linux/drivers/scsi/aic7xxx/aic79xx_osm.c

2768 lines
76 KiB
C
Raw Normal View History

/*
* Adaptec AIC79xx device driver for Linux.
*
* $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
*
* --------------------------------------------------------------------------
* Copyright (c) 1994-2000 Justin T. Gibbs.
* Copyright (c) 1997-1999 Doug Ledford
* Copyright (c) 2000-2003 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include "aic79xx_osm.h"
#include "aic79xx_inline.h"
#include <scsi/scsicam.h>
static struct scsi_transport_template *ahd_linux_transport_template = NULL;
#include <linux/init.h> /* __setup */
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/blkdev.h> /* For block_size() */
#include <linux/delay.h> /* For ssleep/msleep */
#include <linux/device.h>
/*
* Bucket size for counting good commands in between bad ones.
*/
#define AHD_LINUX_ERR_THRESH 1000
/*
* Set this to the delay in seconds after SCSI bus reset.
* Note, we honor this only for the initial bus reset.
* The scsi error recovery code performs its own bus settle
* delay handling for error recovery actions.
*/
#ifdef CONFIG_AIC79XX_RESET_DELAY_MS
#define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
#else
#define AIC79XX_RESET_DELAY 5000
#endif
/*
* To change the default number of tagged transactions allowed per-device,
* add a line to the lilo.conf file like:
* append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
* which will result in the first four devices on the first two
* controllers being set to a tagged queue depth of 32.
*
* The tag_commands is an array of 16 to allow for wide and twin adapters.
* Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
* for channel 1.
*/
typedef struct {
uint16_t tag_commands[16]; /* Allow for wide/twin adapters. */
} adapter_tag_info_t;
/*
* Modify this as you see fit for your system.
*
* 0 tagged queuing disabled
* 1 <= n <= 253 n == max tags ever dispatched.
*
* The driver will throttle the number of commands dispatched to a
* device if it returns queue full. For devices with a fixed maximum
* queue depth, the driver will eventually determine this depth and
* lock it in (a console message is printed to indicate that a lock
* has occurred). On some devices, queue full is returned for a temporary
* resource shortage. These devices will return queue full at varying
* depths. The driver will throttle back when the queue fulls occur and
* attempt to slowly increase the depth over time as the device recovers
* from the resource shortage.
*
* In this example, the first line will disable tagged queueing for all
* the devices on the first probed aic79xx adapter.
*
* The second line enables tagged queueing with 4 commands/LUN for IDs
* (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
* driver to attempt to use up to 64 tags for ID 1.
*
* The third line is the same as the first line.
*
* The fourth line disables tagged queueing for devices 0 and 3. It
* enables tagged queueing for the other IDs, with 16 commands/LUN
* for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
* IDs 2, 5-7, and 9-15.
*/
/*
* NOTE: The below structure is for reference only, the actual structure
* to modify in order to change things is just below this comment block.
adapter_tag_info_t aic79xx_tag_info[] =
{
{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
{{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
{{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
};
*/
#ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
#define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
#else
#define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
#endif
#define AIC79XX_CONFIGED_TAG_COMMANDS { \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \
}
/*
* By default, use the number of commands specified by
* the users kernel configuration.
*/
static adapter_tag_info_t aic79xx_tag_info[] =
{
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS},
{AIC79XX_CONFIGED_TAG_COMMANDS}
};
/*
* The I/O cell on the chip is very configurable in respect to its analog
* characteristics. Set the defaults here; they can be overriden with
* the proper insmod parameters.
*/
struct ahd_linux_iocell_opts
{
uint8_t precomp;
uint8_t slewrate;
uint8_t amplitude;
};
#define AIC79XX_DEFAULT_PRECOMP 0xFF
#define AIC79XX_DEFAULT_SLEWRATE 0xFF
#define AIC79XX_DEFAULT_AMPLITUDE 0xFF
#define AIC79XX_DEFAULT_IOOPTS \
{ \
AIC79XX_DEFAULT_PRECOMP, \
AIC79XX_DEFAULT_SLEWRATE, \
AIC79XX_DEFAULT_AMPLITUDE \
}
#define AIC79XX_PRECOMP_INDEX 0
#define AIC79XX_SLEWRATE_INDEX 1
#define AIC79XX_AMPLITUDE_INDEX 2
static struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
{
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS,
AIC79XX_DEFAULT_IOOPTS
};
/*
* There should be a specific return value for this in scsi.h, but
* it seems that most drivers ignore it.
*/
#define DID_UNDERFLOW DID_ERROR
void
ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
{
printk("(scsi%d:%c:%d:%d): ",
ahd->platform_data->host->host_no,
scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
scb != NULL ? SCB_GET_LUN(scb) : -1);
}
/*
* XXX - these options apply unilaterally to _all_ adapters
* cards in the system. This should be fixed. Exceptions to this
* rule are noted in the comments.
*/
/*
* Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
* has no effect on any later resets that might occur due to things like
* SCSI bus timeouts.
*/
static uint32_t aic79xx_no_reset;
/*
* Should we force EXTENDED translation on a controller.
* 0 == Use whatever is in the SEEPROM or default to off
* 1 == Use whatever is in the SEEPROM or default to on
*/
static uint32_t aic79xx_extended;
/*
* PCI bus parity checking of the Adaptec controllers. This is somewhat
* dubious at best. To my knowledge, this option has never actually
* solved a PCI parity problem, but on certain machines with broken PCI
* chipset configurations, it can generate tons of false error messages.
* It's included in the driver for completeness.
* 0 = Shut off PCI parity check
* non-0 = Enable PCI parity check
*
* NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
* variable to -1 you would actually want to simply pass the variable
* name without a number. That will invert the 0 which will result in
* -1.
*/
static uint32_t aic79xx_pci_parity = ~0;
/*
* There are lots of broken chipsets in the world. Some of them will
* violate the PCI spec when we issue byte sized memory writes to our
* controller. I/O mapped register access, if allowed by the given
* platform, will work in almost all cases.
*/
uint32_t aic79xx_allow_memio = ~0;
/*
* So that we can set how long each device is given as a selection timeout.
* The table of values goes like this:
* 0 - 256ms
* 1 - 128ms
* 2 - 64ms
* 3 - 32ms
* We default to 256ms because some older devices need a longer time
* to respond to initial selection.
*/
static uint32_t aic79xx_seltime;
/*
* Certain devices do not perform any aging on commands. Should the
* device be saturated by commands in one portion of the disk, it is
* possible for transactions on far away sectors to never be serviced.
* To handle these devices, we can periodically send an ordered tag to
* force all outstanding transactions to be serviced prior to a new
* transaction.
*/
static uint32_t aic79xx_periodic_otag;
/* Some storage boxes are using an LSI chip which has a bug making it
* impossible to use aic79xx Rev B chip in 320 speeds. The following
* storage boxes have been reported to be buggy:
* EonStor 3U 16-Bay: U16U-G3A3
* EonStor 2U 12-Bay: U12U-G3A3
* SentinelRAID: 2500F R5 / R6
* SentinelRAID: 2500F R1
* SentinelRAID: 2500F/1500F
* SentinelRAID: 150F
*
* To get around this LSI bug, you can set your board to 160 mode
* or you can enable the SLOWCRC bit.
*/
uint32_t aic79xx_slowcrc;
/*
* Module information and settable options.
*/
static char *aic79xx = NULL;
MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>");
MODULE_DESCRIPTION("Adaptec Aic790X U320 SCSI Host Bus Adapter driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(AIC79XX_DRIVER_VERSION);
module_param(aic79xx, charp, 0444);
MODULE_PARM_DESC(aic79xx,
"period-delimited options string:\n"
" verbose Enable verbose/diagnostic logging\n"
" allow_memio Allow device registers to be memory mapped\n"
" debug Bitmask of debug values to enable\n"
" no_reset Supress initial bus resets\n"
" extended Enable extended geometry on all controllers\n"
" periodic_otag Send an ordered tagged transaction\n"
" periodically to prevent tag starvation.\n"
" This may be required by some older disk\n"
" or drives/RAID arrays.\n"
" tag_info:<tag_str> Set per-target tag depth\n"
" global_tag_depth:<int> Global tag depth for all targets on all buses\n"
" slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
" precomp:<pcomp_list> Set the signal precompensation (0-7).\n"
" amplitude:<int> Set the signal amplitude (0-7).\n"
" seltime:<int> Selection Timeout:\n"
" (0/256ms,1/128ms,2/64ms,3/32ms)\n"
" slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
"\n"
" Sample /etc/modprobe.conf line:\n"
" Enable verbose logging\n"
" Set tag depth on Controller 2/Target 2 to 10 tags\n"
" Shorten the selection timeout to 128ms\n"
"\n"
" options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
);
static void ahd_linux_handle_scsi_status(struct ahd_softc *,
struct scsi_device *,
struct scb *);
static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
struct scsi_cmnd *cmd);
static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
struct ahd_devinfo *devinfo);
static void ahd_linux_device_queue_depth(struct scsi_device *);
static int ahd_linux_run_command(struct ahd_softc*,
struct ahd_linux_device *,
struct scsi_cmnd *);
static void ahd_linux_setup_tag_info_global(char *p);
static int aic79xx_setup(char *c);
static int ahd_linux_unit;
/****************************** Inlines ***************************************/
static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
static __inline void
ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
{
struct scsi_cmnd *cmd;
int direction;
cmd = scb->io_ctx;
direction = cmd->sc_data_direction;
ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
if (cmd->use_sg != 0) {
struct scatterlist *sg;
sg = (struct scatterlist *)cmd->request_buffer;
pci_unmap_sg(ahd->dev_softc, sg, cmd->use_sg, direction);
} else if (cmd->request_bufflen != 0) {
pci_unmap_single(ahd->dev_softc,
scb->platform_data->buf_busaddr,
cmd->request_bufflen, direction);
}
}
/******************************** Macros **************************************/
#define BUILD_SCSIID(ahd, cmd) \
(((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
/*
* Return a string describing the driver.
*/
static const char *
ahd_linux_info(struct Scsi_Host *host)
{
static char buffer[512];
char ahd_info[256];
char *bp;
struct ahd_softc *ahd;
bp = &buffer[0];
ahd = *(struct ahd_softc **)host->hostdata;
memset(bp, 0, sizeof(buffer));
strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev ");
strcat(bp, AIC79XX_DRIVER_VERSION);
strcat(bp, "\n");
strcat(bp, " <");
strcat(bp, ahd->description);
strcat(bp, ">\n");
strcat(bp, " ");
ahd_controller_info(ahd, ahd_info);
strcat(bp, ahd_info);
strcat(bp, "\n");
return (bp);
}
/*
* Queue an SCB to the controller.
*/
static int
ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
{
struct ahd_softc *ahd;
struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
int rtn = SCSI_MLQUEUE_HOST_BUSY;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
cmd->scsi_done = scsi_done;
cmd->result = CAM_REQ_INPROG << 16;
rtn = ahd_linux_run_command(ahd, dev, cmd);
return rtn;
}
static inline struct scsi_target **
ahd_linux_target_in_softc(struct scsi_target *starget)
{
struct ahd_softc *ahd =
*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
unsigned int target_offset;
target_offset = starget->id;
if (starget->channel != 0)
target_offset += 8;
return &ahd->platform_data->starget[target_offset];
}
static int
ahd_linux_target_alloc(struct scsi_target *starget)
{
struct ahd_softc *ahd =
*((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
struct seeprom_config *sc = ahd->seep_config;
unsigned long flags;
struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
struct ahd_devinfo devinfo;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
char channel = starget->channel + 'A';
ahd_lock(ahd, &flags);
BUG_ON(*ahd_targp != NULL);
*ahd_targp = starget;
if (sc) {
int flags = sc->device_flags[starget->id];
tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
starget->id, &tstate);
if ((flags & CFPACKETIZED) == 0) {
/* Do not negotiate packetized transfers */
spi_rd_strm(starget) = 0;
spi_pcomp_en(starget) = 0;
spi_rti(starget) = 0;
spi_wr_flow(starget) = 0;
spi_hold_mcs(starget) = 0;
} else {
if ((ahd->features & AHD_RTI) == 0)
spi_rti(starget) = 0;
}
if ((flags & CFQAS) == 0)
spi_qas(starget) = 0;
/* Transinfo values have been set to BIOS settings */
spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
spi_min_period(starget) = tinfo->user.period;
spi_max_offset(starget) = tinfo->user.offset;
}
tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
starget->id, &tstate);
ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
CAM_LUN_WILDCARD, channel,
ROLE_INITIATOR);
ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
AHD_TRANS_GOAL, /*paused*/FALSE);
ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_GOAL, /*paused*/FALSE);
ahd_unlock(ahd, &flags);
return 0;
}
static void
ahd_linux_target_destroy(struct scsi_target *starget)
{
struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
*ahd_targp = NULL;
}
static int
ahd_linux_slave_alloc(struct scsi_device *sdev)
{
struct ahd_softc *ahd =
*((struct ahd_softc **)sdev->host->hostdata);
struct ahd_linux_device *dev;
if (bootverbose)
printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
dev = scsi_transport_device_data(sdev);
memset(dev, 0, sizeof(*dev));
/*
* We start out life using untagged
* transactions of which we allow one.
*/
dev->openings = 1;
/*
* Set maxtags to 0. This will be changed if we
* later determine that we are dealing with
* a tagged queuing capable device.
*/
dev->maxtags = 0;
return (0);
}
static int
ahd_linux_slave_configure(struct scsi_device *sdev)
{
struct ahd_softc *ahd;
ahd = *((struct ahd_softc **)sdev->host->hostdata);
if (bootverbose)
sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
ahd_linux_device_queue_depth(sdev);
/* Initial Domain Validation */
if (!spi_initial_dv(sdev->sdev_target))
spi_dv_device(sdev);
return 0;
}
#if defined(__i386__)
/*
* Return the disk geometry for the given SCSI device.
*/
static int
ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
{
uint8_t *bh;
int heads;
int sectors;
int cylinders;
int ret;
int extended;
struct ahd_softc *ahd;
ahd = *((struct ahd_softc **)sdev->host->hostdata);
bh = scsi_bios_ptable(bdev);
if (bh) {
ret = scsi_partsize(bh, capacity,
&geom[2], &geom[0], &geom[1]);
kfree(bh);
if (ret != -1)
return (ret);
}
heads = 64;
sectors = 32;
cylinders = aic_sector_div(capacity, heads, sectors);
if (aic79xx_extended != 0)
extended = 1;
else
extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
if (extended && cylinders >= 1024) {
heads = 255;
sectors = 63;
cylinders = aic_sector_div(capacity, heads, sectors);
}
geom[0] = heads;
geom[1] = sectors;
geom[2] = cylinders;
return (0);
}
#endif
/*
* Abort the current SCSI command(s).
*/
static int
ahd_linux_abort(struct scsi_cmnd *cmd)
{
int error;
error = ahd_linux_queue_abort_cmd(cmd);
return error;
}
/*
* Attempt to send a target reset message to the device that timed out.
*/
static int
ahd_linux_dev_reset(struct scsi_cmnd *cmd)
{
struct ahd_softc *ahd;
struct ahd_linux_device *dev;
struct scb *reset_scb;
u_int cdb_byte;
int retval = SUCCESS;
int paused;
int wait;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
unsigned long flags;
DECLARE_COMPLETION_ONSTACK(done);
reset_scb = NULL;
paused = FALSE;
wait = FALSE;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
scmd_printk(KERN_INFO, cmd,
"Attempting to queue a TARGET RESET message:");
printf("CDB:");
for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
printf(" 0x%x", cmd->cmnd[cdb_byte]);
printf("\n");
/*
* Determine if we currently own this command.
*/
dev = scsi_transport_device_data(cmd->device);
if (dev == NULL) {
/*
* No target device for this command exists,
* so we must not still own the command.
*/
scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
return SUCCESS;
}
/*
* Generate us a new SCB
*/
reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
if (!reset_scb) {
scmd_printk(KERN_INFO, cmd, "No SCB available\n");
return FAILED;
}
tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
cmd->device->id, &tstate);
reset_scb->io_ctx = cmd;
reset_scb->platform_data->dev = dev;
reset_scb->sg_count = 0;
ahd_set_residual(reset_scb, 0);
ahd_set_sense_residual(reset_scb, 0);
reset_scb->platform_data->xfer_len = 0;
reset_scb->hscb->control = 0;
reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
reset_scb->hscb->lun = cmd->device->lun;
reset_scb->hscb->cdb_len = 0;
reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
reset_scb->flags |= SCB_PACKETIZED;
} else {
reset_scb->hscb->control |= MK_MESSAGE;
}
dev->openings--;
dev->active++;
dev->commands_issued++;
ahd_lock(ahd, &flags);
LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
ahd_queue_scb(ahd, reset_scb);
ahd->platform_data->eh_done = &done;
ahd_unlock(ahd, &flags);
printf("%s: Device reset code sleeping\n", ahd_name(ahd));
if (!wait_for_completion_timeout(&done, 5 * HZ)) {
ahd_lock(ahd, &flags);
ahd->platform_data->eh_done = NULL;
ahd_unlock(ahd, &flags);
printf("%s: Device reset timer expired (active %d)\n",
ahd_name(ahd), dev->active);
retval = FAILED;
}
printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
return (retval);
}
/*
* Reset the SCSI bus.
*/
static int
ahd_linux_bus_reset(struct scsi_cmnd *cmd)
{
struct ahd_softc *ahd;
int found;
unsigned long flags;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
printf("%s: Bus reset called for cmd %p\n",
ahd_name(ahd), cmd);
#endif
ahd_lock(ahd, &flags);
found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
/*initiate reset*/TRUE);
ahd_unlock(ahd, &flags);
if (bootverbose)
printf("%s: SCSI bus reset delivered. "
"%d SCBs aborted.\n", ahd_name(ahd), found);
return (SUCCESS);
}
struct scsi_host_template aic79xx_driver_template = {
.module = THIS_MODULE,
.name = "aic79xx",
.proc_name = "aic79xx",
.proc_info = ahd_linux_proc_info,
.info = ahd_linux_info,
.queuecommand = ahd_linux_queue,
.eh_abort_handler = ahd_linux_abort,
.eh_device_reset_handler = ahd_linux_dev_reset,
.eh_bus_reset_handler = ahd_linux_bus_reset,
#if defined(__i386__)
.bios_param = ahd_linux_biosparam,
#endif
.can_queue = AHD_MAX_QUEUE,
.this_id = -1,
.max_sectors = 8192,
.cmd_per_lun = 2,
.use_clustering = ENABLE_CLUSTERING,
.slave_alloc = ahd_linux_slave_alloc,
.slave_configure = ahd_linux_slave_configure,
.target_alloc = ahd_linux_target_alloc,
.target_destroy = ahd_linux_target_destroy,
};
/******************************** Bus DMA *************************************/
int
ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
bus_size_t alignment, bus_size_t boundary,
dma_addr_t lowaddr, dma_addr_t highaddr,
bus_dma_filter_t *filter, void *filterarg,
bus_size_t maxsize, int nsegments,
bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
{
bus_dma_tag_t dmat;
dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
if (dmat == NULL)
return (ENOMEM);
/*
* Linux is very simplistic about DMA memory. For now don't
* maintain all specification information. Once Linux supplies
* better facilities for doing these operations, or the
* needs of this particular driver change, we might need to do
* more here.
*/
dmat->alignment = alignment;
dmat->boundary = boundary;
dmat->maxsize = maxsize;
*ret_tag = dmat;
return (0);
}
void
ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
{
free(dmat, M_DEVBUF);
}
int
ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
int flags, bus_dmamap_t *mapp)
{
*vaddr = pci_alloc_consistent(ahd->dev_softc,
dmat->maxsize, mapp);
if (*vaddr == NULL)
return (ENOMEM);
return(0);
}
void
ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
void* vaddr, bus_dmamap_t map)
{
pci_free_consistent(ahd->dev_softc, dmat->maxsize,
vaddr, map);
}
int
ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
void *cb_arg, int flags)
{
/*
* Assume for now that this will only be used during
* initialization and not for per-transaction buffer mapping.
*/
bus_dma_segment_t stack_sg;
stack_sg.ds_addr = map;
stack_sg.ds_len = dmat->maxsize;
cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
return (0);
}
void
ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
{
}
int
ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
{
/* Nothing to do */
return (0);
}
/********************* Platform Dependent Functions ***************************/
static void
ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
{
if ((instance >= 0)
&& (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
uint8_t *iocell_info;
iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
iocell_info[index] = value & 0xFFFF;
if (bootverbose)
printf("iocell[%d:%ld] = %d\n", instance, index, value);
}
}
static void
ahd_linux_setup_tag_info_global(char *p)
{
int tags, i, j;
tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
printf("Setting Global Tags= %d\n", tags);
for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
for (j = 0; j < AHD_NUM_TARGETS; j++) {
aic79xx_tag_info[i].tag_commands[j] = tags;
}
}
}
static void
ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
{
if ((instance >= 0) && (targ >= 0)
&& (instance < ARRAY_SIZE(aic79xx_tag_info))
&& (targ < AHD_NUM_TARGETS)) {
aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
if (bootverbose)
printf("tag_info[%d:%d] = %d\n", instance, targ, value);
}
}
static char *
ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
void (*callback)(u_long, int, int, int32_t),
u_long callback_arg)
{
char *tok_end;
char *tok_end2;
int i;
int instance;
int targ;
int done;
char tok_list[] = {'.', ',', '{', '}', '\0'};
/* All options use a ':' name/arg separator */
if (*opt_arg != ':')
return (opt_arg);
opt_arg++;
instance = -1;
targ = -1;
done = FALSE;
/*
* Restore separator that may be in
* the middle of our option argument.
*/
tok_end = strchr(opt_arg, '\0');
if (tok_end < end)
*tok_end = ',';
while (!done) {
switch (*opt_arg) {
case '{':
if (instance == -1) {
instance = 0;
} else {
if (depth > 1) {
if (targ == -1)
targ = 0;
} else {
printf("Malformed Option %s\n",
opt_name);
done = TRUE;
}
}
opt_arg++;
break;
case '}':
if (targ != -1)
targ = -1;
else if (instance != -1)
instance = -1;
opt_arg++;
break;
case ',':
case '.':
if (instance == -1)
done = TRUE;
else if (targ >= 0)
targ++;
else if (instance >= 0)
instance++;
opt_arg++;
break;
case '\0':
done = TRUE;
break;
default:
tok_end = end;
for (i = 0; tok_list[i]; i++) {
tok_end2 = strchr(opt_arg, tok_list[i]);
if ((tok_end2) && (tok_end2 < tok_end))
tok_end = tok_end2;
}
callback(callback_arg, instance, targ,
simple_strtol(opt_arg, NULL, 0));
opt_arg = tok_end;
break;
}
}
return (opt_arg);
}
/*
* Handle Linux boot parameters. This routine allows for assigning a value
* to a parameter with a ':' between the parameter and the value.
* ie. aic79xx=stpwlev:1,extended
*/
static int
aic79xx_setup(char *s)
{
int i, n;
char *p;
char *end;
static struct {
const char *name;
uint32_t *flag;
} options[] = {
{ "extended", &aic79xx_extended },
{ "no_reset", &aic79xx_no_reset },
{ "verbose", &aic79xx_verbose },
{ "allow_memio", &aic79xx_allow_memio},
#ifdef AHD_DEBUG
{ "debug", &ahd_debug },
#endif
{ "periodic_otag", &aic79xx_periodic_otag },
{ "pci_parity", &aic79xx_pci_parity },
{ "seltime", &aic79xx_seltime },
{ "tag_info", NULL },
{ "global_tag_depth", NULL},
{ "slewrate", NULL },
{ "precomp", NULL },
{ "amplitude", NULL },
{ "slowcrc", &aic79xx_slowcrc },
};
end = strchr(s, '\0');
/*
* XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
* will never be 0 in this case.
*/
n = 0;
while ((p = strsep(&s, ",.")) != NULL) {
if (*p == '\0')
continue;
for (i = 0; i < ARRAY_SIZE(options); i++) {
n = strlen(options[i].name);
if (strncmp(options[i].name, p, n) == 0)
break;
}
if (i == ARRAY_SIZE(options))
continue;
if (strncmp(p, "global_tag_depth", n) == 0) {
ahd_linux_setup_tag_info_global(p + n);
} else if (strncmp(p, "tag_info", n) == 0) {
s = ahd_parse_brace_option("tag_info", p + n, end,
2, ahd_linux_setup_tag_info, 0);
} else if (strncmp(p, "slewrate", n) == 0) {
s = ahd_parse_brace_option("slewrate",
p + n, end, 1, ahd_linux_setup_iocell_info,
AIC79XX_SLEWRATE_INDEX);
} else if (strncmp(p, "precomp", n) == 0) {
s = ahd_parse_brace_option("precomp",
p + n, end, 1, ahd_linux_setup_iocell_info,
AIC79XX_PRECOMP_INDEX);
} else if (strncmp(p, "amplitude", n) == 0) {
s = ahd_parse_brace_option("amplitude",
p + n, end, 1, ahd_linux_setup_iocell_info,
AIC79XX_AMPLITUDE_INDEX);
} else if (p[n] == ':') {
*(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
} else if (!strncmp(p, "verbose", n)) {
*(options[i].flag) = 1;
} else {
*(options[i].flag) ^= 0xFFFFFFFF;
}
}
return 1;
}
__setup("aic79xx=", aic79xx_setup);
uint32_t aic79xx_verbose;
int
ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
{
char buf[80];
struct Scsi_Host *host;
char *new_name;
u_long s;
int retval;
template->name = ahd->description;
host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
if (host == NULL)
return (ENOMEM);
*((struct ahd_softc **)host->hostdata) = ahd;
ahd->platform_data->host = host;
host->can_queue = AHD_MAX_QUEUE;
host->cmd_per_lun = 2;
host->sg_tablesize = AHD_NSEG;
host->this_id = ahd->our_id;
host->irq = ahd->platform_data->irq;
host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
host->max_lun = AHD_NUM_LUNS;
host->max_channel = 0;
host->sg_tablesize = AHD_NSEG;
ahd_lock(ahd, &s);
ahd_set_unit(ahd, ahd_linux_unit++);
ahd_unlock(ahd, &s);
sprintf(buf, "scsi%d", host->host_no);
new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
if (new_name != NULL) {
strcpy(new_name, buf);
ahd_set_name(ahd, new_name);
}
host->unique_id = ahd->unit;
ahd_linux_initialize_scsi_bus(ahd);
ahd_intr_enable(ahd, TRUE);
host->transportt = ahd_linux_transport_template;
retval = scsi_add_host(host, &ahd->dev_softc->dev);
if (retval) {
printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
scsi_host_put(host);
return retval;
}
scsi_scan_host(host);
return 0;
}
/*
* Place the SCSI bus into a known state by either resetting it,
* or forcing transfer negotiations on the next command to any
* target.
*/
static void
ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
{
u_int target_id;
u_int numtarg;
unsigned long s;
target_id = 0;
numtarg = 0;
if (aic79xx_no_reset != 0)
ahd->flags &= ~AHD_RESET_BUS_A;
if ((ahd->flags & AHD_RESET_BUS_A) != 0)
ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
else
numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
ahd_lock(ahd, &s);
/*
* Force negotiation to async for all targets that
* will not see an initial bus reset.
*/
for (; target_id < numtarg; target_id++) {
struct ahd_devinfo devinfo;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
target_id, &tstate);
ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
ahd_update_neg_request(ahd, &devinfo, tstate,
tinfo, AHD_NEG_ALWAYS);
}
ahd_unlock(ahd, &s);
/* Give the bus some time to recover */
if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
ahd_freeze_simq(ahd);
msleep(AIC79XX_RESET_DELAY);
ahd_release_simq(ahd);
}
}
int
ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
{
ahd->platform_data =
malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT);
if (ahd->platform_data == NULL)
return (ENOMEM);
memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
ahd->platform_data->irq = AHD_LINUX_NOIRQ;
ahd_lockinit(ahd);
ahd->seltime = (aic79xx_seltime & 0x3) << 4;
return (0);
}
void
ahd_platform_free(struct ahd_softc *ahd)
{
struct scsi_target *starget;
int i;
if (ahd->platform_data != NULL) {
/* destroy all of the device and target objects */
for (i = 0; i < AHD_NUM_TARGETS; i++) {
starget = ahd->platform_data->starget[i];
if (starget != NULL) {
ahd->platform_data->starget[i] = NULL;
}
}
if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
free_irq(ahd->platform_data->irq, ahd);
if (ahd->tags[0] == BUS_SPACE_PIO
&& ahd->bshs[0].ioport != 0)
release_region(ahd->bshs[0].ioport, 256);
if (ahd->tags[1] == BUS_SPACE_PIO
&& ahd->bshs[1].ioport != 0)
release_region(ahd->bshs[1].ioport, 256);
if (ahd->tags[0] == BUS_SPACE_MEMIO
&& ahd->bshs[0].maddr != NULL) {
iounmap(ahd->bshs[0].maddr);
release_mem_region(ahd->platform_data->mem_busaddr,
0x1000);
}
if (ahd->platform_data->host)
scsi_host_put(ahd->platform_data->host);
free(ahd->platform_data, M_DEVBUF);
}
}
void
ahd_platform_init(struct ahd_softc *ahd)
{
/*
* Lookup and commit any modified IO Cell options.
*/
if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
struct ahd_linux_iocell_opts *iocell_opts;
iocell_opts = &aic79xx_iocell_info[ahd->unit];
if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
}
}
void
ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
{
ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
SCB_GET_CHANNEL(ahd, scb),
SCB_GET_LUN(scb), SCB_LIST_NULL,
ROLE_UNKNOWN, CAM_REQUEUE_REQ);
}
void
ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
struct ahd_devinfo *devinfo, ahd_queue_alg alg)
{
struct ahd_linux_device *dev;
int was_queuing;
int now_queuing;
if (sdev == NULL)
return;
dev = scsi_transport_device_data(sdev);
if (dev == NULL)
return;
was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
switch (alg) {
default:
case AHD_QUEUE_NONE:
now_queuing = 0;
break;
case AHD_QUEUE_BASIC:
now_queuing = AHD_DEV_Q_BASIC;
break;
case AHD_QUEUE_TAGGED:
now_queuing = AHD_DEV_Q_TAGGED;
break;
}
if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
&& (was_queuing != now_queuing)
&& (dev->active != 0)) {
dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
dev->qfrozen++;
}
dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
if (now_queuing) {
u_int usertags;
usertags = ahd_linux_user_tagdepth(ahd, devinfo);
if (!was_queuing) {
/*
* Start out agressively and allow our
* dynamic queue depth algorithm to take
* care of the rest.
*/
dev->maxtags = usertags;
dev->openings = dev->maxtags - dev->active;
}
if (dev->maxtags == 0) {
/*
* Queueing is disabled by the user.
*/
dev->openings = 1;
} else if (alg == AHD_QUEUE_TAGGED) {
dev->flags |= AHD_DEV_Q_TAGGED;
if (aic79xx_periodic_otag != 0)
dev->flags |= AHD_DEV_PERIODIC_OTAG;
} else
dev->flags |= AHD_DEV_Q_BASIC;
} else {
/* We can only have one opening. */
dev->maxtags = 0;
dev->openings = 1 - dev->active;
}
switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
case AHD_DEV_Q_BASIC:
scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
scsi_activate_tcq(sdev, dev->openings + dev->active);
break;
case AHD_DEV_Q_TAGGED:
scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
scsi_activate_tcq(sdev, dev->openings + dev->active);
break;
default:
/*
* We allow the OS to queue 2 untagged transactions to
* us at any time even though we can only execute them
* serially on the controller/device. This should
* remove some latency.
*/
scsi_deactivate_tcq(sdev, 1);
break;
}
}
int
ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status)
{
return 0;
}
static u_int
ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
{
static int warned_user;
u_int tags;
tags = 0;
if ((ahd->user_discenable & devinfo->target_mask) != 0) {
if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
if (warned_user == 0) {
printf(KERN_WARNING
"aic79xx: WARNING: Insufficient tag_info instances\n"
"aic79xx: for installed controllers. Using defaults\n"
"aic79xx: Please update the aic79xx_tag_info array in\n"
"aic79xx: the aic79xx_osm.c source file.\n");
warned_user++;
}
tags = AHD_MAX_QUEUE;
} else {
adapter_tag_info_t *tag_info;
tag_info = &aic79xx_tag_info[ahd->unit];
tags = tag_info->tag_commands[devinfo->target_offset];
if (tags > AHD_MAX_QUEUE)
tags = AHD_MAX_QUEUE;
}
}
return (tags);
}
/*
* Determines the queue depth for a given device.
*/
static void
ahd_linux_device_queue_depth(struct scsi_device *sdev)
{
struct ahd_devinfo devinfo;
u_int tags;
struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
ahd_compile_devinfo(&devinfo,
ahd->our_id,
sdev->sdev_target->id, sdev->lun,
sdev->sdev_target->channel == 0 ? 'A' : 'B',
ROLE_INITIATOR);
tags = ahd_linux_user_tagdepth(ahd, &devinfo);
if (tags != 0 && sdev->tagged_supported != 0) {
ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
ahd_send_async(ahd, devinfo.channel, devinfo.target,
devinfo.lun, AC_TRANSFER_NEG);
ahd_print_devinfo(ahd, &devinfo);
printf("Tagged Queuing enabled. Depth %d\n", tags);
} else {
ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
ahd_send_async(ahd, devinfo.channel, devinfo.target,
devinfo.lun, AC_TRANSFER_NEG);
}
}
static int
ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
struct scsi_cmnd *cmd)
{
struct scb *scb;
struct hardware_scb *hscb;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
u_int col_idx;
uint16_t mask;
unsigned long flags;
ahd_lock(ahd, &flags);
/*
* Get an scb to use.
*/
tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
cmd->device->id, &tstate);
if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
|| (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
col_idx = AHD_NEVER_COL_IDX;
} else {
col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
cmd->device->lun);
}
if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
ahd->flags |= AHD_RESOURCE_SHORTAGE;
ahd_unlock(ahd, &flags);
return SCSI_MLQUEUE_HOST_BUSY;
}
scb->io_ctx = cmd;
scb->platform_data->dev = dev;
hscb = scb->hscb;
cmd->host_scribble = (char *)scb;
/*
* Fill out basics of the HSCB.
*/
hscb->control = 0;
hscb->scsiid = BUILD_SCSIID(ahd, cmd);
hscb->lun = cmd->device->lun;
scb->hscb->task_management = 0;
mask = SCB_GET_TARGET_MASK(ahd, scb);
if ((ahd->user_discenable & mask) != 0)
hscb->control |= DISCENB;
if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
scb->flags |= SCB_PACKETIZED;
if ((tstate->auto_negotiate & mask) != 0) {
scb->flags |= SCB_AUTO_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
}
if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
int msg_bytes;
uint8_t tag_msgs[2];
msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
hscb->control |= tag_msgs[0];
if (tag_msgs[0] == MSG_ORDERED_TASK)
dev->commands_since_idle_or_otag = 0;
} else
if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
&& (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
hscb->control |= MSG_ORDERED_TASK;
dev->commands_since_idle_or_otag = 0;
} else {
hscb->control |= MSG_SIMPLE_TASK;
}
}
hscb->cdb_len = cmd->cmd_len;
memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
scb->platform_data->xfer_len = 0;
ahd_set_residual(scb, 0);
ahd_set_sense_residual(scb, 0);
scb->sg_count = 0;
if (cmd->use_sg != 0) {
void *sg;
struct scatterlist *cur_seg;
u_int nseg;
int dir;
cur_seg = (struct scatterlist *)cmd->request_buffer;
dir = cmd->sc_data_direction;
nseg = pci_map_sg(ahd->dev_softc, cur_seg,
cmd->use_sg, dir);
scb->platform_data->xfer_len = 0;
for (sg = scb->sg_list; nseg > 0; nseg--, cur_seg++) {
dma_addr_t addr;
bus_size_t len;
addr = sg_dma_address(cur_seg);
len = sg_dma_len(cur_seg);
scb->platform_data->xfer_len += len;
sg = ahd_sg_setup(ahd, scb, sg, addr, len,
/*last*/nseg == 1);
}
} else if (cmd->request_bufflen != 0) {
void *sg;
dma_addr_t addr;
int dir;
sg = scb->sg_list;
dir = cmd->sc_data_direction;
addr = pci_map_single(ahd->dev_softc,
cmd->request_buffer,
cmd->request_bufflen, dir);
scb->platform_data->xfer_len = cmd->request_bufflen;
scb->platform_data->buf_busaddr = addr;
sg = ahd_sg_setup(ahd, scb, sg, addr,
cmd->request_bufflen, /*last*/TRUE);
}
LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
dev->openings--;
dev->active++;
dev->commands_issued++;
if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
dev->commands_since_idle_or_otag++;
scb->flags |= SCB_ACTIVE;
ahd_queue_scb(ahd, scb);
ahd_unlock(ahd, &flags);
return 0;
}
/*
* SCSI controller interrupt handler.
*/
irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
ahd_linux_isr(int irq, void *dev_id)
{
struct ahd_softc *ahd;
u_long flags;
int ours;
ahd = (struct ahd_softc *) dev_id;
ahd_lock(ahd, &flags);
ours = ahd_intr(ahd);
ahd_unlock(ahd, &flags);
return IRQ_RETVAL(ours);
}
void
ahd_send_async(struct ahd_softc *ahd, char channel,
u_int target, u_int lun, ac_code code)
{
switch (code) {
case AC_TRANSFER_NEG:
{
char buf[80];
struct scsi_target *starget;
struct info_str info;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
unsigned int target_ppr_options;
BUG_ON(target == CAM_TARGET_WILDCARD);
info.buffer = buf;
info.length = sizeof(buf);
info.offset = 0;
info.pos = 0;
tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
target, &tstate);
/*
* Don't bother reporting results while
* negotiations are still pending.
*/
if (tinfo->curr.period != tinfo->goal.period
|| tinfo->curr.width != tinfo->goal.width
|| tinfo->curr.offset != tinfo->goal.offset
|| tinfo->curr.ppr_options != tinfo->goal.ppr_options)
if (bootverbose == 0)
break;
/*
* Don't bother reporting results that
* are identical to those last reported.
*/
starget = ahd->platform_data->starget[target];
if (starget == NULL)
break;
target_ppr_options =
(spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
+ (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
+ (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0)
+ (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
+ (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
+ (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
+ (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
+ (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
if (tinfo->curr.period == spi_period(starget)
&& tinfo->curr.width == spi_width(starget)
&& tinfo->curr.offset == spi_offset(starget)
&& tinfo->curr.ppr_options == target_ppr_options)
if (bootverbose == 0)
break;
spi_period(starget) = tinfo->curr.period;
spi_width(starget) = tinfo->curr.width;
spi_offset(starget) = tinfo->curr.offset;
spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
spi_pcomp_en(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
spi_rti(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RTI ? 1 : 0;
spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
spi_display_xfer_agreement(starget);
break;
}
case AC_SENT_BDR:
{
WARN_ON(lun != CAM_LUN_WILDCARD);
scsi_report_device_reset(ahd->platform_data->host,
channel - 'A', target);
break;
}
case AC_BUS_RESET:
if (ahd->platform_data->host != NULL) {
scsi_report_bus_reset(ahd->platform_data->host,
channel - 'A');
}
break;
default:
panic("ahd_send_async: Unexpected async event");
}
}
/*
* Calls the higher level scsi done function and frees the scb.
*/
void
ahd_done(struct ahd_softc *ahd, struct scb *scb)
{
struct scsi_cmnd *cmd;
struct ahd_linux_device *dev;
if ((scb->flags & SCB_ACTIVE) == 0) {
printf("SCB %d done'd twice\n", SCB_GET_TAG(scb));
ahd_dump_card_state(ahd);
panic("Stopping for safety");
}
LIST_REMOVE(scb, pending_links);
cmd = scb->io_ctx;
dev = scb->platform_data->dev;
dev->active--;
dev->openings++;
if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
cmd->result &= ~(CAM_DEV_QFRZN << 16);
dev->qfrozen--;
}
ahd_linux_unmap_scb(ahd, scb);
/*
* Guard against stale sense data.
* The Linux mid-layer assumes that sense
* was retrieved anytime the first byte of
* the sense buffer looks "sane".
*/
cmd->sense_buffer[0] = 0;
if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
uint32_t amount_xferred;
amount_xferred =
ahd_get_transfer_length(scb) - ahd_get_residual(scb);
if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_MISC) != 0) {
ahd_print_path(ahd, scb);
printf("Set CAM_UNCOR_PARITY\n");
}
#endif
ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
#ifdef AHD_REPORT_UNDERFLOWS
/*
* This code is disabled by default as some
* clients of the SCSI system do not properly
* initialize the underflow parameter. This
* results in spurious termination of commands
* that complete as expected (e.g. underflow is
* allowed as command can return variable amounts
* of data.
*/
} else if (amount_xferred < scb->io_ctx->underflow) {
u_int i;
ahd_print_path(ahd, scb);
printf("CDB:");
for (i = 0; i < scb->io_ctx->cmd_len; i++)
printf(" 0x%x", scb->io_ctx->cmnd[i]);
printf("\n");
ahd_print_path(ahd, scb);
printf("Saw underflow (%ld of %ld bytes). "
"Treated as error\n",
ahd_get_residual(scb),
ahd_get_transfer_length(scb));
ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
#endif
} else {
ahd_set_transaction_status(scb, CAM_REQ_CMP);
}
} else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
}
if (dev->openings == 1
&& ahd_get_transaction_status(scb) == CAM_REQ_CMP
&& ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
dev->tag_success_count++;
/*
* Some devices deal with temporary internal resource
* shortages by returning queue full. When the queue
* full occurrs, we throttle back. Slowly try to get
* back to our previous queue depth.
*/
if ((dev->openings + dev->active) < dev->maxtags
&& dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
dev->tag_success_count = 0;
dev->openings++;
}
if (dev->active == 0)
dev->commands_since_idle_or_otag = 0;
if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
printf("Recovery SCB completes\n");
if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
|| ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
if (ahd->platform_data->eh_done)
complete(ahd->platform_data->eh_done);
}
ahd_free_scb(ahd, scb);
ahd_linux_queue_cmd_complete(ahd, cmd);
}
static void
ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
struct scsi_device *sdev, struct scb *scb)
{
struct ahd_devinfo devinfo;
struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
ahd_compile_devinfo(&devinfo,
ahd->our_id,
sdev->sdev_target->id, sdev->lun,
sdev->sdev_target->channel == 0 ? 'A' : 'B',
ROLE_INITIATOR);
/*
* We don't currently trust the mid-layer to
* properly deal with queue full or busy. So,
* when one occurs, we tell the mid-layer to
* unconditionally requeue the command to us
* so that we can retry it ourselves. We also
* implement our own throttling mechanism so
* we don't clobber the device with too many
* commands.
*/
switch (ahd_get_scsi_status(scb)) {
default:
break;
case SCSI_STATUS_CHECK_COND:
case SCSI_STATUS_CMD_TERMINATED:
{
struct scsi_cmnd *cmd;
/*
* Copy sense information to the OS's cmd
* structure if it is available.
*/
cmd = scb->io_ctx;
if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
struct scsi_status_iu_header *siu;
u_int sense_size;
u_int sense_offset;
if (scb->flags & SCB_SENSE) {
sense_size = min(sizeof(struct scsi_sense_data)
- ahd_get_sense_residual(scb),
(u_long)sizeof(cmd->sense_buffer));
sense_offset = 0;
} else {
/*
* Copy only the sense data into the provided
* buffer.
*/
siu = (struct scsi_status_iu_header *)
scb->sense_data;
sense_size = min_t(size_t,
scsi_4btoul(siu->sense_length),
sizeof(cmd->sense_buffer));
sense_offset = SIU_SENSE_OFFSET(siu);
}
memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
memcpy(cmd->sense_buffer,
ahd_get_sense_buf(ahd, scb)
+ sense_offset, sense_size);
cmd->result |= (DRIVER_SENSE << 24);
#ifdef AHD_DEBUG
if (ahd_debug & AHD_SHOW_SENSE) {
int i;
printf("Copied %d bytes of sense data at %d:",
sense_size, sense_offset);
for (i = 0; i < sense_size; i++) {
if ((i & 0xF) == 0)
printf("\n");
printf("0x%x ", cmd->sense_buffer[i]);
}
printf("\n");
}
#endif
}
break;
}
case SCSI_STATUS_QUEUE_FULL:
/*
* By the time the core driver has returned this
* command, all other commands that were queued
* to us but not the device have been returned.
* This ensures that dev->active is equal to
* the number of commands actually queued to
* the device.
*/
dev->tag_success_count = 0;
if (dev->active != 0) {
/*
* Drop our opening count to the number
* of commands currently outstanding.
*/
dev->openings = 0;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
ahd_print_path(ahd, scb);
printf("Dropping tag count to %d\n",
dev->active);
}
#endif
if (dev->active == dev->tags_on_last_queuefull) {
dev->last_queuefull_same_count++;
/*
* If we repeatedly see a queue full
* at the same queue depth, this
* device has a fixed number of tag
* slots. Lock in this tag depth
* so we stop seeing queue fulls from
* this device.
*/
if (dev->last_queuefull_same_count
== AHD_LOCK_TAGS_COUNT) {
dev->maxtags = dev->active;
ahd_print_path(ahd, scb);
printf("Locking max tag count at %d\n",
dev->active);
}
} else {
dev->tags_on_last_queuefull = dev->active;
dev->last_queuefull_same_count = 0;
}
ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
ahd_set_scsi_status(scb, SCSI_STATUS_OK);
ahd_platform_set_tags(ahd, sdev, &devinfo,
(dev->flags & AHD_DEV_Q_BASIC)
? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
break;
}
/*
* Drop down to a single opening, and treat this
* as if the target returned BUSY SCSI status.
*/
dev->openings = 1;
ahd_platform_set_tags(ahd, sdev, &devinfo,
(dev->flags & AHD_DEV_Q_BASIC)
? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
}
}
static void
ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
{
int status;
int new_status = DID_OK;
int do_fallback = 0;
int scsi_status;
/*
* Map CAM error codes into Linux Error codes. We
* avoid the conversion so that the DV code has the
* full error information available when making
* state change decisions.
*/
status = ahd_cmd_get_transaction_status(cmd);
switch (status) {
case CAM_REQ_INPROG:
case CAM_REQ_CMP:
new_status = DID_OK;
break;
case CAM_AUTOSENSE_FAIL:
new_status = DID_ERROR;
/* Fallthrough */
case CAM_SCSI_STATUS_ERROR:
scsi_status = ahd_cmd_get_scsi_status(cmd);
switch(scsi_status) {
case SCSI_STATUS_CMD_TERMINATED:
case SCSI_STATUS_CHECK_COND:
if ((cmd->result >> 24) != DRIVER_SENSE) {
do_fallback = 1;
} else {
struct scsi_sense_data *sense;
sense = (struct scsi_sense_data *)
&cmd->sense_buffer;
if (sense->extra_len >= 5 &&
(sense->add_sense_code == 0x47
|| sense->add_sense_code == 0x48))
do_fallback = 1;
}
break;
default:
break;
}
break;
case CAM_REQ_ABORTED:
new_status = DID_ABORT;
break;
case CAM_BUSY:
new_status = DID_BUS_BUSY;
break;
case CAM_REQ_INVALID:
case CAM_PATH_INVALID:
new_status = DID_BAD_TARGET;
break;
case CAM_SEL_TIMEOUT:
new_status = DID_NO_CONNECT;
break;
case CAM_SCSI_BUS_RESET:
case CAM_BDR_SENT:
new_status = DID_RESET;
break;
case CAM_UNCOR_PARITY:
new_status = DID_PARITY;
do_fallback = 1;
break;
case CAM_CMD_TIMEOUT:
new_status = DID_TIME_OUT;
do_fallback = 1;
break;
case CAM_REQ_CMP_ERR:
case CAM_UNEXP_BUSFREE:
case CAM_DATA_RUN_ERR:
new_status = DID_ERROR;
do_fallback = 1;
break;
case CAM_UA_ABORT:
case CAM_NO_HBA:
case CAM_SEQUENCE_FAIL:
case CAM_CCB_LEN_ERR:
case CAM_PROVIDE_FAIL:
case CAM_REQ_TERMIO:
case CAM_UNREC_HBA_ERROR:
case CAM_REQ_TOO_BIG:
new_status = DID_ERROR;
break;
case CAM_REQUEUE_REQ:
new_status = DID_REQUEUE;
break;
default:
/* We should never get here */
new_status = DID_ERROR;
break;
}
if (do_fallback) {
printf("%s: device overrun (status %x) on %d:%d:%d\n",
ahd_name(ahd), status, cmd->device->channel,
cmd->device->id, cmd->device->lun);
}
ahd_cmd_set_transaction_status(cmd, new_status);
cmd->scsi_done(cmd);
}
void
ahd_freeze_simq(struct ahd_softc *ahd)
{
scsi_block_requests(ahd->platform_data->host);
}
void
ahd_release_simq(struct ahd_softc *ahd)
{
scsi_unblock_requests(ahd->platform_data->host);
}
static int
ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
{
struct ahd_softc *ahd;
struct ahd_linux_device *dev;
struct scb *pending_scb;
u_int saved_scbptr;
u_int active_scbptr;
u_int last_phase;
u_int saved_scsiid;
u_int cdb_byte;
int retval;
int was_paused;
int paused;
int wait;
int disconnected;
ahd_mode_state saved_modes;
unsigned long flags;
pending_scb = NULL;
paused = FALSE;
wait = FALSE;
ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
scmd_printk(KERN_INFO, cmd,
"Attempting to queue an ABORT message:");
printf("CDB:");
for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
printf(" 0x%x", cmd->cmnd[cdb_byte]);
printf("\n");
ahd_lock(ahd, &flags);
/*
* First determine if we currently own this command.
* Start by searching the device queue. If not found
* there, check the pending_scb list. If not found
* at all, and the system wanted us to just abort the
* command, return success.
*/
dev = scsi_transport_device_data(cmd->device);
if (dev == NULL) {
/*
* No target device for this command exists,
* so we must not still own the command.
*/
scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
retval = SUCCESS;
goto no_cmd;
}
/*
* See if we can find a matching cmd in the pending list.
*/
LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
if (pending_scb->io_ctx == cmd)
break;
}
if (pending_scb == NULL) {
scmd_printk(KERN_INFO, cmd, "Command not found\n");
goto no_cmd;
}
if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
/*
* We can't queue two recovery actions using the same SCB
*/
retval = FAILED;
goto done;
}
/*
* Ensure that the card doesn't do anything
* behind our back. Also make sure that we
* didn't "just" miss an interrupt that would
* affect this cmd.
*/
was_paused = ahd_is_paused(ahd);
ahd_pause_and_flushwork(ahd);
paused = TRUE;
if ((pending_scb->flags & SCB_ACTIVE) == 0) {
scmd_printk(KERN_INFO, cmd, "Command already completed\n");
goto no_cmd;
}
printf("%s: At time of recovery, card was %spaused\n",
ahd_name(ahd), was_paused ? "" : "not ");
ahd_dump_card_state(ahd);
disconnected = TRUE;
if (ahd_search_qinfifo(ahd, cmd->device->id,
cmd->device->channel + 'A',
cmd->device->lun,
pending_scb->hscb->tag,
ROLE_INITIATOR, CAM_REQ_ABORTED,
SEARCH_COMPLETE) > 0) {
printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
ahd_name(ahd), cmd->device->channel,
cmd->device->id, cmd->device->lun);
retval = SUCCESS;
goto done;
}
saved_modes = ahd_save_modes(ahd);
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
last_phase = ahd_inb(ahd, LASTPHASE);
saved_scbptr = ahd_get_scbptr(ahd);
active_scbptr = saved_scbptr;
if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
struct scb *bus_scb;
bus_scb = ahd_lookup_scb(ahd, active_scbptr);
if (bus_scb == pending_scb)
disconnected = FALSE;
}
/*
* At this point, pending_scb is the scb associated with the
* passed in command. That command is currently active on the
* bus or is in the disconnected state.
*/
saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
if (last_phase != P_BUSFREE
&& SCB_GET_TAG(pending_scb) == active_scbptr) {
/*
* We're active on the bus, so assert ATN
* and hope that the target responds.
*/
pending_scb = ahd_lookup_scb(ahd, active_scbptr);
pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
ahd_outb(ahd, MSG_OUT, HOST_MSG);
ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
wait = TRUE;
} else if (disconnected) {
/*
* Actually re-queue this SCB in an attempt
* to select the device before it reconnects.
*/
pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
pending_scb->hscb->cdb_len = 0;
pending_scb->hscb->task_attribute = 0;
pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
/*
* Mark the SCB has having an outstanding
* task management function. Should the command
* complete normally before the task management
* function can be sent, the host will be notified
* to abort our requeued SCB.
*/
ahd_outb(ahd, SCB_TASK_MANAGEMENT,
pending_scb->hscb->task_management);
} else {
/*
* If non-packetized, set the MK_MESSAGE control
* bit indicating that we desire to send a message.
* We also set the disconnected flag since there is
* no guarantee that our SCB control byte matches
* the version on the card. We don't want the
* sequencer to abort the command thinking an
* unsolicited reselection occurred.
*/
pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
/*
* The sequencer will never re-reference the
* in-core SCB. To make sure we are notified
* during reslection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
ahd_outb(ahd, SCB_CONTROL,
ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
}
/*
* Clear out any entries in the QINFIFO first
* so we are the next SCB for this target
* to run.
*/
ahd_search_qinfifo(ahd, cmd->device->id,
cmd->device->channel + 'A', cmd->device->lun,
SCB_LIST_NULL, ROLE_INITIATOR,
CAM_REQUEUE_REQ, SEARCH_COMPLETE);
ahd_qinfifo_requeue_tail(ahd, pending_scb);
ahd_set_scbptr(ahd, saved_scbptr);
ahd_print_path(ahd, pending_scb);
printf("Device is disconnected, re-queuing SCB\n");
wait = TRUE;
} else {
scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
retval = FAILED;
goto done;
}
no_cmd:
/*
* Our assumption is that if we don't have the command, no
* recovery action was required, so we return success. Again,
* the semantics of the mid-layer recovery engine are not
* well defined, so this may change in time.
*/
retval = SUCCESS;
done:
if (paused)
ahd_unpause(ahd);
if (wait) {
DECLARE_COMPLETION_ONSTACK(done);
ahd->platform_data->eh_done = &done;
ahd_unlock(ahd, &flags);
printf("%s: Recovery code sleeping\n", ahd_name(ahd));
if (!wait_for_completion_timeout(&done, 5 * HZ)) {
ahd_lock(ahd, &flags);
ahd->platform_data->eh_done = NULL;
ahd_unlock(ahd, &flags);
printf("%s: Timer Expired (active %d)\n",
ahd_name(ahd), dev->active);
retval = FAILED;
}
printf("Recovery code awake\n");
} else
ahd_unlock(ahd, &flags);
if (retval != SUCCESS)
printf("%s: Command abort returning 0x%x\n",
ahd_name(ahd), retval);
return retval;
}
static void ahd_linux_set_width(struct scsi_target *starget, int width)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_devinfo devinfo;
unsigned long flags;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_lock(ahd, &flags);
ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_period(struct scsi_target *starget, int period)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options;
unsigned int dt;
unsigned long flags;
unsigned long offset = tinfo->goal.offset;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: set period to %d\n", ahd_name(ahd), period);
#endif
if (offset == 0)
offset = MAX_OFFSET;
if (period < 8)
period = 8;
if (period < 10) {
ppr_options |= MSG_EXT_PPR_DT_REQ;
if (period == 8)
ppr_options |= MSG_EXT_PPR_IU_REQ;
}
dt = ppr_options & MSG_EXT_PPR_DT_REQ;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
/* all PPR requests apart from QAS require wide transfers */
if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
if (spi_width(starget) == 0)
ppr_options &= MSG_EXT_PPR_QAS_REQ;
}
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = 0;
unsigned int period = 0;
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: set offset to %d\n", ahd_name(ahd), offset);
#endif
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
if (offset != 0) {
period = tinfo->goal.period;
ppr_options = tinfo->goal.ppr_options;
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
}
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_DT_REQ;
unsigned int period = tinfo->goal.period;
unsigned int width = tinfo->goal.width;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s DT\n", ahd_name(ahd),
dt ? "enabling" : "disabling");
#endif
if (dt) {
ppr_options |= MSG_EXT_PPR_DT_REQ;
if (!width)
ahd_linux_set_width(starget, 1);
} else {
if (period <= 9)
period = 10; /* If resetting DT, period must be >= 25ns */
/* IU is invalid without DT set */
ppr_options &= ~MSG_EXT_PPR_IU_REQ;
}
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_QAS_REQ;
unsigned int period = tinfo->goal.period;
unsigned int dt;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s QAS\n", ahd_name(ahd),
qas ? "enabling" : "disabling");
#endif
if (qas) {
ppr_options |= MSG_EXT_PPR_QAS_REQ;
}
dt = ppr_options & MSG_EXT_PPR_DT_REQ;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_IU_REQ;
unsigned int period = tinfo->goal.period;
unsigned int dt;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s IU\n", ahd_name(ahd),
iu ? "enabling" : "disabling");
#endif
if (iu) {
ppr_options |= MSG_EXT_PPR_IU_REQ;
ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
}
dt = ppr_options & MSG_EXT_PPR_DT_REQ;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_RD_STRM;
unsigned int period = tinfo->goal.period;
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s Read Streaming\n", ahd_name(ahd),
rdstrm ? "enabling" : "disabling");
#endif
if (rdstrm)
ppr_options |= MSG_EXT_PPR_RD_STRM;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_WR_FLOW;
unsigned int period = tinfo->goal.period;
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s Write Flow Control\n", ahd_name(ahd),
wrflow ? "enabling" : "disabling");
#endif
if (wrflow)
ppr_options |= MSG_EXT_PPR_WR_FLOW;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_RTI;
unsigned int period = tinfo->goal.period;
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
if ((ahd->features & AHD_RTI) == 0) {
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: RTI not available\n", ahd_name(ahd));
#endif
return;
}
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s RTI\n", ahd_name(ahd),
rti ? "enabling" : "disabling");
#endif
if (rti)
ppr_options |= MSG_EXT_PPR_RTI;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_PCOMP_EN;
unsigned int period = tinfo->goal.period;
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_DV) != 0)
printf("%s: %s Precompensation\n", ahd_name(ahd),
pcomp ? "Enable" : "Disable");
#endif
if (pcomp) {
uint8_t precomp;
if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
struct ahd_linux_iocell_opts *iocell_opts;
iocell_opts = &aic79xx_iocell_info[ahd->unit];
precomp = iocell_opts->precomp;
} else {
precomp = AIC79XX_DEFAULT_PRECOMP;
}
ppr_options |= MSG_EXT_PPR_PCOMP_EN;
AHD_SET_PRECOMP(ahd, precomp);
} else {
AHD_SET_PRECOMP(ahd, 0);
}
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
struct ahd_tmode_tstate *tstate;
struct ahd_initiator_tinfo *tinfo
= ahd_fetch_transinfo(ahd,
starget->channel + 'A',
shost->this_id, starget->id, &tstate);
struct ahd_devinfo devinfo;
unsigned int ppr_options = tinfo->goal.ppr_options
& ~MSG_EXT_PPR_HOLD_MCS;
unsigned int period = tinfo->goal.period;
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
if (hold)
ppr_options |= MSG_EXT_PPR_HOLD_MCS;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
ahd_find_syncrate(ahd, &period, &ppr_options,
dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
ahd_lock(ahd, &flags);
ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
ppr_options, AHD_TRANS_GOAL, FALSE);
ahd_unlock(ahd, &flags);
}
static void ahd_linux_get_signalling(struct Scsi_Host *shost)
{
struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
unsigned long flags;
u8 mode;
ahd_lock(ahd, &flags);
ahd_pause(ahd);
mode = ahd_inb(ahd, SBLKCTL);
ahd_unpause(ahd);
ahd_unlock(ahd, &flags);
if (mode & ENAB40)
spi_signalling(shost) = SPI_SIGNAL_LVD;
else if (mode & ENAB20)
spi_signalling(shost) = SPI_SIGNAL_SE;
else
spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
}
static struct spi_function_template ahd_linux_transport_functions = {
.set_offset = ahd_linux_set_offset,
.show_offset = 1,
.set_period = ahd_linux_set_period,
.show_period = 1,
.set_width = ahd_linux_set_width,
.show_width = 1,
.set_dt = ahd_linux_set_dt,
.show_dt = 1,
.set_iu = ahd_linux_set_iu,
.show_iu = 1,
.set_qas = ahd_linux_set_qas,
.show_qas = 1,
.set_rd_strm = ahd_linux_set_rd_strm,
.show_rd_strm = 1,
.set_wr_flow = ahd_linux_set_wr_flow,
.show_wr_flow = 1,
.set_rti = ahd_linux_set_rti,
.show_rti = 1,
.set_pcomp_en = ahd_linux_set_pcomp_en,
.show_pcomp_en = 1,
.set_hold_mcs = ahd_linux_set_hold_mcs,
.show_hold_mcs = 1,
.get_signalling = ahd_linux_get_signalling,
};
static int __init
ahd_linux_init(void)
{
int error = 0;
/*
* If we've been passed any parameters, process them now.
*/
if (aic79xx)
aic79xx_setup(aic79xx);
ahd_linux_transport_template =
spi_attach_transport(&ahd_linux_transport_functions);
if (!ahd_linux_transport_template)
return -ENODEV;
scsi_transport_reserve_device(ahd_linux_transport_template,
sizeof(struct ahd_linux_device));
error = ahd_linux_pci_init();
if (error)
spi_release_transport(ahd_linux_transport_template);
return error;
}
static void __exit
ahd_linux_exit(void)
{
ahd_linux_pci_exit();
spi_release_transport(ahd_linux_transport_template);
}
module_init(ahd_linux_init);
module_exit(ahd_linux_exit);