linux/drivers/gpio/gpio-stmpe.c

541 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/mfd/stmpe.h>
#include <linux/seq_file.h>
#include <linux/bitops.h>
/*
* These registers are modified under the irq bus lock and cached to avoid
* unnecessary writes in bus_sync_unlock.
*/
enum { REG_RE, REG_FE, REG_IE };
enum { LSB, CSB, MSB };
#define CACHE_NR_REGS 3
/* No variant has more than 24 GPIOs */
#define CACHE_NR_BANKS (24 / 8)
struct stmpe_gpio {
struct gpio_chip chip;
struct stmpe *stmpe;
struct device *dev;
struct mutex irq_lock;
u32 norequest_mask;
/* Caches of interrupt control registers for bus_lock */
u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
};
static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
if (ret < 0)
return ret;
return !!(ret & mask);
}
static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
u8 reg = stmpe->regs[which + (offset / 8)];
u8 mask = BIT(offset % 8);
/*
* Some variants have single register for gpio set/clear functionality.
* For them we need to write 0 to clear and 1 to set.
*/
if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
else
stmpe_reg_write(stmpe, reg, mask);
}
static int stmpe_gpio_get_direction(struct gpio_chip *chip,
unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
if (ret < 0)
return ret;
if (ret & mask)
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
}
static int stmpe_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int val)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
u8 mask = BIT(offset % 8);
stmpe_gpio_set(chip, offset, val);
return stmpe_set_bits(stmpe, reg, mask, mask);
}
static int stmpe_gpio_direction_input(struct gpio_chip *chip,
unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
u8 mask = BIT(offset % 8);
return stmpe_set_bits(stmpe, reg, mask, 0);
}
static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
if (stmpe_gpio->norequest_mask & BIT(offset))
return -EINVAL;
return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
}
static const struct gpio_chip template_chip = {
.label = "stmpe",
.owner = THIS_MODULE,
.get_direction = stmpe_gpio_get_direction,
.direction_input = stmpe_gpio_direction_input,
.get = stmpe_gpio_get,
.direction_output = stmpe_gpio_direction_output,
.set = stmpe_gpio_set,
.request = stmpe_gpio_request,
.can_sleep = true,
};
static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = BIT(offset % 8);
if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
return -EINVAL;
/* STMPE801 and STMPE 1600 don't have RE and FE registers */
if (stmpe_gpio->stmpe->partnum == STMPE801 ||
stmpe_gpio->stmpe->partnum == STMPE1600)
return 0;
if (type & IRQ_TYPE_EDGE_RISING)
stmpe_gpio->regs[REG_RE][regoffset] |= mask;
else
stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
stmpe_gpio->regs[REG_FE][regoffset] |= mask;
else
stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
return 0;
}
static void stmpe_gpio_irq_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
mutex_lock(&stmpe_gpio->irq_lock);
}
static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
struct stmpe *stmpe = stmpe_gpio->stmpe;
int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
[REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
[REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
[REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
[REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
[REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
[REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
[REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
[REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
[REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
};
int i, j;
gpio: stmpe: i2c transfer are forbiden in atomic context Move the workaround from stmpe_gpio_irq_unmask() which is executed in atomic context to stmpe_gpio_irq_sync_unlock() which is not. It fixes the following issue: [ 1.500000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28 [ 1.520000] Hardware name: STM32 (Device Tree Support) [ 1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc) [ 1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58) [ 1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2) [ 1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64) [ 1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164) [ 1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc) [ 1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe) [ 1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148) [ 1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70) [ 1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e) [ 1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a) [ 1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24) [ 1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24) [ 1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22) [ 1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78) [ 1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c) [ 1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8) [ 1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a) [ 1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a) [ 1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60) [ 1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54) [ 1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c) [ 1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe) [ 1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8) [ 1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c) [ 1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46) [ 1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124) [ 1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a) [ 1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8) [ 1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134) [ 1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c) [ 1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c) Cc: stable@vger.kernel.org Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-12 20:16:08 +08:00
/*
* STMPE1600: to be able to get IRQ from pins,
* a read must be done on GPMR register, or a write in
* GPSR or GPCR registers
*/
if (stmpe->partnum == STMPE1600) {
stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
}
for (i = 0; i < CACHE_NR_REGS; i++) {
/* STMPE801 and STMPE1600 don't have RE and FE registers */
if ((stmpe->partnum == STMPE801 ||
stmpe->partnum == STMPE1600) &&
(i != REG_IE))
continue;
for (j = 0; j < num_banks; j++) {
u8 old = stmpe_gpio->oldregs[i][j];
u8 new = stmpe_gpio->regs[i][j];
if (new == old)
continue;
stmpe_gpio->oldregs[i][j] = new;
stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
}
}
mutex_unlock(&stmpe_gpio->irq_lock);
}
static void stmpe_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
}
static void stmpe_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] |= mask;
}
static void stmpe_dbg_show_one(struct seq_file *s,
struct gpio_chip *gc,
unsigned offset, unsigned gpio)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
struct stmpe *stmpe = stmpe_gpio->stmpe;
const char *label = gpiochip_is_requested(gc, offset);
bool val = !!stmpe_gpio_get(gc, offset);
u8 bank = offset / 8;
u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
u8 mask = BIT(offset % 8);
int ret;
u8 dir;
ret = stmpe_reg_read(stmpe, dir_reg);
if (ret < 0)
return;
dir = !!(ret & mask);
if (dir) {
seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
gpio, label ?: "(none)",
val ? "hi" : "lo");
} else {
u8 edge_det_reg;
u8 rise_reg;
u8 fall_reg;
u8 irqen_reg;
static const char * const edge_det_values[] = {
"edge-inactive",
"edge-asserted",
"not-supported"
};
static const char * const rise_values[] = {
"no-rising-edge-detection",
"rising-edge-detection",
"not-supported"
};
static const char * const fall_values[] = {
"no-falling-edge-detection",
"falling-edge-detection",
"not-supported"
};
#define NOT_SUPPORTED_IDX 2
u8 edge_det = NOT_SUPPORTED_IDX;
u8 rise = NOT_SUPPORTED_IDX;
u8 fall = NOT_SUPPORTED_IDX;
bool irqen;
switch (stmpe->partnum) {
case STMPE610:
case STMPE811:
case STMPE1601:
case STMPE2401:
case STMPE2403:
edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
ret = stmpe_reg_read(stmpe, edge_det_reg);
if (ret < 0)
return;
edge_det = !!(ret & mask);
fallthrough;
case STMPE1801:
rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
ret = stmpe_reg_read(stmpe, rise_reg);
if (ret < 0)
return;
rise = !!(ret & mask);
ret = stmpe_reg_read(stmpe, fall_reg);
if (ret < 0)
return;
fall = !!(ret & mask);
fallthrough;
case STMPE801:
case STMPE1600:
irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
break;
default:
return;
}
ret = stmpe_reg_read(stmpe, irqen_reg);
if (ret < 0)
return;
irqen = !!(ret & mask);
seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s",
gpio, label ?: "(none)",
val ? "hi" : "lo",
edge_det_values[edge_det],
irqen ? "IRQ-enabled" : "IRQ-disabled",
rise_values[rise],
fall_values[fall]);
}
}
static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
{
unsigned i;
unsigned gpio = gc->base;
for (i = 0; i < gc->ngpio; i++, gpio++) {
stmpe_dbg_show_one(s, gc, i, gpio);
seq_putc(s, '\n');
}
}
static struct irq_chip stmpe_gpio_irq_chip = {
.name = "stmpe-gpio",
.irq_bus_lock = stmpe_gpio_irq_lock,
.irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock,
.irq_mask = stmpe_gpio_irq_mask,
.irq_unmask = stmpe_gpio_irq_unmask,
.irq_set_type = stmpe_gpio_irq_set_type,
};
#define MAX_GPIOS 24
static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
{
struct stmpe_gpio *stmpe_gpio = dev;
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 statmsbreg;
int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)];
int ret;
int i;
/*
* the stmpe_block_read() call below, imposes to set statmsbreg
* with the register located at the lowest address. As STMPE1600
* variant is the only one which respect registers address's order
* (LSB regs located at lowest address than MSB ones) whereas all
* the others have a registers layout with MSB located before the
* LSB regs.
*/
if (stmpe->partnum == STMPE1600)
statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
else
statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
if (ret < 0)
return IRQ_NONE;
for (i = 0; i < num_banks; i++) {
int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
num_banks - i - 1;
unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
unsigned int stat = status[i];
stat &= enabled;
if (!stat)
continue;
while (stat) {
int bit = __ffs(stat);
int line = bank * 8 + bit;
int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain,
line);
handle_nested_irq(child_irq);
stat &= ~BIT(bit);
}
/*
* interrupt status register write has no effect on
* 801/1801/1600, bits are cleared when read.
* Edge detect register is not present on 801/1600/1801
*/
if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
stmpe->partnum != STMPE1801) {
stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
stmpe_reg_write(stmpe,
stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
status[i]);
}
}
return IRQ_HANDLED;
}
static void stmpe_init_irq_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int i;
if (!stmpe_gpio->norequest_mask)
return;
/* Forbid unused lines to be mapped as IRQs */
for (i = 0; i < sizeof(u32); i++) {
if (stmpe_gpio->norequest_mask & BIT(i))
clear_bit(i, valid_mask);
}
}
static void stmpe_gpio_disable(void *stmpe)
{
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
}
static int stmpe_gpio_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
struct stmpe_gpio *stmpe_gpio;
int ret, irq;
if (stmpe->num_gpios > MAX_GPIOS) {
dev_err(&pdev->dev, "Need to increase maximum GPIO number\n");
return -EINVAL;
}
stmpe_gpio = devm_kzalloc(&pdev->dev, sizeof(*stmpe_gpio), GFP_KERNEL);
if (!stmpe_gpio)
return -ENOMEM;
mutex_init(&stmpe_gpio->irq_lock);
stmpe_gpio->dev = &pdev->dev;
stmpe_gpio->stmpe = stmpe;
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
stmpe_gpio->chip.parent = &pdev->dev;
stmpe_gpio->chip.base = -1;
if (IS_ENABLED(CONFIG_DEBUG_FS))
stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
of_property_read_u32(np, "st,norequest-mask",
&stmpe_gpio->norequest_mask);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
dev_info(&pdev->dev,
"device configured in no-irq mode: "
"irqs are not available\n");
ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
if (ret)
return ret;
ret = devm_add_action_or_reset(&pdev->dev, stmpe_gpio_disable, stmpe);
if (ret)
return ret;
if (irq > 0) {
struct gpio_irq_chip *girq;
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
stmpe_gpio_irq, IRQF_ONESHOT,
"stmpe-gpio", stmpe_gpio);
if (ret) {
dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
return ret;
}
girq = &stmpe_gpio->chip.irq;
girq->chip = &stmpe_gpio_irq_chip;
/* This will let us handle the parent IRQ in the driver */
girq->parent_handler = NULL;
girq->num_parents = 0;
girq->parents = NULL;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_simple_irq;
girq->threaded = true;
girq->init_valid_mask = stmpe_init_irq_valid_mask;
}
return devm_gpiochip_add_data(&pdev->dev, &stmpe_gpio->chip, stmpe_gpio);
}
static struct platform_driver stmpe_gpio_driver = {
.driver = {
.suppress_bind_attrs = true,
.name = "stmpe-gpio",
},
.probe = stmpe_gpio_probe,
};
static int __init stmpe_gpio_init(void)
{
return platform_driver_register(&stmpe_gpio_driver);
}
subsys_initcall(stmpe_gpio_init);