linux/arch/x86/kvm/irq.c

170 lines
4.0 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* irq.c: API for in kernel interrupt controller
* Copyright (c) 2007, Intel Corporation.
* Copyright 2009 Red Hat, Inc. and/or its affiliates.
*
* Authors:
* Yaozu (Eddie) Dong <Eddie.dong@intel.com>
*/
x86/kvm: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of kvm where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. Several instances got replaced with moduleparam.h since that was really all that was required for those particular files. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20160714001901.31603-8-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 08:19:00 +08:00
#include <linux/export.h>
#include <linux/kvm_host.h>
#include "irq.h"
#include "i8254.h"
#include "x86.h"
/*
* check if there are pending timer events
* to be processed.
*/
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
if (lapic_in_kernel(vcpu))
return apic_has_pending_timer(vcpu);
return 0;
}
EXPORT_SYMBOL(kvm_cpu_has_pending_timer);
/*
* check if there is a pending userspace external interrupt
*/
static int pending_userspace_extint(struct kvm_vcpu *v)
{
return v->arch.pending_external_vector != -1;
}
/*
* check if there is pending interrupt from
* non-APIC source without intack.
*/
static int kvm_cpu_has_extint(struct kvm_vcpu *v)
{
u8 accept = kvm_apic_accept_pic_intr(v);
if (accept) {
if (irqchip_split(v->kvm))
return pending_userspace_extint(v);
else
return v->kvm->arch.vpic->output;
} else
return 0;
}
/*
* check if there is injectable interrupt:
* when virtual interrupt delivery enabled,
* interrupt from apic will handled by hardware,
* we don't need to check it here.
*/
int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v)
{
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 08:01:31 +08:00
/*
* FIXME: interrupt.injected represents an interrupt that it's
* side-effects have already been applied (e.g. bit from IRR
* already moved to ISR). Therefore, it is incorrect to rely
* on interrupt.injected to know if there is a pending
* interrupt in the user-mode LAPIC.
* This leads to nVMX/nSVM not be able to distinguish
* if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on
* pending interrupt or should re-inject an injected
* interrupt.
*/
if (!lapic_in_kernel(v))
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 08:01:31 +08:00
return v->arch.interrupt.injected;
if (kvm_cpu_has_extint(v))
return 1;
KVM: nVMX: Fix injection to L2 when L1 don't intercept external-interrupts Before each vmentry to guest, vcpu_enter_guest() calls sync_pir_to_irr() which calls vmx_hwapic_irr_update() to update RVI. Currently, vmx_hwapic_irr_update() contains a tweak in case it is called when CPU is running L2 and L1 don't intercept external-interrupts. In that case, code injects interrupt directly into L2 instead of updating RVI. Besides being hacky (wouldn't expect function updating RVI to also inject interrupt), it also doesn't handle this case correctly. The code contains several issues: 1. When code calls kvm_queue_interrupt() it just passes it max_irr which represents the highest IRR currently pending in L1 LAPIC. This is problematic as interrupt was injected to guest but it's bit is still set in LAPIC IRR instead of being cleared from IRR and set in ISR. 2. Code doesn't check if LAPIC PPR is set to accept an interrupt of max_irr priority. It just checks if interrupts are enabled in guest with vmx_interrupt_allowed(). To fix the above issues: 1. Simplify vmx_hwapic_irr_update() to just update RVI. Note that this shouldn't happen when CPU is running L2 (See comment in code). 2. Since now vmx_hwapic_irr_update() only does logic for L1 virtual-interrupt-delivery, inject_pending_event() should be the one responsible for injecting the interrupt directly into L2. Therefore, change kvm_cpu_has_injectable_intr() to check L1 LAPIC when CPU is running L2. 3. Change vmx_sync_pir_to_irr() to set KVM_REQ_EVENT when L1 has a pending injectable interrupt. Fixes: 963fee165660 ("KVM: nVMX: Fix virtual interrupt delivery injection") Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-12-25 00:12:56 +08:00
if (!is_guest_mode(v) && kvm_vcpu_apicv_active(v))
return 0;
return kvm_apic_has_interrupt(v) != -1; /* LAPIC */
}
/*
* check if there is pending interrupt without
* intack.
*/
int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
{
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 08:01:31 +08:00
/*
* FIXME: interrupt.injected represents an interrupt that it's
* side-effects have already been applied (e.g. bit from IRR
* already moved to ISR). Therefore, it is incorrect to rely
* on interrupt.injected to know if there is a pending
* interrupt in the user-mode LAPIC.
* This leads to nVMX/nSVM not be able to distinguish
* if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on
* pending interrupt or should re-inject an injected
* interrupt.
*/
if (!lapic_in_kernel(v))
KVM: x86: Rename interrupt.pending to interrupt.injected For exceptions & NMIs events, KVM code use the following coding convention: *) "pending" represents an event that should be injected to guest at some point but it's side-effects have not yet occurred. *) "injected" represents an event that it's side-effects have already occurred. However, interrupts don't conform to this coding convention. All current code flows mark interrupt.pending when it's side-effects have already taken place (For example, bit moved from LAPIC IRR to ISR). Therefore, it makes sense to just rename interrupt.pending to interrupt.injected. This change follows logic of previous commit 664f8e26b00c ("KVM: X86: Fix loss of exception which has not yet been injected") which changed exception to follow this coding convention as well. It is important to note that in case !lapic_in_kernel(vcpu), interrupt.pending usage was and still incorrect. In this case, interrrupt.pending can only be set using one of the following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that QEMU uses them either to re-set an "interrupt.pending" state it has received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR before sending ioctl to KVM. So it seems that indeed "interrupt.pending" in this case is also suppose to represent "interrupt.injected". However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr() is misusing (now named) interrupt.injected in order to return if there is a pending interrupt. This leads to nVMX/nSVM not be able to distinguish if it should exit from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should re-inject an injected interrupt. Therefore, add a FIXME at these functions for handling this issue. This patch introduce no semantics change. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-23 08:01:31 +08:00
return v->arch.interrupt.injected;
if (kvm_cpu_has_extint(v))
return 1;
return kvm_apic_has_interrupt(v) != -1; /* LAPIC */
}
EXPORT_SYMBOL_GPL(kvm_cpu_has_interrupt);
/*
* Read pending interrupt(from non-APIC source)
* vector and intack.
*/
static int kvm_cpu_get_extint(struct kvm_vcpu *v)
{
if (kvm_cpu_has_extint(v)) {
if (irqchip_split(v->kvm)) {
int vector = v->arch.pending_external_vector;
v->arch.pending_external_vector = -1;
return vector;
} else
return kvm_pic_read_irq(v->kvm); /* PIC */
} else
return -1;
}
/*
* Read pending interrupt vector and intack.
*/
int kvm_cpu_get_interrupt(struct kvm_vcpu *v)
{
int vector;
if (!lapic_in_kernel(v))
return v->arch.interrupt.nr;
vector = kvm_cpu_get_extint(v);
KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use After commit 77b0f5d (KVM: nVMX: Ack and write vector info to intr_info if L1 asks us to), "Acknowledge interrupt on exit" behavior can be emulated. To do so, KVM will ask the APIC for the interrupt vector if during a nested vmexit if VM_EXIT_ACK_INTR_ON_EXIT is set. With APICv, kvm_get_apic_interrupt would return -1 and give the following WARNING: Call Trace: [<ffffffff81493563>] dump_stack+0x49/0x5e [<ffffffff8103f0eb>] warn_slowpath_common+0x7c/0x96 [<ffffffffa059709a>] ? nested_vmx_vmexit+0xa4/0x233 [kvm_intel] [<ffffffff8103f11a>] warn_slowpath_null+0x15/0x17 [<ffffffffa059709a>] nested_vmx_vmexit+0xa4/0x233 [kvm_intel] [<ffffffffa0594295>] ? nested_vmx_exit_handled+0x6a/0x39e [kvm_intel] [<ffffffffa0537931>] ? kvm_apic_has_interrupt+0x80/0xd5 [kvm] [<ffffffffa05972ec>] vmx_check_nested_events+0xc3/0xd3 [kvm_intel] [<ffffffffa051ebe9>] inject_pending_event+0xd0/0x16e [kvm] [<ffffffffa051efa0>] vcpu_enter_guest+0x319/0x704 [kvm] To fix this, we cannot rely on the processor's virtual interrupt delivery, because "acknowledge interrupt on exit" must only update the virtual ISR/PPR/IRR registers (and SVI, which is just a cache of the virtual ISR) but it should not deliver the interrupt through the IDT. Thus, KVM has to deliver the interrupt "by hand", similar to the treatment of EOI in commit fc57ac2c9ca8 (KVM: lapic: sync highest ISR to hardware apic on EOI, 2014-05-14). The patch modifies kvm_cpu_get_interrupt to always acknowledge an interrupt; there are only two callers, and the other is not affected because it is never reached with kvm_apic_vid_enabled() == true. Then it modifies apic_set_isr and apic_clear_irr to update SVI and RVI in addition to the registers. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: "Zhang, Yang Z" <yang.z.zhang@intel.com> Tested-by: Liu, RongrongX <rongrongx.liu@intel.com> Tested-by: Felipe Reyes <freyes@suse.com> Fixes: 77b0f5d67ff2781f36831cba79674c3e97bd7acf Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05 12:42:24 +08:00
if (vector != -1)
return vector; /* PIC */
return kvm_get_apic_interrupt(v); /* APIC */
}
EXPORT_SYMBOL_GPL(kvm_cpu_get_interrupt);
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu)
{
if (lapic_in_kernel(vcpu))
kvm_inject_apic_timer_irqs(vcpu);
}
EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
__kvm_migrate_apic_timer(vcpu);
__kvm_migrate_pit_timer(vcpu);
}
bool kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args)
{
bool resample = args->flags & KVM_IRQFD_FLAG_RESAMPLE;
return resample ? irqchip_kernel(kvm) : irqchip_in_kernel(kvm);
}