {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
next = list_next_entry(entry, list);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
close_time = ktime_add_ns(entry->close_time, next->interval);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
close_time = min_t(ktime_t, close_time, oper->cycle_close_time);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (should_change_schedules(admin, oper, close_time)) {
/* Set things so the next time this runs, the new
* schedule runs.
*/
close_time = sched_base_time(admin);
switch_schedules(q, &admin, &oper);
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
next->close_time = close_time;
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 04:51:57 +08:00
taprio_set_budget(q, next);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
first_run:
rcu_assign_pointer(q->current_entry, next);
spin_unlock(&q->current_entry_lock);
hrtimer_set_expires(&q->advance_timer, close_time);
rcu_read_lock();
__netif_schedule(sch);
rcu_read_unlock();
return HRTIMER_RESTART;
}
static const struct nla_policy entry_policy[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = {
[TCA_TAPRIO_SCHED_ENTRY_INDEX] = { .type = NLA_U32 },
[TCA_TAPRIO_SCHED_ENTRY_CMD] = { .type = NLA_U8 },
[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK] = { .type = NLA_U32 },
[TCA_TAPRIO_SCHED_ENTRY_INTERVAL] = { .type = NLA_U32 },
};
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
static const struct nla_policy taprio_tc_policy[TCA_TAPRIO_TC_ENTRY_MAX + 1] = {
[TCA_TAPRIO_TC_ENTRY_INDEX] = { .type = NLA_U32 },
[TCA_TAPRIO_TC_ENTRY_MAX_SDU] = { .type = NLA_U32 },
};
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static const struct nla_policy taprio_policy[TCA_TAPRIO_ATTR_MAX + 1] = {
[TCA_TAPRIO_ATTR_PRIOMAP] = {
.len = sizeof(struct tc_mqprio_qopt)
},
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:33 +08:00
[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] = { .type = NLA_NESTED },
[TCA_TAPRIO_ATTR_SCHED_BASE_TIME] = { .type = NLA_S64 },
[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY] = { .type = NLA_NESTED },
[TCA_TAPRIO_ATTR_SCHED_CLOCKID] = { .type = NLA_S32 },
[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME] = { .type = NLA_S64 },
[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION] = { .type = NLA_S64 },
taprio: Add missing policy validation for flags netlink policy validation for the 'flags' argument was missing. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:08 +08:00
[TCA_TAPRIO_ATTR_FLAGS] = { .type = NLA_U32 },
net: taprio: add missing attribute validation for txtime delay Add missing attribute validation for TCA_TAPRIO_ATTR_TXTIME_DELAY to the netlink policy. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 13:05:20 +08:00
[TCA_TAPRIO_ATTR_TXTIME_DELAY] = { .type = NLA_U32 },
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
[TCA_TAPRIO_ATTR_TC_ENTRY] = { .type = NLA_NESTED },
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
};
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
static int fill_sched_entry(struct taprio_sched *q, struct nlattr **tb,
struct sched_entry *entry,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct netlink_ext_ack *extack)
{
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
int min_duration = length_to_duration(q, ETH_ZLEN);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
u32 interval = 0;
if (tb[TCA_TAPRIO_SCHED_ENTRY_CMD])
entry->command = nla_get_u8(
tb[TCA_TAPRIO_SCHED_ENTRY_CMD]);
if (tb[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK])
entry->gate_mask = nla_get_u32(
tb[TCA_TAPRIO_SCHED_ENTRY_GATE_MASK]);
if (tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL])
interval = nla_get_u32(
tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL]);
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
/* The interval should allow at least the minimum ethernet
* frame to go out.
*/
if (interval < min_duration) {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
NL_SET_ERR_MSG(extack, "Invalid interval for schedule entry");
return -EINVAL;
}
entry->interval = interval;
return 0;
}
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
static int parse_sched_entry(struct taprio_sched *q, struct nlattr *n,
struct sched_entry *entry, int index,
struct netlink_ext_ack *extack)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
struct nlattr *tb[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = { };
int err;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 20:07:28 +08:00
err = nla_parse_nested_deprecated(tb, TCA_TAPRIO_SCHED_ENTRY_MAX, n,
entry_policy, NULL);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (err < 0) {
NL_SET_ERR_MSG(extack, "Could not parse nested entry");
return -EINVAL;
}
entry->index = index;
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
return fill_sched_entry(q, tb, entry, extack);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
static int parse_sched_list(struct taprio_sched *q, struct nlattr *list,
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list *sched,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct netlink_ext_ack *extack)
{
struct nlattr *n;
int err, rem;
int i = 0;
if (!list)
return -EINVAL;
nla_for_each_nested(n, list, rem) {
struct sched_entry *entry;
if (nla_type(n) != TCA_TAPRIO_SCHED_ENTRY) {
NL_SET_ERR_MSG(extack, "Attribute is not of type 'entry'");
continue;
}
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry) {
NL_SET_ERR_MSG(extack, "Not enough memory for entry");
return -ENOMEM;
}
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
err = parse_sched_entry(q, n, entry, i, extack);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (err < 0) {
kfree(entry);
return err;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
list_add_tail(&entry->list, &sched->entries);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
i++;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
sched->num_entries = i;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return i;
}
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
static int parse_taprio_schedule(struct taprio_sched *q, struct nlattr **tb,
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list *new,
struct netlink_ext_ack *extack)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
int err = 0;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (tb[TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY]) {
NL_SET_ERR_MSG(extack, "Adding a single entry is not supported");
return -ENOTSUPP;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (tb[TCA_TAPRIO_ATTR_SCHED_BASE_TIME])
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
new->base_time = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_BASE_TIME]);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:33 +08:00
if (tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION])
new->cycle_time_extension = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION]);
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
if (tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME])
new->cycle_time = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME]);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST])
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
err = parse_sched_list(q, tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST],
new, extack);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (err < 0)
return err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:15 +08:00
if (!new->cycle_time) {
struct sched_entry *entry;
ktime_t cycle = 0;
list_for_each_entry(entry, &new->entries, list)
cycle = ktime_add_ns(cycle, entry->interval);
net: sched: tapr: prevent cycle_time == 0 in parse_taprio_schedule There is a reproducible sequence from the userland that will trigger a WARN_ON() condition in taprio_get_start_time, which causes kernel to panic if configured as "panic_on_warn". Catch this condition in parse_taprio_schedule to prevent this condition. Reported as bug on syzkaller: https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c Reported-by: syzbot+d50710fd0873a9c6b40c@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17 07:30:46 +08:00
if (!cycle) {
NL_SET_ERR_MSG(extack, "'cycle_time' can never be 0");
return -EINVAL;
}
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:15 +08:00
new->cycle_time = cycle;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
return 0;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
static int taprio_parse_mqprio_opt(struct net_device *dev,
struct tc_mqprio_qopt *qopt,
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
struct netlink_ext_ack *extack,
u32 taprio_flags)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
int i, j;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (!qopt && !dev->num_tc) {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
NL_SET_ERR_MSG(extack, "'mqprio' configuration is necessary");
return -EINVAL;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
/* If num_tc is already set, it means that the user already
* configured the mqprio part
*/
if (dev->num_tc)
return 0;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
/* Verify num_tc is not out of max range */
if (qopt->num_tc > TC_MAX_QUEUE) {
NL_SET_ERR_MSG(extack, "Number of traffic classes is outside valid range");
return -EINVAL;
}
/* taprio imposes that traffic classes map 1:n to tx queues */
if (qopt->num_tc > dev->num_tx_queues) {
NL_SET_ERR_MSG(extack, "Number of traffic classes is greater than number of HW queues");
return -EINVAL;
}
/* Verify priority mapping uses valid tcs */
taprio: don't reject same mqprio settings The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 08:23:12 +08:00
for (i = 0; i <= TC_BITMASK; i++) {
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (qopt->prio_tc_map[i] >= qopt->num_tc) {
NL_SET_ERR_MSG(extack, "Invalid traffic class in priority to traffic class mapping");
return -EINVAL;
}
}
for (i = 0; i < qopt->num_tc; i++) {
unsigned int last = qopt->offset[i] + qopt->count[i];
/* Verify the queue count is in tx range being equal to the
* real_num_tx_queues indicates the last queue is in use.
*/
if (qopt->offset[i] >= dev->num_tx_queues ||
!qopt->count[i] ||
last > dev->real_num_tx_queues) {
NL_SET_ERR_MSG(extack, "Invalid queue in traffic class to queue mapping");
return -EINVAL;
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (TXTIME_ASSIST_IS_ENABLED(taprio_flags))
continue;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
/* Verify that the offset and counts do not overlap */
for (j = i + 1; j < qopt->num_tc; j++) {
if (last > qopt->offset[j]) {
NL_SET_ERR_MSG(extack, "Detected overlap in the traffic class to queue mapping");
return -EINVAL;
}
}
}
return 0;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static int taprio_get_start_time(struct Qdisc *sch,
struct sched_gate_list *sched,
ktime_t *start)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
struct taprio_sched *q = qdisc_priv(sch);
ktime_t now, base, cycle;
s64 n;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
base = sched_base_time(sched);
taprio: make clock reference conversions easier Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:18 +08:00
now = taprio_get_time(q);
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:21 +08:00
if (ktime_after(base, now)) {
*start = base;
return 0;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:15 +08:00
cycle = sched->cycle_time;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:21 +08:00
/* The qdisc is expected to have at least one sched_entry. Moreover,
* any entry must have 'interval' > 0. Thus if the cycle time is zero,
* something went really wrong. In that case, we should warn about this
* inconsistent state and return error.
*/
if (WARN_ON(!cycle))
return -EFAULT;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
/* Schedule the start time for the beginning of the next
* cycle.
*/
n = div64_s64(ktime_sub_ns(now, base), cycle);
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:21 +08:00
*start = ktime_add_ns(base, (n + 1) * cycle);
return 0;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static void setup_first_close_time(struct taprio_sched *q,
struct sched_gate_list *sched, ktime_t base)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
{
struct sched_entry *first;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
ktime_t cycle;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
first = list_first_entry(&sched->entries,
struct sched_entry, list);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: calculate cycle_time when schedule is installed cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:15 +08:00
cycle = sched->cycle_time;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
/* FIXME: find a better place to do this */
sched->cycle_close_time = ktime_add_ns(base, cycle);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
first->close_time = ktime_add_ns(base, first->interval);
net/sched: taprio: fix build without 64bit div Recent changes to taprio did not use the correct div64 helpers, leading to: net/sched/sch_taprio.o: In function `taprio_dequeue': sch_taprio.c:(.text+0x34a): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `advance_sched': sch_taprio.c:(.text+0xa0b): undefined reference to `__divdi3' net/sched/sch_taprio.o: In function `taprio_init': sch_taprio.c:(.text+0x1450): undefined reference to `__divdi3' /home/jkicinski/devel/linux/Makefile:1032: recipe for target 'vmlinux' failed Use math64 helpers. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 04:51:57 +08:00
taprio_set_budget(q, first);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
rcu_assign_pointer(q->current_entry, NULL);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static void taprio_start_sched(struct Qdisc *sch,
ktime_t start, struct sched_gate_list *new)
{
struct taprio_sched *q = qdisc_priv(sch);
ktime_t expires;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
if (FULL_OFFLOAD_IS_ENABLED(q->flags))
return;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
expires = hrtimer_get_expires(&q->advance_timer);
if (expires == 0)
expires = KTIME_MAX;
/* If the new schedule starts before the next expiration, we
* reprogram it to the earliest one, so we change the admin
* schedule to the operational one at the right time.
*/
start = min_t(ktime_t, start, expires);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
hrtimer_start(&q->advance_timer, start, HRTIMER_MODE_ABS);
}
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
static void taprio_set_picos_per_byte(struct net_device *dev,
struct taprio_sched *q)
{
struct ethtool_link_ksettings ecmd;
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 09:07:22 +08:00
int speed = SPEED_10;
int picos_per_byte;
int err;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 09:07:22 +08:00
err = __ethtool_get_link_ksettings(dev, &ecmd);
if (err < 0)
goto skip;
net: sched: taprio: Avoid division by zero on invalid link speed The check in taprio_set_picos_per_byte is currently not robust enough and will trigger this division by zero, due to e.g. PHYLINK not setting kset->base.speed when there is no PHY connected: [ 27.109992] Division by zero in kernel. [ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212 [ 27.121974] Hardware name: Freescale LS1021A [ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14) [ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4) [ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18) [ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0) [ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68) [ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4) [ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec) [ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4) [ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8) [ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc) [ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114) [ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c) [ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340) [ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24) [ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228) [ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c) [ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0) [ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000 [ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c [ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64 Russell King points out that the ethtool API says zero is a valid return value of __ethtool_get_link_ksettings: * If it is enabled then they are read-only; if the link * is up they represent the negotiated link mode; if the link is down, * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. So, it seems that taprio is not following the API... I'd suggest either fixing taprio, or getting agreement to change the ethtool API. The chosen path was to fix taprio. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-29 07:37:22 +08:00
if (ecmd.base.speed && ecmd.base.speed != SPEED_UNKNOWN)
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 09:07:22 +08:00
speed = ecmd.base.speed;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 09:07:22 +08:00
skip:
net: sched: taprio: Fix potential integer overflow in taprio_set_picos_per_byte The speed divisor is used in a context expecting an s64, but it is evaluated using 32-bit arithmetic. To avoid that happening, instead of multiplying by 1,000,000 in the first place, simplify the fraction and do a standard 32 bit division instead. Fixes: f04b514c0ce2 ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte") Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-29 07:01:39 +08:00
picos_per_byte = (USEC_PER_SEC * 8) / speed;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
atomic64_set(&q->picos_per_byte, picos_per_byte);
netdev_dbg(dev, "taprio: set %s's picos_per_byte to: %lld, linkspeed: %d\n",
dev->name, (long long)atomic64_read(&q->picos_per_byte),
ecmd.base.speed);
}
static int taprio_dev_notifier(struct notifier_block *nb, unsigned long event,
void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct taprio_sched *q;
ASSERT_RTNL();
if (event != NETDEV_UP && event != NETDEV_CHANGE)
return NOTIFY_DONE;
list_for_each_entry(q, &taprio_list, taprio_list) {
net/sched: taprio: simplify list iteration in taprio_dev_notifier() taprio_dev_notifier() subscribes to netdev state changes in order to determine whether interfaces which have a taprio root qdisc have changed their link speed, so the internal calculations can be adapted properly. The 'qdev' temporary variable serves no purpose, because we just use it only once, and can just as well use qdisc_dev(q->root) directly (or the "dev" that comes from the netdev notifier; this is because qdev is only interesting if it was the subject of the state change, _and_ its root qdisc belongs in the taprio list). The 'found' variable also doesn't really serve too much of a purpose either; we can just call taprio_set_picos_per_byte() within the loop, and exit immediately afterwards. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23 22:59:21 +08:00
if (dev != qdisc_dev(q->root))
continue;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
taprio_set_picos_per_byte(dev, q);
net/sched: taprio: simplify list iteration in taprio_dev_notifier() taprio_dev_notifier() subscribes to netdev state changes in order to determine whether interfaces which have a taprio root qdisc have changed their link speed, so the internal calculations can be adapted properly. The 'qdev' temporary variable serves no purpose, because we just use it only once, and can just as well use qdisc_dev(q->root) directly (or the "dev" that comes from the netdev notifier; this is because qdev is only interesting if it was the subject of the state change, _and_ its root qdisc belongs in the taprio list). The 'found' variable also doesn't really serve too much of a purpose either; we can just call taprio_set_picos_per_byte() within the loop, and exit immediately afterwards. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23 22:59:21 +08:00
break;
}
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
return NOTIFY_DONE;
}
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
static void setup_txtime(struct taprio_sched *q,
struct sched_gate_list *sched, ktime_t base)
{
struct sched_entry *entry;
u32 interval = 0;
list_for_each_entry(entry, &sched->entries, list) {
entry->next_txtime = ktime_add_ns(base, interval);
interval += entry->interval;
}
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
static struct tc_taprio_qopt_offload *taprio_offload_alloc(int num_entries)
{
struct __tc_taprio_qopt_offload *__offload;
taprio: Use struct_size() in kzalloc() Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, remove unnecessary variable _size_. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18 22:46:48 +08:00
__offload = kzalloc(struct_size(__offload, offload.entries, num_entries),
GFP_KERNEL);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
if (!__offload)
return NULL;
refcount_set(&__offload->users, 1);
return &__offload->offload;
}
struct tc_taprio_qopt_offload *taprio_offload_get(struct tc_taprio_qopt_offload
*offload)
{
struct __tc_taprio_qopt_offload *__offload;
__offload = container_of(offload, struct __tc_taprio_qopt_offload,
offload);
refcount_inc(&__offload->users);
return offload;
}
EXPORT_SYMBOL_GPL(taprio_offload_get);
void taprio_offload_free(struct tc_taprio_qopt_offload *offload)
{
struct __tc_taprio_qopt_offload *__offload;
__offload = container_of(offload, struct __tc_taprio_qopt_offload,
offload);
if (!refcount_dec_and_test(&__offload->users))
return;
kfree(__offload);
}
EXPORT_SYMBOL_GPL(taprio_offload_free);
/* The function will only serve to keep the pointers to the "oper" and "admin"
* schedules valid in relation to their base times, so when calling dump() the
* users looks at the right schedules.
* When using full offload, the admin configuration is promoted to oper at the
* base_time in the PHC time domain. But because the system time is not
* necessarily in sync with that, we can't just trigger a hrtimer to call
* switch_schedules at the right hardware time.
* At the moment we call this by hand right away from taprio, but in the future
* it will be useful to create a mechanism for drivers to notify taprio of the
* offload state (PENDING, ACTIVE, INACTIVE) so it can be visible in dump().
* This is left as TODO.
*/
net: sched: taprio: fix -Wmissing-prototypes warnings We get one warnings when build kernel W=1: net/sched/sch_taprio.c:1155:6: warning: no previous prototype for ‘taprio_offload_config_changed’ [-Wmissing-prototypes] Make the function static to fix this. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22 07:57:42 +08:00
static void taprio_offload_config_changed(struct taprio_sched *q)
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
{
struct sched_gate_list *oper, *admin;
net/sched: taprio: taprio_offload_config_changed() is protected by rtnl_mutex The locking in taprio_offload_config_changed() is wrong (but also inconsequentially so). The current_entry_lock does not serialize changes to the admin and oper schedules, only to the current entry. In fact, the rtnl_mutex does that, and that is taken at the time when taprio_change() is called. Replace the rcu_dereference_protected() method with the proper RCU annotation, and drop the unnecessary spin lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:40 +08:00
oper = rtnl_dereference(q->oper_sched);
admin = rtnl_dereference(q->admin_sched);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
switch_schedules(q, &admin, &oper);
}
taprio: Fix using wrong queues in gate mask Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26 01:44:04 +08:00
static u32 tc_map_to_queue_mask(struct net_device *dev, u32 tc_mask)
{
u32 i, queue_mask = 0;
for (i = 0; i < dev->num_tc; i++) {
u32 offset, count;
if (!(tc_mask & BIT(i)))
continue;
offset = dev->tc_to_txq[i].offset;
count = dev->tc_to_txq[i].count;
queue_mask |= GENMASK(offset + count - 1, offset);
}
return queue_mask;
}
static void taprio_sched_to_offload(struct net_device *dev,
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
struct sched_gate_list *sched,
struct tc_taprio_qopt_offload *offload)
{
struct sched_entry *entry;
int i = 0;
offload->base_time = sched->base_time;
offload->cycle_time = sched->cycle_time;
offload->cycle_time_extension = sched->cycle_time_extension;
list_for_each_entry(entry, &sched->entries, list) {
struct tc_taprio_sched_entry *e = &offload->entries[i];
e->command = entry->command;
e->interval = entry->interval;
taprio: Fix using wrong queues in gate mask Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26 01:44:04 +08:00
e->gate_mask = tc_map_to_queue_mask(dev, entry->gate_mask);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
i++;
}
offload->num_entries = i;
}
static int taprio_enable_offload(struct net_device *dev,
struct taprio_sched *q,
struct sched_gate_list *sched,
struct netlink_ext_ack *extack)
{
const struct net_device_ops *ops = dev->netdev_ops;
struct tc_taprio_qopt_offload *offload;
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
struct tc_taprio_caps caps;
int tc, err = 0;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
if (!ops->ndo_setup_tc) {
NL_SET_ERR_MSG(extack,
"Device does not support taprio offload");
return -EOPNOTSUPP;
}
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
qdisc_offload_query_caps(dev, TC_SETUP_QDISC_TAPRIO,
&caps, sizeof(caps));
if (!caps.supports_queue_max_sdu) {
for (tc = 0; tc < TC_MAX_QUEUE; tc++) {
if (q->max_sdu[tc]) {
NL_SET_ERR_MSG_MOD(extack,
"Device does not handle queueMaxSDU");
return -EOPNOTSUPP;
}
}
}
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
offload = taprio_offload_alloc(sched->num_entries);
if (!offload) {
NL_SET_ERR_MSG(extack,
"Not enough memory for enabling offload mode");
return -ENOMEM;
}
offload->enable = 1;
taprio: Fix using wrong queues in gate mask Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26 01:44:04 +08:00
taprio_sched_to_offload(dev, sched, offload);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
for (tc = 0; tc < TC_MAX_QUEUE; tc++)
offload->max_sdu[tc] = q->max_sdu[tc];
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
err = ops->ndo_setup_tc(dev, TC_SETUP_QDISC_TAPRIO, offload);
if (err < 0) {
NL_SET_ERR_MSG(extack,
"Device failed to setup taprio offload");
goto done;
}
net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:08:01 +08:00
q->offloaded = true;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
done:
taprio_offload_free(offload);
return err;
}
static int taprio_disable_offload(struct net_device *dev,
struct taprio_sched *q,
struct netlink_ext_ack *extack)
{
const struct net_device_ops *ops = dev->netdev_ops;
struct tc_taprio_qopt_offload *offload;
int err;
net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:08:01 +08:00
if (!q->offloaded)
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
return 0;
offload = taprio_offload_alloc(0);
if (!offload) {
NL_SET_ERR_MSG(extack,
"Not enough memory to disable offload mode");
return -ENOMEM;
}
offload->enable = 0;
err = ops->ndo_setup_tc(dev, TC_SETUP_QDISC_TAPRIO, offload);
if (err < 0) {
NL_SET_ERR_MSG(extack,
"Device failed to disable offload");
goto out;
}
net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:08:01 +08:00
q->offloaded = false;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
out:
taprio_offload_free(offload);
return err;
}
/* If full offload is enabled, the only possible clockid is the net device's
* PHC. For that reason, specifying a clockid through netlink is incorrect.
* For txtime-assist, it is implicitly assumed that the device's PHC is kept
* in sync with the specified clockid via a user space daemon such as phc2sys.
* For both software taprio and txtime-assist, the clockid is used for the
* hrtimer that advances the schedule and hence mandatory.
*/
static int taprio_parse_clockid(struct Qdisc *sch, struct nlattr **tb,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
int err = -EINVAL;
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
const struct ethtool_ops *ops = dev->ethtool_ops;
struct ethtool_ts_info info = {
.cmd = ETHTOOL_GET_TS_INFO,
.phc_index = -1,
};
if (tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]) {
NL_SET_ERR_MSG(extack,
"The 'clockid' cannot be specified for full offload");
goto out;
}
if (ops && ops->get_ts_info)
err = ops->get_ts_info(dev, &info);
if (err || info.phc_index < 0) {
NL_SET_ERR_MSG(extack,
"Device does not have a PTP clock");
err = -ENOTSUPP;
goto out;
}
} else if (tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]) {
int clockid = nla_get_s32(tb[TCA_TAPRIO_ATTR_SCHED_CLOCKID]);
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
enum tk_offsets tk_offset;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
/* We only support static clockids and we don't allow
* for it to be modified after the first init.
*/
if (clockid < 0 ||
(q->clockid != -1 && q->clockid != clockid)) {
NL_SET_ERR_MSG(extack,
"Changing the 'clockid' of a running schedule is not supported");
err = -ENOTSUPP;
goto out;
}
switch (clockid) {
case CLOCK_REALTIME:
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
tk_offset = TK_OFFS_REAL;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
break;
case CLOCK_MONOTONIC:
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
tk_offset = TK_OFFS_MAX;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
break;
case CLOCK_BOOTTIME:
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
tk_offset = TK_OFFS_BOOT;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
break;
case CLOCK_TAI:
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
tk_offset = TK_OFFS_TAI;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
break;
default:
NL_SET_ERR_MSG(extack, "Invalid 'clockid'");
err = -EINVAL;
goto out;
}
net/sched: sch_taprio: fix undefined behavior in ktime_mono_to_any 1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls ktime_mono_to_any() with out-of-bound value. 2) if q->tk_offset is changed in taprio_parse_clockid(), taprio_get_time() might also call ktime_mono_to_any() with out-of-bound value as sysbot found: UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27 index 3 is out of range for type 'ktime_t *[3]' CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908 get_tcp_tstamp net/sched/sch_taprio.c:322 [inline] get_packet_txtime net/sched/sch_taprio.c:353 [inline] taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420 taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785 __dev_xmit_skb net/core/dev.c:3869 [inline] __dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194 batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 02:08:15 +08:00
/* This pairs with READ_ONCE() in taprio_mono_to_any */
WRITE_ONCE(q->tk_offset, tk_offset);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
q->clockid = clockid;
} else {
NL_SET_ERR_MSG(extack, "Specifying a 'clockid' is mandatory");
goto out;
}
net: taprio: Fix returning EINVAL when configuring without flags When configuring a taprio instance if "flags" is not specified (or it's zero), taprio currently replies with an "Invalid argument" error. So, set the return value to zero after we are done with all the checks. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09 07:20:07 +08:00
/* Everything went ok, return success. */
err = 0;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
out:
return err;
}
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
static int taprio_parse_tc_entry(struct Qdisc *sch,
struct nlattr *opt,
u32 max_sdu[TC_QOPT_MAX_QUEUE],
unsigned long *seen_tcs,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[TCA_TAPRIO_TC_ENTRY_MAX + 1] = { };
struct net_device *dev = qdisc_dev(sch);
u32 val = 0;
int err, tc;
err = nla_parse_nested(tb, TCA_TAPRIO_TC_ENTRY_MAX, opt,
taprio_tc_policy, extack);
if (err < 0)
return err;
if (!tb[TCA_TAPRIO_TC_ENTRY_INDEX]) {
NL_SET_ERR_MSG_MOD(extack, "TC entry index missing");
return -EINVAL;
}
tc = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_INDEX]);
if (tc >= TC_QOPT_MAX_QUEUE) {
NL_SET_ERR_MSG_MOD(extack, "TC entry index out of range");
return -ERANGE;
}
if (*seen_tcs & BIT(tc)) {
NL_SET_ERR_MSG_MOD(extack, "Duplicate TC entry");
return -EINVAL;
}
*seen_tcs |= BIT(tc);
if (tb[TCA_TAPRIO_TC_ENTRY_MAX_SDU])
val = nla_get_u32(tb[TCA_TAPRIO_TC_ENTRY_MAX_SDU]);
if (val > dev->max_mtu) {
NL_SET_ERR_MSG_MOD(extack, "TC max SDU exceeds device max MTU");
return -ERANGE;
}
max_sdu[tc] = val;
return 0;
}
static int taprio_parse_tc_entries(struct Qdisc *sch,
struct nlattr *opt,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
u32 max_sdu[TC_QOPT_MAX_QUEUE];
unsigned long seen_tcs = 0;
struct nlattr *n;
int tc, rem;
int err = 0;
for (tc = 0; tc < TC_QOPT_MAX_QUEUE; tc++)
max_sdu[tc] = q->max_sdu[tc];
nla_for_each_nested(n, opt, rem) {
if (nla_type(n) != TCA_TAPRIO_ATTR_TC_ENTRY)
continue;
err = taprio_parse_tc_entry(sch, n, max_sdu, &seen_tcs, extack);
if (err)
goto out;
}
for (tc = 0; tc < TC_QOPT_MAX_QUEUE; tc++) {
q->max_sdu[tc] = max_sdu[tc];
if (max_sdu[tc])
q->max_frm_len[tc] = max_sdu[tc] + dev->hard_header_len;
else
q->max_frm_len[tc] = U32_MAX; /* never oversized */
}
out:
return err;
}
taprio: don't reject same mqprio settings The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 08:23:12 +08:00
static int taprio_mqprio_cmp(const struct net_device *dev,
const struct tc_mqprio_qopt *mqprio)
{
int i;
if (!mqprio || mqprio->num_tc != dev->num_tc)
return -1;
for (i = 0; i < mqprio->num_tc; i++)
if (dev->tc_to_txq[i].count != mqprio->count[i] ||
dev->tc_to_txq[i].offset != mqprio->offset[i])
return -1;
for (i = 0; i <= TC_BITMASK; i++)
if (dev->prio_tc_map[i] != mqprio->prio_tc_map[i])
return -1;
return 0;
}
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
/* The semantics of the 'flags' argument in relation to 'change()'
* requests, are interpreted following two rules (which are applied in
* this order): (1) an omitted 'flags' argument is interpreted as
* zero; (2) the 'flags' of a "running" taprio instance cannot be
* changed.
*/
static int taprio_new_flags(const struct nlattr *attr, u32 old,
struct netlink_ext_ack *extack)
{
u32 new = 0;
if (attr)
new = nla_get_u32(attr);
if (old != TAPRIO_FLAGS_INVALID && old != new) {
NL_SET_ERR_MSG_MOD(extack, "Changing 'flags' of a running schedule is not supported");
return -EOPNOTSUPP;
}
if (!taprio_flags_valid(new)) {
NL_SET_ERR_MSG_MOD(extack, "Specified 'flags' are not valid");
return -EINVAL;
}
return new;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[TCA_TAPRIO_ATTR_MAX + 1] = { };
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list *oper, *admin, *new_admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct tc_mqprio_qopt *mqprio = NULL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
unsigned long flags;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
ktime_t start;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
int i, err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 20:07:28 +08:00
err = nla_parse_nested_deprecated(tb, TCA_TAPRIO_ATTR_MAX, opt,
taprio_policy, extack);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (err < 0)
return err;
if (tb[TCA_TAPRIO_ATTR_PRIOMAP])
mqprio = nla_data(tb[TCA_TAPRIO_ATTR_PRIOMAP]);
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
err = taprio_new_flags(tb[TCA_TAPRIO_ATTR_FLAGS],
q->flags, extack);
if (err < 0)
return err;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
q->flags = err;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
err = taprio_parse_mqprio_opt(dev, mqprio, extack, q->flags);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (err < 0)
return err;
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
err = taprio_parse_tc_entries(sch, opt, extack);
if (err)
return err;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
new_admin = kzalloc(sizeof(*new_admin), GFP_KERNEL);
if (!new_admin) {
NL_SET_ERR_MSG(extack, "Not enough memory for a new schedule");
return -ENOMEM;
}
INIT_LIST_HEAD(&new_admin->entries);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
net/sched: taprio: taprio_dump and taprio_change are protected by rtnl_mutex Since the writer-side lock is taken here, we do not need to open an RCU read-side critical section, instead we can use rtnl_dereference() to tell lockdep we are serialized with concurrent writes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:41 +08:00
oper = rtnl_dereference(q->oper_sched);
admin = rtnl_dereference(q->admin_sched);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: don't reject same mqprio settings The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 08:23:12 +08:00
/* no changes - no new mqprio settings */
if (!taprio_mqprio_cmp(dev, mqprio))
mqprio = NULL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (mqprio && (oper || admin)) {
NL_SET_ERR_MSG(extack, "Changing the traffic mapping of a running schedule is not supported");
err = -ENOTSUPP;
goto free_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
taprio: Fix allowing too small intervals It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 08:03:11 +08:00
err = parse_taprio_schedule(q, tb, new_admin, extack);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (err < 0)
goto free_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (new_admin->num_entries == 0) {
NL_SET_ERR_MSG(extack, "There should be at least one entry in the schedule");
err = -EINVAL;
goto free_sched;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
err = taprio_parse_clockid(sch, tb, extack);
if (err < 0)
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
goto free_sched;
taprio_set_picos_per_byte(dev, q);
taprio: Fix enabling offload with wrong number of traffic classes If the driver implementing taprio offloading depends on the value of the network device number of traffic classes (dev->num_tc) for whatever reason, it was going to receive the value zero. The value was only set after the offloading function is called. So, moving setting the number of traffic classes to before the offloading function is called fixes this issue. This is safe because this only happens when taprio is instantiated (we don't allow this configuration to be changed without first removing taprio). Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Reported-by: Po Liu <po.liu@nxp.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:06 +08:00
if (mqprio) {
fix array-index-out-of-bounds in taprio_change syzbot report an array-index-out-of-bounds in taprio_change index 16 is out of range for type '__u16 [16]' that's because mqprio->num_tc is lager than TC_MAX_QUEUE,so we check the return value of netdev_set_num_tc. Reported-by: syzbot+2b3e5fb6c7ef285a94f6@syzkaller.appspotmail.com Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30 11:47:01 +08:00
err = netdev_set_num_tc(dev, mqprio->num_tc);
if (err)
goto free_sched;
taprio: Fix enabling offload with wrong number of traffic classes If the driver implementing taprio offloading depends on the value of the network device number of traffic classes (dev->num_tc) for whatever reason, it was going to receive the value zero. The value was only set after the offloading function is called. So, moving setting the number of traffic classes to before the offloading function is called fixes this issue. This is safe because this only happens when taprio is instantiated (we don't allow this configuration to be changed without first removing taprio). Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Reported-by: Po Liu <po.liu@nxp.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:06 +08:00
for (i = 0; i < mqprio->num_tc; i++)
netdev_set_tc_queue(dev, i,
mqprio->count[i],
mqprio->offset[i]);
/* Always use supplied priority mappings */
for (i = 0; i <= TC_BITMASK; i++)
netdev_set_prio_tc_map(dev, i,
mqprio->prio_tc_map[i]);
}
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
if (FULL_OFFLOAD_IS_ENABLED(q->flags))
taprio: Fix using wrong queues in gate mask Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26 01:44:04 +08:00
err = taprio_enable_offload(dev, q, new_admin, extack);
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
else
err = taprio_disable_offload(dev, q, extack);
if (err)
goto free_sched;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
/* Protects against enqueue()/dequeue() */
spin_lock_bh(qdisc_lock(sch));
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (tb[TCA_TAPRIO_ATTR_TXTIME_DELAY]) {
if (!TXTIME_ASSIST_IS_ENABLED(q->flags)) {
NL_SET_ERR_MSG_MOD(extack, "txtime-delay can only be set when txtime-assist mode is enabled");
err = -EINVAL;
goto unlock;
}
fix: taprio: Change type of txtime-delay parameter to u32 During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17 03:52:18 +08:00
q->txtime_delay = nla_get_u32(tb[TCA_TAPRIO_ATTR_TXTIME_DELAY]);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
}
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
if (!TXTIME_ASSIST_IS_ENABLED(q->flags) &&
!FULL_OFFLOAD_IS_ENABLED(q->flags) &&
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
!hrtimer_active(&q->advance_timer)) {
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
hrtimer_init(&q->advance_timer, q->clockid, HRTIMER_MODE_ABS);
q->advance_timer.function = advance_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
err = taprio_get_start_time(sch, new_admin, &start);
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:21 +08:00
if (err < 0) {
NL_SET_ERR_MSG(extack, "Internal error: failed get start time");
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
goto unlock;
net: sched: taprio: Refactor taprio_get_start_time() This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 03:44:21 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Fix dropping packets when using taprio + ETF offloading When using taprio offloading together with ETF offloading, configured like this, for example: $ tc qdisc replace dev $IFACE parent root handle 100 taprio \ num_tc 4 \ map 2 2 1 0 3 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 1@3 \ base-time $BASE_TIME \ sched-entry S 01 1000000 \ sched-entry S 0e 1000000 \ flags 0x2 $ tc qdisc replace dev $IFACE parent 100:1 etf \ offload delta 300000 clockid CLOCK_TAI During enqueue, it works out that the verification added for the "txtime" assisted mode is run when using taprio + ETF offloading, the only thing missing is initializing the 'next_txtime' of all the cycle entries. (if we don't set 'next_txtime' all packets from SO_TXTIME sockets are dropped) Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:10 +08:00
setup_txtime(q, new_admin, start);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Fix dropping packets when using taprio + ETF offloading When using taprio offloading together with ETF offloading, configured like this, for example: $ tc qdisc replace dev $IFACE parent root handle 100 taprio \ num_tc 4 \ map 2 2 1 0 3 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 1@3 \ base-time $BASE_TIME \ sched-entry S 01 1000000 \ sched-entry S 0e 1000000 \ flags 0x2 $ tc qdisc replace dev $IFACE parent 100:1 etf \ offload delta 300000 clockid CLOCK_TAI During enqueue, it works out that the verification added for the "txtime" assisted mode is run when using taprio + ETF offloading, the only thing missing is initializing the 'next_txtime' of all the cycle entries. (if we don't set 'next_txtime' all packets from SO_TXTIME sockets are dropped) Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:10 +08:00
if (TXTIME_ASSIST_IS_ENABLED(q->flags)) {
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (!oper) {
rcu_assign_pointer(q->oper_sched, new_admin);
err = 0;
new_admin = NULL;
goto unlock;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
rcu_assign_pointer(q->admin_sched, new_admin);
if (admin)
call_rcu(&admin->rcu, taprio_free_sched_cb);
} else {
setup_first_close_time(q, new_admin, start);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
/* Protects against advance_sched() */
spin_lock_irqsave(&q->current_entry_lock, flags);
taprio_start_sched(sch, start, new_admin);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
rcu_assign_pointer(q->admin_sched, new_admin);
if (admin)
call_rcu(&admin->rcu, taprio_free_sched_cb);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
spin_unlock_irqrestore(&q->current_entry_lock, flags);
taprio: fix panic while hw offload sched list swap Don't swap oper and admin schedules too early, it's not correct and causes crash. Steps to reproduce: 1) tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 \ base-time $SOME_BASE_TIME \ sched-entry S 01 80000 \ sched-entry S 02 15000 \ sched-entry S 04 40000 \ flags 2 2) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 90000 \ sched-entry S 02 20000 \ sched-entry S 04 40000 \ flags 2 3) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 150000 \ sched-entry S 02 200000 \ sched-entry S 04 40000 \ flags 2 Do 2 3 2 .. steps more times if not happens and observe: [ 305.832319] Unable to handle kernel write to read-only memory at virtual address ffff0000087ce7f0 [ 305.910887] CPU: 0 PID: 0 Comm: swapper/0 Not tainted [ 305.919306] Hardware name: Texas Instruments AM654 Base Board (DT) [...] [ 306.017119] x1 : ffff800848031d88 x0 : ffff800848031d80 [ 306.022422] Call trace: [ 306.024866] taprio_free_sched_cb+0x4c/0x98 [ 306.029040] rcu_process_callbacks+0x25c/0x410 [ 306.033476] __do_softirq+0x10c/0x208 [ 306.037132] irq_exit+0xb8/0xc8 [ 306.040267] __handle_domain_irq+0x64/0xb8 [ 306.044352] gic_handle_irq+0x7c/0x178 [ 306.048092] el1_irq+0xb0/0x128 [ 306.051227] arch_cpu_idle+0x10/0x18 [ 306.054795] do_idle+0x120/0x138 [ 306.058015] cpu_startup_entry+0x20/0x28 [ 306.061931] rest_init+0xcc/0xd8 [ 306.065154] start_kernel+0x3bc/0x3e4 [ 306.068810] Code: f2fbd5b7 f2fbd5b6 d503201f f9400422 (f9000662) [ 306.074900] ---[ end trace 96c8e2284a9d9d6e ]--- [ 306.079507] Kernel panic - not syncing: Fatal exception in interrupt [ 306.085847] SMP: stopping secondary CPUs [ 306.089765] Kernel Offset: disabled Try to explain one of the possible crash cases: The "real" admin list is assigned when admin_sched is set to new_admin, it happens after "swap", that assigns to oper_sched NULL. Thus if call qdisc show it can crash. Farther, next second time, when sched list is updated, the admin_sched is not NULL and becomes the oper_sched, previous oper_sched was NULL so just skipped. But then admin_sched is assigned new_admin, but schedules to free previous assigned admin_sched (that already became oper_sched). Farther, next third time, when sched list is updated, while one more swap, oper_sched is not null, but it was happy to be freed already (while prev. admin update), so while try to free oper_sched the kernel panic happens at taprio_free_sched_cb(). So, move the "swap emulation" where it should be according to function comment from code. Fixes: 9c66d15646760e ("taprio: Add support for hardware offloading") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02 07:28:28 +08:00
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
if (FULL_OFFLOAD_IS_ENABLED(q->flags))
taprio: fix panic while hw offload sched list swap Don't swap oper and admin schedules too early, it's not correct and causes crash. Steps to reproduce: 1) tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 \ base-time $SOME_BASE_TIME \ sched-entry S 01 80000 \ sched-entry S 02 15000 \ sched-entry S 04 40000 \ flags 2 2) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 90000 \ sched-entry S 02 20000 \ sched-entry S 04 40000 \ flags 2 3) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 150000 \ sched-entry S 02 200000 \ sched-entry S 04 40000 \ flags 2 Do 2 3 2 .. steps more times if not happens and observe: [ 305.832319] Unable to handle kernel write to read-only memory at virtual address ffff0000087ce7f0 [ 305.910887] CPU: 0 PID: 0 Comm: swapper/0 Not tainted [ 305.919306] Hardware name: Texas Instruments AM654 Base Board (DT) [...] [ 306.017119] x1 : ffff800848031d88 x0 : ffff800848031d80 [ 306.022422] Call trace: [ 306.024866] taprio_free_sched_cb+0x4c/0x98 [ 306.029040] rcu_process_callbacks+0x25c/0x410 [ 306.033476] __do_softirq+0x10c/0x208 [ 306.037132] irq_exit+0xb8/0xc8 [ 306.040267] __handle_domain_irq+0x64/0xb8 [ 306.044352] gic_handle_irq+0x7c/0x178 [ 306.048092] el1_irq+0xb0/0x128 [ 306.051227] arch_cpu_idle+0x10/0x18 [ 306.054795] do_idle+0x120/0x138 [ 306.058015] cpu_startup_entry+0x20/0x28 [ 306.061931] rest_init+0xcc/0xd8 [ 306.065154] start_kernel+0x3bc/0x3e4 [ 306.068810] Code: f2fbd5b7 f2fbd5b6 d503201f f9400422 (f9000662) [ 306.074900] ---[ end trace 96c8e2284a9d9d6e ]--- [ 306.079507] Kernel panic - not syncing: Fatal exception in interrupt [ 306.085847] SMP: stopping secondary CPUs [ 306.089765] Kernel Offset: disabled Try to explain one of the possible crash cases: The "real" admin list is assigned when admin_sched is set to new_admin, it happens after "swap", that assigns to oper_sched NULL. Thus if call qdisc show it can crash. Farther, next second time, when sched list is updated, the admin_sched is not NULL and becomes the oper_sched, previous oper_sched was NULL so just skipped. But then admin_sched is assigned new_admin, but schedules to free previous assigned admin_sched (that already became oper_sched). Farther, next third time, when sched list is updated, while one more swap, oper_sched is not null, but it was happy to be freed already (while prev. admin update), so while try to free oper_sched the kernel panic happens at taprio_free_sched_cb(). So, move the "swap emulation" where it should be according to function comment from code. Fixes: 9c66d15646760e ("taprio: Add support for hardware offloading") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02 07:28:28 +08:00
taprio_offload_config_changed(q);
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
}
new_admin = NULL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
err = 0;
unlock:
spin_unlock_bh(qdisc_lock(sch));
free_sched:
net: sched: sch_taprio: fix memleak in error path for sched list parse In error case, all entries should be freed from the sched list before deleting it. For simplicity use rcu way. Fixes: 5a781ccbd19e46 ("tc: Add support for configuring the taprio scheduler") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-07 06:45:40 +08:00
if (new_admin)
call_rcu(&new_admin->rcu, taprio_free_sched_cb);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
return err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
net/sched: sch_taprio: reset child qdiscs before freeing them syzkaller shows that packets can still be dequeued while taprio_destroy() is running. Let sch_taprio use the reset() function to cancel the advance timer and drop all skbs from the child qdiscs. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17 02:33:29 +08:00
static void taprio_reset(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
int i;
hrtimer_cancel(&q->advance_timer);
if (q->qdiscs) {
net/sched: sch_taprio: ensure to reset/destroy all child qdiscs taprio_graft() can insert a NULL element in the array of child qdiscs. As a consquence, taprio_reset() might not reset child qdiscs completely, and taprio_destroy() might leak resources. Fix it by ensuring that loops that iterate over q->qdiscs[] don't end when they find the first NULL item. Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18 05:29:46 +08:00
for (i = 0; i < dev->num_tx_queues; i++)
if (q->qdiscs[i])
qdisc_reset(q->qdiscs[i]);
net/sched: sch_taprio: reset child qdiscs before freeing them syzkaller shows that packets can still be dequeued while taprio_destroy() is running. Let sch_taprio use the reset() function to cancel the advance timer and drop all skbs from the child qdiscs. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17 02:33:29 +08:00
}
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static void taprio_destroy(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
net/sched: taprio: use rtnl_dereference for oper and admin sched in taprio_destroy() Sparse complains that taprio_destroy() dereferences q->oper_sched and q->admin_sched without rcu_dereference(), since they are marked as __rcu in the taprio private structure. 1671:28: warning: incorrect type in argument 1 (different address spaces) 1671:28: expected struct callback_head *head 1671:28: got struct callback_head [noderef] __rcu * 1674:28: warning: incorrect type in argument 1 (different address spaces) 1674:28: expected struct callback_head *head 1674:28: got struct callback_head [noderef] __rcu * To silence that build warning, do actually use rtnl_dereference(), since we know the rtnl_mutex is held at the time of q->destroy(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:42 +08:00
struct sched_gate_list *oper, *admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
unsigned int i;
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
list_del(&q->taprio_list);
net/sched: sch_taprio: properly cancel timer from taprio_destroy() There is a comment in qdisc_create() about us not calling ops->reset() in some cases. err_out4: /* * Any broken qdiscs that would require a ops->reset() here? * The qdisc was never in action so it shouldn't be necessary. */ As taprio sets a timer before actually receiving a packet, we need to cancel it from ops->destroy, just in case ops->reset has not been called. syzbot reported: ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22 WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000130f330 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020 R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000 FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __debug_check_no_obj_freed lib/debugobjects.c:987 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018 slab_free_hook mm/slub.c:1603 [inline] slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653 slab_free mm/slub.c:3213 [inline] kfree+0xe4/0x540 mm/slub.c:4267 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Davide Caratti <dcaratti@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05 03:55:22 +08:00
/* Note that taprio_reset() might not be called if an error
* happens in qdisc_create(), after taprio_init() has been called.
*/
hrtimer_cancel(&q->advance_timer);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
taprio_disable_offload(dev, q, NULL);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (q->qdiscs) {
net/sched: sch_taprio: ensure to reset/destroy all child qdiscs taprio_graft() can insert a NULL element in the array of child qdiscs. As a consquence, taprio_reset() might not reset child qdiscs completely, and taprio_destroy() might leak resources. Fix it by ensuring that loops that iterate over q->qdiscs[] don't end when they find the first NULL item. Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18 05:29:46 +08:00
for (i = 0; i < dev->num_tx_queues; i++)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
qdisc_put(q->qdiscs[i]);
kfree(q->qdiscs);
}
q->qdiscs = NULL;
taprio: Use taprio_reset_tc() to reset Traffic Classes configuration When destroying the current taprio instance, which can happen when the creation of one fails, we should reset the traffic class configuration back to the default state. netdev_reset_tc() is a better way because in addition to setting the number of traffic classes to zero, it also resets the priority to traffic classes mapping to the default value. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:09 +08:00
netdev_reset_tc(dev);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
net/sched: taprio: use rtnl_dereference for oper and admin sched in taprio_destroy() Sparse complains that taprio_destroy() dereferences q->oper_sched and q->admin_sched without rcu_dereference(), since they are marked as __rcu in the taprio private structure. 1671:28: warning: incorrect type in argument 1 (different address spaces) 1671:28: expected struct callback_head *head 1671:28: got struct callback_head [noderef] __rcu * 1674:28: warning: incorrect type in argument 1 (different address spaces) 1674:28: expected struct callback_head *head 1674:28: got struct callback_head [noderef] __rcu * To silence that build warning, do actually use rtnl_dereference(), since we know the rtnl_mutex is held at the time of q->destroy(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:42 +08:00
oper = rtnl_dereference(q->oper_sched);
admin = rtnl_dereference(q->admin_sched);
if (oper)
call_rcu(&oper->rcu, taprio_free_sched_cb);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
net/sched: taprio: use rtnl_dereference for oper and admin sched in taprio_destroy() Sparse complains that taprio_destroy() dereferences q->oper_sched and q->admin_sched without rcu_dereference(), since they are marked as __rcu in the taprio private structure. 1671:28: warning: incorrect type in argument 1 (different address spaces) 1671:28: expected struct callback_head *head 1671:28: got struct callback_head [noderef] __rcu * 1674:28: warning: incorrect type in argument 1 (different address spaces) 1674:28: expected struct callback_head *head 1674:28: got struct callback_head [noderef] __rcu * To silence that build warning, do actually use rtnl_dereference(), since we know the rtnl_mutex is held at the time of q->destroy(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:42 +08:00
if (admin)
call_rcu(&admin->rcu, taprio_free_sched_cb);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
static int taprio_init(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
int i;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
spin_lock_init(&q->current_entry_lock);
hrtimer_init(&q->advance_timer, CLOCK_TAI, HRTIMER_MODE_ABS);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
q->advance_timer.function = advance_sched;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
q->root = sch;
/* We only support static clockids. Use an invalid value as default
* and get the valid one on taprio_change().
*/
q->clockid = -1;
taprio: Fix still allowing changing the flags during runtime Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07 05:46:07 +08:00
q->flags = TAPRIO_FLAGS_INVALID;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Fix kernel panic in taprio_destroy taprio_init may fail earlier than this line: list_add(&q->taprio_list, &taprio_list); i.e. due to the net device not being multi queue. Attempting to remove q from the global taprio_list when it is not part of it will result in a kernel panic. Fix it by matching list_add and list_del better to one another in the order of operations. This way we can keep the deletion unconditional and with lower complexity - O(1). Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30 09:07:21 +08:00
list_add(&q->taprio_list, &taprio_list);
net/sched: taprio: add extack messages in taprio_init Stop contributing to the proverbial user unfriendliness of tc, and tell the user what is wrong wherever possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:45 +08:00
if (sch->parent != TC_H_ROOT) {
NL_SET_ERR_MSG_MOD(extack, "Can only be attached as root qdisc");
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return -EOPNOTSUPP;
net/sched: taprio: add extack messages in taprio_init Stop contributing to the proverbial user unfriendliness of tc, and tell the user what is wrong wherever possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:45 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
net/sched: taprio: add extack messages in taprio_init Stop contributing to the proverbial user unfriendliness of tc, and tell the user what is wrong wherever possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:45 +08:00
if (!netif_is_multiqueue(dev)) {
NL_SET_ERR_MSG_MOD(extack, "Multi-queue device is required");
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return -EOPNOTSUPP;
net/sched: taprio: add extack messages in taprio_init Stop contributing to the proverbial user unfriendliness of tc, and tell the user what is wrong wherever possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:45 +08:00
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
/* pre-allocate qdisc, attachment can't fail */
q->qdiscs = kcalloc(dev->num_tx_queues,
sizeof(q->qdiscs[0]),
GFP_KERNEL);
if (!q->qdiscs)
return -ENOMEM;
if (!opt)
return -EINVAL;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
for (i = 0; i < dev->num_tx_queues; i++) {
struct netdev_queue *dev_queue;
struct Qdisc *qdisc;
dev_queue = netdev_get_tx_queue(dev, i);
qdisc = qdisc_create_dflt(dev_queue,
&pfifo_qdisc_ops,
TC_H_MAKE(TC_H_MAJ(sch->handle),
TC_H_MIN(i + 1)),
extack);
if (!qdisc)
return -ENOMEM;
if (i < dev->real_num_tx_queues)
qdisc_hash_add(qdisc, false);
q->qdiscs[i] = qdisc;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return taprio_change(sch, opt, extack);
}
net: taprio offload: enforce qdisc to netdev queue mapping Even though the taprio qdisc is designed for multiqueue devices, all the queues still point to the same top-level taprio qdisc. This works and is probably required for software taprio, but at least with offload taprio, it has an undesirable side effect: because the whole qdisc is run when a packet has to be sent, it allows packets in a best-effort class to be processed in the context of a task sending higher priority traffic. If there are packets left in the qdisc after that first run, the NET_TX softirq is raised and gets executed immediately in the same process context. As with any other softirq, it runs up to 10 times and for up to 2ms, during which the calling process is waiting for the sendmsg call (or similar) to return. In my use case, that calling process is a real-time task scheduled to send a packet every 2ms, so the long sendmsg calls are leading to missed timeslots. By attaching each netdev queue to its own qdisc, as it is done with the "classic" mq qdisc, each traffic class can be processed independently without touching the other classes. A high-priority process can then send packets without getting stuck in the sendmsg call anymore. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 01:18:29 +08:00
static void taprio_attach(struct Qdisc *sch)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
unsigned int ntx;
/* Attach underlying qdisc */
for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
struct Qdisc *qdisc = q->qdiscs[ntx];
struct Qdisc *old;
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
qdisc->flags |= TCQ_F_ONETXQUEUE | TCQ_F_NOPARENT;
old = dev_graft_qdisc(qdisc->dev_queue, qdisc);
} else {
old = dev_graft_qdisc(qdisc->dev_queue, sch);
qdisc_refcount_inc(sch);
}
if (old)
qdisc_put(old);
}
/* access to the child qdiscs is not needed in offload mode */
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
kfree(q->qdiscs);
q->qdiscs = NULL;
}
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static struct netdev_queue *taprio_queue_get(struct Qdisc *sch,
unsigned long cl)
{
struct net_device *dev = qdisc_dev(sch);
unsigned long ntx = cl - 1;
if (ntx >= dev->num_tx_queues)
return NULL;
return netdev_get_tx_queue(dev, ntx);
}
static int taprio_graft(struct Qdisc *sch, unsigned long cl,
struct Qdisc *new, struct Qdisc **old,
struct netlink_ext_ack *extack)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
if (!dev_queue)
return -EINVAL;
if (dev->flags & IFF_UP)
dev_deactivate(dev);
net: taprio offload: enforce qdisc to netdev queue mapping Even though the taprio qdisc is designed for multiqueue devices, all the queues still point to the same top-level taprio qdisc. This works and is probably required for software taprio, but at least with offload taprio, it has an undesirable side effect: because the whole qdisc is run when a packet has to be sent, it allows packets in a best-effort class to be processed in the context of a task sending higher priority traffic. If there are packets left in the qdisc after that first run, the NET_TX softirq is raised and gets executed immediately in the same process context. As with any other softirq, it runs up to 10 times and for up to 2ms, during which the calling process is waiting for the sendmsg call (or similar) to return. In my use case, that calling process is a real-time task scheduled to send a packet every 2ms, so the long sendmsg calls are leading to missed timeslots. By attaching each netdev queue to its own qdisc, as it is done with the "classic" mq qdisc, each traffic class can be processed independently without touching the other classes. A high-priority process can then send packets without getting stuck in the sendmsg call anymore. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 01:18:29 +08:00
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
*old = dev_graft_qdisc(dev_queue, new);
} else {
*old = q->qdiscs[cl - 1];
q->qdiscs[cl - 1] = new;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (new)
new->flags |= TCQ_F_ONETXQUEUE | TCQ_F_NOPARENT;
if (dev->flags & IFF_UP)
dev_activate(dev);
return 0;
}
static int dump_entry(struct sk_buff *msg,
const struct sched_entry *entry)
{
struct nlattr *item;
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 17:13:06 +08:00
item = nla_nest_start_noflag(msg, TCA_TAPRIO_SCHED_ENTRY);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (!item)
return -ENOSPC;
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_INDEX, entry->index))
goto nla_put_failure;
if (nla_put_u8(msg, TCA_TAPRIO_SCHED_ENTRY_CMD, entry->command))
goto nla_put_failure;
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_GATE_MASK,
entry->gate_mask))
goto nla_put_failure;
if (nla_put_u32(msg, TCA_TAPRIO_SCHED_ENTRY_INTERVAL,
entry->interval))
goto nla_put_failure;
return nla_nest_end(msg, item);
nla_put_failure:
nla_nest_cancel(msg, item);
return -1;
}
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
static int dump_schedule(struct sk_buff *msg,
const struct sched_gate_list *root)
{
struct nlattr *entry_list;
struct sched_entry *entry;
if (nla_put_s64(msg, TCA_TAPRIO_ATTR_SCHED_BASE_TIME,
root->base_time, TCA_TAPRIO_PAD))
return -1;
taprio: Add support for setting the cycle-time manually IEEE 802.1Q-2018 defines that a the cycle-time of a schedule may be overridden, so the schedule is truncated to a determined "width". Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:32 +08:00
if (nla_put_s64(msg, TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME,
root->cycle_time, TCA_TAPRIO_PAD))
return -1;
taprio: Add support for cycle-time-extension IEEE 802.1Q-2018 defines the concept of a cycle-time-extension, so the last entry of a schedule before the start of a new schedule can be extended, so "too-short" entries can be avoided. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:33 +08:00
if (nla_put_s64(msg, TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION,
root->cycle_time_extension, TCA_TAPRIO_PAD))
return -1;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
entry_list = nla_nest_start_noflag(msg,
TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST);
if (!entry_list)
goto error_nest;
list_for_each_entry(entry, &root->entries, list) {
if (dump_entry(msg, entry) < 0)
goto error_nest;
}
nla_nest_end(msg, entry_list);
return 0;
error_nest:
nla_nest_cancel(msg, entry_list);
return -1;
}
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
static int taprio_dump_tc_entries(struct taprio_sched *q, struct sk_buff *skb)
{
struct nlattr *n;
int tc;
for (tc = 0; tc < TC_MAX_QUEUE; tc++) {
n = nla_nest_start(skb, TCA_TAPRIO_ATTR_TC_ENTRY);
if (!n)
return -EMSGSIZE;
if (nla_put_u32(skb, TCA_TAPRIO_TC_ENTRY_INDEX, tc))
goto nla_put_failure;
if (nla_put_u32(skb, TCA_TAPRIO_TC_ENTRY_MAX_SDU,
q->max_sdu[tc]))
goto nla_put_failure;
nla_nest_end(skb, n);
}
return 0;
nla_put_failure:
nla_nest_cancel(skb, n);
return -EMSGSIZE;
}
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static int taprio_dump(struct Qdisc *sch, struct sk_buff *skb)
{
struct taprio_sched *q = qdisc_priv(sch);
struct net_device *dev = qdisc_dev(sch);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct sched_gate_list *oper, *admin;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
struct tc_mqprio_qopt opt = { 0 };
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
struct nlattr *nest, *sched_nest;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
unsigned int i;
net/sched: taprio: taprio_dump and taprio_change are protected by rtnl_mutex Since the writer-side lock is taken here, we do not need to open an RCU read-side critical section, instead we can use rtnl_dereference() to tell lockdep we are serialized with concurrent writes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15 18:50:41 +08:00
oper = rtnl_dereference(q->oper_sched);
admin = rtnl_dereference(q->admin_sched);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
opt.num_tc = netdev_get_num_tc(dev);
memcpy(opt.prio_tc_map, dev->prio_tc_map, sizeof(opt.prio_tc_map));
for (i = 0; i < netdev_get_num_tc(dev); i++) {
opt.count[i] = dev->tc_to_txq[i].count;
opt.offset[i] = dev->tc_to_txq[i].offset;
}
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 17:13:06 +08:00
nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (!nest)
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
goto start_error;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
if (nla_put(skb, TCA_TAPRIO_ATTR_PRIOMAP, sizeof(opt), &opt))
goto options_error;
taprio: Add support for hardware offloading This allows taprio to offload the schedule enforcement to capable network cards, resulting in more precise windows and less CPU usage. The gate mask acts on traffic classes (groups of queues of same priority), as specified in IEEE 802.1Q-2018, and following the existing taprio and mqprio semantics. It is up to the driver to perform conversion between tc and individual netdev queues if for some reason it needs to make that distinction. Full offload is requested from the network interface by specifying "flags 2" in the tc qdisc creation command, which in turn corresponds to the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit. The important detail here is the clockid which is implicitly /dev/ptpN for full offload, and hence not configurable. A reference counting API is added to support the use case where Ethernet drivers need to keep the taprio offload structure locally (i.e. they are a multi-port switch driver, and configuring a port depends on the settings of other ports as well). The refcount_t variable is kept in a private structure (__tc_taprio_qopt_offload) and not exposed to drivers. In the future, the private structure might also be expanded with a backpointer to taprio_sched *q, to implement the notification system described in the patch (of when admin became oper, or an error occurred, etc, so the offload can be monitored with 'tc qdisc show'). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 09:59:58 +08:00
if (!FULL_OFFLOAD_IS_ENABLED(q->flags) &&
nla_put_s32(skb, TCA_TAPRIO_ATTR_SCHED_CLOCKID, q->clockid))
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
goto options_error;
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
if (q->flags && nla_put_u32(skb, TCA_TAPRIO_ATTR_FLAGS, q->flags))
goto options_error;
if (q->txtime_delay &&
fix: taprio: Change type of txtime-delay parameter to u32 During the review of the iproute2 patches for txtime-assist mode, it was pointed out that it does not make sense for the txtime-delay parameter to be negative. So, change the type of the parameter from s32 to u32. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17 03:52:18 +08:00
nla_put_u32(skb, TCA_TAPRIO_ATTR_TXTIME_DELAY, q->txtime_delay))
taprio: Add support for txtime-assist mode Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 06:07:17 +08:00
goto options_error;
net/sched: taprio: allow user input of per-tc max SDU IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the existence of a per traffic class limitation of maximum frame sizes, with a fallback on the port-based MTU. As far as I am able to understand, the 802.1Q Service Data Unit (SDU) represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding any number of prepended VLAN headers which may be otherwise present in the MSDU. Therefore, the queueMaxSDU is directly comparable to the device MTU (1500 means L2 payload sizes are accepted, or frame sizes of 1518 octets, or 1522 plus one VLAN header). Drivers which offload this are directly responsible of translating into other units of measurement. To keep the fast path checks optimized, we keep 2 arrays in the qdisc, one for max_sdu translated into frame length (so that it's comparable to skb->len), and another for offloading and for dumping back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28 17:51:58 +08:00
if (taprio_dump_tc_entries(q, skb))
goto options_error;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (oper && dump_schedule(skb, oper))
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
goto options_error;
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (!admin)
goto done;
sched_nest = nla_nest_start_noflag(skb, TCA_TAPRIO_ATTR_ADMIN_SCHED);
taprio: add null check on sched_nest to avoid potential null pointer dereference The call to nla_nest_start_noflag can return a null pointer and currently this is not being checked and this can lead to a null pointer dereference when the null pointer sched_nest is passed to function nla_nest_end. Fix this by adding in a null pointer check. Addresses-Coverity: ("Dereference null return value") Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-06 05:50:19 +08:00
if (!sched_nest)
goto options_error;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
if (dump_schedule(skb, admin))
goto admin_error;
nla_nest_end(skb, sched_nest);
done:
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return nla_nest_end(skb, nest);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
admin_error:
nla_nest_cancel(skb, sched_nest);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
options_error:
nla_nest_cancel(skb, nest);
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
start_error:
return -ENOSPC;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
static struct Qdisc *taprio_leaf(struct Qdisc *sch, unsigned long cl)
{
Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs" taprio_attach() has this logic at the end, which should have been removed with the blamed patch (which is now being reverted): /* access to the child qdiscs is not needed in offload mode */ if (FULL_OFFLOAD_IS_ENABLED(q->flags)) { kfree(q->qdiscs); q->qdiscs = NULL; } because otherwise, we make use of q->qdiscs[] even after this array was deallocated, namely in taprio_leaf(). Therefore, whenever one would try to attach a valid child qdisc to a fully offloaded taprio root, one would immediately dereference a NULL pointer. $ tc qdisc replace dev eno0 handle 8001: parent root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ max-sdu 0 0 0 0 0 200 0 0 \ base-time 200 \ sched-entry S 80 20000 \ sched-entry S a0 20000 \ sched-entry S 5f 60000 \ flags 2 $ max_frame_size=1500 $ data_rate_kbps=20000 $ port_transmit_rate_kbps=1000000 $ idleslope=$data_rate_kbps $ sendslope=$(($idleslope - $port_transmit_rate_kbps)) $ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps)) $ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps)) $ tc qdisc replace dev eno0 parent 8001:7 cbs \ idleslope $idleslope \ sendslope $sendslope \ hicredit $hicredit \ locredit $locredit \ offload 0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 pc : taprio_leaf+0x28/0x40 lr : qdisc_leaf+0x3c/0x60 Call trace: taprio_leaf+0x28/0x40 tc_modify_qdisc+0xf0/0x72c rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c The solution is not as obvious as the problem. The code which deallocates q->qdiscs[] is in fact copied and pasted from mqprio, which also deallocates the array in mqprio_attach() and never uses it afterwards. Therefore, the identical cleanup logic of priv->qdiscs[] that mqprio_destroy() has is deceptive because it will never take place at qdisc_destroy() time, but just at raw ops->destroy() time (otherwise said, priv->qdiscs[] do not last for the entire lifetime of the mqprio root), but rather, this is just the twisted way in which the Qdisc API understands error path cleanup should be done (Qdisc_ops :: destroy() is called even when Qdisc_ops :: init() never succeeded). Side note, in fact this is also what the comment in mqprio_init() says: /* pre-allocate qdisc, attachment can't fail */ Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as data passing between Qdisc_ops :: init() and Qdisc_ops :: attach(). [ this comment was also copied and pasted into the initial taprio commit, even though taprio_attach() came way later ] The problem is that taprio also makes extensive use of the q->qdiscs[] array in the software fast path (taprio_enqueue() and taprio_dequeue()), but it does not keep a reference of its own on q->qdiscs[i] (you'd think that since it creates these Qdiscs, it holds the reference, but nope, this is not completely true). To understand the difference between taprio_destroy() and mqprio_destroy() one must look before commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), because that just muddied the waters. In the "original" taprio design, taprio always attached itself (the root Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go through taprio_enqueue(). It also called qdisc_refcount_inc() on itself for as many times as there were netdev TX queues, in order to counter-balance what tc_get_qdisc() does when destroying a Qdisc (simplified for brevity below): if (n->nlmsg_type == RTM_DELQDISC) err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack); qdisc_graft(where "new" is NULL so this deletes the Qdisc): for (i = 0; i < num_q; i++) { struct netdev_queue *dev_queue; dev_queue = netdev_get_tx_queue(dev, i); old = dev_graft_qdisc(dev_queue, new); if (new && i > 0) qdisc_refcount_inc(new); qdisc_put(old); ~~~~~~~~~~~~~~ this decrements taprio's refcount once for each TX queue } notify_and_destroy(net, skb, n, classid, rtnl_dereference(dev->qdisc), new); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and this finally decrements it to zero, making qdisc_put() call qdisc_destroy() The q->qdiscs[] created using qdisc_create_dflt() (or their replacements, if taprio_graft() was ever to get called) were then privately freed by taprio_destroy(). This is still what is happening after commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), but only for software mode. In full offload mode, the per-txq "qdisc_put(old)" calls from qdisc_graft() now deallocate the child Qdiscs rather than decrement taprio's refcount. So when notify_and_destroy(taprio) finally calls taprio_destroy(), the difference is that the child Qdiscs were already deallocated. And this is exactly why the taprio_attach() comment "access to the child qdiscs is not needed in offload mode" is deceptive too. Not only the q->qdiscs[] array is not needed, but it is also necessary to get rid of it as soon as possible, because otherwise, we will also call qdisc_put() on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this will cause a nasty use-after-free/refcount-saturate/whatever. In short, the problem is that since the blamed commit, taprio_leaf() needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy() -> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach() for full offload. Fixing one problem triggers the other. All of this can be solved by making taprio keep its q->qdiscs[i] with a refcount elevated at 2 (in offloaded mode where they are attached to the netdev TX queues), both in taprio_attach() and in taprio_graft(). The generic qdisc_graft() would just decrement the child qdiscs' refcounts to 1, and taprio_destroy() would give them the final coup de grace. However the rabbit hole of changes is getting quite deep, and the complexity increases. The blamed commit was supposed to be a bug fix in the first place, and the bug it addressed is not so significant so as to justify further rework in stable trees. So I'd rather just revert it. I don't know enough about multi-queue Qdisc design to make a proper judgement right now regarding what is/isn't idiomatic use of Qdisc concepts in taprio. I will try to study the problem more and come with a different solution in net-next. Fixes: 1461d212ab27 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs") Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05 06:01:00 +08:00
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs" taprio_attach() has this logic at the end, which should have been removed with the blamed patch (which is now being reverted): /* access to the child qdiscs is not needed in offload mode */ if (FULL_OFFLOAD_IS_ENABLED(q->flags)) { kfree(q->qdiscs); q->qdiscs = NULL; } because otherwise, we make use of q->qdiscs[] even after this array was deallocated, namely in taprio_leaf(). Therefore, whenever one would try to attach a valid child qdisc to a fully offloaded taprio root, one would immediately dereference a NULL pointer. $ tc qdisc replace dev eno0 handle 8001: parent root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ max-sdu 0 0 0 0 0 200 0 0 \ base-time 200 \ sched-entry S 80 20000 \ sched-entry S a0 20000 \ sched-entry S 5f 60000 \ flags 2 $ max_frame_size=1500 $ data_rate_kbps=20000 $ port_transmit_rate_kbps=1000000 $ idleslope=$data_rate_kbps $ sendslope=$(($idleslope - $port_transmit_rate_kbps)) $ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps)) $ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps)) $ tc qdisc replace dev eno0 parent 8001:7 cbs \ idleslope $idleslope \ sendslope $sendslope \ hicredit $hicredit \ locredit $locredit \ offload 0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 pc : taprio_leaf+0x28/0x40 lr : qdisc_leaf+0x3c/0x60 Call trace: taprio_leaf+0x28/0x40 tc_modify_qdisc+0xf0/0x72c rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c The solution is not as obvious as the problem. The code which deallocates q->qdiscs[] is in fact copied and pasted from mqprio, which also deallocates the array in mqprio_attach() and never uses it afterwards. Therefore, the identical cleanup logic of priv->qdiscs[] that mqprio_destroy() has is deceptive because it will never take place at qdisc_destroy() time, but just at raw ops->destroy() time (otherwise said, priv->qdiscs[] do not last for the entire lifetime of the mqprio root), but rather, this is just the twisted way in which the Qdisc API understands error path cleanup should be done (Qdisc_ops :: destroy() is called even when Qdisc_ops :: init() never succeeded). Side note, in fact this is also what the comment in mqprio_init() says: /* pre-allocate qdisc, attachment can't fail */ Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as data passing between Qdisc_ops :: init() and Qdisc_ops :: attach(). [ this comment was also copied and pasted into the initial taprio commit, even though taprio_attach() came way later ] The problem is that taprio also makes extensive use of the q->qdiscs[] array in the software fast path (taprio_enqueue() and taprio_dequeue()), but it does not keep a reference of its own on q->qdiscs[i] (you'd think that since it creates these Qdiscs, it holds the reference, but nope, this is not completely true). To understand the difference between taprio_destroy() and mqprio_destroy() one must look before commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), because that just muddied the waters. In the "original" taprio design, taprio always attached itself (the root Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go through taprio_enqueue(). It also called qdisc_refcount_inc() on itself for as many times as there were netdev TX queues, in order to counter-balance what tc_get_qdisc() does when destroying a Qdisc (simplified for brevity below): if (n->nlmsg_type == RTM_DELQDISC) err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack); qdisc_graft(where "new" is NULL so this deletes the Qdisc): for (i = 0; i < num_q; i++) { struct netdev_queue *dev_queue; dev_queue = netdev_get_tx_queue(dev, i); old = dev_graft_qdisc(dev_queue, new); if (new && i > 0) qdisc_refcount_inc(new); qdisc_put(old); ~~~~~~~~~~~~~~ this decrements taprio's refcount once for each TX queue } notify_and_destroy(net, skb, n, classid, rtnl_dereference(dev->qdisc), new); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and this finally decrements it to zero, making qdisc_put() call qdisc_destroy() The q->qdiscs[] created using qdisc_create_dflt() (or their replacements, if taprio_graft() was ever to get called) were then privately freed by taprio_destroy(). This is still what is happening after commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), but only for software mode. In full offload mode, the per-txq "qdisc_put(old)" calls from qdisc_graft() now deallocate the child Qdiscs rather than decrement taprio's refcount. So when notify_and_destroy(taprio) finally calls taprio_destroy(), the difference is that the child Qdiscs were already deallocated. And this is exactly why the taprio_attach() comment "access to the child qdiscs is not needed in offload mode" is deceptive too. Not only the q->qdiscs[] array is not needed, but it is also necessary to get rid of it as soon as possible, because otherwise, we will also call qdisc_put() on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this will cause a nasty use-after-free/refcount-saturate/whatever. In short, the problem is that since the blamed commit, taprio_leaf() needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy() -> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach() for full offload. Fixing one problem triggers the other. All of this can be solved by making taprio keep its q->qdiscs[i] with a refcount elevated at 2 (in offloaded mode where they are attached to the netdev TX queues), both in taprio_attach() and in taprio_graft(). The generic qdisc_graft() would just decrement the child qdiscs' refcounts to 1, and taprio_destroy() would give them the final coup de grace. However the rabbit hole of changes is getting quite deep, and the complexity increases. The blamed commit was supposed to be a bug fix in the first place, and the bug it addressed is not so significant so as to justify further rework in stable trees. So I'd rather just revert it. I don't know enough about multi-queue Qdisc design to make a proper judgement right now regarding what is/isn't idiomatic use of Qdisc concepts in taprio. I will try to study the problem more and come with a different solution in net-next. Fixes: 1461d212ab27 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs") Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05 06:01:00 +08:00
if (!dev_queue)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return NULL;
Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs" taprio_attach() has this logic at the end, which should have been removed with the blamed patch (which is now being reverted): /* access to the child qdiscs is not needed in offload mode */ if (FULL_OFFLOAD_IS_ENABLED(q->flags)) { kfree(q->qdiscs); q->qdiscs = NULL; } because otherwise, we make use of q->qdiscs[] even after this array was deallocated, namely in taprio_leaf(). Therefore, whenever one would try to attach a valid child qdisc to a fully offloaded taprio root, one would immediately dereference a NULL pointer. $ tc qdisc replace dev eno0 handle 8001: parent root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ max-sdu 0 0 0 0 0 200 0 0 \ base-time 200 \ sched-entry S 80 20000 \ sched-entry S a0 20000 \ sched-entry S 5f 60000 \ flags 2 $ max_frame_size=1500 $ data_rate_kbps=20000 $ port_transmit_rate_kbps=1000000 $ idleslope=$data_rate_kbps $ sendslope=$(($idleslope - $port_transmit_rate_kbps)) $ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps)) $ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps)) $ tc qdisc replace dev eno0 parent 8001:7 cbs \ idleslope $idleslope \ sendslope $sendslope \ hicredit $hicredit \ locredit $locredit \ offload 0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 pc : taprio_leaf+0x28/0x40 lr : qdisc_leaf+0x3c/0x60 Call trace: taprio_leaf+0x28/0x40 tc_modify_qdisc+0xf0/0x72c rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c The solution is not as obvious as the problem. The code which deallocates q->qdiscs[] is in fact copied and pasted from mqprio, which also deallocates the array in mqprio_attach() and never uses it afterwards. Therefore, the identical cleanup logic of priv->qdiscs[] that mqprio_destroy() has is deceptive because it will never take place at qdisc_destroy() time, but just at raw ops->destroy() time (otherwise said, priv->qdiscs[] do not last for the entire lifetime of the mqprio root), but rather, this is just the twisted way in which the Qdisc API understands error path cleanup should be done (Qdisc_ops :: destroy() is called even when Qdisc_ops :: init() never succeeded). Side note, in fact this is also what the comment in mqprio_init() says: /* pre-allocate qdisc, attachment can't fail */ Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as data passing between Qdisc_ops :: init() and Qdisc_ops :: attach(). [ this comment was also copied and pasted into the initial taprio commit, even though taprio_attach() came way later ] The problem is that taprio also makes extensive use of the q->qdiscs[] array in the software fast path (taprio_enqueue() and taprio_dequeue()), but it does not keep a reference of its own on q->qdiscs[i] (you'd think that since it creates these Qdiscs, it holds the reference, but nope, this is not completely true). To understand the difference between taprio_destroy() and mqprio_destroy() one must look before commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), because that just muddied the waters. In the "original" taprio design, taprio always attached itself (the root Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go through taprio_enqueue(). It also called qdisc_refcount_inc() on itself for as many times as there were netdev TX queues, in order to counter-balance what tc_get_qdisc() does when destroying a Qdisc (simplified for brevity below): if (n->nlmsg_type == RTM_DELQDISC) err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack); qdisc_graft(where "new" is NULL so this deletes the Qdisc): for (i = 0; i < num_q; i++) { struct netdev_queue *dev_queue; dev_queue = netdev_get_tx_queue(dev, i); old = dev_graft_qdisc(dev_queue, new); if (new && i > 0) qdisc_refcount_inc(new); qdisc_put(old); ~~~~~~~~~~~~~~ this decrements taprio's refcount once for each TX queue } notify_and_destroy(net, skb, n, classid, rtnl_dereference(dev->qdisc), new); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and this finally decrements it to zero, making qdisc_put() call qdisc_destroy() The q->qdiscs[] created using qdisc_create_dflt() (or their replacements, if taprio_graft() was ever to get called) were then privately freed by taprio_destroy(). This is still what is happening after commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), but only for software mode. In full offload mode, the per-txq "qdisc_put(old)" calls from qdisc_graft() now deallocate the child Qdiscs rather than decrement taprio's refcount. So when notify_and_destroy(taprio) finally calls taprio_destroy(), the difference is that the child Qdiscs were already deallocated. And this is exactly why the taprio_attach() comment "access to the child qdiscs is not needed in offload mode" is deceptive too. Not only the q->qdiscs[] array is not needed, but it is also necessary to get rid of it as soon as possible, because otherwise, we will also call qdisc_put() on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this will cause a nasty use-after-free/refcount-saturate/whatever. In short, the problem is that since the blamed commit, taprio_leaf() needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy() -> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach() for full offload. Fixing one problem triggers the other. All of this can be solved by making taprio keep its q->qdiscs[i] with a refcount elevated at 2 (in offloaded mode where they are attached to the netdev TX queues), both in taprio_attach() and in taprio_graft(). The generic qdisc_graft() would just decrement the child qdiscs' refcounts to 1, and taprio_destroy() would give them the final coup de grace. However the rabbit hole of changes is getting quite deep, and the complexity increases. The blamed commit was supposed to be a bug fix in the first place, and the bug it addressed is not so significant so as to justify further rework in stable trees. So I'd rather just revert it. I don't know enough about multi-queue Qdisc design to make a proper judgement right now regarding what is/isn't idiomatic use of Qdisc concepts in taprio. I will try to study the problem more and come with a different solution in net-next. Fixes: 1461d212ab27 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs") Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05 06:01:00 +08:00
return dev_queue->qdisc_sleeping;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
static unsigned long taprio_find(struct Qdisc *sch, u32 classid)
{
unsigned int ntx = TC_H_MIN(classid);
if (!taprio_queue_get(sch, ntx))
return 0;
return ntx;
}
static int taprio_dump_class(struct Qdisc *sch, unsigned long cl,
struct sk_buff *skb, struct tcmsg *tcm)
{
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
tcm->tcm_parent = TC_H_ROOT;
tcm->tcm_handle |= TC_H_MIN(cl);
tcm->tcm_info = dev_queue->qdisc_sleeping->handle;
return 0;
}
static int taprio_dump_class_stats(struct Qdisc *sch, unsigned long cl,
struct gnet_dump *d)
__releases(d->lock)
__acquires(d->lock)
{
struct netdev_queue *dev_queue = taprio_queue_get(sch, cl);
sch = dev_queue->qdisc_sleeping;
net: sched: Remove Qdisc::running sequence counter The Qdisc::running sequence counter has two uses: 1. Reliably reading qdisc's tc statistics while the qdisc is running (a seqcount read/retry loop at gnet_stats_add_basic()). 2. As a flag, indicating whether the qdisc in question is running (without any retry loops). For the first usage, the Qdisc::running sequence counter write section, qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what is actually needed: the raw qdisc's bstats update. A u64_stats sync point was thus introduced (in previous commits) inside the bstats structure itself. A local u64_stats write section is then started and stopped for the bstats updates. Use that u64_stats sync point mechanism for the bstats read/retry loop at gnet_stats_add_basic(). For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag, accessed with atomic bitops, is sufficient. Using a bit flag instead of a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads to the SMP barriers implicitly added through raw_read_seqcount() and write_seqcount_begin/end() getting removed. All call sites have been surveyed though, and no required ordering was identified. Now that the qdisc->running sequence counter is no longer used, remove it. Note, using u64_stats implies no sequence counter protection for 64-bit architectures. This can lead to the qdisc tc statistics "packets" vs. "bytes" values getting out of sync on rare occasions. The individual values will still be valid. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16 16:49:10 +08:00
if (gnet_stats_copy_basic(d, NULL, &sch->bstats, true) < 0 ||
net: sched: introduce and use qstats read helpers Classful qdiscs can't access directly the child qdiscs backlog length: if such qdisc is NOLOCK, per CPU values should be accounted instead. Most qdiscs no not respect the above. As a result, qstats fetching for most classful qdisc is currently incorrect: if the child qdisc is NOLOCK, it always reports 0 len backlog. This change introduces a pair of helpers to safely fetch both backlog and qlen and use them in stats class dumping functions, fixing the above issue and cleaning a bit the code. DRR needs also to access the child qdisc queue length, so it needs custom handling. Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28 23:53:12 +08:00
qdisc_qstats_copy(d, sch) < 0)
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return -1;
return 0;
}
static void taprio_walk(struct Qdisc *sch, struct qdisc_walker *arg)
{
struct net_device *dev = qdisc_dev(sch);
unsigned long ntx;
if (arg->stop)
return;
arg->count = arg->skip;
for (ntx = arg->skip; ntx < dev->num_tx_queues; ntx++) {
net/sched: use tc_qdisc_stats_dump() in qdisc use tc_qdisc_stats_dump() in qdisc. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21 10:41:18 +08:00
if (!tc_qdisc_stats_dump(sch, ntx + 1, arg))
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
break;
}
}
static struct netdev_queue *taprio_select_queue(struct Qdisc *sch,
struct tcmsg *tcm)
{
return taprio_queue_get(sch, TC_H_MIN(tcm->tcm_parent));
}
static const struct Qdisc_class_ops taprio_class_ops = {
.graft = taprio_graft,
.leaf = taprio_leaf,
.find = taprio_find,
.walk = taprio_walk,
.dump = taprio_dump_class,
.dump_stats = taprio_dump_class_stats,
.select_queue = taprio_select_queue,
};
static struct Qdisc_ops taprio_qdisc_ops __read_mostly = {
.cl_ops = &taprio_class_ops,
.id = "taprio",
.priv_size = sizeof(struct taprio_sched),
.init = taprio_init,
taprio: Add support adding an admin schedule The IEEE 802.1Q-2018 defines two "types" of schedules, the "Oper" (from operational?) and "Admin" ones. Up until now, 'taprio' only had support for the "Oper" one, added when the qdisc is created. This adds support for the "Admin" one, which allows the .change() operation to be supported. Just for clarification, some quick (and dirty) definitions, the "Oper" schedule is the currently (as in this instant) running one, and it's read-only. The "Admin" one is the one that the system configurator has installed, it can be changed, and it will be "promoted" to "Oper" when it's 'base-time' is reached. The idea behing this patch is that calling something like the below, (after taprio is already configured with an initial schedule): $ tc qdisc change taprio dev IFACE parent root \ base-time X \ sched-entry <CMD> <GATES> <INTERVAL> \ ... Will cause a new admin schedule to be created and programmed to be "promoted" to "Oper" at instant X. If an "Admin" schedule already exists, it will be overwritten with the new parameters. Up until now, there was some code that was added to ease the support of changing a single entry of a schedule, but was ultimately unused. Now, that we have support for "change" with more well thought semantics, updating a single entry seems to be less useful. So we remove what is in practice dead code, and return a "not supported" error if the user tries to use it. If changing a single entry would make the user's life easier we may ressurrect this idea, but at this point, removing it simplifies the code. For now, only the schedule specific bits are allowed to be added for a new schedule, that means that 'clockid', 'num_tc', 'map' and 'queues' cannot be modified. Example: $ tc qdisc change dev IFACE parent root handle 100 taprio \ base-time $BASE_TIME \ sched-entry S 00 500000 \ sched-entry S 0f 500000 \ clockid CLOCK_TAI The only change in the netlink API introduced by this change is the introduction of an "admin" type in the response to a dump request, that type allows userspace to separate the "oper" schedule from the "admin" schedule. If userspace doesn't support the "admin" type, it will only display the "oper" schedule. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 06:48:31 +08:00
.change = taprio_change,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
.destroy = taprio_destroy,
net/sched: sch_taprio: reset child qdiscs before freeing them syzkaller shows that packets can still be dequeued while taprio_destroy() is running. Let sch_taprio use the reset() function to cancel the advance timer and drop all skbs from the child qdiscs. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17 02:33:29 +08:00
.reset = taprio_reset,
net: taprio offload: enforce qdisc to netdev queue mapping Even though the taprio qdisc is designed for multiqueue devices, all the queues still point to the same top-level taprio qdisc. This works and is probably required for software taprio, but at least with offload taprio, it has an undesirable side effect: because the whole qdisc is run when a packet has to be sent, it allows packets in a best-effort class to be processed in the context of a task sending higher priority traffic. If there are packets left in the qdisc after that first run, the NET_TX softirq is raised and gets executed immediately in the same process context. As with any other softirq, it runs up to 10 times and for up to 2ms, during which the calling process is waiting for the sendmsg call (or similar) to return. In my use case, that calling process is a real-time task scheduled to send a packet every 2ms, so the long sendmsg calls are leading to missed timeslots. By attaching each netdev queue to its own qdisc, as it is done with the "classic" mq qdisc, each traffic class can be processed independently without touching the other classes. A high-priority process can then send packets without getting stuck in the sendmsg call anymore. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12 01:18:29 +08:00
.attach = taprio_attach,
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
.peek = taprio_peek,
.dequeue = taprio_dequeue,
.enqueue = taprio_enqueue,
.dump = taprio_dump,
.owner = THIS_MODULE,
};
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
static struct notifier_block taprio_device_notifier = {
.notifier_call = taprio_dev_notifier,
};
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
static int __init taprio_module_init(void)
{
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
int err = register_netdevice_notifier(&taprio_device_notifier);
if (err)
return err;
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
return register_qdisc(&taprio_qdisc_ops);
}
static void __exit taprio_module_exit(void)
{
unregister_qdisc(&taprio_qdisc_ops);
net/sched: taprio: fix picos_per_byte miscalculation The Time Aware Priority Scheduler is heavily dependent to link speed, it relies on it to calculate transmission bytes per cycle, we can't properly calculate the so called budget if the device has failed to report the link speed. In that case we can't dequeue packets assuming a wrong budget. This patch makes sure we fail to dequeue case: 1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver failed to set the ksettings' speed value (setting link speed to SPEED_UNKNOWN). Additionally we re calculate the budget whenever the link speed is changed. Fixes: 5a781ccbd19e4 ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Reviewed-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09 01:12:17 +08:00
unregister_netdevice_notifier(&taprio_device_notifier);
tc: Add support for configuring the taprio scheduler This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29 08:59:43 +08:00
}
module_init(taprio_module_init);
module_exit(taprio_module_exit);
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink