linux/drivers/media/platform/ti-vpe/Makefile

obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe.o
obj-$(CONFIG_VIDEO_TI_VPDMA) += ti-vpdma.o

ti-vpe-y := vpe.o sc.o csc.o
ti-vpdma-y := vpdma.o

ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG

obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o

ti-cal-y := cal.o
[media] v4l: ti-vpe: Add VPE mem to mem driver VPE is a block which consists of a single memory to memory path which can perform chrominance up/down sampling, de-interlacing, scaling, and color space conversion of raster or tiled YUV420 coplanar, YUV422 coplanar or YUV422 interleaved video formats. We create a mem2mem driver based primarily on the mem2mem-testdev example. The de-interlacer, scaler and color space converter are all bypassed for now to keep the driver simple. Chroma up/down sampler blocks are implemented, so conversion beteen different YUV formats is possible. Each mem2mem context allocates a buffer for VPE MMR values which it will use when it gets access to the VPE HW via the mem2mem queue, it also allocates a VPDMA descriptor list to which configuration and data descriptors are added. Based on the information received via v4l2 ioctls for the source and destination queues, the driver configures the values for the MMRs, and stores them in the buffer. There are also some VPDMA parameters like frame start and line mode which needs to be configured, these are configured by direct register writes via the VPDMA helper functions. The driver's device_run() mem2mem op will add each descriptor based on how the source and destination queues are set up for the given ctx, once the list is prepared, it's submitted to VPDMA, these descriptors when parsed by VPDMA will upload MMR registers, start DMA of video buffers on the various input and output clients/ports. When the list is parsed completely(and the DMAs on all the output ports done), an interrupt is generated which we use to notify that the source and destination buffers are done. The rest of the driver is quite similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as the HW support coplanar formats. Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 2013-10-16 13:36:47 +08:00			`obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe.o`
[media] media: ti-vpe: vpdma: Make vpdma library into its own module The VPDMA (Video Port DMA) as found in devices such as DRA7xx is used for both the Video Processing Engine (VPE) and the Video Input Port (VIP). In preparation for this we need to turn vpdma into its own kernel module. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 2016-11-19 07:20:11 +08:00			`obj-$(CONFIG_VIDEO_TI_VPDMA) += ti-vpdma.o`
[media] v4l: ti-vpe: Add VPE mem to mem driver VPE is a block which consists of a single memory to memory path which can perform chrominance up/down sampling, de-interlacing, scaling, and color space conversion of raster or tiled YUV420 coplanar, YUV422 coplanar or YUV422 interleaved video formats. We create a mem2mem driver based primarily on the mem2mem-testdev example. The de-interlacer, scaler and color space converter are all bypassed for now to keep the driver simple. Chroma up/down sampler blocks are implemented, so conversion beteen different YUV formats is possible. Each mem2mem context allocates a buffer for VPE MMR values which it will use when it gets access to the VPE HW via the mem2mem queue, it also allocates a VPDMA descriptor list to which configuration and data descriptors are added. Based on the information received via v4l2 ioctls for the source and destination queues, the driver configures the values for the MMRs, and stores them in the buffer. There are also some VPDMA parameters like frame start and line mode which needs to be configured, these are configured by direct register writes via the VPDMA helper functions. The driver's device_run() mem2mem op will add each descriptor based on how the source and destination queues are set up for the given ctx, once the list is prepared, it's submitted to VPDMA, these descriptors when parsed by VPDMA will upload MMR registers, start DMA of video buffers on the various input and output clients/ports. When the list is parsed completely(and the DMAs on all the output ports done), an interrupt is generated which we use to notify that the source and destination buffers are done. The rest of the driver is quite similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as the HW support coplanar formats. Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 2013-10-16 13:36:47 +08:00
[media] media: ti-vpe: vpdma: Make vpdma library into its own module The VPDMA (Video Port DMA) as found in devices such as DRA7xx is used for both the Video Processing Engine (VPE) and the Video Input Port (VIP). In preparation for this we need to turn vpdma into its own kernel module. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 2016-11-19 07:20:11 +08:00			`ti-vpe-y := vpe.o sc.o csc.o`
			`ti-vpdma-y := vpdma.o`
[media] v4l: ti-vpe: Add VPE mem to mem driver VPE is a block which consists of a single memory to memory path which can perform chrominance up/down sampling, de-interlacing, scaling, and color space conversion of raster or tiled YUV420 coplanar, YUV422 coplanar or YUV422 interleaved video formats. We create a mem2mem driver based primarily on the mem2mem-testdev example. The de-interlacer, scaler and color space converter are all bypassed for now to keep the driver simple. Chroma up/down sampler blocks are implemented, so conversion beteen different YUV formats is possible. Each mem2mem context allocates a buffer for VPE MMR values which it will use when it gets access to the VPE HW via the mem2mem queue, it also allocates a VPDMA descriptor list to which configuration and data descriptors are added. Based on the information received via v4l2 ioctls for the source and destination queues, the driver configures the values for the MMRs, and stores them in the buffer. There are also some VPDMA parameters like frame start and line mode which needs to be configured, these are configured by direct register writes via the VPDMA helper functions. The driver's device_run() mem2mem op will add each descriptor based on how the source and destination queues are set up for the given ctx, once the list is prepared, it's submitted to VPDMA, these descriptors when parsed by VPDMA will upload MMR registers, start DMA of video buffers on the various input and output clients/ports. When the list is parsed completely(and the DMAs on all the output ports done), an interrupt is generated which we use to notify that the source and destination buffers are done. The rest of the driver is quite similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as the HW support coplanar formats. Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> 2013-10-16 13:36:47 +08:00
			`ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG`
[media] media: ti-vpe: Add CAL v4l2 camera capture driver The Camera Adaptation Layer (CAL) is a block which consists of a dual port CSI2/MIPI camera capture engine. Port #0 can handle CSI2 camera connected to up to 4 data lanes. Port #1 can handle CSI2 camera connected to up to 2 data lanes. The driver implements the required API/ioctls to be V4L2 compliant. Driver supports the following: - V4L2 API using DMABUF/MMAP buffer access based on videobuf2 api - Asynchronous sensor sub device registration - DT support Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 2016-01-07 07:37:26 +08:00
			`obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o`

			`ti-cal-y := cal.o`