linux/drivers/gpu/drm/gma500/mdfld_dsi_output.c

/*
 * Copyright © 2010 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 * jim liu <jim.liu@intel.com>
 * Jackie Li<yaodong.li@intel.com>
 */

#include <linux/module.h>

#include "mdfld_dsi_output.h"
#include "mdfld_dsi_dpi.h"
#include "mdfld_output.h"
#include "mdfld_dsi_pkg_sender.h"
#include "tc35876x-dsi-lvds.h"
#include <linux/pm_runtime.h>
#include <asm/intel_scu_ipc.h>

/* get the LABC from command line. */
static int LABC_control = 1;

#ifdef MODULE
module_param(LABC_control, int, 0644);
#else

static int __init parse_LABC_control(char *arg)
{
	/* LABC control can be passed in as a cmdline parameter */
	/* to enable this feature add LABC=1 to cmdline */
	/* to disable this feature add LABC=0 to cmdline */
	if (!arg)
		return -EINVAL;

	if (!strcasecmp(arg, "0"))
		LABC_control = 0;
	else if (!strcasecmp(arg, "1"))
		LABC_control = 1;

	return 0;
}
early_param("LABC", parse_LABC_control);
#endif

/**
 * Check and see if the generic control or data buffer is empty and ready.
 */
void mdfld_dsi_gen_fifo_ready(struct drm_device *dev, u32 gen_fifo_stat_reg,
							u32 fifo_stat)
{
	u32 GEN_BF_time_out_count;

	/* Check MIPI Adatper command registers */
	for (GEN_BF_time_out_count = 0;
			GEN_BF_time_out_count < GEN_FB_TIME_OUT;
			GEN_BF_time_out_count++) {
		if ((REG_READ(gen_fifo_stat_reg) & fifo_stat) == fifo_stat)
			break;
		udelay(100);
	}

	if (GEN_BF_time_out_count == GEN_FB_TIME_OUT)
		DRM_ERROR("mdfld_dsi_gen_fifo_ready, Timeout. gen_fifo_stat_reg = 0x%x.\n",
					gen_fifo_stat_reg);
}

/**
 * Manage the DSI MIPI keyboard and display brightness.
 * FIXME: this is exported to OSPM code. should work out an specific
 * display interface to OSPM.
 */

void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe)
{
	struct mdfld_dsi_pkg_sender *sender =
				mdfld_dsi_get_pkg_sender(dsi_config);
	struct drm_device *dev = sender->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 gen_ctrl_val;

	if (!sender) {
		DRM_ERROR("No sender found\n");
		return;
	}

	/* Set default display backlight value to 85% (0xd8)*/
	mdfld_dsi_send_mcs_short(sender, write_display_brightness, 0xd8, 1,
				true);

	/* Set minimum brightness setting of CABC function to 20% (0x33)*/
	mdfld_dsi_send_mcs_short(sender, write_cabc_min_bright, 0x33, 1, true);

	/* Enable backlight or/and LABC */
	gen_ctrl_val = BRIGHT_CNTL_BLOCK_ON | DISPLAY_DIMMING_ON |
								BACKLIGHT_ON;
	if (LABC_control == 1)
		gen_ctrl_val |= DISPLAY_DIMMING_ON | DISPLAY_BRIGHTNESS_AUTO
								| GAMMA_AUTO;

	if (LABC_control == 1)
		gen_ctrl_val |= AMBIENT_LIGHT_SENSE_ON;

	dev_priv->mipi_ctrl_display = gen_ctrl_val;

	mdfld_dsi_send_mcs_short(sender, write_ctrl_display, (u8)gen_ctrl_val,
				1, true);

	mdfld_dsi_send_mcs_short(sender, write_ctrl_cabc, UI_IMAGE, 1, true);
}

void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level)
{
	struct mdfld_dsi_pkg_sender *sender;
	struct drm_psb_private *dev_priv;
	struct mdfld_dsi_config *dsi_config;
	u32 gen_ctrl_val = 0;
	int p_type = TMD_VID;

	if (!dev || (pipe != 0 && pipe != 2)) {
		DRM_ERROR("Invalid parameter\n");
		return;
	}

	p_type = mdfld_get_panel_type(dev, 0);

	dev_priv = dev->dev_private;

	if (pipe)
		dsi_config = dev_priv->dsi_configs[1];
	else
		dsi_config = dev_priv->dsi_configs[0];

	sender = mdfld_dsi_get_pkg_sender(dsi_config);

	if (!sender) {
		DRM_ERROR("No sender found\n");
		return;
	}

	gen_ctrl_val = (level * 0xff / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff;

	dev_dbg(sender->dev->dev, "pipe = %d, gen_ctrl_val = %d.\n",
							pipe, gen_ctrl_val);

	if (p_type == TMD_VID) {
		/* Set display backlight value */
		mdfld_dsi_send_mcs_short(sender, tmd_write_display_brightness,
					(u8)gen_ctrl_val, 1, true);
	} else {
		/* Set display backlight value */
		mdfld_dsi_send_mcs_short(sender, write_display_brightness,
					(u8)gen_ctrl_val, 1, true);

		/* Enable backlight control */
		if (level == 0)
			gen_ctrl_val = 0;
		else
			gen_ctrl_val = dev_priv->mipi_ctrl_display;

		mdfld_dsi_send_mcs_short(sender, write_ctrl_display,
					(u8)gen_ctrl_val, 1, true);
	}
}

static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config,
				u8 dcs, u32 *data, bool hs)
{
	struct mdfld_dsi_pkg_sender *sender
		= mdfld_dsi_get_pkg_sender(dsi_config);

	if (!sender || !data) {
		DRM_ERROR("Invalid parameter\n");
		return -EINVAL;
	}

	return mdfld_dsi_read_mcs(sender, dcs, data, 1, hs);
}

int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, u32 *mode,
			bool hs)
{
	if (!dsi_config || !mode) {
		DRM_ERROR("Invalid parameter\n");
		return -EINVAL;
	}

	return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, hs);
}

/*
 * NOTE: this function was used by OSPM.
 * TODO: will be removed later, should work out display interfaces for OSPM
 */
void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe)
{
	if (!dsi_config || ((pipe != 0) && (pipe != 2))) {
		DRM_ERROR("Invalid parameters\n");
		return;
	}

	mdfld_dsi_dpi_controller_init(dsi_config, pipe);
}

static void mdfld_dsi_connector_save(struct drm_connector *connector)
{
}

static void mdfld_dsi_connector_restore(struct drm_connector *connector)
{
}

/* FIXME: start using the force parameter */
static enum drm_connector_status
mdfld_dsi_connector_detect(struct drm_connector *connector, bool force)
{
	struct mdfld_dsi_connector *dsi_connector
		= mdfld_dsi_connector(connector);

	dsi_connector->status = connector_status_connected;

	return dsi_connector->status;
}

static int mdfld_dsi_connector_set_property(struct drm_connector *connector,
				struct drm_property *property,
				uint64_t value)
{
	struct drm_encoder *encoder = connector->encoder;
	struct backlight_device *psb_bd;

	if (!strcmp(property->name, "scaling mode") && encoder) {
		struct psb_intel_crtc *psb_crtc =
					to_psb_intel_crtc(encoder->crtc);
		bool centerechange;
		uint64_t val;

		if (!psb_crtc)
			goto set_prop_error;

		switch (value) {
		case DRM_MODE_SCALE_FULLSCREEN:
			break;
		case DRM_MODE_SCALE_NO_SCALE:
			break;
		case DRM_MODE_SCALE_ASPECT:
			break;
		default:
			goto set_prop_error;
		}

		if (drm_connector_property_get_value(connector, property, &val))
			goto set_prop_error;

		if (val == value)
			goto set_prop_done;

		if (drm_connector_property_set_value(connector,
							property, value))
			goto set_prop_error;

		centerechange = (val == DRM_MODE_SCALE_NO_SCALE) ||
			(value == DRM_MODE_SCALE_NO_SCALE);

		if (psb_crtc->saved_mode.hdisplay != 0 &&
		    psb_crtc->saved_mode.vdisplay != 0) {
			if (centerechange) {
				if (!drm_crtc_helper_set_mode(encoder->crtc,
						&psb_crtc->saved_mode,
						encoder->crtc->x,
						encoder->crtc->y,
						encoder->crtc->fb))
					goto set_prop_error;
			} else {
				struct drm_encoder_helper_funcs *funcs =
						encoder->helper_private;
				funcs->mode_set(encoder,
					&psb_crtc->saved_mode,
					&psb_crtc->saved_adjusted_mode);
			}
		}
	} else if (!strcmp(property->name, "backlight") && encoder) {
		if (drm_connector_property_set_value(connector, property,
									value))
			goto set_prop_error;
		else {
			psb_bd = mdfld_get_backlight_device();
			if (psb_bd) {
				psb_bd->props.brightness = value;
				mdfld_set_brightness(psb_bd);
			}
		}
	}
set_prop_done:
	return 0;
set_prop_error:
	return -1;
}

static void mdfld_dsi_connector_destroy(struct drm_connector *connector)
{
	struct mdfld_dsi_connector *dsi_connector =
					mdfld_dsi_connector(connector);
	struct mdfld_dsi_pkg_sender *sender;

	if (!dsi_connector)
		return;
	drm_sysfs_connector_remove(connector);
	drm_connector_cleanup(connector);
	sender = dsi_connector->pkg_sender;
	mdfld_dsi_pkg_sender_destroy(sender);
	kfree(dsi_connector);
}

static int mdfld_dsi_connector_get_modes(struct drm_connector *connector)
{
	struct mdfld_dsi_connector *dsi_connector =
				mdfld_dsi_connector(connector);
	struct mdfld_dsi_config *dsi_config =
				mdfld_dsi_get_config(dsi_connector);
	struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;
	struct drm_display_mode *dup_mode = NULL;
	struct drm_device *dev = connector->dev;

	connector->display_info.min_vfreq = 0;
	connector->display_info.max_vfreq = 200;
	connector->display_info.min_hfreq = 0;
	connector->display_info.max_hfreq = 200;

	if (fixed_mode) {
		dev_dbg(dev->dev, "fixed_mode %dx%d\n",
				fixed_mode->hdisplay, fixed_mode->vdisplay);
		dup_mode = drm_mode_duplicate(dev, fixed_mode);
		drm_mode_probed_add(connector, dup_mode);
		return 1;
	}
	DRM_ERROR("Didn't get any modes!\n");
	return 0;
}

static int mdfld_dsi_connector_mode_valid(struct drm_connector *connector,
						struct drm_display_mode *mode)
{
	struct mdfld_dsi_connector *dsi_connector =
					mdfld_dsi_connector(connector);
	struct mdfld_dsi_config *dsi_config =
					mdfld_dsi_get_config(dsi_connector);
	struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;

	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
		return MODE_NO_DBLESCAN;

	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
		return MODE_NO_INTERLACE;

	/**
	 * FIXME: current DC has no fitting unit, reject any mode setting
	 * request
	 * Will figure out a way to do up-scaling(pannel fitting) later.
	 **/
	if (fixed_mode) {
		if (mode->hdisplay != fixed_mode->hdisplay)
			return MODE_PANEL;

		if (mode->vdisplay != fixed_mode->vdisplay)
			return MODE_PANEL;
	}

	return MODE_OK;
}

static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode)
{
	if (mode == connector->dpms)
		return;

	/*first, execute dpms*/

	drm_helper_connector_dpms(connector, mode);
}

static struct drm_encoder *mdfld_dsi_connector_best_encoder(
				struct drm_connector *connector)
{
	struct mdfld_dsi_connector *dsi_connector =
				mdfld_dsi_connector(connector);
	struct mdfld_dsi_config *dsi_config =
				mdfld_dsi_get_config(dsi_connector);
	return &dsi_config->encoder->base.base;
}

/*DSI connector funcs*/
static const struct drm_connector_funcs mdfld_dsi_connector_funcs = {
	.dpms = /*drm_helper_connector_dpms*/mdfld_dsi_connector_dpms,
	.save = mdfld_dsi_connector_save,
	.restore = mdfld_dsi_connector_restore,
	.detect = mdfld_dsi_connector_detect,
	.fill_modes = drm_helper_probe_single_connector_modes,
	.set_property = mdfld_dsi_connector_set_property,
	.destroy = mdfld_dsi_connector_destroy,
};

/*DSI connector helper funcs*/
static const struct drm_connector_helper_funcs
	mdfld_dsi_connector_helper_funcs = {
	.get_modes = mdfld_dsi_connector_get_modes,
	.mode_valid = mdfld_dsi_connector_mode_valid,
	.best_encoder = mdfld_dsi_connector_best_encoder,
};

static int mdfld_dsi_get_default_config(struct drm_device *dev,
				struct mdfld_dsi_config *config, int pipe)
{
	if (!dev || !config) {
		DRM_ERROR("Invalid parameters");
		return -EINVAL;
	}

	config->bpp = 24;
	if (mdfld_get_panel_type(dev, pipe) == TC35876X)
		config->lane_count = 4;
	else
		config->lane_count = 2;
	config->channel_num = 0;

	if (mdfld_get_panel_type(dev, pipe) == TMD_VID)
		config->video_mode = MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE;
	else if (mdfld_get_panel_type(dev, pipe) == TC35876X)
		config->video_mode =
				MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS;
	else
		config->video_mode = MDFLD_DSI_VIDEO_BURST_MODE;

	return 0;
}

int mdfld_dsi_panel_reset(int pipe)
{
	unsigned gpio;
	int ret = 0;

	switch (pipe) {
	case 0:
		gpio = 128;
		break;
	case 2:
		gpio = 34;
		break;
	default:
		DRM_ERROR("Invalid output\n");
		return -EINVAL;
	}

	ret = gpio_request(gpio, "gfx");
	if (ret) {
		DRM_ERROR("gpio_rqueset failed\n");
		return ret;
	}

	ret = gpio_direction_output(gpio, 1);
	if (ret) {
		DRM_ERROR("gpio_direction_output failed\n");
		goto gpio_error;
	}

	gpio_get_value(128);

gpio_error:
	if (gpio_is_valid(gpio))
		gpio_free(gpio);

	return ret;
}

/*
 * MIPI output init
 * @dev drm device
 * @pipe pipe number. 0 or 2
 * @config
 *
 * Do the initialization of a MIPI output, including create DRM mode objects
 * initialization of DSI output on @pipe
 */
void mdfld_dsi_output_init(struct drm_device *dev,
			   int pipe,
			   const struct panel_funcs *p_vid_funcs)
{
	struct mdfld_dsi_config *dsi_config;
	struct mdfld_dsi_connector *dsi_connector;
	struct drm_connector *connector;
	struct mdfld_dsi_encoder *encoder;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct panel_info dsi_panel_info;
	u32 width_mm, height_mm;

	dev_dbg(dev->dev, "init DSI output on pipe %d\n", pipe);

	if (!dev || ((pipe != 0) && (pipe != 2))) {
		DRM_ERROR("Invalid parameter\n");
		return;
	}

	/*create a new connetor*/
	dsi_connector = kzalloc(sizeof(struct mdfld_dsi_connector), GFP_KERNEL);
	if (!dsi_connector) {
		DRM_ERROR("No memory");
		return;
	}

	dsi_connector->pipe =  pipe;

	dsi_config = kzalloc(sizeof(struct mdfld_dsi_config),
			GFP_KERNEL);
	if (!dsi_config) {
		DRM_ERROR("cannot allocate memory for DSI config\n");
		goto dsi_init_err0;
	}
	mdfld_dsi_get_default_config(dev, dsi_config, pipe);

	dsi_connector->private = dsi_config;

	dsi_config->changed = 1;
	dsi_config->dev = dev;

	dsi_config->fixed_mode = p_vid_funcs->get_config_mode(dev);
	if (p_vid_funcs->get_panel_info(dev, pipe, &dsi_panel_info))
			goto dsi_init_err0;

	width_mm = dsi_panel_info.width_mm;
	height_mm = dsi_panel_info.height_mm;

	dsi_config->mode = dsi_config->fixed_mode;
	dsi_config->connector = dsi_connector;

	if (!dsi_config->fixed_mode) {
		DRM_ERROR("No pannel fixed mode was found\n");
		goto dsi_init_err0;
	}

	if (pipe && dev_priv->dsi_configs[0]) {
		dsi_config->dvr_ic_inited = 0;
		dev_priv->dsi_configs[1] = dsi_config;
	} else if (pipe == 0) {
		dsi_config->dvr_ic_inited = 1;
		dev_priv->dsi_configs[0] = dsi_config;
	} else {
		DRM_ERROR("Trying to init MIPI1 before MIPI0\n");
		goto dsi_init_err0;
	}


	connector = &dsi_connector->base.base;
	drm_connector_init(dev, connector, &mdfld_dsi_connector_funcs,
						DRM_MODE_CONNECTOR_LVDS);
	drm_connector_helper_add(connector, &mdfld_dsi_connector_helper_funcs);

	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
	connector->display_info.width_mm = width_mm;
	connector->display_info.height_mm = height_mm;
	connector->interlace_allowed = false;
	connector->doublescan_allowed = false;

	/*attach properties*/
	drm_connector_attach_property(connector,
				dev->mode_config.scaling_mode_property,
				DRM_MODE_SCALE_FULLSCREEN);
	drm_connector_attach_property(connector,
				dev_priv->backlight_property,
				MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);

	/*init DSI package sender on this output*/
	if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) {
		DRM_ERROR("Package Sender initialization failed on pipe %d\n",
									pipe);
		goto dsi_init_err0;
	}

	encoder = mdfld_dsi_dpi_init(dev, dsi_connector, p_vid_funcs);
	if (!encoder) {
		DRM_ERROR("Create DPI encoder failed\n");
		goto dsi_init_err1;
	}
	encoder->private = dsi_config;
	dsi_config->encoder = encoder;
	encoder->base.type = (pipe == 0) ? INTEL_OUTPUT_MIPI :
		INTEL_OUTPUT_MIPI2;
	drm_sysfs_connector_add(connector);
	return;

	/*TODO: add code to destroy outputs on error*/
dsi_init_err1:
	/*destroy sender*/
	mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender);

	drm_connector_cleanup(connector);

	kfree(dsi_config->fixed_mode);
	kfree(dsi_config);
dsi_init_err0:
	kfree(dsi_connector);
}