linux/arch/arm/boot/dts/da850.dtsi

/*
 * Copyright 2012 DENX Software Engineering GmbH
 * Heiko Schocher <hs@denx.de>
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */
/include/ "skeleton.dtsi"

/ {
	arm {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		intc: interrupt-controller {
			compatible = "ti,cp-intc";
			interrupt-controller;
			#interrupt-cells = <1>;
			ti,intc-size = <100>;
			reg = <0xfffee000 0x2000>;
		};
	};
	soc {
		compatible = "simple-bus";
		model = "da850";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x01c00000 0x400000>;
		interrupt-parent = <&intc>;

		pmx_core: pinmux@1c14120 {
			compatible = "pinctrl-single";
			reg = <0x14120 0x50>;
			#address-cells = <1>;
			#size-cells = <0>;
			pinctrl-single,bit-per-mux;
			pinctrl-single,register-width = <32>;
			pinctrl-single,function-mask = <0xffffffff>;
			status = "disabled";

			nand_cs3_pins: pinmux_nand_pins {
				pinctrl-single,bits = <
					/* EMA_OE, EMA_WE */
					0x1c 0x00110000  0x00ff0000
					/* EMA_CS[4],EMA_CS[3]*/
					0x1c 0x00000110  0x00000ff0
					/*
					 * EMA_D[0], EMA_D[1], EMA_D[2],
					 * EMA_D[3], EMA_D[4], EMA_D[5],
					 * EMA_D[6], EMA_D[7]
					 */
					0x24 0x11111111  0xffffffff
					/* EMA_A[1], EMA_A[2] */
					0x30 0x01100000  0x0ff00000
				>;
			};
			i2c0_pins: pinmux_i2c0_pins {
				pinctrl-single,bits = <
					/* I2C0_SDA,I2C0_SCL */
					0x10 0x00002200 0x0000ff00
				>;
			};
			mmc0_pins: pinmux_mmc_pins {
				pinctrl-single,bits = <
					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
					 * MMCSD0_CMD    MMCSD0_CLK
					 */
					0x28 0x00222222  0x00ffffff
				>;
			};
		};
		serial0: serial@1c42000 {
			compatible = "ns16550a";
			reg = <0x42000 0x100>;
			clock-frequency = <150000000>;
			reg-shift = <2>;
			interrupts = <25>;
			status = "disabled";
		};
		serial1: serial@1d0c000 {
			compatible = "ns16550a";
			reg = <0x10c000 0x100>;
			clock-frequency = <150000000>;
			reg-shift = <2>;
			interrupts = <53>;
			status = "disabled";
		};
		serial2: serial@1d0d000 {
			compatible = "ns16550a";
			reg = <0x10d000 0x100>;
			clock-frequency = <150000000>;
			reg-shift = <2>;
			interrupts = <61>;
			status = "disabled";
		};
		rtc0: rtc@1c23000 {
			compatible = "ti,da830-rtc";
			reg = <0x23000 0x1000>;
			interrupts = <19
				      19>;
			status = "disabled";
		};
		i2c0: i2c@1c22000 {
			compatible = "ti,davinci-i2c";
			reg = <0x22000 0x1000>;
			interrupts = <15>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		wdt: wdt@1c21000 {
			compatible = "ti,davinci-wdt";
			reg = <0x21000 0x1000>;
			status = "disabled";
		};
		mmc0: mmc@1c40000 {
			compatible = "ti,da830-mmc";
			reg = <0x40000 0x1000>;
			interrupts = <16>;
			status = "disabled";
		};
	};
	nand_cs3@62000000 {
		compatible = "ti,davinci-nand";
		reg = <0x62000000 0x807ff
		       0x68000000 0x8000>;
		ti,davinci-chipselect = <1>;
		ti,davinci-mask-ale = <0>;
		ti,davinci-mask-cle = <0>;
		ti,davinci-mask-chipsel = <0>;
		ti,davinci-ecc-mode = "hw";
		ti,davinci-ecc-bits = <4>;
		ti,davinci-nand-use-bbt;
		status = "disabled";
	};
};