linux/tools/perf/util/thread.c

480 lines
11 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <errno.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <linux/kernel.h>
#include <linux/zalloc.h>
#include "dso.h"
#include "session.h"
#include "thread.h"
#include "thread-stack.h"
#include "debug.h"
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
#include "namespaces.h"
#include "comm.h"
#include "map.h"
#include "symbol.h"
#include "unwind.h"
perf tools: Speed up report for perf compiled with linwunwind When compiled with libunwind, perf does some preparatory work when processing side-band events. This is not needed when report actually don't unwind dwarf callchains, so it's disabled with dwarf_callchain_users bool. However we could move that check to higher level and shield more unwanted code for normal report processing, giving us following speed up on kernel build profile: Before: $ perf record make -j40 ... $ ll ../../perf.data -rw-------. 1 jolsa jolsa 461783932 Apr 26 09:11 perf.data $ perf stat -e cycles:u,instructions:u perf report -i perf.data > out Performance counter stats for 'perf report -i perf.data': 78,669,920,155 cycles:u 99,076,431,951 instructions:u # 1.26 insn per cycle 55.382823668 seconds time elapsed 27.512341000 seconds user 27.712871000 seconds sys After: $ perf stat -e cycles:u,instructions:u perf report -i perf.data > out Performance counter stats for 'perf report -i perf.data': 59,626,798,904 cycles:u 88,583,575,849 instructions:u # 1.49 insn per cycle 21.296935559 seconds time elapsed 20.010191000 seconds user 1.202935000 seconds sys The speed is higher with profile having many side-band events, because these trigger libunwind preparatory code. This does not apply for perf compiled with libdw for dwarf unwind, only for build with libunwind. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190426073804.17238-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-26 15:38:04 +08:00
#include "callchain.h"
#include <api/fs/fs.h>
int thread__init_maps(struct thread *thread, struct machine *machine)
{
pid_t pid = thread->pid_;
if (pid == thread->tid || pid == -1) {
thread->maps = maps__new(machine);
} else {
struct thread *leader = __machine__findnew_thread(machine, pid, pid);
if (leader) {
thread->maps = maps__get(leader->maps);
thread__put(leader);
}
}
return thread->maps ? 0 : -1;
}
struct thread *thread__new(pid_t pid, pid_t tid)
{
char *comm_str;
struct comm *comm;
struct thread *thread = zalloc(sizeof(*thread));
if (thread != NULL) {
thread->pid_ = pid;
thread->tid = tid;
thread->ppid = -1;
thread->cpu = -1;
thread->guest_cpu = -1;
thread->lbr_stitch_enable = false;
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
INIT_LIST_HEAD(&thread->namespaces_list);
INIT_LIST_HEAD(&thread->comm_list);
init_rwsem(&thread->namespaces_lock);
init_rwsem(&thread->comm_lock);
comm_str = malloc(32);
if (!comm_str)
goto err_thread;
snprintf(comm_str, 32, ":%d", tid);
comm = comm__new(comm_str, 0, false);
free(comm_str);
if (!comm)
goto err_thread;
list_add(&comm->list, &thread->comm_list);
refcount_set(&thread->refcnt, 1);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
RB_CLEAR_NODE(&thread->rb_node);
/* Thread holds first ref to nsdata. */
thread->nsinfo = nsinfo__new(pid);
perf tools: Support 'srccode' output When looking at PT or brstackinsn traces with 'perf script' it can be very useful to see the source code. This adds a simple facility to print them with 'perf script', if the information is available through dwarf % perf record ... % perf script -F insn,ip,sym,srccode ... 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004b3 main 6 v++; % perf record -b ... % perf script -F insn,ip,sym,srccode,brstackinsn ... main+22: 0000000000400543 insn: e8 ca ff ff ff # PRED |18 f1(); f1: 0000000000400512 insn: 55 |10 { 0000000000400513 insn: 48 89 e5 0000000000400516 insn: b8 00 00 00 00 |11 f2(); 000000000040051b insn: e8 d6 ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; 0000000000400500 insn: 8b 0d 2a 0b 20 00 0000000000400506 insn: 99 0000000000400507 insn: f7 f9 0000000000400509 insn: 89 05 29 0b 20 00 000000000040050f insn: 90 |7 } 0000000000400510 insn: 5d 0000000000400511 insn: c3 # PRED f1+14: 0000000000400520 insn: b8 00 00 00 00 |12 f2(); 0000000000400525 insn: e8 cc ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; Not supported for callchains currently, would need some layout changes there. Committer notes: Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this warning: In file included from util/srccode.c:19:0: /usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp] #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> ^~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181204001848.24769-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-04 08:18:48 +08:00
srccode_state_init(&thread->srccode_state);
}
return thread;
err_thread:
free(thread);
return NULL;
}
void thread__delete(struct thread *thread)
{
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
struct namespaces *namespaces, *tmp_namespaces;
struct comm *comm, *tmp_comm;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
BUG_ON(!RB_EMPTY_NODE(&thread->rb_node));
thread_stack__free(thread);
if (thread->maps) {
maps__put(thread->maps);
thread->maps = NULL;
}
down_write(&thread->namespaces_lock);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
list_for_each_entry_safe(namespaces, tmp_namespaces,
&thread->namespaces_list, list) {
list_del_init(&namespaces->list);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
namespaces__free(namespaces);
}
up_write(&thread->namespaces_lock);
down_write(&thread->comm_lock);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
list_for_each_entry_safe(comm, tmp_comm, &thread->comm_list, list) {
list_del_init(&comm->list);
comm__free(comm);
}
up_write(&thread->comm_lock);
nsinfo__zput(thread->nsinfo);
perf tools: Support 'srccode' output When looking at PT or brstackinsn traces with 'perf script' it can be very useful to see the source code. This adds a simple facility to print them with 'perf script', if the information is available through dwarf % perf record ... % perf script -F insn,ip,sym,srccode ... 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004c6 main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004cd main 5 for (i = 0; i < 10000000; i++) 4004b3 main 6 v++; % perf record -b ... % perf script -F insn,ip,sym,srccode,brstackinsn ... main+22: 0000000000400543 insn: e8 ca ff ff ff # PRED |18 f1(); f1: 0000000000400512 insn: 55 |10 { 0000000000400513 insn: 48 89 e5 0000000000400516 insn: b8 00 00 00 00 |11 f2(); 000000000040051b insn: e8 d6 ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; 0000000000400500 insn: 8b 0d 2a 0b 20 00 0000000000400506 insn: 99 0000000000400507 insn: f7 f9 0000000000400509 insn: 89 05 29 0b 20 00 000000000040050f insn: 90 |7 } 0000000000400510 insn: 5d 0000000000400511 insn: c3 # PRED f1+14: 0000000000400520 insn: b8 00 00 00 00 |12 f2(); 0000000000400525 insn: e8 cc ff ff ff # PRED f2: 00000000004004f6 insn: 55 |5 { 00000000004004f7 insn: 48 89 e5 00000000004004fa insn: 8b 05 2c 0b 20 00 |6 c = a / b; Not supported for callchains currently, would need some layout changes there. Committer notes: Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this warning: In file included from util/srccode.c:19:0: /usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp] #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> ^~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181204001848.24769-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-04 08:18:48 +08:00
srccode_state_free(&thread->srccode_state);
exit_rwsem(&thread->namespaces_lock);
exit_rwsem(&thread->comm_lock);
thread__free_stitch_list(thread);
free(thread);
}
struct thread *thread__get(struct thread *thread)
{
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
if (thread)
refcount_inc(&thread->refcnt);
return thread;
}
void thread__put(struct thread *thread)
{
if (thread && refcount_dec_and_test(&thread->refcnt)) {
/*
perf thread: Allow references to thread objects after machine__exit() Threads are created when we either synthesize PERF_RECORD_FORK events for pre-existing threads or when we receive PERF_RECORD_FORK events from the kernel as new threads get created. We then keep them in machine->threads[].entries rb trees till when we receive a PERF_RECORD_EXIT, i.e. that thread terminated. The thread object has a reference count that is grabbed when, for instance, we keep that thread referenced in struct hist_entry, in 'perf report' and 'perf top'. When we receive a PERF_RECORD_EXIT we remove the thread object from the rb tree and move it to the corresponding machine->threads[].dead list, then we do a thread__put(), dropping the reference we had for keeping it in the rb tree. In thread__put() we were assuming that when the reference count hit zero we should remove it from the dead list by simply doing a list_del_init(&thread->node). That works well when all the thread lifetime is during the machine that has the list heads lifetime, since we know that we can do the list_del_init() and it will update the 'dead' list_head. But in 'perf sched lat' we were doing: machine__new() (via perf_session__new) process events, grabbing refcounts to keep those thread objects in 'perf sched' local data structures. machine__exit() (via perf_session__delete) which would delete the 'dead' list heads. And then doing the final thread__put() for the refcounts 'perf sched' rightfully obtained for keeping those thread object references. b00m, since thread__put() would do the list_del_init() touching a dead dead list head. Fix it by removing all the dead threads from machine->threads[].dead at machine__exit(), since whatever is there should have refcounts taken by things like 'perf sched lat', and make thread__put() check if the thread is in a linked list before removing it from that list. Reported-by: Wei Li <liwei391@huawei.com> Link: https://lkml.kernel.org/r/20190508143648.8153-1-liwei391@huawei.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhipeng Xie <xiezhipeng1@huawei.com> Link: https://lkml.kernel.org/r/20190704194355.GI10740@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-05 23:11:35 +08:00
* Remove it from the dead threads list, as last reference is
* gone, if it is in a dead threads list.
*
* We may not be there anymore if say, the machine where it was
* stored was already deleted, so we already removed it from
* the dead threads and some other piece of code still keeps a
* reference.
*
* This is what 'perf sched' does and finally drops it in
* perf_sched__lat(), where it calls perf_sched__read_events(),
* that processes the events by creating a session and deleting
* it, which ends up destroying the list heads for the dead
* threads, but before it does that it removes all threads from
* it using list_del_init().
*
* So we need to check here if it is in a dead threads list and
* if so, remove it before finally deleting the thread, to avoid
* an use after free situation.
*/
perf thread: Allow references to thread objects after machine__exit() Threads are created when we either synthesize PERF_RECORD_FORK events for pre-existing threads or when we receive PERF_RECORD_FORK events from the kernel as new threads get created. We then keep them in machine->threads[].entries rb trees till when we receive a PERF_RECORD_EXIT, i.e. that thread terminated. The thread object has a reference count that is grabbed when, for instance, we keep that thread referenced in struct hist_entry, in 'perf report' and 'perf top'. When we receive a PERF_RECORD_EXIT we remove the thread object from the rb tree and move it to the corresponding machine->threads[].dead list, then we do a thread__put(), dropping the reference we had for keeping it in the rb tree. In thread__put() we were assuming that when the reference count hit zero we should remove it from the dead list by simply doing a list_del_init(&thread->node). That works well when all the thread lifetime is during the machine that has the list heads lifetime, since we know that we can do the list_del_init() and it will update the 'dead' list_head. But in 'perf sched lat' we were doing: machine__new() (via perf_session__new) process events, grabbing refcounts to keep those thread objects in 'perf sched' local data structures. machine__exit() (via perf_session__delete) which would delete the 'dead' list heads. And then doing the final thread__put() for the refcounts 'perf sched' rightfully obtained for keeping those thread object references. b00m, since thread__put() would do the list_del_init() touching a dead dead list head. Fix it by removing all the dead threads from machine->threads[].dead at machine__exit(), since whatever is there should have refcounts taken by things like 'perf sched lat', and make thread__put() check if the thread is in a linked list before removing it from that list. Reported-by: Wei Li <liwei391@huawei.com> Link: https://lkml.kernel.org/r/20190508143648.8153-1-liwei391@huawei.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhipeng Xie <xiezhipeng1@huawei.com> Link: https://lkml.kernel.org/r/20190704194355.GI10740@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-05 23:11:35 +08:00
if (!list_empty(&thread->node))
list_del_init(&thread->node);
thread__delete(thread);
}
}
static struct namespaces *__thread__namespaces(const struct thread *thread)
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
{
if (list_empty(&thread->namespaces_list))
return NULL;
return list_first_entry(&thread->namespaces_list, struct namespaces, list);
}
struct namespaces *thread__namespaces(struct thread *thread)
{
struct namespaces *ns;
down_read(&thread->namespaces_lock);
ns = __thread__namespaces(thread);
up_read(&thread->namespaces_lock);
return ns;
}
static int __thread__set_namespaces(struct thread *thread, u64 timestamp,
struct perf_record_namespaces *event)
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
{
struct namespaces *new, *curr = __thread__namespaces(thread);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
new = namespaces__new(event);
if (!new)
return -ENOMEM;
list_add(&new->list, &thread->namespaces_list);
if (timestamp && curr) {
/*
* setns syscall must have changed few or all the namespaces
* of this thread. Update end time for the namespaces
* previously used.
*/
curr = list_next_entry(new, list);
curr->end_time = timestamp;
}
return 0;
}
int thread__set_namespaces(struct thread *thread, u64 timestamp,
struct perf_record_namespaces *event)
{
int ret;
down_write(&thread->namespaces_lock);
ret = __thread__set_namespaces(thread, timestamp, event);
up_write(&thread->namespaces_lock);
return ret;
}
struct comm *thread__comm(const struct thread *thread)
{
if (list_empty(&thread->comm_list))
return NULL;
return list_first_entry(&thread->comm_list, struct comm, list);
}
struct comm *thread__exec_comm(const struct thread *thread)
{
perf db-export: Fix thread__exec_comm() Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08 14:48:23 +08:00
struct comm *comm, *last = NULL, *second_last = NULL;
list_for_each_entry(comm, &thread->comm_list, list) {
if (comm->exec)
return comm;
perf db-export: Fix thread__exec_comm() Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08 14:48:23 +08:00
second_last = last;
last = comm;
}
perf db-export: Fix thread__exec_comm() Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08 14:48:23 +08:00
/*
* 'last' with no start time might be the parent's comm of a synthesized
* thread (created by processing a synthesized fork event). For a main
* thread, that is very probably wrong. Prefer a later comm to avoid
* that case.
*/
if (second_last && !last->start && thread->pid_ == thread->tid)
return second_last;
return last;
}
static int ____thread__set_comm(struct thread *thread, const char *str,
u64 timestamp, bool exec)
{
struct comm *new, *curr = thread__comm(thread);
/* Override the default :tid entry */
if (!thread->comm_set) {
int err = comm__override(curr, str, timestamp, exec);
if (err)
return err;
} else {
new = comm__new(str, timestamp, exec);
if (!new)
return -ENOMEM;
list_add(&new->list, &thread->comm_list);
if (exec)
unwind__flush_access(thread->maps);
}
thread->comm_set = true;
return 0;
}
int __thread__set_comm(struct thread *thread, const char *str, u64 timestamp,
bool exec)
{
int ret;
down_write(&thread->comm_lock);
ret = ____thread__set_comm(thread, str, timestamp, exec);
up_write(&thread->comm_lock);
return ret;
}
int thread__set_comm_from_proc(struct thread *thread)
{
char path[64];
char *comm = NULL;
size_t sz;
int err = -1;
if (!(snprintf(path, sizeof(path), "%d/task/%d/comm",
thread->pid_, thread->tid) >= (int)sizeof(path)) &&
procfs__read_str(path, &comm, &sz) == 0) {
comm[sz - 1] = '\0';
err = thread__set_comm(thread, comm, 0);
}
return err;
}
static const char *__thread__comm_str(const struct thread *thread)
{
const struct comm *comm = thread__comm(thread);
if (!comm)
return NULL;
return comm__str(comm);
}
const char *thread__comm_str(struct thread *thread)
{
const char *str;
down_read(&thread->comm_lock);
str = __thread__comm_str(thread);
up_read(&thread->comm_lock);
return str;
}
/* CHECKME: it should probably better return the max comm len from its comm list */
int thread__comm_len(struct thread *thread)
perf tools: Bind callchains to the first sort dimension column Currently, the callchains are displayed using a constant left margin. So depending on the current sort dimension configuration, callchains may appear to be well attached to the first sort dimension column field which is mostly the case, except when the first dimension of sorting is done by comm, because these are right aligned. This patch binds the callchain to the first letter in the first column, whatever type of column it is (dso, comm, symbol). Before: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent After: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent Also, for clarity, we don't put anymore the callchain as is but: - If we have a top level ancestor in the callchain, start it with a first ascii hook. Before: 0.80% perf [kernel] [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] After: 0.80% perf [kernel] [k] __lock_acquire | --- __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] - Otherwise, if we have several top level ancestors, then display these like we did before: 1.69% Xorg | |--21.21%-- vread_hpet | 0x7fffd85b46fc | 0x7fffd85b494d | 0x7f4fafb4e54d | |--15.15%-- exaOffscreenAlloc | |--9.09%-- I830WaitLpRing Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 05:23:23 +08:00
{
if (!thread->comm_len) {
const char *comm = thread__comm_str(thread);
if (!comm)
perf tools: Bind callchains to the first sort dimension column Currently, the callchains are displayed using a constant left margin. So depending on the current sort dimension configuration, callchains may appear to be well attached to the first sort dimension column field which is mostly the case, except when the first dimension of sorting is done by comm, because these are right aligned. This patch binds the callchain to the first letter in the first column, whatever type of column it is (dso, comm, symbol). Before: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent After: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent Also, for clarity, we don't put anymore the callchain as is but: - If we have a top level ancestor in the callchain, start it with a first ascii hook. Before: 0.80% perf [kernel] [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] After: 0.80% perf [kernel] [k] __lock_acquire | --- __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] - Otherwise, if we have several top level ancestors, then display these like we did before: 1.69% Xorg | |--21.21%-- vread_hpet | 0x7fffd85b46fc | 0x7fffd85b494d | 0x7f4fafb4e54d | |--15.15%-- exaOffscreenAlloc | |--9.09%-- I830WaitLpRing Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 05:23:23 +08:00
return 0;
thread->comm_len = strlen(comm);
perf tools: Bind callchains to the first sort dimension column Currently, the callchains are displayed using a constant left margin. So depending on the current sort dimension configuration, callchains may appear to be well attached to the first sort dimension column field which is mostly the case, except when the first dimension of sorting is done by comm, because these are right aligned. This patch binds the callchain to the first letter in the first column, whatever type of column it is (dso, comm, symbol). Before: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent After: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent Also, for clarity, we don't put anymore the callchain as is but: - If we have a top level ancestor in the callchain, start it with a first ascii hook. Before: 0.80% perf [kernel] [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] After: 0.80% perf [kernel] [k] __lock_acquire | --- __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] - Otherwise, if we have several top level ancestors, then display these like we did before: 1.69% Xorg | |--21.21%-- vread_hpet | 0x7fffd85b46fc | 0x7fffd85b494d | 0x7f4fafb4e54d | |--15.15%-- exaOffscreenAlloc | |--9.09%-- I830WaitLpRing Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 05:23:23 +08:00
}
return thread->comm_len;
perf tools: Bind callchains to the first sort dimension column Currently, the callchains are displayed using a constant left margin. So depending on the current sort dimension configuration, callchains may appear to be well attached to the first sort dimension column field which is mostly the case, except when the first dimension of sorting is done by comm, because these are right aligned. This patch binds the callchain to the first letter in the first column, whatever type of column it is (dso, comm, symbol). Before: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent After: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent Also, for clarity, we don't put anymore the callchain as is but: - If we have a top level ancestor in the callchain, start it with a first ascii hook. Before: 0.80% perf [kernel] [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] After: 0.80% perf [kernel] [k] __lock_acquire | --- __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] - Otherwise, if we have several top level ancestors, then display these like we did before: 1.69% Xorg | |--21.21%-- vread_hpet | 0x7fffd85b46fc | 0x7fffd85b494d | 0x7f4fafb4e54d | |--15.15%-- exaOffscreenAlloc | |--9.09%-- I830WaitLpRing Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 05:23:23 +08:00
}
size_t thread__fprintf(struct thread *thread, FILE *fp)
{
return fprintf(fp, "Thread %d %s\n", thread->tid, thread__comm_str(thread)) +
maps__fprintf(thread->maps, fp);
}
int thread__insert_map(struct thread *thread, struct map *map)
perf tools: Use rb_tree for maps Threads can have many and kernel modules will be represented as a tree of maps as well. Ah, and for a perf.data with 146607 samples: Before: [root@doppio ~]# perf stat -r 5 perf report > /dev/null Performance counter stats for 'perf report' (5 runs): 699.823680 task-clock-msecs # 0.991 CPUs ( +- 0.454% ) 74 context-switches # 0.000 M/sec ( +- 1.709% ) 2 CPU-migrations # 0.000 M/sec ( +- 17.008% ) 23114 page-faults # 0.033 M/sec ( +- 0.000% ) 1381257019 cycles # 1973.721 M/sec ( +- 0.290% ) 1456894438 instructions # 1.055 IPC ( +- 0.007% ) 18779818 cache-references # 26.835 M/sec ( +- 0.380% ) 641799 cache-misses # 0.917 M/sec ( +- 1.200% ) 0.705972729 seconds time elapsed ( +- 0.501% ) [root@doppio ~]# After Performance counter stats for 'perf report' (5 runs): 691.261451 task-clock-msecs # 0.993 CPUs ( +- 0.307% ) 72 context-switches # 0.000 M/sec ( +- 0.829% ) 6 CPU-migrations # 0.000 M/sec ( +- 18.409% ) 23127 page-faults # 0.033 M/sec ( +- 0.000% ) 1366395876 cycles # 1976.670 M/sec ( +- 0.153% ) 1443136016 instructions # 1.056 IPC ( +- 0.012% ) 17956402 cache-references # 25.976 M/sec ( +- 0.325% ) 661924 cache-misses # 0.958 M/sec ( +- 1.335% ) 0.696127275 seconds time elapsed ( +- 0.377% ) I.e. we see some speedup too. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> LKML-Reference: <20090928174846.GA3361@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-29 01:48:46 +08:00
{
int ret;
ret = unwind__prepare_access(thread->maps, map, NULL);
if (ret)
return ret;
maps__fixup_overlappings(thread->maps, map, stderr);
maps__insert(thread->maps, map);
return 0;
}
static int __thread__prepare_access(struct thread *thread)
{
bool initialized = false;
int err = 0;
struct maps *maps = thread->maps;
struct map *map;
down_read(&maps->lock);
maps__for_each_entry(maps, map) {
err = unwind__prepare_access(thread->maps, map, &initialized);
if (err || initialized)
break;
}
up_read(&maps->lock);
return err;
}
static int thread__prepare_access(struct thread *thread)
{
int err = 0;
perf tools: Speed up report for perf compiled with linwunwind When compiled with libunwind, perf does some preparatory work when processing side-band events. This is not needed when report actually don't unwind dwarf callchains, so it's disabled with dwarf_callchain_users bool. However we could move that check to higher level and shield more unwanted code for normal report processing, giving us following speed up on kernel build profile: Before: $ perf record make -j40 ... $ ll ../../perf.data -rw-------. 1 jolsa jolsa 461783932 Apr 26 09:11 perf.data $ perf stat -e cycles:u,instructions:u perf report -i perf.data > out Performance counter stats for 'perf report -i perf.data': 78,669,920,155 cycles:u 99,076,431,951 instructions:u # 1.26 insn per cycle 55.382823668 seconds time elapsed 27.512341000 seconds user 27.712871000 seconds sys After: $ perf stat -e cycles:u,instructions:u perf report -i perf.data > out Performance counter stats for 'perf report -i perf.data': 59,626,798,904 cycles:u 88,583,575,849 instructions:u # 1.49 insn per cycle 21.296935559 seconds time elapsed 20.010191000 seconds user 1.202935000 seconds sys The speed is higher with profile having many side-band events, because these trigger libunwind preparatory code. This does not apply for perf compiled with libdw for dwarf unwind, only for build with libunwind. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190426073804.17238-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-26 15:38:04 +08:00
if (dwarf_callchain_users)
err = __thread__prepare_access(thread);
return err;
}
static int thread__clone_maps(struct thread *thread, struct thread *parent, bool do_maps_clone)
{
/* This is new thread, we share map groups for process. */
if (thread->pid_ == parent->pid_)
return thread__prepare_access(thread);
if (thread->maps == parent->maps) {
pr_debug("broken map groups on thread %d/%d parent %d/%d\n",
thread->pid_, thread->tid, parent->pid_, parent->tid);
return 0;
}
/* But this one is new process, copy maps. */
return do_maps_clone ? maps__clone(thread, parent->maps) : 0;
}
int thread__fork(struct thread *thread, struct thread *parent, u64 timestamp, bool do_maps_clone)
{
if (parent->comm_set) {
const char *comm = thread__comm_str(parent);
int err;
if (!comm)
return -ENOMEM;
err = thread__set_comm(thread, comm, timestamp);
if (err)
return err;
}
thread->ppid = parent->tid;
return thread__clone_maps(thread, parent, do_maps_clone);
}
void thread__find_cpumode_addr_location(struct thread *thread, u64 addr,
struct addr_location *al)
{
size_t i;
const u8 cpumodes[] = {
PERF_RECORD_MISC_USER,
PERF_RECORD_MISC_KERNEL,
PERF_RECORD_MISC_GUEST_USER,
PERF_RECORD_MISC_GUEST_KERNEL
};
for (i = 0; i < ARRAY_SIZE(cpumodes); i++) {
thread__find_symbol(thread, cpumodes[i], addr, al);
if (al->map)
break;
}
}
struct thread *thread__main_thread(struct machine *machine, struct thread *thread)
{
if (thread->pid_ == thread->tid)
return thread__get(thread);
if (thread->pid_ == -1)
return NULL;
return machine__find_thread(machine, thread->pid_, thread->pid_);
}
int thread__memcpy(struct thread *thread, struct machine *machine,
void *buf, u64 ip, int len, bool *is64bit)
{
u8 cpumode = PERF_RECORD_MISC_USER;
struct addr_location al;
long offset;
if (machine__kernel_ip(machine, ip))
cpumode = PERF_RECORD_MISC_KERNEL;
if (!thread__find_map(thread, cpumode, ip, &al) || !al.map->dso ||
al.map->dso->data.status == DSO_DATA_STATUS_ERROR ||
map__load(al.map) < 0)
return -1;
offset = al.map->map_ip(al.map, ip);
if (is64bit)
*is64bit = al.map->dso->is_64_bit;
return dso__data_read_offset(al.map->dso, machine, offset, buf, len);
}
perf callchain: Stitch LBR call stack In LBR call stack mode, the depth of reconstructed LBR call stack limits to the number of LBR registers. For example, on skylake, the depth of reconstructed LBR call stack is always <= 32. # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 6K of event 'cycles' # Event count (approx.): 6487119731 # # Children Self Command Shared Object Symbol # ........ ........ ............... .................. # ................................ 99.97% 99.97% tchain_edit tchain_edit [.] f43 | --99.64%--f11 f12 f13 f14 f15 f16 f17 f18 f19 f20 f21 f22 f23 f24 f25 f26 f27 f28 f29 f30 f31 f32 f33 f34 f35 f36 f37 f38 f39 f40 f41 f42 f43 For a call stack which is deeper than LBR limit, HW will overwrite the LBR register with oldest branch. Only partial call stacks can be reconstructed. However, the overwritten LBRs may still be retrieved from previous sample. At that moment, HW hasn't overwritten the LBR registers yet. Perf tools can stitch those overwritten LBRs on current call stacks to get a more complete call stack. To determine if LBRs can be stitched, perf tools need to compare current sample with previous sample. - They should have identical LBR records (Same from, to and flags values, and the same physical index of LBR registers). - The searching starts from the base-of-stack of current sample. Once perf determines to stitch the previous LBRs, the corresponding LBR cursor nodes will be copied to 'lists'. The 'lists' is to track the LBR cursor nodes which are going to be stitched. When the stitching is over, the nodes will not be freed immediately. They will be moved to 'free_lists'. Next stitching may reuse the space. Both 'lists' and 'free_lists' will be freed when all samples are processed. Committer notes: Fix the intel-pt.c initialization of the union with 'struct branch_flags', that breaks the build with its unnamed union on older gcc versions. Uninline thread__free_stitch_list(), as it grew big and started dragging includes to thread.h, so move it to thread.c where what it needs in terms of headers are already there. This fixes the build in several systems such as debian:experimental when cross building to the MIPS32 architecture, i.e. in the other cases what was needed was being included by sheer luck. In file included from builtin-sched.c:11: util/thread.h: In function 'thread__free_stitch_list': util/thread.h:169:3: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration] 169 | free(pos); | ^~~~ util/thread.h:169:3: error: incompatible implicit declaration of built-in function 'free' [-Werror] util/thread.h:19:1: note: include '<stdlib.h>' or provide a declaration of 'free' 18 | #include "callchain.h" +++ |+#include <stdlib.h> 19 | util/thread.h:174:3: error: incompatible implicit declaration of built-in function 'free' [-Werror] 174 | free(pos); | ^~~~ util/thread.h:174:3: note: include '<stdlib.h>' or provide a declaration of 'free' Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200319202517.23423-13-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-20 04:25:12 +08:00
void thread__free_stitch_list(struct thread *thread)
{
struct lbr_stitch *lbr_stitch = thread->lbr_stitch;
struct stitch_list *pos, *tmp;
if (!lbr_stitch)
return;
list_for_each_entry_safe(pos, tmp, &lbr_stitch->lists, node) {
list_del_init(&pos->node);
free(pos);
}
list_for_each_entry_safe(pos, tmp, &lbr_stitch->free_lists, node) {
list_del_init(&pos->node);
free(pos);
}
zfree(&lbr_stitch->prev_lbr_cursor);
zfree(&thread->lbr_stitch);
}