Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
/*
|
|
|
|
|
* drivers/net/ibm_newemac/emac.h
|
|
|
|
|
*
|
|
|
|
|
* Register definitions for PowerPC 4xx on-chip ethernet contoller
|
|
|
|
|
*
|
2007-12-05 08:14:33 +08:00
|
|
|
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
|
|
|
|
|
* <benh@kernel.crashing.org>
|
|
|
|
|
*
|
|
|
|
|
* Based on the arch/ppc version of the driver:
|
|
|
|
|
*
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
* Copyright (c) 2004, 2005 Zultys Technologies.
|
|
|
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
|
|
|
*
|
|
|
|
|
* Based on original work by
|
|
|
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
|
|
|
* Armin Kuster <akuster@mvista.com>
|
|
|
|
|
* Copyright 2002-2004 MontaVista Software Inc.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
|
* option) any later version.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
#ifndef __IBM_NEWEMAC_H
|
|
|
|
|
#define __IBM_NEWEMAC_H
|
|
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
|
ibm_newemac: Parameterize EMAC Multicast Match Handling
Various instances of the EMAC core have varying: 1) number of address
match slots, 2) width of the registers for handling address match slots,
3) number of registers for handling address match slots and 4) base
offset for those registers.
As the driver stands today, it assumes that all EMACs have 4 IAHT and
GAHT 32-bit registers, starting at offset 0x30 from the register base,
with only 16-bits of each used for a total of 64 match slots.
The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4
core. This core has 8 IAHT and GAHT registers, starting at offset 0x80
from the register base, with ALL 32-bits of each used for a total of
256 match slots.
This adds a new compatible device tree entry "emac4sync" and a new,
related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros
and inlines which supply the appropriate parameterized value based on
the presence or absence of the EMAC4SYNC feature.
The code has further been reworked where appropriate to use those macros
and inlines.
In addition, the register size passed to ioremap is now taken from the
device tree:
c4 for EMAC4SYNC cores
74 for EMAC4 cores
70 for EMAC cores
rather than sizeof (emac_regs).
Finally, the device trees have been updated with the appropriate compatible
entries and resource sizes.
This has been tested on an AMCC Haleakala board such that: 1) inbound
ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11
and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from
'haleakala.local' to those same systems in the '.local' domain via MDNS
now work.
Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-08 06:03:11 +08:00
|
|
|
/* EMAC registers Write Access rules */
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
struct emac_regs {
|
ibm_newemac: Parameterize EMAC Multicast Match Handling
Various instances of the EMAC core have varying: 1) number of address
match slots, 2) width of the registers for handling address match slots,
3) number of registers for handling address match slots and 4) base
offset for those registers.
As the driver stands today, it assumes that all EMACs have 4 IAHT and
GAHT 32-bit registers, starting at offset 0x30 from the register base,
with only 16-bits of each used for a total of 64 match slots.
The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4
core. This core has 8 IAHT and GAHT registers, starting at offset 0x80
from the register base, with ALL 32-bits of each used for a total of
256 match slots.
This adds a new compatible device tree entry "emac4sync" and a new,
related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros
and inlines which supply the appropriate parameterized value based on
the presence or absence of the EMAC4SYNC feature.
The code has further been reworked where appropriate to use those macros
and inlines.
In addition, the register size passed to ioremap is now taken from the
device tree:
c4 for EMAC4SYNC cores
74 for EMAC4 cores
70 for EMAC cores
rather than sizeof (emac_regs).
Finally, the device trees have been updated with the appropriate compatible
entries and resource sizes.
This has been tested on an AMCC Haleakala board such that: 1) inbound
ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11
and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from
'haleakala.local' to those same systems in the '.local' domain via MDNS
now work.
Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-08 06:03:11 +08:00
|
|
|
/* Common registers across all EMAC implementations. */
|
|
|
|
|
u32 mr0; /* Special */
|
|
|
|
|
u32 mr1; /* Reset */
|
|
|
|
|
u32 tmr0; /* Special */
|
|
|
|
|
u32 tmr1; /* Special */
|
|
|
|
|
u32 rmr; /* Reset */
|
|
|
|
|
u32 isr; /* Always */
|
|
|
|
|
u32 iser; /* Reset */
|
|
|
|
|
u32 iahr; /* Reset, R, T */
|
|
|
|
|
u32 ialr; /* Reset, R, T */
|
|
|
|
|
u32 vtpid; /* Reset, R, T */
|
|
|
|
|
u32 vtci; /* Reset, R, T */
|
|
|
|
|
u32 ptr; /* Reset, T */
|
|
|
|
|
union {
|
|
|
|
|
/* Registers unique to EMAC4 implementations */
|
|
|
|
|
struct {
|
|
|
|
|
u32 iaht1; /* Reset, R */
|
|
|
|
|
u32 iaht2; /* Reset, R */
|
|
|
|
|
u32 iaht3; /* Reset, R */
|
|
|
|
|
u32 iaht4; /* Reset, R */
|
|
|
|
|
u32 gaht1; /* Reset, R */
|
|
|
|
|
u32 gaht2; /* Reset, R */
|
|
|
|
|
u32 gaht3; /* Reset, R */
|
|
|
|
|
u32 gaht4; /* Reset, R */
|
|
|
|
|
} emac4;
|
|
|
|
|
/* Registers unique to EMAC4SYNC implementations */
|
|
|
|
|
struct {
|
|
|
|
|
u32 mahr; /* Reset, R, T */
|
|
|
|
|
u32 malr; /* Reset, R, T */
|
|
|
|
|
u32 mmahr; /* Reset, R, T */
|
|
|
|
|
u32 mmalr; /* Reset, R, T */
|
|
|
|
|
u32 rsvd0[4];
|
|
|
|
|
} emac4sync;
|
|
|
|
|
} u0;
|
|
|
|
|
/* Common registers across all EMAC implementations. */
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
u32 lsah;
|
|
|
|
|
u32 lsal;
|
ibm_newemac: Parameterize EMAC Multicast Match Handling
Various instances of the EMAC core have varying: 1) number of address
match slots, 2) width of the registers for handling address match slots,
3) number of registers for handling address match slots and 4) base
offset for those registers.
As the driver stands today, it assumes that all EMACs have 4 IAHT and
GAHT 32-bit registers, starting at offset 0x30 from the register base,
with only 16-bits of each used for a total of 64 match slots.
The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4
core. This core has 8 IAHT and GAHT registers, starting at offset 0x80
from the register base, with ALL 32-bits of each used for a total of
256 match slots.
This adds a new compatible device tree entry "emac4sync" and a new,
related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros
and inlines which supply the appropriate parameterized value based on
the presence or absence of the EMAC4SYNC feature.
The code has further been reworked where appropriate to use those macros
and inlines.
In addition, the register size passed to ioremap is now taken from the
device tree:
c4 for EMAC4SYNC cores
74 for EMAC4 cores
70 for EMAC cores
rather than sizeof (emac_regs).
Finally, the device trees have been updated with the appropriate compatible
entries and resource sizes.
This has been tested on an AMCC Haleakala board such that: 1) inbound
ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11
and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from
'haleakala.local' to those same systems in the '.local' domain via MDNS
now work.
Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-08 06:03:11 +08:00
|
|
|
u32 ipgvr; /* Reset, T */
|
|
|
|
|
u32 stacr; /* Special */
|
|
|
|
|
u32 trtr; /* Special */
|
|
|
|
|
u32 rwmr; /* Reset */
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
u32 octx;
|
|
|
|
|
u32 ocrx;
|
ibm_newemac: Parameterize EMAC Multicast Match Handling
Various instances of the EMAC core have varying: 1) number of address
match slots, 2) width of the registers for handling address match slots,
3) number of registers for handling address match slots and 4) base
offset for those registers.
As the driver stands today, it assumes that all EMACs have 4 IAHT and
GAHT 32-bit registers, starting at offset 0x30 from the register base,
with only 16-bits of each used for a total of 64 match slots.
The 405EX(r) and 460EX now use the EMAC4SYNC core rather than the EMAC4
core. This core has 8 IAHT and GAHT registers, starting at offset 0x80
from the register base, with ALL 32-bits of each used for a total of
256 match slots.
This adds a new compatible device tree entry "emac4sync" and a new,
related feature flag "EMAC_FTR_EMAC4SYNC" along with a series of macros
and inlines which supply the appropriate parameterized value based on
the presence or absence of the EMAC4SYNC feature.
The code has further been reworked where appropriate to use those macros
and inlines.
In addition, the register size passed to ioremap is now taken from the
device tree:
c4 for EMAC4SYNC cores
74 for EMAC4 cores
70 for EMAC cores
rather than sizeof (emac_regs).
Finally, the device trees have been updated with the appropriate compatible
entries and resource sizes.
This has been tested on an AMCC Haleakala board such that: 1) inbound
ICMP requests to 'haleakala.local' via MDNS from both Mac OS X 10.4.11
and Ubuntu 8.04 systems as well as 2) outbound ICMP requests from
'haleakala.local' to those same systems in the '.local' domain via MDNS
now work.
Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-08 06:03:11 +08:00
|
|
|
union {
|
|
|
|
|
/* Registers unique to EMAC4 implementations */
|
|
|
|
|
struct {
|
|
|
|
|
u32 ipcr;
|
|
|
|
|
} emac4;
|
|
|
|
|
/* Registers unique to EMAC4SYNC implementations */
|
|
|
|
|
struct {
|
|
|
|
|
u32 rsvd1;
|
|
|
|
|
u32 revid;
|
|
|
|
|
u32 rsvd2[2];
|
|
|
|
|
u32 iaht1; /* Reset, R */
|
|
|
|
|
u32 iaht2; /* Reset, R */
|
|
|
|
|
u32 iaht3; /* Reset, R */
|
|
|
|
|
u32 iaht4; /* Reset, R */
|
|
|
|
|
u32 iaht5; /* Reset, R */
|
|
|
|
|
u32 iaht6; /* Reset, R */
|
|
|
|
|
u32 iaht7; /* Reset, R */
|
|
|
|
|
u32 iaht8; /* Reset, R */
|
|
|
|
|
u32 gaht1; /* Reset, R */
|
|
|
|
|
u32 gaht2; /* Reset, R */
|
|
|
|
|
u32 gaht3; /* Reset, R */
|
|
|
|
|
u32 gaht4; /* Reset, R */
|
|
|
|
|
u32 gaht5; /* Reset, R */
|
|
|
|
|
u32 gaht6; /* Reset, R */
|
|
|
|
|
u32 gaht7; /* Reset, R */
|
|
|
|
|
u32 gaht8; /* Reset, R */
|
|
|
|
|
u32 tpc; /* Reset, T */
|
|
|
|
|
} emac4sync;
|
|
|
|
|
} u1;
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
|
|
|
|
|
*/
|
|
|
|
|
#define PHY_MODE_NA 0
|
|
|
|
|
#define PHY_MODE_MII 1
|
|
|
|
|
#define PHY_MODE_RMII 2
|
|
|
|
|
#define PHY_MODE_SMII 3
|
|
|
|
|
#define PHY_MODE_RGMII 4
|
|
|
|
|
#define PHY_MODE_TBI 5
|
|
|
|
|
#define PHY_MODE_GMII 6
|
|
|
|
|
#define PHY_MODE_RTBI 7
|
|
|
|
|
#define PHY_MODE_SGMII 8
|
|
|
|
|
|
|
|
|
|
/* EMACx_MR0 */
|
|
|
|
|
#define EMAC_MR0_RXI 0x80000000
|
|
|
|
|
#define EMAC_MR0_TXI 0x40000000
|
|
|
|
|
#define EMAC_MR0_SRST 0x20000000
|
|
|
|
|
#define EMAC_MR0_TXE 0x10000000
|
|
|
|
|
#define EMAC_MR0_RXE 0x08000000
|
|
|
|
|
#define EMAC_MR0_WKE 0x04000000
|
|
|
|
|
|
|
|
|
|
/* EMACx_MR1 */
|
|
|
|
|
#define EMAC_MR1_FDE 0x80000000
|
|
|
|
|
#define EMAC_MR1_ILE 0x40000000
|
|
|
|
|
#define EMAC_MR1_VLE 0x20000000
|
|
|
|
|
#define EMAC_MR1_EIFC 0x10000000
|
|
|
|
|
#define EMAC_MR1_APP 0x08000000
|
|
|
|
|
#define EMAC_MR1_IST 0x01000000
|
|
|
|
|
|
|
|
|
|
#define EMAC_MR1_MF_MASK 0x00c00000
|
|
|
|
|
#define EMAC_MR1_MF_10 0x00000000
|
|
|
|
|
#define EMAC_MR1_MF_100 0x00400000
|
|
|
|
|
#define EMAC_MR1_MF_1000 0x00800000
|
|
|
|
|
#define EMAC_MR1_MF_1000GPCS 0x00c00000
|
|
|
|
|
#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6)
|
|
|
|
|
|
|
|
|
|
#define EMAC_MR1_RFS_4K 0x00300000
|
|
|
|
|
#define EMAC_MR1_RFS_16K 0x00000000
|
|
|
|
|
#define EMAC_MR1_TFS_2K 0x00080000
|
|
|
|
|
#define EMAC_MR1_TR0_MULT 0x00008000
|
|
|
|
|
#define EMAC_MR1_JPSM 0x00000000
|
|
|
|
|
#define EMAC_MR1_MWSW_001 0x00000000
|
|
|
|
|
#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define EMAC4_MR1_RFS_2K 0x00100000
|
|
|
|
|
#define EMAC4_MR1_RFS_4K 0x00180000
|
|
|
|
|
#define EMAC4_MR1_RFS_16K 0x00280000
|
|
|
|
|
#define EMAC4_MR1_TFS_2K 0x00020000
|
|
|
|
|
#define EMAC4_MR1_TFS_4K 0x00030000
|
|
|
|
|
#define EMAC4_MR1_TR 0x00008000
|
|
|
|
|
#define EMAC4_MR1_MWSW_001 0x00001000
|
|
|
|
|
#define EMAC4_MR1_JPSM 0x00000800
|
|
|
|
|
#define EMAC4_MR1_OBCI_MASK 0x00000038
|
|
|
|
|
#define EMAC4_MR1_OBCI_50 0x00000000
|
|
|
|
|
#define EMAC4_MR1_OBCI_66 0x00000008
|
|
|
|
|
#define EMAC4_MR1_OBCI_83 0x00000010
|
|
|
|
|
#define EMAC4_MR1_OBCI_100 0x00000018
|
|
|
|
|
#define EMAC4_MR1_OBCI_100P 0x00000020
|
|
|
|
|
#define EMAC4_MR1_OBCI(freq) ((freq) <= 50 ? EMAC4_MR1_OBCI_50 : \
|
|
|
|
|
(freq) <= 66 ? EMAC4_MR1_OBCI_66 : \
|
|
|
|
|
(freq) <= 83 ? EMAC4_MR1_OBCI_83 : \
|
|
|
|
|
(freq) <= 100 ? EMAC4_MR1_OBCI_100 : \
|
|
|
|
|
EMAC4_MR1_OBCI_100P)
|
|
|
|
|
|
|
|
|
|
/* EMACx_TMR0 */
|
|
|
|
|
#define EMAC_TMR0_GNP 0x80000000
|
|
|
|
|
#define EMAC_TMR0_DEFAULT 0x00000000
|
|
|
|
|
#define EMAC4_TMR0_TFAE_2_32 0x00000001
|
|
|
|
|
#define EMAC4_TMR0_TFAE_4_64 0x00000002
|
|
|
|
|
#define EMAC4_TMR0_TFAE_8_128 0x00000003
|
|
|
|
|
#define EMAC4_TMR0_TFAE_16_256 0x00000004
|
|
|
|
|
#define EMAC4_TMR0_TFAE_32_512 0x00000005
|
|
|
|
|
#define EMAC4_TMR0_TFAE_64_1024 0x00000006
|
|
|
|
|
#define EMAC4_TMR0_TFAE_128_2048 0x00000007
|
|
|
|
|
#define EMAC4_TMR0_DEFAULT EMAC4_TMR0_TFAE_2_32
|
|
|
|
|
#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
|
|
|
|
|
#define EMAC4_TMR0_XMIT (EMAC_TMR0_GNP | EMAC4_TMR0_DEFAULT)
|
|
|
|
|
|
|
|
|
|
/* EMACx_TMR1 */
|
|
|
|
|
|
|
|
|
|
#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16))
|
|
|
|
|
#define EMAC4_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14))
|
|
|
|
|
|
|
|
|
|
/* EMACx_RMR */
|
|
|
|
|
#define EMAC_RMR_SP 0x80000000
|
|
|
|
|
#define EMAC_RMR_SFCS 0x40000000
|
|
|
|
|
#define EMAC_RMR_RRP 0x20000000
|
|
|
|
|
#define EMAC_RMR_RFP 0x10000000
|
|
|
|
|
#define EMAC_RMR_ROP 0x08000000
|
|
|
|
|
#define EMAC_RMR_RPIR 0x04000000
|
|
|
|
|
#define EMAC_RMR_PPP 0x02000000
|
|
|
|
|
#define EMAC_RMR_PME 0x01000000
|
|
|
|
|
#define EMAC_RMR_PMME 0x00800000
|
|
|
|
|
#define EMAC_RMR_IAE 0x00400000
|
|
|
|
|
#define EMAC_RMR_MIAE 0x00200000
|
|
|
|
|
#define EMAC_RMR_BAE 0x00100000
|
|
|
|
|
#define EMAC_RMR_MAE 0x00080000
|
|
|
|
|
#define EMAC_RMR_BASE 0x00000000
|
|
|
|
|
#define EMAC4_RMR_RFAF_2_32 0x00000001
|
|
|
|
|
#define EMAC4_RMR_RFAF_4_64 0x00000002
|
|
|
|
|
#define EMAC4_RMR_RFAF_8_128 0x00000003
|
|
|
|
|
#define EMAC4_RMR_RFAF_16_256 0x00000004
|
|
|
|
|
#define EMAC4_RMR_RFAF_32_512 0x00000005
|
|
|
|
|
#define EMAC4_RMR_RFAF_64_1024 0x00000006
|
|
|
|
|
#define EMAC4_RMR_RFAF_128_2048 0x00000007
|
|
|
|
|
#define EMAC4_RMR_BASE EMAC4_RMR_RFAF_128_2048
|
|
|
|
|
|
|
|
|
|
/* EMACx_ISR & EMACx_ISER */
|
|
|
|
|
#define EMAC4_ISR_TXPE 0x20000000
|
|
|
|
|
#define EMAC4_ISR_RXPE 0x10000000
|
|
|
|
|
#define EMAC4_ISR_TXUE 0x08000000
|
|
|
|
|
#define EMAC4_ISR_RXOE 0x04000000
|
|
|
|
|
#define EMAC_ISR_OVR 0x02000000
|
|
|
|
|
#define EMAC_ISR_PP 0x01000000
|
|
|
|
|
#define EMAC_ISR_BP 0x00800000
|
|
|
|
|
#define EMAC_ISR_RP 0x00400000
|
|
|
|
|
#define EMAC_ISR_SE 0x00200000
|
|
|
|
|
#define EMAC_ISR_ALE 0x00100000
|
|
|
|
|
#define EMAC_ISR_BFCS 0x00080000
|
|
|
|
|
#define EMAC_ISR_PTLE 0x00040000
|
|
|
|
|
#define EMAC_ISR_ORE 0x00020000
|
|
|
|
|
#define EMAC_ISR_IRE 0x00010000
|
|
|
|
|
#define EMAC_ISR_SQE 0x00000080
|
|
|
|
|
#define EMAC_ISR_TE 0x00000040
|
|
|
|
|
#define EMAC_ISR_MOS 0x00000002
|
|
|
|
|
#define EMAC_ISR_MOF 0x00000001
|
|
|
|
|
|
|
|
|
|
/* EMACx_STACR */
|
|
|
|
|
#define EMAC_STACR_PHYD_MASK 0xffff
|
|
|
|
|
#define EMAC_STACR_PHYD_SHIFT 16
|
|
|
|
|
#define EMAC_STACR_OC 0x00008000
|
|
|
|
|
#define EMAC_STACR_PHYE 0x00004000
|
|
|
|
|
#define EMAC_STACR_STAC_MASK 0x00003000
|
|
|
|
|
#define EMAC_STACR_STAC_READ 0x00001000
|
|
|
|
|
#define EMAC_STACR_STAC_WRITE 0x00002000
|
|
|
|
|
#define EMAC_STACR_OPBC_MASK 0x00000C00
|
|
|
|
|
#define EMAC_STACR_OPBC_50 0x00000000
|
|
|
|
|
#define EMAC_STACR_OPBC_66 0x00000400
|
|
|
|
|
#define EMAC_STACR_OPBC_83 0x00000800
|
|
|
|
|
#define EMAC_STACR_OPBC_100 0x00000C00
|
|
|
|
|
#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
|
|
|
|
|
(freq) <= 66 ? EMAC_STACR_OPBC_66 : \
|
|
|
|
|
(freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
|
|
|
|
|
#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb)
|
|
|
|
|
#define EMAC4_STACR_BASE(opb) 0x00000000
|
|
|
|
|
#define EMAC_STACR_PCDA_MASK 0x1f
|
|
|
|
|
#define EMAC_STACR_PCDA_SHIFT 5
|
|
|
|
|
#define EMAC_STACR_PRA_MASK 0x1f
|
|
|
|
|
#define EMACX_STACR_STAC_MASK 0x00003800
|
|
|
|
|
#define EMACX_STACR_STAC_READ 0x00001000
|
|
|
|
|
#define EMACX_STACR_STAC_WRITE 0x00000800
|
|
|
|
|
#define EMACX_STACR_STAC_IND_ADDR 0x00002000
|
|
|
|
|
#define EMACX_STACR_STAC_IND_READ 0x00003800
|
|
|
|
|
#define EMACX_STACR_STAC_IND_READINC 0x00003000
|
|
|
|
|
#define EMACX_STACR_STAC_IND_WRITE 0x00002800
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* EMACx_TRTR */
|
|
|
|
|
#define EMAC_TRTR_SHIFT_EMAC4 27
|
|
|
|
|
#define EMAC_TRTR_SHIFT 24
|
|
|
|
|
|
|
|
|
|
/* EMAC specific TX descriptor control fields (write access) */
|
|
|
|
|
#define EMAC_TX_CTRL_GFCS 0x0200
|
|
|
|
|
#define EMAC_TX_CTRL_GP 0x0100
|
|
|
|
|
#define EMAC_TX_CTRL_ISA 0x0080
|
|
|
|
|
#define EMAC_TX_CTRL_RSA 0x0040
|
|
|
|
|
#define EMAC_TX_CTRL_IVT 0x0020
|
|
|
|
|
#define EMAC_TX_CTRL_RVT 0x0010
|
|
|
|
|
#define EMAC_TX_CTRL_TAH_CSUM 0x000e
|
|
|
|
|
|
|
|
|
|
/* EMAC specific TX descriptor status fields (read access) */
|
|
|
|
|
#define EMAC_TX_ST_BFCS 0x0200
|
|
|
|
|
#define EMAC_TX_ST_LCS 0x0080
|
|
|
|
|
#define EMAC_TX_ST_ED 0x0040
|
|
|
|
|
#define EMAC_TX_ST_EC 0x0020
|
|
|
|
|
#define EMAC_TX_ST_LC 0x0010
|
|
|
|
|
#define EMAC_TX_ST_MC 0x0008
|
|
|
|
|
#define EMAC_TX_ST_SC 0x0004
|
|
|
|
|
#define EMAC_TX_ST_UR 0x0002
|
|
|
|
|
#define EMAC_TX_ST_SQE 0x0001
|
|
|
|
|
#define EMAC_IS_BAD_TX (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
|
|
|
|
|
EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
|
|
|
|
|
EMAC_TX_ST_MC | EMAC_TX_ST_UR)
|
|
|
|
|
#define EMAC_IS_BAD_TX_TAH (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
|
|
|
|
|
EMAC_TX_ST_EC | EMAC_TX_ST_LC)
|
|
|
|
|
|
|
|
|
|
/* EMAC specific RX descriptor status fields (read access) */
|
|
|
|
|
#define EMAC_RX_ST_OE 0x0200
|
|
|
|
|
#define EMAC_RX_ST_PP 0x0100
|
|
|
|
|
#define EMAC_RX_ST_BP 0x0080
|
|
|
|
|
#define EMAC_RX_ST_RP 0x0040
|
|
|
|
|
#define EMAC_RX_ST_SE 0x0020
|
|
|
|
|
#define EMAC_RX_ST_AE 0x0010
|
|
|
|
|
#define EMAC_RX_ST_BFCS 0x0008
|
|
|
|
|
#define EMAC_RX_ST_PTL 0x0004
|
|
|
|
|
#define EMAC_RX_ST_ORE 0x0002
|
|
|
|
|
#define EMAC_RX_ST_IRE 0x0001
|
|
|
|
|
#define EMAC_RX_TAH_BAD_CSUM 0x0003
|
|
|
|
|
#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
|
|
|
|
|
EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
|
|
|
|
|
EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
|
|
|
|
|
EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
|
|
|
|
|
EMAC_RX_ST_IRE )
|
|
|
|
|
#endif /* __IBM_NEWEMAC_H */
|
