linux/drivers/iio/dac/ad5593r.c

151 lines
3.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* AD5593R Digital <-> Analog converters driver
*
* Copyright 2015-2016 Analog Devices Inc.
* Author: Paul Cercueil <paul.cercueil@analog.com>
*/
#include "ad5592r-base.h"
#include <linux/bitops.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <asm/unaligned.h>
#define AD5593R_MODE_CONF (0 << 4)
#define AD5593R_MODE_DAC_WRITE (1 << 4)
#define AD5593R_MODE_ADC_READBACK (4 << 4)
#define AD5593R_MODE_DAC_READBACK (5 << 4)
#define AD5593R_MODE_GPIO_READBACK (6 << 4)
#define AD5593R_MODE_REG_READBACK (7 << 4)
static int ad5593r_read_word(struct i2c_client *i2c, u8 reg, u16 *value)
{
int ret;
u8 buf[2];
ret = i2c_smbus_write_byte(i2c, reg);
if (ret < 0)
return ret;
ret = i2c_master_recv(i2c, buf, sizeof(buf));
if (ret < 0)
return ret;
*value = get_unaligned_be16(buf);
return 0;
}
static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
return i2c_smbus_write_word_swapped(i2c,
AD5593R_MODE_DAC_WRITE | chan, value);
}
static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
s32 val;
val = i2c_smbus_write_word_swapped(i2c,
AD5593R_MODE_CONF | AD5592R_REG_ADC_SEQ, BIT(chan));
if (val < 0)
return (int) val;
return ad5593r_read_word(i2c, AD5593R_MODE_ADC_READBACK, value);
}
static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
return i2c_smbus_write_word_swapped(i2c,
AD5593R_MODE_CONF | reg, value);
}
static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
return ad5593r_read_word(i2c, AD5593R_MODE_REG_READBACK | reg, value);
}
static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
u16 val;
int ret;
ret = ad5593r_read_word(i2c, AD5593R_MODE_GPIO_READBACK, &val);
if (ret)
return ret;
*value = (u8) val;
return 0;
}
static const struct ad5592r_rw_ops ad5593r_rw_ops = {
.write_dac = ad5593r_write_dac,
.read_adc = ad5593r_read_adc,
.reg_write = ad5593r_reg_write,
.reg_read = ad5593r_reg_read,
.gpio_read = ad5593r_gpio_read,
};
static int ad5593r_i2c_probe(struct i2c_client *i2c)
{
const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
if (!i2c_check_functionality(i2c->adapter,
I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
return -EOPNOTSUPP;
return ad5592r_probe(&i2c->dev, id->name, &ad5593r_rw_ops);
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void ad5593r_i2c_remove(struct i2c_client *i2c)
{
ad5592r_remove(&i2c->dev);
}
static const struct i2c_device_id ad5593r_i2c_ids[] = {
{ .name = "ad5593r", },
{},
};
MODULE_DEVICE_TABLE(i2c, ad5593r_i2c_ids);
static const struct of_device_id ad5593r_of_match[] = {
{ .compatible = "adi,ad5593r", },
{},
};
MODULE_DEVICE_TABLE(of, ad5593r_of_match);
static const struct acpi_device_id ad5593r_acpi_match[] = {
{"ADS5593", },
{ },
};
MODULE_DEVICE_TABLE(acpi, ad5593r_acpi_match);
static struct i2c_driver ad5593r_driver = {
.driver = {
.name = "ad5593r",
.of_match_table = ad5593r_of_match,
.acpi_match_table = ad5593r_acpi_match,
},
.probe = ad5593r_i2c_probe,
.remove = ad5593r_i2c_remove,
.id_table = ad5593r_i2c_ids,
};
module_i2c_driver(ad5593r_driver);
MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD5593R multi-channel converters");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(IIO_AD5592R);