linux/drivers/s390/char/sclp_cmd.c

665 lines
15 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 2007,2012
*
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
* Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
#define KMSG_COMPONENT "sclp_cmd"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/memory.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/ctl_reg.h>
#include <asm/chpid.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/sclp.h>
#include <asm/numa.h>
#include "sclp.h"
static void sclp_sync_callback(struct sclp_req *req, void *data)
{
struct completion *completion = data;
complete(completion);
}
int sclp_sync_request(sclp_cmdw_t cmd, void *sccb)
{
return sclp_sync_request_timeout(cmd, sccb, 0);
}
int sclp_sync_request_timeout(sclp_cmdw_t cmd, void *sccb, int timeout)
{
struct completion completion;
struct sclp_req *request;
int rc;
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (!request)
return -ENOMEM;
if (timeout)
request->queue_timeout = timeout;
request->command = cmd;
request->sccb = sccb;
request->status = SCLP_REQ_FILLED;
request->callback = sclp_sync_callback;
request->callback_data = &completion;
init_completion(&completion);
/* Perform sclp request. */
rc = sclp_add_request(request);
if (rc)
goto out;
wait_for_completion(&completion);
/* Check response. */
if (request->status != SCLP_REQ_DONE) {
pr_warn("sync request failed (cmd=0x%08x, status=0x%02x)\n",
cmd, request->status);
rc = -EIO;
}
out:
kfree(request);
return rc;
}
/*
* CPU configuration related functions.
*/
#define SCLP_CMDW_CONFIGURE_CPU 0x00110001
#define SCLP_CMDW_DECONFIGURE_CPU 0x00100001
int _sclp_get_core_info(struct sclp_core_info *info)
{
int rc;
struct read_cpu_info_sccb *sccb;
if (!SCLP_HAS_CPU_INFO)
return -EOPNOTSUPP;
sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
sccb->header.length = sizeof(*sccb);
rc = sclp_sync_request_timeout(SCLP_CMDW_READ_CPU_INFO, sccb,
SCLP_QUEUE_INTERVAL);
if (rc)
goto out;
if (sccb->header.response_code != 0x0010) {
pr_warn("readcpuinfo failed (response=0x%04x)\n",
sccb->header.response_code);
rc = -EIO;
goto out;
}
sclp_fill_core_info(info, sccb);
out:
free_page((unsigned long) sccb);
return rc;
}
struct cpu_configure_sccb {
struct sccb_header header;
} __attribute__((packed, aligned(8)));
static int do_core_configure(sclp_cmdw_t cmd)
{
struct cpu_configure_sccb *sccb;
int rc;
if (!SCLP_HAS_CPU_RECONFIG)
return -EOPNOTSUPP;
/*
* This is not going to cross a page boundary since we force
* kmalloc to have a minimum alignment of 8 bytes on s390.
*/
sccb = kzalloc(sizeof(*sccb), GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
sccb->header.length = sizeof(*sccb);
rc = sclp_sync_request_timeout(cmd, sccb, SCLP_QUEUE_INTERVAL);
if (rc)
goto out;
switch (sccb->header.response_code) {
case 0x0020:
case 0x0120:
break;
default:
pr_warn("configure cpu failed (cmd=0x%08x, response=0x%04x)\n",
cmd, sccb->header.response_code);
rc = -EIO;
break;
}
out:
kfree(sccb);
return rc;
}
int sclp_core_configure(u8 core)
{
return do_core_configure(SCLP_CMDW_CONFIGURE_CPU | core << 8);
}
int sclp_core_deconfigure(u8 core)
{
return do_core_configure(SCLP_CMDW_DECONFIGURE_CPU | core << 8);
}
#ifdef CONFIG_MEMORY_HOTPLUG
static DEFINE_MUTEX(sclp_mem_mutex);
static LIST_HEAD(sclp_mem_list);
static u8 sclp_max_storage_id;
static DECLARE_BITMAP(sclp_storage_ids, 256);
static int sclp_mem_state_changed;
struct memory_increment {
struct list_head list;
u16 rn;
int standby;
};
struct assign_storage_sccb {
struct sccb_header header;
u16 rn;
} __packed;
int arch_get_memory_phys_device(unsigned long start_pfn)
{
if (!sclp.rzm)
return 0;
return PFN_PHYS(start_pfn) >> ilog2(sclp.rzm);
}
static unsigned long long rn2addr(u16 rn)
{
return (unsigned long long) (rn - 1) * sclp.rzm;
}
static int do_assign_storage(sclp_cmdw_t cmd, u16 rn)
{
struct assign_storage_sccb *sccb;
int rc;
sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
sccb->header.length = PAGE_SIZE;
sccb->rn = rn;
rc = sclp_sync_request_timeout(cmd, sccb, SCLP_QUEUE_INTERVAL);
if (rc)
goto out;
switch (sccb->header.response_code) {
case 0x0020:
case 0x0120:
break;
default:
pr_warn("assign storage failed (cmd=0x%08x, response=0x%04x, rn=0x%04x)\n",
cmd, sccb->header.response_code, rn);
rc = -EIO;
break;
}
out:
free_page((unsigned long) sccb);
return rc;
}
static int sclp_assign_storage(u16 rn)
{
unsigned long long start;
int rc;
rc = do_assign_storage(0x000d0001, rn);
if (rc)
return rc;
start = rn2addr(rn);
storage_key_init_range(start, start + sclp.rzm);
return 0;
}
static int sclp_unassign_storage(u16 rn)
{
return do_assign_storage(0x000c0001, rn);
}
struct attach_storage_sccb {
struct sccb_header header;
u16 :16;
u16 assigned;
u32 :32;
u32 entries[0];
} __packed;
static int sclp_attach_storage(u8 id)
{
struct attach_storage_sccb *sccb;
int rc;
int i;
sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
sccb->header.length = PAGE_SIZE;
sccb->header.function_code = 0x40;
rc = sclp_sync_request_timeout(0x00080001 | id << 8, sccb,
SCLP_QUEUE_INTERVAL);
if (rc)
goto out;
switch (sccb->header.response_code) {
case 0x0020:
set_bit(id, sclp_storage_ids);
for (i = 0; i < sccb->assigned; i++) {
if (sccb->entries[i])
sclp_unassign_storage(sccb->entries[i] >> 16);
}
break;
default:
rc = -EIO;
break;
}
out:
free_page((unsigned long) sccb);
return rc;
}
static int sclp_mem_change_state(unsigned long start, unsigned long size,
int online)
{
struct memory_increment *incr;
unsigned long long istart;
int rc = 0;
list_for_each_entry(incr, &sclp_mem_list, list) {
istart = rn2addr(incr->rn);
if (start + size - 1 < istart)
break;
if (start > istart + sclp.rzm - 1)
continue;
if (online)
rc |= sclp_assign_storage(incr->rn);
else
sclp_unassign_storage(incr->rn);
if (rc == 0)
incr->standby = online ? 0 : 1;
}
return rc ? -EIO : 0;
}
static bool contains_standby_increment(unsigned long start, unsigned long end)
{
struct memory_increment *incr;
unsigned long istart;
list_for_each_entry(incr, &sclp_mem_list, list) {
istart = rn2addr(incr->rn);
if (end - 1 < istart)
continue;
if (start > istart + sclp.rzm - 1)
continue;
if (incr->standby)
return true;
}
return false;
}
static int sclp_mem_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
unsigned long start, size;
struct memory_notify *arg;
unsigned char id;
int rc = 0;
arg = data;
start = arg->start_pfn << PAGE_SHIFT;
size = arg->nr_pages << PAGE_SHIFT;
mutex_lock(&sclp_mem_mutex);
for_each_clear_bit(id, sclp_storage_ids, sclp_max_storage_id + 1)
sclp_attach_storage(id);
switch (action) {
case MEM_GOING_OFFLINE:
/*
* We do not allow to set memory blocks offline that contain
* standby memory. This is done to simplify the "memory online"
* case.
*/
if (contains_standby_increment(start, start + size))
rc = -EPERM;
break;
case MEM_ONLINE:
case MEM_CANCEL_OFFLINE:
break;
case MEM_GOING_ONLINE:
rc = sclp_mem_change_state(start, size, 1);
break;
case MEM_CANCEL_ONLINE:
sclp_mem_change_state(start, size, 0);
break;
case MEM_OFFLINE:
sclp_mem_change_state(start, size, 0);
break;
default:
rc = -EINVAL;
break;
}
if (!rc)
sclp_mem_state_changed = 1;
mutex_unlock(&sclp_mem_mutex);
return rc ? NOTIFY_BAD : NOTIFY_OK;
}
static struct notifier_block sclp_mem_nb = {
.notifier_call = sclp_mem_notifier,
};
static void __init align_to_block_size(unsigned long long *start,
unsigned long long *size,
unsigned long long alignment)
{
unsigned long long start_align, size_align;
start_align = roundup(*start, alignment);
size_align = rounddown(*start + *size, alignment) - start_align;
pr_info("Standby memory at 0x%llx (%lluM of %lluM usable)\n",
*start, size_align >> 20, *size >> 20);
*start = start_align;
*size = size_align;
}
static void __init add_memory_merged(u16 rn)
{
unsigned long long start, size, addr, block_size;
static u16 first_rn, num;
if (rn && first_rn && (first_rn + num == rn)) {
num++;
return;
}
if (!first_rn)
goto skip_add;
start = rn2addr(first_rn);
size = (unsigned long long) num * sclp.rzm;
if (start >= VMEM_MAX_PHYS)
goto skip_add;
if (start + size > VMEM_MAX_PHYS)
size = VMEM_MAX_PHYS - start;
if (memory_end_set && (start >= memory_end))
goto skip_add;
if (memory_end_set && (start + size > memory_end))
size = memory_end - start;
block_size = memory_block_size_bytes();
align_to_block_size(&start, &size, block_size);
if (!size)
goto skip_add;
for (addr = start; addr < start + size; addr += block_size)
add_memory(numa_pfn_to_nid(PFN_DOWN(addr)), addr, block_size);
skip_add:
first_rn = rn;
num = 1;
}
static void __init sclp_add_standby_memory(void)
{
struct memory_increment *incr;
list_for_each_entry(incr, &sclp_mem_list, list)
if (incr->standby)
add_memory_merged(incr->rn);
add_memory_merged(0);
}
static void __init insert_increment(u16 rn, int standby, int assigned)
{
struct memory_increment *incr, *new_incr;
struct list_head *prev;
u16 last_rn;
new_incr = kzalloc(sizeof(*new_incr), GFP_KERNEL);
if (!new_incr)
return;
new_incr->rn = rn;
new_incr->standby = standby;
last_rn = 0;
prev = &sclp_mem_list;
list_for_each_entry(incr, &sclp_mem_list, list) {
if (assigned && incr->rn > rn)
break;
if (!assigned && incr->rn - last_rn > 1)
break;
last_rn = incr->rn;
prev = &incr->list;
}
if (!assigned)
new_incr->rn = last_rn + 1;
if (new_incr->rn > sclp.rnmax) {
kfree(new_incr);
return;
}
list_add(&new_incr->list, prev);
}
static int sclp_mem_freeze(struct device *dev)
{
if (!sclp_mem_state_changed)
return 0;
pr_err("Memory hotplug state changed, suspend refused.\n");
return -EPERM;
}
static const struct dev_pm_ops sclp_mem_pm_ops = {
.freeze = sclp_mem_freeze,
};
static struct platform_driver sclp_mem_pdrv = {
.driver = {
.name = "sclp_mem",
.pm = &sclp_mem_pm_ops,
},
};
static int __init sclp_detect_standby_memory(void)
{
struct platform_device *sclp_pdev;
struct read_storage_sccb *sccb;
int i, id, assigned, rc;
if (OLDMEM_BASE) /* No standby memory in kdump mode */
return 0;
if ((sclp.facilities & 0xe00000000000ULL) != 0xe00000000000ULL)
return 0;
rc = -ENOMEM;
sccb = (void *) __get_free_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
goto out;
assigned = 0;
for (id = 0; id <= sclp_max_storage_id; id++) {
memset(sccb, 0, PAGE_SIZE);
sccb->header.length = PAGE_SIZE;
rc = sclp_sync_request(SCLP_CMDW_READ_STORAGE_INFO | id << 8, sccb);
if (rc)
goto out;
switch (sccb->header.response_code) {
case 0x0010:
set_bit(id, sclp_storage_ids);
for (i = 0; i < sccb->assigned; i++) {
if (!sccb->entries[i])
continue;
assigned++;
insert_increment(sccb->entries[i] >> 16, 0, 1);
}
break;
case 0x0310:
break;
case 0x0410:
for (i = 0; i < sccb->assigned; i++) {
if (!sccb->entries[i])
continue;
assigned++;
insert_increment(sccb->entries[i] >> 16, 1, 1);
}
break;
default:
rc = -EIO;
break;
}
if (!rc)
sclp_max_storage_id = sccb->max_id;
}
if (rc || list_empty(&sclp_mem_list))
goto out;
for (i = 1; i <= sclp.rnmax - assigned; i++)
insert_increment(0, 1, 0);
rc = register_memory_notifier(&sclp_mem_nb);
if (rc)
goto out;
rc = platform_driver_register(&sclp_mem_pdrv);
if (rc)
goto out;
sclp_pdev = platform_device_register_simple("sclp_mem", -1, NULL, 0);
rc = PTR_ERR_OR_ZERO(sclp_pdev);
if (rc)
goto out_driver;
sclp_add_standby_memory();
goto out;
out_driver:
platform_driver_unregister(&sclp_mem_pdrv);
out:
free_page((unsigned long) sccb);
return rc;
}
__initcall(sclp_detect_standby_memory);
#endif /* CONFIG_MEMORY_HOTPLUG */
/*
* Channel path configuration related functions.
*/
#define SCLP_CMDW_CONFIGURE_CHPATH 0x000f0001
#define SCLP_CMDW_DECONFIGURE_CHPATH 0x000e0001
#define SCLP_CMDW_READ_CHPATH_INFORMATION 0x00030001
struct chp_cfg_sccb {
struct sccb_header header;
u8 ccm;
u8 reserved[6];
u8 cssid;
} __attribute__((packed));
static int do_chp_configure(sclp_cmdw_t cmd)
{
struct chp_cfg_sccb *sccb;
int rc;
if (!SCLP_HAS_CHP_RECONFIG)
return -EOPNOTSUPP;
/* Prepare sccb. */
sccb = (struct chp_cfg_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
sccb->header.length = sizeof(*sccb);
rc = sclp_sync_request(cmd, sccb);
if (rc)
goto out;
switch (sccb->header.response_code) {
case 0x0020:
case 0x0120:
case 0x0440:
case 0x0450:
break;
default:
pr_warn("configure channel-path failed (cmd=0x%08x, response=0x%04x)\n",
cmd, sccb->header.response_code);
rc = -EIO;
break;
}
out:
free_page((unsigned long) sccb);
return rc;
}
/**
* sclp_chp_configure - perform configure channel-path sclp command
* @chpid: channel-path ID
*
* Perform configure channel-path command sclp command for specified chpid.
* Return 0 after command successfully finished, non-zero otherwise.
*/
int sclp_chp_configure(struct chp_id chpid)
{
return do_chp_configure(SCLP_CMDW_CONFIGURE_CHPATH | chpid.id << 8);
}
/**
* sclp_chp_deconfigure - perform deconfigure channel-path sclp command
* @chpid: channel-path ID
*
* Perform deconfigure channel-path command sclp command for specified chpid
* and wait for completion. On success return 0. Return non-zero otherwise.
*/
int sclp_chp_deconfigure(struct chp_id chpid)
{
return do_chp_configure(SCLP_CMDW_DECONFIGURE_CHPATH | chpid.id << 8);
}
struct chp_info_sccb {
struct sccb_header header;
u8 recognized[SCLP_CHP_INFO_MASK_SIZE];
u8 standby[SCLP_CHP_INFO_MASK_SIZE];
u8 configured[SCLP_CHP_INFO_MASK_SIZE];
u8 ccm;
u8 reserved[6];
u8 cssid;
} __attribute__((packed));
/**
* sclp_chp_read_info - perform read channel-path information sclp command
* @info: resulting channel-path information data
*
* Perform read channel-path information sclp command and wait for completion.
* On success, store channel-path information in @info and return 0. Return
* non-zero otherwise.
*/
int sclp_chp_read_info(struct sclp_chp_info *info)
{
struct chp_info_sccb *sccb;
int rc;
if (!SCLP_HAS_CHP_INFO)
return -EOPNOTSUPP;
/* Prepare sccb. */
sccb = (struct chp_info_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
sccb->header.length = sizeof(*sccb);
rc = sclp_sync_request(SCLP_CMDW_READ_CHPATH_INFORMATION, sccb);
if (rc)
goto out;
if (sccb->header.response_code != 0x0010) {
pr_warn("read channel-path info failed (response=0x%04x)\n",
sccb->header.response_code);
rc = -EIO;
goto out;
}
memcpy(info->recognized, sccb->recognized, SCLP_CHP_INFO_MASK_SIZE);
memcpy(info->standby, sccb->standby, SCLP_CHP_INFO_MASK_SIZE);
memcpy(info->configured, sccb->configured, SCLP_CHP_INFO_MASK_SIZE);
out:
free_page((unsigned long) sccb);
return rc;
}