2018-07-11 18:20:41 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
// Copyright (C) 2018 Spreadtrum Communications Inc.
|
|
|
|
|
|
|
|
#include <linux/hwspinlock.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/nvmem-provider.h>
|
|
|
|
|
|
|
|
/* PMIC global registers definition */
|
|
|
|
#define SC27XX_MODULE_EN 0xc08
|
|
|
|
#define SC27XX_EFUSE_EN BIT(6)
|
|
|
|
|
|
|
|
/* Efuse controller registers definition */
|
|
|
|
#define SC27XX_EFUSE_GLB_CTRL 0x0
|
|
|
|
#define SC27XX_EFUSE_DATA_RD 0x4
|
|
|
|
#define SC27XX_EFUSE_DATA_WR 0x8
|
|
|
|
#define SC27XX_EFUSE_BLOCK_INDEX 0xc
|
|
|
|
#define SC27XX_EFUSE_MODE_CTRL 0x10
|
|
|
|
#define SC27XX_EFUSE_STATUS 0x14
|
|
|
|
#define SC27XX_EFUSE_WR_TIMING_CTRL 0x20
|
|
|
|
#define SC27XX_EFUSE_RD_TIMING_CTRL 0x24
|
|
|
|
#define SC27XX_EFUSE_EFUSE_DEB_CTRL 0x28
|
|
|
|
|
|
|
|
/* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */
|
|
|
|
#define SC27XX_EFUSE_BLOCK_MASK GENMASK(4, 0)
|
|
|
|
|
|
|
|
/* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */
|
|
|
|
#define SC27XX_EFUSE_PG_START BIT(0)
|
|
|
|
#define SC27XX_EFUSE_RD_START BIT(1)
|
|
|
|
#define SC27XX_EFUSE_CLR_RDDONE BIT(2)
|
|
|
|
|
|
|
|
/* Bits definitions for SC27XX_EFUSE_STATUS register */
|
|
|
|
#define SC27XX_EFUSE_PGM_BUSY BIT(0)
|
|
|
|
#define SC27XX_EFUSE_READ_BUSY BIT(1)
|
|
|
|
#define SC27XX_EFUSE_STANDBY BIT(2)
|
|
|
|
#define SC27XX_EFUSE_GLOBAL_PROT BIT(3)
|
|
|
|
#define SC27XX_EFUSE_RD_DONE BIT(4)
|
|
|
|
|
|
|
|
/* Block number and block width (bytes) definitions */
|
|
|
|
#define SC27XX_EFUSE_BLOCK_MAX 32
|
|
|
|
#define SC27XX_EFUSE_BLOCK_WIDTH 2
|
|
|
|
|
|
|
|
/* Timeout (ms) for the trylock of hardware spinlocks */
|
|
|
|
#define SC27XX_EFUSE_HWLOCK_TIMEOUT 5000
|
|
|
|
|
|
|
|
/* Timeout (us) of polling the status */
|
|
|
|
#define SC27XX_EFUSE_POLL_TIMEOUT 3000000
|
|
|
|
#define SC27XX_EFUSE_POLL_DELAY_US 10000
|
|
|
|
|
|
|
|
struct sc27xx_efuse {
|
|
|
|
struct device *dev;
|
|
|
|
struct regmap *regmap;
|
|
|
|
struct hwspinlock *hwlock;
|
|
|
|
struct mutex mutex;
|
|
|
|
u32 base;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* On Spreadtrum platform, we have multi-subsystems will access the unique
|
|
|
|
* efuse controller, so we need one hardware spinlock to synchronize between
|
|
|
|
* the multiple subsystems.
|
|
|
|
*/
|
|
|
|
static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&efuse->mutex);
|
|
|
|
|
|
|
|
ret = hwspin_lock_timeout_raw(efuse->hwlock,
|
|
|
|
SC27XX_EFUSE_HWLOCK_TIMEOUT);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(efuse->dev, "timeout to get the hwspinlock\n");
|
|
|
|
mutex_unlock(&efuse->mutex);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse)
|
|
|
|
{
|
|
|
|
hwspin_unlock_raw(efuse->hwlock);
|
|
|
|
mutex_unlock(&efuse->mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
ret = regmap_read_poll_timeout(efuse->regmap,
|
|
|
|
efuse->base + SC27XX_EFUSE_STATUS,
|
|
|
|
val, (val & bits),
|
|
|
|
SC27XX_EFUSE_POLL_DELAY_US,
|
|
|
|
SC27XX_EFUSE_POLL_TIMEOUT);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(efuse->dev, "timeout to update the efuse status\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
|
|
|
|
{
|
|
|
|
struct sc27xx_efuse *efuse = context;
|
2019-01-28 23:54:54 +08:00
|
|
|
u32 buf, blk_index = offset / SC27XX_EFUSE_BLOCK_WIDTH;
|
|
|
|
u32 blk_offset = (offset % SC27XX_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
|
2018-07-11 18:20:41 +08:00
|
|
|
int ret;
|
|
|
|
|
2019-01-28 23:54:54 +08:00
|
|
|
if (blk_index > SC27XX_EFUSE_BLOCK_MAX ||
|
|
|
|
bytes > SC27XX_EFUSE_BLOCK_WIDTH)
|
2018-07-11 18:20:41 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ret = sc27xx_efuse_lock(efuse);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* Enable the efuse controller. */
|
|
|
|
ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
|
|
|
|
SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
|
|
|
|
if (ret)
|
|
|
|
goto unlock_efuse;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Before reading, we should ensure the efuse controller is in
|
|
|
|
* standby state.
|
|
|
|
*/
|
|
|
|
ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY);
|
|
|
|
if (ret)
|
|
|
|
goto disable_efuse;
|
|
|
|
|
|
|
|
/* Set the block address to be read. */
|
|
|
|
ret = regmap_write(efuse->regmap,
|
|
|
|
efuse->base + SC27XX_EFUSE_BLOCK_INDEX,
|
2019-01-28 23:54:54 +08:00
|
|
|
blk_index & SC27XX_EFUSE_BLOCK_MASK);
|
2018-07-11 18:20:41 +08:00
|
|
|
if (ret)
|
|
|
|
goto disable_efuse;
|
|
|
|
|
|
|
|
/* Start reading process from efuse memory. */
|
|
|
|
ret = regmap_update_bits(efuse->regmap,
|
|
|
|
efuse->base + SC27XX_EFUSE_MODE_CTRL,
|
|
|
|
SC27XX_EFUSE_RD_START,
|
|
|
|
SC27XX_EFUSE_RD_START);
|
|
|
|
if (ret)
|
|
|
|
goto disable_efuse;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Polling the read done status to make sure the reading process
|
|
|
|
* is completed, that means the data can be read out now.
|
|
|
|
*/
|
|
|
|
ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE);
|
|
|
|
if (ret)
|
|
|
|
goto disable_efuse;
|
|
|
|
|
|
|
|
/* Read data from efuse memory. */
|
|
|
|
ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD,
|
|
|
|
&buf);
|
|
|
|
if (ret)
|
|
|
|
goto disable_efuse;
|
|
|
|
|
|
|
|
/* Clear the read done flag. */
|
|
|
|
ret = regmap_update_bits(efuse->regmap,
|
|
|
|
efuse->base + SC27XX_EFUSE_MODE_CTRL,
|
|
|
|
SC27XX_EFUSE_CLR_RDDONE,
|
|
|
|
SC27XX_EFUSE_CLR_RDDONE);
|
|
|
|
|
|
|
|
disable_efuse:
|
|
|
|
/* Disable the efuse controller after reading. */
|
|
|
|
regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
|
|
|
|
unlock_efuse:
|
|
|
|
sc27xx_efuse_unlock(efuse);
|
|
|
|
|
2019-01-28 23:54:54 +08:00
|
|
|
if (!ret) {
|
|
|
|
buf >>= blk_offset;
|
2018-07-11 18:20:41 +08:00
|
|
|
memcpy(val, &buf, bytes);
|
2019-01-28 23:54:54 +08:00
|
|
|
}
|
2018-07-11 18:20:41 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sc27xx_efuse_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
struct nvmem_config econfig = { };
|
|
|
|
struct nvmem_device *nvmem;
|
|
|
|
struct sc27xx_efuse *efuse;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
|
|
|
|
if (!efuse)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
|
|
if (!efuse->regmap) {
|
|
|
|
dev_err(&pdev->dev, "failed to get efuse regmap\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = of_property_read_u32(np, "reg", &efuse->base);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "failed to get efuse base address\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = of_hwspin_lock_get_id(np, 0);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "failed to get hwspinlock id\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2019-10-29 19:42:32 +08:00
|
|
|
efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
|
2018-07-11 18:20:41 +08:00
|
|
|
if (!efuse->hwlock) {
|
|
|
|
dev_err(&pdev->dev, "failed to request hwspinlock\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_init(&efuse->mutex);
|
|
|
|
efuse->dev = &pdev->dev;
|
|
|
|
|
|
|
|
econfig.stride = 1;
|
|
|
|
econfig.word_size = 1;
|
|
|
|
econfig.read_only = true;
|
|
|
|
econfig.name = "sc27xx-efuse";
|
|
|
|
econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH;
|
|
|
|
econfig.reg_read = sc27xx_efuse_read;
|
|
|
|
econfig.priv = efuse;
|
|
|
|
econfig.dev = &pdev->dev;
|
|
|
|
nvmem = devm_nvmem_register(&pdev->dev, &econfig);
|
|
|
|
if (IS_ERR(nvmem)) {
|
|
|
|
dev_err(&pdev->dev, "failed to register nvmem config\n");
|
|
|
|
return PTR_ERR(nvmem);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id sc27xx_efuse_of_match[] = {
|
|
|
|
{ .compatible = "sprd,sc2731-efuse" },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_driver sc27xx_efuse_driver = {
|
|
|
|
.probe = sc27xx_efuse_probe,
|
|
|
|
.driver = {
|
|
|
|
.name = "sc27xx-efuse",
|
|
|
|
.of_match_table = sc27xx_efuse_of_match,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(sc27xx_efuse_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
|
|
|
|
MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|