2020-10-29 10:59:01 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
// Copyright (c) 2020 Intel Corporation.
|
|
|
|
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <linux/acpi.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
#include <media/v4l2-device.h>
|
|
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
|
|
|
|
#define OV9734_LINK_FREQ_180MHZ 180000000ULL
|
|
|
|
#define OV9734_SCLK 36000000LL
|
|
|
|
#define OV9734_MCLK 19200000
|
|
|
|
/* ov9734 only support 1-lane mipi output */
|
|
|
|
#define OV9734_DATA_LANES 1
|
|
|
|
#define OV9734_RGB_DEPTH 10
|
|
|
|
|
|
|
|
#define OV9734_REG_CHIP_ID 0x300a
|
|
|
|
#define OV9734_CHIP_ID 0x9734
|
|
|
|
|
|
|
|
#define OV9734_REG_MODE_SELECT 0x0100
|
|
|
|
#define OV9734_MODE_STANDBY 0x00
|
|
|
|
#define OV9734_MODE_STREAMING 0x01
|
|
|
|
|
|
|
|
/* vertical-timings from sensor */
|
|
|
|
#define OV9734_REG_VTS 0x380e
|
|
|
|
#define OV9734_VTS_30FPS 0x0322
|
|
|
|
#define OV9734_VTS_30FPS_MIN 0x0322
|
|
|
|
#define OV9734_VTS_MAX 0x7fff
|
|
|
|
|
|
|
|
/* horizontal-timings from sensor */
|
|
|
|
#define OV9734_REG_HTS 0x380c
|
|
|
|
|
|
|
|
/* Exposure controls from sensor */
|
|
|
|
#define OV9734_REG_EXPOSURE 0x3500
|
|
|
|
#define OV9734_EXPOSURE_MIN 4
|
|
|
|
#define OV9734_EXPOSURE_MAX_MARGIN 4
|
|
|
|
#define OV9734_EXPOSURE_STEP 1
|
|
|
|
|
|
|
|
/* Analog gain controls from sensor */
|
|
|
|
#define OV9734_REG_ANALOG_GAIN 0x350a
|
|
|
|
#define OV9734_ANAL_GAIN_MIN 16
|
|
|
|
#define OV9734_ANAL_GAIN_MAX 248
|
|
|
|
#define OV9734_ANAL_GAIN_STEP 1
|
|
|
|
|
|
|
|
/* Digital gain controls from sensor */
|
|
|
|
#define OV9734_REG_MWB_R_GAIN 0x5180
|
|
|
|
#define OV9734_REG_MWB_G_GAIN 0x5182
|
|
|
|
#define OV9734_REG_MWB_B_GAIN 0x5184
|
|
|
|
#define OV9734_DGTL_GAIN_MIN 256
|
|
|
|
#define OV9734_DGTL_GAIN_MAX 1023
|
|
|
|
#define OV9734_DGTL_GAIN_STEP 1
|
|
|
|
#define OV9734_DGTL_GAIN_DEFAULT 256
|
|
|
|
|
|
|
|
/* Test Pattern Control */
|
|
|
|
#define OV9734_REG_TEST_PATTERN 0x5080
|
|
|
|
#define OV9734_TEST_PATTERN_ENABLE BIT(7)
|
|
|
|
#define OV9734_TEST_PATTERN_BAR_SHIFT 2
|
|
|
|
|
2021-07-05 15:14:15 +08:00
|
|
|
/* Group Access */
|
|
|
|
#define OV9734_REG_GROUP_ACCESS 0x3208
|
|
|
|
#define OV9734_GROUP_HOLD_START 0x0
|
|
|
|
#define OV9734_GROUP_HOLD_END 0x10
|
|
|
|
#define OV9734_GROUP_HOLD_LAUNCH 0xa0
|
|
|
|
|
2020-10-29 10:59:01 +08:00
|
|
|
enum {
|
|
|
|
OV9734_LINK_FREQ_180MHZ_INDEX,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ov9734_reg {
|
|
|
|
u16 address;
|
|
|
|
u8 val;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ov9734_reg_list {
|
|
|
|
u32 num_of_regs;
|
|
|
|
const struct ov9734_reg *regs;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ov9734_link_freq_config {
|
|
|
|
const struct ov9734_reg_list reg_list;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ov9734_mode {
|
|
|
|
/* Frame width in pixels */
|
|
|
|
u32 width;
|
|
|
|
|
|
|
|
/* Frame height in pixels */
|
|
|
|
u32 height;
|
|
|
|
|
|
|
|
/* Horizontal timining size */
|
|
|
|
u32 hts;
|
|
|
|
|
|
|
|
/* Default vertical timining size */
|
|
|
|
u32 vts_def;
|
|
|
|
|
|
|
|
/* Min vertical timining size */
|
|
|
|
u32 vts_min;
|
|
|
|
|
|
|
|
/* Link frequency needed for this resolution */
|
|
|
|
u32 link_freq_index;
|
|
|
|
|
|
|
|
/* Sensor register settings for this resolution */
|
|
|
|
const struct ov9734_reg_list reg_list;
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct ov9734_reg mipi_data_rate_360mbps[] = {
|
|
|
|
{0x3030, 0x19},
|
|
|
|
{0x3080, 0x02},
|
|
|
|
{0x3081, 0x4b},
|
|
|
|
{0x3082, 0x04},
|
|
|
|
{0x3083, 0x00},
|
|
|
|
{0x3084, 0x02},
|
|
|
|
{0x3085, 0x01},
|
|
|
|
{0x3086, 0x01},
|
|
|
|
{0x3089, 0x01},
|
|
|
|
{0x308a, 0x00},
|
|
|
|
{0x301e, 0x15},
|
|
|
|
{0x3103, 0x01},
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct ov9734_reg mode_1296x734_regs[] = {
|
|
|
|
{0x3001, 0x00},
|
|
|
|
{0x3002, 0x00},
|
|
|
|
{0x3007, 0x00},
|
|
|
|
{0x3010, 0x00},
|
|
|
|
{0x3011, 0x08},
|
|
|
|
{0x3014, 0x22},
|
|
|
|
{0x3600, 0x55},
|
|
|
|
{0x3601, 0x02},
|
|
|
|
{0x3605, 0x22},
|
|
|
|
{0x3611, 0xe7},
|
|
|
|
{0x3654, 0x10},
|
|
|
|
{0x3655, 0x77},
|
|
|
|
{0x3656, 0x77},
|
|
|
|
{0x3657, 0x07},
|
|
|
|
{0x3658, 0x22},
|
|
|
|
{0x3659, 0x22},
|
|
|
|
{0x365a, 0x02},
|
|
|
|
{0x3784, 0x05},
|
|
|
|
{0x3785, 0x55},
|
|
|
|
{0x37c0, 0x07},
|
|
|
|
{0x3800, 0x00},
|
|
|
|
{0x3801, 0x04},
|
|
|
|
{0x3802, 0x00},
|
|
|
|
{0x3803, 0x04},
|
|
|
|
{0x3804, 0x05},
|
|
|
|
{0x3805, 0x0b},
|
|
|
|
{0x3806, 0x02},
|
|
|
|
{0x3807, 0xdb},
|
|
|
|
{0x3808, 0x05},
|
|
|
|
{0x3809, 0x00},
|
|
|
|
{0x380a, 0x02},
|
|
|
|
{0x380b, 0xd0},
|
|
|
|
{0x380c, 0x05},
|
|
|
|
{0x380d, 0xc6},
|
|
|
|
{0x380e, 0x03},
|
|
|
|
{0x380f, 0x22},
|
|
|
|
{0x3810, 0x00},
|
|
|
|
{0x3811, 0x04},
|
|
|
|
{0x3812, 0x00},
|
|
|
|
{0x3813, 0x04},
|
|
|
|
{0x3816, 0x00},
|
|
|
|
{0x3817, 0x00},
|
|
|
|
{0x3818, 0x00},
|
|
|
|
{0x3819, 0x04},
|
|
|
|
{0x3820, 0x18},
|
|
|
|
{0x3821, 0x00},
|
|
|
|
{0x382c, 0x06},
|
|
|
|
{0x3500, 0x00},
|
|
|
|
{0x3501, 0x31},
|
|
|
|
{0x3502, 0x00},
|
|
|
|
{0x3503, 0x03},
|
|
|
|
{0x3504, 0x00},
|
|
|
|
{0x3505, 0x00},
|
|
|
|
{0x3509, 0x10},
|
|
|
|
{0x350a, 0x00},
|
|
|
|
{0x350b, 0x40},
|
|
|
|
{0x3d00, 0x00},
|
|
|
|
{0x3d01, 0x00},
|
|
|
|
{0x3d02, 0x00},
|
|
|
|
{0x3d03, 0x00},
|
|
|
|
{0x3d04, 0x00},
|
|
|
|
{0x3d05, 0x00},
|
|
|
|
{0x3d06, 0x00},
|
|
|
|
{0x3d07, 0x00},
|
|
|
|
{0x3d08, 0x00},
|
|
|
|
{0x3d09, 0x00},
|
|
|
|
{0x3d0a, 0x00},
|
|
|
|
{0x3d0b, 0x00},
|
|
|
|
{0x3d0c, 0x00},
|
|
|
|
{0x3d0d, 0x00},
|
|
|
|
{0x3d0e, 0x00},
|
|
|
|
{0x3d0f, 0x00},
|
|
|
|
{0x3d80, 0x00},
|
|
|
|
{0x3d81, 0x00},
|
|
|
|
{0x3d82, 0x38},
|
|
|
|
{0x3d83, 0xa4},
|
|
|
|
{0x3d84, 0x00},
|
|
|
|
{0x3d85, 0x00},
|
|
|
|
{0x3d86, 0x1f},
|
|
|
|
{0x3d87, 0x03},
|
|
|
|
{0x3d8b, 0x00},
|
|
|
|
{0x3d8f, 0x00},
|
|
|
|
{0x4001, 0xe0},
|
|
|
|
{0x4009, 0x0b},
|
|
|
|
{0x4300, 0x03},
|
|
|
|
{0x4301, 0xff},
|
|
|
|
{0x4304, 0x00},
|
|
|
|
{0x4305, 0x00},
|
|
|
|
{0x4309, 0x00},
|
|
|
|
{0x4600, 0x00},
|
|
|
|
{0x4601, 0x80},
|
|
|
|
{0x4800, 0x00},
|
|
|
|
{0x4805, 0x00},
|
|
|
|
{0x4821, 0x50},
|
|
|
|
{0x4823, 0x50},
|
|
|
|
{0x4837, 0x2d},
|
|
|
|
{0x4a00, 0x00},
|
|
|
|
{0x4f00, 0x80},
|
|
|
|
{0x4f01, 0x10},
|
|
|
|
{0x4f02, 0x00},
|
|
|
|
{0x4f03, 0x00},
|
|
|
|
{0x4f04, 0x00},
|
|
|
|
{0x4f05, 0x00},
|
|
|
|
{0x4f06, 0x00},
|
|
|
|
{0x4f07, 0x00},
|
|
|
|
{0x4f08, 0x00},
|
|
|
|
{0x4f09, 0x00},
|
|
|
|
{0x5000, 0x2f},
|
|
|
|
{0x500c, 0x00},
|
|
|
|
{0x500d, 0x00},
|
|
|
|
{0x500e, 0x00},
|
|
|
|
{0x500f, 0x00},
|
|
|
|
{0x5010, 0x00},
|
|
|
|
{0x5011, 0x00},
|
|
|
|
{0x5012, 0x00},
|
|
|
|
{0x5013, 0x00},
|
|
|
|
{0x5014, 0x00},
|
|
|
|
{0x5015, 0x00},
|
|
|
|
{0x5016, 0x00},
|
|
|
|
{0x5017, 0x00},
|
|
|
|
{0x5080, 0x00},
|
|
|
|
{0x5180, 0x01},
|
|
|
|
{0x5181, 0x00},
|
|
|
|
{0x5182, 0x01},
|
|
|
|
{0x5183, 0x00},
|
|
|
|
{0x5184, 0x01},
|
|
|
|
{0x5185, 0x00},
|
|
|
|
{0x5708, 0x06},
|
|
|
|
{0x380f, 0x2a},
|
|
|
|
{0x5780, 0x3e},
|
|
|
|
{0x5781, 0x0f},
|
|
|
|
{0x5782, 0x44},
|
|
|
|
{0x5783, 0x02},
|
|
|
|
{0x5784, 0x01},
|
|
|
|
{0x5785, 0x01},
|
|
|
|
{0x5786, 0x00},
|
|
|
|
{0x5787, 0x04},
|
|
|
|
{0x5788, 0x02},
|
|
|
|
{0x5789, 0x0f},
|
|
|
|
{0x578a, 0xfd},
|
|
|
|
{0x578b, 0xf5},
|
|
|
|
{0x578c, 0xf5},
|
|
|
|
{0x578d, 0x03},
|
|
|
|
{0x578e, 0x08},
|
|
|
|
{0x578f, 0x0c},
|
|
|
|
{0x5790, 0x08},
|
|
|
|
{0x5791, 0x04},
|
|
|
|
{0x5792, 0x00},
|
|
|
|
{0x5793, 0x52},
|
|
|
|
{0x5794, 0xa3},
|
|
|
|
{0x5000, 0x3f},
|
|
|
|
{0x3801, 0x00},
|
|
|
|
{0x3803, 0x00},
|
|
|
|
{0x3805, 0x0f},
|
|
|
|
{0x3807, 0xdf},
|
|
|
|
{0x3809, 0x10},
|
|
|
|
{0x380b, 0xde},
|
|
|
|
{0x3811, 0x00},
|
|
|
|
{0x3813, 0x01},
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char * const ov9734_test_pattern_menu[] = {
|
|
|
|
"Disabled",
|
|
|
|
"Standard Color Bar",
|
|
|
|
"Top-Bottom Darker Color Bar",
|
|
|
|
"Right-Left Darker Color Bar",
|
|
|
|
"Bottom-Top Darker Color Bar",
|
|
|
|
};
|
|
|
|
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
|
|
OV9734_LINK_FREQ_180MHZ,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct ov9734_link_freq_config link_freq_configs[] = {
|
|
|
|
[OV9734_LINK_FREQ_180MHZ_INDEX] = {
|
|
|
|
.reg_list = {
|
|
|
|
.num_of_regs = ARRAY_SIZE(mipi_data_rate_360mbps),
|
|
|
|
.regs = mipi_data_rate_360mbps,
|
|
|
|
}
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct ov9734_mode supported_modes[] = {
|
|
|
|
{
|
|
|
|
.width = 1296,
|
|
|
|
.height = 734,
|
|
|
|
.hts = 0x5c6,
|
|
|
|
.vts_def = OV9734_VTS_30FPS,
|
|
|
|
.vts_min = OV9734_VTS_30FPS_MIN,
|
|
|
|
.reg_list = {
|
|
|
|
.num_of_regs = ARRAY_SIZE(mode_1296x734_regs),
|
|
|
|
.regs = mode_1296x734_regs,
|
|
|
|
},
|
|
|
|
.link_freq_index = OV9734_LINK_FREQ_180MHZ_INDEX,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ov9734 {
|
|
|
|
struct v4l2_subdev sd;
|
|
|
|
struct media_pad pad;
|
|
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
|
|
|
|
/* V4L2 Controls */
|
|
|
|
struct v4l2_ctrl *link_freq;
|
|
|
|
struct v4l2_ctrl *pixel_rate;
|
|
|
|
struct v4l2_ctrl *vblank;
|
|
|
|
struct v4l2_ctrl *hblank;
|
|
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
|
|
|
|
/* Current mode */
|
|
|
|
const struct ov9734_mode *cur_mode;
|
|
|
|
|
|
|
|
/* To serialize asynchronus callbacks */
|
|
|
|
struct mutex mutex;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct ov9734 *to_ov9734(struct v4l2_subdev *subdev)
|
|
|
|
{
|
|
|
|
return container_of(subdev, struct ov9734, sd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u64 to_pixel_rate(u32 f_index)
|
|
|
|
{
|
|
|
|
u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV9734_DATA_LANES;
|
|
|
|
|
|
|
|
do_div(pixel_rate, OV9734_RGB_DEPTH);
|
|
|
|
|
|
|
|
return pixel_rate;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u64 to_pixels_per_line(u32 hts, u32 f_index)
|
|
|
|
{
|
|
|
|
u64 ppl = hts * to_pixel_rate(f_index);
|
|
|
|
|
|
|
|
do_div(ppl, OV9734_SCLK);
|
|
|
|
|
|
|
|
return ppl;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_read_reg(struct ov9734 *ov9734, u16 reg, u16 len, u32 *val)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
struct i2c_msg msgs[2];
|
|
|
|
u8 addr_buf[2];
|
|
|
|
u8 data_buf[4] = {0};
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (len > sizeof(data_buf))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
put_unaligned_be16(reg, addr_buf);
|
|
|
|
msgs[0].addr = client->addr;
|
|
|
|
msgs[0].flags = 0;
|
|
|
|
msgs[0].len = sizeof(addr_buf);
|
|
|
|
msgs[0].buf = addr_buf;
|
|
|
|
msgs[1].addr = client->addr;
|
|
|
|
msgs[1].flags = I2C_M_RD;
|
|
|
|
msgs[1].len = len;
|
|
|
|
msgs[1].buf = &data_buf[sizeof(data_buf) - len];
|
|
|
|
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_write_reg(struct ov9734 *ov9734, u16 reg, u16 len, u32 val)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
u8 buf[6];
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (len > 4)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
|
|
put_unaligned_be32(val << 8 * (4 - len), buf + 2);
|
|
|
|
|
|
|
|
ret = i2c_master_send(client, buf, len + 2);
|
|
|
|
if (ret != len + 2)
|
|
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_write_reg_list(struct ov9734 *ov9734,
|
|
|
|
const struct ov9734_reg_list *r_list)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
for (i = 0; i < r_list->num_of_regs; i++) {
|
|
|
|
ret = ov9734_write_reg(ov9734, r_list->regs[i].address, 1,
|
|
|
|
r_list->regs[i].val);
|
|
|
|
if (ret) {
|
|
|
|
dev_err_ratelimited(&client->dev,
|
|
|
|
"write reg 0x%4.4x return err = %d",
|
|
|
|
r_list->regs[i].address, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_update_digital_gain(struct ov9734 *ov9734, u32 d_gain)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2021-07-05 15:14:15 +08:00
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_GROUP_ACCESS, 1,
|
|
|
|
OV9734_GROUP_HOLD_START);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2020-10-29 10:59:01 +08:00
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_MWB_R_GAIN, 2, d_gain);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_MWB_G_GAIN, 2, d_gain);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2021-07-05 15:14:15 +08:00
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_MWB_B_GAIN, 2, d_gain);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_GROUP_ACCESS, 1,
|
|
|
|
OV9734_GROUP_HOLD_END);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_GROUP_ACCESS, 1,
|
|
|
|
OV9734_GROUP_HOLD_LAUNCH);
|
|
|
|
return ret;
|
2020-10-29 10:59:01 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_test_pattern(struct ov9734 *ov9734, u32 pattern)
|
|
|
|
{
|
|
|
|
if (pattern)
|
|
|
|
pattern = (pattern - 1) << OV9734_TEST_PATTERN_BAR_SHIFT |
|
|
|
|
OV9734_TEST_PATTERN_ENABLE;
|
|
|
|
|
|
|
|
return ov9734_write_reg(ov9734, OV9734_REG_TEST_PATTERN, 1, pattern);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
|
|
{
|
|
|
|
struct ov9734 *ov9734 = container_of(ctrl->handler,
|
|
|
|
struct ov9734, ctrl_handler);
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
s64 exposure_max;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
|
|
/* Update max exposure while meeting expected vblanking */
|
|
|
|
exposure_max = ov9734->cur_mode->height + ctrl->val -
|
|
|
|
OV9734_EXPOSURE_MAX_MARGIN;
|
|
|
|
__v4l2_ctrl_modify_range(ov9734->exposure,
|
|
|
|
ov9734->exposure->minimum,
|
|
|
|
exposure_max, ov9734->exposure->step,
|
|
|
|
exposure_max);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* V4L2 controls values will be applied only when power is already up */
|
|
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_ANALOG_GAIN,
|
|
|
|
2, ctrl->val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
|
|
ret = ov9734_update_digital_gain(ov9734, ctrl->val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_EXPOSURE:
|
|
|
|
/* 4 least significant bits of expsoure are fractional part */
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_EXPOSURE,
|
|
|
|
3, ctrl->val << 4);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_VBLANK:
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_VTS, 2,
|
|
|
|
ov9734->cur_mode->height + ctrl->val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case V4L2_CID_TEST_PATTERN:
|
|
|
|
ret = ov9734_test_pattern(ov9734, ctrl->val);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
ret = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct v4l2_ctrl_ops ov9734_ctrl_ops = {
|
|
|
|
.s_ctrl = ov9734_set_ctrl,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ov9734_init_controls(struct ov9734 *ov9734)
|
|
|
|
{
|
|
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
|
|
const struct ov9734_mode *cur_mode;
|
|
|
|
s64 exposure_max, h_blank, pixel_rate;
|
|
|
|
u32 vblank_min, vblank_max, vblank_default;
|
|
|
|
int ret, size;
|
|
|
|
|
|
|
|
ctrl_hdlr = &ov9734->ctrl_handler;
|
|
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ctrl_hdlr->lock = &ov9734->mutex;
|
|
|
|
cur_mode = ov9734->cur_mode;
|
|
|
|
size = ARRAY_SIZE(link_freq_menu_items);
|
|
|
|
ov9734->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov9734_ctrl_ops,
|
|
|
|
V4L2_CID_LINK_FREQ,
|
|
|
|
size - 1, 0,
|
|
|
|
link_freq_menu_items);
|
|
|
|
if (ov9734->link_freq)
|
|
|
|
ov9734->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
|
|
|
|
pixel_rate = to_pixel_rate(OV9734_LINK_FREQ_180MHZ_INDEX);
|
|
|
|
ov9734->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov9734_ctrl_ops,
|
|
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
|
|
pixel_rate, 1, pixel_rate);
|
|
|
|
vblank_min = cur_mode->vts_min - cur_mode->height;
|
|
|
|
vblank_max = OV9734_VTS_MAX - cur_mode->height;
|
|
|
|
vblank_default = cur_mode->vts_def - cur_mode->height;
|
|
|
|
ov9734->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov9734_ctrl_ops,
|
|
|
|
V4L2_CID_VBLANK, vblank_min,
|
|
|
|
vblank_max, 1, vblank_default);
|
|
|
|
h_blank = to_pixels_per_line(cur_mode->hts, cur_mode->link_freq_index);
|
|
|
|
h_blank -= cur_mode->width;
|
|
|
|
ov9734->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov9734_ctrl_ops,
|
|
|
|
V4L2_CID_HBLANK, h_blank, h_blank, 1,
|
|
|
|
h_blank);
|
|
|
|
if (ov9734->hblank)
|
|
|
|
ov9734->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &ov9734_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
|
|
OV9734_ANAL_GAIN_MIN, OV9734_ANAL_GAIN_MAX,
|
|
|
|
OV9734_ANAL_GAIN_STEP, OV9734_ANAL_GAIN_MIN);
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &ov9734_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
|
|
OV9734_DGTL_GAIN_MIN, OV9734_DGTL_GAIN_MAX,
|
|
|
|
OV9734_DGTL_GAIN_STEP, OV9734_DGTL_GAIN_DEFAULT);
|
|
|
|
exposure_max = ov9734->cur_mode->vts_def - OV9734_EXPOSURE_MAX_MARGIN;
|
|
|
|
ov9734->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov9734_ctrl_ops,
|
|
|
|
V4L2_CID_EXPOSURE,
|
|
|
|
OV9734_EXPOSURE_MIN, exposure_max,
|
|
|
|
OV9734_EXPOSURE_STEP,
|
|
|
|
exposure_max);
|
|
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov9734_ctrl_ops,
|
|
|
|
V4L2_CID_TEST_PATTERN,
|
|
|
|
ARRAY_SIZE(ov9734_test_pattern_menu) - 1,
|
|
|
|
0, 0, ov9734_test_pattern_menu);
|
|
|
|
if (ctrl_hdlr->error)
|
|
|
|
return ctrl_hdlr->error;
|
|
|
|
|
|
|
|
ov9734->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ov9734_update_pad_format(const struct ov9734_mode *mode,
|
|
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
|
|
{
|
|
|
|
fmt->width = mode->width;
|
|
|
|
fmt->height = mode->height;
|
|
|
|
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_start_streaming(struct ov9734 *ov9734)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
const struct ov9734_reg_list *reg_list;
|
|
|
|
int link_freq_index, ret;
|
|
|
|
|
|
|
|
link_freq_index = ov9734->cur_mode->link_freq_index;
|
|
|
|
reg_list = &link_freq_configs[link_freq_index].reg_list;
|
|
|
|
ret = ov9734_write_reg_list(ov9734, reg_list);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev, "failed to set plls");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg_list = &ov9734->cur_mode->reg_list;
|
|
|
|
ret = ov9734_write_reg_list(ov9734, reg_list);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev, "failed to set mode");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = __v4l2_ctrl_handler_setup(ov9734->sd.ctrl_handler);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = ov9734_write_reg(ov9734, OV9734_REG_MODE_SELECT,
|
|
|
|
1, OV9734_MODE_STREAMING);
|
|
|
|
if (ret)
|
|
|
|
dev_err(&client->dev, "failed to start stream");
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ov9734_stop_streaming(struct ov9734 *ov9734)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
|
|
|
|
if (ov9734_write_reg(ov9734, OV9734_REG_MODE_SELECT,
|
|
|
|
1, OV9734_MODE_STANDBY))
|
|
|
|
dev_err(&client->dev, "failed to stop stream");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_set_stream(struct v4l2_subdev *sd, int enable)
|
|
|
|
{
|
|
|
|
struct ov9734 *ov9734 = to_ov9734(sd);
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
int ret = 0;
|
|
|
|
|
2020-11-27 11:48:12 +08:00
|
|
|
mutex_lock(&ov9734->mutex);
|
2020-10-29 10:59:01 +08:00
|
|
|
|
|
|
|
if (enable) {
|
2021-04-23 23:19:16 +08:00
|
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
2020-10-29 10:59:01 +08:00
|
|
|
if (ret < 0) {
|
|
|
|
mutex_unlock(&ov9734->mutex);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = ov9734_start_streaming(ov9734);
|
|
|
|
if (ret) {
|
|
|
|
enable = 0;
|
|
|
|
ov9734_stop_streaming(ov9734);
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
ov9734_stop_streaming(ov9734);
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&ov9734->mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_set_format(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2020-10-29 10:59:01 +08:00
|
|
|
struct v4l2_subdev_format *fmt)
|
|
|
|
{
|
|
|
|
struct ov9734 *ov9734 = to_ov9734(sd);
|
|
|
|
const struct ov9734_mode *mode;
|
|
|
|
s32 vblank_def, h_blank;
|
|
|
|
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
|
|
ARRAY_SIZE(supported_modes), width,
|
|
|
|
height, fmt->format.width,
|
|
|
|
fmt->format.height);
|
|
|
|
|
|
|
|
mutex_lock(&ov9734->mutex);
|
|
|
|
ov9734_update_pad_format(mode, &fmt->format);
|
|
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
|
2020-10-29 10:59:01 +08:00
|
|
|
} else {
|
|
|
|
ov9734->cur_mode = mode;
|
|
|
|
__v4l2_ctrl_s_ctrl(ov9734->link_freq, mode->link_freq_index);
|
|
|
|
__v4l2_ctrl_s_ctrl_int64(ov9734->pixel_rate,
|
|
|
|
to_pixel_rate(mode->link_freq_index));
|
|
|
|
|
|
|
|
/* Update limits and set FPS to default */
|
|
|
|
vblank_def = mode->vts_def - mode->height;
|
|
|
|
__v4l2_ctrl_modify_range(ov9734->vblank,
|
|
|
|
mode->vts_min - mode->height,
|
|
|
|
OV9734_VTS_MAX - mode->height, 1,
|
|
|
|
vblank_def);
|
|
|
|
__v4l2_ctrl_s_ctrl(ov9734->vblank, vblank_def);
|
|
|
|
h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
|
|
|
|
mode->width;
|
|
|
|
__v4l2_ctrl_modify_range(ov9734->hblank, h_blank, h_blank, 1,
|
|
|
|
h_blank);
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&ov9734->mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_get_format(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2020-10-29 10:59:01 +08:00
|
|
|
struct v4l2_subdev_format *fmt)
|
|
|
|
{
|
|
|
|
struct ov9734 *ov9734 = to_ov9734(sd);
|
|
|
|
|
|
|
|
mutex_lock(&ov9734->mutex);
|
|
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
fmt->format = *v4l2_subdev_get_try_format(&ov9734->sd,
|
|
|
|
sd_state,
|
2020-10-29 10:59:01 +08:00
|
|
|
fmt->pad);
|
|
|
|
else
|
|
|
|
ov9734_update_pad_format(ov9734->cur_mode, &fmt->format);
|
|
|
|
|
|
|
|
mutex_unlock(&ov9734->mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_enum_mbus_code(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2020-10-29 10:59:01 +08:00
|
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
|
|
{
|
|
|
|
if (code->index > 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_enum_frame_size(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2020-10-29 10:59:01 +08:00
|
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
|
|
{
|
|
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
|
|
fse->max_width = fse->min_width;
|
|
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
fse->max_height = fse->min_height;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
|
|
{
|
|
|
|
struct ov9734 *ov9734 = to_ov9734(sd);
|
|
|
|
|
|
|
|
mutex_lock(&ov9734->mutex);
|
|
|
|
ov9734_update_pad_format(&supported_modes[0],
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 22:55:58 +08:00
|
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0));
|
2020-10-29 10:59:01 +08:00
|
|
|
mutex_unlock(&ov9734->mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_video_ops ov9734_video_ops = {
|
|
|
|
.s_stream = ov9734_set_stream,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_pad_ops ov9734_pad_ops = {
|
|
|
|
.set_fmt = ov9734_set_format,
|
|
|
|
.get_fmt = ov9734_get_format,
|
|
|
|
.enum_mbus_code = ov9734_enum_mbus_code,
|
|
|
|
.enum_frame_size = ov9734_enum_frame_size,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_ops ov9734_subdev_ops = {
|
|
|
|
.video = &ov9734_video_ops,
|
|
|
|
.pad = &ov9734_pad_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct media_entity_operations ov9734_subdev_entity_ops = {
|
|
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_internal_ops ov9734_internal_ops = {
|
|
|
|
.open = ov9734_open,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ov9734_identify_module(struct ov9734 *ov9734)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(&ov9734->sd);
|
|
|
|
int ret;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
ret = ov9734_read_reg(ov9734, OV9734_REG_CHIP_ID, 2, &val);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (val != OV9734_CHIP_ID) {
|
|
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x",
|
|
|
|
OV9734_CHIP_ID, val);
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_check_hwcfg(struct device *dev)
|
|
|
|
{
|
|
|
|
struct fwnode_handle *ep;
|
|
|
|
struct fwnode_handle *fwnode = dev_fwnode(dev);
|
|
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
|
|
};
|
|
|
|
u32 mclk;
|
|
|
|
int ret;
|
|
|
|
unsigned int i, j;
|
|
|
|
|
|
|
|
if (!fwnode)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (mclk != OV9734_MCLK) {
|
|
|
|
dev_err(dev, "external clock %d is not supported", mclk);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
|
|
if (!ep)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
|
|
|
|
fwnode_handle_put(ep);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
|
|
dev_err(dev, "no link frequencies defined");
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto check_hwcfg_error;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
|
|
|
|
for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
|
|
|
|
if (link_freq_menu_items[i] ==
|
|
|
|
bus_cfg.link_frequencies[j])
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (j == bus_cfg.nr_of_link_frequencies) {
|
|
|
|
dev_err(dev, "no link frequency %lld supported",
|
|
|
|
link_freq_menu_items[i]);
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto check_hwcfg_error;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
check_hwcfg_error:
|
|
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2022-08-15 16:02:30 +08:00
|
|
|
static void ov9734_remove(struct i2c_client *client)
|
2020-10-29 10:59:01 +08:00
|
|
|
{
|
|
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
struct ov9734 *ov9734 = to_ov9734(sd);
|
|
|
|
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
|
|
media_entity_cleanup(&sd->entity);
|
|
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
|
|
mutex_destroy(&ov9734->mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ov9734_probe(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct ov9734 *ov9734;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = ov9734_check_hwcfg(&client->dev);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev, "failed to check HW configuration: %d",
|
|
|
|
ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ov9734 = devm_kzalloc(&client->dev, sizeof(*ov9734), GFP_KERNEL);
|
|
|
|
if (!ov9734)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
v4l2_i2c_subdev_init(&ov9734->sd, client, &ov9734_subdev_ops);
|
|
|
|
ret = ov9734_identify_module(ov9734);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev, "failed to find sensor: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_init(&ov9734->mutex);
|
|
|
|
ov9734->cur_mode = &supported_modes[0];
|
|
|
|
ret = ov9734_init_controls(ov9734);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev, "failed to init controls: %d", ret);
|
|
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
ov9734->sd.internal_ops = &ov9734_internal_ops;
|
|
|
|
ov9734->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
|
|
ov9734->sd.entity.ops = &ov9734_subdev_entity_ops;
|
|
|
|
ov9734->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
ov9734->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
ret = media_entity_pads_init(&ov9734->sd.entity, 1, &ov9734->pad);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&client->dev, "failed to init entity pads: %d", ret);
|
|
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
|
|
}
|
|
|
|
|
2021-03-06 00:42:34 +08:00
|
|
|
ret = v4l2_async_register_subdev_sensor(&ov9734->sd);
|
2020-10-29 10:59:01 +08:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&client->dev, "failed to register V4L2 subdev: %d",
|
|
|
|
ret);
|
|
|
|
goto probe_error_media_entity_cleanup;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Device is already turned on by i2c-core with ACPI domain PM.
|
|
|
|
* Enable runtime PM and turn off the device.
|
|
|
|
*/
|
|
|
|
pm_runtime_set_active(&client->dev);
|
|
|
|
pm_runtime_enable(&client->dev);
|
|
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
probe_error_media_entity_cleanup:
|
|
|
|
media_entity_cleanup(&ov9734->sd.entity);
|
|
|
|
|
|
|
|
probe_error_v4l2_ctrl_handler_free:
|
|
|
|
v4l2_ctrl_handler_free(ov9734->sd.ctrl_handler);
|
|
|
|
mutex_destroy(&ov9734->mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct acpi_device_id ov9734_acpi_ids[] = {
|
|
|
|
{ "OVTI9734", },
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(acpi, ov9734_acpi_ids);
|
|
|
|
|
|
|
|
static struct i2c_driver ov9734_i2c_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "ov9734",
|
|
|
|
.acpi_match_table = ov9734_acpi_ids,
|
|
|
|
},
|
2023-05-14 20:04:07 +08:00
|
|
|
.probe = ov9734_probe,
|
2020-10-29 10:59:01 +08:00
|
|
|
.remove = ov9734_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_i2c_driver(ov9734_i2c_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Qiu, Tianshu <tian.shu.qiu@intel.com>");
|
|
|
|
MODULE_AUTHOR("Bingbu Cao <bingbu.cao@intel.com>");
|
|
|
|
MODULE_DESCRIPTION("OmniVision OV9734 sensor driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|