korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 01:34:14 +08:00
Code Issues Packages Projects Releases Wiki Activity
d9447f768b
linux/drivers/net/phy/sfp.h

36 lines
1.2 KiB
C
Raw Normal View History

sfp: add sfp-bus to bridge between network devices and sfp cages Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:18 +08:00
#ifndef SFP_H
#define SFP_H
#include <linux/ethtool.h>
#include <linux/sfp.h>
struct sfp;
struct sfp_socket_ops {
net: sfp: do not probe SFP module before we're attached When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call. Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06 18:52:30 +08:00
void (*attach)(struct sfp *sfp);
void (*detach)(struct sfp *sfp);
sfp: add sfp-bus to bridge between network devices and sfp cages Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:18 +08:00
void (*start)(struct sfp *sfp);
void (*stop)(struct sfp *sfp);
int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo);
int (*module_eeprom)(struct sfp *sfp, struct ethtool_eeprom *ee,
u8 *data);
phy: sfp: add netlink SFP support to generic SFP code The new netlink API for reading SFP data requires a new op to be implemented. The idea of the new netlink SFP code is that userspace is responsible to parsing the EEPROM data and requesting pages, rather than have the kernel decide what pages are interesting and returning them. This allows greater flexibility for newer formats. Currently the generic SFP code only supports simple SFPs. Allow i2c address 0x50 and 0x51 to be accessed with page and bank must always be 0. This interface will later be extended when for example QSFP support is added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09 16:06:40 +08:00
int (*module_eeprom_by_page)(struct sfp *sfp,
const struct ethtool_module_eeprom *page,
struct netlink_ext_ack *extack);
sfp: add sfp-bus to bridge between network devices and sfp cages Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:18 +08:00
};
int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev);
void sfp_remove_phy(struct sfp_bus *bus);
void sfp_link_up(struct sfp_bus *bus);
void sfp_link_down(struct sfp_bus *bus);
int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
void sfp_module_remove(struct sfp_bus *bus);
net: sfp: add module start/stop upstream notifications When dealing with some copper modules, we can't positively know the module capabilities are until we have probed the PHY. Without the full capabilities, we may end up failing a module that we could otherwise drive with a restricted set of capabilities. An example of this would be a module with a NBASE-T PHY plugged into a host that supports phy interface modes 2500BASE-X and SGMII. The PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes, which means a subset of the capabilities are compatible with the host. However, reading the module EEPROM leads us to believe that the module only supports ethtool link mode 10GBASE-T, which is incompatible with the host - and thus results in the module being rejected. This patch adds an extra notification which are triggered after the SFP module's PHY probe, and a corresponding notification just before the PHY is removed. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 18:56:09 +08:00
int sfp_module_start(struct sfp_bus *bus);
void sfp_module_stop(struct sfp_bus *bus);
sfp: add sfp-bus to bridge between network devices and sfp cages Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 22:03:18 +08:00
int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
const struct sfp_socket_ops *ops);
void sfp_unregister_socket(struct sfp_bus *bus);
#endif
Reference in New Issue Copy Permalink