linux/arch/arm64/kvm/arm.c

2185 lines
50 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*/
#include <linux/bug.h>
#include <linux/cpu_pm.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kvm_host.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/mman.h>
#include <linux/sched.h>
#include <linux/kvm.h>
#include <linux/kvm_irqfd.h>
#include <linux/irqbypass.h>
#include <linux/sched/stat.h>
#include <linux/psci.h>
#include <trace/events/kvm.h>
#define CREATE_TRACE_POINTS
#include "trace_arm.h"
#include <linux/uaccess.h>
#include <asm/ptrace.h>
#include <asm/mman.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/cpufeature.h>
#include <asm/virt.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmu.h>
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
#include <asm/kvm_emulate.h>
#include <asm/sections.h>
#include <kvm/arm_hypercalls.h>
#include <kvm/arm_pmu.h>
#include <kvm/arm_psci.h>
#ifdef REQUIRES_VIRT
__asm__(".arch_extension virt");
#endif
static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT;
DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized);
DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
unsigned long kvm_arm_hyp_percpu_base[NR_CPUS];
DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/* The VMID used in the VTTBR */
static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
static u32 kvm_next_vmid;
static DEFINE_SPINLOCK(kvm_vmid_lock);
static bool vgic_present;
static DEFINE_PER_CPU(unsigned char, kvm_arm_hardware_enabled);
DEFINE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
{
return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
}
int kvm_arch_hardware_setup(void *opaque)
{
return 0;
}
int kvm_arch_check_processor_compat(void *opaque)
{
return 0;
}
KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace For a long time, if a guest accessed memory outside of a memslot using any of the load/store instructions in the architecture which doesn't supply decoding information in the ESR_EL2 (the ISV bit is not set), the kernel would print the following message and terminate the VM as a result of returning -ENOSYS to userspace: load/store instruction decoding not implemented The reason behind this message is that KVM assumes that all accesses outside a memslot is an MMIO access which should be handled by userspace, and we originally expected to eventually implement some sort of decoding of load/store instructions where the ISV bit was not set. However, it turns out that many of the instructions which don't provide decoding information on abort are not safe to use for MMIO accesses, and the remaining few that would potentially make sense to use on MMIO accesses, such as those with register writeback, are not used in practice. It also turns out that fetching an instruction from guest memory can be a pretty horrible affair, involving stopping all CPUs on SMP systems, handling multiple corner cases of address translation in software, and more. It doesn't appear likely that we'll ever implement this in the kernel. What is much more common is that a user has misconfigured his/her guest and is actually not accessing an MMIO region, but just hitting some random hole in the IPA space. In this scenario, the error message above is almost misleading and has led to a great deal of confusion over the years. It is, nevertheless, ABI to userspace, and we therefore need to introduce a new capability that userspace explicitly enables to change behavior. This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV) which does exactly that, and introduces a new exit reason to report the event to userspace. User space can then emulate an exception to the guest, restart the guest, suspend the guest, or take any other appropriate action as per the policy of the running system. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-11 19:07:05 +08:00
int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
struct kvm_enable_cap *cap)
{
int r;
if (cap->flags)
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_ARM_NISV_TO_USER:
r = 0;
kvm->arch.return_nisv_io_abort_to_user = true;
break;
case KVM_CAP_ARM_MTE:
if (!system_supports_mte() || kvm->created_vcpus)
return -EINVAL;
r = 0;
kvm->arch.mte_enabled = true;
break;
KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace For a long time, if a guest accessed memory outside of a memslot using any of the load/store instructions in the architecture which doesn't supply decoding information in the ESR_EL2 (the ISV bit is not set), the kernel would print the following message and terminate the VM as a result of returning -ENOSYS to userspace: load/store instruction decoding not implemented The reason behind this message is that KVM assumes that all accesses outside a memslot is an MMIO access which should be handled by userspace, and we originally expected to eventually implement some sort of decoding of load/store instructions where the ISV bit was not set. However, it turns out that many of the instructions which don't provide decoding information on abort are not safe to use for MMIO accesses, and the remaining few that would potentially make sense to use on MMIO accesses, such as those with register writeback, are not used in practice. It also turns out that fetching an instruction from guest memory can be a pretty horrible affair, involving stopping all CPUs on SMP systems, handling multiple corner cases of address translation in software, and more. It doesn't appear likely that we'll ever implement this in the kernel. What is much more common is that a user has misconfigured his/her guest and is actually not accessing an MMIO region, but just hitting some random hole in the IPA space. In this scenario, the error message above is almost misleading and has led to a great deal of confusion over the years. It is, nevertheless, ABI to userspace, and we therefore need to introduce a new capability that userspace explicitly enables to change behavior. This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV) which does exactly that, and introduces a new exit reason to report the event to userspace. User space can then emulate an exception to the guest, restart the guest, suspend the guest, or take any other appropriate action as per the policy of the running system. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-11 19:07:05 +08:00
default:
r = -EINVAL;
break;
}
return r;
}
static int kvm_arm_default_max_vcpus(void)
{
return vgic_present ? kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
}
static void set_default_spectre(struct kvm *kvm)
{
/*
* The default is to expose CSV2 == 1 if the HW isn't affected.
* Although this is a per-CPU feature, we make it global because
* asymmetric systems are just a nuisance.
*
* Userspace can override this as long as it doesn't promise
* the impossible.
*/
if (arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED)
kvm->arch.pfr0_csv2 = 1;
if (arm64_get_meltdown_state() == SPECTRE_UNAFFECTED)
kvm->arch.pfr0_csv3 = 1;
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
/**
* kvm_arch_init_vm - initializes a VM data structure
* @kvm: pointer to the KVM struct
*/
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
int ret;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
ret = kvm_arm_setup_stage2(kvm, type);
if (ret)
return ret;
ret = kvm_init_stage2_mmu(kvm, &kvm->arch.mmu);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
if (ret)
return ret;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
ret = create_hyp_mappings(kvm, kvm + 1, PAGE_HYP);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
if (ret)
goto out_free_stage2_pgd;
kvm_vgic_early_init(kvm);
/* The maximum number of VCPUs is limited by the host's GIC model */
kvm->arch.max_vcpus = kvm_arm_default_max_vcpus();
set_default_spectre(kvm);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
return ret;
out_free_stage2_pgd:
kvm_free_stage2_pgd(&kvm->arch.mmu);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
return ret;
}
vm_fault_t kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
{
return VM_FAULT_SIGBUS;
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:28:07 +08:00
/**
* kvm_arch_destroy_vm - destroy the VM data structure
* @kvm: pointer to the KVM struct
*/
void kvm_arch_destroy_vm(struct kvm *kvm)
{
int i;
bitmap_free(kvm->arch.pmu_filter);
kvm_vgic_destroy(kvm);
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
if (kvm->vcpus[i]) {
kvm_vcpu_destroy(kvm->vcpus[i]);
kvm->vcpus[i] = NULL;
}
}
atomic_set(&kvm->online_vcpus, 0);
}
int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
{
int r;
switch (ext) {
case KVM_CAP_IRQCHIP:
r = vgic_present;
break;
case KVM_CAP_IOEVENTFD:
case KVM_CAP_DEVICE_CTRL:
case KVM_CAP_USER_MEMORY:
case KVM_CAP_SYNC_MMU:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
case KVM_CAP_ONE_REG:
case KVM_CAP_ARM_PSCI:
case KVM_CAP_ARM_PSCI_0_2:
case KVM_CAP_READONLY_MEM:
case KVM_CAP_MP_STATE:
case KVM_CAP_IMMEDIATE_EXIT:
case KVM_CAP_VCPU_EVENTS:
case KVM_CAP_ARM_IRQ_LINE_LAYOUT_2:
KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace For a long time, if a guest accessed memory outside of a memslot using any of the load/store instructions in the architecture which doesn't supply decoding information in the ESR_EL2 (the ISV bit is not set), the kernel would print the following message and terminate the VM as a result of returning -ENOSYS to userspace: load/store instruction decoding not implemented The reason behind this message is that KVM assumes that all accesses outside a memslot is an MMIO access which should be handled by userspace, and we originally expected to eventually implement some sort of decoding of load/store instructions where the ISV bit was not set. However, it turns out that many of the instructions which don't provide decoding information on abort are not safe to use for MMIO accesses, and the remaining few that would potentially make sense to use on MMIO accesses, such as those with register writeback, are not used in practice. It also turns out that fetching an instruction from guest memory can be a pretty horrible affair, involving stopping all CPUs on SMP systems, handling multiple corner cases of address translation in software, and more. It doesn't appear likely that we'll ever implement this in the kernel. What is much more common is that a user has misconfigured his/her guest and is actually not accessing an MMIO region, but just hitting some random hole in the IPA space. In this scenario, the error message above is almost misleading and has led to a great deal of confusion over the years. It is, nevertheless, ABI to userspace, and we therefore need to introduce a new capability that userspace explicitly enables to change behavior. This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV) which does exactly that, and introduces a new exit reason to report the event to userspace. User space can then emulate an exception to the guest, restart the guest, suspend the guest, or take any other appropriate action as per the policy of the running system. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-11 19:07:05 +08:00
case KVM_CAP_ARM_NISV_TO_USER:
case KVM_CAP_ARM_INJECT_EXT_DABT:
case KVM_CAP_SET_GUEST_DEBUG:
case KVM_CAP_VCPU_ATTRIBUTES:
case KVM_CAP_PTP_KVM:
r = 1;
break;
case KVM_CAP_SET_GUEST_DEBUG2:
return KVM_GUESTDBG_VALID_MASK;
case KVM_CAP_ARM_SET_DEVICE_ADDR:
r = 1;
break;
case KVM_CAP_NR_VCPUS:
r = num_online_cpus();
break;
case KVM_CAP_MAX_VCPUS:
case KVM_CAP_MAX_VCPU_ID:
if (kvm)
r = kvm->arch.max_vcpus;
else
r = kvm_arm_default_max_vcpus();
break;
case KVM_CAP_MSI_DEVID:
if (!kvm)
r = -EINVAL;
else
r = kvm->arch.vgic.msis_require_devid;
break;
case KVM_CAP_ARM_USER_IRQ:
/*
* 1: EL1_VTIMER, EL1_PTIMER, and PMU.
* (bump this number if adding more devices)
*/
r = 1;
break;
case KVM_CAP_ARM_MTE:
r = system_supports_mte();
break;
case KVM_CAP_STEAL_TIME:
r = kvm_arm_pvtime_supported();
break;
case KVM_CAP_ARM_EL1_32BIT:
r = cpus_have_const_cap(ARM64_HAS_32BIT_EL1);
break;
case KVM_CAP_GUEST_DEBUG_HW_BPS:
r = get_num_brps();
break;
case KVM_CAP_GUEST_DEBUG_HW_WPS:
r = get_num_wrps();
break;
case KVM_CAP_ARM_PMU_V3:
r = kvm_arm_support_pmu_v3();
break;
case KVM_CAP_ARM_INJECT_SERROR_ESR:
r = cpus_have_const_cap(ARM64_HAS_RAS_EXTN);
break;
case KVM_CAP_ARM_VM_IPA_SIZE:
r = get_kvm_ipa_limit();
break;
case KVM_CAP_ARM_SVE:
r = system_supports_sve();
break;
case KVM_CAP_ARM_PTRAUTH_ADDRESS:
case KVM_CAP_ARM_PTRAUTH_GENERIC:
r = system_has_full_ptr_auth();
break;
default:
r = 0;
}
return r;
}
long kvm_arch_dev_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
return -EINVAL;
}
struct kvm *kvm_arch_alloc_vm(void)
{
if (!has_vhe())
return kzalloc(sizeof(struct kvm), GFP_KERNEL);
return vzalloc(sizeof(struct kvm));
}
void kvm_arch_free_vm(struct kvm *kvm)
{
if (!has_vhe())
kfree(kvm);
else
vfree(kvm);
}
int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
{
if (irqchip_in_kernel(kvm) && vgic_initialized(kvm))
return -EBUSY;
if (id >= kvm->arch.max_vcpus)
return -EINVAL;
return 0;
}
int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
{
int err;
/* Force users to call KVM_ARM_VCPU_INIT */
vcpu->arch.target = -1;
bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
vcpu->arch.mmu_page_cache.gfp_zero = __GFP_ZERO;
/* Set up the timer */
kvm_timer_vcpu_init(vcpu);
kvm_pmu_vcpu_init(vcpu);
kvm_arm_reset_debug_ptr(vcpu);
kvm_arm_pvtime_vcpu_init(&vcpu->arch);
vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
err = kvm_vgic_vcpu_init(vcpu);
if (err)
return err;
return create_hyp_mappings(vcpu, vcpu + 1, PAGE_HYP);
}
void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
{
}
void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
{
if (vcpu->arch.has_run_once && unlikely(!irqchip_in_kernel(vcpu->kvm)))
static_branch_dec(&userspace_irqchip_in_use);
kvm_mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
kvm_timer_vcpu_terminate(vcpu);
kvm_pmu_vcpu_destroy(vcpu);
kvm_arm_vcpu_destroy(vcpu);
}
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return kvm_timer_is_pending(vcpu);
}
void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
{
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-02 17:28:32 +08:00
/*
* If we're about to block (most likely because we've just hit a
* WFI), we need to sync back the state of the GIC CPU interface
* so that we have the latest PMR and group enables. This ensures
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-02 17:28:32 +08:00
* that kvm_arch_vcpu_runnable has up-to-date data to decide
* whether we have pending interrupts.
*
* For the same reason, we want to tell GICv4 that we need
* doorbells to be signalled, should an interrupt become pending.
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-02 17:28:32 +08:00
*/
preempt_disable();
kvm_vgic_vmcr_sync(vcpu);
vgic_v4_put(vcpu, true);
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-02 17:28:32 +08:00
preempt_enable();
}
void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
{
preempt_disable();
vgic_v4_load(vcpu);
preempt_enable();
}
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
struct kvm_s2_mmu *mmu;
int *last_ran;
mmu = vcpu->arch.hw_mmu;
last_ran = this_cpu_ptr(mmu->last_vcpu_ran);
/*
* We guarantee that both TLBs and I-cache are private to each
* vcpu. If detecting that a vcpu from the same VM has
* previously run on the same physical CPU, call into the
* hypervisor code to nuke the relevant contexts.
*
* We might get preempted before the vCPU actually runs, but
* over-invalidation doesn't affect correctness.
*/
if (*last_ran != vcpu->vcpu_id) {
kvm_call_hyp(__kvm_flush_cpu_context, mmu);
*last_ran = vcpu->vcpu_id;
}
vcpu->cpu = cpu;
kvm_vgic_load(vcpu);
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-17 02:30:38 +08:00
kvm_timer_vcpu_load(vcpu);
if (has_vhe())
kvm_vcpu_load_sysregs_vhe(vcpu);
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
kvm_arch_vcpu_load_fp(vcpu);
kvm_vcpu_pmu_restore_guest(vcpu);
if (kvm_arm_is_pvtime_enabled(&vcpu->arch))
kvm_make_request(KVM_REQ_RECORD_STEAL, vcpu);
if (single_task_running())
vcpu_clear_wfx_traps(vcpu);
else
vcpu_set_wfx_traps(vcpu);
KVM: arm/arm64: Context-switch ptrauth registers When pointer authentication is supported, a guest may wish to use it. This patch adds the necessary KVM infrastructure for this to work, with a semi-lazy context switch of the pointer auth state. Pointer authentication feature is only enabled when VHE is built in the kernel and present in the CPU implementation so only VHE code paths are modified. When we schedule a vcpu, we disable guest usage of pointer authentication instructions and accesses to the keys. While these are disabled, we avoid context-switching the keys. When we trap the guest trying to use pointer authentication functionality, we change to eagerly context-switching the keys, and enable the feature. The next time the vcpu is scheduled out/in, we start again. However the host key save is optimized and implemented inside ptrauth instruction/register access trap. Pointer authentication consists of address authentication and generic authentication, and CPUs in a system might have varied support for either. Where support for either feature is not uniform, it is hidden from guests via ID register emulation, as a result of the cpufeature framework in the host. Unfortunately, address authentication and generic authentication cannot be trapped separately, as the architecture provides a single EL2 trap covering both. If we wish to expose one without the other, we cannot prevent a (badly-written) guest from intermittently using a feature which is not uniformly supported (when scheduled on a physical CPU which supports the relevant feature). Hence, this patch expects both type of authentication to be present in a cpu. This switch of key is done from guest enter/exit assembly as preparation for the upcoming in-kernel pointer authentication support. Hence, these key switching routines are not implemented in C code as they may cause pointer authentication key signing error in some situations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> [Only VHE, key switch in full assembly, vcpu_has_ptrauth checks , save host key in ptrauth exception trap] Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: kvmarm@lists.cs.columbia.edu [maz: various fixups] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-23 12:42:35 +08:00
if (vcpu_has_ptrauth(vcpu))
vcpu_ptrauth_disable(vcpu);
kvm_arch_vcpu_load_debug_state_flags(vcpu);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
kvm_arch_vcpu_put_debug_state_flags(vcpu);
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
kvm_arch_vcpu_put_fp(vcpu);
if (has_vhe())
kvm_vcpu_put_sysregs_vhe(vcpu);
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-17 02:30:38 +08:00
kvm_timer_vcpu_put(vcpu);
kvm_vgic_put(vcpu);
kvm_vcpu_pmu_restore_host(vcpu);
vcpu->cpu = -1;
}
static void vcpu_power_off(struct kvm_vcpu *vcpu)
{
vcpu->arch.power_off = true;
kvm_make_request(KVM_REQ_SLEEP, vcpu);
kvm_vcpu_kick(vcpu);
}
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
if (vcpu->arch.power_off)
mp_state->mp_state = KVM_MP_STATE_STOPPED;
else
mp_state->mp_state = KVM_MP_STATE_RUNNABLE;
return 0;
}
int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
struct kvm_mp_state *mp_state)
{
int ret = 0;
switch (mp_state->mp_state) {
case KVM_MP_STATE_RUNNABLE:
vcpu->arch.power_off = false;
break;
case KVM_MP_STATE_STOPPED:
vcpu_power_off(vcpu);
break;
default:
ret = -EINVAL;
}
return ret;
}
/**
* kvm_arch_vcpu_runnable - determine if the vcpu can be scheduled
* @v: The VCPU pointer
*
* If the guest CPU is not waiting for interrupts or an interrupt line is
* asserted, the CPU is by definition runnable.
*/
int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
{
bool irq_lines = *vcpu_hcr(v) & (HCR_VI | HCR_VF);
return ((irq_lines || kvm_vgic_vcpu_pending_irq(v))
&& !v->arch.power_off && !v->arch.pause);
}
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
{
return vcpu_mode_priv(vcpu);
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/* Just ensure a guest exit from a particular CPU */
static void exit_vm_noop(void *info)
{
}
void force_vm_exit(const cpumask_t *mask)
{
preempt_disable();
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
smp_call_function_many(mask, exit_vm_noop, NULL, true);
preempt_enable();
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
}
/**
* need_new_vmid_gen - check that the VMID is still valid
* @vmid: The VMID to check
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
*
* return true if there is a new generation of VMIDs being used
*
* The hardware supports a limited set of values with the value zero reserved
* for the host, so we check if an assigned value belongs to a previous
* generation, which requires us to assign a new value. If we're the first to
* use a VMID for the new generation, we must flush necessary caches and TLBs
* on all CPUs.
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
*/
static bool need_new_vmid_gen(struct kvm_vmid *vmid)
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
{
u64 current_vmid_gen = atomic64_read(&kvm_vmid_gen);
smp_rmb(); /* Orders read of kvm_vmid_gen and kvm->arch.vmid */
return unlikely(READ_ONCE(vmid->vmid_gen) != current_vmid_gen);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
}
/**
* update_vmid - Update the vmid with a valid VMID for the current generation
* @vmid: The stage-2 VMID information struct
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
*/
static void update_vmid(struct kvm_vmid *vmid)
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
{
if (!need_new_vmid_gen(vmid))
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
return;
spin_lock(&kvm_vmid_lock);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/*
* We need to re-check the vmid_gen here to ensure that if another vcpu
* already allocated a valid vmid for this vm, then this vcpu should
* use the same vmid.
*/
if (!need_new_vmid_gen(vmid)) {
spin_unlock(&kvm_vmid_lock);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
return;
}
/* First user of a new VMID generation? */
if (unlikely(kvm_next_vmid == 0)) {
atomic64_inc(&kvm_vmid_gen);
kvm_next_vmid = 1;
/*
* On SMP we know no other CPUs can use this CPU's or each
* other's VMID after force_vm_exit returns since the
* kvm_vmid_lock blocks them from reentry to the guest.
*/
force_vm_exit(cpu_all_mask);
/*
* Now broadcast TLB + ICACHE invalidation over the inner
* shareable domain to make sure all data structures are
* clean.
*/
kvm_call_hyp(__kvm_flush_vm_context);
}
vmid->vmid = kvm_next_vmid;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
kvm_next_vmid++;
kvm_next_vmid &= (1 << kvm_get_vmid_bits()) - 1;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
smp_wmb();
WRITE_ONCE(vmid->vmid_gen, atomic64_read(&kvm_vmid_gen));
spin_unlock(&kvm_vmid_lock);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
}
static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = vcpu->kvm;
int ret = 0;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
if (likely(vcpu->arch.has_run_once))
return 0;
KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl Some aspects of vcpu configuration may be too complex to be completed inside KVM_ARM_VCPU_INIT. Thus, there may be a requirement for userspace to do some additional configuration before various other ioctls will work in a consistent way. In particular this will be the case for SVE, where userspace will need to negotiate the set of vector lengths to be made available to the guest before the vcpu becomes fully usable. In order to provide an explicit way for userspace to confirm that it has finished setting up a particular vcpu feature, this patch adds a new ioctl KVM_ARM_VCPU_FINALIZE. When userspace has opted into a feature that requires finalization, typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a matching call to KVM_ARM_VCPU_FINALIZE is now required before KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may impose additional restrictions where appropriate. No existing vcpu features are affected by this, so current userspace implementations will continue to work exactly as before, with no need to issue KVM_ARM_VCPU_FINALIZE. As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a placeholder: no finalizable features exist yet, so ioctl is not required and will always yield EINVAL. Subsequent patches will add the finalization logic to make use of this ioctl for SVE. No functional change for existing userspace. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 22:27:01 +08:00
if (!kvm_arm_vcpu_is_finalized(vcpu))
return -EPERM;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
vcpu->arch.has_run_once = true;
2021-04-07 22:48:57 +08:00
kvm_arm_vcpu_init_debug(vcpu);
if (likely(irqchip_in_kernel(kvm))) {
/*
* Map the VGIC hardware resources before running a vcpu the
* first time on this VM.
*/
ret = kvm_vgic_map_resources(kvm);
if (ret)
return ret;
} else {
/*
* Tell the rest of the code that there are userspace irqchip
* VMs in the wild.
*/
static_branch_inc(&userspace_irqchip_in_use);
}
KVM: arm/arm64: Support arch timers with a userspace gic If you're running with a userspace gic or other interrupt controller (that is no vgic in the kernel), then you have so far not been able to use the architected timers, because the output of the architected timers, which are driven inside the kernel, was a kernel-only construct between the arch timer code and the vgic. This patch implements the new KVM_CAP_ARM_USER_IRQ feature, where we use a side channel on the kvm_run structure, run->s.regs.device_irq_level, to always notify userspace of the timer output levels when using a userspace irqchip. This works by ensuring that before we enter the guest, if the timer output level has changed compared to what we last told userspace, we don't enter the guest, but instead return to userspace to notify it of the new level. If we are exiting, because of an MMIO for example, and the level changed at the same time, the value is also updated and userspace can sample the line as it needs. This is nicely achieved simply always updating the timer_irq_level field after the main run loop. Note that the kvm_timer_update_irq trace event is changed to show the host IRQ number for the timer instead of the guest IRQ number, because the kernel no longer know which IRQ userspace wires up the timer signal to. Also note that this patch implements all required functionality but does not yet advertise the capability. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-28 03:08:06 +08:00
ret = kvm_timer_enable(vcpu);
if (ret)
return ret;
ret = kvm_arm_pmu_v3_enable(vcpu);
return ret;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
}
bool kvm_arch_intc_initialized(struct kvm *kvm)
{
return vgic_initialized(kvm);
}
void kvm_arm_halt_guest(struct kvm *kvm)
{
int i;
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm)
vcpu->arch.pause = true;
kvm_make_all_cpus_request(kvm, KVM_REQ_SLEEP);
}
void kvm_arm_resume_guest(struct kvm *kvm)
{
int i;
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm) {
vcpu->arch.pause = false;
rcuwait_wake_up(kvm_arch_vcpu_get_wait(vcpu));
}
}
static void vcpu_req_sleep(struct kvm_vcpu *vcpu)
{
struct rcuwait *wait = kvm_arch_vcpu_get_wait(vcpu);
rcuwait_wait_event(wait,
(!vcpu->arch.power_off) &&(!vcpu->arch.pause),
TASK_INTERRUPTIBLE);
if (vcpu->arch.power_off || vcpu->arch.pause) {
/* Awaken to handle a signal, request we sleep again later. */
kvm_make_request(KVM_REQ_SLEEP, vcpu);
}
/*
* Make sure we will observe a potential reset request if we've
* observed a change to the power state. Pairs with the smp_wmb() in
* kvm_psci_vcpu_on().
*/
smp_rmb();
}
static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
{
return vcpu->arch.target >= 0;
}
static void check_vcpu_requests(struct kvm_vcpu *vcpu)
{
if (kvm_request_pending(vcpu)) {
if (kvm_check_request(KVM_REQ_SLEEP, vcpu))
vcpu_req_sleep(vcpu);
if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu))
kvm_reset_vcpu(vcpu);
/*
* Clear IRQ_PENDING requests that were made to guarantee
* that a VCPU sees new virtual interrupts.
*/
kvm_check_request(KVM_REQ_IRQ_PENDING, vcpu);
if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
kvm_update_stolen_time(vcpu);
if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
/* The distributor enable bits were changed */
preempt_disable();
vgic_v4_put(vcpu, false);
vgic_v4_load(vcpu);
preempt_enable();
}
if (kvm_check_request(KVM_REQ_RELOAD_PMU, vcpu))
kvm_pmu_handle_pmcr(vcpu,
__vcpu_sys_reg(vcpu, PMCR_EL0));
}
}
static bool vcpu_mode_is_bad_32bit(struct kvm_vcpu *vcpu)
{
if (likely(!vcpu_mode_is_32bit(vcpu)))
return false;
return !system_supports_32bit_el0() ||
static_branch_unlikely(&arm64_mismatched_32bit_el0);
}
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/**
* kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
* @vcpu: The VCPU pointer
*
* This function is called through the VCPU_RUN ioctl called from user space. It
* will execute VM code in a loop until the time slice for the process is used
* or some emulation is needed from user space in which case the function will
* return with return value 0 and with the kvm_run structure filled in with the
* required data for the requested emulation.
*/
int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
int ret;
if (unlikely(!kvm_vcpu_initialized(vcpu)))
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
return -ENOEXEC;
ret = kvm_vcpu_first_run_init(vcpu);
if (ret)
return ret;
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
if (run->exit_reason == KVM_EXIT_MMIO) {
ret = kvm_handle_mmio_return(vcpu);
if (ret)
return ret;
}
vcpu_load(vcpu);
if (run->immediate_exit) {
ret = -EINTR;
goto out;
}
kvm_sigset_activate(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
ret = 1;
run->exit_reason = KVM_EXIT_UNKNOWN;
while (ret > 0) {
/*
* Check conditions before entering the guest
*/
cond_resched();
update_vmid(&vcpu->arch.hw_mmu->vmid);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
check_vcpu_requests(vcpu);
/*
* Preparing the interrupts to be injected also
* involves poking the GIC, which must be done in a
* non-preemptible context.
*/
preempt_disable();
kvm_pmu_flush_hwstate(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
local_irq_disable();
kvm_vgic_flush_hwstate(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/*
* Exit if we have a signal pending so that we can deliver the
* signal to user space.
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
*/
if (signal_pending(current)) {
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
ret = -EINTR;
run->exit_reason = KVM_EXIT_INTR;
}
/*
* If we're using a userspace irqchip, then check if we need
* to tell a userspace irqchip about timer or PMU level
* changes and if so, exit to userspace (the actual level
* state gets updated in kvm_timer_update_run and
* kvm_pmu_update_run below).
*/
if (static_branch_unlikely(&userspace_irqchip_in_use)) {
if (kvm_timer_should_notify_user(vcpu) ||
kvm_pmu_should_notify_user(vcpu)) {
ret = -EINTR;
run->exit_reason = KVM_EXIT_INTR;
}
}
/*
* Ensure we set mode to IN_GUEST_MODE after we disable
* interrupts and before the final VCPU requests check.
* See the comment in kvm_vcpu_exiting_guest_mode() and
* Documentation/virt/kvm/vcpu-requests.rst
*/
smp_store_mb(vcpu->mode, IN_GUEST_MODE);
if (ret <= 0 || need_new_vmid_gen(&vcpu->arch.hw_mmu->vmid) ||
kvm_request_pending(vcpu)) {
vcpu->mode = OUTSIDE_GUEST_MODE;
isb(); /* Ensure work in x_flush_hwstate is committed */
kvm_pmu_sync_hwstate(vcpu);
if (static_branch_unlikely(&userspace_irqchip_in_use))
kvm_timer_sync_user(vcpu);
kvm_vgic_sync_hwstate(vcpu);
local_irq_enable();
preempt_enable();
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
continue;
}
kvm_arm_setup_debug(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/**************************************************************
* Enter the guest
*/
trace_kvm_entry(*vcpu_pc(vcpu));
guest_enter_irqoff();
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
vcpu->mode = OUTSIDE_GUEST_MODE;
vcpu->stat.exits++;
/*
* Back from guest
*************************************************************/
kvm_arm_clear_debug(vcpu);
/*
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-17 02:30:38 +08:00
* We must sync the PMU state before the vgic state so
* that the vgic can properly sample the updated state of the
* interrupt line.
*/
kvm_pmu_sync_hwstate(vcpu);
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-17 02:30:38 +08:00
/*
* Sync the vgic state before syncing the timer state because
* the timer code needs to know if the virtual timer
* interrupts are active.
*/
kvm_vgic_sync_hwstate(vcpu);
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-17 02:30:38 +08:00
/*
* Sync the timer hardware state before enabling interrupts as
* we don't want vtimer interrupts to race with syncing the
* timer virtual interrupt state.
*/
if (static_branch_unlikely(&userspace_irqchip_in_use))
kvm_timer_sync_user(vcpu);
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-17 02:30:38 +08:00
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
kvm_arch_vcpu_ctxsync_fp(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
/*
* We may have taken a host interrupt in HYP mode (ie
* while executing the guest). This interrupt is still
* pending, as we haven't serviced it yet!
*
* We're now back in SVC mode, with interrupts
* disabled. Enabling the interrupts now will have
* the effect of taking the interrupt again, in SVC
* mode this time.
*/
local_irq_enable();
/*
* We do local_irq_enable() before calling guest_exit() so
* that if a timer interrupt hits while running the guest we
* account that tick as being spent in the guest. We enable
* preemption after calling guest_exit() so that if we get
* preempted we make sure ticks after that is not counted as
* guest time.
*/
guest_exit();
trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
/* Exit types that need handling before we can be preempted */
handle_exit_early(vcpu, ret);
preempt_enable();
/*
* The ARMv8 architecture doesn't give the hypervisor
* a mechanism to prevent a guest from dropping to AArch32 EL0
* if implemented by the CPU. If we spot the guest in such
* state and that we decided it wasn't supposed to do so (like
* with the asymmetric AArch32 case), return to userspace with
* a fatal error.
*/
if (vcpu_mode_is_bad_32bit(vcpu)) {
/*
* As we have caught the guest red-handed, decide that
* it isn't fit for purpose anymore by making the vcpu
* invalid. The VMM can try and fix it by issuing a
* KVM_ARM_VCPU_INIT if it really wants to.
*/
vcpu->arch.target = -1;
ret = ARM_EXCEPTION_IL;
}
ret = handle_exit(vcpu, ret);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
}
KVM: arm/arm64: Support arch timers with a userspace gic If you're running with a userspace gic or other interrupt controller (that is no vgic in the kernel), then you have so far not been able to use the architected timers, because the output of the architected timers, which are driven inside the kernel, was a kernel-only construct between the arch timer code and the vgic. This patch implements the new KVM_CAP_ARM_USER_IRQ feature, where we use a side channel on the kvm_run structure, run->s.regs.device_irq_level, to always notify userspace of the timer output levels when using a userspace irqchip. This works by ensuring that before we enter the guest, if the timer output level has changed compared to what we last told userspace, we don't enter the guest, but instead return to userspace to notify it of the new level. If we are exiting, because of an MMIO for example, and the level changed at the same time, the value is also updated and userspace can sample the line as it needs. This is nicely achieved simply always updating the timer_irq_level field after the main run loop. Note that the kvm_timer_update_irq trace event is changed to show the host IRQ number for the timer instead of the guest IRQ number, because the kernel no longer know which IRQ userspace wires up the timer signal to. Also note that this patch implements all required functionality but does not yet advertise the capability. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-28 03:08:06 +08:00
/* Tell userspace about in-kernel device output levels */
if (unlikely(!irqchip_in_kernel(vcpu->kvm))) {
kvm_timer_update_run(vcpu);
kvm_pmu_update_run(vcpu);
}
KVM: arm/arm64: Support arch timers with a userspace gic If you're running with a userspace gic or other interrupt controller (that is no vgic in the kernel), then you have so far not been able to use the architected timers, because the output of the architected timers, which are driven inside the kernel, was a kernel-only construct between the arch timer code and the vgic. This patch implements the new KVM_CAP_ARM_USER_IRQ feature, where we use a side channel on the kvm_run structure, run->s.regs.device_irq_level, to always notify userspace of the timer output levels when using a userspace irqchip. This works by ensuring that before we enter the guest, if the timer output level has changed compared to what we last told userspace, we don't enter the guest, but instead return to userspace to notify it of the new level. If we are exiting, because of an MMIO for example, and the level changed at the same time, the value is also updated and userspace can sample the line as it needs. This is nicely achieved simply always updating the timer_irq_level field after the main run loop. Note that the kvm_timer_update_irq trace event is changed to show the host IRQ number for the timer instead of the guest IRQ number, because the kernel no longer know which IRQ userspace wires up the timer signal to. Also note that this patch implements all required functionality but does not yet advertise the capability. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-28 03:08:06 +08:00
kvm_sigset_deactivate(vcpu);
out:
/*
* In the unlikely event that we are returning to userspace
* with pending exceptions or PC adjustment, commit these
* adjustments in order to give userspace a consistent view of
* the vcpu state. Note that this relies on __kvm_adjust_pc()
* being preempt-safe on VHE.
*/
if (unlikely(vcpu->arch.flags & (KVM_ARM64_PENDING_EXCEPTION |
KVM_ARM64_INCREMENT_PC)))
kvm_call_hyp(__kvm_adjust_pc, vcpu);
vcpu_put(vcpu);
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 07:47:42 +08:00
return ret;
}
static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level)
{
int bit_index;
bool set;
unsigned long *hcr;
if (number == KVM_ARM_IRQ_CPU_IRQ)
bit_index = __ffs(HCR_VI);
else /* KVM_ARM_IRQ_CPU_FIQ */
bit_index = __ffs(HCR_VF);
hcr = vcpu_hcr(vcpu);
if (level)
set = test_and_set_bit(bit_index, hcr);
else
set = test_and_clear_bit(bit_index, hcr);
/*
* If we didn't change anything, no need to wake up or kick other CPUs
*/
if (set == level)
return 0;
/*
* The vcpu irq_lines field was updated, wake up sleeping VCPUs and
* trigger a world-switch round on the running physical CPU to set the
* virtual IRQ/FIQ fields in the HCR appropriately.
*/
kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
kvm_vcpu_kick(vcpu);
return 0;
}
int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
bool line_status)
{
u32 irq = irq_level->irq;
unsigned int irq_type, vcpu_idx, irq_num;
int nrcpus = atomic_read(&kvm->online_vcpus);
struct kvm_vcpu *vcpu = NULL;
bool level = irq_level->level;
irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK;
vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
vcpu_idx += ((irq >> KVM_ARM_IRQ_VCPU2_SHIFT) & KVM_ARM_IRQ_VCPU2_MASK) * (KVM_ARM_IRQ_VCPU_MASK + 1);
irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK;
trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level);
switch (irq_type) {
case KVM_ARM_IRQ_TYPE_CPU:
if (irqchip_in_kernel(kvm))
return -ENXIO;
if (vcpu_idx >= nrcpus)
return -EINVAL;
vcpu = kvm_get_vcpu(kvm, vcpu_idx);
if (!vcpu)
return -EINVAL;
if (irq_num > KVM_ARM_IRQ_CPU_FIQ)
return -EINVAL;
return vcpu_interrupt_line(vcpu, irq_num, level);
case KVM_ARM_IRQ_TYPE_PPI:
if (!irqchip_in_kernel(kvm))
return -ENXIO;
if (vcpu_idx >= nrcpus)
return -EINVAL;
vcpu = kvm_get_vcpu(kvm, vcpu_idx);
if (!vcpu)
return -EINVAL;
if (irq_num < VGIC_NR_SGIS || irq_num >= VGIC_NR_PRIVATE_IRQS)
return -EINVAL;
return kvm_vgic_inject_irq(kvm, vcpu->vcpu_id, irq_num, level, NULL);
case KVM_ARM_IRQ_TYPE_SPI:
if (!irqchip_in_kernel(kvm))
return -ENXIO;
KVM: arm/arm64: check IRQ number on userland injection When userland injects a SPI via the KVM_IRQ_LINE ioctl we currently only check it against a fixed limit, which historically is set to 127. With the new dynamic IRQ allocation the effective limit may actually be smaller (64). So when now a malicious or buggy userland injects a SPI in that range, we spill over on our VGIC bitmaps and bytemaps memory. I could trigger a host kernel NULL pointer dereference with current mainline by injecting some bogus IRQ number from a hacked kvmtool: ----------------- .... DEBUG: kvm_vgic_inject_irq(kvm, cpu=0, irq=114, level=1) DEBUG: vgic_update_irq_pending(kvm, cpu=0, irq=114, level=1) DEBUG: IRQ #114 still in the game, writing to bytemap now... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc07652e000 [00000000] *pgd=00000000f658b003, *pud=00000000f658b003, *pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1053 Comm: lkvm-msi-irqinj Not tainted 4.0.0-rc7+ #3027 Hardware name: FVP Base (DT) task: ffffffc0774e9680 ti: ffffffc0765a8000 task.ti: ffffffc0765a8000 PC is at kvm_vgic_inject_irq+0x234/0x310 LR is at kvm_vgic_inject_irq+0x30c/0x310 pc : [<ffffffc0000ae0a8>] lr : [<ffffffc0000ae180>] pstate: 80000145 ..... So this patch fixes this by checking the SPI number against the actual limit. Also we remove the former legacy hard limit of 127 in the ioctl code. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> CC: <stable@vger.kernel.org> # 4.0, 3.19, 3.18 [maz: wrap KVM_ARM_IRQ_GIC_MAX with #ifndef __KERNEL__, as suggested by Christopher Covington] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-04-10 23:17:59 +08:00
if (irq_num < VGIC_NR_PRIVATE_IRQS)
return -EINVAL;
return kvm_vgic_inject_irq(kvm, 0, irq_num, level, NULL);
}
return -EINVAL;
}
static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
const struct kvm_vcpu_init *init)
{
unsigned int i, ret;
int phys_target = kvm_target_cpu();
if (init->target != phys_target)
return -EINVAL;
/*
* Secondary and subsequent calls to KVM_ARM_VCPU_INIT must
* use the same target.
*/
if (vcpu->arch.target != -1 && vcpu->arch.target != init->target)
return -EINVAL;
/* -ENOENT for unknown features, -EINVAL for invalid combinations. */
for (i = 0; i < sizeof(init->features) * 8; i++) {
bool set = (init->features[i / 32] & (1 << (i % 32)));
if (set && i >= KVM_VCPU_MAX_FEATURES)
return -ENOENT;
/*
* Secondary and subsequent calls to KVM_ARM_VCPU_INIT must
* use the same feature set.
*/
if (vcpu->arch.target != -1 && i < KVM_VCPU_MAX_FEATURES &&
test_bit(i, vcpu->arch.features) != set)
return -EINVAL;
if (set)
set_bit(i, vcpu->arch.features);
}
vcpu->arch.target = phys_target;
/* Now we know what it is, we can reset it. */
ret = kvm_reset_vcpu(vcpu);
if (ret) {
vcpu->arch.target = -1;
bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
}
return ret;
}
static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
struct kvm_vcpu_init *init)
{
int ret;
ret = kvm_vcpu_set_target(vcpu, init);
if (ret)
return ret;
/*
* Ensure a rebooted VM will fault in RAM pages and detect if the
* guest MMU is turned off and flush the caches as needed.
*
* S2FWB enforces all memory accesses to RAM being cacheable,
* ensuring that the data side is always coherent. We still
* need to invalidate the I-cache though, as FWB does *not*
* imply CTR_EL0.DIC.
*/
if (vcpu->arch.has_run_once) {
if (!cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
stage2_unmap_vm(vcpu->kvm);
else
arm64: Rename arm64-internal cache maintenance functions Although naming across the codebase isn't that consistent, it tends to follow certain patterns. Moreover, the term "flush" isn't defined in the Arm Architecture reference manual, and might be interpreted to mean clean, invalidate, or both for a cache. Rename arm64-internal functions to make the naming internally consistent, as well as making it consistent with the Arm ARM, by specifying whether it applies to the instruction, data, or both caches, whether the operation is a clean, invalidate, or both. Also specify which point the operation applies to, i.e., to the point of unification (PoU), coherency (PoC), or persistence (PoP). This commit applies the following sed transformation to all files under arch/arm64: "s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\ "s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\ "s/\binvalidate_icache_range\b/icache_inval_pou/g;"\ "s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\ "s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\ "s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\ "s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\ "s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\ "s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\ "s/\b__flush_icache_all\b/icache_inval_all_pou/g;" Note that __clean_dcache_area_poc is deliberately missing a word boundary check at the beginning in order to match the efistub symbols in image-vars.h. Also note that, despite its name, __flush_icache_range operates on both instruction and data caches. The name change here reflects that. No functional change intended. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com Signed-off-by: Will Deacon <will@kernel.org>
2021-05-24 16:30:01 +08:00
icache_inval_all_pou();
}
vcpu_reset_hcr(vcpu);
/*
* Handle the "start in power-off" case.
*/
if (test_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features))
vcpu_power_off(vcpu);
else
vcpu->arch.power_off = false;
return 0;
}
static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr)
{
int ret = -ENXIO;
switch (attr->group) {
default:
ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr);
break;
}
return ret;
}
static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr)
{
int ret = -ENXIO;
switch (attr->group) {
default:
ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr);
break;
}
return ret;
}
static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr)
{
int ret = -ENXIO;
switch (attr->group) {
default:
ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr);
break;
}
return ret;
}
static int kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events)
{
memset(events, 0, sizeof(*events));
return __kvm_arm_vcpu_get_events(vcpu, events);
}
static int kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events)
{
int i;
/* check whether the reserved field is zero */
for (i = 0; i < ARRAY_SIZE(events->reserved); i++)
if (events->reserved[i])
return -EINVAL;
/* check whether the pad field is zero */
for (i = 0; i < ARRAY_SIZE(events->exception.pad); i++)
if (events->exception.pad[i])
return -EINVAL;
return __kvm_arm_vcpu_set_events(vcpu, events);
}
long kvm_arch_vcpu_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
struct kvm_vcpu *vcpu = filp->private_data;
void __user *argp = (void __user *)arg;
struct kvm_device_attr attr;
long r;
switch (ioctl) {
case KVM_ARM_VCPU_INIT: {
struct kvm_vcpu_init init;
r = -EFAULT;
if (copy_from_user(&init, argp, sizeof(init)))
break;
r = kvm_arch_vcpu_ioctl_vcpu_init(vcpu, &init);
break;
}
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
r = -ENOEXEC;
if (unlikely(!kvm_vcpu_initialized(vcpu)))
break;
r = -EFAULT;
if (copy_from_user(&reg, argp, sizeof(reg)))
break;
if (ioctl == KVM_SET_ONE_REG)
r = kvm_arm_set_reg(vcpu, &reg);
else
r = kvm_arm_get_reg(vcpu, &reg);
break;
}
case KVM_GET_REG_LIST: {
struct kvm_reg_list __user *user_list = argp;
struct kvm_reg_list reg_list;
unsigned n;
r = -ENOEXEC;
if (unlikely(!kvm_vcpu_initialized(vcpu)))
break;
KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl Some aspects of vcpu configuration may be too complex to be completed inside KVM_ARM_VCPU_INIT. Thus, there may be a requirement for userspace to do some additional configuration before various other ioctls will work in a consistent way. In particular this will be the case for SVE, where userspace will need to negotiate the set of vector lengths to be made available to the guest before the vcpu becomes fully usable. In order to provide an explicit way for userspace to confirm that it has finished setting up a particular vcpu feature, this patch adds a new ioctl KVM_ARM_VCPU_FINALIZE. When userspace has opted into a feature that requires finalization, typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a matching call to KVM_ARM_VCPU_FINALIZE is now required before KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may impose additional restrictions where appropriate. No existing vcpu features are affected by this, so current userspace implementations will continue to work exactly as before, with no need to issue KVM_ARM_VCPU_FINALIZE. As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a placeholder: no finalizable features exist yet, so ioctl is not required and will always yield EINVAL. Subsequent patches will add the finalization logic to make use of this ioctl for SVE. No functional change for existing userspace. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 22:27:01 +08:00
r = -EPERM;
if (!kvm_arm_vcpu_is_finalized(vcpu))
break;
r = -EFAULT;
if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
break;
n = reg_list.n;
reg_list.n = kvm_arm_num_regs(vcpu);
if (copy_to_user(user_list, &reg_list, sizeof(reg_list)))
break;
r = -E2BIG;
if (n < reg_list.n)
break;
r = kvm_arm_copy_reg_indices(vcpu, user_list->reg);
break;
}
case KVM_SET_DEVICE_ATTR: {
r = -EFAULT;
if (copy_from_user(&attr, argp, sizeof(attr)))
break;
r = kvm_arm_vcpu_set_attr(vcpu, &attr);
break;
}
case KVM_GET_DEVICE_ATTR: {
r = -EFAULT;
if (copy_from_user(&attr, argp, sizeof(attr)))
break;
r = kvm_arm_vcpu_get_attr(vcpu, &attr);
break;
}
case KVM_HAS_DEVICE_ATTR: {
r = -EFAULT;
if (copy_from_user(&attr, argp, sizeof(attr)))
break;
r = kvm_arm_vcpu_has_attr(vcpu, &attr);
break;
}
case KVM_GET_VCPU_EVENTS: {
struct kvm_vcpu_events events;
if (kvm_arm_vcpu_get_events(vcpu, &events))
return -EINVAL;
if (copy_to_user(argp, &events, sizeof(events)))
return -EFAULT;
return 0;
}
case KVM_SET_VCPU_EVENTS: {
struct kvm_vcpu_events events;
if (copy_from_user(&events, argp, sizeof(events)))
return -EFAULT;
return kvm_arm_vcpu_set_events(vcpu, &events);
}
KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl Some aspects of vcpu configuration may be too complex to be completed inside KVM_ARM_VCPU_INIT. Thus, there may be a requirement for userspace to do some additional configuration before various other ioctls will work in a consistent way. In particular this will be the case for SVE, where userspace will need to negotiate the set of vector lengths to be made available to the guest before the vcpu becomes fully usable. In order to provide an explicit way for userspace to confirm that it has finished setting up a particular vcpu feature, this patch adds a new ioctl KVM_ARM_VCPU_FINALIZE. When userspace has opted into a feature that requires finalization, typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a matching call to KVM_ARM_VCPU_FINALIZE is now required before KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may impose additional restrictions where appropriate. No existing vcpu features are affected by this, so current userspace implementations will continue to work exactly as before, with no need to issue KVM_ARM_VCPU_FINALIZE. As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a placeholder: no finalizable features exist yet, so ioctl is not required and will always yield EINVAL. Subsequent patches will add the finalization logic to make use of this ioctl for SVE. No functional change for existing userspace. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 22:27:01 +08:00
case KVM_ARM_VCPU_FINALIZE: {
int what;
if (!kvm_vcpu_initialized(vcpu))
return -ENOEXEC;
if (get_user(what, (const int __user *)argp))
return -EFAULT;
return kvm_arm_vcpu_finalize(vcpu, what);
}
default:
r = -EINVAL;
}
return r;
}
void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
{
}
void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm,
const struct kvm_memory_slot *memslot)
{
kvm_flush_remote_tlbs(kvm);
}
static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
struct kvm_arm_device_addr *dev_addr)
{
unsigned long dev_id, type;
dev_id = (dev_addr->id & KVM_ARM_DEVICE_ID_MASK) >>
KVM_ARM_DEVICE_ID_SHIFT;
type = (dev_addr->id & KVM_ARM_DEVICE_TYPE_MASK) >>
KVM_ARM_DEVICE_TYPE_SHIFT;
switch (dev_id) {
case KVM_ARM_DEVICE_VGIC_V2:
if (!vgic_present)
return -ENXIO;
return kvm_vgic_addr(kvm, type, &dev_addr->addr, true);
default:
return -ENODEV;
}
}
long kvm_arch_vm_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
struct kvm *kvm = filp->private_data;
void __user *argp = (void __user *)arg;
switch (ioctl) {
case KVM_CREATE_IRQCHIP: {
int ret;
if (!vgic_present)
return -ENXIO;
mutex_lock(&kvm->lock);
ret = kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
mutex_unlock(&kvm->lock);
return ret;
}
case KVM_ARM_SET_DEVICE_ADDR: {
struct kvm_arm_device_addr dev_addr;
if (copy_from_user(&dev_addr, argp, sizeof(dev_addr)))
return -EFAULT;
return kvm_vm_ioctl_set_device_addr(kvm, &dev_addr);
}
case KVM_ARM_PREFERRED_TARGET: {
int err;
struct kvm_vcpu_init init;
err = kvm_vcpu_preferred_target(&init);
if (err)
return err;
if (copy_to_user(argp, &init, sizeof(init)))
return -EFAULT;
return 0;
}
case KVM_ARM_MTE_COPY_TAGS: {
struct kvm_arm_copy_mte_tags copy_tags;
if (copy_from_user(&copy_tags, argp, sizeof(copy_tags)))
return -EFAULT;
return kvm_vm_ioctl_mte_copy_tags(kvm, &copy_tags);
}
default:
return -EINVAL;
}
}
static unsigned long nvhe_percpu_size(void)
{
return (unsigned long)CHOOSE_NVHE_SYM(__per_cpu_end) -
(unsigned long)CHOOSE_NVHE_SYM(__per_cpu_start);
}
static unsigned long nvhe_percpu_order(void)
{
unsigned long size = nvhe_percpu_size();
return size ? get_order(size) : 0;
}
/* A lookup table holding the hypervisor VA for each vector slot */
static void *hyp_spectre_vector_selector[BP_HARDEN_EL2_SLOTS];
static void kvm_init_vector_slot(void *base, enum arm64_hyp_spectre_vector slot)
{
hyp_spectre_vector_selector[slot] = __kvm_vector_slot2addr(base, slot);
}
static int kvm_init_vector_slots(void)
{
int err;
void *base;
base = kern_hyp_va(kvm_ksym_ref(__kvm_hyp_vector));
kvm_init_vector_slot(base, HYP_VECTOR_DIRECT);
base = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs));
kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_DIRECT);
if (!cpus_have_const_cap(ARM64_SPECTRE_V3A))
return 0;
if (!has_vhe()) {
err = create_hyp_exec_mappings(__pa_symbol(__bp_harden_hyp_vecs),
__BP_HARDEN_HYP_VECS_SZ, &base);
if (err)
return err;
}
kvm_init_vector_slot(base, HYP_VECTOR_INDIRECT);
kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_INDIRECT);
return 0;
}
static void cpu_prepare_hyp_mode(int cpu)
{
struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
unsigned long tcr;
/*
* Calculate the raw per-cpu offset without a translation from the
* kernel's mapping to the linear mapping, and store it in tpidr_el2
* so that we can use adr_l to access per-cpu variables in EL2.
* Also drop the KASAN tag which gets in the way...
*/
params->tpidr_el2 = (unsigned long)kasan_reset_tag(per_cpu_ptr_nvhe_sym(__per_cpu_start, cpu)) -
(unsigned long)kvm_ksym_ref(CHOOSE_NVHE_SYM(__per_cpu_start));
params->mair_el2 = read_sysreg(mair_el1);
/*
* The ID map may be configured to use an extended virtual address
* range. This is only the case if system RAM is out of range for the
* currently configured page size and VA_BITS, in which case we will
* also need the extended virtual range for the HYP ID map, or we won't
* be able to enable the EL2 MMU.
*
* However, at EL2, there is only one TTBR register, and we can't switch
* between translation tables *and* update TCR_EL2.T0SZ at the same
* time. Bottom line: we need to use the extended range with *both* our
* translation tables.
*
* So use the same T0SZ value we use for the ID map.
*/
tcr = (read_sysreg(tcr_el1) & TCR_EL2_MASK) | TCR_EL2_RES1;
tcr &= ~TCR_T0SZ_MASK;
tcr |= (idmap_t0sz & GENMASK(TCR_TxSZ_WIDTH - 1, 0)) << TCR_T0SZ_OFFSET;
params->tcr_el2 = tcr;
params->stack_hyp_va = kern_hyp_va(per_cpu(kvm_arm_hyp_stack_page, cpu) + PAGE_SIZE);
params->pgd_pa = kvm_mmu_get_httbr();
if (is_protected_kvm_enabled())
params->hcr_el2 = HCR_HOST_NVHE_PROTECTED_FLAGS;
else
params->hcr_el2 = HCR_HOST_NVHE_FLAGS;
params->vttbr = params->vtcr = 0;
/*
* Flush the init params from the data cache because the struct will
* be read while the MMU is off.
*/
kvm_flush_dcache_to_poc(params, sizeof(*params));
}
static void hyp_install_host_vector(void)
{
struct kvm_nvhe_init_params *params;
struct arm_smccc_res res;
/* Switch from the HYP stub to our own HYP init vector */
__hyp_set_vectors(kvm_get_idmap_vector());
/*
* Call initialization code, and switch to the full blown HYP code.
* If the cpucaps haven't been finalized yet, something has gone very
* wrong, and hyp will crash and burn when it uses any
* cpus_have_const_cap() wrapper.
*/
BUG_ON(!system_capabilities_finalized());
params = this_cpu_ptr_nvhe_sym(kvm_init_params);
arm_smccc_1_1_hvc(KVM_HOST_SMCCC_FUNC(__kvm_hyp_init), virt_to_phys(params), &res);
WARN_ON(res.a0 != SMCCC_RET_SUCCESS);
}
static void cpu_init_hyp_mode(void)
{
hyp_install_host_vector();
/*
* Disabling SSBD on a non-VHE system requires us to enable SSBS
* at EL2.
*/
if (this_cpu_has_cap(ARM64_SSBS) &&
arm64_get_spectre_v4_state() == SPECTRE_VULNERABLE) {
kvm_call_hyp_nvhe(__kvm_enable_ssbs);
}
}
static void cpu_hyp_reset(void)
{
if (!is_kernel_in_hyp_mode())
__hyp_reset_vectors();
}
/*
* EL2 vectors can be mapped and rerouted in a number of ways,
* depending on the kernel configuration and CPU present:
*
* - If the CPU is affected by Spectre-v2, the hardening sequence is
* placed in one of the vector slots, which is executed before jumping
* to the real vectors.
*
* - If the CPU also has the ARM64_SPECTRE_V3A cap, the slot
* containing the hardening sequence is mapped next to the idmap page,
* and executed before jumping to the real vectors.
*
* - If the CPU only has the ARM64_SPECTRE_V3A cap, then an
* empty slot is selected, mapped next to the idmap page, and
* executed before jumping to the real vectors.
*
* Note that ARM64_SPECTRE_V3A is somewhat incompatible with
* VHE, as we don't have hypervisor-specific mappings. If the system
* is VHE and yet selects this capability, it will be ignored.
*/
static void cpu_set_hyp_vector(void)
{
struct bp_hardening_data *data = this_cpu_ptr(&bp_hardening_data);
void *vector = hyp_spectre_vector_selector[data->slot];
if (!is_protected_kvm_enabled())
*this_cpu_ptr_hyp_sym(kvm_hyp_vector) = (unsigned long)vector;
else
kvm_call_hyp_nvhe(__pkvm_cpu_set_vector, data->slot);
}
static void cpu_hyp_reinit(void)
{
kvm_init_host_cpu_context(&this_cpu_ptr_hyp_sym(kvm_host_data)->host_ctxt);
cpu_hyp_reset();
if (is_kernel_in_hyp_mode())
kvm_timer_init_vhe();
else
cpu_init_hyp_mode();
cpu_set_hyp_vector();
kvm_arm_init_debug();
if (vgic_present)
kvm_vgic_init_cpu_hardware();
}
static void _kvm_arch_hardware_enable(void *discard)
{
if (!__this_cpu_read(kvm_arm_hardware_enabled)) {
cpu_hyp_reinit();
__this_cpu_write(kvm_arm_hardware_enabled, 1);
}
}
int kvm_arch_hardware_enable(void)
{
_kvm_arch_hardware_enable(NULL);
return 0;
}
static void _kvm_arch_hardware_disable(void *discard)
{
if (__this_cpu_read(kvm_arm_hardware_enabled)) {
cpu_hyp_reset();
__this_cpu_write(kvm_arm_hardware_enabled, 0);
}
}
void kvm_arch_hardware_disable(void)
{
if (!is_protected_kvm_enabled())
_kvm_arch_hardware_disable(NULL);
}
#ifdef CONFIG_CPU_PM
static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
unsigned long cmd,
void *v)
{
/*
* kvm_arm_hardware_enabled is left with its old value over
* PM_ENTER->PM_EXIT. It is used to indicate PM_EXIT should
* re-enable hyp.
*/
switch (cmd) {
case CPU_PM_ENTER:
if (__this_cpu_read(kvm_arm_hardware_enabled))
/*
* don't update kvm_arm_hardware_enabled here
* so that the hardware will be re-enabled
* when we resume. See below.
*/
cpu_hyp_reset();
return NOTIFY_OK;
case CPU_PM_ENTER_FAILED:
case CPU_PM_EXIT:
if (__this_cpu_read(kvm_arm_hardware_enabled))
/* The hardware was enabled before suspend. */
cpu_hyp_reinit();
return NOTIFY_OK;
default:
return NOTIFY_DONE;
}
}
static struct notifier_block hyp_init_cpu_pm_nb = {
.notifier_call = hyp_init_cpu_pm_notifier,
};
static void hyp_cpu_pm_init(void)
{
if (!is_protected_kvm_enabled())
cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
}
static void hyp_cpu_pm_exit(void)
{
if (!is_protected_kvm_enabled())
cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
}
#else
static inline void hyp_cpu_pm_init(void)
{
}
static inline void hyp_cpu_pm_exit(void)
{
}
#endif
static void init_cpu_logical_map(void)
{
unsigned int cpu;
/*
* Copy the MPIDR <-> logical CPU ID mapping to hyp.
* Only copy the set of online CPUs whose features have been chacked
* against the finalized system capabilities. The hypervisor will not
* allow any other CPUs from the `possible` set to boot.
*/
for_each_online_cpu(cpu)
hyp_cpu_logical_map[cpu] = cpu_logical_map(cpu);
}
#define init_psci_0_1_impl_state(config, what) \
config.psci_0_1_ ## what ## _implemented = psci_ops.what
static bool init_psci_relay(void)
{
/*
* If PSCI has not been initialized, protected KVM cannot install
* itself on newly booted CPUs.
*/
if (!psci_ops.get_version) {
kvm_err("Cannot initialize protected mode without PSCI\n");
return false;
}
kvm_host_psci_config.version = psci_ops.get_version();
if (kvm_host_psci_config.version == PSCI_VERSION(0, 1)) {
kvm_host_psci_config.function_ids_0_1 = get_psci_0_1_function_ids();
init_psci_0_1_impl_state(kvm_host_psci_config, cpu_suspend);
init_psci_0_1_impl_state(kvm_host_psci_config, cpu_on);
init_psci_0_1_impl_state(kvm_host_psci_config, cpu_off);
init_psci_0_1_impl_state(kvm_host_psci_config, migrate);
}
return true;
}
static int init_subsystems(void)
{
int err = 0;
/*
* Enable hardware so that subsystem initialisation can access EL2.
*/
on_each_cpu(_kvm_arch_hardware_enable, NULL, 1);
/*
* Register CPU lower-power notifier
*/
hyp_cpu_pm_init();
/*
* Init HYP view of VGIC
*/
err = kvm_vgic_hyp_init();
switch (err) {
case 0:
vgic_present = true;
break;
case -ENODEV:
case -ENXIO:
vgic_present = false;
err = 0;
break;
default:
goto out;
}
/*
* Init HYP architected timer support
*/
err = kvm_timer_hyp_init(vgic_present);
if (err)
goto out;
kvm_perf_init();
kvm_sys_reg_table_init();
out:
if (err || !is_protected_kvm_enabled())
on_each_cpu(_kvm_arch_hardware_disable, NULL, 1);
return err;
}
static void teardown_hyp_mode(void)
{
int cpu;
free_hyp_pgds();
for_each_possible_cpu(cpu) {
free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
free_pages(kvm_arm_hyp_percpu_base[cpu], nvhe_percpu_order());
}
}
static int do_pkvm_init(u32 hyp_va_bits)
{
void *per_cpu_base = kvm_ksym_ref(kvm_arm_hyp_percpu_base);
int ret;
preempt_disable();
hyp_install_host_vector();
ret = kvm_call_hyp_nvhe(__pkvm_init, hyp_mem_base, hyp_mem_size,
num_possible_cpus(), kern_hyp_va(per_cpu_base),
hyp_va_bits);
preempt_enable();
return ret;
}
static int kvm_hyp_init_protection(u32 hyp_va_bits)
{
void *addr = phys_to_virt(hyp_mem_base);
int ret;
kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
ret = create_hyp_mappings(addr, addr + hyp_mem_size, PAGE_HYP);
if (ret)
return ret;
ret = do_pkvm_init(hyp_va_bits);
if (ret)
return ret;
free_hyp_pgds();
return 0;
}
/**
* Inits Hyp-mode on all online CPUs
*/
static int init_hyp_mode(void)
{
u32 hyp_va_bits;
int cpu;
int err = -ENOMEM;
/*
* The protected Hyp-mode cannot be initialized if the memory pool
* allocation has failed.
*/
if (is_protected_kvm_enabled() && !hyp_mem_base)
goto out_err;
/*
* Allocate Hyp PGD and setup Hyp identity mapping
*/
err = kvm_mmu_init(&hyp_va_bits);
if (err)
goto out_err;
/*
* Allocate stack pages for Hypervisor-mode
*/
for_each_possible_cpu(cpu) {
unsigned long stack_page;
stack_page = __get_free_page(GFP_KERNEL);
if (!stack_page) {
err = -ENOMEM;
goto out_err;
}
per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
}
/*
* Allocate and initialize pages for Hypervisor-mode percpu regions.
*/
for_each_possible_cpu(cpu) {
struct page *page;
void *page_addr;
page = alloc_pages(GFP_KERNEL, nvhe_percpu_order());
if (!page) {
err = -ENOMEM;
goto out_err;
}
page_addr = page_address(page);
memcpy(page_addr, CHOOSE_NVHE_SYM(__per_cpu_start), nvhe_percpu_size());
kvm_arm_hyp_percpu_base[cpu] = (unsigned long)page_addr;
}
/*
* Map the Hyp-code called directly from the host
*/
arm64 updates for 4.6: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW6u95AAoJEGvWsS0AyF7xMyoP/3x2O6bgreSQ84BdO4JChN4+ RQ9OVdX8u2ItO9sgaCY2AA6KoiBuEjGmPl/XRuK0I7DpODTtRjEXQHuNNhz8AelC hn4AEVqamY6Z5BzHFIjs8G9ydEbq+OXcKWEdwSsBhP/cMvI7ss3dps1f5iNPT5Vv 50E/kUz+aWYy7pKlB18VDV7TUOA3SuYuGknWV8+bOY5uPb8hNT3Y3fHOg/EuNNN3 DIuYH1V7XQkXtF+oNVIGxzzJCXULBE7egMcWAm1ydSOHK0JwkZAiL7OhI7ceVD0x YlDxBnqmi4cgzfBzTxITAhn3OParwN6udQprdF1WGtFF6fuY2eRDSH/L/iZoE4DY OulL951OsBtF8YC3+RKLk908/0bA2Uw8ftjCOFJTYbSnZBj1gWK41VkCYMEXiHQk EaN8+2Iw206iYIoyvdjGCLw7Y0oakDoVD9vmv12SOaHeQljTkjoN8oIlfjjKTeP7 3AXj5v9BDMDVh40nkVayysRNvqe48Kwt9Wn0rhVTLxwdJEiFG/OIU6HLuTkretdN dcCNFSQrRieSFHpBK9G0vKIpIss1ZwLm8gjocVXH7VK4Mo/TNQe4p2/wAF29mq4r xu1UiXmtU3uWxiqZnt72LOYFCarQ0sFA5+pMEvF5W+NrVB0wGpXhcwm+pGsIi4IM LepccTgykiUBqW5TRzPz =/oS+ -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Here are the main arm64 updates for 4.6. There are some relatively intrusive changes to support KASLR, the reworking of the kernel virtual memory layout and initial page table creation. Summary: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits) arm64: kasan: Fix zero shadow mapping overriding kernel image shadow arm64: kasan: Use actual memory node when populating the kernel image shadow arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission arm64: Fix misspellings in comments. arm64: efi: add missing frame pointer assignment arm64: make mrs_s prefixing implicit in read_cpuid arm64: enable CONFIG_DEBUG_RODATA by default arm64: Rework valid_user_regs arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly arm64: KVM: Move kvm_call_hyp back to its original localtion arm64: mm: treat memstart_addr as a signed quantity arm64: mm: list kernel sections in order arm64: lse: deal with clobbered IP registers after branch via PLT arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR arm64: kconfig: add submenu for 8.2 architectural features arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot arm64: Add support for Half precision floating point arm64: Remove fixmap include fragility arm64: Add workaround for Cavium erratum 27456 arm64: mm: Mark .rodata as RO ...
2016-03-18 11:03:47 +08:00
err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start),
kvm_ksym_ref(__hyp_text_end), PAGE_HYP_EXEC);
if (err) {
kvm_err("Cannot map world-switch code\n");
goto out_err;
}
err = create_hyp_mappings(kvm_ksym_ref(__hyp_rodata_start),
kvm_ksym_ref(__hyp_rodata_end), PAGE_HYP_RO);
if (err) {
kvm_err("Cannot map .hyp.rodata section\n");
goto out_err;
}
err = create_hyp_mappings(kvm_ksym_ref(__start_rodata),
kvm_ksym_ref(__end_rodata), PAGE_HYP_RO);
if (err) {
kvm_err("Cannot map rodata section\n");
goto out_err;
}
/*
* .hyp.bss is guaranteed to be placed at the beginning of the .bss
* section thanks to an assertion in the linker script. Map it RW and
* the rest of .bss RO.
*/
err = create_hyp_mappings(kvm_ksym_ref(__hyp_bss_start),
kvm_ksym_ref(__hyp_bss_end), PAGE_HYP);
if (err) {
kvm_err("Cannot map hyp bss section: %d\n", err);
goto out_err;
}
err = create_hyp_mappings(kvm_ksym_ref(__hyp_bss_end),
kvm_ksym_ref(__bss_stop), PAGE_HYP_RO);
if (err) {
kvm_err("Cannot map bss section\n");
goto out_err;
}
/*
* Map the Hyp stack pages
*/
for_each_possible_cpu(cpu) {
char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE,
PAGE_HYP);
if (err) {
kvm_err("Cannot map hyp stack\n");
goto out_err;
}
}
for_each_possible_cpu(cpu) {
char *percpu_begin = (char *)kvm_arm_hyp_percpu_base[cpu];
char *percpu_end = percpu_begin + nvhe_percpu_size();
/* Map Hyp percpu pages */
err = create_hyp_mappings(percpu_begin, percpu_end, PAGE_HYP);
if (err) {
kvm_err("Cannot map hyp percpu region\n");
goto out_err;
}
/* Prepare the CPU initialization parameters */
cpu_prepare_hyp_mode(cpu);
}
if (is_protected_kvm_enabled()) {
init_cpu_logical_map();
if (!init_psci_relay()) {
err = -ENODEV;
goto out_err;
}
}
if (is_protected_kvm_enabled()) {
err = kvm_hyp_init_protection(hyp_va_bits);
if (err) {
kvm_err("Failed to init hyp memory protection\n");
goto out_err;
}
}
return 0;
out_err:
teardown_hyp_mode();
kvm_err("error initializing Hyp mode: %d\n", err);
return err;
}
static void _kvm_host_prot_finalize(void *discard)
{
WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize));
}
static inline int pkvm_mark_hyp(phys_addr_t start, phys_addr_t end)
{
return kvm_call_hyp_nvhe(__pkvm_mark_hyp, start, end);
}
#define pkvm_mark_hyp_section(__section) \
pkvm_mark_hyp(__pa_symbol(__section##_start), \
__pa_symbol(__section##_end))
static int finalize_hyp_mode(void)
{
int cpu, ret;
if (!is_protected_kvm_enabled())
return 0;
ret = pkvm_mark_hyp_section(__hyp_idmap_text);
if (ret)
return ret;
ret = pkvm_mark_hyp_section(__hyp_text);
if (ret)
return ret;
ret = pkvm_mark_hyp_section(__hyp_rodata);
if (ret)
return ret;
ret = pkvm_mark_hyp_section(__hyp_bss);
if (ret)
return ret;
ret = pkvm_mark_hyp(hyp_mem_base, hyp_mem_base + hyp_mem_size);
if (ret)
return ret;
for_each_possible_cpu(cpu) {
phys_addr_t start = virt_to_phys((void *)kvm_arm_hyp_percpu_base[cpu]);
phys_addr_t end = start + (PAGE_SIZE << nvhe_percpu_order());
ret = pkvm_mark_hyp(start, end);
if (ret)
return ret;
start = virt_to_phys((void *)per_cpu(kvm_arm_hyp_stack_page, cpu));
end = start + PAGE_SIZE;
ret = pkvm_mark_hyp(start, end);
if (ret)
return ret;
}
/*
* Flip the static key upfront as that may no longer be possible
* once the host stage 2 is installed.
*/
static_branch_enable(&kvm_protected_mode_initialized);
on_each_cpu(_kvm_host_prot_finalize, NULL, 1);
return 0;
}
static void check_kvm_target_cpu(void *ret)
{
*(int *)ret = kvm_target_cpu();
}
struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
{
struct kvm_vcpu *vcpu;
int i;
mpidr &= MPIDR_HWID_BITMASK;
kvm_for_each_vcpu(i, vcpu, kvm) {
if (mpidr == kvm_vcpu_get_mpidr_aff(vcpu))
return vcpu;
}
return NULL;
}
bool kvm_arch_has_irq_bypass(void)
{
return true;
}
int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
struct irq_bypass_producer *prod)
{
struct kvm_kernel_irqfd *irqfd =
container_of(cons, struct kvm_kernel_irqfd, consumer);
return kvm_vgic_v4_set_forwarding(irqfd->kvm, prod->irq,
&irqfd->irq_entry);
}
void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
struct irq_bypass_producer *prod)
{
struct kvm_kernel_irqfd *irqfd =
container_of(cons, struct kvm_kernel_irqfd, consumer);
kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq,
&irqfd->irq_entry);
}
void kvm_arch_irq_bypass_stop(struct irq_bypass_consumer *cons)
{
struct kvm_kernel_irqfd *irqfd =
container_of(cons, struct kvm_kernel_irqfd, consumer);
kvm_arm_halt_guest(irqfd->kvm);
}
void kvm_arch_irq_bypass_start(struct irq_bypass_consumer *cons)
{
struct kvm_kernel_irqfd *irqfd =
container_of(cons, struct kvm_kernel_irqfd, consumer);
kvm_arm_resume_guest(irqfd->kvm);
}
/**
* Initialize Hyp-mode and memory mappings on all CPUs.
*/
int kvm_arch_init(void *opaque)
{
int err;
int ret, cpu;
bool in_hyp_mode;
if (!is_hyp_mode_available()) {
kvm_info("HYP mode not available\n");
return -ENODEV;
}
in_hyp_mode = is_kernel_in_hyp_mode();
if (cpus_have_final_cap(ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE) ||
cpus_have_final_cap(ARM64_WORKAROUND_1508412))
kvm_info("Guests without required CPU erratum workarounds can deadlock system!\n" \
"Only trusted guests should be used on this system.\n");
for_each_online_cpu(cpu) {
smp_call_function_single(cpu, check_kvm_target_cpu, &ret, 1);
if (ret < 0) {
kvm_err("Error, CPU %d not supported!\n", cpu);
return -ENODEV;
}
}
err = kvm_set_ipa_limit();
if (err)
return err;
err = kvm_arm_init_sve();
if (err)
return err;
if (!in_hyp_mode) {
err = init_hyp_mode();
if (err)
goto out_err;
}
arm, kvm: Fix CPU hotplug callback registration On 03/15/2014 12:40 AM, Christoffer Dall wrote: > On Fri, Mar 14, 2014 at 11:13:29AM +0530, Srivatsa S. Bhat wrote: >> On 03/13/2014 04:51 AM, Christoffer Dall wrote: >>> On Tue, Mar 11, 2014 at 02:05:38AM +0530, Srivatsa S. Bhat wrote: >>>> Subsystems that want to register CPU hotplug callbacks, as well as perform >>>> initialization for the CPUs that are already online, often do it as shown >>>> below: >>>> [...] >>> Just so we're clear, the existing code was simply racy as not prone to >>> deadlocks, right? >>> >>> This makes it clear that the test above for compatible CPUs can be quite >>> easily evaded by using CPU hotplug, but we don't really have a good >>> solution for handling that yet... Hmmm, grumble grumble, I guess if you >>> hotplug unsupported CPUs on a KVM/ARM system for now, stuff will break. >>> >> >> In this particular case, there was no deadlock possibility, rather the >> existing code had insufficient synchronization against CPU hotplug. >> >> init_hyp_mode() would invoke cpu_init_hyp_mode() on currently online CPUs >> using on_each_cpu(). If a CPU came online after this point and before calling >> register_cpu_notifier(), that CPU would remain uninitialized because this >> subsystem would miss the hot-online event. This patch fixes this bug and >> also uses the new synchronization method (instead of get/put_online_cpus()) >> to ensure that we don't deadlock with CPU hotplug. >> > > Yes, that was my conclusion as well. Thanks for clarifying. (It could > be noted in the commit message as well if you should feel so inclined). > Please find the patch with updated changelog (and your Ack) below. (No changes in code). From: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Subject: [PATCH] arm, kvm: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); In the existing arm kvm code, there is no synchronization with CPU hotplug to avoid missing the hotplug events that might occur after invoking init_hyp_mode() and before calling register_cpu_notifier(). Fix this bug and also use the new synchronization method (instead of get/put_online_cpus()) to ensure that we don't deadlock with CPU hotplug. Cc: Gleb Natapov <gleb@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-18 18:23:05 +08:00
err = kvm_init_vector_slots();
if (err) {
kvm_err("Cannot initialise vector slots\n");
goto out_err;
}
err = init_subsystems();
if (err)
goto out_hyp;
if (!in_hyp_mode) {
err = finalize_hyp_mode();
if (err) {
kvm_err("Failed to finalize Hyp protection\n");
goto out_hyp;
}
}
if (is_protected_kvm_enabled()) {
kvm_info("Protected nVHE mode initialized successfully\n");
} else if (in_hyp_mode) {
kvm_info("VHE mode initialized successfully\n");
} else {
kvm_info("Hyp mode initialized successfully\n");
}
return 0;
out_hyp:
hyp_cpu_pm_exit();
if (!in_hyp_mode)
teardown_hyp_mode();
out_err:
return err;
}
/* NOP: Compiling as a module not supported */
void kvm_arch_exit(void)
{
kvm_perf_teardown();
}
static int __init early_kvm_mode_cfg(char *arg)
{
if (!arg)
return -EINVAL;
if (strcmp(arg, "protected") == 0) {
kvm_mode = KVM_MODE_PROTECTED;
return 0;
}
if (strcmp(arg, "nvhe") == 0 && !WARN_ON(is_kernel_in_hyp_mode()))
return 0;
return -EINVAL;
}
early_param("kvm-arm.mode", early_kvm_mode_cfg);
enum kvm_mode kvm_get_mode(void)
{
return kvm_mode;
}
static int arm_init(void)
{
int rc = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
return rc;
}
module_init(arm_init);