korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-15 15:04:27 +08:00
Code Issues Packages Projects Releases Wiki Activity
d21d1f33b1
linux/drivers/net/ipa/ipa_qmi_msg.c

724 lines
18 KiB
C
Raw Normal View History

soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2018-2020 Linaro Ltd.
*/
#include <linux/stddef.h>
#include <linux/soc/qcom/qmi.h>
#include "ipa_qmi_msg.h"
/* QMI message structure definition for struct ipa_indication_register_req */
struct qmi_elem_info ipa_indication_register_req_ei[] = {
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
master_driver_init_complete_valid),
.tlv_type = 0x10,
.offset = offsetof(struct ipa_indication_register_req,
master_driver_init_complete_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
master_driver_init_complete),
.tlv_type = 0x10,
.offset = offsetof(struct ipa_indication_register_req,
master_driver_init_complete),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
data_usage_quota_reached_valid),
.tlv_type = 0x11,
.offset = offsetof(struct ipa_indication_register_req,
data_usage_quota_reached_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
data_usage_quota_reached),
.tlv_type = 0x11,
.offset = offsetof(struct ipa_indication_register_req,
data_usage_quota_reached),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
ipa_mhi_ready_ind_valid),
net: ipa: fix a duplicated tlv_type value In the ipa_indication_register_req_ei[] encoding array, the tlv_type associated with the ipa_mhi_ready_ind field is wrong. It duplicates the value used for the data_usage_quota_reached field (0x11) and should use value 0x12 instead. Fix this bug. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:10 +08:00
.tlv_type = 0x12,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.offset = offsetof(struct ipa_indication_register_req,
ipa_mhi_ready_ind_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
ipa_mhi_ready_ind),
net: ipa: fix a duplicated tlv_type value In the ipa_indication_register_req_ei[] encoding array, the tlv_type associated with the ipa_mhi_ready_ind field is wrong. It duplicates the value used for the data_usage_quota_reached field (0x11) and should use value 0x12 instead. Fix this bug. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:10 +08:00
.tlv_type = 0x12,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.offset = offsetof(struct ipa_indication_register_req,
ipa_mhi_ready_ind),
},
net: ipa: extend the INDICATION_REGISTER request The specified format of the INDICATION_REGISTER QMI request message has been extended to support two more optional fields: endpoint_desc_ind: sender wishes to receive endpoint descriptor information via an IPA ENDP_DESC indication QMI message bw_change_ind: sender wishes to receive bandwidth change information via an IPA BW_CHANGE indication QMI message Add definitions that permit these fields to be formatted and parsed by the QMI library code. Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:12 +08:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
endpoint_desc_ind_valid),
.tlv_type = 0x13,
.offset = offsetof(struct ipa_indication_register_req,
endpoint_desc_ind_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
endpoint_desc_ind),
.tlv_type = 0x13,
.offset = offsetof(struct ipa_indication_register_req,
endpoint_desc_ind),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
bw_change_ind_valid),
.tlv_type = 0x14,
.offset = offsetof(struct ipa_indication_register_req,
bw_change_ind_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_req,
bw_change_ind),
.tlv_type = 0x14,
.offset = offsetof(struct ipa_indication_register_req,
bw_change_ind),
},
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_indication_register_rsp */
struct qmi_elem_info ipa_indication_register_rsp_ei[] = {
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_indication_register_rsp,
rsp),
.tlv_type = 0x02,
.offset = offsetof(struct ipa_indication_register_rsp,
rsp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_driver_init_complete_req */
struct qmi_elem_info ipa_driver_init_complete_req_ei[] = {
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_driver_init_complete_req,
status),
.tlv_type = 0x01,
.offset = offsetof(struct ipa_driver_init_complete_req,
status),
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_driver_init_complete_rsp */
struct qmi_elem_info ipa_driver_init_complete_rsp_ei[] = {
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_driver_init_complete_rsp,
rsp),
.tlv_type = 0x02,
net: ipa: fix QMI structure definition bugs Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07 07:10:08 +08:00
.offset = offsetof(struct ipa_driver_init_complete_rsp,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
rsp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_init_complete_ind */
struct qmi_elem_info ipa_init_complete_ind_ei[] = {
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_complete_ind,
status),
.tlv_type = 0x02,
net: ipa: fix QMI structure definition bugs Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07 07:10:08 +08:00
.offset = offsetof(struct ipa_init_complete_ind,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
status),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_mem_bounds */
struct qmi_elem_info ipa_mem_bounds_ei[] = {
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_mem_bounds, start),
.offset = offsetof(struct ipa_mem_bounds, start),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_mem_bounds, end),
.offset = offsetof(struct ipa_mem_bounds, end),
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_mem_array */
struct qmi_elem_info ipa_mem_array_ei[] = {
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_mem_array, start),
.offset = offsetof(struct ipa_mem_array, start),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_mem_array, count),
.offset = offsetof(struct ipa_mem_array, count),
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_mem_range */
struct qmi_elem_info ipa_mem_range_ei[] = {
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_mem_range, start),
.offset = offsetof(struct ipa_mem_range, start),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_mem_range, size),
.offset = offsetof(struct ipa_mem_range, size),
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_init_modem_driver_req */
struct qmi_elem_info ipa_init_modem_driver_req_ei[] = {
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
platform_type_valid),
.tlv_type = 0x10,
net: ipa: fix QMI structure definition bugs Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07 07:10:08 +08:00
.offset = offsetof(struct ipa_init_modem_driver_req,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
platform_type_valid),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
platform_type),
.tlv_type = 0x10,
.offset = offsetof(struct ipa_init_modem_driver_req,
platform_type),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hdr_tbl_info_valid),
.tlv_type = 0x11,
.offset = offsetof(struct ipa_init_modem_driver_req,
hdr_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hdr_tbl_info),
.tlv_type = 0x11,
.offset = offsetof(struct ipa_init_modem_driver_req,
hdr_tbl_info),
.ei_array = ipa_mem_bounds_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_route_tbl_info_valid),
.tlv_type = 0x12,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_route_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_route_tbl_info),
.tlv_type = 0x12,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_route_tbl_info),
.ei_array = ipa_mem_array_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_route_tbl_info_valid),
.tlv_type = 0x13,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_route_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_route_tbl_info),
.tlv_type = 0x13,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_route_tbl_info),
.ei_array = ipa_mem_array_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_filter_tbl_start_valid),
.tlv_type = 0x14,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_filter_tbl_start_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_filter_tbl_start),
.tlv_type = 0x14,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_filter_tbl_start),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_filter_tbl_start_valid),
.tlv_type = 0x15,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_filter_tbl_start_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_filter_tbl_start),
.tlv_type = 0x15,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_filter_tbl_start),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
modem_mem_info_valid),
.tlv_type = 0x16,
.offset = offsetof(struct ipa_init_modem_driver_req,
modem_mem_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
modem_mem_info),
.tlv_type = 0x16,
.offset = offsetof(struct ipa_init_modem_driver_req,
modem_mem_info),
.ei_array = ipa_mem_range_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
ctrl_comm_dest_end_pt_valid),
.tlv_type = 0x17,
.offset = offsetof(struct ipa_init_modem_driver_req,
ctrl_comm_dest_end_pt_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
ctrl_comm_dest_end_pt),
.tlv_type = 0x17,
.offset = offsetof(struct ipa_init_modem_driver_req,
ctrl_comm_dest_end_pt),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
skip_uc_load_valid),
.tlv_type = 0x18,
.offset = offsetof(struct ipa_init_modem_driver_req,
skip_uc_load_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
skip_uc_load),
.tlv_type = 0x18,
.offset = offsetof(struct ipa_init_modem_driver_req,
skip_uc_load),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hdr_proc_ctx_tbl_info_valid),
.tlv_type = 0x19,
.offset = offsetof(struct ipa_init_modem_driver_req,
hdr_proc_ctx_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hdr_proc_ctx_tbl_info),
.tlv_type = 0x19,
.offset = offsetof(struct ipa_init_modem_driver_req,
hdr_proc_ctx_tbl_info),
.ei_array = ipa_mem_bounds_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
zip_tbl_info_valid),
.tlv_type = 0x1a,
.offset = offsetof(struct ipa_init_modem_driver_req,
zip_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
zip_tbl_info),
.tlv_type = 0x1a,
.offset = offsetof(struct ipa_init_modem_driver_req,
zip_tbl_info),
.ei_array = ipa_mem_bounds_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_hash_route_tbl_info_valid),
.tlv_type = 0x1b,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_hash_route_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_hash_route_tbl_info),
.tlv_type = 0x1b,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_hash_route_tbl_info),
.ei_array = ipa_mem_array_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_hash_route_tbl_info_valid),
.tlv_type = 0x1c,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_hash_route_tbl_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_hash_route_tbl_info),
.tlv_type = 0x1c,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_hash_route_tbl_info),
.ei_array = ipa_mem_array_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_hash_filter_tbl_start_valid),
.tlv_type = 0x1d,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_hash_filter_tbl_start_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v4_hash_filter_tbl_start),
.tlv_type = 0x1d,
.offset = offsetof(struct ipa_init_modem_driver_req,
v4_hash_filter_tbl_start),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_hash_filter_tbl_start_valid),
.tlv_type = 0x1e,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_hash_filter_tbl_start_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
v6_hash_filter_tbl_start),
.tlv_type = 0x1e,
.offset = offsetof(struct ipa_init_modem_driver_req,
v6_hash_filter_tbl_start),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_quota_base_addr_valid),
.tlv_type = 0x1f,
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_quota_base_addr_valid),
},
{
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.data_type = QMI_UNSIGNED_4_BYTE,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_quota_base_addr),
.tlv_type = 0x1f,
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_quota_base_addr),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_quota_size_valid),
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.tlv_type = 0x20,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_quota_size_valid),
},
{
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.data_type = QMI_UNSIGNED_4_BYTE,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_quota_size),
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.tlv_type = 0x20,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_quota_size),
},
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_drop_base_addr_valid),
.tlv_type = 0x21,
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_drop_base_addr_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_drop_base_addr),
.tlv_type = 0x21,
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_drop_base_addr),
},
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_drop_size_valid),
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.tlv_type = 0x22,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_drop_size_valid),
},
{
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.data_type = QMI_UNSIGNED_4_BYTE,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_req,
hw_stats_drop_size),
net: ipa: fix another QMI message definition The ipa_init_modem_driver_req_ei[] encoding array for the INIT_MODEM_DRIVER request message has some errors in it. First, the tlv_type associated with the hw_stats_quota_size field is wrong; it duplicates the valiue used for the hw_stats_quota_base_addr field (0x1f) and should use 0x20 instead. The tlv_type value for the hw_stats_drop_size field also uses the same duplicate value; it should use 0x22 instead. Second, there is no definition for the hw_stats_drop_base_addr field. It is an optional 32-bit enumerated type value. Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and hw_stats_drop_size fields are defined as enumerated types; they should be unsigned 4-byte values. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15 23:21:11 +08:00
.tlv_type = 0x22,
soc: qcom: ipa: AP/modem communications This patch implements two forms of out-of-band communication between the AP and modem. - QMI is a mechanism that allows clients running on the AP interact with services running on the modem (and vice-versa). The AP IPA driver uses QMI to communicate with the corresponding IPA driver resident on the modem, to agree on parameters used with the IPA hardware and to ensure both sides are ready before entering operational mode. - SMP2P is a more primitive mechanism available for the modem and AP to communicate with each other. It provides a means for either the AP or modem to interrupt the other, and furthermore, to provide 32 bits worth of information. The IPA driver uses SMP2P to tell the modem what the state of the IPA clock was in the event of a crash. This allows the modem to safely access the IPA hardware (or avoid doing so) when a crash occurs, for example, to access information within the IPA hardware. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06 12:28:28 +08:00
.offset = offsetof(struct ipa_init_modem_driver_req,
hw_stats_drop_size),
},
{
.data_type = QMI_EOTI,
},
};
/* QMI message structure definition for struct ipa_init_modem_driver_rsp */
struct qmi_elem_info ipa_init_modem_driver_rsp_ei[] = {
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
rsp),
.tlv_type = 0x02,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
rsp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
ctrl_comm_dest_end_pt_valid),
.tlv_type = 0x10,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
ctrl_comm_dest_end_pt_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
ctrl_comm_dest_end_pt),
.tlv_type = 0x10,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
ctrl_comm_dest_end_pt),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
default_end_pt_valid),
.tlv_type = 0x11,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
default_end_pt_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
default_end_pt),
.tlv_type = 0x11,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
default_end_pt),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
modem_driver_init_pending_valid),
.tlv_type = 0x12,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
modem_driver_init_pending_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size =
sizeof_field(struct ipa_init_modem_driver_rsp,
modem_driver_init_pending),
.tlv_type = 0x12,
.offset = offsetof(struct ipa_init_modem_driver_rsp,
modem_driver_init_pending),
},
{
.data_type = QMI_EOTI,
},
};
Reference in New Issue Copy Permalink