ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board.
The SinA33 is a core/SDK development board by Sinlinx. The core board
does not have any connectors or pads, other than the pads used to connect
it to the SDK board.
The core board only has the A33 SoC, 2 RAM chips, an eMMC flash chip,
the AXP223 PMIC, and supporting discrete components. eMMC is optional.
The SDK board has a USB host, USB OTG, volume control and home buttons,
audio input/output jacks, a micro-SD slot, camera and SDIO expansion
headers, an LCD connector, and a GPIO expansion header, which has
UARTs, MIPI DSI and I2C available. Only UART0 is enabled though.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 18:04:03 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2015 Chen-Yu Tsai
|
|
|
|
*
|
|
|
|
* Chen-Yu Tsai <wens@csie.org>
|
|
|
|
*
|
|
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
|
|
* licensing only applies to this file, and not this project as a
|
|
|
|
* whole.
|
|
|
|
*
|
|
|
|
* a) This file is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
|
|
* License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This file is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* Or, alternatively,
|
|
|
|
*
|
|
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
|
|
* obtaining a copy of this software and associated documentation
|
|
|
|
* files (the "Software"), to deal in the Software without
|
|
|
|
* restriction, including without limitation the rights to use,
|
|
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following
|
|
|
|
* conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be
|
|
|
|
* included in all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun8i-a33.dtsi"
|
|
|
|
#include "sunxi-common-regulators.dtsi"
|
|
|
|
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Sinlinx SinA33";
|
|
|
|
compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
serial0 = &uart0;
|
|
|
|
};
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
stdout-path = "serial0:115200n8";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2015-06-02 20:29:12 +08:00
|
|
|
&ehci0 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board.
The SinA33 is a core/SDK development board by Sinlinx. The core board
does not have any connectors or pads, other than the pads used to connect
it to the SDK board.
The core board only has the A33 SoC, 2 RAM chips, an eMMC flash chip,
the AXP223 PMIC, and supporting discrete components. eMMC is optional.
The SDK board has a USB host, USB OTG, volume control and home buttons,
audio input/output jacks, a micro-SD slot, camera and SDIO expansion
headers, an LCD connector, and a GPIO expansion header, which has
UARTs, MIPI DSI and I2C available. Only UART0 is enabled though.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 18:04:03 +08:00
|
|
|
&lradc {
|
|
|
|
vref-supply = <®_vcc3v0>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
button@200 {
|
|
|
|
label = "Volume Up";
|
|
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
|
|
channel = <0>;
|
|
|
|
voltage = <191011>;
|
|
|
|
};
|
|
|
|
|
|
|
|
button@400 {
|
|
|
|
label = "Volume Down";
|
|
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
|
|
channel = <0>;
|
|
|
|
voltage = <391304>;
|
|
|
|
};
|
|
|
|
|
|
|
|
button@600 {
|
|
|
|
label = "Home";
|
|
|
|
linux,code = <KEY_HOME>;
|
|
|
|
channel = <0>;
|
|
|
|
voltage = <600000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&mmc0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
|
|
|
|
vmmc-supply = <®_vcc3v0>;
|
|
|
|
bus-width = <4>;
|
|
|
|
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
|
|
|
|
cd-inverted;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&mmc2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&mmc2_8bit_pins>;
|
|
|
|
vmmc-supply = <®_vcc3v0>;
|
|
|
|
bus-width = <8>;
|
|
|
|
non-removable;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&mmc2_8bit_pins {
|
|
|
|
/* eMMC is missing pull-ups */
|
|
|
|
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
|
2015-06-02 20:29:12 +08:00
|
|
|
&ohci0 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board.
The SinA33 is a core/SDK development board by Sinlinx. The core board
does not have any connectors or pads, other than the pads used to connect
it to the SDK board.
The core board only has the A33 SoC, 2 RAM chips, an eMMC flash chip,
the AXP223 PMIC, and supporting discrete components. eMMC is optional.
The SDK board has a USB host, USB OTG, volume control and home buttons,
audio input/output jacks, a micro-SD slot, camera and SDIO expansion
headers, an LCD connector, and a GPIO expansion header, which has
UARTs, MIPI DSI and I2C available. Only UART0 is enabled though.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 18:04:03 +08:00
|
|
|
&pio {
|
|
|
|
mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
|
|
|
|
allwinner,pins = "PB4";
|
|
|
|
allwinner,function = "gpio_in";
|
|
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
|
|
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart0_pins_b>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
2015-06-02 20:29:12 +08:00
|
|
|
|
|
|
|
&usbphy {
|
|
|
|
status = "okay";
|
|
|
|
usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */
|
|
|
|
};
|