linux/kernel/irq/chip.c

856 lines
21 KiB
C
Raw Normal View History

/*
* linux/kernel/irq/chip.c
*
* Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
* Copyright (C) 2005-2006, Thomas Gleixner, Russell King
*
* This file contains the core interrupt handling code, for irq-chip
* based architectures.
*
* Detailed information is available in Documentation/DocBook/genericirq
*/
#include <linux/irq.h>
#include <linux/msi.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include "internals.h"
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
static void dynamic_irq_init_x(unsigned int irq, bool keep_chip_data)
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
{
struct irq_desc *desc;
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
unsigned long flags;
desc = irq_to_desc(irq);
if (!desc) {
WARN(1, KERN_ERR "Trying to initialize invalid IRQ%d\n", irq);
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
return;
}
/* Ensure we don't have left over values from a previous use of this irq */
raw_spin_lock_irqsave(&desc->lock, flags);
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
desc->status = IRQ_DISABLED;
desc->irq_data.chip = &no_irq_chip;
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
desc->handle_irq = handle_bad_irq;
desc->depth = 1;
desc->irq_data.msi_desc = NULL;
desc->irq_data.handler_data = NULL;
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
if (!keep_chip_data)
desc->irq_data.chip_data = NULL;
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
desc->action = NULL;
desc->irq_count = 0;
desc->irqs_unhandled = 0;
#ifdef CONFIG_SMP
cpumask_setall(desc->irq_data.affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
cpumask_clear(desc->pending_mask);
#endif
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
#endif
raw_spin_unlock_irqrestore(&desc->lock, flags);
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
}
/**
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
* dynamic_irq_init - initialize a dynamically allocated irq
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
* @irq: irq number to initialize
*/
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
void dynamic_irq_init(unsigned int irq)
{
dynamic_irq_init_x(irq, false);
}
/**
* dynamic_irq_init_keep_chip_data - initialize a dynamically allocated irq
* @irq: irq number to initialize
*
* does not set irq_to_desc(irq)->irq_data.chip_data to NULL
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
*/
void dynamic_irq_init_keep_chip_data(unsigned int irq)
{
dynamic_irq_init_x(irq, true);
}
static void dynamic_irq_cleanup_x(unsigned int irq, bool keep_chip_data)
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
{
struct irq_desc *desc = irq_to_desc(irq);
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
unsigned long flags;
if (!desc) {
WARN(1, KERN_ERR "Trying to cleanup invalid IRQ%d\n", irq);
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
return;
}
raw_spin_lock_irqsave(&desc->lock, flags);
if (desc->action) {
raw_spin_unlock_irqrestore(&desc->lock, flags);
WARN(1, KERN_ERR "Destroying IRQ%d without calling free_irq\n",
irq);
return;
}
desc->irq_data.msi_desc = NULL;
desc->irq_data.handler_data = NULL;
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
if (!keep_chip_data)
desc->irq_data.chip_data = NULL;
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
desc->handle_irq = handle_bad_irq;
desc->irq_data.chip = &no_irq_chip;
desc->name = NULL;
clear_kstat_irqs(desc);
raw_spin_unlock_irqrestore(&desc->lock, flags);
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
}
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
/**
* dynamic_irq_cleanup - cleanup a dynamically allocated irq
* @irq: irq number to initialize
*/
void dynamic_irq_cleanup(unsigned int irq)
{
dynamic_irq_cleanup_x(irq, false);
}
/**
* dynamic_irq_cleanup_keep_chip_data - cleanup a dynamically allocated irq
* @irq: irq number to initialize
*
* does not set irq_to_desc(irq)->irq_data.chip_data to NULL
x86: Avoid race condition in pci_enable_msix() Keep chip_data in create_irq_nr and destroy_irq. When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt: [ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function. ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init(). igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this: cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue; This hits the NULL deref. Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs(): destroy_irq() dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window... desc->chip_data = cfg; Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg. Reported-and-analyzed-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-3-git-send-email-yinghai@kernel.org> Signed-off-by: Brandon Phililps <bphilips@suse.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10 17:20:06 +08:00
*/
void dynamic_irq_cleanup_keep_chip_data(unsigned int irq)
{
dynamic_irq_cleanup_x(irq, true);
}
[PATCH] genirq: irq: add a dynamic irq creation API With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:16:37 +08:00
/**
* set_irq_chip - set the irq chip for an irq
* @irq: irq number
* @chip: pointer to irq chip description structure
*/
int set_irq_chip(unsigned int irq, struct irq_chip *chip)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
WARN(1, KERN_ERR "Trying to install chip for IRQ%d\n", irq);
return -EINVAL;
}
if (!chip)
chip = &no_irq_chip;
raw_spin_lock_irqsave(&desc->lock, flags);
irq_chip_set_defaults(chip);
desc->irq_data.chip = chip;
raw_spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
EXPORT_SYMBOL(set_irq_chip);
/**
* set_irq_type - set the irq trigger type for an irq
* @irq: irq number
* @type: IRQ_TYPE_{LEVEL,EDGE}_* value - see include/linux/irq.h
*/
int set_irq_type(unsigned int irq, unsigned int type)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
int ret = -ENXIO;
if (!desc) {
printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
return -ENODEV;
}
type &= IRQ_TYPE_SENSE_MASK;
if (type == IRQ_TYPE_NONE)
return 0;
raw_spin_lock_irqsave(&desc->lock, flags);
ret = __irq_set_trigger(desc, irq, type);
raw_spin_unlock_irqrestore(&desc->lock, flags);
return ret;
}
EXPORT_SYMBOL(set_irq_type);
/**
* set_irq_data - set irq type data for an irq
* @irq: Interrupt number
* @data: Pointer to interrupt specific data
*
* Set the hardware irq controller data for an irq
*/
int set_irq_data(unsigned int irq, void *data)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
printk(KERN_ERR
"Trying to install controller data for IRQ%d\n", irq);
return -EINVAL;
}
raw_spin_lock_irqsave(&desc->lock, flags);
desc->irq_data.handler_data = data;
raw_spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
EXPORT_SYMBOL(set_irq_data);
/**
* set_irq_msi - set MSI descriptor data for an irq
* @irq: Interrupt number
* @entry: Pointer to MSI descriptor data
*
* Set the MSI descriptor entry for an irq
*/
int set_irq_msi(unsigned int irq, struct msi_desc *entry)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
printk(KERN_ERR
"Trying to install msi data for IRQ%d\n", irq);
return -EINVAL;
}
raw_spin_lock_irqsave(&desc->lock, flags);
desc->irq_data.msi_desc = entry;
if (entry)
entry->irq = irq;
raw_spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
/**
* set_irq_chip_data - set irq chip data for an irq
* @irq: Interrupt number
* @data: Pointer to chip specific data
*
* Set the hardware irq chip data for an irq
*/
int set_irq_chip_data(unsigned int irq, void *data)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
printk(KERN_ERR
"Trying to install chip data for IRQ%d\n", irq);
return -EINVAL;
}
if (!desc->irq_data.chip) {
printk(KERN_ERR "BUG: bad set_irq_chip_data(IRQ#%d)\n", irq);
return -EINVAL;
}
raw_spin_lock_irqsave(&desc->lock, flags);
desc->irq_data.chip_data = data;
raw_spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
EXPORT_SYMBOL(set_irq_chip_data);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
/**
* set_irq_nested_thread - Set/Reset the IRQ_NESTED_THREAD flag of an irq
*
* @irq: Interrupt number
* @nest: 0 to clear / 1 to set the IRQ_NESTED_THREAD flag
*
* The IRQ_NESTED_THREAD flag indicates that on
* request_threaded_irq() no separate interrupt thread should be
* created for the irq as the handler are called nested in the
* context of a demultiplexing interrupt handler thread.
*/
void set_irq_nested_thread(unsigned int irq, int nest)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc)
return;
raw_spin_lock_irqsave(&desc->lock, flags);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
if (nest)
desc->status |= IRQ_NESTED_THREAD;
else
desc->status &= ~IRQ_NESTED_THREAD;
raw_spin_unlock_irqrestore(&desc->lock, flags);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
}
EXPORT_SYMBOL_GPL(set_irq_nested_thread);
/*
* default enable function
*/
static void default_enable(struct irq_data *data)
{
struct irq_desc *desc = irq_data_to_desc(data);
desc->irq_data.chip->irq_unmask(&desc->irq_data);
desc->status &= ~IRQ_MASKED;
}
/*
* default disable function
*/
static void default_disable(struct irq_data *data)
{
}
/*
* default startup function
*/
static unsigned int default_startup(struct irq_data *data)
{
struct irq_desc *desc = irq_data_to_desc(data);
desc->irq_data.chip->irq_enable(data);
return 0;
}
/*
* default shutdown function
*/
static void default_shutdown(struct irq_data *data)
{
struct irq_desc *desc = irq_data_to_desc(data);
desc->irq_data.chip->irq_mask(&desc->irq_data);
desc->status |= IRQ_MASKED;
}
/* Temporary migration helpers */
static void compat_irq_mask(struct irq_data *data)
{
data->chip->mask(data->irq);
}
static void compat_irq_unmask(struct irq_data *data)
{
data->chip->unmask(data->irq);
}
static void compat_irq_ack(struct irq_data *data)
{
data->chip->ack(data->irq);
}
static void compat_irq_mask_ack(struct irq_data *data)
{
data->chip->mask_ack(data->irq);
}
static void compat_irq_eoi(struct irq_data *data)
{
data->chip->eoi(data->irq);
}
static void compat_irq_enable(struct irq_data *data)
{
data->chip->enable(data->irq);
}
static void compat_irq_disable(struct irq_data *data)
{
data->chip->disable(data->irq);
}
static void compat_irq_shutdown(struct irq_data *data)
{
data->chip->shutdown(data->irq);
}
static unsigned int compat_irq_startup(struct irq_data *data)
{
return data->chip->startup(data->irq);
}
static int compat_irq_set_affinity(struct irq_data *data,
const struct cpumask *dest, bool force)
{
return data->chip->set_affinity(data->irq, dest);
}
static void compat_bus_lock(struct irq_data *data)
{
data->chip->bus_lock(data->irq);
}
static void compat_bus_sync_unlock(struct irq_data *data)
{
data->chip->bus_sync_unlock(data->irq);
}
/*
* Fixup enable/disable function pointers
*/
void irq_chip_set_defaults(struct irq_chip *chip)
{
/*
* Compat fixup functions need to be before we set the
* defaults for enable/disable/startup/shutdown
*/
if (chip->enable)
chip->irq_enable = compat_irq_enable;
if (chip->disable)
chip->irq_disable = compat_irq_disable;
if (chip->shutdown)
chip->irq_shutdown = compat_irq_shutdown;
if (chip->startup)
chip->irq_startup = compat_irq_startup;
/*
* The real defaults
*/
if (!chip->irq_enable)
chip->irq_enable = default_enable;
if (!chip->irq_disable)
chip->irq_disable = default_disable;
if (!chip->irq_startup)
chip->irq_startup = default_startup;
/*
* We use chip->irq_disable, when the user provided its own. When
* we have default_disable set for chip->irq_disable, then we need
* to use default_shutdown, otherwise the irq line is not
* disabled on free_irq():
*/
if (!chip->irq_shutdown)
chip->irq_shutdown = chip->irq_disable != default_disable ?
chip->irq_disable : default_shutdown;
[PATCH] some irq_chip variables point to NULL I got an oops when booting 2.6.19-rc5-mm1 on my ia64 machine. Below is the log. Oops 11012296146944 [1] Modules linked in: binfmt_misc dm_mirror dm_multipath dm_mod thermal processor f an container button sg eepro100 e100 mii Pid: 0, CPU 0, comm: swapper psr : 0000121008022038 ifs : 800000000000040b ip : [<a0000001000e1411>] Not tainted ip is at __do_IRQ+0x371/0x3e0 unat: 0000000000000000 pfs : 000000000000040b rsc : 0000000000000003 rnat: 656960155aa56aa5 bsps: a00000010058b890 pr : 656960155aa55a65 ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c0270033f csd : 0000000000000000 ssd : 0000000000000000 b0 : a0000001000e1390 b6 : a0000001005beac0 b7 : e00000007f01aa00 f6 : 000000000000000000000 f7 : 0ffe69090000000000000 f8 : 1000a9090000000000000 f9 : 0ffff8000000000000000 f10 : 1000a908ffffff6f70000 f11 : 1003e0000000000000909 r1 : a000000100fbbff0 r2 : 0000000000010002 r3 : 0000000000010001 r8 : fffffffffffbffff r9 : a000000100bd8060 r10 : a000000100dd83b8 r11 : fffffffffffeffff r12 : a000000100bcbbb0 r13 : a000000100bc4000 r14 : 0000000000010000 r15 : 0000000000010000 r16 : a000000100c01aa8 r17 : a000000100d2c350 r18 : 0000000000000000 r19 : a000000100d2c300 r20 : a000000100c01a88 r21 : 0000000080010100 r22 : a000000100c01ac0 r23 : a0000001000108e0 r24 : e000000477980004 r25 : 0000000000000000 r26 : 0000000000000000 r27 : e00000000913400c r28 : e0000004799ee51c r29 : e0000004778b87f0 r30 : a000000100d2c300 r31 : a00000010005c7e0 Call Trace: [<a000000100014600>] show_stack+0x40/0xa0 sp=a000000100bcb760 bsp=a000000100bc4f40 [<a000000100014f00>] show_regs+0x840/0x880 sp=a000000100bcb930 bsp=a000000100bc4ee8 [<a000000100037fb0>] die+0x250/0x320 sp=a000000100bcb930 bsp=a000000100bc4ea0 [<a00000010005e5f0>] ia64_do_page_fault+0x8d0/0xa20 sp=a000000100bcb950 bsp=a000000100bc4e50 [<a00000010000caa0>] ia64_leave_kernel+0x0/0x290 sp=a000000100bcb9e0 bsp=a000000100bc4e50 [<a0000001000e1410>] __do_IRQ+0x370/0x3e0 sp=a000000100bcbbb0 bsp=a000000100bc4df0 [<a000000100011f50>] ia64_handle_irq+0x170/0x220 sp=a000000100bcbbb0 bsp=a000000100bc4dc0 [<a00000010000caa0>] ia64_leave_kernel+0x0/0x290 sp=a000000100bcbbb0 bsp=a000000100bc4dc0 [<a000000100012390>] ia64_pal_call_static+0x90/0xc0 sp=a000000100bcbd80 bsp=a000000100bc4d78 [<a000000100015630>] default_idle+0x90/0x160 sp=a000000100bcbd80 bsp=a000000100bc4d58 [<a000000100014290>] cpu_idle+0x1f0/0x440 sp=a000000100bcbe20 bsp=a000000100bc4d18 [<a000000100009980>] rest_init+0xc0/0xe0 sp=a000000100bcbe20 bsp=a000000100bc4d00 [<a0000001009f8ea0>] start_kernel+0x6a0/0x6c0 sp=a000000100bcbe20 bsp=a000000100bc4ca0 [<a0000001000089f0>] __end_ivt_text+0x6d0/0x6f0 sp=a000000100bcbe30 bsp=a000000100bc4c00 <0>Kernel panic - not syncing: Aiee, killing interrupt handler! The root cause is that some irq_chip variables, especially ia64_msi_chip, initiate their memeber end to point to NULL. __do_IRQ doesn't check if irq_chip->end is null and just calls it after processing the interrupt. As irq_chip->end is called at many places, so I fix it by reinitiating irq_chip->end to dummy_irq_chip.end, e.g., a noop function. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16 17:19:10 +08:00
if (!chip->end)
chip->end = dummy_irq_chip.end;
/*
* Now fix up the remaining compat handlers
*/
if (chip->bus_lock)
chip->irq_bus_lock = compat_bus_lock;
if (chip->bus_sync_unlock)
chip->irq_bus_sync_unlock = compat_bus_sync_unlock;
if (chip->mask)
chip->irq_mask = compat_irq_mask;
if (chip->unmask)
chip->irq_unmask = compat_irq_unmask;
if (chip->ack)
chip->irq_ack = compat_irq_ack;
if (chip->mask_ack)
chip->irq_mask_ack = compat_irq_mask_ack;
if (chip->eoi)
chip->irq_eoi = compat_irq_eoi;
if (chip->set_affinity)
chip->irq_set_affinity = compat_irq_set_affinity;
}
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack)
desc->irq_data.chip->irq_mask_ack(&desc->irq_data);
else {
desc->irq_data.chip->irq_mask(&desc->irq_data);
if (desc->irq_data.chip->irq_ack)
desc->irq_data.chip->irq_ack(&desc->irq_data);
}
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
desc->status |= IRQ_MASKED;
}
static inline void mask_irq(struct irq_desc *desc)
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
{
if (desc->irq_data.chip->irq_mask) {
desc->irq_data.chip->irq_mask(&desc->irq_data);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
desc->status |= IRQ_MASKED;
}
}
static inline void unmask_irq(struct irq_desc *desc)
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
{
if (desc->irq_data.chip->irq_unmask) {
desc->irq_data.chip->irq_unmask(&desc->irq_data);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
desc->status &= ~IRQ_MASKED;
}
}
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
/*
* handle_nested_irq - Handle a nested irq from a irq thread
* @irq: the interrupt number
*
* Handle interrupts which are nested into a threaded interrupt
* handler. The handler function is called inside the calling
* threads context.
*/
void handle_nested_irq(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action;
irqreturn_t action_ret;
might_sleep();
raw_spin_lock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
kstat_incr_irqs_this_cpu(irq, desc);
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
goto out_unlock;
desc->status |= IRQ_INPROGRESS;
raw_spin_unlock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
action_ret = action->thread_fn(action->irq, action->dev_id);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
raw_spin_lock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
desc->status &= ~IRQ_INPROGRESS;
out_unlock:
raw_spin_unlock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
}
EXPORT_SYMBOL_GPL(handle_nested_irq);
/**
* handle_simple_irq - Simple and software-decoded IRQs.
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Simple interrupts are either sent from a demultiplexing interrupt
* handler or come from hardware, where no interrupt hardware control
* is necessary.
*
* Note: The caller is expected to handle the ack, clear, mask and
* unmask issues if necessary.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_simple_irq(unsigned int irq, struct irq_desc *desc)
{
struct irqaction *action;
irqreturn_t action_ret;
raw_spin_lock(&desc->lock);
if (unlikely(desc->status & IRQ_INPROGRESS))
goto out_unlock;
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
goto out_unlock;
desc->status |= IRQ_INPROGRESS;
raw_spin_unlock(&desc->lock);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
action_ret = handle_IRQ_event(irq, action);
if (!noirqdebug)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
note_interrupt(irq, desc, action_ret);
raw_spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
out_unlock:
raw_spin_unlock(&desc->lock);
}
/**
* handle_level_irq - Level type irq handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Level type interrupts are active as long as the hardware line has
* the active level. This may require to mask the interrupt and unmask
* it after the associated handler has acknowledged the device, so the
* interrupt line is back to inactive.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_level_irq(unsigned int irq, struct irq_desc *desc)
{
struct irqaction *action;
irqreturn_t action_ret;
raw_spin_lock(&desc->lock);
mask_ack_irq(desc);
if (unlikely(desc->status & IRQ_INPROGRESS))
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 17:14:34 +08:00
goto out_unlock;
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
/*
* If its disabled or no action available
* keep it masked and get out of here
*/
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED)))
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 17:14:34 +08:00
goto out_unlock;
desc->status |= IRQ_INPROGRESS;
raw_spin_unlock(&desc->lock);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
action_ret = handle_IRQ_event(irq, action);
if (!noirqdebug)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
note_interrupt(irq, desc, action_ret);
raw_spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
genirq: Add oneshot support For threaded interrupt handlers we expect the hard interrupt handler part to mask the interrupt on the originating device. The interrupt line itself is reenabled after the hard interrupt handler has executed. This requires access to the originating device from hard interrupt context which is not always possible. There are devices which can only be accessed via a bus (i2c, spi, ...). The bus access requires thread context. For such devices we need to keep the interrupt line masked until the threaded handler has executed. Add a new flag IRQF_ONESHOT which allows drivers to request that the interrupt is not unmasked after the hard interrupt context handler has been executed and the thread has been woken. The interrupt line is unmasked after the thread handler function has been executed. Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms. For oneshot interrupts the primary handler simply returns IRQ_WAKE_THREAD and does nothing else. A generic implementation irq_default_primary_handler() is provided to avoid useless copies all over the place. It is automatically installed when request_threaded_irq() is called with handler=NULL and thread_fn!=NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:22 +08:00
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
if (!(desc->status & (IRQ_DISABLED | IRQ_ONESHOT)))
unmask_irq(desc);
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 17:14:34 +08:00
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_level_irq);
/**
* handle_fasteoi_irq - irq handler for transparent controllers
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Only a single callback will be issued to the chip: an ->eoi()
* call when the interrupt has been serviced. This enables support
* for modern forms of interrupt handlers, which handle the flow
* details in hardware, transparently.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
{
struct irqaction *action;
irqreturn_t action_ret;
raw_spin_lock(&desc->lock);
if (unlikely(desc->status & IRQ_INPROGRESS))
goto out;
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
/*
* If its disabled or no action available
* then mask it and get out of here:
*/
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
desc->status |= IRQ_PENDING;
mask_irq(desc);
goto out;
}
desc->status |= IRQ_INPROGRESS;
desc->status &= ~IRQ_PENDING;
raw_spin_unlock(&desc->lock);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
action_ret = handle_IRQ_event(irq, action);
if (!noirqdebug)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
note_interrupt(irq, desc, action_ret);
raw_spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
out:
desc->irq_data.chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
/**
* handle_edge_irq - edge type IRQ handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Interrupt occures on the falling and/or rising edge of a hardware
* signal. The occurence is latched into the irq controller hardware
* and must be acked in order to be reenabled. After the ack another
* interrupt can happen on the same source even before the first one
* is handled by the associated event handler. If this happens it
* might be necessary to disable (mask) the interrupt depending on the
* controller hardware. This requires to reenable the interrupt inside
* of the loop which handles the interrupts which have arrived while
* the handler was running. If all pending interrupts are handled, the
* loop is left.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_edge_irq(unsigned int irq, struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
/*
* If we're currently running this IRQ, or its disabled,
* we shouldn't process the IRQ. Mark it pending, handle
* the necessary masking and go out
*/
if (unlikely((desc->status & (IRQ_INPROGRESS | IRQ_DISABLED)) ||
!desc->action)) {
desc->status |= (IRQ_PENDING | IRQ_MASKED);
mask_ack_irq(desc);
goto out_unlock;
}
kstat_incr_irqs_this_cpu(irq, desc);
/* Start handling the irq */
desc->irq_data.chip->irq_ack(&desc->irq_data);
/* Mark the IRQ currently in progress.*/
desc->status |= IRQ_INPROGRESS;
do {
struct irqaction *action = desc->action;
irqreturn_t action_ret;
if (unlikely(!action)) {
mask_irq(desc);
goto out_unlock;
}
/*
* When another irq arrived while we were handling
* one, we could have masked the irq.
* Renable it, if it was not disabled in meantime.
*/
if (unlikely((desc->status &
(IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
(IRQ_PENDING | IRQ_MASKED))) {
unmask_irq(desc);
}
desc->status &= ~IRQ_PENDING;
raw_spin_unlock(&desc->lock);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
action_ret = handle_IRQ_event(irq, action);
if (!noirqdebug)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
note_interrupt(irq, desc, action_ret);
raw_spin_lock(&desc->lock);
} while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
desc->status &= ~IRQ_INPROGRESS;
out_unlock:
raw_spin_unlock(&desc->lock);
}
/**
* handle_percpu_irq - Per CPU local irq handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
{
irqreturn_t action_ret;
kstat_incr_irqs_this_cpu(irq, desc);
if (desc->irq_data.chip->irq_ack)
desc->irq_data.chip->irq_ack(&desc->irq_data);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
action_ret = handle_IRQ_event(irq, desc->action);
if (!noirqdebug)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
note_interrupt(irq, desc, action_ret);
if (desc->irq_data.chip->irq_eoi)
desc->irq_data.chip->irq_eoi(&desc->irq_data);
}
void
__set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
printk(KERN_ERR
"Trying to install type control for IRQ%d\n", irq);
return;
}
if (!handle)
handle = handle_bad_irq;
else if (desc->irq_data.chip == &no_irq_chip) {
printk(KERN_WARNING "Trying to install %sinterrupt handler "
"for IRQ%d\n", is_chained ? "chained " : "", irq);
/*
* Some ARM implementations install a handler for really dumb
* interrupt hardware without setting an irq_chip. This worked
* with the ARM no_irq_chip but the check in setup_irq would
* prevent us to setup the interrupt at all. Switch it to
* dummy_irq_chip for easy transition.
*/
desc->irq_data.chip = &dummy_irq_chip;
}
chip_bus_lock(desc);
raw_spin_lock_irqsave(&desc->lock, flags);
/* Uninstall? */
if (handle == handle_bad_irq) {
if (desc->irq_data.chip != &no_irq_chip)
mask_ack_irq(desc);
desc->status |= IRQ_DISABLED;
desc->depth = 1;
}
desc->handle_irq = handle;
desc->name = name;
if (handle != handle_bad_irq && is_chained) {
desc->status &= ~IRQ_DISABLED;
desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE;
desc->depth = 0;
desc->irq_data.chip->irq_startup(&desc->irq_data);
}
raw_spin_unlock_irqrestore(&desc->lock, flags);
chip_bus_sync_unlock(desc);
}
EXPORT_SYMBOL_GPL(__set_irq_handler);
void
set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handle)
{
set_irq_chip(irq, chip);
__set_irq_handler(irq, handle, 0, NULL);
}
void
set_irq_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handle, const char *name)
{
set_irq_chip(irq, chip);
__set_irq_handler(irq, handle, 0, name);
}
void set_irq_noprobe(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
printk(KERN_ERR "Trying to mark IRQ%d non-probeable\n", irq);
return;
}
raw_spin_lock_irqsave(&desc->lock, flags);
desc->status |= IRQ_NOPROBE;
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
void set_irq_probe(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
if (!desc) {
printk(KERN_ERR "Trying to mark IRQ%d probeable\n", irq);
return;
}
raw_spin_lock_irqsave(&desc->lock, flags);
desc->status &= ~IRQ_NOPROBE;
raw_spin_unlock_irqrestore(&desc->lock, flags);
}