linux/include/net/flow.h

196 lines
5.0 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
*
* Generic internet FLOW.
*
*/
#ifndef _NET_FLOW_H
#define _NET_FLOW_H
#include <linux/in6.h>
#include <linux/atomic.h>
#include <linux/container_of.h>
#include <linux/uidgid.h>
struct flow_keys;
/*
* ifindex generation is per-net namespace, and loopback is
* always the 1st device in ns (see net_dev_init), thus any
* loopback device should get ifindex 1
*/
#define LOOPBACK_IFINDEX 1
struct flowi_tunnel {
__be64 tun_id;
};
struct flowi_common {
int flowic_oif;
int flowic_iif;
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15 04:45:51 +08:00
int flowic_l3mdev;
__u32 flowic_mark;
__u8 flowic_tos;
__u8 flowic_scope;
__u8 flowic_proto;
__u8 flowic_flags;
#define FLOWI_FLAG_ANYSRC 0x01
#define FLOWI_FLAG_KNOWN_NH 0x02
__u32 flowic_secid;
kuid_t flowic_uid;
__u32 flowic_multipath_hash;
struct flowi_tunnel flowic_tun_key;
};
union flowi_uli {
struct {
__be16 dport;
__be16 sport;
} ports;
struct {
__u8 type;
__u8 code;
} icmpt;
__be32 gre_key;
struct {
__u8 type;
} mht;
};
struct flowi4 {
struct flowi_common __fl_common;
#define flowi4_oif __fl_common.flowic_oif
#define flowi4_iif __fl_common.flowic_iif
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15 04:45:51 +08:00
#define flowi4_l3mdev __fl_common.flowic_l3mdev
#define flowi4_mark __fl_common.flowic_mark
#define flowi4_tos __fl_common.flowic_tos
#define flowi4_scope __fl_common.flowic_scope
#define flowi4_proto __fl_common.flowic_proto
#define flowi4_flags __fl_common.flowic_flags
#define flowi4_secid __fl_common.flowic_secid
#define flowi4_tun_key __fl_common.flowic_tun_key
#define flowi4_uid __fl_common.flowic_uid
#define flowi4_multipath_hash __fl_common.flowic_multipath_hash
/* (saddr,daddr) must be grouped, same order as in IP header */
__be32 saddr;
__be32 daddr;
union flowi_uli uli;
#define fl4_sport uli.ports.sport
#define fl4_dport uli.ports.dport
#define fl4_icmp_type uli.icmpt.type
#define fl4_icmp_code uli.icmpt.code
#define fl4_mh_type uli.mht.type
#define fl4_gre_key uli.gre_key
} __attribute__((__aligned__(BITS_PER_LONG/8)));
static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
__u32 mark, __u8 tos, __u8 scope,
__u8 proto, __u8 flags,
__be32 daddr, __be32 saddr,
__be16 dport, __be16 sport,
kuid_t uid)
{
fl4->flowi4_oif = oif;
fl4->flowi4_iif = LOOPBACK_IFINDEX;
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15 04:45:51 +08:00
fl4->flowi4_l3mdev = 0;
fl4->flowi4_mark = mark;
fl4->flowi4_tos = tos;
fl4->flowi4_scope = scope;
fl4->flowi4_proto = proto;
fl4->flowi4_flags = flags;
fl4->flowi4_secid = 0;
fl4->flowi4_tun_key.tun_id = 0;
fl4->flowi4_uid = uid;
fl4->daddr = daddr;
fl4->saddr = saddr;
fl4->fl4_dport = dport;
fl4->fl4_sport = sport;
fl4->flowi4_multipath_hash = 0;
}
/* Reset some input parameters after previous lookup */
static inline void flowi4_update_output(struct flowi4 *fl4, int oif,
__be32 daddr, __be32 saddr)
{
fl4->flowi4_oif = oif;
fl4->daddr = daddr;
fl4->saddr = saddr;
}
struct flowi6 {
struct flowi_common __fl_common;
#define flowi6_oif __fl_common.flowic_oif
#define flowi6_iif __fl_common.flowic_iif
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15 04:45:51 +08:00
#define flowi6_l3mdev __fl_common.flowic_l3mdev
#define flowi6_mark __fl_common.flowic_mark
#define flowi6_scope __fl_common.flowic_scope
#define flowi6_proto __fl_common.flowic_proto
#define flowi6_flags __fl_common.flowic_flags
#define flowi6_secid __fl_common.flowic_secid
#define flowi6_tun_key __fl_common.flowic_tun_key
#define flowi6_uid __fl_common.flowic_uid
struct in6_addr daddr;
struct in6_addr saddr;
/* Note: flowi6_tos is encoded in flowlabel, too. */
__be32 flowlabel;
union flowi_uli uli;
#define fl6_sport uli.ports.sport
#define fl6_dport uli.ports.dport
#define fl6_icmp_type uli.icmpt.type
#define fl6_icmp_code uli.icmpt.code
#define fl6_mh_type uli.mht.type
#define fl6_gre_key uli.gre_key
__u32 mp_hash;
} __attribute__((__aligned__(BITS_PER_LONG/8)));
struct flowi {
union {
struct flowi_common __fl_common;
struct flowi4 ip4;
struct flowi6 ip6;
} u;
#define flowi_oif u.__fl_common.flowic_oif
#define flowi_iif u.__fl_common.flowic_iif
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15 04:45:51 +08:00
#define flowi_l3mdev u.__fl_common.flowic_l3mdev
#define flowi_mark u.__fl_common.flowic_mark
#define flowi_tos u.__fl_common.flowic_tos
#define flowi_scope u.__fl_common.flowic_scope
#define flowi_proto u.__fl_common.flowic_proto
#define flowi_flags u.__fl_common.flowic_flags
#define flowi_secid u.__fl_common.flowic_secid
#define flowi_tun_key u.__fl_common.flowic_tun_key
#define flowi_uid u.__fl_common.flowic_uid
} __attribute__((__aligned__(BITS_PER_LONG/8)));
static inline struct flowi *flowi4_to_flowi(struct flowi4 *fl4)
{
return container_of(fl4, struct flowi, u.ip4);
}
static inline struct flowi_common *flowi4_to_flowi_common(struct flowi4 *fl4)
{
flow: fix object-size-mismatch warning in flowi{4,6}_to_flowi_common() Commit 3df98d79215ace13 ("lsm,selinux: pass flowi_common instead of flowi to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04. ================================================================================ UBSAN: object-size-mismatch in ./include/net/flow.h:197:33 member access within address ffffc9000109fbd8 with insufficient space for an object of type 'struct flowi' CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x103/0x171 ubsan_type_mismatch_common+0x1de/0x390 __ubsan_handle_type_mismatch_v1+0x41/0x50 udp_sendmsg+0xda2/0x1300 ? ip_skb_dst_mtu+0x1f0/0x1f0 ? sock_rps_record_flow+0xe/0x200 ? inet_send_prepare+0x2d/0x90 sock_sendmsg+0x49/0x80 ____sys_sendmsg+0x269/0x370 __sys_sendmsg+0x15e/0x1d0 ? syscall_enter_from_user_mode+0xf0/0x1b0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7081a50497 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497 RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28 R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c ================================================================================ I don't think we need to call flowi{4,6}_to_flowi() from these functions because the first member of "struct flowi4" and "struct flowi6" is struct flowi_common __fl_common; while the first member of "struct flowi" is union { struct flowi_common __fl_common; struct flowi4 ip4; struct flowi6 ip6; struct flowidn dn; } u; which should point to the same address without access to "struct flowi". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-02 13:36:17 +08:00
return &(fl4->__fl_common);
}
static inline struct flowi *flowi6_to_flowi(struct flowi6 *fl6)
{
return container_of(fl6, struct flowi, u.ip6);
}
static inline struct flowi_common *flowi6_to_flowi_common(struct flowi6 *fl6)
{
flow: fix object-size-mismatch warning in flowi{4,6}_to_flowi_common() Commit 3df98d79215ace13 ("lsm,selinux: pass flowi_common instead of flowi to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04. ================================================================================ UBSAN: object-size-mismatch in ./include/net/flow.h:197:33 member access within address ffffc9000109fbd8 with insufficient space for an object of type 'struct flowi' CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x103/0x171 ubsan_type_mismatch_common+0x1de/0x390 __ubsan_handle_type_mismatch_v1+0x41/0x50 udp_sendmsg+0xda2/0x1300 ? ip_skb_dst_mtu+0x1f0/0x1f0 ? sock_rps_record_flow+0xe/0x200 ? inet_send_prepare+0x2d/0x90 sock_sendmsg+0x49/0x80 ____sys_sendmsg+0x269/0x370 __sys_sendmsg+0x15e/0x1d0 ? syscall_enter_from_user_mode+0xf0/0x1b0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7081a50497 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497 RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28 R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c ================================================================================ I don't think we need to call flowi{4,6}_to_flowi() from these functions because the first member of "struct flowi4" and "struct flowi6" is struct flowi_common __fl_common; while the first member of "struct flowi" is union { struct flowi_common __fl_common; struct flowi4 ip4; struct flowi6 ip6; struct flowidn dn; } u; which should point to the same address without access to "struct flowi". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-02 13:36:17 +08:00
return &(fl6->__fl_common);
}
__u32 __get_hash_from_flowi6(const struct flowi6 *fl6, struct flow_keys *keys);
#endif