linux/drivers/mtd/nand/ecc-mtk.c

622 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* MTK ECC controller driver.
* Copyright (C) 2016 MediaTek Inc.
* Authors: Xiaolei Li <xiaolei.li@mediatek.com>
* Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/iopoll.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/mutex.h>
#include <linux/mtd/nand-ecc-mtk.h>
#define ECC_IDLE_MASK BIT(0)
#define ECC_IRQ_EN BIT(0)
#define ECC_PG_IRQ_SEL BIT(1)
#define ECC_OP_ENABLE (1)
#define ECC_OP_DISABLE (0)
#define ECC_ENCCON (0x00)
#define ECC_ENCCNFG (0x04)
#define ECC_MS_SHIFT (16)
#define ECC_ENCDIADDR (0x08)
#define ECC_ENCIDLE (0x0C)
#define ECC_DECCON (0x100)
#define ECC_DECCNFG (0x104)
#define DEC_EMPTY_EN BIT(31)
#define DEC_CNFG_CORRECT (0x3 << 12)
#define ECC_DECIDLE (0x10C)
#define ECC_DECENUM0 (0x114)
#define ECC_TIMEOUT (500000)
#define ECC_IDLE_REG(op) ((op) == ECC_ENCODE ? ECC_ENCIDLE : ECC_DECIDLE)
#define ECC_CTL_REG(op) ((op) == ECC_ENCODE ? ECC_ENCCON : ECC_DECCON)
#define ECC_ERRMASK_MT7622 GENMASK(4, 0)
#define ECC_ERRMASK_MT2701 GENMASK(5, 0)
#define ECC_ERRMASK_MT2712 GENMASK(6, 0)
struct mtk_ecc_caps {
u32 err_mask;
u32 err_shift;
const u8 *ecc_strength;
const u32 *ecc_regs;
u8 num_ecc_strength;
u8 ecc_mode_shift;
u32 parity_bits;
int pg_irq_sel;
};
struct mtk_ecc {
struct device *dev;
const struct mtk_ecc_caps *caps;
void __iomem *regs;
struct clk *clk;
struct completion done;
struct mutex lock;
u32 sectors;
u8 *eccdata;
};
/* ecc strength that each IP supports */
static const u8 ecc_strength_mt2701[] = {
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
40, 44, 48, 52, 56, 60
};
static const u8 ecc_strength_mt2712[] = {
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
40, 44, 48, 52, 56, 60, 68, 72, 80
};
static const u8 ecc_strength_mt7622[] = {
4, 6, 8, 10, 12
};
static const u8 ecc_strength_mt7986[] = {
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
};
enum mtk_ecc_regs {
ECC_ENCPAR00,
ECC_ENCIRQ_EN,
ECC_ENCIRQ_STA,
ECC_DECDONE,
ECC_DECIRQ_EN,
ECC_DECIRQ_STA,
};
static int mt2701_ecc_regs[] = {
[ECC_ENCPAR00] = 0x10,
[ECC_ENCIRQ_EN] = 0x80,
[ECC_ENCIRQ_STA] = 0x84,
[ECC_DECDONE] = 0x124,
[ECC_DECIRQ_EN] = 0x200,
[ECC_DECIRQ_STA] = 0x204,
};
static int mt2712_ecc_regs[] = {
[ECC_ENCPAR00] = 0x300,
[ECC_ENCIRQ_EN] = 0x80,
[ECC_ENCIRQ_STA] = 0x84,
[ECC_DECDONE] = 0x124,
[ECC_DECIRQ_EN] = 0x200,
[ECC_DECIRQ_STA] = 0x204,
};
static int mt7622_ecc_regs[] = {
[ECC_ENCPAR00] = 0x10,
[ECC_ENCIRQ_EN] = 0x30,
[ECC_ENCIRQ_STA] = 0x34,
[ECC_DECDONE] = 0x11c,
[ECC_DECIRQ_EN] = 0x140,
[ECC_DECIRQ_STA] = 0x144,
};
static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
enum mtk_ecc_operation op)
{
struct device *dev = ecc->dev;
u32 val;
int ret;
ret = readl_poll_timeout_atomic(ecc->regs + ECC_IDLE_REG(op), val,
val & ECC_IDLE_MASK,
10, ECC_TIMEOUT);
if (ret)
dev_warn(dev, "%s NOT idle\n",
op == ECC_ENCODE ? "encoder" : "decoder");
}
static irqreturn_t mtk_ecc_irq(int irq, void *id)
{
struct mtk_ecc *ecc = id;
u32 dec, enc;
dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA])
& ECC_IRQ_EN;
if (dec) {
dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
if (dec & ecc->sectors) {
mtd: nand: mtk: fix infinite ECC decode IRQ issue For MT2701 NAND Controller, there may generate infinite ECC decode IRQ during long time burn test on some platforms. Once this issue occurred, the ECC decode IRQ status cannot be cleared in the IRQ handler function, and threads cannot be scheduled. ECC HW generates decode IRQ each sector, so there will have more than one decode IRQ if read one page of large page NAND. Currently, ECC IRQ handle flow is that we will check whether it is decode IRQ at first by reading the register ECC_DECIRQ_STA. This is a read-clear type register. If this IRQ is decode IRQ, then the ECC IRQ signal will be cleared at the same time. Secondly, we will check whether all sectors are decoded by reading the register ECC_DECDONE. This is because the current IRQ may be not dealed in time, and the next sectors have been decoded before reading the register ECC_DECIRQ_STA. Then, the next sectors's decode IRQs will not be generated. Thirdly, if all sectors are decoded by comparing with ecc->sectors, then we will complete ecc->done, set ecc->sectors as 0, and disable ECC IRQ by programming the register ECC_IRQ_REG(op) as 0. Otherwise, wait for the next ECC IRQ. But, there is a timing issue between step one and two. When we read the reigster ECC_DECIRQ_STA, all sectors are decoded except the last sector, and the ECC IRQ signal is cleared. But the last sector is decoded before reading ECC_DECDONE, so the ECC IRQ signal is enabled again by ECC HW, and it means we will receive one extra ECC IRQ later. In step three, we will find that all sectors were decoded, then disable ECC IRQ and return. When deal with the extra ECC IRQ, the ECC IRQ status cannot be cleared anymore. That is because the register ECC_DECIRQ_STA can only be cleared when the register ECC_IRQ_REG(op) is enabled. But actually we have disabled ECC IRQ in the previous ECC IRQ handle. So, there will keep receiving ECC decode IRQ. Now, we read the register ECC_DECIRQ_STA once again before completing the ecc done event. This ensures that there will be no extra ECC decode IRQ. Also, remove writel(0, ecc->regs + ECC_IRQ_REG(op)) from irq handler, because ECC IRQ is disabled in mtk_ecc_disable(). And clear ECC_DECIRQ_STA in mtk_ecc_disable() in case there is a timeout to wait decode IRQ. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Cc: <stable@vger.kernel.org> Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-30 10:39:56 +08:00
/*
* Clear decode IRQ status once again to ensure that
* there will be no extra IRQ.
*/
readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA]);
ecc->sectors = 0;
complete(&ecc->done);
} else {
return IRQ_HANDLED;
}
} else {
enc = readl(ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_STA])
& ECC_IRQ_EN;
if (enc)
complete(&ecc->done);
else
return IRQ_NONE;
}
return IRQ_HANDLED;
}
static int mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
{
u32 ecc_bit, dec_sz, enc_sz;
u32 reg, i;
for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
if (ecc->caps->ecc_strength[i] == config->strength)
break;
}
if (i == ecc->caps->num_ecc_strength) {
dev_err(ecc->dev, "invalid ecc strength %d\n",
config->strength);
return -EINVAL;
}
ecc_bit = i;
if (config->op == ECC_ENCODE) {
/* configure ECC encoder (in bits) */
enc_sz = config->len << 3;
reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
reg |= (enc_sz << ECC_MS_SHIFT);
writel(reg, ecc->regs + ECC_ENCCNFG);
if (config->mode != ECC_NFI_MODE)
writel(lower_32_bits(config->addr),
ecc->regs + ECC_ENCDIADDR);
} else {
/* configure ECC decoder (in bits) */
dec_sz = (config->len << 3) +
config->strength * ecc->caps->parity_bits;
reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
reg |= (dec_sz << ECC_MS_SHIFT) | DEC_CNFG_CORRECT;
reg |= DEC_EMPTY_EN;
writel(reg, ecc->regs + ECC_DECCNFG);
if (config->sectors)
ecc->sectors = 1 << (config->sectors - 1);
}
return 0;
}
void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
int sectors)
{
u32 offset, i, err;
u32 bitflips = 0;
stats->corrected = 0;
stats->failed = 0;
for (i = 0; i < sectors; i++) {
offset = (i >> 2) << 2;
err = readl(ecc->regs + ECC_DECENUM0 + offset);
err = err >> ((i % 4) * ecc->caps->err_shift);
err &= ecc->caps->err_mask;
if (err == ecc->caps->err_mask) {
/* uncorrectable errors */
stats->failed++;
continue;
}
stats->corrected += err;
bitflips = max_t(u32, bitflips, err);
}
stats->bitflips = bitflips;
}
EXPORT_SYMBOL(mtk_ecc_get_stats);
void mtk_ecc_release(struct mtk_ecc *ecc)
{
clk_disable_unprepare(ecc->clk);
put_device(ecc->dev);
}
EXPORT_SYMBOL(mtk_ecc_release);
static void mtk_ecc_hw_init(struct mtk_ecc *ecc)
{
mtk_ecc_wait_idle(ecc, ECC_ENCODE);
writew(ECC_OP_DISABLE, ecc->regs + ECC_ENCCON);
mtk_ecc_wait_idle(ecc, ECC_DECODE);
writel(ECC_OP_DISABLE, ecc->regs + ECC_DECCON);
}
static struct mtk_ecc *mtk_ecc_get(struct device_node *np)
{
struct platform_device *pdev;
struct mtk_ecc *ecc;
pdev = of_find_device_by_node(np);
if (!pdev)
return ERR_PTR(-EPROBE_DEFER);
ecc = platform_get_drvdata(pdev);
if (!ecc) {
put_device(&pdev->dev);
return ERR_PTR(-EPROBE_DEFER);
}
clk_prepare_enable(ecc->clk);
mtk_ecc_hw_init(ecc);
return ecc;
}
struct mtk_ecc *of_mtk_ecc_get(struct device_node *of_node)
{
struct mtk_ecc *ecc = NULL;
struct device_node *np;
np = of_parse_phandle(of_node, "nand-ecc-engine", 0);
/* for backward compatibility */
if (!np)
np = of_parse_phandle(of_node, "ecc-engine", 0);
if (np) {
ecc = mtk_ecc_get(np);
of_node_put(np);
}
return ecc;
}
EXPORT_SYMBOL(of_mtk_ecc_get);
int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
{
enum mtk_ecc_operation op = config->op;
u16 reg_val;
int ret;
ret = mutex_lock_interruptible(&ecc->lock);
if (ret) {
dev_err(ecc->dev, "interrupted when attempting to lock\n");
return ret;
}
mtk_ecc_wait_idle(ecc, op);
ret = mtk_ecc_config(ecc, config);
if (ret) {
mutex_unlock(&ecc->lock);
return ret;
}
if (config->mode != ECC_NFI_MODE || op != ECC_ENCODE) {
init_completion(&ecc->done);
reg_val = ECC_IRQ_EN;
/*
* For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it
* means this chip can only generate one ecc irq during page
* read / write. If is 0, generate one ecc irq each ecc step.
*/
if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE)
reg_val |= ECC_PG_IRQ_SEL;
if (op == ECC_ENCODE)
writew(reg_val, ecc->regs +
ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
else
writew(reg_val, ecc->regs +
ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
}
writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
return 0;
}
EXPORT_SYMBOL(mtk_ecc_enable);
void mtk_ecc_disable(struct mtk_ecc *ecc)
{
enum mtk_ecc_operation op = ECC_ENCODE;
/* find out the running operation */
if (readw(ecc->regs + ECC_CTL_REG(op)) != ECC_OP_ENABLE)
op = ECC_DECODE;
/* disable it */
mtk_ecc_wait_idle(ecc, op);
if (op == ECC_DECODE) {
mtd: nand: mtk: fix infinite ECC decode IRQ issue For MT2701 NAND Controller, there may generate infinite ECC decode IRQ during long time burn test on some platforms. Once this issue occurred, the ECC decode IRQ status cannot be cleared in the IRQ handler function, and threads cannot be scheduled. ECC HW generates decode IRQ each sector, so there will have more than one decode IRQ if read one page of large page NAND. Currently, ECC IRQ handle flow is that we will check whether it is decode IRQ at first by reading the register ECC_DECIRQ_STA. This is a read-clear type register. If this IRQ is decode IRQ, then the ECC IRQ signal will be cleared at the same time. Secondly, we will check whether all sectors are decoded by reading the register ECC_DECDONE. This is because the current IRQ may be not dealed in time, and the next sectors have been decoded before reading the register ECC_DECIRQ_STA. Then, the next sectors's decode IRQs will not be generated. Thirdly, if all sectors are decoded by comparing with ecc->sectors, then we will complete ecc->done, set ecc->sectors as 0, and disable ECC IRQ by programming the register ECC_IRQ_REG(op) as 0. Otherwise, wait for the next ECC IRQ. But, there is a timing issue between step one and two. When we read the reigster ECC_DECIRQ_STA, all sectors are decoded except the last sector, and the ECC IRQ signal is cleared. But the last sector is decoded before reading ECC_DECDONE, so the ECC IRQ signal is enabled again by ECC HW, and it means we will receive one extra ECC IRQ later. In step three, we will find that all sectors were decoded, then disable ECC IRQ and return. When deal with the extra ECC IRQ, the ECC IRQ status cannot be cleared anymore. That is because the register ECC_DECIRQ_STA can only be cleared when the register ECC_IRQ_REG(op) is enabled. But actually we have disabled ECC IRQ in the previous ECC IRQ handle. So, there will keep receiving ECC decode IRQ. Now, we read the register ECC_DECIRQ_STA once again before completing the ecc done event. This ensures that there will be no extra ECC decode IRQ. Also, remove writel(0, ecc->regs + ECC_IRQ_REG(op)) from irq handler, because ECC IRQ is disabled in mtk_ecc_disable(). And clear ECC_DECIRQ_STA in mtk_ecc_disable() in case there is a timeout to wait decode IRQ. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Cc: <stable@vger.kernel.org> Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-30 10:39:56 +08:00
/*
* Clear decode IRQ status in case there is a timeout to wait
* decode IRQ.
*/
readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
} else {
writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
}
writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));
mutex_unlock(&ecc->lock);
}
EXPORT_SYMBOL(mtk_ecc_disable);
int mtk_ecc_wait_done(struct mtk_ecc *ecc, enum mtk_ecc_operation op)
{
int ret;
ret = wait_for_completion_timeout(&ecc->done, msecs_to_jiffies(500));
if (!ret) {
dev_err(ecc->dev, "%s timeout - interrupt did not arrive)\n",
(op == ECC_ENCODE) ? "encoder" : "decoder");
return -ETIMEDOUT;
}
return 0;
}
EXPORT_SYMBOL(mtk_ecc_wait_done);
int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
u8 *data, u32 bytes)
{
dma_addr_t addr;
u32 len;
int ret;
addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE);
ret = dma_mapping_error(ecc->dev, addr);
if (ret) {
dev_err(ecc->dev, "dma mapping error\n");
return -EINVAL;
}
config->op = ECC_ENCODE;
config->addr = addr;
ret = mtk_ecc_enable(ecc, config);
if (ret) {
dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
return ret;
}
ret = mtk_ecc_wait_done(ecc, ECC_ENCODE);
if (ret)
goto timeout;
mtk_ecc_wait_idle(ecc, ECC_ENCODE);
/* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
len = (config->strength * ecc->caps->parity_bits + 7) >> 3;
/* write the parity bytes generated by the ECC back to temp buffer */
__ioread32_copy(ecc->eccdata,
ecc->regs + ecc->caps->ecc_regs[ECC_ENCPAR00],
round_up(len, 4));
/* copy into possibly unaligned OOB region with actual length */
memcpy(data + bytes, ecc->eccdata, len);
timeout:
dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
mtk_ecc_disable(ecc);
return ret;
}
EXPORT_SYMBOL(mtk_ecc_encode);
void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p)
{
const u8 *ecc_strength = ecc->caps->ecc_strength;
int i;
for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
if (*p <= ecc_strength[i]) {
if (!i)
*p = ecc_strength[i];
else if (*p != ecc_strength[i])
*p = ecc_strength[i - 1];
return;
}
}
*p = ecc_strength[ecc->caps->num_ecc_strength - 1];
}
EXPORT_SYMBOL(mtk_ecc_adjust_strength);
unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc)
{
return ecc->caps->parity_bits;
}
EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
.err_mask = ECC_ERRMASK_MT2701,
.err_shift = 8,
.ecc_strength = ecc_strength_mt2701,
.ecc_regs = mt2701_ecc_regs,
.num_ecc_strength = 20,
.ecc_mode_shift = 5,
.parity_bits = 14,
.pg_irq_sel = 0,
};
static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
.err_mask = ECC_ERRMASK_MT2712,
.err_shift = 8,
.ecc_strength = ecc_strength_mt2712,
.ecc_regs = mt2712_ecc_regs,
.num_ecc_strength = 23,
.ecc_mode_shift = 5,
.parity_bits = 14,
.pg_irq_sel = 1,
};
static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
.err_mask = ECC_ERRMASK_MT7622,
.err_shift = 5,
.ecc_strength = ecc_strength_mt7622,
.ecc_regs = mt7622_ecc_regs,
.num_ecc_strength = 5,
.ecc_mode_shift = 4,
.parity_bits = 13,
.pg_irq_sel = 0,
};
static const struct mtk_ecc_caps mtk_ecc_caps_mt7986 = {
.err_mask = ECC_ERRMASK_MT7622,
.err_shift = 8,
.ecc_strength = ecc_strength_mt7986,
.ecc_regs = mt2712_ecc_regs,
.num_ecc_strength = 11,
.ecc_mode_shift = 5,
.parity_bits = 14,
.pg_irq_sel = 1,
};
static const struct of_device_id mtk_ecc_dt_match[] = {
{
.compatible = "mediatek,mt2701-ecc",
.data = &mtk_ecc_caps_mt2701,
}, {
.compatible = "mediatek,mt2712-ecc",
.data = &mtk_ecc_caps_mt2712,
}, {
.compatible = "mediatek,mt7622-ecc",
.data = &mtk_ecc_caps_mt7622,
}, {
.compatible = "mediatek,mt7986-ecc",
.data = &mtk_ecc_caps_mt7986,
},
{},
};
static int mtk_ecc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mtk_ecc *ecc;
u32 max_eccdata_size;
int irq, ret;
ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
if (!ecc)
return -ENOMEM;
ecc->caps = of_device_get_match_data(dev);
max_eccdata_size = ecc->caps->num_ecc_strength - 1;
max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
max_eccdata_size = (max_eccdata_size * ecc->caps->parity_bits + 7) >> 3;
max_eccdata_size = round_up(max_eccdata_size, 4);
ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL);
if (!ecc->eccdata)
return -ENOMEM;
ecc->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ecc->regs))
return PTR_ERR(ecc->regs);
ecc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(ecc->clk)) {
dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk));
return PTR_ERR(ecc->clk);
}
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
ret = dma_set_mask(dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(dev, "failed to set DMA mask\n");
return ret;
}
ret = devm_request_irq(dev, irq, mtk_ecc_irq, 0x0, "mtk-ecc", ecc);
if (ret) {
dev_err(dev, "failed to request irq\n");
return -EINVAL;
}
ecc->dev = dev;
mutex_init(&ecc->lock);
platform_set_drvdata(pdev, ecc);
dev_info(dev, "probed\n");
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mtk_ecc_suspend(struct device *dev)
{
struct mtk_ecc *ecc = dev_get_drvdata(dev);
clk_disable_unprepare(ecc->clk);
return 0;
}
static int mtk_ecc_resume(struct device *dev)
{
struct mtk_ecc *ecc = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(ecc->clk);
if (ret) {
dev_err(dev, "failed to enable clk\n");
return ret;
}
return 0;
}
static SIMPLE_DEV_PM_OPS(mtk_ecc_pm_ops, mtk_ecc_suspend, mtk_ecc_resume);
#endif
MODULE_DEVICE_TABLE(of, mtk_ecc_dt_match);
static struct platform_driver mtk_ecc_driver = {
.probe = mtk_ecc_probe,
.driver = {
.name = "mtk-ecc",
.of_match_table = mtk_ecc_dt_match,
#ifdef CONFIG_PM_SLEEP
.pm = &mtk_ecc_pm_ops,
#endif
},
};
module_platform_driver(mtk_ecc_driver);
MODULE_AUTHOR("Xiaolei Li <xiaolei.li@mediatek.com>");
MODULE_DESCRIPTION("MTK Nand ECC Driver");
MODULE_LICENSE("Dual MIT/GPL");