korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-29 22:14:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
d1c912c100
linux/arch/arm/configs/imx_v4_v5_defconfig

198 lines
4.4 KiB
Plaintext
Raw Normal View History

i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_LOG_BUF_SHIFT=14
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_CGROUPS=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 06:44:16 +08:00
CONFIG_EXPERT=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
# CONFIG_COMPAT_BRK is not set
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
ARM: imx: enable multi-platform build It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-17 09:38:39 +08:00
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 20:15:55 +08:00
CONFIG_ARCH_MXC=y
CONFIG_MXC_IRQ_PRIOR=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_MACH_APF9328=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_MACH_EUKREA_CPUIMX25SD=y
ARM: imx_v4_v5_defconfig: Select CONFIG_MACH_IMX25_DT Allow booting a mx25 dt kernel by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-03 20:42:57 +08:00
CONFIG_MACH_IMX25_DT=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_MACH_MX27ADS=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_MACH_PCM038=y
ARM: mx27_defconfig: enable switches used in mx27 code - enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10, MACH_PCA100, MACH_MXT_TD60) including optional features for CPUIMX27 - eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846 - mach-cpuimx27.c uses SERIAL_8250 - several machines make use of SPI_IMX (selects SPI_BITBANG) - drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb11e - several machines make use of USB_ULPI (depends on USB, but don't enable USB_DEVICE_CLASS as it's deprecated) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 18:35:41 +08:00
CONFIG_MACH_CPUIMX27=y
CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
mx27 defconfig update - enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-24 23:30:50 +08:00
CONFIG_MACH_MX27_3DS=y
ARM: mx27_defconfig: enable switches used in mx27 code - enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10, MACH_PCA100, MACH_MXT_TD60) including optional features for CPUIMX27 - eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846 - mach-cpuimx27.c uses SERIAL_8250 - several machines make use of SPI_IMX (selects SPI_BITBANG) - drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb11e - several machines make use of USB_ULPI (depends on USB, but don't enable USB_DEVICE_CLASS as it's deprecated) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 18:35:41 +08:00
CONFIG_MACH_IMX27_VISSTRIM_M10=y
imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform" Not using MACH_IMX27LITE makes machine_is_imx27lite always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
2009-12-10 17:25:07 +08:00
CONFIG_MACH_IMX27LITE=y
ARM: mx27_defconfig: enable switches used in mx27 code - enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10, MACH_PCA100, MACH_MXT_TD60) including optional features for CPUIMX27 - eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846 - mach-cpuimx27.c uses SERIAL_8250 - several machines make use of SPI_IMX (selects SPI_BITBANG) - drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb11e - several machines make use of USB_ULPI (depends on USB, but don't enable USB_DEVICE_CLASS as it's deprecated) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 18:35:41 +08:00
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_MACH_IMX27IPCAM=y
ARM: imx_v4_v5_defconfig: Let CONFIG_MACH_IMX27_DT be built by default Let CONFIG_MACH_IMX27_DT be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-12 09:12:12 +08:00
CONFIG_MACH_IMX27_DT=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_PM_DEBUG=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_IP_PNP_DHCP=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
ARM: imx: configs: enable netfilter support The Netfilter packet filtering framework is useful for so many use cases that most people will build kernels with it enabled. So, it would probably make sense to have it enabled by default. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-05 16:33:19 +08:00
CONFIG_NETFILTER=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
mx27 defconfig update - enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-24 23:30:50 +08:00
CONFIG_MTD_NAND=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_MTD_NAND_MXC=y
mx27 defconfig update - enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-24 23:30:50 +08:00
CONFIG_MTD_UBI=y
CONFIG_EEPROM_AT24=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_EEPROM_AT25=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_ATA=y
CONFIG_PATA_IMX=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_NETDEVICES=y
CS89x0 : add CS89x0 platform device to the iMX21ADS board Add CS89x0 networking support to the iMX21ADS board by using the platform driver support in the CS89x0 driver. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-27 04:46:57 +08:00
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_DM9000=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_SMC91X=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_SMC911X=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_SMSC911X=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_SMSC_PHY=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
ARM: imx_v4_v5_defconfig: Enable gpio regulator and gpio button/keyboard. The eukrea mbimxsd25 has a gpio regulator for enabling its LCD display, it also has a gpio button. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 16:40:17 +08:00
CONFIG_KEYBOARD_GPIO=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_KEYBOARD_IMX=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
ARM: mx27_defconfig: enable switches used in mx27 code - enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10, MACH_PCA100, MACH_MXT_TD60) including optional features for CPUIMX27 - eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846 - mach-cpuimx27.c uses SERIAL_8250 - several machines make use of SPI_IMX (selects SPI_BITBANG) - drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb11e - several machines make use of USB_ULPI (depends on USB, but don't enable USB_DEVICE_CLASS as it's deprecated) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 18:35:41 +08:00
CONFIG_TOUCHSCREEN_ADS7846=m
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_TOUCHSCREEN_MC13783=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
# CONFIG_LEGACY_PTYS is not set
ARM: mx27_defconfig: enable switches used in mx27 code - enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10, MACH_PCA100, MACH_MXT_TD60) including optional features for CPUIMX27 - eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846 - mach-cpuimx27.c uses SERIAL_8250 - several machines make use of SPI_IMX (selects SPI_BITBANG) - drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb11e - several machines make use of USB_ULPI (depends on USB, but don't enable USB_DEVICE_CLASS as it's deprecated) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 18:35:41 +08:00
CONFIG_SERIAL_8250=m
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_SPI=y
ARM: mx27_defconfig: enable switches used in mx27 code - enable all mx27 machines (MACH_CPUIMX27, MACH_IMX27_VISSTRIM_M10, MACH_PCA100, MACH_MXT_TD60) including optional features for CPUIMX27 - eukrea_mbimx27-baseboard.c uses TOUCHSCREEN_ADS7846 - mach-cpuimx27.c uses SERIAL_8250 - several machines make use of SPI_IMX (selects SPI_BITBANG) - drop VGA_CONSOLE as this isn't selectable anymore since fb78b51cb11e - several machines make use of USB_ULPI (depends on USB, but don't enable USB_DEVICE_CLASS as it's deprecated) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-09-21 18:35:41 +08:00
CONFIG_SPI_IMX=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_SPI_SPIDEV=y
ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS Add CONFIG_GPIO_SYSFS as it is helpful for accessing GPIO from userspace. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-18 23:45:20 +08:00
CONFIG_GPIO_SYSFS=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
ARM: imx_v4_v5_defconfig: enable adc and touch driver of mc13783 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-29 05:05:05 +08:00
CONFIG_HWMON=m
CONFIG_SENSORS_MC13783_ADC=m
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_MFD_MC13XXX_SPI=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_REGULATOR=y
ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE Add support for CONFIG_REGULATOR_FIXED_VOLTAGE. Without this option the mx27_3ds cannot have the external Ethernet functional due to the need of smsc regulators. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-12 07:24:39 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: imx_v4_v5_defconfig: Enable gpio regulator and gpio button/keyboard. The eukrea mbimxsd25 has a gpio regulator for enabling its LCD display, it also has a gpio button. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-23 16:40:17 +08:00
CONFIG_REGULATOR_GPIO=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
ARM: imx_v4_v5_defconfig: Update defconfig Select the following drivers to be built by default: - SMSC911x - LCD_L4F00242T0 (LCD present on mx27pdk) - CONFIG_VIDEO_MX2 - OV2640 (Camera present on mx27pdk) - CONFIG_VIDEO_MX2 (Allow mx2 video capture) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-16 05:36:11 +08:00
CONFIG_MEDIA_SUPPORT=y
ARM: imx: configs: Enable CONFIG_MEDIA_CAMERA_SUPPORT Since commit b4c184e5 (edia] media: reorganize the main Kconfig items), it is necessary to select CONFIG_MEDIA_CAMERA_SUPPORT in order to be able to use the SoC camera drivers. Select CONFIG_MEDIA_CAMERA_SUPPORT so that we can use mx2-camera/mx3-camera by default as previously. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-10-08 01:44:17 +08:00
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 20:15:55 +08:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: imx_v4_v5_defconfig: Update defconfig Select the following drivers to be built by default: - SMSC911x - LCD_L4F00242T0 (LCD present on mx27pdk) - CONFIG_VIDEO_MX2 - OV2640 (Camera present on mx27pdk) - CONFIG_VIDEO_MX2 (Allow mx2 video capture) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-16 05:36:11 +08:00
CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_MX2=y
ARM: imx_v4_v5_defconfig: Add VPU support Let the VPU driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 23:49:12 +08:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 20:15:55 +08:00
CONFIG_SOC_CAMERA_OV2640=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_SOC=y
CONFIG_SND_IMX_SOC=y
CONFIG_SND_SOC_MX27VIS_AIC32X4=y
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_SND_SOC_IMX_SGTL5000=y
ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-12 19:55:53 +08:00
CONFIG_SND_SOC_IMX_MC13783=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_MMC=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
CONFIG_MMC_MXC=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
imx_v4_v5_defconfig: update default configuration - add new machine APF9328 - update CPUIMX25 -> CPUIMX25SD - add drivers : - MXC nand driver - DM9000 - SMSC Phy - SPIdev - Led GPIO Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13 14:31:39 +08:00
CONFIG_LEDS_GPIO=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_RTC_DRV_IMXDI=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_RTC_DRV_MC13XXX=y
rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 06:07:37 +08:00
CONFIG_RTC_DRV_MXC=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_COMMON_CLK_DEBUG=y
ARM i.MX defconfigs: use one defconfig for all ARMv4/v5 SoCs Now that we can compile all ARMv4/v5 based i.MX SoCs into a single kernel, update the defconfigs accordingly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-23 23:21:52 +08:00
# CONFIG_IOMMU_SUPPORT is not set
ARM: imx_v4_v5_defconfig: update features - reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-27 03:26:17 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
# CONFIG_DNOTIFY is not set
mxc defconfig updates This patch removes several i.MX board specific defconfig files in favour for a mx1_defconfig, mx27_defconfig and mx3_defconfig. All config files have all currently available boards, i.MX specific drivers and the network device drivers for the boards enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-08 17:39:34 +08:00
# CONFIG_PROC_PAGE_MONITOR is not set
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
mx27 defconfig update - enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-24 23:30:50 +08:00
CONFIG_UBIFS_FS=y
i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05 16:03:00 +08:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
mx27 defconfig update - enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-24 23:30:50 +08:00
# CONFIG_CRYPTO_ANSI_CPRNG is not set
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 20:15:55 +08:00
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
Reference in New Issue Copy Permalink