korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-28 13:34:38 +08:00
Code Issues Packages Projects Releases Wiki Activity
beb401ec50
linux/drivers/net/dsa/ocelot/felix.c

847 lines
22 KiB
C
Raw Normal View History

net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
// SPDX-License-Identifier: GPL-2.0
/* Copyright 2019 NXP Semiconductors
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:09 +08:00
*
* This is an umbrella module for all network switches that are
* register-compatible with Ocelot and that perform I/O to their host CPU
* through an NPI (Node Processor Interface) Ethernet port.
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
*/
#include <uapi/linux/if_bridge.h>
net: dsa: felix: Wire up the ocelot cls_flower methods Export the cls_flower methods from the ocelot driver and hook them up to the DSA passthrough layer. Tables for the VCAP IS2 parameters, as well as half key packing (field offsets and lengths) need to be defined for the VSC9959 core, as they are different from Ocelot, mainly due to the different port count. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 22:31:14 +08:00
#include <soc/mscc/ocelot_vcap.h>
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
#include <soc/mscc/ocelot_qsys.h>
#include <soc/mscc/ocelot_sys.h>
#include <soc/mscc/ocelot_dev.h>
#include <soc/mscc/ocelot_ana.h>
net: mscc: ocelot: move ocelot ptp clock code out of ocelot.c The Ocelot PTP clock driver had been embedded into ocelot.c driver. It had supported basic gettime64/settime64/adjtime/adjfine functions by now which were used by both Ocelot switch and Felix switch. This patch is to move current ptp clock code out of ocelot.c driver maintaining as a single ocelot_ptp.c. For futher new features implementation, the common code could be put in ocelot_ptp.c and the switch specific code should be in specific switch driver. The interrupt implementation in SoC is different between Ocelot and Felix. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20 10:46:45 +08:00
#include <soc/mscc/ocelot_ptp.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <soc/mscc/ocelot.h>
net: dsa: felix: introduce support for Seville VSC9953 switch This is another switch from Vitesse / Microsemi / Microchip, that has 10 ports (8 external, 2 internal) and is integrated into the Freescale / NXP T1040 PowerPC SoC. It is very similar to Felix from NXP LS1028A, except that this is a platform device and Felix is a PCI device, and it doesn't support IEEE 1588 and TSN. Like Felix, this driver configures its own PCS on the internal MDIO bus using a phy_device abstraction for it (yes, it will be refactored to use a raw mdio_device, like other phylink drivers do, but let's keep it like that for now). But unlike Felix, the MDIO bus and the PCS are not from the same vendor. The PCS is the same QorIQ/Layerscape PCS as found in Felix/ENETC/DPAA*, but the internal MDIO bus that is used to access it is actually an instantiation of drivers/net/phy/mdio-mscc-miim.c. But it would be difficult to reuse that driver (it doesn't even use regmap, and it's less than 200 lines of code), so we hand-roll here some internal MDIO bus accessors within seville_vsc9953.c, which serves the purpose of driving the PCS absolutely fine. Also, same as Felix, the PCS doesn't support dynamic reconfiguration of SerDes protocol, so we need to do pre-validation of PHY mode from device tree and not let phylink change it. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:10 +08:00
#include <linux/platform_device.h>
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
#include <linux/packing.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <linux/module.h>
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
#include <linux/of_net.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <linux/pci.h>
#include <linux/of.h>
net: dsa: ocelot: use the Lynx PCS helpers in Felix and Seville Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-30 16:34:02 +08:00
#include <linux/pcs-lynx.h>
net: dsa: felix: add port policers This patch is a trivial passthrough towards the ocelot library, which support port policers since commit 2c1d029a017f ("net: mscc: ocelot: Implement port policers via tc command"). Some data structure conversion between the DSA core and the Ocelot library is necessary, for policer parameters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 19:52:00 +08:00
#include <net/pkt_sched.h>
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
#include <net/dsa.h>
#include "felix.h"
static enum dsa_tag_protocol felix_get_tag_protocol(struct dsa_switch *ds,
net: dsa: Get information about stacked DSA protocol It is possible to stack multiple DSA switches in a way that they are not part of the tree (disjoint) but the DSA master of a switch is a DSA slave of another. When that happens switch drivers may have to know this is the case so as to determine whether their tagging protocol has a remove chance of working. This is useful for specific switch drivers such as b53 where devices have been known to be stacked in the wild without the Broadcom tag protocol supporting that feature. This allows b53 to continue supporting those devices by forcing the disabling of Broadcom tags on the outermost switches if necessary. The get_tag_protocol() function is therefore updated to gain an additional enum dsa_tag_protocol argument which denotes the current tagging protocol used by the DSA master we are attached to, else DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08 13:06:05 +08:00
int port,
enum dsa_tag_protocol mp)
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
{
return DSA_TAG_PROTO_OCELOT;
}
static int felix_set_ageing_time(struct dsa_switch *ds,
unsigned int ageing_time)
{
struct ocelot *ocelot = ds->priv;
ocelot_set_ageing_time(ocelot, ageing_time);
return 0;
}
static int felix_fdb_dump(struct dsa_switch *ds, int port,
dsa_fdb_dump_cb_t *cb, void *data)
{
struct ocelot *ocelot = ds->priv;
return ocelot_fdb_dump(ocelot, port, cb, data);
}
static int felix_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct ocelot *ocelot = ds->priv;
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15 03:36:15 +08:00
return ocelot_fdb_add(ocelot, port, addr, vid);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
}
static int felix_fdb_del(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct ocelot *ocelot = ds->priv;
return ocelot_fdb_del(ocelot, port, addr, vid);
}
net: dsa: felix: call port mdb operations from ocelot This adds the mdb hooks in felix and exports the mdb functions from ocelot. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21 19:46:01 +08:00
/* This callback needs to be present */
static int felix_mdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb)
{
return 0;
}
static void felix_mdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_mdb_add(ocelot, port, mdb);
}
static int felix_mdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb)
{
struct ocelot *ocelot = ds->priv;
return ocelot_port_mdb_del(ocelot, port, mdb);
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static void felix_bridge_stp_state_set(struct dsa_switch *ds, int port,
u8 state)
{
struct ocelot *ocelot = ds->priv;
return ocelot_bridge_stp_state_set(ocelot, port, state);
}
static int felix_bridge_join(struct dsa_switch *ds, int port,
struct net_device *br)
{
struct ocelot *ocelot = ds->priv;
return ocelot_port_bridge_join(ocelot, port, br);
}
static void felix_bridge_leave(struct dsa_switch *ds, int port,
struct net_device *br)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_bridge_leave(ocelot, port, br);
}
static int felix_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
net: mscc: ocelot: deny changing the native VLAN from the prepare phase Put the preparation phase of switchdev VLAN objects to some good use, and move the check we already had, for preventing the existence of more than one egress-untagged VLAN per port, to the preparation phase of the addition. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31 18:29:15 +08:00
struct ocelot *ocelot = ds->priv;
u16 vid, flags = vlan->flags;
int err;
net: dsa: felix: improve the workaround for multiple native VLANs on NPI port After the good discussion with Florian from here: https://lore.kernel.org/netdev/20200911000337.htwr366ng3nc3a7d@skbuf/ I realized that the VLAN settings on the NPI port (the hardware "CPU port", in DSA parlance) don't actually make any difference, because that port is hardcoded in hardware to use what mv88e6xxx would call "unmodified" egress policy for VLANs. So earlier patch 183be6f967fe ("net: dsa: felix: send VLANs on CPU port as egress-tagged") was incorrect in the sense that it didn't actually make the VLANs be sent on the NPI port as egress-tagged. It only made ocelot_port_set_native_vlan shut up. Now that we have moved the check from ocelot_port_set_native_vlan to ocelot_vlan_prepare, we can simply shunt ocelot_vlan_prepare from DSA, and avoid calling it. This is the correct way to deal with things, because the NPI port configuration is DSA-specific, so the ocelot switch library should not have the check for multiple native VLANs refined in any way, it is correct the way it is. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31 18:29:16 +08:00
/* Ocelot switches copy frames as-is to the CPU, so the flags:
* egress-untagged or not, pvid or not, make no difference. This
* behavior is already better than what DSA just tries to approximate
* when it installs the VLAN with the same flags on the CPU port.
* Just accept any configuration, and don't let ocelot deny installing
* multiple native VLANs on the NPI port, because the switch doesn't
* look at the port tag settings towards the NPI interface anyway.
*/
if (port == ocelot->npi)
return 0;
net: mscc: ocelot: deny changing the native VLAN from the prepare phase Put the preparation phase of switchdev VLAN objects to some good use, and move the check we already had, for preventing the existence of more than one egress-untagged VLAN per port, to the preparation phase of the addition. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31 18:29:15 +08:00
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
err = ocelot_vlan_prepare(ocelot, port, vid,
flags & BRIDGE_VLAN_INFO_PVID,
flags & BRIDGE_VLAN_INFO_UNTAGGED);
if (err)
return err;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return 0;
}
net: dsa: propagate switchdev vlan_filtering prepare phase to drivers A driver may refuse to enable VLAN filtering for any reason beyond what the DSA framework cares about, such as: - having tc-flower rules that rely on the switch being VLAN-aware - the particular switch does not support VLAN, even if the driver does (the DSA framework just checks for the presence of the .port_vlan_add and .port_vlan_del pointers) - simply not supporting this configuration to be toggled at runtime Currently, when a driver rejects a configuration it cannot support, it does this from the commit phase, which triggers various warnings in switchdev. So propagate the prepare phase to drivers, to give them the ability to refuse invalid configurations cleanly and avoid the warnings. Since we need to modify all function prototypes and check for the prepare phase from within the drivers, take that opportunity and move the existing driver restrictions within the prepare phase where that is possible and easy. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Landen Chao <Landen.Chao@mediatek.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03 06:06:46 +08:00
static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled,
struct switchdev_trans *trans)
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
{
struct ocelot *ocelot = ds->priv;
net: dsa: propagate switchdev vlan_filtering prepare phase to drivers A driver may refuse to enable VLAN filtering for any reason beyond what the DSA framework cares about, such as: - having tc-flower rules that rely on the switch being VLAN-aware - the particular switch does not support VLAN, even if the driver does (the DSA framework just checks for the presence of the .port_vlan_add and .port_vlan_del pointers) - simply not supporting this configuration to be toggled at runtime Currently, when a driver rejects a configuration it cannot support, it does this from the commit phase, which triggers various warnings in switchdev. So propagate the prepare phase to drivers, to give them the ability to refuse invalid configurations cleanly and avoid the warnings. Since we need to modify all function prototypes and check for the prepare phase from within the drivers, take that opportunity and move the existing driver restrictions within the prepare phase where that is possible and easy. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Landen Chao <Landen.Chao@mediatek.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03 06:06:46 +08:00
return ocelot_port_vlan_filtering(ocelot, port, enabled, trans);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
}
static void felix_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct ocelot *ocelot = ds->priv;
net: dsa: felix: send VLANs on CPU port as egress-tagged As explained in other commits before (b9cd75e66895 and 87b0f983f66f), ocelot switches have a single egress-untagged VLAN per port, and the driver would deny adding a second one while an egress-untagged VLAN already exists. But on the CPU port (where the VLAN configuration is implicit, because there is no net device for the bridge to control), the DSA core attempts to add a VLAN using the same flags as were used for the front-panel port. This would make adding any untagged VLAN fail due to the CPU port rejecting the configuration: bridge vlan add dev swp0 vid 100 pvid untagged [ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1 [ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16 (note that port 5 is the CPU port and not the front-panel swp0). So this hardware will send all VLANs as tagged towards the CPU. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28 00:48:03 +08:00
u16 flags = vlan->flags;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
u16 vid;
int err;
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
err = ocelot_vlan_add(ocelot, port, vid,
net: dsa: felix: send VLANs on CPU port as egress-tagged As explained in other commits before (b9cd75e66895 and 87b0f983f66f), ocelot switches have a single egress-untagged VLAN per port, and the driver would deny adding a second one while an egress-untagged VLAN already exists. But on the CPU port (where the VLAN configuration is implicit, because there is no net device for the bridge to control), the DSA core attempts to add a VLAN using the same flags as were used for the front-panel port. This would make adding any untagged VLAN fail due to the CPU port rejecting the configuration: bridge vlan add dev swp0 vid 100 pvid untagged [ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1 [ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16 (note that port 5 is the CPU port and not the front-panel swp0). So this hardware will send all VLANs as tagged towards the CPU. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28 00:48:03 +08:00
flags & BRIDGE_VLAN_INFO_PVID,
flags & BRIDGE_VLAN_INFO_UNTAGGED);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
if (err) {
dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n",
vid, port, err);
return;
}
}
}
static int felix_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct ocelot *ocelot = ds->priv;
u16 vid;
int err;
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
err = ocelot_vlan_del(ocelot, port, vid);
if (err) {
dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n",
vid, port, err);
return err;
}
}
return 0;
}
static int felix_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_enable(ocelot, port, phy);
return 0;
}
static void felix_port_disable(struct dsa_switch *ds, int port)
{
struct ocelot *ocelot = ds->priv;
return ocelot_port_disable(ocelot, port);
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
static void felix_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
{
struct ocelot *ocelot = ds->priv;
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:09 +08:00
struct felix *felix = ocelot_to_felix(ocelot);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:09 +08:00
if (felix->info->phylink_validate)
felix->info->phylink_validate(ocelot, port, supported, state);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
}
static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
const struct phylink_link_state *state)
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
net: dsa: ocelot: use the Lynx PCS helpers in Felix and Seville Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-30 16:34:02 +08:00
struct dsa_port *dp = dsa_to_port(ds, port);
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
net: dsa: ocelot: use the Lynx PCS helpers in Felix and Seville Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-30 16:34:02 +08:00
if (felix->pcs[port])
phylink_set_pcs(dp->pl, &felix->pcs[port]->pcs);
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
}
static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
phy_interface_t interface)
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields Currently Felix and Ocelot share the same bit layout in these per-port registers, but Seville does not. So we need reg_fields for that. Actually since these are per-port registers, we need to also specify the number of ports, and register size per port, and use the regmap API for multiple ports. There's a more subtle point to be made about the other 2 register fields: - QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG - QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE which we are not writing any longer, for 2 reasons: - Using the previous API (ocelot_write_rix), we were only writing 1 for Felix and Ocelot, which was their hardware-default value, and which there wasn't any intention in changing. - In the case of SCH_NEXT_CFG, in fact Seville does not have this register field at all, and therefore, if we want to have common code we would be required to not write to it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:03 +08:00
ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 0);
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
}
static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
phy_interface_t interface,
struct phy_device *phydev,
int speed, int duplex,
bool tx_pause, bool rx_pause)
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
struct felix *felix = ocelot_to_felix(ocelot);
u32 mac_fc_cfg;
/* Take port out of reset by clearing the MAC_TX_RST, MAC_RX_RST and
net: dsa: felix: unconditionally configure MAC speed to 1000Mbps In VSC9959, the PCS is the one who performs rate adaptation (symbol duplication) to the speed negotiated by the PHY. The MAC is unaware of that and must remain configured for gigabit. If it is configured at OCELOT_SPEED_10 or OCELOT_SPEED_100, it'll start transmitting PAUSE frames out of control and never recover, _even if_ we then reconfigure it at OCELOT_SPEED_1000 afterwards. This patch fixes a bug that luckily did not have any functional impact. We were writing 10, 100, 1000 etc into this 2-bit field in DEV_CLOCK_CFG, but the hardware expects values in the range 0, 1, 2, 3. So all speed values were getting truncated to 0, which is OCELOT_SPEED_2500, and which also appears to be fine. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:23 +08:00
* PORT_RST bits in DEV_CLOCK_CFG. Note that the way this system is
* integrated is that the MAC speed is fixed and it's the PCS who is
* performing the rate adaptation, so we have to write "1000Mbps" into
* the LINK_SPEED field of DEV_CLOCK_CFG (which is also its default
* value).
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
*/
net: dsa: felix: unconditionally configure MAC speed to 1000Mbps In VSC9959, the PCS is the one who performs rate adaptation (symbol duplication) to the speed negotiated by the PHY. The MAC is unaware of that and must remain configured for gigabit. If it is configured at OCELOT_SPEED_10 or OCELOT_SPEED_100, it'll start transmitting PAUSE frames out of control and never recover, _even if_ we then reconfigure it at OCELOT_SPEED_1000 afterwards. This patch fixes a bug that luckily did not have any functional impact. We were writing 10, 100, 1000 etc into this 2-bit field in DEV_CLOCK_CFG, but the hardware expects values in the range 0, 1, 2, 3. So all speed values were getting truncated to 0, which is OCELOT_SPEED_2500, and which also appears to be fine. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:23 +08:00
ocelot_port_writel(ocelot_port,
DEV_CLOCK_CFG_LINK_SPEED(OCELOT_SPEED_1000),
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
DEV_CLOCK_CFG);
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
switch (speed) {
net: dsa: felix: set proper pause frame timers based on link speed state->speed holds a value of 10, 100, 1000 or 2500, but SYS_MAC_FC_CFG_FC_LINK_SPEED expects a value in the range 0, 1, 2 or 3. So set the correct speed encoding into this register. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:24 +08:00
case SPEED_10:
mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(3);
break;
case SPEED_100:
mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(2);
break;
case SPEED_1000:
case SPEED_2500:
mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(1);
break;
default:
dev_err(ocelot->dev, "Unsupported speed on port %d: %d\n",
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
port, speed);
net: dsa: felix: set proper pause frame timers based on link speed state->speed holds a value of 10, 100, 1000 or 2500, but SYS_MAC_FC_CFG_FC_LINK_SPEED expects a value in the range 0, 1, 2 or 3. So set the correct speed encoding into this register. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:24 +08:00
return;
}
net: dsa: felix: Handle PAUSE RX regardless of AN result Flow control is used with 2500Base-X and AQR PHYs to do rate adaptation between line side 100/1000 links and MAC running at 2.5G. This is independent of the flow control configuration settled on line side though AN. In general, allowing the MAC to handle flow control even if not negotiated with the link partner should not be a problem, so the patch just enables it in all cases. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17 02:19:32 +08:00
/* handle Rx pause in all cases, with 2500base-X this is used for rate
* adaptation.
*/
mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
if (tx_pause)
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
mac_fc_cfg |= SYS_MAC_FC_CFG_TX_FC_ENA |
SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
SYS_MAC_FC_CFG_FC_LATENCY_CFG(0x7) |
SYS_MAC_FC_CFG_ZERO_PAUSE_ENA;
net: dsa: felix: set proper pause frame timers based on link speed state->speed holds a value of 10, 100, 1000 or 2500, but SYS_MAC_FC_CFG_FC_LINK_SPEED expects a value in the range 0, 1, 2 or 3. So set the correct speed encoding into this register. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:24 +08:00
/* Flow control. Link speed is only used here to evaluate the time
* specification in incoming pause frames.
*/
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
ocelot_write_rix(ocelot, mac_fc_cfg, SYS_MAC_FC_CFG, port);
ocelot_write_rix(ocelot, 0, ANA_POL_FLOWC, port);
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
/* Undo the effects of felix_phylink_mac_link_down:
* enable MAC module
*/
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA |
DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
/* Enable receiving frames on the port, and activate auto-learning of
* MAC addresses.
*/
ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_LEARNAUTO |
ANA_PORT_PORT_CFG_RECV_ENA |
ANA_PORT_PORT_CFG_PORTID_VAL(port),
ANA_PORT_PORT_CFG, port);
/* Core: Enable port for frame transfer */
net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields Currently Felix and Ocelot share the same bit layout in these per-port registers, but Seville does not. So we need reg_fields for that. Actually since these are per-port registers, we need to also specify the number of ports, and register size per port, and use the regmap API for multiple ports. There's a more subtle point to be made about the other 2 register fields: - QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG - QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE which we are not writing any longer, for 2 reasons: - Using the previous API (ocelot_write_rix), we were only writing 1 for Felix and Ocelot, which was their hardware-default value, and which there wasn't any intention in changing. - In the case of SCH_NEXT_CFG, in fact Seville does not have this register field at all, and therefore, if we want to have common code we would be required to not write to it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:03 +08:00
ocelot_fields_write(ocelot, port,
QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
net: dsa: felix: use resolved link config in mac_link_up() Phylink now requires that parameters established through auto-negotiation be written into the MAC at the time of the mac_link_up() callback. In the case of felix, that means taking the port out of reset, setting the correct timers for PAUSE frames, and enabling/disabling TX flow control. This patch also splits the inband and noinband configuration of the vsc9959 PCS (currently found in a function called "init") into 2 different functions, which have a nomenclature closer to phylink: "config", for inband setup, and "link_up", for noinband (forced) setup. This is necessary as a preparation step for giving up control of the PCS to phylink, which will be done in further patch series. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 00:16:26 +08:00
if (felix->info->port_sched_speed_set)
felix->info->port_sched_speed_set(ocelot, port, speed);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
}
net: dsa: felix: qos classified based on pcp Set the default QoS Classification based on PCP and DEI of vlan tag, after that, frames can be Classified to different Qos based on PCP tag. If there is no vlan tag or vlan ignored, use port default Qos. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13 10:25:08 +08:00
static void felix_port_qos_map_init(struct ocelot *ocelot, int port)
{
int i;
ocelot_rmw_gix(ocelot,
ANA_PORT_QOS_CFG_QOS_PCP_ENA,
ANA_PORT_QOS_CFG_QOS_PCP_ENA,
ANA_PORT_QOS_CFG,
port);
for (i = 0; i < FELIX_NUM_TC * 2; i++) {
ocelot_rmw_ix(ocelot,
(ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL & i) |
ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL(i),
ANA_PORT_PCP_DEI_MAP_DP_PCP_DEI_VAL |
ANA_PORT_PCP_DEI_MAP_QOS_PCP_DEI_VAL_M,
ANA_PORT_PCP_DEI_MAP,
port, i);
}
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static void felix_get_strings(struct dsa_switch *ds, int port,
u32 stringset, u8 *data)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_strings(ocelot, port, stringset, data);
}
static void felix_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data)
{
struct ocelot *ocelot = ds->priv;
ocelot_get_ethtool_stats(ocelot, port, data);
}
static int felix_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_sset_count(ocelot, port, sset);
}
static int felix_get_ts_info(struct dsa_switch *ds, int port,
struct ethtool_ts_info *info)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_ts_info(ocelot, port, info);
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
static int felix_parse_ports_node(struct felix *felix,
struct device_node *ports_node,
phy_interface_t *port_phy_modes)
{
struct ocelot *ocelot = &felix->ocelot;
struct device *dev = felix->ocelot.dev;
struct device_node *child;
net: dsa: felix: Don't error out on disabled ports with no phy-mode The felix_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17 02:41:53 +08:00
for_each_available_child_of_node(ports_node, child) {
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
phy_interface_t phy_mode;
u32 port;
int err;
/* Get switch port number from DT */
if (of_property_read_u32(child, "reg", &port) < 0) {
dev_err(dev, "Port number not defined in device tree "
"(property \"reg\")\n");
of_node_put(child);
return -ENODEV;
}
/* Get PHY mode from DT */
err = of_get_phy_mode(child, &phy_mode);
if (err) {
dev_err(dev, "Failed to read phy-mode or "
"phy-interface-type property for port %d\n",
port);
of_node_put(child);
return -ENODEV;
}
err = felix->info->prevalidate_phy_mode(ocelot, port, phy_mode);
if (err < 0) {
dev_err(dev, "Unsupported PHY mode %s on port %d\n",
phy_modes(phy_mode), port);
net: ocelot: Add of_node_put() before return statement Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in felix.c by inserting of_node_put() before the return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23 21:52:45 +08:00
of_node_put(child);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
return err;
}
port_phy_modes[port] = phy_mode;
}
return 0;
}
static int felix_parse_dt(struct felix *felix, phy_interface_t *port_phy_modes)
{
struct device *dev = felix->ocelot.dev;
struct device_node *switch_node;
struct device_node *ports_node;
int err;
switch_node = dev->of_node;
ports_node = of_get_child_by_name(switch_node, "ports");
if (!ports_node) {
dev_err(dev, "Incorrect bindings: absent \"ports\" node\n");
return -ENODEV;
}
err = felix_parse_ports_node(felix, ports_node, port_phy_modes);
of_node_put(ports_node);
return err;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
static int felix_init_structs(struct felix *felix, int num_phys_ports)
{
struct ocelot *ocelot = &felix->ocelot;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
phy_interface_t *port_phy_modes;
felix: Fix initialization of ioremap resources The caller of devm_ioremap_resource(), either accidentally or by wrong assumption, is writing back derived resource data to global static resource initialization tables that should have been constant. Meaning that after it computes the final physical start address it saves the address for no reason in the static tables. This doesn't affect the first driver probing after reboot, but it breaks consecutive driver reloads (i.e. driver unbind & bind) because the initialization tables no longer have the correct initial values. So the next probe() will map the device registers to wrong physical addresses, causing ARM SError async exceptions. This patch fixes all of the above. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 16:54:34 +08:00
struct resource res;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
int port, i, err;
ocelot->num_phys_ports = num_phys_ports;
ocelot->ports = devm_kcalloc(ocelot->dev, num_phys_ports,
sizeof(struct ocelot_port *), GFP_KERNEL);
if (!ocelot->ports)
return -ENOMEM;
ocelot->map = felix->info->map;
ocelot->stats_layout = felix->info->stats_layout;
ocelot->num_stats = felix->info->num_stats;
ocelot->shared_queue_sz = felix->info->shared_queue_sz;
net: dsa: ocelot: the MAC table on Felix is twice as large When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04 06:20:26 +08:00
ocelot->num_mact_rows = felix->info->num_mact_rows;
net: dsa: felix: Wire up the ocelot cls_flower methods Export the cls_flower methods from the ocelot driver and hook them up to the DSA passthrough layer. Tables for the VCAP IS2 parameters, as well as half key packing (field offsets and lengths) need to be defined for the VSC9959 core, as they are different from Ocelot, mainly due to the different port count. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 22:31:14 +08:00
ocelot->vcap = felix->info->vcap;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ocelot->ops = felix->info->ops;
net: dsa: tag_ocelot: use a short prefix on both ingress and egress There are 2 goals that we follow: - Reduce the header size - Make the header size equal between RX and TX The issue that required long prefix on RX was the fact that the ocelot DSA tag, being put before Ethernet as it is, would overlap with the area that a DSA master uses for RX filtering (destination MAC address mainly). Now that we can ask DSA to put the master in promiscuous mode, in theory we could remove the prefix altogether and call it a day, but it looks like we can't. Using no prefix on ingress, some packets (such as ICMP) would be received, while others (such as PTP) would not be received. This is because the DSA master we use (enetc) triggers parse errors ("MAC rx frame errors") presumably because it sees Ethernet frames with a bad length. And indeed, when using no prefix, the EtherType (bytes 12-13 of the frame, bits 96-111) falls over the REW_VAL field from the extraction header, aka the PTP timestamp. When turning the short (32-bit) prefix on, the EtherType overlaps with bits 64-79 of the extraction header, which are a reserved area transmitted as zero by the switch. The packets are not dropped by the DSA master with a short prefix. Actually, the frames look like this in tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 - added by a downstream sja1105). 89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \ dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \ ctrl 0x0004: Information, send seq 2, rcv seq 0, \ Flags [Response], length 78 0x0000: 8880 000a 001d 890c a9f2 0100 0000 100f ................ 0x0010: 0400 0000 0180 c200 000e 001f 7b63 0248 ............{c.H 0x0020: dadb 0482 88f7 1202 0036 0000 0000 0000 .........6...... 0x0030: 0000 0000 0000 0000 0000 001f 7bff fe63 ............{..c 0x0040: 0248 0001 1f81 0500 0000 0000 0000 0000 .H.............. 0x0050: 0000 0000 0000 0000 0000 0000 ............ So the short prefix is our new default: we've shortened our RX frames by 12 octets, increased TX by 4, and headers are now equal between RX and TX. Note that we still need promiscuous mode for the DSA master to not drop it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27 03:32:04 +08:00
ocelot->inj_prefix = OCELOT_TAG_PREFIX_SHORT;
ocelot->xtr_prefix = OCELOT_TAG_PREFIX_SHORT;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t),
GFP_KERNEL);
if (!port_phy_modes)
return -ENOMEM;
err = felix_parse_dt(felix, port_phy_modes);
if (err) {
kfree(port_phy_modes);
return err;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
for (i = 0; i < TARGET_MAX; i++) {
struct regmap *target;
if (!felix->info->target_io_res[i].name)
continue;
felix: Fix initialization of ioremap resources The caller of devm_ioremap_resource(), either accidentally or by wrong assumption, is writing back derived resource data to global static resource initialization tables that should have been constant. Meaning that after it computes the final physical start address it saves the address for no reason in the static tables. This doesn't affect the first driver probing after reboot, but it breaks consecutive driver reloads (i.e. driver unbind & bind) because the initialization tables no longer have the correct initial values. So the next probe() will map the device registers to wrong physical addresses, causing ARM SError async exceptions. This patch fixes all of the above. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 16:54:34 +08:00
memcpy(&res, &felix->info->target_io_res[i], sizeof(res));
res.flags = IORESOURCE_MEM;
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:09 +08:00
res.start += felix->switch_base;
res.end += felix->switch_base;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
felix: Fix initialization of ioremap resources The caller of devm_ioremap_resource(), either accidentally or by wrong assumption, is writing back derived resource data to global static resource initialization tables that should have been constant. Meaning that after it computes the final physical start address it saves the address for no reason in the static tables. This doesn't affect the first driver probing after reboot, but it breaks consecutive driver reloads (i.e. driver unbind & bind) because the initialization tables no longer have the correct initial values. So the next probe() will map the device registers to wrong physical addresses, causing ARM SError async exceptions. This patch fixes all of the above. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 16:54:34 +08:00
target = ocelot_regmap_init(ocelot, &res);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
if (IS_ERR(target)) {
dev_err(ocelot->dev,
"Failed to map device memory space\n");
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return PTR_ERR(target);
}
ocelot->targets[i] = target;
}
err = ocelot_regfields_init(ocelot, felix->info->regfields);
if (err) {
dev_err(ocelot->dev, "failed to init reg fields map\n");
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return err;
}
for (port = 0; port < num_phys_ports; port++) {
struct ocelot_port *ocelot_port;
net: mscc: ocelot: convert port registers to regmap At the moment, there are some minimal register differences between VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are missing from Felix because it was integrated with an NXP PCS. But with VSC9953 Seville (not yet introduced), the register differences are more pronounced. The MAC registers are located at different offsets within the DEV_GMII target. So we need to refactor the driver to keep a regmap even for per-port registers. The callers of the ocelot_port_readl and ocelot_port_writel were kept unchanged, only the implementation is now more generic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:01 +08:00
struct regmap *target;
net: dsa: felix: create a template for the DSA tags on xmit With this patch we try to kill 2 birds with 1 stone. First of all, some switches that use tag_ocelot.c don't have the exact same bitfield layout for the DSA tags. The destination ports field is different for Seville VSC9953 for example. So the choices are to either duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow take into account a supposed ocelot->dest_ports_offset when packing this field into the DSA injection header (again not ideal). Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero and call some packing() functions of dubious performance in the fastpath. And most of the values it needs to pack are pretty much constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good if we could improve that. The proposed solution is to allocate a memory area per port at probe time, initialize that with the statically defined bits as per chip hardware revision, and just perform a simpler memcpy in the fastpath. Other alternatives have been analyzed, such as: - Create a separate tag_seville.c: too much code duplication for just 1 bit field difference. - Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like tag_brcm.c, which would have a separate .xmit function. Again, too much code duplication for just 1 bit field difference. - Allocate the template from the init function of the tag_ocelot.c module, instead of from the driver: couldn't figure out a method of accessing the correct port template corresponding to the correct tagger in the .xmit function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:04 +08:00
u8 *template;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ocelot_port = devm_kzalloc(ocelot->dev,
sizeof(struct ocelot_port),
GFP_KERNEL);
if (!ocelot_port) {
dev_err(ocelot->dev,
"failed to allocate port memory\n");
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return -ENOMEM;
}
felix: Fix initialization of ioremap resources The caller of devm_ioremap_resource(), either accidentally or by wrong assumption, is writing back derived resource data to global static resource initialization tables that should have been constant. Meaning that after it computes the final physical start address it saves the address for no reason in the static tables. This doesn't affect the first driver probing after reboot, but it breaks consecutive driver reloads (i.e. driver unbind & bind) because the initialization tables no longer have the correct initial values. So the next probe() will map the device registers to wrong physical addresses, causing ARM SError async exceptions. This patch fixes all of the above. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 16:54:34 +08:00
memcpy(&res, &felix->info->port_io_res[port], sizeof(res));
res.flags = IORESOURCE_MEM;
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:09 +08:00
res.start += felix->switch_base;
res.end += felix->switch_base;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
net: mscc: ocelot: convert port registers to regmap At the moment, there are some minimal register differences between VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are missing from Felix because it was integrated with an NXP PCS. But with VSC9953 Seville (not yet introduced), the register differences are more pronounced. The MAC registers are located at different offsets within the DEV_GMII target. So we need to refactor the driver to keep a regmap even for per-port registers. The callers of the ocelot_port_readl and ocelot_port_writel were kept unchanged, only the implementation is now more generic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:01 +08:00
target = ocelot_regmap_init(ocelot, &res);
if (IS_ERR(target)) {
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
dev_err(ocelot->dev,
net: mscc: ocelot: convert port registers to regmap At the moment, there are some minimal register differences between VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are missing from Felix because it was integrated with an NXP PCS. But with VSC9953 Seville (not yet introduced), the register differences are more pronounced. The MAC registers are located at different offsets within the DEV_GMII target. So we need to refactor the driver to keep a regmap even for per-port registers. The callers of the ocelot_port_readl and ocelot_port_writel were kept unchanged, only the implementation is now more generic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:01 +08:00
"Failed to map memory space for port %d\n",
port);
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
net: mscc: ocelot: convert port registers to regmap At the moment, there are some minimal register differences between VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are missing from Felix because it was integrated with an NXP PCS. But with VSC9953 Seville (not yet introduced), the register differences are more pronounced. The MAC registers are located at different offsets within the DEV_GMII target. So we need to refactor the driver to keep a regmap even for per-port registers. The callers of the ocelot_port_readl and ocelot_port_writel were kept unchanged, only the implementation is now more generic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:01 +08:00
return PTR_ERR(target);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
}
net: dsa: tag_ocelot: use a short prefix on both ingress and egress There are 2 goals that we follow: - Reduce the header size - Make the header size equal between RX and TX The issue that required long prefix on RX was the fact that the ocelot DSA tag, being put before Ethernet as it is, would overlap with the area that a DSA master uses for RX filtering (destination MAC address mainly). Now that we can ask DSA to put the master in promiscuous mode, in theory we could remove the prefix altogether and call it a day, but it looks like we can't. Using no prefix on ingress, some packets (such as ICMP) would be received, while others (such as PTP) would not be received. This is because the DSA master we use (enetc) triggers parse errors ("MAC rx frame errors") presumably because it sees Ethernet frames with a bad length. And indeed, when using no prefix, the EtherType (bytes 12-13 of the frame, bits 96-111) falls over the REW_VAL field from the extraction header, aka the PTP timestamp. When turning the short (32-bit) prefix on, the EtherType overlaps with bits 64-79 of the extraction header, which are a reserved area transmitted as zero by the switch. The packets are not dropped by the DSA master with a short prefix. Actually, the frames look like this in tcpdump (below is a PTP frame, with an extra dsa_8021q tag - dadb 0482 - added by a downstream sja1105). 89:0c:a9:f2:01:00 > 88:80:00:0a:00:1d, 802.3, length 0: LLC, \ dsap Unknown (0x10) Individual, ssap ProWay NM (0x0e) Response, \ ctrl 0x0004: Information, send seq 2, rcv seq 0, \ Flags [Response], length 78 0x0000: 8880 000a 001d 890c a9f2 0100 0000 100f ................ 0x0010: 0400 0000 0180 c200 000e 001f 7b63 0248 ............{c.H 0x0020: dadb 0482 88f7 1202 0036 0000 0000 0000 .........6...... 0x0030: 0000 0000 0000 0000 0000 001f 7bff fe63 ............{..c 0x0040: 0248 0001 1f81 0500 0000 0000 0000 0000 .H.............. 0x0050: 0000 0000 0000 0000 0000 0000 ............ So the short prefix is our new default: we've shortened our RX frames by 12 octets, increased TX by 4, and headers are now equal between RX and TX. Note that we still need promiscuous mode for the DSA master to not drop it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27 03:32:04 +08:00
template = devm_kzalloc(ocelot->dev, OCELOT_TOTAL_TAG_LEN,
net: dsa: felix: create a template for the DSA tags on xmit With this patch we try to kill 2 birds with 1 stone. First of all, some switches that use tag_ocelot.c don't have the exact same bitfield layout for the DSA tags. The destination ports field is different for Seville VSC9953 for example. So the choices are to either duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow take into account a supposed ocelot->dest_ports_offset when packing this field into the DSA injection header (again not ideal). Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero and call some packing() functions of dubious performance in the fastpath. And most of the values it needs to pack are pretty much constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good if we could improve that. The proposed solution is to allocate a memory area per port at probe time, initialize that with the statically defined bits as per chip hardware revision, and just perform a simpler memcpy in the fastpath. Other alternatives have been analyzed, such as: - Create a separate tag_seville.c: too much code duplication for just 1 bit field difference. - Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like tag_brcm.c, which would have a separate .xmit function. Again, too much code duplication for just 1 bit field difference. - Allocate the template from the init function of the tag_ocelot.c module, instead of from the driver: couldn't figure out a method of accessing the correct port template corresponding to the correct tagger in the .xmit function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:04 +08:00
GFP_KERNEL);
if (!template) {
dev_err(ocelot->dev,
"Failed to allocate memory for DSA tag\n");
kfree(port_phy_modes);
return -ENOMEM;
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
ocelot_port->phy_mode = port_phy_modes[port];
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ocelot_port->ocelot = ocelot;
net: mscc: ocelot: convert port registers to regmap At the moment, there are some minimal register differences between VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are missing from Felix because it was integrated with an NXP PCS. But with VSC9953 Seville (not yet introduced), the register differences are more pronounced. The MAC registers are located at different offsets within the DEV_GMII target. So we need to refactor the driver to keep a regmap even for per-port registers. The callers of the ocelot_port_readl and ocelot_port_writel were kept unchanged, only the implementation is now more generic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:01 +08:00
ocelot_port->target = target;
net: dsa: felix: create a template for the DSA tags on xmit With this patch we try to kill 2 birds with 1 stone. First of all, some switches that use tag_ocelot.c don't have the exact same bitfield layout for the DSA tags. The destination ports field is different for Seville VSC9953 for example. So the choices are to either duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow take into account a supposed ocelot->dest_ports_offset when packing this field into the DSA injection header (again not ideal). Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero and call some packing() functions of dubious performance in the fastpath. And most of the values it needs to pack are pretty much constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good if we could improve that. The proposed solution is to allocate a memory area per port at probe time, initialize that with the statically defined bits as per chip hardware revision, and just perform a simpler memcpy in the fastpath. Other alternatives have been analyzed, such as: - Create a separate tag_seville.c: too much code duplication for just 1 bit field difference. - Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like tag_brcm.c, which would have a separate .xmit function. Again, too much code duplication for just 1 bit field difference. - Allocate the template from the init function of the tag_ocelot.c module, instead of from the driver: couldn't figure out a method of accessing the correct port template corresponding to the correct tagger in the .xmit function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:04 +08:00
ocelot_port->xmit_template = template;
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
ocelot->ports[port] = ocelot_port;
net: dsa: felix: create a template for the DSA tags on xmit With this patch we try to kill 2 birds with 1 stone. First of all, some switches that use tag_ocelot.c don't have the exact same bitfield layout for the DSA tags. The destination ports field is different for Seville VSC9953 for example. So the choices are to either duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow take into account a supposed ocelot->dest_ports_offset when packing this field into the DSA injection header (again not ideal). Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero and call some packing() functions of dubious performance in the fastpath. And most of the values it needs to pack are pretty much constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good if we could improve that. The proposed solution is to allocate a memory area per port at probe time, initialize that with the statically defined bits as per chip hardware revision, and just perform a simpler memcpy in the fastpath. Other alternatives have been analyzed, such as: - Create a separate tag_seville.c: too much code duplication for just 1 bit field difference. - Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like tag_brcm.c, which would have a separate .xmit function. Again, too much code duplication for just 1 bit field difference. - Allocate the template from the init function of the tag_ocelot.c module, instead of from the driver: couldn't figure out a method of accessing the correct port template corresponding to the correct tagger in the .xmit function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:04 +08:00
felix->info->xmit_template_populate(ocelot, port);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
}
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
kfree(port_phy_modes);
if (felix->info->mdio_bus_alloc) {
err = felix->info->mdio_bus_alloc(ocelot);
if (err < 0)
return err;
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return 0;
}
net: mscc: ocelot: move NPI port configuration to DSA Remove the ocelot_configure_cpu() function, which was in fact bringing up 2 ports: the CPU port module, which both switchdev and DSA have, and the NPI port, which only DSA has. The (non-Ethernet) CPU port module is at a fixed index in the analyzer, whereas the NPI port is selected through the "ethernet" property in the device tree. Therefore, the function to set up an NPI port is DSA-specific, so we move it there, simplifying the ocelot switch library a little bit. Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27 03:32:01 +08:00
/* The CPU port module is connected to the Node Processor Interface (NPI). This
* is the mode through which frames can be injected from and extracted to an
* external CPU, over Ethernet.
*/
static void felix_npi_port_init(struct ocelot *ocelot, int port)
{
ocelot->npi = port;
ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
QSYS_EXT_CPU_CFG_EXT_CPU_PORT(port),
QSYS_EXT_CPU_CFG);
/* NPI port Injection/Extraction configuration */
ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_XTR_HDR,
ocelot->xtr_prefix);
ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_INJ_HDR,
ocelot->inj_prefix);
/* Disable transmission of pause frames */
ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 0);
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
/* Hardware initialization done here so that we can allocate structures with
* devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing
* us to allocate structures twice (leak memory) and map PCI memory twice
* (which will not work).
*/
static int felix_setup(struct dsa_switch *ds)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
int port, err;
err = felix_init_structs(felix, ds->num_ports);
if (err)
return err;
net: mscc: ocelot: error checking when calling ocelot_init() ocelot_init() allocates memory, resets the switch and polls for a status register, things which can fail. Stop probing the driver in that case, and propagate the error result. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 09:07:27 +08:00
err = ocelot_init(ocelot);
if (err)
return err;
net: mscc: ocelot: move ocelot ptp clock code out of ocelot.c The Ocelot PTP clock driver had been embedded into ocelot.c driver. It had supported basic gettime64/settime64/adjtime/adjfine functions by now which were used by both Ocelot switch and Felix switch. This patch is to move current ptp clock code out of ocelot.c driver maintaining as a single ocelot_ptp.c. For futher new features implementation, the common code could be put in ocelot_ptp.c and the switch specific code should be in specific switch driver. The interrupt implementation in SoC is different between Ocelot and Felix. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20 10:46:45 +08:00
if (ocelot->ptp) {
net: dsa: felix: move the PTP clock structure to felix_vsc9959.c Not only does Sevile not have a PTP clock, but with separate modules, this structure cannot even live in felix.c, due to the .owner = THIS_MODULE assignment causing this link time error: drivers/net/dsa/ocelot/felix.o:(.data+0x0): undefined reference to `__this_module' Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 18:57:52 +08:00
err = ocelot_init_timestamp(ocelot, felix->info->ptp_caps);
net: mscc: ocelot: move ocelot ptp clock code out of ocelot.c The Ocelot PTP clock driver had been embedded into ocelot.c driver. It had supported basic gettime64/settime64/adjtime/adjfine functions by now which were used by both Ocelot switch and Felix switch. This patch is to move current ptp clock code out of ocelot.c driver maintaining as a single ocelot_ptp.c. For futher new features implementation, the common code could be put in ocelot_ptp.c and the switch specific code should be in specific switch driver. The interrupt implementation in SoC is different between Ocelot and Felix. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20 10:46:45 +08:00
if (err) {
dev_err(ocelot->dev,
"Timestamp initialization failed\n");
ocelot->ptp = 0;
}
}
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
for (port = 0; port < ds->num_ports; port++) {
ocelot_init_port(ocelot, port);
net: dsa: felix: Fix CPU port assignment when not last port On the NXP LS1028A, there are 2 Ethernet links between the Felix switch and the ENETC: - eno2 <-> swp4, at 2.5G - eno3 <-> swp5, at 1G Only one of the above Ethernet port pairs can act as a DSA link for tagging. When adding initial support for the driver, it was tested only on the 1G eno3 <-> swp5 interface, due to the necessity of using PHYLIB initially (which treats fixed-link interfaces as emulated C22 PHYs, so it doesn't support fixed-link speeds higher than 1G). After making PHYLINK work, it appears that swp4 still can't act as CPU port. So it looks like ocelot_set_cpu_port was being called for swp4, but then it was called again for swp5, overwriting the CPU port assigned in the DT. It appears that when you call dsa_upstream_port for a port that is not defined in the device tree (such as swp5 when using swp4 as CPU port), its dp->cpu_dp pointer is not initialized by dsa_tree_setup_default_cpu, and this trips up the following condition in dsa_upstream_port: if (!cpu_dp) return port; So the moral of the story is: don't call dsa_upstream_port for a port that is not defined in the device tree, and therefore its dsa_port structure is not completely initialized (ds->num_ports is still 6). Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19 02:16:57 +08:00
if (dsa_is_cpu_port(ds, port))
net: mscc: ocelot: move NPI port configuration to DSA Remove the ocelot_configure_cpu() function, which was in fact bringing up 2 ports: the CPU port module, which both switchdev and DSA have, and the NPI port, which only DSA has. The (non-Ethernet) CPU port module is at a fixed index in the analyzer, whereas the NPI port is selected through the "ethernet" property in the device tree. Therefore, the function to set up an NPI port is DSA-specific, so we move it there, simplifying the ocelot switch library a little bit. Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27 03:32:01 +08:00
felix_npi_port_init(ocelot, port);
net: dsa: felix: qos classified based on pcp Set the default QoS Classification based on PCP and DEI of vlan tag, after that, frames can be Classified to different Qos based on PCP tag. If there is no vlan tag or vlan ignored, use port default Qos. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13 10:25:08 +08:00
/* Set the default QoS Classification based on PCP and DEI
* bits of vlan tag.
*/
felix_port_qos_map_init(ocelot, port);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
}
net: dsa: felix: Allow unknown unicast traffic towards the CPU port module Compared to other DSA switches, in the Ocelot cores, the RX filtering is a much more important concern. Firstly, the primary use case for Ocelot is non-DSA, so there isn't any secondary Ethernet MAC [the DSA master's one] to implicitly drop frames having a DMAC we are not interested in. So the switch driver itself needs to install FDB entries towards the CPU port module (PGID_CPU) for the MAC address of each switch port, in each VLAN installed on the port. Every address that is not whitelisted is implicitly dropped. This is in order to achieve a behavior similar to N standalone net devices. Secondly, even in the secondary use case of DSA, such as illustrated by Felix with the NPI port mode, that secondary Ethernet MAC is present, but its RX filter is bypassed. This is because the DSA tags themselves are placed before Ethernet, so the DMAC that the switch ports see is not seen by the DSA master too (since it's shifter to the right). So RX filtering is pretty important. A good RX filter won't bother the CPU in case the switch port receives a frame that it's not interested in, and there exists no other line of defense. Ocelot is pretty strict when it comes to RX filtering: non-IP multicast and broadcast traffic is allowed to go to the CPU port module, but unknown unicast isn't. This means that traffic reception for any other MAC addresses than the ones configured on each switch port net device won't work. This includes use cases such as macvlan or bridging with a non-Ocelot (so-called "foreign") interface. But this seems to be fine for the scenarios that the Linux system embedded inside an Ocelot switch is intended for - it is simply not interested in unknown unicast traffic, as explained in Allan Nielsen's presentation [0]. On the other hand, the Felix DSA switch is integrated in more general-purpose Linux systems, so it can't afford to drop that sort of traffic in hardware, even if it will end up doing so later, in software. Actually, unknown unicast means more for Felix than it does for Ocelot. Felix doesn't attempt to perform the whitelisting of switch port MAC addresses towards PGID_CPU at all, mainly because it is too complicated to be feasible: while the MAC addresses are unique in Ocelot, by default in DSA all ports are equal and inherited from the DSA master. This adds into account the question of reference counting MAC addresses (delayed ocelot_mact_forget), not to mention reference counting for the VLAN IDs that those MAC addresses are installed in. This reference counting should be done in the DSA core, and the fact that it wasn't needed so far is due to the fact that the other DSA switches don't have the DSA tag placed before Ethernet, so the DSA master is able to whitelist the MAC addresses in hardware. So this means that even regular traffic termination on a Felix switch port happens through flooding (because neither Felix nor Ocelot learn source MAC addresses from CPU-injected frames). So far we've explained that whitelisting towards PGID_CPU: - helps to reduce the likelihood of spamming the CPU with frames it won't process very far anyway - is implemented in the ocelot driver - is sufficient for the ocelot use cases - is not feasible in DSA - breaks use cases in DSA, in the current status (whitelisting enabled but no MAC address whitelisted) So the proposed patch allows unknown unicast frames to be sent to the CPU port module. This is done for the Felix DSA driver only, as Ocelot seems to be happy without it. [0]: https://www.youtube.com/watch?v=B1HhxEcU7Jg Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 22:50:03 +08:00
/* Include the CPU port module in the forwarding mask for unknown
* unicast - the hardware default value for ANA_FLOODING_FLD_UNICAST
* excludes BIT(ocelot->num_phys_ports), and so does ocelot_init, since
* Ocelot relies on whitelisting MAC addresses towards PGID_CPU.
*/
ocelot_write_rix(ocelot,
ANA_PGID_PGID_PGID(GENMASK(ocelot->num_phys_ports, 0)),
ANA_PGID_PGID, PGID_UC);
net: dsa: felix: support changing the MTU Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 03:55:47 +08:00
ds->mtu_enforcement_ingress = true;
net: dsa: felix: accept VLAN config regardless of bridge VLAN awareness state The ocelot core library is written with the idea in mind that the VLAN table is populated by the bridge. Otherwise, not even a sane default pvid is provided: in standalone mode, the default pvid is 0, and the core expects the bridge layer to change it to 1. So without this patch, the VLAN table is completely empty at the end of the commands below, and traffic is broken as a result: ip link add dev br0 type bridge vlan_filtering 0 && ip link set dev br0 up for eth in $(ls /sys/bus/pci/devices/0000\:00\:00.5/net/); do ip link set dev $eth master br0 ip link set dev $eth up done ip link set dev br0 type bridge vlan_filtering 1 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28 00:45:38 +08:00
ds->configure_vlan_while_not_filtering = true;
net: dsa: ocelot: request DSA to fix up lack of address learning on CPU port Given the following setup: ip link add br0 type bridge ip link set eno0 master br0 ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 Currently, packets received on a DSA slave interface (such as swp0) which should be routed by the software bridge towards a non-switch port (such as eno0) are also flooded towards the other switch ports (swp1, swp2, swp3) because the destination is unknown to the hardware switch. This patch addresses the issue by monitoring the addresses learnt by the software bridge on eno0, and adding/deleting them as static FDB entries on the CPU port accordingly. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 17:51:36 +08:00
ds->assisted_learning_on_cpu_port = true;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
return 0;
}
static void felix_teardown(struct dsa_switch *ds)
{
struct ocelot *ocelot = ds->priv;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
struct felix *felix = ocelot_to_felix(ocelot);
net: mscc: ocelot: deinitialize only initialized ports Currently mscc_ocelot_init_ports() will skip initializing a port when it doesn't have a phy-handle, so the ocelot->ports[port] pointer will be NULL. Take this into consideration when tearing down the driver, and add a new function ocelot_deinit_port() to the switch library, mirror of ocelot_init_port(), which needs to be called by the driver for all ports it has initialized. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 09:07:30 +08:00
int port;
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
if (felix->info->mdio_bus_free)
felix->info->mdio_bus_free(ocelot);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
net: mscc: ocelot: deinitialize only initialized ports Currently mscc_ocelot_init_ports() will skip initializing a port when it doesn't have a phy-handle, so the ocelot->ports[port] pointer will be NULL. Take this into consideration when tearing down the driver, and add a new function ocelot_deinit_port() to the switch library, mirror of ocelot_init_port(), which needs to be called by the driver for all ports it has initialized. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 09:07:30 +08:00
for (port = 0; port < ocelot->num_phys_ports; port++)
ocelot_deinit_port(ocelot, port);
net: mscc: ocelot: move ocelot ptp clock code out of ocelot.c The Ocelot PTP clock driver had been embedded into ocelot.c driver. It had supported basic gettime64/settime64/adjtime/adjfine functions by now which were used by both Ocelot switch and Felix switch. This patch is to move current ptp clock code out of ocelot.c driver maintaining as a single ocelot_ptp.c. For futher new features implementation, the common code could be put in ocelot_ptp.c and the switch specific code should be in specific switch driver. The interrupt implementation in SoC is different between Ocelot and Felix. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20 10:46:45 +08:00
ocelot_deinit_timestamp(ocelot);
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
/* stop workqueue thread */
ocelot_deinit(ocelot);
}
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
static int felix_hwtstamp_get(struct dsa_switch *ds, int port,
struct ifreq *ifr)
{
struct ocelot *ocelot = ds->priv;
return ocelot_hwstamp_get(ocelot, port, ifr);
}
static int felix_hwtstamp_set(struct dsa_switch *ds, int port,
struct ifreq *ifr)
{
struct ocelot *ocelot = ds->priv;
return ocelot_hwstamp_set(ocelot, port, ifr);
}
static bool felix_rxtstamp(struct dsa_switch *ds, int port,
struct sk_buff *skb, unsigned int type)
{
struct skb_shared_hwtstamps *shhwtstamps;
struct ocelot *ocelot = ds->priv;
u8 *extraction = skb->data - ETH_HLEN - OCELOT_TAG_LEN;
u32 tstamp_lo, tstamp_hi;
struct timespec64 ts;
u64 tstamp, val;
ocelot_ptp_gettime64(&ocelot->ptp_info, &ts);
tstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
packing(extraction, &val, 116, 85, OCELOT_TAG_LEN, UNPACK, 0);
tstamp_lo = (u32)val;
tstamp_hi = tstamp >> 32;
if ((tstamp & 0xffffffff) < tstamp_lo)
tstamp_hi--;
tstamp = ((u64)tstamp_hi << 32) | tstamp_lo;
shhwtstamps = skb_hwtstamps(skb);
memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamps->hwtstamp = tstamp;
return false;
}
net: dsa: ocelot: fix "should it be static?" warnings Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22 20:32:45 +08:00
static bool felix_txtstamp(struct dsa_switch *ds, int port,
struct sk_buff *clone, unsigned int type)
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
{
struct ocelot *ocelot = ds->priv;
struct ocelot_port *ocelot_port = ocelot->ports[port];
net: mscc: ocelot: always pass skb clone to ocelot_port_add_txtstamp_skb Currently, ocelot switchdev passes the skb directly to the function that enqueues it to the list of skb's awaiting a TX timestamp. Whereas the felix DSA driver first clones the skb, then passes the clone to this queue. This matters because in the case of felix, the common IRQ handler, which is ocelot_get_txtstamp(), currently clones the clone, and frees the original clone. This is useless and can be simplified by using skb_complete_tx_timestamp() instead of skb_tstamp_tx(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23 19:24:20 +08:00
if (ocelot->ptp && (skb_shinfo(clone)->tx_flags & SKBTX_HW_TSTAMP) &&
ocelot_port->ptp_cmd == IFH_REW_OP_TWO_STEP_PTP) {
ocelot_port_add_txtstamp_skb(ocelot, port, clone);
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
return true;
net: mscc: ocelot: always pass skb clone to ocelot_port_add_txtstamp_skb Currently, ocelot switchdev passes the skb directly to the function that enqueues it to the list of skb's awaiting a TX timestamp. Whereas the felix DSA driver first clones the skb, then passes the clone to this queue. This matters because in the case of felix, the common IRQ handler, which is ocelot_get_txtstamp(), currently clones the clone, and frees the original clone. This is useless and can be simplified by using skb_complete_tx_timestamp() instead of skb_tstamp_tx(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23 19:24:20 +08:00
}
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
return false;
}
net: dsa: felix: support changing the MTU Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 03:55:47 +08:00
static int felix_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_set_maxlen(ocelot, port, new_mtu);
return 0;
}
static int felix_get_max_mtu(struct dsa_switch *ds, int port)
{
struct ocelot *ocelot = ds->priv;
return ocelot_get_max_mtu(ocelot, port);
}
net: dsa: felix: Wire up the ocelot cls_flower methods Export the cls_flower methods from the ocelot driver and hook them up to the DSA passthrough layer. Tables for the VCAP IS2 parameters, as well as half key packing (field offsets and lengths) need to be defined for the VSC9959 core, as they are different from Ocelot, mainly due to the different port count. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 22:31:14 +08:00
static int felix_cls_flower_add(struct dsa_switch *ds, int port,
struct flow_cls_offload *cls, bool ingress)
{
struct ocelot *ocelot = ds->priv;
return ocelot_cls_flower_replace(ocelot, port, cls, ingress);
}
static int felix_cls_flower_del(struct dsa_switch *ds, int port,
struct flow_cls_offload *cls, bool ingress)
{
struct ocelot *ocelot = ds->priv;
return ocelot_cls_flower_destroy(ocelot, port, cls, ingress);
}
static int felix_cls_flower_stats(struct dsa_switch *ds, int port,
struct flow_cls_offload *cls, bool ingress)
{
struct ocelot *ocelot = ds->priv;
return ocelot_cls_flower_stats(ocelot, port, cls, ingress);
}
net: dsa: felix: add port policers This patch is a trivial passthrough towards the ocelot library, which support port policers since commit 2c1d029a017f ("net: mscc: ocelot: Implement port policers via tc command"). Some data structure conversion between the DSA core and the Ocelot library is necessary, for policer parameters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 19:52:00 +08:00
static int felix_port_policer_add(struct dsa_switch *ds, int port,
struct dsa_mall_policer_tc_entry *policer)
{
struct ocelot *ocelot = ds->priv;
struct ocelot_policer pol = {
.rate = div_u64(policer->rate_bytes_per_sec, 1000) * 8,
net:qos: police action offloading parameter 'burst' change to the original value Since 'tcfp_burst' with TICK factor, driver side always need to recover it to the original value, this patch moves the generic calculation and recover to the 'burst' original value before offloading to device driver. Signed-off-by: Po Liu <po.liu@nxp.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 14:54:16 +08:00
.burst = policer->burst,
net: dsa: felix: add port policers This patch is a trivial passthrough towards the ocelot library, which support port policers since commit 2c1d029a017f ("net: mscc: ocelot: Implement port policers via tc command"). Some data structure conversion between the DSA core and the Ocelot library is necessary, for policer parameters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 19:52:00 +08:00
};
return ocelot_port_policer_add(ocelot, port, &pol);
}
static void felix_port_policer_del(struct dsa_switch *ds, int port)
{
struct ocelot *ocelot = ds->priv;
ocelot_port_policer_del(ocelot, port);
}
net: dsa: felix: Configure Time-Aware Scheduler via taprio offload Ocelot VSC9959 switch supports time-based egress shaping in hardware according to IEEE 802.1Qbv. This patch add support for TAS configuration on egress port of VSC9959 switch. Felix driver is an instance of Ocelot family, with a DSA front-end. The patch uses tc taprio hardware offload to setup TAS set function on felix driver. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13 10:25:09 +08:00
static int felix_port_setup_tc(struct dsa_switch *ds, int port,
enum tc_setup_type type,
void *type_data)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
if (felix->info->port_setup_tc)
return felix->info->port_setup_tc(ds, port, type, type_data);
else
return -EOPNOTSUPP;
}
net: dsa: felix: move probing to felix_vsc9959.c Felix is not actually meant to be a DSA driver only for the switch inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi / Microchip switches that are register-compatible with Ocelot and that are using in DSA mode (with an NPI Ethernet port). For the dsa_switch_ops exported by the felix driver to be generic enough to be used by other non-PCI switches, we need to move the PCI-specific probing to the low-level translation module felix_vsc9959.c. This way, other switches can have their own probing functions, as platform devices or otherwise. This patch also removes the "Felix instance table", which did not stand the test of time and is unnecessary at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 00:57:09 +08:00
const struct dsa_switch_ops felix_switch_ops = {
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
.get_tag_protocol = felix_get_tag_protocol,
.setup = felix_setup,
.teardown = felix_teardown,
.set_ageing_time = felix_set_ageing_time,
.get_strings = felix_get_strings,
.get_ethtool_stats = felix_get_ethtool_stats,
.get_sset_count = felix_get_sset_count,
.get_ts_info = felix_get_ts_info,
net: dsa: felix: Add PCS operations for PHYLINK Layerscape SoCs traditionally expose the SerDes configuration/status for Ethernet protocols (PCS for SGMII/USXGMII/10GBase-R etc etc) in a register format that is compatible with clause 22 or clause 45 (depending on SerDes protocol). Each MAC has its own internal MDIO bus on which there is one or more of these PCS's, responding to commands at a configurable PHY address. The per-port internal MDIO bus (which is just for PCSs) is totally separate and has nothing to do with the dedicated external MDIO controller (which is just for PHYs), but the register map for the MDIO controller is the same. The VSC9959 (Felix) switch instantiated in the LS1028A is integrated in hardware with the ENETC PCS of its DSA master, and reuses its MDIO controller driver, so Felix has been made to depend on it in Kconfig. +------------------------------------------------------------------------+ | +--------+ GMII (typically disabled via RCW) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5G GMII | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | +--------+ +--------+ | | | Felix | | Felix | | | | port 4 | | port 5 | | | +--------+ +--------+ | | | | +--------+ +--------+ +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | port 0 | | port 1 | | port 2 | | port 3 | | +------------------------------------------------------------------------+ | |||| SerDes | |||| |||| |||| |||| | | +--------+block | +--------------------------------------------+ | | | ENETC | | | ENETC port 2 internal MDIO bus | | | | port 0 | | | PCS PCS PCS PCS | | | | PCS | | | 0 1 2 3 | | +-----------------|------------------------------------------------------+ v v v v v v SGMII/ RGMII QSGMII/QSXGMII/4xSGMII/4x1000Base-X/4x2500Base-X USXGMII/ (bypasses 1000Base-X/ SerDes) 2500Base-X In the LS1028A SoC described above, the VSC9959 Felix switch is PF5 of the ENETC root complex, and has 2 BARs: - BAR 4: the switch's effective registers - BAR 0: the MDIO controller register map lended from ENETC port 2 (PF2), for accessing its associated PCS's. This explanation is necessary because the patch does some renaming "pci_bar" -> "switch_pci_bar" for clarity, which would otherwise appear a bit obtuse. The fact that the internal MDIO bus is "borrowed" is relevant because the register map is found in PF5 (the switch) but it triggers an access fault if PF2 (the ENETC DSA master) is not enabled. This is not treated in any way (and I don't think it can be treated). All of this is so SoC-specific, that it was contained as much as possible in the platform-integration file felix_vsc9959.c. We need to parse and pre-validate the device tree because of 2 reasons: - The PHY mode (SerDes protocol) cannot change at runtime due to SoC design. - There is a circular dependency in that we need to know what clause the PCS speaks in order to find it on the internal MDIO bus. But the clause of the PCS depends on what phy-mode it is configured for. The goal of this patch is to make steps towards removing the bootloader dependency for SGMII PCS pre-configuration, as well as to add support for monitoring the in-band SGMII AN between the PCS and the system-side link partner (PHY or other MAC). In practice the bootloader dependency is not completely removed. U-Boot pre-programs the PHY address at which each PCS can be found on the internal MDIO bus (MDEV_PORT). This is needed because the PCS of each port has the same out-of-reset PHY address of zero. The SerDes register for changing MDEV_PORT is pretty deep in the SoC (outside the addresses of the ENETC PCI BARs) and therefore inaccessible to us from here. Felix VSC9959 and Ocelot VSC7514 are integrated very differently in their respective SoCs, and for that reason Felix does not use the Ocelot core library for PHYLINK. On one hand we don't want to impose the fixed phy-mode limitation to Ocelot, and on the other hand Felix doesn't need to force the MAC link speed the way Ocelot does, since the MAC is connected to the PCS through a fixed GMII, and the PCS is the one who does the rate adaptation at lower link speeds, which the MAC does not even need to know about. In fact changing the GMII speed for Felix irrecoverably breaks transmission through that port until a reset. The pair with ENETC port 3 and Felix port 5 is optional and doesn't support tagging. When we enable it, swp5 is a regular slave port, albeit an internal one. The trouble is that it doesn't work, and that is because the DSA PHYLIB adaptation layer doesn't treat fixed-link slave ports. So that is yet another reason for wanting to convert Felix to the native PHYLINK API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 09:34:17 +08:00
.phylink_validate = felix_phylink_validate,
.phylink_mac_config = felix_phylink_mac_config,
.phylink_mac_link_down = felix_phylink_mac_link_down,
.phylink_mac_link_up = felix_phylink_mac_link_up,
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
.port_enable = felix_port_enable,
.port_disable = felix_port_disable,
.port_fdb_dump = felix_fdb_dump,
.port_fdb_add = felix_fdb_add,
.port_fdb_del = felix_fdb_del,
net: dsa: felix: call port mdb operations from ocelot This adds the mdb hooks in felix and exports the mdb functions from ocelot. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21 19:46:01 +08:00
.port_mdb_prepare = felix_mdb_prepare,
.port_mdb_add = felix_mdb_add,
.port_mdb_del = felix_mdb_del,
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
.port_bridge_join = felix_bridge_join,
.port_bridge_leave = felix_bridge_leave,
.port_stp_state_set = felix_bridge_stp_state_set,
.port_vlan_prepare = felix_vlan_prepare,
.port_vlan_filtering = felix_vlan_filtering,
.port_vlan_add = felix_vlan_add,
.port_vlan_del = felix_vlan_del,
net: dsa: ocelot: add hardware timestamping support for Felix This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 16:23:18 +08:00
.port_hwtstamp_get = felix_hwtstamp_get,
.port_hwtstamp_set = felix_hwtstamp_set,
.port_rxtstamp = felix_rxtstamp,
.port_txtstamp = felix_txtstamp,
net: dsa: felix: support changing the MTU Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 03:55:47 +08:00
.port_change_mtu = felix_change_mtu,
.port_max_mtu = felix_get_max_mtu,
net: dsa: felix: add port policers This patch is a trivial passthrough towards the ocelot library, which support port policers since commit 2c1d029a017f ("net: mscc: ocelot: Implement port policers via tc command"). Some data structure conversion between the DSA core and the Ocelot library is necessary, for policer parameters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 19:52:00 +08:00
.port_policer_add = felix_port_policer_add,
.port_policer_del = felix_port_policer_del,
net: dsa: felix: Wire up the ocelot cls_flower methods Export the cls_flower methods from the ocelot driver and hook them up to the DSA passthrough layer. Tables for the VCAP IS2 parameters, as well as half key packing (field offsets and lengths) need to be defined for the VSC9959 core, as they are different from Ocelot, mainly due to the different port count. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 22:31:14 +08:00
.cls_flower_add = felix_cls_flower_add,
.cls_flower_del = felix_cls_flower_del,
.cls_flower_stats = felix_cls_flower_stats,
net: dsa: felix: replace tabs with spaces Over the time, some patches have introduced structures aligned with spaces, near structures aligned with tabs. Fix the inconsistencies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 18:57:49 +08:00
.port_setup_tc = felix_port_setup_tc,
net: dsa: ocelot: add driver for Felix switch family This supports an Ethernet switching core from Vitesse / Microsemi / Microchip (VSC9959) which is part of the Ocelot family (a brand name), and whose code name is Felix. The switch can be (and is) integrated on different SoCs as a PCIe endpoint device. The functionality is provided by the core of the Ocelot switch driver (drivers/net/ethernet/mscc). In this regard, the current driver is an instance of Microsemi's Ocelot core driver, with a DSA front-end. It inherits its name from VSC9959's code name, to distinguish itself from the switchdev ocelot driver. The patch adds the logic for probing a PCI device and defines the register map for the VSC9959 switch core, since it has some differences in register addresses and bitfield mappings compared to the other Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514). The Felix driver declares the register map as part of the "instance table". Currently the VSC9959 inside NXP LS1028A is the only instance, but presumably it can support other switches in the Ocelot family, when used in DSA mode (Linux running on the external CPU, and not on the embedded MIPS). In a few cases, some h/w operations have to be done differently on VSC9959 due to missing bitfields. This is the case for the switch core reset and init. Because for this operation Ocelot uses some bits that are not present on Felix, the latter has to use a register from the global registers block (GCB) instead. Although it is a PCI driver, it relies on DT bindings for compatibility with DSA (CPU port link, PHY library). It does not have any custom device tree bindings, since we would like to minimize its dependency on device tree though. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14 23:03:30 +08:00
};
net: mscc: ocelot: introduce conversion helpers between port and netdev Since the mscc_ocelot_switch_lib is common between a pure switchdev and a DSA driver, the procedure of retrieving a net_device for a certain port index differs, as those are registered by their individual front-ends. Up to now that has been dealt with by always passing the port index to the switch library, but now, we're going to need to work with net_device pointers from the tc-flower offload, for things like indev, or mirred. It is not desirable to refactor that, so let's make sure that the flower offload core has the ability to translate between a net_device and a port index properly. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 20:02:21 +08:00
struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
{
struct felix *felix = ocelot_to_felix(ocelot);
struct dsa_switch *ds = felix->ds;
if (!dsa_is_user_port(ds, port))
return NULL;
return dsa_to_port(ds, port)->slave;
}
int felix_netdev_to_port(struct net_device *dev)
{
struct dsa_port *dp;
dp = dsa_port_from_netdev(dev);
if (IS_ERR(dp))
return -EINVAL;
return dp->index;
}
Reference in New Issue Copy Permalink