linux/drivers/gpio/gpio-altera.c

374 lines
10 KiB
C
Raw Normal View History

drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
/*
* Copyright (C) 2013 Altera Corporation
* Based on gpio-mpc8xxx.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#define ALTERA_GPIO_MAX_NGPIO 32
#define ALTERA_GPIO_DATA 0x0
#define ALTERA_GPIO_DIR 0x4
#define ALTERA_GPIO_IRQ_MASK 0x8
#define ALTERA_GPIO_EDGE_CAP 0xc
/**
* struct altera_gpio_chip
* @mmchip : memory mapped chip structure.
* @gpio_lock : synchronization lock so that new irq/set/get requests
will be blocked until the current one completes.
* @interrupt_trigger : specifies the hardware configured IRQ trigger type
(rising, falling, both, high)
* @mapped_irq : kernel mapped irq number.
*/
struct altera_gpio_chip {
struct of_mm_gpio_chip mmchip;
spinlock_t gpio_lock;
int interrupt_trigger;
int mapped_irq;
};
static void altera_gpio_irq_unmask(struct irq_data *d)
{
struct altera_gpio_chip *altera_gc;
struct of_mm_gpio_chip *mm_gc;
unsigned long flags;
u32 intmask;
altera_gc = irq_data_get_irq_chip_data(d);
mm_gc = &altera_gc->mmchip;
spin_lock_irqsave(&altera_gc->gpio_lock, flags);
intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
/* Set ALTERA_GPIO_IRQ_MASK bit to unmask */
intmask |= BIT(irqd_to_hwirq(d));
writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
}
static void altera_gpio_irq_mask(struct irq_data *d)
{
struct altera_gpio_chip *altera_gc;
struct of_mm_gpio_chip *mm_gc;
unsigned long flags;
u32 intmask;
altera_gc = irq_data_get_irq_chip_data(d);
mm_gc = &altera_gc->mmchip;
spin_lock_irqsave(&altera_gc->gpio_lock, flags);
intmask = readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
/* Clear ALTERA_GPIO_IRQ_MASK bit to mask */
intmask &= ~BIT(irqd_to_hwirq(d));
writel(intmask, mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
spin_unlock_irqrestore(&altera_gc->gpio_lock, flags);
}
/**
* This controller's IRQ type is synthesized in hardware, so this function
* just checks if the requested set_type matches the synthesized IRQ type
*/
static int altera_gpio_irq_set_type(struct irq_data *d,
unsigned int type)
{
struct altera_gpio_chip *altera_gc;
altera_gc = irq_data_get_irq_chip_data(d);
if (type == IRQ_TYPE_NONE)
return 0;
if (type == IRQ_TYPE_LEVEL_HIGH &&
altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH)
return 0;
if (type == IRQ_TYPE_EDGE_RISING &&
altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_RISING)
return 0;
if (type == IRQ_TYPE_EDGE_FALLING &&
altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_FALLING)
return 0;
if (type == IRQ_TYPE_EDGE_BOTH &&
altera_gc->interrupt_trigger == IRQ_TYPE_EDGE_BOTH)
return 0;
return -EINVAL;
}
static unsigned int altera_gpio_irq_startup(struct irq_data *d)
{
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
altera_gpio_irq_unmask(d);
return 0;
}
static struct irq_chip altera_irq_chip = {
.name = "altera-gpio",
.irq_mask = altera_gpio_irq_mask,
.irq_unmask = altera_gpio_irq_unmask,
.irq_set_type = altera_gpio_irq_set_type,
.irq_startup = altera_gpio_irq_startup,
.irq_shutdown = altera_gpio_irq_mask,
};
static int altera_gpio_get(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm_gc;
mm_gc = to_of_mm_gpio_chip(gc);
return !!(readl(mm_gc->regs + ALTERA_GPIO_DATA) & BIT(offset));
}
static void altera_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct of_mm_gpio_chip *mm_gc;
struct altera_gpio_chip *chip;
unsigned long flags;
unsigned int data_reg;
mm_gc = to_of_mm_gpio_chip(gc);
chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
spin_lock_irqsave(&chip->gpio_lock, flags);
data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
if (value)
data_reg |= BIT(offset);
else
data_reg &= ~BIT(offset);
writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
spin_unlock_irqrestore(&chip->gpio_lock, flags);
}
static int altera_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm_gc;
struct altera_gpio_chip *chip;
unsigned long flags;
unsigned int gpio_ddr;
mm_gc = to_of_mm_gpio_chip(gc);
chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
spin_lock_irqsave(&chip->gpio_lock, flags);
/* Set pin as input, assumes software controlled IP */
gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
gpio_ddr &= ~BIT(offset);
writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
spin_unlock_irqrestore(&chip->gpio_lock, flags);
return 0;
}
static int altera_gpio_direction_output(struct gpio_chip *gc,
unsigned offset, int value)
{
struct of_mm_gpio_chip *mm_gc;
struct altera_gpio_chip *chip;
unsigned long flags;
unsigned int data_reg, gpio_ddr;
mm_gc = to_of_mm_gpio_chip(gc);
chip = container_of(mm_gc, struct altera_gpio_chip, mmchip);
spin_lock_irqsave(&chip->gpio_lock, flags);
/* Sets the GPIO value */
data_reg = readl(mm_gc->regs + ALTERA_GPIO_DATA);
if (value)
data_reg |= BIT(offset);
else
data_reg &= ~BIT(offset);
writel(data_reg, mm_gc->regs + ALTERA_GPIO_DATA);
/* Set pin as output, assumes software controlled IP */
gpio_ddr = readl(mm_gc->regs + ALTERA_GPIO_DIR);
gpio_ddr |= BIT(offset);
writel(gpio_ddr, mm_gc->regs + ALTERA_GPIO_DIR);
spin_unlock_irqrestore(&chip->gpio_lock, flags);
return 0;
}
static void altera_gpio_irq_edge_handler(struct irq_desc *desc)
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
{
struct altera_gpio_chip *altera_gc;
struct irq_chip *chip;
struct of_mm_gpio_chip *mm_gc;
struct irq_domain *irqdomain;
unsigned long status;
int i;
altera_gc = irq_desc_get_handler_data(desc);
chip = irq_desc_get_chip(desc);
mm_gc = &altera_gc->mmchip;
irqdomain = altera_gc->mmchip.gc.irqdomain;
chained_irq_enter(chip, desc);
while ((status =
(readl(mm_gc->regs + ALTERA_GPIO_EDGE_CAP) &
readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK)))) {
writel(status, mm_gc->regs + ALTERA_GPIO_EDGE_CAP);
for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
generic_handle_irq(irq_find_mapping(irqdomain, i));
}
}
chained_irq_exit(chip, desc);
}
static void altera_gpio_irq_leveL_high_handler(struct irq_desc *desc)
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
{
struct altera_gpio_chip *altera_gc;
struct irq_chip *chip;
struct of_mm_gpio_chip *mm_gc;
struct irq_domain *irqdomain;
unsigned long status;
int i;
altera_gc = irq_desc_get_handler_data(desc);
chip = irq_desc_get_chip(desc);
mm_gc = &altera_gc->mmchip;
irqdomain = altera_gc->mmchip.gc.irqdomain;
chained_irq_enter(chip, desc);
status = readl(mm_gc->regs + ALTERA_GPIO_DATA);
status &= readl(mm_gc->regs + ALTERA_GPIO_IRQ_MASK);
for_each_set_bit(i, &status, mm_gc->gc.ngpio) {
generic_handle_irq(irq_find_mapping(irqdomain, i));
}
chained_irq_exit(chip, desc);
}
static int altera_gpio_probe(struct platform_device *pdev)
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
{
struct device_node *node = pdev->dev.of_node;
int reg, ret;
struct altera_gpio_chip *altera_gc;
altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL);
if (!altera_gc)
return -ENOMEM;
spin_lock_init(&altera_gc->gpio_lock);
if (of_property_read_u32(node, "altr,ngpio", &reg))
/* By default assume maximum ngpio */
altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
else
altera_gc->mmchip.gc.ngpio = reg;
if (altera_gc->mmchip.gc.ngpio > ALTERA_GPIO_MAX_NGPIO) {
dev_warn(&pdev->dev,
"ngpio is greater than %d, defaulting to %d\n",
ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO);
altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
}
altera_gc->mmchip.gc.direction_input = altera_gpio_direction_input;
altera_gc->mmchip.gc.direction_output = altera_gpio_direction_output;
altera_gc->mmchip.gc.get = altera_gpio_get;
altera_gc->mmchip.gc.set = altera_gpio_set;
altera_gc->mmchip.gc.owner = THIS_MODULE;
altera_gc->mmchip.gc.dev = &pdev->dev;
ret = of_mm_gpiochip_add(node, &altera_gc->mmchip);
if (ret) {
dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
return ret;
}
platform_set_drvdata(pdev, altera_gc);
altera_gc->mapped_irq = platform_get_irq(pdev, 0);
if (altera_gc->mapped_irq < 0)
goto skip_irq;
if (of_property_read_u32(node, "altr,interrupt-type", &reg)) {
ret = -EINVAL;
dev_err(&pdev->dev,
"altr,interrupt-type value not set in device tree\n");
goto teardown;
}
altera_gc->interrupt_trigger = reg;
ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0,
handle_simple_irq, IRQ_TYPE_NONE);
if (ret) {
dev_info(&pdev->dev, "could not add irqchip\n");
return ret;
}
gpiochip_set_chained_irqchip(&altera_gc->mmchip.gc,
&altera_irq_chip,
altera_gc->mapped_irq,
altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ?
altera_gpio_irq_leveL_high_handler :
altera_gpio_irq_edge_handler);
skip_irq:
return 0;
teardown:
pr_err("%s: registration failed with status %d\n",
node->full_name, ret);
return ret;
}
static int altera_gpio_remove(struct platform_device *pdev)
{
struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev);
of_mm_gpiochip_remove(&altera_gc->mmchip);
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
return 0;
drivers/gpio: Altera soft IP GPIO driver Adds a new driver for Altera soft GPIO IP. The driver is able to do read/write and allows GPIO to be a interrupt controller. Tested on Altera GHRD on interrupt handling and IO. v10: - Updated conflicting device tree parameters - Removed unused headers - Used macro instead of magic numbers for ngpio - Code readability cleanup using ?: and temporal variables - Removed leftover garbage and unnecessary function calls - Checked bgpio_init but unusable because Altera GPIO may not be a multiple of 8 bits v9: - Removed duplicated initialization on set_type using temporals to improve code readability in calling generic_handle_irq - Using ?: ternary to reduce code size v8: - Using for_each_set_bit - Added const for struct definition - Removed naggy pr_err - Sort alpha header - Remove unused macros - Use fixed width data types instead of unsigned long - Whitespace issue fixes - Removed _relaxed function for better compatibility across different CPU - Changed irq_create_mapping to platform_get_irq updated implementation to use gpiochip_irqchip_add - Reserve interrupt-cells number 2 in device tree binding for future use - Remove confusing sections on devicetree bindings - Added tristate Kconfig help text v7: - Used dev_warn instead of pr_warn - Clean up unnecesarry if else indentation v6: - Added irq_startup and irq_shutdown - Changed bitwise clamping style - Cleanup bitwise operation to improve readability change naming of mapped irqs from virq to mapped_irq v5: - Dispose irq_domain mapping correctly - Update optional binding description in binding docs v4: - Added vendor prefix to devicetree binding for IP specific properties using MMIO GPIO helper library instead of manually map PIO to memory - altera_gpio_chip inline struct documentation to kerneldoc - Using dev_ print to print a better failure message v2, v3: - Do not reference NO_IRQ - Updated irq_set_type to only allow the hardware configured irq type Signed-off-by: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-24 17:53:03 +08:00
}
static const struct of_device_id altera_gpio_of_match[] = {
{ .compatible = "altr,pio-1.0", },
{},
};
MODULE_DEVICE_TABLE(of, altera_gpio_of_match);
static struct platform_driver altera_gpio_driver = {
.driver = {
.name = "altera_gpio",
.of_match_table = of_match_ptr(altera_gpio_of_match),
},
.probe = altera_gpio_probe,
.remove = altera_gpio_remove,
};
static int __init altera_gpio_init(void)
{
return platform_driver_register(&altera_gpio_driver);
}
subsys_initcall(altera_gpio_init);
static void __exit altera_gpio_exit(void)
{
platform_driver_unregister(&altera_gpio_driver);
}
module_exit(altera_gpio_exit);
MODULE_AUTHOR("Tien Hock Loh <thloh@altera.com>");
MODULE_DESCRIPTION("Altera GPIO driver");
MODULE_LICENSE("GPL");