linux/arch/x86/events/rapl.c

879 lines
23 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/*
* Support Intel/AMD RAPL energy consumption counters
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
* Copyright (C) 2013 Google, Inc., Stephane Eranian
*
* Intel RAPL interface is specified in the IA-32 Manual Vol3b
* section 14.7.1 (September 2013)
*
* AMD RAPL interface for Fam17h is described in the public PPR:
* https://bugzilla.kernel.org/show_bug.cgi?id=206537
*
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
* RAPL provides more controls than just reporting energy consumption
* however here we only expose the 3 energy consumption free running
* counters (pp0, pkg, dram).
*
* Each of those counters increments in a power unit defined by the
* RAPL_POWER_UNIT MSR. On SandyBridge, this unit is 1/(2^16) Joules
* but it can vary.
*
* Counter to rapl events mappings:
*
* pp0 counter: consumption of all physical cores (power plane 0)
* event: rapl_energy_cores
* perf code: 0x1
*
* pkg counter: consumption of the whole processor package
* event: rapl_energy_pkg
* perf code: 0x2
*
* dram counter: consumption of the dram domain (servers only)
* event: rapl_energy_dram
* perf code: 0x3
*
* gpu counter: consumption of the builtin-gpu domain (client only)
* event: rapl_energy_gpu
* perf code: 0x4
*
* psys counter: consumption of the builtin-psys domain (client only)
* event: rapl_energy_psys
* perf code: 0x5
*
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
* We manage those counters as free running (read-only). They may be
* use simultaneously by other tools, such as turbostat.
*
* The events only support system-wide mode counting. There is no
* sampling support because it does not make sense and is not
* supported by the RAPL hardware.
*
* Because we want to avoid floating-point operations in the kernel,
* the events are all reported in fixed point arithmetic (32.32).
* Tools must adjust the counts to convert them to Watts using
* the duration of the measurement. Tools may use a function such as
* ldexp(raw_count, -32);
*/
#define pr_fmt(fmt) "RAPL PMU: " fmt
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/perf_event.h>
#include <linux/nospec.h>
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include "perf_event.h"
#include "probe.h"
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
MODULE_LICENSE("GPL");
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/*
* RAPL energy status counters
*/
enum perf_rapl_events {
PERF_RAPL_PP0 = 0, /* all cores */
PERF_RAPL_PKG, /* entire package */
PERF_RAPL_RAM, /* DRAM */
PERF_RAPL_PP1, /* gpu */
PERF_RAPL_PSYS, /* psys */
PERF_RAPL_MAX,
NR_RAPL_DOMAINS = PERF_RAPL_MAX,
};
static const char *const rapl_domain_names[NR_RAPL_DOMAINS] __initconst = {
"pp0-core",
"package",
"dram",
"pp1-gpu",
"psys",
};
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/*
* event code: LSB 8 bits, passed in attr->config
* any other bit is reserved
*/
#define RAPL_EVENT_MASK 0xFFULL
#define DEFINE_RAPL_FORMAT_ATTR(_var, _name, _format) \
static ssize_t __rapl_##_var##_show(struct kobject *kobj, \
struct kobj_attribute *attr, \
char *page) \
{ \
BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \
return sprintf(page, _format "\n"); \
} \
static struct kobj_attribute format_attr_##_var = \
__ATTR(_name, 0444, __rapl_##_var##_show, NULL)
#define RAPL_CNTR_WIDTH 32
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
#define RAPL_EVENT_ATTR_STR(_name, v, str) \
static struct perf_pmu_events_attr event_attr_##v = { \
.attr = __ATTR(_name, 0444, perf_event_sysfs_show, NULL), \
.id = 0, \
.event_str = str, \
};
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
struct rapl_pmu {
raw_spinlock_t lock;
int n_active;
int cpu;
struct list_head active_list;
struct pmu *pmu;
ktime_t timer_interval;
struct hrtimer hrtimer;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
};
struct rapl_pmus {
struct pmu pmu;
unsigned int maxdie;
struct rapl_pmu *pmus[];
};
enum rapl_unit_quirk {
RAPL_UNIT_QUIRK_NONE,
RAPL_UNIT_QUIRK_INTEL_HSW,
RAPL_UNIT_QUIRK_INTEL_SPR,
};
struct rapl_model {
struct perf_msr *rapl_msrs;
unsigned long events;
unsigned int msr_power_unit;
enum rapl_unit_quirk unit_quirk;
};
/* 1/2^hw_unit Joule */
static int rapl_hw_unit[NR_RAPL_DOMAINS] __read_mostly;
static struct rapl_pmus *rapl_pmus;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
static cpumask_t rapl_cpu_mask;
static unsigned int rapl_cntr_mask;
static u64 rapl_timer_ms;
static struct perf_msr *rapl_msrs;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
static inline struct rapl_pmu *cpu_to_rapl_pmu(unsigned int cpu)
{
unsigned int dieid = topology_logical_die_id(cpu);
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
/*
* The unsigned check also catches the '-1' return value for non
* existent mappings in the topology map.
*/
return dieid < rapl_pmus->maxdie ? rapl_pmus->pmus[dieid] : NULL;
}
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
static inline u64 rapl_read_counter(struct perf_event *event)
{
u64 raw;
rdmsrl(event->hw.event_base, raw);
return raw;
}
static inline u64 rapl_scale(u64 v, int cfg)
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
{
if (cfg > NR_RAPL_DOMAINS) {
pr_warn("Invalid domain %d, failed to scale data\n", cfg);
return v;
}
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/*
* scale delta to smallest unit (1/2^32)
* users must then scale back: count * 1/(1e9*2^32) to get Joules
* or use ldexp(count, -32).
* Watts = Joules/Time delta
*/
return v << (32 - rapl_hw_unit[cfg - 1]);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static u64 rapl_event_update(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
u64 prev_raw_count, new_raw_count;
s64 delta, sdelta;
int shift = RAPL_CNTR_WIDTH;
again:
prev_raw_count = local64_read(&hwc->prev_count);
rdmsrl(event->hw.event_base, new_raw_count);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count) {
cpu_relax();
goto again;
}
/*
* Now we have the new raw value and have updated the prev
* timestamp already. We can now calculate the elapsed delta
* (event-)time and add that to the generic event.
*
* Careful, not all hw sign-extends above the physical width
* of the count.
*/
delta = (new_raw_count << shift) - (prev_raw_count << shift);
delta >>= shift;
sdelta = rapl_scale(delta, event->hw.config);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
local64_add(sdelta, &event->count);
return new_raw_count;
}
static void rapl_start_hrtimer(struct rapl_pmu *pmu)
{
hrtimer_start(&pmu->hrtimer, pmu->timer_interval,
HRTIMER_MODE_REL_PINNED);
}
static enum hrtimer_restart rapl_hrtimer_handle(struct hrtimer *hrtimer)
{
struct rapl_pmu *pmu = container_of(hrtimer, struct rapl_pmu, hrtimer);
struct perf_event *event;
unsigned long flags;
if (!pmu->n_active)
return HRTIMER_NORESTART;
raw_spin_lock_irqsave(&pmu->lock, flags);
list_for_each_entry(event, &pmu->active_list, active_entry)
rapl_event_update(event);
raw_spin_unlock_irqrestore(&pmu->lock, flags);
hrtimer_forward_now(hrtimer, pmu->timer_interval);
return HRTIMER_RESTART;
}
static void rapl_hrtimer_init(struct rapl_pmu *pmu)
{
struct hrtimer *hr = &pmu->hrtimer;
hrtimer_init(hr, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hr->function = rapl_hrtimer_handle;
}
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
static void __rapl_pmu_event_start(struct rapl_pmu *pmu,
struct perf_event *event)
{
if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
return;
event->hw.state = 0;
list_add_tail(&event->active_entry, &pmu->active_list);
local64_set(&event->hw.prev_count, rapl_read_counter(event));
pmu->n_active++;
if (pmu->n_active == 1)
rapl_start_hrtimer(pmu);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static void rapl_pmu_event_start(struct perf_event *event, int mode)
{
struct rapl_pmu *pmu = event->pmu_private;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
unsigned long flags;
raw_spin_lock_irqsave(&pmu->lock, flags);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
__rapl_pmu_event_start(pmu, event);
raw_spin_unlock_irqrestore(&pmu->lock, flags);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static void rapl_pmu_event_stop(struct perf_event *event, int mode)
{
struct rapl_pmu *pmu = event->pmu_private;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
struct hw_perf_event *hwc = &event->hw;
unsigned long flags;
raw_spin_lock_irqsave(&pmu->lock, flags);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/* mark event as deactivated and stopped */
if (!(hwc->state & PERF_HES_STOPPED)) {
WARN_ON_ONCE(pmu->n_active <= 0);
pmu->n_active--;
if (pmu->n_active == 0)
hrtimer_cancel(&pmu->hrtimer);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
list_del(&event->active_entry);
WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
hwc->state |= PERF_HES_STOPPED;
}
/* check if update of sw counter is necessary */
if ((mode & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
/*
* Drain the remaining delta count out of a event
* that we are disabling:
*/
rapl_event_update(event);
hwc->state |= PERF_HES_UPTODATE;
}
raw_spin_unlock_irqrestore(&pmu->lock, flags);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static int rapl_pmu_event_add(struct perf_event *event, int mode)
{
struct rapl_pmu *pmu = event->pmu_private;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
struct hw_perf_event *hwc = &event->hw;
unsigned long flags;
raw_spin_lock_irqsave(&pmu->lock, flags);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (mode & PERF_EF_START)
__rapl_pmu_event_start(pmu, event);
raw_spin_unlock_irqrestore(&pmu->lock, flags);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
return 0;
}
static void rapl_pmu_event_del(struct perf_event *event, int flags)
{
rapl_pmu_event_stop(event, PERF_EF_UPDATE);
}
static int rapl_pmu_event_init(struct perf_event *event)
{
u64 cfg = event->attr.config & RAPL_EVENT_MASK;
int bit, ret = 0;
struct rapl_pmu *pmu;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/* only look at RAPL events */
if (event->attr.type != rapl_pmus->pmu.type)
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
return -ENOENT;
/* check only supported bits are set */
if (event->attr.config & ~RAPL_EVENT_MASK)
return -EINVAL;
if (event->cpu < 0)
return -EINVAL;
event->event_caps |= PERF_EV_CAP_READ_ACTIVE_PKG;
if (!cfg || cfg >= NR_RAPL_DOMAINS + 1)
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
return -EINVAL;
cfg = array_index_nospec((long)cfg, NR_RAPL_DOMAINS + 1);
bit = cfg - 1;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/* check event supported */
if (!(rapl_cntr_mask & (1 << bit)))
return -EINVAL;
/* unsupported modes and filters */
perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs For drivers that do not support context exclusion let's advertise the PERF_PMU_CAP_NOEXCLUDE capability. This ensures that perf will prevent us from handling events where any exclusion flags are set. Let's also remove the now unnecessary check for exclusion flags. PMU drivers that support at least one exclude flag won't have the PERF_PMU_CAP_NOEXCLUDE capability set - these PMU drivers should still check and fail on unsupported exclude flags. These missing tests are not added in this patch. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: robin.murphy@arm.com Cc: suzuki.poulose@arm.com Link: https://lkml.kernel.org/r/1547128414-50693-11-git-send-email-andrew.murray@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-10 21:53:32 +08:00
if (event->attr.sample_period) /* no sampling */
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
return -EINVAL;
/* must be done before validate_group */
pmu = cpu_to_rapl_pmu(event->cpu);
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
if (!pmu)
return -EINVAL;
event->cpu = pmu->cpu;
event->pmu_private = pmu;
event->hw.event_base = rapl_msrs[bit].msr;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
event->hw.config = cfg;
event->hw.idx = bit;
return ret;
}
static void rapl_pmu_event_read(struct perf_event *event)
{
rapl_event_update(event);
}
static ssize_t rapl_get_attr_cpumask(struct device *dev,
struct device_attribute *attr, char *buf)
{
return cpumap_print_to_pagebuf(true, buf, &rapl_cpu_mask);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static DEVICE_ATTR(cpumask, S_IRUGO, rapl_get_attr_cpumask, NULL);
static struct attribute *rapl_pmu_attrs[] = {
&dev_attr_cpumask.attr,
NULL,
};
static struct attribute_group rapl_pmu_attr_group = {
.attrs = rapl_pmu_attrs,
};
RAPL_EVENT_ATTR_STR(energy-cores, rapl_cores, "event=0x01");
RAPL_EVENT_ATTR_STR(energy-pkg , rapl_pkg, "event=0x02");
RAPL_EVENT_ATTR_STR(energy-ram , rapl_ram, "event=0x03");
RAPL_EVENT_ATTR_STR(energy-gpu , rapl_gpu, "event=0x04");
RAPL_EVENT_ATTR_STR(energy-psys, rapl_psys, "event=0x05");
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
RAPL_EVENT_ATTR_STR(energy-cores.unit, rapl_cores_unit, "Joules");
RAPL_EVENT_ATTR_STR(energy-pkg.unit , rapl_pkg_unit, "Joules");
RAPL_EVENT_ATTR_STR(energy-ram.unit , rapl_ram_unit, "Joules");
RAPL_EVENT_ATTR_STR(energy-gpu.unit , rapl_gpu_unit, "Joules");
RAPL_EVENT_ATTR_STR(energy-psys.unit, rapl_psys_unit, "Joules");
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/*
* we compute in 0.23 nJ increments regardless of MSR
*/
RAPL_EVENT_ATTR_STR(energy-cores.scale, rapl_cores_scale, "2.3283064365386962890625e-10");
RAPL_EVENT_ATTR_STR(energy-pkg.scale, rapl_pkg_scale, "2.3283064365386962890625e-10");
RAPL_EVENT_ATTR_STR(energy-ram.scale, rapl_ram_scale, "2.3283064365386962890625e-10");
RAPL_EVENT_ATTR_STR(energy-gpu.scale, rapl_gpu_scale, "2.3283064365386962890625e-10");
RAPL_EVENT_ATTR_STR(energy-psys.scale, rapl_psys_scale, "2.3283064365386962890625e-10");
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/*
* There are no default events, but we need to create
* "events" group (with empty attrs) before updating
* it with detected events.
*/
static struct attribute *attrs_empty[] = {
NULL,
};
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
static struct attribute_group rapl_pmu_events_group = {
.name = "events",
.attrs = attrs_empty,
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
};
DEFINE_RAPL_FORMAT_ATTR(event, event, "config:0-7");
static struct attribute *rapl_formats_attr[] = {
&format_attr_event.attr,
NULL,
};
static struct attribute_group rapl_pmu_format_group = {
.name = "format",
.attrs = rapl_formats_attr,
};
static const struct attribute_group *rapl_attr_groups[] = {
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
&rapl_pmu_attr_group,
&rapl_pmu_format_group,
&rapl_pmu_events_group,
NULL,
};
static struct attribute *rapl_events_cores[] = {
EVENT_PTR(rapl_cores),
EVENT_PTR(rapl_cores_unit),
EVENT_PTR(rapl_cores_scale),
NULL,
};
static umode_t
rapl_not_visible(struct kobject *kobj, struct attribute *attr, int i)
{
return 0;
}
static struct attribute_group rapl_events_cores_group = {
.name = "events",
.attrs = rapl_events_cores,
.is_visible = rapl_not_visible,
};
static struct attribute *rapl_events_pkg[] = {
EVENT_PTR(rapl_pkg),
EVENT_PTR(rapl_pkg_unit),
EVENT_PTR(rapl_pkg_scale),
NULL,
};
static struct attribute_group rapl_events_pkg_group = {
.name = "events",
.attrs = rapl_events_pkg,
.is_visible = rapl_not_visible,
};
static struct attribute *rapl_events_ram[] = {
EVENT_PTR(rapl_ram),
EVENT_PTR(rapl_ram_unit),
EVENT_PTR(rapl_ram_scale),
NULL,
};
static struct attribute_group rapl_events_ram_group = {
.name = "events",
.attrs = rapl_events_ram,
.is_visible = rapl_not_visible,
};
static struct attribute *rapl_events_gpu[] = {
EVENT_PTR(rapl_gpu),
EVENT_PTR(rapl_gpu_unit),
EVENT_PTR(rapl_gpu_scale),
NULL,
};
static struct attribute_group rapl_events_gpu_group = {
.name = "events",
.attrs = rapl_events_gpu,
.is_visible = rapl_not_visible,
};
static struct attribute *rapl_events_psys[] = {
EVENT_PTR(rapl_psys),
EVENT_PTR(rapl_psys_unit),
EVENT_PTR(rapl_psys_scale),
NULL,
};
static struct attribute_group rapl_events_psys_group = {
.name = "events",
.attrs = rapl_events_psys,
.is_visible = rapl_not_visible,
};
static bool test_msr(int idx, void *data)
{
return test_bit(idx, (unsigned long *) data);
}
static struct perf_msr intel_rapl_msrs[] = {
[PERF_RAPL_PP0] = { MSR_PP0_ENERGY_STATUS, &rapl_events_cores_group, test_msr },
[PERF_RAPL_PKG] = { MSR_PKG_ENERGY_STATUS, &rapl_events_pkg_group, test_msr },
[PERF_RAPL_RAM] = { MSR_DRAM_ENERGY_STATUS, &rapl_events_ram_group, test_msr },
[PERF_RAPL_PP1] = { MSR_PP1_ENERGY_STATUS, &rapl_events_gpu_group, test_msr },
[PERF_RAPL_PSYS] = { MSR_PLATFORM_ENERGY_STATUS, &rapl_events_psys_group, test_msr },
};
/*
* Force to PERF_RAPL_MAX size due to:
* - perf_msr_probe(PERF_RAPL_MAX)
* - want to use same event codes across both architectures
*/
static struct perf_msr amd_rapl_msrs[PERF_RAPL_MAX] = {
[PERF_RAPL_PKG] = { MSR_AMD_PKG_ENERGY_STATUS, &rapl_events_pkg_group, test_msr },
};
static int rapl_cpu_offline(unsigned int cpu)
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
{
struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
int target;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
/* Check if exiting cpu is used for collecting rapl events */
if (!cpumask_test_and_clear_cpu(cpu, &rapl_cpu_mask))
return 0;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
pmu->cpu = -1;
/* Find a new cpu to collect rapl events */
target = cpumask_any_but(topology_die_cpumask(cpu), cpu);
/* Migrate rapl events to the new target */
if (target < nr_cpu_ids) {
cpumask_set_cpu(target, &rapl_cpu_mask);
pmu->cpu = target;
perf_pmu_migrate_context(pmu->pmu, cpu, target);
}
return 0;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static int rapl_cpu_online(unsigned int cpu)
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
{
struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
int target;
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
if (!pmu) {
pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu));
if (!pmu)
return -ENOMEM;
raw_spin_lock_init(&pmu->lock);
INIT_LIST_HEAD(&pmu->active_list);
pmu->pmu = &rapl_pmus->pmu;
pmu->timer_interval = ms_to_ktime(rapl_timer_ms);
rapl_hrtimer_init(pmu);
rapl_pmus->pmus[topology_logical_die_id(cpu)] = pmu;
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
}
/*
* Check if there is an online cpu in the package which collects rapl
* events already.
*/
target = cpumask_any_and(&rapl_cpu_mask, topology_die_cpumask(cpu));
if (target < nr_cpu_ids)
return 0;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
cpumask_set_cpu(cpu, &rapl_cpu_mask);
pmu->cpu = cpu;
return 0;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
static int rapl_check_hw_unit(struct rapl_model *rm)
{
u64 msr_rapl_power_unit_bits;
int i;
/* protect rdmsrl() to handle virtualization */
if (rdmsrl_safe(rm->msr_power_unit, &msr_rapl_power_unit_bits))
return -1;
for (i = 0; i < NR_RAPL_DOMAINS; i++)
rapl_hw_unit[i] = (msr_rapl_power_unit_bits >> 8) & 0x1FULL;
switch (rm->unit_quirk) {
/*
* DRAM domain on HSW server and KNL has fixed energy unit which can be
* different than the unit from power unit MSR. See
* "Intel Xeon Processor E5-1600 and E5-2600 v3 Product Families, V2
* of 2. Datasheet, September 2014, Reference Number: 330784-001 "
*/
case RAPL_UNIT_QUIRK_INTEL_HSW:
rapl_hw_unit[PERF_RAPL_RAM] = 16;
break;
/*
* SPR shares the same DRAM domain energy unit as HSW, plus it
* also has a fixed energy unit for Psys domain.
*/
case RAPL_UNIT_QUIRK_INTEL_SPR:
rapl_hw_unit[PERF_RAPL_RAM] = 16;
rapl_hw_unit[PERF_RAPL_PSYS] = 0;
break;
default:
break;
}
/*
* Calculate the timer rate:
* Use reference of 200W for scaling the timeout to avoid counter
* overflows. 200W = 200 Joules/sec
* Divide interval by 2 to avoid lockstep (2 * 100)
* if hw unit is 32, then we use 2 ms 1/200/2
*/
rapl_timer_ms = 2;
if (rapl_hw_unit[0] < 32) {
rapl_timer_ms = (1000 / (2 * 100));
rapl_timer_ms *= (1ULL << (32 - rapl_hw_unit[0] - 1));
}
return 0;
}
static void __init rapl_advertise(void)
{
int i;
pr_info("API unit is 2^-32 Joules, %d fixed counters, %llu ms ovfl timer\n",
hweight32(rapl_cntr_mask), rapl_timer_ms);
for (i = 0; i < NR_RAPL_DOMAINS; i++) {
if (rapl_cntr_mask & (1 << i)) {
pr_info("hw unit of domain %s 2^-%d Joules\n",
rapl_domain_names[i], rapl_hw_unit[i]);
}
}
}
static void cleanup_rapl_pmus(void)
{
int i;
for (i = 0; i < rapl_pmus->maxdie; i++)
kfree(rapl_pmus->pmus[i]);
kfree(rapl_pmus);
}
static const struct attribute_group *rapl_attr_update[] = {
&rapl_events_cores_group,
&rapl_events_pkg_group,
&rapl_events_ram_group,
&rapl_events_gpu_group,
&rapl_events_psys_group,
NULL,
};
static int __init init_rapl_pmus(void)
{
int maxdie = topology_max_packages() * topology_max_die_per_package();
size_t size;
size = sizeof(*rapl_pmus) + maxdie * sizeof(struct rapl_pmu *);
rapl_pmus = kzalloc(size, GFP_KERNEL);
if (!rapl_pmus)
return -ENOMEM;
rapl_pmus->maxdie = maxdie;
rapl_pmus->pmu.attr_groups = rapl_attr_groups;
rapl_pmus->pmu.attr_update = rapl_attr_update;
rapl_pmus->pmu.task_ctx_nr = perf_invalid_context;
rapl_pmus->pmu.event_init = rapl_pmu_event_init;
rapl_pmus->pmu.add = rapl_pmu_event_add;
rapl_pmus->pmu.del = rapl_pmu_event_del;
rapl_pmus->pmu.start = rapl_pmu_event_start;
rapl_pmus->pmu.stop = rapl_pmu_event_stop;
rapl_pmus->pmu.read = rapl_pmu_event_read;
rapl_pmus->pmu.module = THIS_MODULE;
perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs For drivers that do not support context exclusion let's advertise the PERF_PMU_CAP_NOEXCLUDE capability. This ensures that perf will prevent us from handling events where any exclusion flags are set. Let's also remove the now unnecessary check for exclusion flags. PMU drivers that support at least one exclude flag won't have the PERF_PMU_CAP_NOEXCLUDE capability set - these PMU drivers should still check and fail on unsupported exclude flags. These missing tests are not added in this patch. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: robin.murphy@arm.com Cc: suzuki.poulose@arm.com Link: https://lkml.kernel.org/r/1547128414-50693-11-git-send-email-andrew.murray@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-10 21:53:32 +08:00
rapl_pmus->pmu.capabilities = PERF_PMU_CAP_NO_EXCLUDE;
return 0;
}
static struct rapl_model model_snb = {
.events = BIT(PERF_RAPL_PP0) |
BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_PP1),
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_snbep = {
.events = BIT(PERF_RAPL_PP0) |
BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_RAM),
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_hsw = {
.events = BIT(PERF_RAPL_PP0) |
BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_RAM) |
BIT(PERF_RAPL_PP1),
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_hsx = {
.events = BIT(PERF_RAPL_PP0) |
BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_RAM),
.unit_quirk = RAPL_UNIT_QUIRK_INTEL_HSW,
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_knl = {
.events = BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_RAM),
.unit_quirk = RAPL_UNIT_QUIRK_INTEL_HSW,
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_skl = {
.events = BIT(PERF_RAPL_PP0) |
BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_RAM) |
BIT(PERF_RAPL_PP1) |
BIT(PERF_RAPL_PSYS),
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_spr = {
.events = BIT(PERF_RAPL_PP0) |
BIT(PERF_RAPL_PKG) |
BIT(PERF_RAPL_RAM) |
BIT(PERF_RAPL_PSYS),
.unit_quirk = RAPL_UNIT_QUIRK_INTEL_SPR,
.msr_power_unit = MSR_RAPL_POWER_UNIT,
.rapl_msrs = intel_rapl_msrs,
};
static struct rapl_model model_amd_fam17h = {
.events = BIT(PERF_RAPL_PKG),
.msr_power_unit = MSR_AMD_RAPL_POWER_UNIT,
.rapl_msrs = amd_rapl_msrs,
};
static const struct x86_cpu_id rapl_model_match[] __initconst = {
X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE, &model_snb),
X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE_X, &model_snbep),
X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE, &model_snb),
X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE_X, &model_snbep),
X86_MATCH_INTEL_FAM6_MODEL(HASWELL, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, &model_hsx),
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_L, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_G, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_G, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, &model_hsx),
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D, &model_hsx),
X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &model_knl),
X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &model_knl),
X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, &model_hsx),
X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &model_hsw),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, &model_hsx),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, &model_hsx),
X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, &model_skl),
X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &model_spr),
X86_MATCH_VENDOR_FAM(AMD, 0x17, &model_amd_fam17h),
X86_MATCH_VENDOR_FAM(HYGON, 0x18, &model_amd_fam17h),
{},
};
MODULE_DEVICE_TABLE(x86cpu, rapl_model_match);
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
static int __init rapl_pmu_init(void)
{
const struct x86_cpu_id *id;
struct rapl_model *rm;
int ret;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
id = x86_match_cpu(rapl_model_match);
if (!id)
return -ENODEV;
rm = (struct rapl_model *) id->driver_data;
rapl_msrs = rm->rapl_msrs;
rapl_cntr_mask = perf_msr_probe(rapl_msrs, PERF_RAPL_MAX,
false, (void *) &rm->events);
ret = rapl_check_hw_unit(rm);
if (ret)
return ret;
ret = init_rapl_pmus();
if (ret)
return ret;
/*
* Install callbacks. Core will call them for each online cpu.
*/
ret = cpuhp_setup_state(CPUHP_AP_PERF_X86_RAPL_ONLINE,
"perf/x86/rapl:online",
rapl_cpu_online, rapl_cpu_offline);
if (ret)
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
goto out;
ret = perf_pmu_register(&rapl_pmus->pmu, "power", -1);
if (ret)
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
goto out1;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
rapl_advertise();
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
return 0;
out1:
perf/x86/intel/rapl: Make package handling more robust The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 06:58:38 +08:00
cpuhp_remove_state(CPUHP_AP_PERF_X86_RAPL_ONLINE);
out:
pr_warn("Initialization failed (%d), disabled\n", ret);
cleanup_rapl_pmus();
return ret;
perf/x86: Add Intel RAPL PMU support This patch adds a new uncore PMU to expose the Intel RAPL energy consumption counters. Up to 3 counters, each counting a particular RAPL event are exposed. The RAPL counters are available on Intel SandyBridge, IvyBridge, Haswell. The server skus add a 3rd counter. The following events are available and exposed in sysfs: - power/energy-cores: power consumption of all cores on socket - power/energy-pkg: power consumption of all cores + LLc cache - power/energy-dram: power consumption of DRAM (servers only) For each event both the unit (Joules) and scale (2^-32 J) is exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/power/events/energy-*.unit /sys/devices/power/events/energy-*.scale The RAPL PMU is uncore by nature and is implemented such that it only works in system-wide mode. Measuring only one CPU per socket is sufficient. The /sys/devices/power/cpumask file can be used by tools to figure out which CPUs to monitor by default. For instance, on a 2-socket system, 2 CPUs (one on each socket) will be shown. All the counters measure in the same unit (exposed via sysfs). The perf_events API exposes all RAPL counters as 64-bit integers counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools must convert the counts by multiplying them by 2^-32 to obtain Joules. The reason for this is that the kernel avoids doing floating point math whenever possible because it is expensive (user floating-point state must be saved). The method used avoids kernel floating-point usage. There is no loss of precision. Thanks to PeterZ for suggesting this approach. To convert the raw count in Watt: W = C * 2.3 / (1e10 * time) or ldexp(C, -32). RAPL PMU is a new standalone PMU which registers with the perf_event core subsystem. The PMU type (attr->type) is dynamically allocated and is available from /sys/device/power/type. Sampling is not supported by the RAPL PMU. There is no privilege level filtering either. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: zheng.z.yan@intel.com Cc: bp@alien8.de Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 00:58:50 +08:00
}
module_init(rapl_pmu_init);
static void __exit intel_rapl_exit(void)
{
cpuhp_remove_state_nocalls(CPUHP_AP_PERF_X86_RAPL_ONLINE);
perf_pmu_unregister(&rapl_pmus->pmu);
cleanup_rapl_pmus();
}
module_exit(intel_rapl_exit);