linux/drivers/usb/dwc2/Makefile

ccflags-$(CONFIG_USB_DWC2_DEBUG)	+= -DDEBUG
ccflags-$(CONFIG_USB_DWC2_VERBOSE)	+= -DVERBOSE_DEBUG

obj-$(CONFIG_USB_DWC2)			+= dwc2.o
dwc2-y					:= core.o core_intr.o

ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
	dwc2-y				+= hcd.o hcd_intr.o
	dwc2-y				+= hcd_queue.o hcd_ddma.o
endif

ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
	dwc2-y       			+= gadget.o
endif

# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
# this location and renamed gadget.c. When building for dynamically linked
# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role
# mode. The PCI bus interface module will called dwc2_pci.ko and the platform
# interface module will be called dwc2_platform.ko.

obj-$(CONFIG_USB_DWC2_PCI)		+= dwc2_pci.o
dwc2_pci-y				:= pci.o

obj-$(CONFIG_USB_DWC2_PLATFORM)		+= dwc2_platform.o
dwc2_platform-y				:= platform.o
staging: Hook the DWC2 driver into the build system Add the DWC2 Kconfig and Makefile, and modify the staging Kconfig and Makefile to include them Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 08:48:02 +08:00			`ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG`
			`ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG`

usb: dwc2: Update Kconfig to support dual-role Update DWC2 kconfig and makefile to support dual-role mode. The platform file will always get compiled for the case where the controller is directly connected to the CPU. So for loadable modules, dwc2.ko is built for host, peripheral, and dual-role mode. The PCI bus interface will be called dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2014-11-12 01:13:40 +08:00			`obj-$(CONFIG_USB_DWC2) += dwc2.o`
usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory Moves the s3c-hsotg driver into the dwc2 directory and uses the dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c. NOTE: You can build both host and peripheral as a dynamically linked module, but be aware that if you insmod dwc2_gadget, then rmmod it, then insmod dwc2 and dwc2_platform for host mode, this will not work. As the step to rmmod dwc2_gadget.ko will turn off the clock to the USB IP. The dwc2 host driver currently does not look to turn on a clock yet. A patch to fix that will be coming soon. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Robert Baldyga <r.baldyga@samsung.com> [ pz: Folded Kconfig/Makefile changes, which were originally in a separate patch, into this one, to avoid a build breakage. Modified Kconfig/Makefile changes a bit. Tested host part only. ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-04-15 05:13:34 +08:00			`dwc2-y := core.o core_intr.o`
usb: dwc2: Update Kconfig to support dual-role Update DWC2 kconfig and makefile to support dual-role mode. The platform file will always get compiled for the case where the controller is directly connected to the CPU. So for loadable modules, dwc2.ko is built for host, peripheral, and dual-role mode. The PCI bus interface will be called dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2014-11-12 01:13:40 +08:00
			`ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)`
			`dwc2-y += hcd.o hcd_intr.o`
			`dwc2-y += hcd_queue.o hcd_ddma.o`
			`endif`

			`ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)`
			`dwc2-y += gadget.o`
			`endif`
staging: Hook the DWC2 driver into the build system Add the DWC2 Kconfig and Makefile, and modify the staging Kconfig and Makefile to include them Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 08:48:02 +08:00
usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory Moves the s3c-hsotg driver into the dwc2 directory and uses the dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c. NOTE: You can build both host and peripheral as a dynamically linked module, but be aware that if you insmod dwc2_gadget, then rmmod it, then insmod dwc2 and dwc2_platform for host mode, this will not work. As the step to rmmod dwc2_gadget.ko will turn off the clock to the USB IP. The dwc2 host driver currently does not look to turn on a clock yet. A patch to fix that will be coming soon. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Robert Baldyga <r.baldyga@samsung.com> [ pz: Folded Kconfig/Makefile changes, which were originally in a separate patch, into this one, to avoid a build breakage. Modified Kconfig/Makefile changes a bit. Tested host part only. ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-04-15 05:13:34 +08:00			`# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to`
			`# this location and renamed gadget.c. When building for dynamically linked`
usb: dwc2: Update Kconfig to support dual-role Update DWC2 kconfig and makefile to support dual-role mode. The platform file will always get compiled for the case where the controller is directly connected to the CPU. So for loadable modules, dwc2.ko is built for host, peripheral, and dual-role mode. The PCI bus interface will be called dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2014-11-12 01:13:40 +08:00			`# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role`
			`# mode. The PCI bus interface module will called dwc2_pci.ko and the platform`
			`# interface module will be called dwc2_platform.ko.`
usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory Moves the s3c-hsotg driver into the dwc2 directory and uses the dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c. NOTE: You can build both host and peripheral as a dynamically linked module, but be aware that if you insmod dwc2_gadget, then rmmod it, then insmod dwc2 and dwc2_platform for host mode, this will not work. As the step to rmmod dwc2_gadget.ko will turn off the clock to the USB IP. The dwc2 host driver currently does not look to turn on a clock yet. A patch to fix that will be coming soon. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Robert Baldyga <r.baldyga@samsung.com> [ pz: Folded Kconfig/Makefile changes, which were originally in a separate patch, into this one, to avoid a build breakage. Modified Kconfig/Makefile changes a bit. Tested host part only. ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-04-15 05:13:34 +08:00
usb: dwc2: pci: Correctly compile dwc2-pci as a module or built-in The dwc2-pci driver should be compiled as a module when configured to do so. If the dwc2-pci is configured as a module but actually built-in, it can cause build errors due to the fact that the generic-phy will be allowed to compile as a module causing undefined references. Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2015-03-17 09:10:02 +08:00			`obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o`
			`dwc2_pci-y := pci.o`
usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory Moves the s3c-hsotg driver into the dwc2 directory and uses the dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c. NOTE: You can build both host and peripheral as a dynamically linked module, but be aware that if you insmod dwc2_gadget, then rmmod it, then insmod dwc2 and dwc2_platform for host mode, this will not work. As the step to rmmod dwc2_gadget.ko will turn off the clock to the USB IP. The dwc2 host driver currently does not look to turn on a clock yet. A patch to fix that will be coming soon. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Robert Baldyga <r.baldyga@samsung.com> [ pz: Folded Kconfig/Makefile changes, which were originally in a separate patch, into this one, to avoid a build breakage. Modified Kconfig/Makefile changes a bit. Tested host part only. ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-04-15 05:13:34 +08:00
usb: dwc2: Update Kconfig to support dual-role Update DWC2 kconfig and makefile to support dual-role mode. The platform file will always get compiled for the case where the controller is directly connected to the CPU. So for loadable modules, dwc2.ko is built for host, peripheral, and dual-role mode. The PCI bus interface will be called dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2014-11-12 01:13:40 +08:00			`obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o`
			`dwc2_platform-y := platform.o`