blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/backing-dev.h>
|
|
|
|
#include <linux/bio.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/smp.h>
|
|
|
|
|
|
|
|
#include <linux/blk-mq.h>
|
|
|
|
#include "blk-mq.h"
|
|
|
|
#include "blk-mq-tag.h"
|
|
|
|
|
|
|
|
static void blk_mq_sysfs_release(struct kobject *kobj)
|
|
|
|
{
|
2015-01-20 11:00:56 +08:00
|
|
|
struct request_queue *q;
|
|
|
|
|
|
|
|
q = container_of(kobj, struct request_queue, mq_kobj);
|
|
|
|
free_percpu(q->queue_ctx);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void blk_mq_ctx_release(struct kobject *kobj)
|
|
|
|
{
|
|
|
|
struct blk_mq_ctx *ctx;
|
|
|
|
|
|
|
|
ctx = container_of(kobj, struct blk_mq_ctx, kobj);
|
|
|
|
kobject_put(&ctx->queue->mq_kobj);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void blk_mq_hctx_release(struct kobject *kobj)
|
|
|
|
{
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
|
|
|
|
hctx = container_of(kobj, struct blk_mq_hw_ctx, kobj);
|
|
|
|
kfree(hctx);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
struct blk_mq_ctx_sysfs_entry {
|
|
|
|
struct attribute attr;
|
|
|
|
ssize_t (*show)(struct blk_mq_ctx *, char *);
|
|
|
|
ssize_t (*store)(struct blk_mq_ctx *, const char *, size_t);
|
|
|
|
};
|
|
|
|
|
|
|
|
struct blk_mq_hw_ctx_sysfs_entry {
|
|
|
|
struct attribute attr;
|
|
|
|
ssize_t (*show)(struct blk_mq_hw_ctx *, char *);
|
|
|
|
ssize_t (*store)(struct blk_mq_hw_ctx *, const char *, size_t);
|
|
|
|
};
|
|
|
|
|
|
|
|
static ssize_t blk_mq_sysfs_show(struct kobject *kobj, struct attribute *attr,
|
|
|
|
char *page)
|
|
|
|
{
|
|
|
|
struct blk_mq_ctx_sysfs_entry *entry;
|
|
|
|
struct blk_mq_ctx *ctx;
|
|
|
|
struct request_queue *q;
|
|
|
|
ssize_t res;
|
|
|
|
|
|
|
|
entry = container_of(attr, struct blk_mq_ctx_sysfs_entry, attr);
|
|
|
|
ctx = container_of(kobj, struct blk_mq_ctx, kobj);
|
|
|
|
q = ctx->queue;
|
|
|
|
|
|
|
|
if (!entry->show)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
res = -ENOENT;
|
|
|
|
mutex_lock(&q->sysfs_lock);
|
|
|
|
if (!blk_queue_dying(q))
|
|
|
|
res = entry->show(ctx, page);
|
|
|
|
mutex_unlock(&q->sysfs_lock);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_sysfs_store(struct kobject *kobj, struct attribute *attr,
|
|
|
|
const char *page, size_t length)
|
|
|
|
{
|
|
|
|
struct blk_mq_ctx_sysfs_entry *entry;
|
|
|
|
struct blk_mq_ctx *ctx;
|
|
|
|
struct request_queue *q;
|
|
|
|
ssize_t res;
|
|
|
|
|
|
|
|
entry = container_of(attr, struct blk_mq_ctx_sysfs_entry, attr);
|
|
|
|
ctx = container_of(kobj, struct blk_mq_ctx, kobj);
|
|
|
|
q = ctx->queue;
|
|
|
|
|
|
|
|
if (!entry->store)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
res = -ENOENT;
|
|
|
|
mutex_lock(&q->sysfs_lock);
|
|
|
|
if (!blk_queue_dying(q))
|
|
|
|
res = entry->store(ctx, page, length);
|
|
|
|
mutex_unlock(&q->sysfs_lock);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_show(struct kobject *kobj,
|
|
|
|
struct attribute *attr, char *page)
|
|
|
|
{
|
|
|
|
struct blk_mq_hw_ctx_sysfs_entry *entry;
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
struct request_queue *q;
|
|
|
|
ssize_t res;
|
|
|
|
|
|
|
|
entry = container_of(attr, struct blk_mq_hw_ctx_sysfs_entry, attr);
|
|
|
|
hctx = container_of(kobj, struct blk_mq_hw_ctx, kobj);
|
|
|
|
q = hctx->queue;
|
|
|
|
|
|
|
|
if (!entry->show)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
res = -ENOENT;
|
|
|
|
mutex_lock(&q->sysfs_lock);
|
|
|
|
if (!blk_queue_dying(q))
|
|
|
|
res = entry->show(hctx, page);
|
|
|
|
mutex_unlock(&q->sysfs_lock);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_store(struct kobject *kobj,
|
|
|
|
struct attribute *attr, const char *page,
|
|
|
|
size_t length)
|
|
|
|
{
|
|
|
|
struct blk_mq_hw_ctx_sysfs_entry *entry;
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
struct request_queue *q;
|
|
|
|
ssize_t res;
|
|
|
|
|
|
|
|
entry = container_of(attr, struct blk_mq_hw_ctx_sysfs_entry, attr);
|
|
|
|
hctx = container_of(kobj, struct blk_mq_hw_ctx, kobj);
|
|
|
|
q = hctx->queue;
|
|
|
|
|
|
|
|
if (!entry->store)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
res = -ENOENT;
|
|
|
|
mutex_lock(&q->sysfs_lock);
|
|
|
|
if (!blk_queue_dying(q))
|
|
|
|
res = entry->store(hctx, page, length);
|
|
|
|
mutex_unlock(&q->sysfs_lock);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_sysfs_dispatched_show(struct blk_mq_ctx *ctx, char *page)
|
|
|
|
{
|
|
|
|
return sprintf(page, "%lu %lu\n", ctx->rq_dispatched[1],
|
|
|
|
ctx->rq_dispatched[0]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_sysfs_merged_show(struct blk_mq_ctx *ctx, char *page)
|
|
|
|
{
|
|
|
|
return sprintf(page, "%lu\n", ctx->rq_merged);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_sysfs_completed_show(struct blk_mq_ctx *ctx, char *page)
|
|
|
|
{
|
|
|
|
return sprintf(page, "%lu %lu\n", ctx->rq_completed[1],
|
|
|
|
ctx->rq_completed[0]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t sysfs_list_show(char *page, struct list_head *list, char *msg)
|
|
|
|
{
|
|
|
|
char *start_page = page;
|
|
|
|
struct request *rq;
|
|
|
|
|
|
|
|
page += sprintf(page, "%s:\n", msg);
|
|
|
|
|
|
|
|
list_for_each_entry(rq, list, queuelist)
|
|
|
|
page += sprintf(page, "\t%p\n", rq);
|
|
|
|
|
|
|
|
return page - start_page;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_sysfs_rq_list_show(struct blk_mq_ctx *ctx, char *page)
|
|
|
|
{
|
|
|
|
ssize_t ret;
|
|
|
|
|
|
|
|
spin_lock(&ctx->lock);
|
|
|
|
ret = sysfs_list_show(page, &ctx->rq_list, "CTX pending");
|
|
|
|
spin_unlock(&ctx->lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_queued_show(struct blk_mq_hw_ctx *hctx,
|
|
|
|
char *page)
|
|
|
|
{
|
|
|
|
return sprintf(page, "%lu\n", hctx->queued);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_run_show(struct blk_mq_hw_ctx *hctx, char *page)
|
|
|
|
{
|
|
|
|
return sprintf(page, "%lu\n", hctx->run);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_dispatched_show(struct blk_mq_hw_ctx *hctx,
|
|
|
|
char *page)
|
|
|
|
{
|
|
|
|
char *start_page = page;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
page += sprintf(page, "%8u\t%lu\n", 0U, hctx->dispatched[0]);
|
|
|
|
|
|
|
|
for (i = 1; i < BLK_MQ_MAX_DISPATCH_ORDER; i++) {
|
|
|
|
unsigned long d = 1U << (i - 1);
|
|
|
|
|
|
|
|
page += sprintf(page, "%8lu\t%lu\n", d, hctx->dispatched[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
return page - start_page;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_rq_list_show(struct blk_mq_hw_ctx *hctx,
|
|
|
|
char *page)
|
|
|
|
{
|
|
|
|
ssize_t ret;
|
|
|
|
|
|
|
|
spin_lock(&hctx->lock);
|
|
|
|
ret = sysfs_list_show(page, &hctx->dispatch, "HCTX pending");
|
|
|
|
spin_unlock(&hctx->lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t blk_mq_hw_sysfs_tags_show(struct blk_mq_hw_ctx *hctx, char *page)
|
|
|
|
{
|
|
|
|
return blk_mq_tag_sysfs_show(hctx->tags, page);
|
|
|
|
}
|
|
|
|
|
2014-05-14 05:10:52 +08:00
|
|
|
static ssize_t blk_mq_hw_sysfs_active_show(struct blk_mq_hw_ctx *hctx, char *page)
|
|
|
|
{
|
|
|
|
return sprintf(page, "%u\n", atomic_read(&hctx->nr_active));
|
|
|
|
}
|
|
|
|
|
2014-03-21 03:29:18 +08:00
|
|
|
static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page)
|
|
|
|
{
|
2014-04-10 00:53:21 +08:00
|
|
|
unsigned int i, first = 1;
|
2014-03-21 03:29:18 +08:00
|
|
|
ssize_t ret = 0;
|
|
|
|
|
|
|
|
blk_mq_disable_hotplug();
|
|
|
|
|
2014-04-10 00:53:21 +08:00
|
|
|
for_each_cpu(i, hctx->cpumask) {
|
2014-03-21 03:29:18 +08:00
|
|
|
if (first)
|
|
|
|
ret += sprintf(ret + page, "%u", i);
|
|
|
|
else
|
|
|
|
ret += sprintf(ret + page, ", %u", i);
|
|
|
|
|
|
|
|
first = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
blk_mq_enable_hotplug();
|
|
|
|
|
|
|
|
ret += sprintf(ret + page, "\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
static struct blk_mq_ctx_sysfs_entry blk_mq_sysfs_dispatched = {
|
|
|
|
.attr = {.name = "dispatched", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_sysfs_dispatched_show,
|
|
|
|
};
|
|
|
|
static struct blk_mq_ctx_sysfs_entry blk_mq_sysfs_merged = {
|
|
|
|
.attr = {.name = "merged", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_sysfs_merged_show,
|
|
|
|
};
|
|
|
|
static struct blk_mq_ctx_sysfs_entry blk_mq_sysfs_completed = {
|
|
|
|
.attr = {.name = "completed", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_sysfs_completed_show,
|
|
|
|
};
|
|
|
|
static struct blk_mq_ctx_sysfs_entry blk_mq_sysfs_rq_list = {
|
|
|
|
.attr = {.name = "rq_list", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_sysfs_rq_list_show,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct attribute *default_ctx_attrs[] = {
|
|
|
|
&blk_mq_sysfs_dispatched.attr,
|
|
|
|
&blk_mq_sysfs_merged.attr,
|
|
|
|
&blk_mq_sysfs_completed.attr,
|
|
|
|
&blk_mq_sysfs_rq_list.attr,
|
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_queued = {
|
|
|
|
.attr = {.name = "queued", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_queued_show,
|
|
|
|
};
|
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_run = {
|
|
|
|
.attr = {.name = "run", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_run_show,
|
|
|
|
};
|
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_dispatched = {
|
|
|
|
.attr = {.name = "dispatched", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_dispatched_show,
|
|
|
|
};
|
2014-05-14 05:10:52 +08:00
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_active = {
|
|
|
|
.attr = {.name = "active", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_active_show,
|
|
|
|
};
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_pending = {
|
|
|
|
.attr = {.name = "pending", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_rq_list_show,
|
|
|
|
};
|
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_tags = {
|
|
|
|
.attr = {.name = "tags", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_tags_show,
|
|
|
|
};
|
2014-03-21 03:29:18 +08:00
|
|
|
static struct blk_mq_hw_ctx_sysfs_entry blk_mq_hw_sysfs_cpus = {
|
|
|
|
.attr = {.name = "cpu_list", .mode = S_IRUGO },
|
|
|
|
.show = blk_mq_hw_sysfs_cpus_show,
|
|
|
|
};
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
|
|
|
|
static struct attribute *default_hw_ctx_attrs[] = {
|
|
|
|
&blk_mq_hw_sysfs_queued.attr,
|
|
|
|
&blk_mq_hw_sysfs_run.attr,
|
|
|
|
&blk_mq_hw_sysfs_dispatched.attr,
|
|
|
|
&blk_mq_hw_sysfs_pending.attr,
|
|
|
|
&blk_mq_hw_sysfs_tags.attr,
|
2014-03-21 03:29:18 +08:00
|
|
|
&blk_mq_hw_sysfs_cpus.attr,
|
2014-05-14 05:10:52 +08:00
|
|
|
&blk_mq_hw_sysfs_active.attr,
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct sysfs_ops blk_mq_sysfs_ops = {
|
|
|
|
.show = blk_mq_sysfs_show,
|
|
|
|
.store = blk_mq_sysfs_store,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct sysfs_ops blk_mq_hw_sysfs_ops = {
|
|
|
|
.show = blk_mq_hw_sysfs_show,
|
|
|
|
.store = blk_mq_hw_sysfs_store,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct kobj_type blk_mq_ktype = {
|
|
|
|
.sysfs_ops = &blk_mq_sysfs_ops,
|
|
|
|
.release = blk_mq_sysfs_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct kobj_type blk_mq_ctx_ktype = {
|
|
|
|
.sysfs_ops = &blk_mq_sysfs_ops,
|
|
|
|
.default_attrs = default_ctx_attrs,
|
2015-01-20 11:00:56 +08:00
|
|
|
.release = blk_mq_ctx_release,
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct kobj_type blk_mq_hw_ktype = {
|
|
|
|
.sysfs_ops = &blk_mq_hw_sysfs_ops,
|
|
|
|
.default_attrs = default_hw_ctx_attrs,
|
2015-01-20 11:00:56 +08:00
|
|
|
.release = blk_mq_hctx_release,
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
};
|
|
|
|
|
2014-05-31 00:31:13 +08:00
|
|
|
static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)
|
2014-05-30 22:25:36 +08:00
|
|
|
{
|
|
|
|
struct blk_mq_ctx *ctx;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!hctx->nr_ctx || !(hctx->flags & BLK_MQ_F_SYSFS_UP))
|
|
|
|
return;
|
|
|
|
|
|
|
|
hctx_for_each_ctx(hctx, ctx, i)
|
|
|
|
kobject_del(&ctx->kobj);
|
|
|
|
|
|
|
|
kobject_del(&hctx->kobj);
|
|
|
|
}
|
|
|
|
|
2014-05-31 00:31:13 +08:00
|
|
|
static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
|
2014-05-30 22:25:36 +08:00
|
|
|
{
|
|
|
|
struct request_queue *q = hctx->queue;
|
|
|
|
struct blk_mq_ctx *ctx;
|
|
|
|
int i, ret;
|
|
|
|
|
|
|
|
if (!hctx->nr_ctx || !(hctx->flags & BLK_MQ_F_SYSFS_UP))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = kobject_add(&hctx->kobj, &q->mq_kobj, "%u", hctx->queue_num);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
hctx_for_each_ctx(hctx, ctx, i) {
|
2015-01-20 11:00:56 +08:00
|
|
|
kobject_get(&q->mq_kobj);
|
2014-05-30 22:25:36 +08:00
|
|
|
ret = kobject_add(&ctx->kobj, &hctx->kobj, "cpu%u", ctx->cpu);
|
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
void blk_mq_unregister_disk(struct gendisk *disk)
|
|
|
|
{
|
|
|
|
struct request_queue *q = disk->queue;
|
2013-12-06 13:06:41 +08:00
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
struct blk_mq_ctx *ctx;
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
queue_for_each_hw_ctx(q, hctx, i) {
|
2014-05-30 22:25:36 +08:00
|
|
|
blk_mq_unregister_hctx(hctx);
|
|
|
|
|
|
|
|
hctx_for_each_ctx(hctx, ctx, j)
|
2013-12-06 13:06:41 +08:00
|
|
|
kobject_put(&ctx->kobj);
|
2014-05-30 22:25:36 +08:00
|
|
|
|
2013-12-06 13:06:41 +08:00
|
|
|
kobject_put(&hctx->kobj);
|
|
|
|
}
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
|
|
|
|
kobject_uevent(&q->mq_kobj, KOBJ_REMOVE);
|
|
|
|
kobject_del(&q->mq_kobj);
|
2013-12-06 13:06:41 +08:00
|
|
|
kobject_put(&q->mq_kobj);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
|
|
|
|
kobject_put(&disk_to_dev(disk)->kobj);
|
|
|
|
}
|
|
|
|
|
2014-05-30 22:25:36 +08:00
|
|
|
static void blk_mq_sysfs_init(struct request_queue *q)
|
|
|
|
{
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
struct blk_mq_ctx *ctx;
|
2014-12-10 23:38:30 +08:00
|
|
|
int i;
|
2014-05-30 22:25:36 +08:00
|
|
|
|
|
|
|
kobject_init(&q->mq_kobj, &blk_mq_ktype);
|
|
|
|
|
2014-12-10 23:38:30 +08:00
|
|
|
queue_for_each_hw_ctx(q, hctx, i)
|
2014-05-30 22:25:36 +08:00
|
|
|
kobject_init(&hctx->kobj, &blk_mq_hw_ktype);
|
|
|
|
|
2014-12-10 23:38:30 +08:00
|
|
|
queue_for_each_ctx(q, ctx, i)
|
|
|
|
kobject_init(&ctx->kobj, &blk_mq_ctx_ktype);
|
2014-05-30 22:25:36 +08:00
|
|
|
}
|
|
|
|
|
2014-09-25 01:31:50 +08:00
|
|
|
/* see blk_register_queue() */
|
|
|
|
void blk_mq_finish_init(struct request_queue *q)
|
|
|
|
{
|
|
|
|
percpu_ref_switch_to_percpu(&q->mq_usage_counter);
|
|
|
|
}
|
|
|
|
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
int blk_mq_register_disk(struct gendisk *disk)
|
|
|
|
{
|
|
|
|
struct device *dev = disk_to_dev(disk);
|
|
|
|
struct request_queue *q = disk->queue;
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
2014-05-30 22:25:36 +08:00
|
|
|
int ret, i;
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
|
2014-05-30 22:25:36 +08:00
|
|
|
blk_mq_sysfs_init(q);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
|
|
|
|
ret = kobject_add(&q->mq_kobj, kobject_get(&dev->kobj), "%s", "mq");
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
kobject_uevent(&q->mq_kobj, KOBJ_ADD);
|
|
|
|
|
|
|
|
queue_for_each_hw_ctx(q, hctx, i) {
|
2014-05-30 22:25:36 +08:00
|
|
|
hctx->flags |= BLK_MQ_F_SYSFS_UP;
|
|
|
|
ret = blk_mq_register_hctx(hctx);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 16:20:05 +08:00
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ret) {
|
|
|
|
blk_mq_unregister_disk(disk);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2014-05-30 22:25:36 +08:00
|
|
|
|
|
|
|
void blk_mq_sysfs_unregister(struct request_queue *q)
|
|
|
|
{
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
queue_for_each_hw_ctx(q, hctx, i)
|
|
|
|
blk_mq_unregister_hctx(hctx);
|
|
|
|
}
|
|
|
|
|
|
|
|
int blk_mq_sysfs_register(struct request_queue *q)
|
|
|
|
{
|
|
|
|
struct blk_mq_hw_ctx *hctx;
|
|
|
|
int i, ret = 0;
|
|
|
|
|
|
|
|
queue_for_each_hw_ctx(q, hctx, i) {
|
|
|
|
ret = blk_mq_register_hctx(hctx);
|
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|