linux/drivers/dma/dmatest.c

1322 lines
33 KiB
C
Raw Normal View History

/*
* DMA Engine test module
*
* Copyright (C) 2007 Atmel Corporation
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
* Copyright (C) 2013 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/freezer.h>
#include <linux/init.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/random.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/wait.h>
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
static unsigned int test_buf_size = 16384;
module_param(test_buf_size, uint, S_IRUGO);
MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer");
static char test_channel[20];
module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO);
MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)");
static char test_device[20];
module_param_string(device, test_device, sizeof(test_device), S_IRUGO);
MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)");
static unsigned int threads_per_chan = 1;
module_param(threads_per_chan, uint, S_IRUGO);
MODULE_PARM_DESC(threads_per_chan,
"Number of threads to start per channel (default: 1)");
static unsigned int max_channels;
module_param(max_channels, uint, S_IRUGO);
MODULE_PARM_DESC(max_channels,
"Maximum number of channels to use (default: all)");
static unsigned int iterations;
module_param(iterations, uint, S_IRUGO);
MODULE_PARM_DESC(iterations,
"Iterations before stopping test (default: infinite)");
static unsigned int xor_sources = 3;
module_param(xor_sources, uint, S_IRUGO);
MODULE_PARM_DESC(xor_sources,
"Number of xor source buffers (default: 3)");
static unsigned int pq_sources = 3;
module_param(pq_sources, uint, S_IRUGO);
MODULE_PARM_DESC(pq_sources,
"Number of p+q source buffers (default: 3)");
static int timeout = 3000;
module_param(timeout, uint, S_IRUGO);
MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), "
"Pass -1 for infinite timeout");
/* Maximum amount of mismatched bytes in buffer to print */
#define MAX_ERROR_COUNT 32
/*
* Initialization patterns. All bytes in the source buffer has bit 7
* set, all bytes in the destination buffer has bit 7 cleared.
*
* Bit 6 is set for all bytes which are to be copied by the DMA
* engine. Bit 5 is set for all bytes which are to be overwritten by
* the DMA engine.
*
* The remaining bits are the inverse of a counter which increments by
* one for each byte address.
*/
#define PATTERN_SRC 0x80
#define PATTERN_DST 0x00
#define PATTERN_COPY 0x40
#define PATTERN_OVERWRITE 0x20
#define PATTERN_COUNT_MASK 0x1f
enum dmatest_error_type {
DMATEST_ET_OK,
DMATEST_ET_MAP_SRC,
DMATEST_ET_MAP_DST,
DMATEST_ET_PREP,
DMATEST_ET_SUBMIT,
DMATEST_ET_TIMEOUT,
DMATEST_ET_DMA_ERROR,
DMATEST_ET_DMA_IN_PROGRESS,
DMATEST_ET_VERIFY,
DMATEST_ET_VERIFY_BUF,
};
struct dmatest_verify_buffer {
unsigned int index;
u8 expected;
u8 actual;
};
struct dmatest_verify_result {
unsigned int error_count;
struct dmatest_verify_buffer data[MAX_ERROR_COUNT];
u8 pattern;
bool is_srcbuf;
};
struct dmatest_thread_result {
struct list_head node;
unsigned int n;
unsigned int src_off;
unsigned int dst_off;
unsigned int len;
enum dmatest_error_type type;
union {
unsigned long data;
dma_cookie_t cookie;
enum dma_status status;
int error;
struct dmatest_verify_result *vr;
};
};
struct dmatest_result {
struct list_head node;
char *name;
struct list_head results;
};
struct dmatest_info;
struct dmatest_thread {
struct list_head node;
struct dmatest_info *info;
struct task_struct *task;
struct dma_chan *chan;
u8 **srcs;
u8 **dsts;
enum dma_transaction_type type;
bool done;
};
struct dmatest_chan {
struct list_head node;
struct dma_chan *chan;
struct list_head threads;
};
/**
* struct dmatest_params - test parameters.
* @buf_size: size of the memcpy test buffer
* @channel: bus ID of the channel to test
* @device: bus ID of the DMA Engine to test
* @threads_per_chan: number of threads to start per channel
* @max_channels: maximum number of channels to use
* @iterations: iterations before stopping test
* @xor_sources: number of xor source buffers
* @pq_sources: number of p+q source buffers
* @timeout: transfer timeout in msec, -1 for infinite timeout
*/
struct dmatest_params {
unsigned int buf_size;
char channel[20];
char device[20];
unsigned int threads_per_chan;
unsigned int max_channels;
unsigned int iterations;
unsigned int xor_sources;
unsigned int pq_sources;
int timeout;
};
/**
* struct dmatest_info - test information.
* @params: test parameters
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
* @lock: access protection to the fields of this structure
*/
struct dmatest_info {
/* Test parameters */
struct dmatest_params params;
/* Internal state */
struct list_head channels;
unsigned int nr_channels;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
struct mutex lock;
/* debugfs related stuff */
struct dentry *root;
struct dmatest_params dbgfs_params;
/* Test results */
struct list_head results;
struct mutex results_lock;
};
static struct dmatest_info test_info;
static bool dmatest_match_channel(struct dmatest_params *params,
struct dma_chan *chan)
{
if (params->channel[0] == '\0')
return true;
return strcmp(dma_chan_name(chan), params->channel) == 0;
}
static bool dmatest_match_device(struct dmatest_params *params,
struct dma_device *device)
{
if (params->device[0] == '\0')
return true;
return strcmp(dev_name(device->dev), params->device) == 0;
}
static unsigned long dmatest_random(void)
{
unsigned long buf;
get_random_bytes(&buf, sizeof(buf));
return buf;
}
static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len,
unsigned int buf_size)
{
unsigned int i;
u8 *buf;
for (; (buf = *bufs); bufs++) {
for (i = 0; i < start; i++)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
for ( ; i < start + len; i++)
buf[i] = PATTERN_SRC | PATTERN_COPY
| (~i & PATTERN_COUNT_MASK);
for ( ; i < buf_size; i++)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
buf++;
}
}
static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len,
unsigned int buf_size)
{
unsigned int i;
u8 *buf;
for (; (buf = *bufs); bufs++) {
for (i = 0; i < start; i++)
buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK);
for ( ; i < start + len; i++)
buf[i] = PATTERN_DST | PATTERN_OVERWRITE
| (~i & PATTERN_COUNT_MASK);
for ( ; i < buf_size; i++)
buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK);
}
}
static unsigned int dmatest_verify(struct dmatest_verify_result *vr, u8 **bufs,
unsigned int start, unsigned int end, unsigned int counter,
u8 pattern, bool is_srcbuf)
{
unsigned int i;
unsigned int error_count = 0;
u8 actual;
u8 expected;
u8 *buf;
unsigned int counter_orig = counter;
struct dmatest_verify_buffer *vb;
for (; (buf = *bufs); bufs++) {
counter = counter_orig;
for (i = start; i < end; i++) {
actual = buf[i];
expected = pattern | (~counter & PATTERN_COUNT_MASK);
if (actual != expected) {
if (error_count < MAX_ERROR_COUNT && vr) {
vb = &vr->data[error_count];
vb->index = i;
vb->expected = expected;
vb->actual = actual;
}
error_count++;
}
counter++;
}
}
if (error_count > MAX_ERROR_COUNT)
pr_warning("%s: %u errors suppressed\n",
current->comm, error_count - MAX_ERROR_COUNT);
return error_count;
}
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
/* poor man's completion - we want to use wait_event_freezable() on it */
struct dmatest_done {
bool done;
wait_queue_head_t *wait;
};
static void dmatest_callback(void *arg)
{
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
struct dmatest_done *done = arg;
done->done = true;
wake_up_all(done->wait);
}
static inline void unmap_src(struct device *dev, dma_addr_t *addr, size_t len,
unsigned int count)
{
while (count--)
dma_unmap_single(dev, addr[count], len, DMA_TO_DEVICE);
}
static inline void unmap_dst(struct device *dev, dma_addr_t *addr, size_t len,
unsigned int count)
{
while (count--)
dma_unmap_single(dev, addr[count], len, DMA_BIDIRECTIONAL);
}
static unsigned int min_odd(unsigned int x, unsigned int y)
{
unsigned int val = min(x, y);
return val % 2 ? val : val - 1;
}
static char *verify_result_get_one(struct dmatest_verify_result *vr,
unsigned int i)
{
struct dmatest_verify_buffer *vb = &vr->data[i];
u8 diff = vb->actual ^ vr->pattern;
static char buf[512];
char *msg;
if (vr->is_srcbuf)
msg = "srcbuf overwritten!";
else if ((vr->pattern & PATTERN_COPY)
&& (diff & (PATTERN_COPY | PATTERN_OVERWRITE)))
msg = "dstbuf not copied!";
else if (diff & PATTERN_SRC)
msg = "dstbuf was copied!";
else
msg = "dstbuf mismatch!";
snprintf(buf, sizeof(buf) - 1, "%s [0x%x] Expected %02x, got %02x", msg,
vb->index, vb->expected, vb->actual);
return buf;
}
static char *thread_result_get(const char *name,
struct dmatest_thread_result *tr)
{
static const char * const messages[] = {
[DMATEST_ET_OK] = "No errors",
[DMATEST_ET_MAP_SRC] = "src mapping error",
[DMATEST_ET_MAP_DST] = "dst mapping error",
[DMATEST_ET_PREP] = "prep error",
[DMATEST_ET_SUBMIT] = "submit error",
[DMATEST_ET_TIMEOUT] = "test timed out",
[DMATEST_ET_DMA_ERROR] =
"got completion callback (DMA_ERROR)",
[DMATEST_ET_DMA_IN_PROGRESS] =
"got completion callback (DMA_IN_PROGRESS)",
[DMATEST_ET_VERIFY] = "errors",
[DMATEST_ET_VERIFY_BUF] = "verify errors",
};
static char buf[512];
snprintf(buf, sizeof(buf) - 1,
"%s: #%u: %s with src_off=0x%x ""dst_off=0x%x len=0x%x (%lu)",
name, tr->n, messages[tr->type], tr->src_off, tr->dst_off,
tr->len, tr->data);
return buf;
}
static int thread_result_add(struct dmatest_info *info,
struct dmatest_result *r, enum dmatest_error_type type,
unsigned int n, unsigned int src_off, unsigned int dst_off,
unsigned int len, unsigned long data)
{
struct dmatest_thread_result *tr;
tr = kzalloc(sizeof(*tr), GFP_KERNEL);
if (!tr)
return -ENOMEM;
tr->type = type;
tr->n = n;
tr->src_off = src_off;
tr->dst_off = dst_off;
tr->len = len;
tr->data = data;
mutex_lock(&info->results_lock);
list_add_tail(&tr->node, &r->results);
mutex_unlock(&info->results_lock);
pr_warn("%s\n", thread_result_get(r->name, tr));
return 0;
}
static unsigned int verify_result_add(struct dmatest_info *info,
struct dmatest_result *r, unsigned int n,
unsigned int src_off, unsigned int dst_off, unsigned int len,
u8 **bufs, int whence, unsigned int counter, u8 pattern,
bool is_srcbuf)
{
struct dmatest_verify_result *vr;
unsigned int error_count;
unsigned int buf_off = is_srcbuf ? src_off : dst_off;
unsigned int start, end;
if (whence < 0) {
start = 0;
end = buf_off;
} else if (whence > 0) {
start = buf_off + len;
end = info->params.buf_size;
} else {
start = buf_off;
end = buf_off + len;
}
vr = kmalloc(sizeof(*vr), GFP_KERNEL);
if (!vr) {
pr_warn("dmatest: No memory to store verify result\n");
return dmatest_verify(NULL, bufs, start, end, counter, pattern,
is_srcbuf);
}
vr->pattern = pattern;
vr->is_srcbuf = is_srcbuf;
error_count = dmatest_verify(vr, bufs, start, end, counter, pattern,
is_srcbuf);
if (error_count) {
vr->error_count = error_count;
thread_result_add(info, r, DMATEST_ET_VERIFY_BUF, n, src_off,
dst_off, len, (unsigned long)vr);
return error_count;
}
kfree(vr);
return 0;
}
static void result_free(struct dmatest_info *info, const char *name)
{
struct dmatest_result *r, *_r;
mutex_lock(&info->results_lock);
list_for_each_entry_safe(r, _r, &info->results, node) {
struct dmatest_thread_result *tr, *_tr;
if (name && strcmp(r->name, name))
continue;
list_for_each_entry_safe(tr, _tr, &r->results, node) {
if (tr->type == DMATEST_ET_VERIFY_BUF)
kfree(tr->vr);
list_del(&tr->node);
kfree(tr);
}
kfree(r->name);
list_del(&r->node);
kfree(r);
}
mutex_unlock(&info->results_lock);
}
static struct dmatest_result *result_init(struct dmatest_info *info,
const char *name)
{
struct dmatest_result *r;
r = kzalloc(sizeof(*r), GFP_KERNEL);
if (r) {
r->name = kstrdup(name, GFP_KERNEL);
INIT_LIST_HEAD(&r->results);
mutex_lock(&info->results_lock);
list_add_tail(&r->node, &info->results);
mutex_unlock(&info->results_lock);
}
return r;
}
/*
* This function repeatedly tests DMA transfers of various lengths and
* offsets for a given operation type until it is told to exit by
* kthread_stop(). There may be multiple threads running this function
* in parallel for a single channel, and there may be multiple channels
* being tested in parallel.
*
* Before each test, the source and destination buffer is initialized
* with a known pattern. This pattern is different depending on
* whether it's in an area which is supposed to be copied or
* overwritten, and different in the source and destination buffers.
* So if the DMA engine doesn't copy exactly what we tell it to copy,
* we'll notice.
*/
static int dmatest_func(void *data)
{
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_wait);
struct dmatest_thread *thread = data;
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
struct dmatest_done done = { .wait = &done_wait };
struct dmatest_info *info;
struct dmatest_params *params;
struct dma_chan *chan;
struct dma_device *dev;
const char *thread_name;
unsigned int src_off, dst_off, len;
unsigned int error_count;
unsigned int failed_tests = 0;
unsigned int total_tests = 0;
dma_cookie_t cookie;
enum dma_status status;
enum dma_ctrl_flags flags;
u8 *pq_coefs = NULL;
int ret;
int src_cnt;
int dst_cnt;
int i;
struct dmatest_result *result;
thread_name = current->comm;
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
set_freezable();
ret = -ENOMEM;
smp_rmb();
info = thread->info;
params = &info->params;
chan = thread->chan;
dev = chan->device;
if (thread->type == DMA_MEMCPY)
src_cnt = dst_cnt = 1;
else if (thread->type == DMA_XOR) {
/* force odd to ensure dst = src */
src_cnt = min_odd(params->xor_sources | 1, dev->max_xor);
dst_cnt = 1;
} else if (thread->type == DMA_PQ) {
/* force odd to ensure dst = src */
src_cnt = min_odd(params->pq_sources | 1, dma_maxpq(dev, 0));
dst_cnt = 2;
pq_coefs = kmalloc(params->pq_sources+1, GFP_KERNEL);
if (!pq_coefs)
goto err_thread_type;
for (i = 0; i < src_cnt; i++)
pq_coefs[i] = 1;
} else
goto err_thread_type;
result = result_init(info, thread_name);
if (!result)
goto err_srcs;
thread->srcs = kcalloc(src_cnt+1, sizeof(u8 *), GFP_KERNEL);
if (!thread->srcs)
goto err_srcs;
for (i = 0; i < src_cnt; i++) {
thread->srcs[i] = kmalloc(params->buf_size, GFP_KERNEL);
if (!thread->srcs[i])
goto err_srcbuf;
}
thread->srcs[i] = NULL;
thread->dsts = kcalloc(dst_cnt+1, sizeof(u8 *), GFP_KERNEL);
if (!thread->dsts)
goto err_dsts;
for (i = 0; i < dst_cnt; i++) {
thread->dsts[i] = kmalloc(params->buf_size, GFP_KERNEL);
if (!thread->dsts[i])
goto err_dstbuf;
}
thread->dsts[i] = NULL;
set_user_nice(current, 10);
/*
* src buffers are freed by the DMAEngine code with dma_unmap_single()
* dst buffers are freed by ourselves below
*/
flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT
| DMA_COMPL_SKIP_DEST_UNMAP | DMA_COMPL_SRC_UNMAP_SINGLE;
while (!kthread_should_stop()
&& !(params->iterations && total_tests >= params->iterations)) {
struct dma_async_tx_descriptor *tx = NULL;
dma_addr_t dma_srcs[src_cnt];
dma_addr_t dma_dsts[dst_cnt];
u8 align = 0;
total_tests++;
/* honor alignment restrictions */
if (thread->type == DMA_MEMCPY)
align = dev->copy_align;
else if (thread->type == DMA_XOR)
align = dev->xor_align;
else if (thread->type == DMA_PQ)
align = dev->pq_align;
if (1 << align > params->buf_size) {
pr_err("%u-byte buffer too small for %d-byte alignment\n",
params->buf_size, 1 << align);
break;
}
len = dmatest_random() % params->buf_size + 1;
len = (len >> align) << align;
if (!len)
len = 1 << align;
src_off = dmatest_random() % (params->buf_size - len + 1);
dst_off = dmatest_random() % (params->buf_size - len + 1);
src_off = (src_off >> align) << align;
dst_off = (dst_off >> align) << align;
dmatest_init_srcs(thread->srcs, src_off, len, params->buf_size);
dmatest_init_dsts(thread->dsts, dst_off, len, params->buf_size);
for (i = 0; i < src_cnt; i++) {
u8 *buf = thread->srcs[i] + src_off;
dma_srcs[i] = dma_map_single(dev->dev, buf, len,
DMA_TO_DEVICE);
ret = dma_mapping_error(dev->dev, dma_srcs[i]);
if (ret) {
unmap_src(dev->dev, dma_srcs, len, i);
thread_result_add(info, result,
DMATEST_ET_MAP_SRC,
total_tests, src_off, dst_off,
len, ret);
failed_tests++;
continue;
}
}
/* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
for (i = 0; i < dst_cnt; i++) {
dma_dsts[i] = dma_map_single(dev->dev, thread->dsts[i],
params->buf_size,
DMA_BIDIRECTIONAL);
ret = dma_mapping_error(dev->dev, dma_dsts[i]);
if (ret) {
unmap_src(dev->dev, dma_srcs, len, src_cnt);
unmap_dst(dev->dev, dma_dsts, params->buf_size,
i);
thread_result_add(info, result,
DMATEST_ET_MAP_DST,
total_tests, src_off, dst_off,
len, ret);
failed_tests++;
continue;
}
}
if (thread->type == DMA_MEMCPY)
tx = dev->device_prep_dma_memcpy(chan,
dma_dsts[0] + dst_off,
dma_srcs[0], len,
flags);
else if (thread->type == DMA_XOR)
tx = dev->device_prep_dma_xor(chan,
dma_dsts[0] + dst_off,
dma_srcs, src_cnt,
len, flags);
else if (thread->type == DMA_PQ) {
dma_addr_t dma_pq[dst_cnt];
for (i = 0; i < dst_cnt; i++)
dma_pq[i] = dma_dsts[i] + dst_off;
tx = dev->device_prep_dma_pq(chan, dma_pq, dma_srcs,
src_cnt, pq_coefs,
len, flags);
}
if (!tx) {
unmap_src(dev->dev, dma_srcs, len, src_cnt);
unmap_dst(dev->dev, dma_dsts, params->buf_size,
dst_cnt);
thread_result_add(info, result, DMATEST_ET_PREP,
total_tests, src_off, dst_off,
len, 0);
msleep(100);
failed_tests++;
continue;
}
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
done.done = false;
tx->callback = dmatest_callback;
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
tx->callback_param = &done;
cookie = tx->tx_submit(tx);
if (dma_submit_error(cookie)) {
thread_result_add(info, result, DMATEST_ET_SUBMIT,
total_tests, src_off, dst_off,
len, cookie);
msleep(100);
failed_tests++;
continue;
}
dma_async_issue_pending(chan);
wait_event_freezable_timeout(done_wait, done.done,
msecs_to_jiffies(params->timeout));
status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
if (!done.done) {
/*
* We're leaving the timed out dma operation with
* dangling pointer to done_wait. To make this
* correct, we'll need to allocate wait_done for
* each test iteration and perform "who's gonna
* free it this time?" dancing. For now, just
* leave it dangling.
*/
thread_result_add(info, result, DMATEST_ET_TIMEOUT,
total_tests, src_off, dst_off,
len, 0);
failed_tests++;
continue;
} else if (status != DMA_SUCCESS) {
enum dmatest_error_type type = (status == DMA_ERROR) ?
DMATEST_ET_DMA_ERROR : DMATEST_ET_DMA_IN_PROGRESS;
thread_result_add(info, result, type,
total_tests, src_off, dst_off,
len, status);
failed_tests++;
continue;
}
/* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */
unmap_dst(dev->dev, dma_dsts, params->buf_size, dst_cnt);
error_count = 0;
pr_debug("%s: verifying source buffer...\n", thread_name);
error_count += verify_result_add(info, result, total_tests,
src_off, dst_off, len, thread->srcs, -1,
0, PATTERN_SRC, true);
error_count += verify_result_add(info, result, total_tests,
src_off, dst_off, len, thread->srcs, 0,
src_off, PATTERN_SRC | PATTERN_COPY, true);
error_count += verify_result_add(info, result, total_tests,
src_off, dst_off, len, thread->srcs, 1,
src_off + len, PATTERN_SRC, true);
pr_debug("%s: verifying dest buffer...\n", thread_name);
error_count += verify_result_add(info, result, total_tests,
src_off, dst_off, len, thread->dsts, -1,
0, PATTERN_DST, false);
error_count += verify_result_add(info, result, total_tests,
src_off, dst_off, len, thread->dsts, 0,
src_off, PATTERN_SRC | PATTERN_COPY, false);
error_count += verify_result_add(info, result, total_tests,
src_off, dst_off, len, thread->dsts, 1,
dst_off + len, PATTERN_DST, false);
if (error_count) {
thread_result_add(info, result, DMATEST_ET_VERIFY,
total_tests, src_off, dst_off,
len, error_count);
failed_tests++;
} else {
thread_result_add(info, result, DMATEST_ET_OK,
total_tests, src_off, dst_off,
len, 0);
}
}
ret = 0;
for (i = 0; thread->dsts[i]; i++)
kfree(thread->dsts[i]);
err_dstbuf:
kfree(thread->dsts);
err_dsts:
for (i = 0; thread->srcs[i]; i++)
kfree(thread->srcs[i]);
err_srcbuf:
kfree(thread->srcs);
err_srcs:
kfree(pq_coefs);
err_thread_type:
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
/* terminate all transfers on specified channels */
if (ret)
dmaengine_terminate_all(chan);
thread->done = true;
if (params->iterations > 0)
while (!kthread_should_stop()) {
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
interruptible_sleep_on(&wait_dmatest_exit);
}
return ret;
}
static void dmatest_cleanup_channel(struct dmatest_chan *dtc)
{
struct dmatest_thread *thread;
struct dmatest_thread *_thread;
int ret;
list_for_each_entry_safe(thread, _thread, &dtc->threads, node) {
ret = kthread_stop(thread->task);
pr_debug("dmatest: thread %s exited with status %d\n",
thread->task->comm, ret);
list_del(&thread->node);
kfree(thread);
}
/* terminate all transfers on specified channels */
dmaengine_terminate_all(dtc->chan);
kfree(dtc);
}
static int dmatest_add_threads(struct dmatest_info *info,
struct dmatest_chan *dtc, enum dma_transaction_type type)
{
struct dmatest_params *params = &info->params;
struct dmatest_thread *thread;
struct dma_chan *chan = dtc->chan;
char *op;
unsigned int i;
if (type == DMA_MEMCPY)
op = "copy";
else if (type == DMA_XOR)
op = "xor";
else if (type == DMA_PQ)
op = "pq";
else
return -EINVAL;
for (i = 0; i < params->threads_per_chan; i++) {
thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL);
if (!thread) {
pr_warning("dmatest: No memory for %s-%s%u\n",
dma_chan_name(chan), op, i);
break;
}
thread->info = info;
thread->chan = dtc->chan;
thread->type = type;
smp_wmb();
thread->task = kthread_run(dmatest_func, thread, "%s-%s%u",
dma_chan_name(chan), op, i);
if (IS_ERR(thread->task)) {
pr_warning("dmatest: Failed to run thread %s-%s%u\n",
dma_chan_name(chan), op, i);
kfree(thread);
break;
}
/* srcbuf and dstbuf are allocated by the thread itself */
list_add_tail(&thread->node, &dtc->threads);
}
return i;
}
static int dmatest_add_channel(struct dmatest_info *info,
struct dma_chan *chan)
{
struct dmatest_chan *dtc;
struct dma_device *dma_dev = chan->device;
unsigned int thread_count = 0;
int cnt;
dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL);
if (!dtc) {
pr_warning("dmatest: No memory for %s\n", dma_chan_name(chan));
return -ENOMEM;
}
dtc->chan = chan;
INIT_LIST_HEAD(&dtc->threads);
if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(info, dtc, DMA_MEMCPY);
thread_count += cnt > 0 ? cnt : 0;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(info, dtc, DMA_XOR);
thread_count += cnt > 0 ? cnt : 0;
}
if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(info, dtc, DMA_PQ);
thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
thread_count, dma_chan_name(chan));
list_add_tail(&dtc->node, &info->channels);
info->nr_channels++;
return 0;
}
static bool filter(struct dma_chan *chan, void *param)
{
struct dmatest_params *params = param;
if (!dmatest_match_channel(params, chan) ||
!dmatest_match_device(params, chan->device))
return false;
else
return true;
}
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
static int __run_threaded_test(struct dmatest_info *info)
{
dma_cap_mask_t mask;
struct dma_chan *chan;
struct dmatest_params *params = &info->params;
int err = 0;
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
for (;;) {
chan = dma_request_channel(mask, filter, params);
if (chan) {
err = dmatest_add_channel(info, chan);
if (err) {
dma_release_channel(chan);
break; /* add_channel failed, punt */
}
} else
break; /* no more channels available */
if (params->max_channels &&
info->nr_channels >= params->max_channels)
break; /* we have all we need */
}
return err;
}
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
#ifndef MODULE
static int run_threaded_test(struct dmatest_info *info)
{
int ret;
mutex_lock(&info->lock);
ret = __run_threaded_test(info);
mutex_unlock(&info->lock);
return ret;
}
#endif
static void __stop_threaded_test(struct dmatest_info *info)
{
struct dmatest_chan *dtc, *_dtc;
struct dma_chan *chan;
list_for_each_entry_safe(dtc, _dtc, &info->channels, node) {
list_del(&dtc->node);
chan = dtc->chan;
dmatest_cleanup_channel(dtc);
pr_debug("dmatest: dropped channel %s\n", dma_chan_name(chan));
dma_release_channel(chan);
}
info->nr_channels = 0;
}
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
static void stop_threaded_test(struct dmatest_info *info)
{
mutex_lock(&info->lock);
__stop_threaded_test(info);
mutex_unlock(&info->lock);
}
static int __restart_threaded_test(struct dmatest_info *info, bool run)
{
struct dmatest_params *params = &info->params;
/* Stop any running test first */
__stop_threaded_test(info);
if (run == false)
return 0;
/* Clear results from previous run */
result_free(info, NULL);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
/* Copy test parameters */
memcpy(params, &info->dbgfs_params, sizeof(*params));
/* Run test with new parameters */
return __run_threaded_test(info);
}
static bool __is_threaded_test_run(struct dmatest_info *info)
{
struct dmatest_chan *dtc;
list_for_each_entry(dtc, &info->channels, node) {
struct dmatest_thread *thread;
list_for_each_entry(thread, &dtc->threads, node) {
if (!thread->done)
return true;
}
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
}
return false;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
}
static ssize_t dtf_write_string(void *to, size_t available, loff_t *ppos,
const void __user *from, size_t count)
{
char tmp[20];
ssize_t len;
len = simple_write_to_buffer(tmp, sizeof(tmp) - 1, ppos, from, count);
if (len >= 0) {
tmp[len] = '\0';
strlcpy(to, strim(tmp), available);
}
return len;
}
static ssize_t dtf_read_channel(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct dmatest_info *info = file->private_data;
return simple_read_from_buffer(buf, count, ppos,
info->dbgfs_params.channel,
strlen(info->dbgfs_params.channel));
}
static ssize_t dtf_write_channel(struct file *file, const char __user *buf,
size_t size, loff_t *ppos)
{
struct dmatest_info *info = file->private_data;
return dtf_write_string(info->dbgfs_params.channel,
sizeof(info->dbgfs_params.channel),
ppos, buf, size);
}
static const struct file_operations dtf_channel_fops = {
.read = dtf_read_channel,
.write = dtf_write_channel,
.open = simple_open,
.llseek = default_llseek,
};
static ssize_t dtf_read_device(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct dmatest_info *info = file->private_data;
return simple_read_from_buffer(buf, count, ppos,
info->dbgfs_params.device,
strlen(info->dbgfs_params.device));
}
static ssize_t dtf_write_device(struct file *file, const char __user *buf,
size_t size, loff_t *ppos)
{
struct dmatest_info *info = file->private_data;
return dtf_write_string(info->dbgfs_params.device,
sizeof(info->dbgfs_params.device),
ppos, buf, size);
}
static const struct file_operations dtf_device_fops = {
.read = dtf_read_device,
.write = dtf_write_device,
.open = simple_open,
.llseek = default_llseek,
};
static ssize_t dtf_read_run(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct dmatest_info *info = file->private_data;
char buf[3];
mutex_lock(&info->lock);
if (__is_threaded_test_run(info)) {
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
buf[0] = 'Y';
} else {
__stop_threaded_test(info);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
buf[0] = 'N';
}
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
mutex_unlock(&info->lock);
buf[1] = '\n';
buf[2] = 0x00;
return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
}
static ssize_t dtf_write_run(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct dmatest_info *info = file->private_data;
char buf[16];
bool bv;
int ret = 0;
if (copy_from_user(buf, user_buf, min(count, (sizeof(buf) - 1))))
return -EFAULT;
if (strtobool(buf, &bv) == 0) {
mutex_lock(&info->lock);
if (__is_threaded_test_run(info))
ret = -EBUSY;
else
ret = __restart_threaded_test(info, bv);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
mutex_unlock(&info->lock);
}
return ret ? ret : count;
}
static const struct file_operations dtf_run_fops = {
.read = dtf_read_run,
.write = dtf_write_run,
.open = simple_open,
.llseek = default_llseek,
};
static int dtf_results_show(struct seq_file *sf, void *data)
{
struct dmatest_info *info = sf->private;
struct dmatest_result *result;
struct dmatest_thread_result *tr;
unsigned int i;
mutex_lock(&info->results_lock);
list_for_each_entry(result, &info->results, node) {
list_for_each_entry(tr, &result->results, node) {
seq_printf(sf, "%s\n",
thread_result_get(result->name, tr));
if (tr->type == DMATEST_ET_VERIFY_BUF) {
for (i = 0; i < tr->vr->error_count; i++) {
seq_printf(sf, "\t%s\n",
verify_result_get_one(tr->vr, i));
}
}
}
}
mutex_unlock(&info->results_lock);
return 0;
}
static int dtf_results_open(struct inode *inode, struct file *file)
{
return single_open(file, dtf_results_show, inode->i_private);
}
static const struct file_operations dtf_results_fops = {
.open = dtf_results_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
static int dmatest_register_dbgfs(struct dmatest_info *info)
{
struct dentry *d;
struct dmatest_params *params = &info->dbgfs_params;
int ret = -ENOMEM;
d = debugfs_create_dir("dmatest", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
if (!d)
goto err_root;
info->root = d;
/* Copy initial values */
memcpy(params, &info->params, sizeof(*params));
/* Test parameters */
d = debugfs_create_u32("test_buf_size", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->buf_size);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_file("channel", S_IRUGO | S_IWUSR, info->root,
info, &dtf_channel_fops);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_file("device", S_IRUGO | S_IWUSR, info->root,
info, &dtf_device_fops);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_u32("threads_per_chan", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->threads_per_chan);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_u32("max_channels", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->max_channels);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_u32("iterations", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->iterations);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_u32("xor_sources", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->xor_sources);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_u32("pq_sources", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->pq_sources);
if (IS_ERR_OR_NULL(d))
goto err_node;
d = debugfs_create_u32("timeout", S_IWUSR | S_IRUGO, info->root,
(u32 *)&params->timeout);
if (IS_ERR_OR_NULL(d))
goto err_node;
/* Run or stop threaded test */
d = debugfs_create_file("run", S_IWUSR | S_IRUGO, info->root,
info, &dtf_run_fops);
if (IS_ERR_OR_NULL(d))
goto err_node;
/* Results of test in progress */
d = debugfs_create_file("results", S_IRUGO, info->root, info,
&dtf_results_fops);
if (IS_ERR_OR_NULL(d))
goto err_node;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
return 0;
err_node:
debugfs_remove_recursive(info->root);
err_root:
pr_err("dmatest: Failed to initialize debugfs\n");
return ret;
}
static int __init dmatest_init(void)
{
struct dmatest_info *info = &test_info;
struct dmatest_params *params = &info->params;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
int ret;
memset(info, 0, sizeof(*info));
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
mutex_init(&info->lock);
INIT_LIST_HEAD(&info->channels);
mutex_init(&info->results_lock);
INIT_LIST_HEAD(&info->results);
/* Set default parameters */
params->buf_size = test_buf_size;
strlcpy(params->channel, test_channel, sizeof(params->channel));
strlcpy(params->device, test_device, sizeof(params->device));
params->threads_per_chan = threads_per_chan;
params->max_channels = max_channels;
params->iterations = iterations;
params->xor_sources = xor_sources;
params->pq_sources = pq_sources;
params->timeout = timeout;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
ret = dmatest_register_dbgfs(info);
if (ret)
return ret;
#ifdef MODULE
return 0;
#else
return run_threaded_test(info);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
#endif
}
/* when compiled-in wait for drivers to load first */
late_initcall(dmatest_init);
static void __exit dmatest_exit(void)
{
struct dmatest_info *info = &test_info;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
debugfs_remove_recursive(info->root);
stop_threaded_test(info);
result_free(info, NULL);
}
module_exit(dmatest_exit);
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_LICENSE("GPL v2");