linux/scripts/selinux/install_policy.sh

86 lines
2.3 KiB
Bash
Raw Normal View History

selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
#!/bin/sh
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
set -e
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
if [ `id -u` -ne 0 ]; then
echo "$0: must be root to install the selinux policy"
exit 1
fi
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
SF=`which setfiles`
if [ $? -eq 1 ]; then
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
echo "Could not find setfiles"
echo "Do you have policycoreutils installed?"
exit 1
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
fi
CP=`which checkpolicy`
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
if [ $? -eq 1 ]; then
echo "Could not find checkpolicy"
echo "Do you have checkpolicy installed?"
exit 1
fi
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
VERS=`$CP -V | awk '{print $1}'`
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
ENABLED=`which selinuxenabled`
if [ $? -eq 1 ]; then
echo "Could not find selinuxenabled"
echo "Do you have libselinux-utils installed?"
exit 1
fi
if selinuxenabled; then
echo "SELinux is already enabled"
echo "This prevents safely relabeling all files."
echo "Boot with selinux=0 on the kernel command-line or"
echo "SELINUX=disabled in /etc/selinux/config."
exit 1
fi
cd mdp
./mdp -m policy.conf file_contexts
$CP -U allow -M -o policy.$VERS policy.conf
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
mkdir -p /etc/selinux/dummy/policy
mkdir -p /etc/selinux/dummy/contexts/files
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
echo "__default__:user_u:s0" > /etc/selinux/dummy/seusers
echo "base_r:base_t:s0" > /etc/selinux/dummy/contexts/failsafe_context
echo "base_r:base_t:s0 base_r:base_t:s0" > /etc/selinux/dummy/default_contexts
cat > /etc/selinux/dummy/contexts/x_contexts <<EOF
client * user_u:base_r:base_t:s0
property * user_u:object_r:base_t:s0
extension * user_u:object_r:base_t:s0
selection * user_u:object_r:base_t:s0
event * user_u:object_r:base_t:s0
EOF
touch /etc/selinux/dummy/contexts/virtual_domain_context
touch /etc/selinux/dummy/contexts/virtual_image_context
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
cp file_contexts /etc/selinux/dummy/contexts/files
cp dbus_contexts /etc/selinux/dummy/contexts
cp policy.$VERS /etc/selinux/dummy/policy
FC_FILE=/etc/selinux/dummy/contexts/files/file_contexts
if [ ! -d /etc/selinux ]; then
mkdir -p /etc/selinux
fi
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
if [ -f /etc/selinux/config ]; then
echo "/etc/selinux/config exists, moving to /etc/selinux/config.bak."
mv /etc/selinux/config /etc/selinux/config.bak
fi
echo "Creating new /etc/selinux/config for dummy policy."
cat > /etc/selinux/config << EOF
SELINUX=permissive
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
SELINUXTYPE=dummy
EOF
cd /etc/selinux/dummy/contexts/files
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
$SF -F file_contexts /
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
mounts=`cat /proc/$$/mounts | \
egrep "ext[234]|jfs|xfs|reiserfs|jffs2|gfs2|btrfs|f2fs|ocfs2" | \
awk '{ print $2 '}`
$SF -F file_contexts $mounts
selinux: add support for installing a dummy policy (v2) In August 2006 I posted a patch generating a minimal SELinux policy. This week, David P. Quigley posted an updated version of that as a patch against the kernel. It also had nice logic for auto-installing the policy. Following is David's original patch intro (preserved especially bc it has stats on the generated policies): se interested in the changes there were only two significant changes. The first is that the iteration through the list of classes used NULL as a sentinel value. The problem with this is that the class_to_string array actually has NULL entries in its table as place holders for the user space object classes. The second change was that it would seem at some point the initial sids table was NULL terminated. This is no longer the case so that iteration has to be done on array length instead of looking for NULL. Some statistics on the policy that it generates: The policy consists of 523 lines which contain no blank lines. Of those 523 lines 453 of them are class, permission, and initial sid definitions. These lines are usually little to no concern to the policy developer since they will not be adding object classes or permissions. Of the remaining 70 lines there is one type, one role, and one user statement. The remaining lines are broken into three portions. The first group are TE allow rules which make up 29 of the remaining lines, the second is assignment of labels to the initial sids which consist of 27 lines, and file system labeling statements which are the remaining 11. In addition to the policy.conf generated there is a single file_contexts file containing two lines which labels the entire system with base_t. This policy generates a policy.23 binary that is 7920 bytes. (then a few versions later...): The new policy is 587 lines (stripped of blank lines) with 476 of those lines being the boilerplate that I mentioned last time. The remaining 111 lines have the 3 lines for type, user, and role, 70 lines for the allow rules (one for each object class including user space object classes), 27 lines to assign types to the initial sids, and 11 lines for file system labeling. The policy binary is 9194 bytes. Changelog: Aug 26: Added Documentation/SELinux.txt Aug 26: Incorporated a set of comments by Stephen Smalley: 1. auto-setup SELINUXTYPE=dummy 2. don't auto-install if selinux is enabled with non-dummy policy 3. don't re-compute policy version 4. /sbin/setfiles not /usr/sbin/setfiles Aug 22: As per JMorris comments, made sure make distclean cleans up the mdp directory. Removed a check for file_contexts which is now created in the same file as the check, making it superfluous. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-27 03:47:57 +08:00
scripts/selinux: modernize mdp Derived in part from a patch by Dominick Grift. The MDP example no longer works on modern systems. Fix it. While we are at it, add MLS support and enable it. NB This still does not work on systems using dbus-daemon instead of dbus-broker because dbus-daemon does not yet gracefully handle unknown classes/permissions. This appears to be a deficiency in libselinux's selinux_set_mapping() interface and underlying implementation, which was never fully updated to deal with unknown classes/permissions unlike the kernel. The same problem also occurs with XSELinux. Programs that instead use selinux_check_access() like dbus-broker should not have this problem. Changes to mdp: Add support for devtmpfs, required by modern Linux distributions. Add MLS support, with sample sensitivities, categories, and constraints. Generate fs_use and genfscon rules based on kernel configuration. Update list of filesystem types for fs_use and genfscon rules. Use object_r for object contexts. Changes to install_policy.sh: Bail immediately on any errors. Provide more helpful error messages when unable to find userspace tools. Refuse to run if SELinux is already enabled. Unconditionally move aside /etc/selinux/config and create a new one. Build policy with -U allow so that userspace object managers do not break. Build policy with MLS enabled by default. Create seusers, failsafe_context, and default_contexts for use by pam_selinux / libselinux. Create x_contexts for the SELinux X extension. Create virtual_domain_context and virtual_image_context for libvirtd. Set to permissive mode rather than enforcing to permit initial autorelabel. Update the list of filesystem types to be relabeled. Write -F to /.autorelabel to cause a forced autorelabel on reboot. Drop broken attempt to relabel the /dev mountpoint directory. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Dominick Grift <dominick.grift@defensec.nl> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-22 05:31:47 +08:00
echo "-F" > /.autorelabel