korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 08:44:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
d9f1f61c08
linux/drivers/net/Makefile

77 lines
2.0 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
drivers/net/ethernet: Add ethernet dir and config option This is the initial patch to organize the drivers/net directory structure and networking device driver config options. This patch does the following: - add drivers/net/ethernet/Kconfig - integrate the new files into the existing config Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-30 09:25:21 +08:00
# Makefile for the Linux network device drivers.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
#
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
# Networking Core Drivers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_BONDING) += bonding/
ipvlan: Initial check-in of the IPVLAN driver. This driver is very similar to the macvlan driver except that it uses L3 on the frame to determine the logical interface while functioning as packet dispatcher. It inherits L2 of the master device hence the packets on wire will have the same L2 for all the packets originating from all virtual devices off of the same master device. This driver was developed keeping the namespace use-case in mind. Hence most of the examples given here take that as the base setup where main-device belongs to the default-ns and virtual devices are assigned to the additional namespaces. The device operates in two different modes and the difference in these two modes in primarily in the TX side. (a) L2 mode : In this mode, the device behaves as a L2 device. TX processing upto L2 happens on the stack of the virtual device associated with (namespace). Packets are switched after that into the main device (default-ns) and queued for xmit. RX processing is simple and all multicast, broadcast (if applicable), and unicast belonging to the address(es) are delivered to the virtual devices. (b) L3 mode : In this mode, the device behaves like a L3 device. TX processing upto L3 happens on the stack of the virtual device associated with (namespace). Packets are switched to the main-device (default-ns) for the L2 processing. Hence the routing table of the default-ns will be used in this mode. RX processins is somewhat similar to the L2 mode except that in this mode only Unicast packets are delivered to the virtual device while main-dev will handle all other packets. The devices can be added using the "ip" command from the iproute2 package - ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ] Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Laurent Chavey <chavey@google.com> Cc: Tim Hockin <thockin@google.com> Cc: Brandon Philips <brandon.philips@coreos.com> Cc: Pavel Emelianov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24 15:07:46 +08:00
obj-$(CONFIG_IPVLAN) += ipvlan/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_DUMMY) += dummy.o
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_EQUALIZER) += eql.o
[NET]: Add IFB (Intermediate Functional Block) network device. A new device to do intermidiate functional block in a system shared manner. To use the new functionality, you need to turn on qos/classifier actions. The new functionality can be grouped as: 1) qdiscs/policies that are per device as opposed to system wide. ifb allows for a device which can be redirected to thus providing an impression of sharing. 2) Allows for queueing incoming traffic for shaping instead of dropping. Packets are redirected to this device using tc/action mirred redirect construct. If they are sent to it by plain routing instead then they will merely be dropped and the stats would indicate that. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-09 14:34:25 +08:00
obj-$(CONFIG_IFB) += ifb.o
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-12 01:07:33 +08:00
obj-$(CONFIG_MACSEC) += macsec.o
[NET]: Add macvlan driver Add macvlan driver, which allows to create virtual ethernet devices based on MAC address. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-15 09:55:06 +08:00
obj-$(CONFIG_MACVLAN) += macvlan.o
net: macvtap driver In order to use macvlan with qemu and other tools that require a tap file descriptor, the macvtap driver adds a small backend with a character device with the same interface as the tun driver, with a minimum set of features. Macvtap interfaces are created in the same way as macvlan interfaces using ip link, but the netif is just used as a handle for configuration and accounting, while the data goes through the chardev. Each macvtap interface has its own character device, simplifying permission management significantly over the generic tun/tap driver. Cc: Patrick McHardy <kaber@trash.net> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: David S. Miller" <davem@davemloft.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Or Gerlitz <ogerlitz@voltaire.com> Cc: netdev@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-30 20:24:26 +08:00
obj-$(CONFIG_MACVTAP) += macvtap.o
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_RIONET) += rionet.o
net: introduce ethernet teaming device This patch introduces new network device called team. It supposes to be very fast, simple, userspace-driven alternative to existing bonding driver. Userspace library called libteam with couple of demo apps is available here: https://github.com/jpirko/libteam Note it's still in its dipers atm. team<->libteam use generic netlink for communication. That and rtnl suppose to be the only way to configure team device, no sysfs etc. Python binding of libteam was recently introduced. Daemon providing arpmon/miimon active-backup functionality will be introduced shortly. All what's necessary is already implemented in kernel team driver. v7->v8: - check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling them. - use dev_kfree_skb_any() instead of dev_kfree_skb() v6->v7: - transmit and receive functions are not checked in hot paths. That also resolves memory leak on transmit when no port is present v5->v6: - changed couple of _rcu calls to non _rcu ones in non-readers v4->v5: - team_change_mtu() uses team->lock while travesing though port list - mac address changes are moved completely to jurisdiction of userspace daemon. This way the daemon can do FOM1, FOM2 and possibly other weird things with mac addresses. Only round-robin mode sets up all ports to bond's address then enslaved. - Extended Kconfig text v3->v4: - remove redundant synchronize_rcu from __team_change_mode() - revert "set and clear of mode_ops happens per pointer, not per byte" - extend comment of function __team_change_mode() v2->v3: - team_change_mtu() uses rcu version of list traversal to unwind - set and clear of mode_ops happens per pointer, not per byte - port hashlist changed to be embedded into team structure - error branch in team_port_enter() does cleanup now - fixed rtln->rtnl v1->v2: - modes are made as modules. Makes team more modular and extendable. - several commenters' nitpicks found on v1 were fixed - several other bugs were fixed. - note I ignored Eric's comment about roundrobin port selector as Eric's way may be easily implemented as another mode (mode "random") in future. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12 06:16:48 +08:00
obj-$(CONFIG_NET_TEAM) += team/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_TUN) += tun.o
[NET]: Virtual ethernet device driver. Veth stands for Virtual ETHernet. It is a simple tunnel driver that works at the link layer and looks like a pair of ethernet devices interconnected with each other. Mainly it allows to communicate between network namespaces but it can be used as is as well. The newlink callback is organized that way to make it easy to create the peer device in the separate namespace when we have them in kernel. This implementation uses another interface - the RTM_NRELINK message introduced by Patric. Bug fixes from Daniel Lezcano. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 07:14:46 +08:00
obj-$(CONFIG_VETH) += veth.o
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
vxlan: virtual extensible lan This is an implementation of Virtual eXtensible Local Area Network as described in draft RFC: http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02 The driver integrates a Virtual Tunnel Endpoint (VTEP) functionality that learns MAC to IP address mapping. This implementation has not been tested only against the Linux userspace implementation using TAP, not against other vendor's equipment. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01 20:32:35 +08:00
obj-$(CONFIG_VXLAN) += vxlan.o
geneve: add initial netdev driver for GENEVE tunnels This is an initial implementation of a netdev driver for GENEVE tunnels. This implementation uses a fixed UDP port, and only supports point-to-point links with specific partner endpoints. Only IPv4 links are supported at this time. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 00:57:30 +08:00
obj-$(CONFIG_GENEVE) += geneve.o
gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U) This is an initial implementation of a netdev driver for GTP datapath (GTP-U) v0 and v1, according to the GSM TS 09.60 and 3GPP TS 29.060 standards. This tunneling protocol is used to prevent subscribers from accessing mobile carrier core network infrastructure. This implementation requires a GGSN userspace daemon that implements the signaling protocol (GTP-C), such as OpenGGSN [1]. This userspace daemon updates the PDP context database that represents active subscriber sessions through a genetlink interface. For more context on this tunneling protocol, you can check the slides that were presented during the NetDev 1.1 [2]. Only IPv4 is supported at this time. [1] http://git.osmocom.org/openggsn/ [2] http://www.netdevconf.org/1.1/proceedings/slides/schultz-welte-osmocom-gtp.pdf Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09 06:55:48 +08:00
obj-$(CONFIG_GTP) += gtp.o
packet: nlmon: virtual netlink monitoring device for packet sockets Currently, there is no good possibility to debug netlink traffic that is being exchanged between kernel and user space. Therefore, this patch implements a netlink virtual device, so that netlink messages will be made visible to PF_PACKET sockets. Once there was an approach with a similar idea [1], but it got forgotten somehow. I think it makes most sense to accept the "overhead" of an extra netlink net device over implementing the same functionality from PF_PACKET sockets once again into netlink sockets. We have BPF filters that can already be easily applied which even have netlink extensions, we have RX_RING zero-copy between kernel- and user space that can be reused, and much more features. So instead of re-implementing all of this, we simply pass the skb to a given PF_PACKET socket for further analysis. Another nice benefit that comes from that is that no code needs to be changed in user space packet analyzers (maybe adding a dissector, but not more), thus out of the box, we can already capture pcap files of netlink traffic to debug/troubleshoot netlink problems. Also thanks goes to Thomas Graf, Flavio Leitner, Jesper Dangaard Brouer. [1] http://marc.info/?l=linux-netdev&m=113813401516110 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-22 01:38:08 +08:00
obj-$(CONFIG_NLMON) += nlmon.o
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-14 04:59:10 +08:00
obj-$(CONFIG_NET_VRF) += vrf.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tap: Refactoring macvtap.c macvtap module has code for tap/queue management and link management. This patch splits the code into macvtap_main.c for link management and tap.c for tap/queue management. Functionality in tap.c can be re-used for implementing tap on other virtual interfaces. Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11 08:03:46 +08:00
macvtap-objs := macvtap_main.o tap.o
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
#
# Networking Drivers
#
obj-$(CONFIG_ARCNET) += arcnet/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_CAIF) += caif/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 01:08:33 +08:00
obj-$(CONFIG_NET_DSA) += dsa/
3c*/acenic/typhoon: Move 3Com Ethernet drivers Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary Kconfig and Makefile changes. Did not move the following drivers becuase they use a non-3Com chipset: 3c503, 3c505, 3c507, 3c523 and 3c527 CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> CC: David Dillow <dave@thedillows.org> CC: Jes Sorensen <jes@trained-monkey.org> CC: Alan Cox <alan@linux.intel.com> CC: David Hinds <dahinds@users.sourceforge.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: David Dillow <dave@thedillows.org>
2011-03-30 18:47:06 +08:00
obj-$(CONFIG_ETHERNET) += ethernet/
fddi: Move the FDDI drivers Move the FDDI drivers into drivers/net/fddi/ and make the necessary Kconfig and Makefile changes. CC: "Maciej W. Rozycki" <macro@linux-mips.org> CC: Christoph Goos <cgoos@syskonnect.de> CC: <linux@syskonnect.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-31 15:06:29 +08:00
obj-$(CONFIG_FDDI) += fddi/
hippi: Move the HIPPI driver Move the HIPPI driver into drivers/net/hippi/ and make the necessary Kconfig and Makefile changes. CC: Jes Sorensen <jes@wildopensource.com> CC: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-02 13:48:13 +08:00
obj-$(CONFIG_HIPPI) += hippi/
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
plip: Move the PLIP driver Move the Parallel Line Internet Protocol (PLIP) driver into drivers/net/plip/ and make the necessary Kconfig and Makefile changes. CC: Niibe Yutaka <gniibe@mri.co.jp> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alan Cox <alan@linux.intel.com>
2011-08-03 18:01:58 +08:00
obj-$(CONFIG_PLIP) += plip/
net: fix Makefile typos & build errors Fix many (randconfig) PPP build errors by fixing typos in drivers/net/Makefile. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30 02:49:40 +08:00
obj-$(CONFIG_PPP) += ppp/
ppp: Move the PPP drivers Move the PPP drivers into drivers/net/ppp/ and make the necessary Kconfig and Makefile changes. CC: Paul Mackerras <paulus@samba.org> CC: Frank Cusack <fcusack@fcusack.com> CC: Michal Ostrowski <mostrows@speakeasy.net> CC: Michal Ostrowski <mostrows@earthlink.net> CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-07-31 17:38:19 +08:00
obj-$(CONFIG_PPP_ASYNC) += ppp/
obj-$(CONFIG_PPP_BSDCOMP) += ppp/
obj-$(CONFIG_PPP_DEFLATE) += ppp/
obj-$(CONFIG_PPP_MPPE) += ppp/
obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
obj-$(CONFIG_PPPOE) += ppp/
obj-$(CONFIG_PPPOL2TP) += ppp/
obj-$(CONFIG_PPTP) += ppp/
net: fix Makefile typos & build errors Fix many (randconfig) PPP build errors by fixing typos in drivers/net/Makefile. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30 02:49:40 +08:00
obj-$(CONFIG_SLIP) += slip/
slip: Move the SLIP drivers Move the Serial Line Internet Protocol (SLIP) drivers into drivers/net/slip/ and make the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alan Cox <alan@linux.intel.com>
2011-08-03 18:17:13 +08:00
obj-$(CONFIG_SLHC) += slip/
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_WAN) += wan/
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_WLAN) += wireless/
obj-$(CONFIG_WIMAX) += wimax/
drivers/ieee802154: move ieee802154 drivers to net folder The IEEE 802.15.4 standard represents a networking protocol. I don't exactly know why drivers for this protocol are stored into the root 'driver' folder, but better will be to store them with other networking stuff. Currently there are only 3 drivers available for IEEE 802.15.4 stack, so lets do it now with the smallest overhead. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-26 13:10:11 +08:00
obj-$(CONFIG_IEEE802154) += ieee802154/
drivers/net: Kconfig & Makefile cleanup The is does a general cleanup of the drivers/net/ Kconfig and Makefile. This patch create a "core" option and places all the networking core drivers into this option (default is yes for this option). In addition, it alphabitizes the Kconfig driver options. As a side cleanup, found that the arcnet, token ring, and PHY Kconfig options were a tri-state option and should have been a bool option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 15:42:10 +08:00
obj-$(CONFIG_VMXNET3) += vmxnet3/
obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
Move USB network drivers to drivers/net/usb. It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-10 09:31:55 +08:00
net: reduce USB network driver config options. USB network drivers are already handled in drivers/net/usb/Kconfig. Let's save the maintenance burden of dependencies in drivers/net/Makefile. The newly introduced USB_NET_DRIVERS umbrella config option defaults to 'y' so as to minimize the changes of behavior. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-06 05:10:52 +08:00
obj-$(CONFIG_USB_NET_DRIVERS) += usb/
staging: hv: move hv_netvsc out of staging area hv_netvsc has been reviewed on netdev mailing list on 6/09/2011. All recommended changes have been made. We are requesting to move it out of staging area. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: Mike Sterling <Mike.Sterling@microsoft.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 05:35:35 +08:00
obj-$(CONFIG_HYPERV_NET) += hyperv/
net: Add support for NTB virtual ethernet device A virtual ethernet device that uses the NTB transport API to send/receive data. Signed-off-by: Jon Mason <jon.mason@intel.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17 10:27:13 +08:00
obj-$(CONFIG_NTB_NETDEV) += ntb_netdev.o
fjes: Introduce FUJITSU Extended Socket Network Device driver This patch adds the basic code of FUJITSU Extended Socket Network Device driver. When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR" to check if "PNP0C02" is for Extended Socket device driver and retrieves ACPI resource information. Then creates platform_device. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21 16:29:17 +08:00
obj-$(CONFIG_FUJITSU_ES) += fjes/
Reference in New Issue Copy Permalink