korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-19 00:54:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
db840d389b
linux/kernel/bpf/log.c

387 lines
10 KiB
C
Raw Normal View History

bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
* Copyright (c) 2016 Facebook
* Copyright (c) 2018 Covalent IO, Inc. http://covalent.io
*/
#include <uapi/linux/btf.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/bpf.h>
#include <linux/bpf_verifier.h>
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
#include <linux/math64.h>
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
bpf: move verbose_linfo() into kernel/bpf/log.c verifier.c is huge. Let's try to move out parts that are logging-related into log.c, as we previously did with bpf_log() and other related stuff. This patch moves line info verbose output routines: it's pretty self-contained and isolated code, so there is no problem with this. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231118034623.3320920-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-18 11:46:16 +08:00
#define verbose(env, fmt, args...) bpf_verifier_log_write(env, fmt, ##args)
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
static bool bpf_verifier_log_attr_valid(const struct bpf_verifier_log *log)
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
{
bpf: Relax log_buf NULL conditions when log_level>0 is requested Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
2023-04-07 07:42:00 +08:00
/* ubuf and len_total should both be specified (or not) together */
if (!!log->ubuf != !!log->len_total)
return false;
/* log buf without log_level is meaningless */
if (log->ubuf && log->level == 0)
return false;
if (log->level & ~BPF_LOG_MASK)
return false;
if (log->len_total > UINT_MAX >> 2)
return false;
return true;
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
}
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
int bpf_vlog_init(struct bpf_verifier_log *log, u32 log_level,
char __user *log_buf, u32 log_size)
{
log->level = log_level;
log->ubuf = log_buf;
log->len_total = log_size;
/* log attributes have to be sane */
if (!bpf_verifier_log_attr_valid(log))
return -EINVAL;
return 0;
}
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
static void bpf_vlog_update_len_max(struct bpf_verifier_log *log, u32 add_len)
{
/* add_len includes terminal \0, so no need for +1. */
u64 len = log->end_pos + add_len;
/* log->len_max could be larger than our current len due to
* bpf_vlog_reset() calls, so we maintain the max of any length at any
* previous point
*/
if (len > UINT_MAX)
log->len_max = UINT_MAX;
else if (len > log->len_max)
log->len_max = len;
}
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
void bpf_verifier_vlog(struct bpf_verifier_log *log, const char *fmt,
va_list args)
{
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
u64 cur_pos;
u32 new_n, n;
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
n = vscnprintf(log->kbuf, BPF_VERIFIER_TMP_LOG_SIZE, fmt, args);
if (log->level == BPF_LOG_KERNEL) {
bool newline = n > 0 && log->kbuf[n - 1] == '\n';
pr_err("BPF: %s%s", log->kbuf, newline ? "" : "\n");
return;
}
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
n += 1; /* include terminating zero */
bpf_vlog_update_len_max(log, n);
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
if (log->level & BPF_LOG_FIXED) {
/* check if we have at least something to put into user buf */
new_n = 0;
if (log->end_pos < log->len_total) {
new_n = min_t(u32, log->len_total - log->end_pos, n);
log->kbuf[new_n - 1] = '\0';
}
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
cur_pos = log->end_pos;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
log->end_pos += n - 1; /* don't count terminating '\0' */
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
if (log->ubuf && new_n &&
copy_to_user(log->ubuf + cur_pos, log->kbuf, new_n))
goto fail;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
} else {
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
u64 new_end, new_start;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
u32 buf_start, buf_end, new_n;
new_end = log->end_pos + n;
if (new_end - log->start_pos >= log->len_total)
new_start = new_end - log->len_total;
else
new_start = log->start_pos;
bpf: Relax log_buf NULL conditions when log_level>0 is requested Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
2023-04-07 07:42:00 +08:00
log->start_pos = new_start;
log->end_pos = new_end - 1; /* don't count terminating '\0' */
if (!log->ubuf)
return;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
new_n = min(n, log->len_total);
cur_pos = new_end - new_n;
div_u64_rem(cur_pos, log->len_total, &buf_start);
div_u64_rem(new_end, log->len_total, &buf_end);
/* new_end and buf_end are exclusive indices, so if buf_end is
* exactly zero, then it actually points right to the end of
* ubuf and there is no wrap around
*/
if (buf_end == 0)
buf_end = log->len_total;
/* if buf_start > buf_end, we wrapped around;
* if buf_start == buf_end, then we fill ubuf completely; we
* can't have buf_start == buf_end to mean that there is
* nothing to write, because we always write at least
* something, even if terminal '\0'
*/
if (buf_start < buf_end) {
/* message fits within contiguous chunk of ubuf */
if (copy_to_user(log->ubuf + buf_start,
log->kbuf + n - new_n,
buf_end - buf_start))
goto fail;
} else {
/* message wraps around the end of ubuf, copy in two chunks */
if (copy_to_user(log->ubuf + buf_start,
log->kbuf + n - new_n,
log->len_total - buf_start))
goto fail;
if (copy_to_user(log->ubuf,
log->kbuf + n - buf_end,
buf_end))
goto fail;
}
}
return;
fail:
log->ubuf = NULL;
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
}
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
void bpf_vlog_reset(struct bpf_verifier_log *log, u64 new_pos)
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
{
char zero = 0;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
u32 pos;
if (WARN_ON_ONCE(new_pos > log->end_pos))
return;
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
bpf: Ignore verifier log reset in BPF_LOG_KERNEL mode Verifier log position reset is meaningless in BPF_LOG_KERNEL mode, so just exit early in bpf_vlog_reset() if log->level is BPF_LOG_KERNEL. This avoid meaningless put_user() into NULL log->ubuf. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-8-andrii@kernel.org
2023-04-07 07:41:53 +08:00
if (!bpf_verifier_log_needed(log) || log->level == BPF_LOG_KERNEL)
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
return;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
/* if position to which we reset is beyond current log window,
* then we didn't preserve any useful content and should adjust
* start_pos to end up with an empty log (start_pos == end_pos)
*/
log->end_pos = new_pos;
if (log->end_pos < log->start_pos)
log->start_pos = log->end_pos;
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
bpf: Relax log_buf NULL conditions when log_level>0 is requested Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
2023-04-07 07:42:00 +08:00
if (!log->ubuf)
return;
bpf: Keep track of total log content size in both fixed and rolling modes Change how we do accounting in BPF_LOG_FIXED mode and adopt log->end_pos as *logical* log position. This means that we can go beyond physical log buffer size now and be able to tell what log buffer size should be to fit entire log contents without -ENOSPC. To do this for BPF_LOG_FIXED mode, we need to remove a short-circuiting logic of not vsnprintf()'ing further log content once we filled up user-provided buffer, which is done by bpf_verifier_log_needed() checks. We modify these checks to always keep going if log->level is non-zero (i.e., log is requested), even if log->ubuf was NULL'ed out due to copying data to user-space, or if entire log buffer is physically full. We adopt bpf_verifier_vlog() routine to work correctly with log->ubuf == NULL condition, performing log formatting into temporary kernel buffer, doing all the necessary accounting, but just avoiding copying data out if buffer is full or NULL'ed out. With these changes, it's now possible to do this sort of determination of log contents size in both BPF_LOG_FIXED and default rolling log mode. We need to keep in mind bpf_vlog_reset(), though, which shrinks log contents after successful verification of a particular code path. This log reset means that log->end_pos isn't always increasing, so to return back to users what should be the log buffer size to fit all log content without causing -ENOSPC even in the presence of log resetting, we need to keep maximum over "lifetime" of logging. We do this accounting in bpf_vlog_update_len_max() helper. A related and subtle aspect is that with this logical log->end_pos even in BPF_LOG_FIXED mode we could temporary "overflow" buffer, but then reset it back with bpf_vlog_reset() to a position inside user-supplied log_buf. In such situation we still want to properly maintain terminating zero. We will eventually return -ENOSPC even if final log buffer is small (we detect this through log->len_max check). This behavior is simpler to reason about and is consistent with current behavior of verifier log. Handling of this required a small addition to bpf_vlog_reset() logic to avoid doing put_user() beyond physical log buffer dimensions. Another issue to keep in mind is that we limit log buffer size to 32-bit value and keep such log length as u32, but theoretically verifier could produce huge log stretching beyond 4GB. Instead of keeping (and later returning) 64-bit log length, we cap it at UINT_MAX. Current UAPI makes it impossible to specify log buffer size bigger than 4GB anyways, so we don't really loose anything here and keep everything consistently 32-bit in UAPI. This property will be utilized in next patch. Doing the same determination of maximum log buffer for rolling mode is trivial, as log->end_pos and log->start_pos are already logical positions, so there is nothing new there. These changes do incidentally fix one small issue with previous logging logic. Previously, if use provided log buffer of size N, and actual log output was exactly N-1 bytes + terminating \0, kernel logic coun't distinguish this condition from log truncation scenario which would end up with truncated log contents of N-1 bytes + terminating \0 as well. But now with log->end_pos being logical position that could go beyond actual log buffer size, we can distinguish these two conditions, which we do in this patch. This plays nicely with returning log_size_actual (implemented in UAPI in the next patch), as we can now guarantee that if user takes such log_size_actual and provides log buffer of that exact size, they will not get -ENOSPC in return. All in all, all these changes do conceptually unify fixed and rolling log modes much better, and allow a nice feature requested by users: knowing what should be the size of the buffer to avoid -ENOSPC. We'll plumb this through the UAPI and the code in the next patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-12-andrii@kernel.org
2023-04-07 07:41:57 +08:00
if (log->level & BPF_LOG_FIXED)
pos = log->end_pos + 1;
else
div_u64_rem(new_pos, log->len_total, &pos);
bpf: Relax log_buf NULL conditions when log_level>0 is requested Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
2023-04-07 07:42:00 +08:00
if (pos < log->len_total && put_user(zero, log->ubuf + pos))
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
log->ubuf = NULL;
}
static void bpf_vlog_reverse_kbuf(char *buf, int len)
{
int i, j;
for (i = 0, j = len - 1; i < j; i++, j--)
swap(buf[i], buf[j]);
}
static int bpf_vlog_reverse_ubuf(struct bpf_verifier_log *log, int start, int end)
{
/* we split log->kbuf into two equal parts for both ends of array */
int n = sizeof(log->kbuf) / 2, nn;
char *lbuf = log->kbuf, *rbuf = log->kbuf + n;
/* Read ubuf's section [start, end) two chunks at a time, from left
* and right side; within each chunk, swap all the bytes; after that
* reverse the order of lbuf and rbuf and write result back to ubuf.
* This way we'll end up with swapped contents of specified
* [start, end) ubuf segment.
*/
while (end - start > 1) {
nn = min(n, (end - start ) / 2);
if (copy_from_user(lbuf, log->ubuf + start, nn))
return -EFAULT;
if (copy_from_user(rbuf, log->ubuf + end - nn, nn))
return -EFAULT;
bpf_vlog_reverse_kbuf(lbuf, nn);
bpf_vlog_reverse_kbuf(rbuf, nn);
/* we write lbuf to the right end of ubuf, while rbuf to the
* left one to end up with properly reversed overall ubuf
*/
if (copy_to_user(log->ubuf + start, rbuf, nn))
return -EFAULT;
if (copy_to_user(log->ubuf + end - nn, lbuf, nn))
return -EFAULT;
start += nn;
end -= nn;
}
return 0;
}
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
int bpf_vlog_finalize(struct bpf_verifier_log *log, u32 *log_size_actual)
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
{
u32 sublen;
int err;
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
*log_size_actual = 0;
if (!log || log->level == 0 || log->level == BPF_LOG_KERNEL)
return 0;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
if (!log->ubuf)
goto skip_log_rotate;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
/* If we never truncated log, there is nothing to move around. */
bpf: Relax log_buf NULL conditions when log_level>0 is requested Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
2023-04-07 07:42:00 +08:00
if (log->start_pos == 0)
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
goto skip_log_rotate;
bpf: Switch BPF verifier log to be a rotating log by default Currently, if user-supplied log buffer to collect BPF verifier log turns out to be too small to contain full log, bpf() syscall returns -ENOSPC, fails BPF program verification/load, and preserves first N-1 bytes of the verifier log (where N is the size of user-supplied buffer). This is problematic in a bunch of common scenarios, especially when working with real-world BPF programs that tend to be pretty complex as far as verification goes and require big log buffers. Typically, it's when debugging tricky cases at log level 2 (verbose). Also, when BPF program is successfully validated, log level 2 is the only way to actually see verifier state progression and all the important details. Even with log level 1, it's possible to get -ENOSPC even if the final verifier log fits in log buffer, if there is a code path that's deep enough to fill up entire log, even if normally it would be reset later on (there is a logic to chop off successfully validated portions of BPF verifier log). In short, it's not always possible to pre-size log buffer. Also, what's worse, in practice, the end of the log most often is way more important than the beginning, but verifier stops emitting log as soon as initial log buffer is filled up. This patch switches BPF verifier log behavior to effectively behave as rotating log. That is, if user-supplied log buffer turns out to be too short, verifier will keep overwriting previously written log, effectively treating user's log buffer as a ring buffer. -ENOSPC is still going to be returned at the end, to notify user that log contents was truncated, but the important last N bytes of the log would be returned, which might be all that user really needs. This consistent -ENOSPC behavior, regardless of rotating or fixed log behavior, allows to prevent backwards compatibility breakage. The only user-visible change is which portion of verifier log user ends up seeing *if buffer is too small*. Given contents of verifier log itself is not an ABI, there is no breakage due to this behavior change. Specialized tools that rely on specific contents of verifier log in -ENOSPC scenario are expected to be easily adapted to accommodate old and new behaviors. Importantly, though, to preserve good user experience and not require every user-space application to adopt to this new behavior, before exiting to user-space verifier will rotate log (in place) to make it start at the very beginning of user buffer as a continuous zero-terminated string. The contents will be a chopped off N-1 last bytes of full verifier log, of course. Given beginning of log is sometimes important as well, we add BPF_LOG_FIXED (which equals 8) flag to force old behavior, which allows tools like veristat to request first part of verifier log, if necessary. BPF_LOG_FIXED flag is also a simple and straightforward way to check if BPF verifier supports rotating behavior. On the implementation side, conceptually, it's all simple. We maintain 64-bit logical start and end positions. If we need to truncate the log, start position will be adjusted accordingly to lag end position by N bytes. We then use those logical positions to calculate their matching actual positions in user buffer and handle wrap around the end of the buffer properly. Finally, right before returning from bpf_check(), we rotate user log buffer contents in-place as necessary, to make log contents contiguous. See comments in relevant functions for details. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-4-andrii@kernel.org
2023-04-07 07:41:49 +08:00
/* Otherwise we need to rotate log contents to make it start from the
* buffer beginning and be a continuous zero-terminated string. Note
* that if log->start_pos != 0 then we definitely filled up entire log
* buffer with no gaps, and we just need to shift buffer contents to
* the left by (log->start_pos % log->len_total) bytes.
*
* Unfortunately, user buffer could be huge and we don't want to
* allocate temporary kernel memory of the same size just to shift
* contents in a straightforward fashion. Instead, we'll be clever and
* do in-place array rotation. This is a leetcode-style problem, which
* could be solved by three rotations.
*
* Let's say we have log buffer that has to be shifted left by 7 bytes
* (spaces and vertical bar is just for demonstrative purposes):
* E F G H I J K | A B C D
*
* First, we reverse entire array:
* D C B A | K J I H G F E
*
* Then we rotate first 4 bytes (DCBA) and separately last 7 bytes
* (KJIHGFE), resulting in a properly rotated array:
* A B C D | E F G H I J K
*
* We'll utilize log->kbuf to read user memory chunk by chunk, swap
* bytes, and write them back. Doing it byte-by-byte would be
* unnecessarily inefficient. Altogether we are going to read and
* write each byte twice, for total 4 memory copies between kernel and
* user space.
*/
/* length of the chopped off part that will be the beginning;
* len(ABCD) in the example above
*/
div_u64_rem(log->start_pos, log->len_total, &sublen);
sublen = log->len_total - sublen;
err = bpf_vlog_reverse_ubuf(log, 0, log->len_total);
err = err ?: bpf_vlog_reverse_ubuf(log, 0, sublen);
err = err ?: bpf_vlog_reverse_ubuf(log, sublen, log->len_total);
if (err)
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
log->ubuf = NULL;
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
skip_log_rotate:
*log_size_actual = log->len_max;
/* properly initialized log has either both ubuf!=NULL and len_total>0
* or ubuf==NULL and len_total==0, so if this condition doesn't hold,
* we got a fault somewhere along the way, so report it back
*/
if (!!log->ubuf != !!log->len_total)
return -EFAULT;
bpf: Relax log_buf NULL conditions when log_level>0 is requested Drop the log_size>0 and log_buf!=NULL condition when log_level>0. This allows users to request log_true_size of a full log without providing actual (even if small) log buffer. Verifier log handling code was mostly ready to handle NULL log->ubuf, so only few small changes were necessary to prevent NULL log->ubuf from causing problems. Note, that if user provided NULL log_buf with log_level>0 we don't consider this a log truncation, and thus won't return -ENOSPC. We also enforce that either (log_buf==NULL && log_size==0) or (log_buf!=NULL && log_size>0). Suggested-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-15-andrii@kernel.org
2023-04-07 07:42:00 +08:00
/* did truncation actually happen? */
if (log->ubuf && log->len_max > log->len_total)
bpf: Simplify internal verifier log interface Simplify internal verifier log API down to bpf_vlog_init() and bpf_vlog_finalize(). The former handles input arguments validation in one place and makes it easier to change it. The latter subsumes -ENOSPC (truncation) and -EFAULT handling and simplifies both caller's code (bpf_check() and btf_parse()). For btf_parse(), this patch also makes sure that verifier log finalization happens even if there is some error condition during BTF verification process prior to normal finalization step. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-14-andrii@kernel.org
2023-04-07 07:41:59 +08:00
return -ENOSPC;
return 0;
bpf: Split off basic BPF verifier log into separate file kernel/bpf/verifier.c file is large and growing larger all the time. So it's good to start splitting off more or less self-contained parts into separate files to keep source code size (somewhat) somewhat under control. This patch is a one step in this direction, moving some of BPF verifier log routines into a separate kernel/bpf/log.c. Right now it's most low-level and isolated routines to append data to log, reset log to previous position, etc. Eventually we could probably move verifier state printing logic here as well, but this patch doesn't attempt to do that yet. Subsequent patches will add more logic to verifier log management, so having basics in a separate file will make sure verifier.c doesn't grow more with new changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/bpf/20230406234205.323208-2-andrii@kernel.org
2023-04-07 07:41:47 +08:00
}
/* log_level controls verbosity level of eBPF verifier.
* bpf_verifier_log_write() is used to dump the verification trace to the log,
* so the user can figure out what's wrong with the program
*/
__printf(2, 3) void bpf_verifier_log_write(struct bpf_verifier_env *env,
const char *fmt, ...)
{
va_list args;
if (!bpf_verifier_log_needed(&env->log))
return;
va_start(args, fmt);
bpf_verifier_vlog(&env->log, fmt, args);
va_end(args);
}
EXPORT_SYMBOL_GPL(bpf_verifier_log_write);
__printf(2, 3) void bpf_log(struct bpf_verifier_log *log,
const char *fmt, ...)
{
va_list args;
if (!bpf_verifier_log_needed(log))
return;
va_start(args, fmt);
bpf_verifier_vlog(log, fmt, args);
va_end(args);
}
EXPORT_SYMBOL_GPL(bpf_log);
bpf: move verbose_linfo() into kernel/bpf/log.c verifier.c is huge. Let's try to move out parts that are logging-related into log.c, as we previously did with bpf_log() and other related stuff. This patch moves line info verbose output routines: it's pretty self-contained and isolated code, so there is no problem with this. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231118034623.3320920-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-18 11:46:16 +08:00
static const struct bpf_line_info *
find_linfo(const struct bpf_verifier_env *env, u32 insn_off)
{
const struct bpf_line_info *linfo;
const struct bpf_prog *prog;
u32 i, nr_linfo;
prog = env->prog;
nr_linfo = prog->aux->nr_linfo;
if (!nr_linfo || insn_off >= prog->len)
return NULL;
linfo = prog->aux->linfo;
for (i = 1; i < nr_linfo; i++)
if (insn_off < linfo[i].insn_off)
break;
return &linfo[i - 1];
}
static const char *ltrim(const char *s)
{
while (isspace(*s))
s++;
return s;
}
__printf(3, 4) void verbose_linfo(struct bpf_verifier_env *env,
u32 insn_off,
const char *prefix_fmt, ...)
{
const struct bpf_line_info *linfo;
if (!bpf_verifier_log_needed(&env->log))
return;
linfo = find_linfo(env, insn_off);
if (!linfo || linfo == env->prev_linfo)
return;
if (prefix_fmt) {
va_list args;
va_start(args, prefix_fmt);
bpf_verifier_vlog(&env->log, prefix_fmt, args);
va_end(args);
}
verbose(env, "%s\n",
ltrim(btf_name_by_offset(env->prog->aux->btf,
linfo->line_off)));
env->prev_linfo = linfo;
}
Reference in New Issue Copy Permalink