linux/drivers/gpu/drm/drm_crtc_helper_internal.h

66 lines
2.0 KiB
C
Raw Normal View History

drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
/*
* Copyright © 2016 Intel Corporation
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
*/
/*
* This header file contains mode setting related functions and definitions
* which are only used within the drm kms helper module as internal
* implementation details and are not exported to drivers.
*/
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
#include <drm/drm_dp_helper.h>
/* drm_fb_helper.c */
#ifdef CONFIG_DRM_FBDEV_EMULATION
int drm_fb_helper_modinit(void);
#else
static inline int drm_fb_helper_modinit(void)
{
return 0;
}
#endif
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
/* drm_dp_aux_dev.c */
#ifdef CONFIG_DRM_DP_AUX_CHARDEV
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-22 07:10:19 +08:00
int drm_dp_aux_dev_init(void);
void drm_dp_aux_dev_exit(void);
int drm_dp_aux_register_devnode(struct drm_dp_aux *aux);
void drm_dp_aux_unregister_devnode(struct drm_dp_aux *aux);
#else
static inline int drm_dp_aux_dev_init(void)
{
return 0;
}
static inline void drm_dp_aux_dev_exit(void)
{
}
static inline int drm_dp_aux_register_devnode(struct drm_dp_aux *aux)
{
return 0;
}
static inline void drm_dp_aux_unregister_devnode(struct drm_dp_aux *aux)
{
}
#endif