korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 16:24:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
b6416e6101
linux/arch/x86/kvm/lapic.h

229 lines
7.0 KiB
C
Raw Normal View History

KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
#ifndef __KVM_X86_LAPIC_H
#define __KVM_X86_LAPIC_H
KVM: move iodev.h from virt/kvm/ to include/kvm iodev.h contains definitions for the kvm_io_bus framework. This is needed both by the generic KVM code in virt/kvm as well as by architecture specific code under arch/. Putting the header file in virt/kvm and using local includes in the architecture part seems at least dodgy to me, so let's move the file into include/kvm, so that a more natural "#include <kvm/iodev.h>" can be used by all of the code. This also solves a problem later when using struct kvm_io_device in arm_vgic.h. Fixing up the FSF address in the GPL header and a wrong include path on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-26 22:39:29 +08:00
#include <kvm/iodev.h>
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
#include <linux/kvm_host.h>
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 19:42:34 +08:00
#define KVM_APIC_INIT 0
#define KVM_APIC_SIPI 1
KVM: x86: Misc LAPIC changes to expose helper functions Exporting LAPIC utility functions and macros for re-use in SVM code. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:40 +08:00
#define KVM_APIC_LVT_NUM 6
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 19:42:34 +08:00
svm: Add VMEXIT handlers for AVIC This patch introduces VMEXIT handlers, avic_incomplete_ipi_interception() and avic_unaccelerated_access_interception() along with two trace points (trace_kvm_avic_incomplete_ipi and trace_kvm_avic_unaccelerated_access). Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:48 +08:00
#define KVM_APIC_SHORT_MASK 0xc0000
#define KVM_APIC_DEST_MASK 0x800
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 23:01:50 +08:00
struct kvm_timer {
struct hrtimer timer;
s64 period; /* unit: ns */
KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support Most windows guests still utilize APIC Timer periodic/oneshot mode instead of tsc-deadline mode, and the APIC Timer periodic/oneshot mode are still emulated by high overhead hrtimer on host. This patch converts the expected expire time of the periodic/oneshot mode to guest deadline tsc in order to leverage VMX preemption timer logic for APIC Timer tsc-deadline mode. After each preemption timer vmexit preemption timer is restarted to emulate LVTT current-count register is automatically reloaded from the initial-count register when the count reaches 0. This patch reduces ~5600 cycles for each APIC Timer periodic mode operation virtualization. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Squashed with my fixes that were reviewed-by Paolo.] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-10-24 18:23:13 +08:00
ktime_t target_expiration;
KVM: x86: detect LVTT changes under APICv APIC-write VM exits are "trap-like": they save CS:RIP values for the instruction after the write, and more importantly, the handler will already see the new value in the virtual-APIC page. This means that apic_reg_write cannot use kvm_apic_get_reg to omit timer cancelation when mode changes. timer_mode_mask shouldn't be changing as it depends on cpuid. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 22:06:46 +08:00
u32 timer_mode;
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 23:01:50 +08:00
u32 timer_mode_mask;
u64 tscdeadline;
KVM: x86: add option to advance tscdeadline hrtimer expiration For the hrtimer which emulates the tscdeadline timer in the guest, add an option to advance expiration, and busy spin on VM-entry waiting for the actual expiration time to elapse. This allows achieving low latencies in cyclictest (or any scenario which requires strict timing regarding timer expiration). Reduces average cyclictest latency from 12us to 8us on Core i5 desktop. Note: this option requires tuning to find the appropriate value for a particular hardware/guest combination. One method is to measure the average delay between apic_timer_fn and VM-entry. Another method is to start with 1000ns, and increase the value in say 500ns increments until avg cyclictest numbers stop decreasing. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-16 22:08:15 +08:00
u64 expired_tscdeadline;
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 23:01:50 +08:00
atomic_t pending; /* accumulated triggered timers */
KVM: x86: support using the vmx preemption timer for tsc deadline timer The VMX preemption timer can be used to virtualize the TSC deadline timer. The VMX preemption timer is armed when the vCPU is running, and a VMExit will happen if the virtual TSC deadline timer expires. When the vCPU thread is blocked because of HLT, KVM will switch to use an hrtimer, and then go back to the VMX preemption timer when the vCPU thread is unblocked. This solution avoids the complex OS's hrtimer system, and the host timer interrupt handling cost, replacing them with a little math (for guest->host TSC and host TSC->preemption timer conversion) and a cheaper VMexit. This benefits latency for isolated pCPUs. [A word about performance... Yunhong reported a 30% reduction in average latency from cyclictest. I made a similar test with tscdeadline_latency from kvm-unit-tests, and measured - ~20 clock cycles loss (out of ~3200, so less than 1% but still statistically significant) in the worst case where the test halts just after programming the TSC deadline timer - ~800 clock cycles gain (25% reduction in latency) in the best case where the test busy waits. I removed the VMX bits from Yunhong's patch, to concentrate them in the next patch - Paolo] Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14 05:20:01 +08:00
bool hv_timer_in_use;
KVM: Remove internal timer abstraction kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move it there to make it easier to hack on it. struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation. Move near its two users (with different names) to prepare for simplification. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-07-26 23:01:50 +08:00
};
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
struct kvm_lapic {
unsigned long base_address;
struct kvm_io_device dev;
KVM: unify part of generic timer handling Hide the internals of vcpu awakening / injection from the in-kernel emulated timers. This makes future changes in this logic easier and decreases the distance to more generic timer handling. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-23 21:57:41 +08:00
struct kvm_timer lapic_timer;
u32 divide_count;
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
struct kvm_vcpu *vcpu;
KVM: x86: detect SPIV changes under APICv APIC-write VM exits are "trap-like": they save CS:RIP values for the instruction after the write, and more importantly, the handler will already see the new value in the virtual-APIC page. This caused a bug if you used KVM_SET_IRQCHIP to set the SW-enabled bit in the SPIV register. The chain of events is as follows: * When the irqchip is added to the destination VM, the apic_sw_disabled static key is incremented (1) * When the KVM_SET_IRQCHIP ioctl is invoked, it is decremented (0) * When the guest disables the bit in the SPIV register, e.g. as part of shutdown, apic_set_spiv does not notice the change and the static key is _not_ incremented. * When the guest is destroyed, the static key is decremented (-1), resulting in this trace: WARNING: at kernel/jump_label.c:81 __static_key_slow_dec+0xa6/0xb0() jump label: negative count! [<ffffffff816bf898>] dump_stack+0x19/0x1b [<ffffffff8107c6f1>] warn_slowpath_common+0x61/0x80 [<ffffffff8107c76c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff811931e6>] __static_key_slow_dec+0xa6/0xb0 [<ffffffff81193226>] static_key_slow_dec_deferred+0x16/0x20 [<ffffffffa0637698>] kvm_free_lapic+0x88/0xa0 [kvm] [<ffffffffa061c63e>] kvm_arch_vcpu_uninit+0x2e/0xe0 [kvm] [<ffffffffa05ff301>] kvm_vcpu_uninit+0x21/0x40 [kvm] [<ffffffffa067cec7>] vmx_free_vcpu+0x47/0x70 [kvm_intel] [<ffffffffa061bc50>] kvm_arch_vcpu_free+0x50/0x60 [kvm] [<ffffffffa061ca22>] kvm_arch_destroy_vm+0x102/0x260 [kvm] [<ffffffff810b68fd>] ? synchronize_srcu+0x1d/0x20 [<ffffffffa06030d1>] kvm_put_kvm+0xe1/0x1c0 [kvm] [<ffffffffa06036f8>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff81215c62>] __fput+0x102/0x310 [<ffffffff81215f4e>] ____fput+0xe/0x10 [<ffffffff810ab664>] task_work_run+0xb4/0xe0 [<ffffffff81083944>] do_exit+0x304/0xc60 [<ffffffff816c8dfc>] ? _raw_spin_unlock_irq+0x2c/0x50 [<ffffffff810fd22d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8108432c>] do_group_exit+0x4c/0xc0 [<ffffffff810843b4>] SyS_exit_group+0x14/0x20 [<ffffffff816d33a9>] system_call_fastpath+0x16/0x1b Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 22:06:45 +08:00
bool sw_enabled;
KVM: Optimize searching for highest IRR Most of the time IRR is empty, so instead of scanning the whole IRR on each VM entry keep a variable that tells us if IRR is not empty. IRR will have to be scanned twice on each IRQ delivery, but this is much more rare than VM entry. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-11 16:06:51 +08:00
bool irr_pending;
KVM: x86: keep track of LVT0 changes under APICv Memory-mapped LVT0 register already contains the new value when APICv traps so we can't directly detect a change. Memorize a bit we are interested in to enable legacy NMI watchdog. Suggested-by: Yoshida Nobuo <yoshida.nb@ncos.nec.co.jp> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-01 04:19:16 +08:00
bool lvt0_in_nmi_mode;
KVM: optimize ISR lookups We perform ISR lookups twice: during interrupt injection and on EOI. Typical workloads only have a single bit set there. So we can avoid ISR scans by 1. counting bits as we set/clear them in ISR 2. on set, caching the injected vector number 3. on clear, invalidating the cache The real purpose of this is enabling PV EOI which needs to quickly validate the vector. But non PV guests also benefit: with this patch, and without interrupt nesting, apic_find_highest_isr will always return immediately without scanning ISR. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-25 00:24:26 +08:00
/* Number of bits set in ISR. */
s16 isr_count;
/* The highest vector set in ISR; if -1 - invalid, must scan ISR. */
int highest_isr_cache;
KVM: document lapic regs field Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-25 00:24:19 +08:00
/**
* APIC register page. The layout matches the register layout seen by
* the guest 1:1, because it is accessed by the vmx microcode.
* Note: Only one register, the TPR, is used by the microcode.
*/
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
void *regs;
KVM: Accelerated apic support This adds a mechanism for exposing the virtual apic tpr to the guest, and a protocol for letting the guest update the tpr without causing a vmexit if conditions allow (e.g. there is no interrupt pending with a higher priority than the new tpr). Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-25 22:52:32 +08:00
gpa_t vapic_addr;
KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368) In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa59d6 ('KVM: Accelerated apic support') Reported-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21 02:23:22 +08:00
struct gfn_to_hva_cache vapic_cache;
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 19:42:34 +08:00
unsigned long pending_events;
unsigned int sipi_vector;
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
};
kvm: x86: Convert ioapic->rtc_status.dest_map to a struct Currently this is a bitmap which tracks which CPUs we expect an EOI from. Move this bitmap to a struct so that we can track additional information there. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-29 23:04:43 +08:00
struct dest_map;
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
int kvm_create_lapic(struct kvm_vcpu *vcpu);
void kvm_free_lapic(struct kvm_vcpu *vcpu);
int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu);
int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu);
int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu);
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 19:42:34 +08:00
void kvm_apic_accept_events(struct kvm_vcpu *vcpu);
KVM: x86: INIT and reset sequences are different x86 architecture defines differences between the reset and INIT sequences. INIT does not initialize the FPU (including MMX, XMM, YMM, etc.), TSC, PMU, MSRs (in general), MTRRs machine-check, APIC ID, APIC arbitration ID and BSP. References (from Intel SDM): "If the MP protocol has completed and a BSP is chosen, subsequent INITs (either to a specific processor or system wide) do not cause the MP protocol to be repeated." [8.4.2: MP Initialization Protocol Requirements and Restrictions] [Table 9-1. IA-32 Processor States Following Power-up, Reset, or INIT] "If the processor is reset by asserting the INIT# pin, the x87 FPU state is not changed." [9.2: X87 FPU INITIALIZATION] "The state of the local APIC following an INIT reset is the same as it is after a power-up or hardware reset, except that the APIC ID and arbitration ID registers are not affected." [10.4.7.3: Local APIC State After an INIT Reset ("Wait-for-SIPI" State)] Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1428924848-28212-1-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-13 19:34:08 +08:00
void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
KVM: APIC: avoid instruction emulation for EOI writes Instruction emulation for EOI writes can be skipped, since sane guest simply uses MOV instead of string operations. This is a nice improvement when guest doesn't support x2apic or hyper-V EOI support. a single VM bandwidth is observed with ~8% bandwidth improvement (7.4Gbps->8Gbps), by saving ~5% cycles from EOI emulation. Signed-off-by: Kevin Tian <kevin.tian@intel.com> <Based on earlier work from>: Signed-off-by: Eddie Dong <eddie.dong@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-30 18:56:17 +08:00
void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
KVM: add statics were possible, function definition in lapic.h Noticed by sparse: arch/x86/kvm/vmx.c:1583:6: warning: symbol 'vmx_disable_intercept_for_msr' was not declared. Should it be static? arch/x86/kvm/x86.c:3406:5: warning: symbol 'kvm_task_switch_16' was not declared. Should it be static? arch/x86/kvm/x86.c:3429:5: warning: symbol 'kvm_task_switch_32' was not declared. Should it be static? arch/x86/kvm/mmu.c:1968:6: warning: symbol 'kvm_mmu_remove_one_alloc_mmu_page' was not declared. Should it be static? arch/x86/kvm/mmu.c:2014:6: warning: symbol 'mmu_destroy_caches' was not declared. Should it be static? arch/x86/kvm/lapic.c:862:5: warning: symbol 'kvm_lapic_get_base' was not declared. Should it be static? arch/x86/kvm/i8254.c:94:5: warning: symbol 'pit_get_gate' was not declared. Should it be static? arch/x86/kvm/i8254.c:196:5: warning: symbol '__pit_timer_fn' was not declared. Should it be static? arch/x86/kvm/i8254.c:561:6: warning: symbol '__inject_pit_timer_intr' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-28 03:14:13 +08:00
u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
KVM: Add Directed EOI support to APIC emulation Directed EOI is specified by x2APIC, but is available even when lapic is in xAPIC mode. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-05 22:39:35 +08:00
void kvm_apic_set_version(struct kvm_vcpu *vcpu);
KVM: x86: Misc LAPIC changes to expose helper functions Exporting LAPIC utility functions and macros for re-use in SVM code. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:40 +08:00
int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val);
int kvm_lapic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
void *data);
bool kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
int short_hand, unsigned int dest, int dest_mode);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
KVM: nVMX: Enable nested posted interrupt processing If vcpu has a interrupt in vmx non-root mode, injecting that interrupt requires a vmexit. With posted interrupt processing, the vmexit is not needed, and interrupts are fully taken care of by hardware. In nested vmx, this feature avoids much more vmexits than non-nested vmx. When L1 asks L0 to deliver L1's posted interrupt vector, and the target VCPU is in non-root mode, we use a physical ipi to deliver POSTED_INTR_NV to the target vCPU. Using POSTED_INTR_NV avoids unexpected interrupts if a concurrent vmexit happens and L1's vector is different with L0's. The IPI triggers posted interrupt processing in the target physical CPU. In case the target vCPU was not in guest mode, complete the posted interrupt delivery on the next entry to L2. Signed-off-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-03 23:58:17 +08:00
void __kvm_apic_update_irr(u32 *pir, void *regs);
KVM: VMX: Add the deliver posted interrupt algorithm Only deliver the posted interrupt when target vcpu is running and there is no previous interrupt pending in pir. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 19:25:15 +08:00
void kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir);
KVM: Return destination vcpu on interrupt injection Add a new parameter to know vcpus who received the interrupt. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 19:21:37 +08:00
int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq,
kvm: x86: Convert ioapic->rtc_status.dest_map to a struct Currently this is a bitmap which tracks which CPUs we expect an EOI from. Move this bitmap to a struct so that we can track additional information there. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-29 23:04:43 +08:00
struct dest_map *dest_map);
KVM: Expose kvm_lapic_local_deliver() Needed to deliver performance monitoring interrupts. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-10 20:57:21 +08:00
int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
KVM: optimize apic interrupt delivery Most interrupt are delivered to only one vcpu. Use pre-build tables to find interrupt destination instead of looping through all vcpus. In case of logical mode loop only through vcpus in a logical cluster irq is sent to. Signed-off-by: Gleb Natapov <gleb@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-13 22:19:24 +08:00
bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
kvm: x86: Convert ioapic->rtc_status.dest_map to a struct Currently this is a bitmap which tracks which CPUs we expect an EOI from. Move this bitmap to a struct so that we can track additional information there. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-29 23:04:43 +08:00
struct kvm_lapic_irq *irq, int *r, struct dest_map *dest_map);
KVM: optimize apic interrupt delivery Most interrupt are delivered to only one vcpu. Use pre-build tables to find interrupt destination instead of looping through all vcpus. In case of logical mode loop only through vcpus in a logical cluster irq is sent to. Signed-off-by: Gleb Natapov <gleb@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-13 22:19:24 +08:00
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
u64 kvm_get_apic_base(struct kvm_vcpu *vcpu);
KVM: x86: Validate guest writes to MSR_IA32_APICBASE Check for invalid state transitions on guest-initiated updates of MSR_IA32_APICBASE. This address both enabling of the x2APIC when it is not supported and all invalid transitions as described in SDM section 10.12.5. It also checks that no reserved bit is set in APICBASE by the guest. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> [Use cpuid_maxphyaddr instead of guest_cpuid_get_phys_bits. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-24 23:48:44 +08:00
int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info);
KVM: x86: use hardware-compatible format for APIC ID register We currently always shift APIC ID as if APIC was in xAPIC mode. x2APIC mode wants to use more bits and storing a hardware-compabible value is the the sanest option. KVM API to set the lapic expects that bottom 8 bits of APIC ID are in top 8 bits of APIC_ID register, so the register needs to be shifted in x2APIC mode. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 04:09:22 +08:00
int kvm_apic_get_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s);
int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
KVM: LAPIC: introduce kvm_get_lapic_target_expiration_tsc() Introdce kvm_get_lapic_target_expiration_tsc() to get APIC Timer target deadline tsc. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-10-24 18:23:11 +08:00
u64 kvm_get_lapic_target_expiration_tsc(struct kvm_vcpu *vcpu);
KVM: emulate lapic tsc deadline timer for guest This patch emulate lapic tsc deadline timer for guest: Enumerate tsc deadline timer capability by CPUID; Enable tsc deadline timer mode by lapic MMIO; Start tsc deadline timer by WRMSR; [jan: use do_div()] [avi: fix for !irqchip_in_kernel()] [marcelo: another fix for !irqchip_in_kernel()] Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-22 16:55:52 +08:00
u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu);
void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data);
x86, apicv: add APICv register virtualization support - APIC read doesn't cause VM-Exit - APIC write becomes trap-like Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-25 10:18:49 +08:00
void kvm_apic_write_nodecode(struct kvm_vcpu *vcpu, u32 offset);
x86, apicv: add virtual interrupt delivery support Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-25 10:18:51 +08:00
void kvm_apic_set_eoi_accelerated(struct kvm_vcpu *vcpu, int vector);
x86, apicv: add APICv register virtualization support - APIC read doesn't cause VM-Exit - APIC write becomes trap-like Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-25 10:18:49 +08:00
KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368) In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa59d6 ('KVM: Accelerated apic support') Reported-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21 02:23:22 +08:00
int kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
KVM: Accelerated apic support This adds a mechanism for exposing the virtual apic tpr to the guest, and a protocol for letting the guest update the tpr without causing a vmexit if conditions allow (e.g. there is no interrupt pending with a higher priority than the new tpr). Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-25 22:52:32 +08:00
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
KVM: x2apic interface to lapic This patch implements MSR interface to local apic as defines by x2apic Intel specification. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-07-05 22:39:36 +08:00
int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
KVM: Add HYPER-V apic access MSRs Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up access to EOI/TPR/ICR apic registers for PV guests. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-17 21:51:23 +08:00
int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu)
{
kvm/x86: move Hyper-V MSR's/hypercall code into hyperv.c file This patch introduce Hyper-V related source code file - hyperv.c and per vm and per vcpu hyperv context structures. All Hyper-V MSR's and hypercall code moved into hyperv.c. All Hyper-V kvm/vcpu fields moved into appropriate hyperv context structures. Copyrights and authors information copied from x86.c to hyperv.c. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Peter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-03 20:01:34 +08:00
return vcpu->arch.hyperv.hv_vapic & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE;
KVM: Add HYPER-V apic access MSRs Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up access to EOI/TPR/ICR apic registers for PV guests. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-17 21:51:23 +08:00
}
KVM: host side for eoi optimization Implementation of PV EOI using shared memory. This reduces the number of exits an interrupt causes as much as by half. The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. We set it before injecting an interrupt and clear before injecting a nested one. Guest tests it using a test and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. There's a new MSR to set the address of said register in guest memory. Otherwise not much changed: - Guest EOI is not required - Register is tested & ISR is automatically cleared on exit For testing results see description of previous patch 'kvm_para: guest side for eoi avoidance'. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-25 00:25:07 +08:00
int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data);
KVM: use jump label to optimize checking for HW enabled APIC in APIC_BASE MSR Usually all APICs are HW enabled so the check can be optimized out. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:30 +08:00
void kvm_lapic_init(void);
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
KVM: x86: Misc LAPIC changes to expose helper functions Exporting LAPIC utility functions and macros for re-use in SVM code. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:40 +08:00
#define VEC_POS(v) ((v) & (32 - 1))
#define REG_POS(v) (((v) >> 5) << 4)
static inline void kvm_lapic_set_vector(int vec, void *bitmap)
{
set_bit(VEC_POS(vec), (bitmap) + REG_POS(vec));
}
static inline void kvm_lapic_set_irr(int vec, struct kvm_lapic *apic)
{
kvm_lapic_set_vector(vec, apic->regs + APIC_IRR);
/*
* irr_pending must be true if any interrupt is pending; set it after
* APIC_IRR to avoid race with apic_clear_irr
*/
apic->irr_pending = true;
}
KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg Rename kvm_apic_get_reg to kvm_lapic_get_reg to be consistent with the existing kvm_lapic_set_reg counterpart. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:41 +08:00
static inline u32 kvm_lapic_get_reg(struct kvm_lapic *apic, int reg_off)
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
{
KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg Rename kvm_apic_get_reg to kvm_lapic_get_reg to be consistent with the existing kvm_lapic_set_reg counterpart. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:41 +08:00
return *((u32 *) (apic->regs + reg_off));
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
}
KVM: x86: Misc LAPIC changes to expose helper functions Exporting LAPIC utility functions and macros for re-use in SVM code. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-05 03:09:40 +08:00
static inline void kvm_lapic_set_reg(struct kvm_lapic *apic, int reg_off, u32 val)
{
*((u32 *) (apic->regs + reg_off)) = val;
}
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
extern struct static_key kvm_no_apic_vcpu;
KVM: x86: consolidate different ways to test for in-kernel LAPIC Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08 20:48:51 +08:00
static inline bool lapic_in_kernel(struct kvm_vcpu *vcpu)
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
{
if (static_key_false(&kvm_no_apic_vcpu))
return vcpu->arch.apic;
return true;
}
extern struct static_key_deferred apic_hw_disabled;
static inline int kvm_apic_hw_enabled(struct kvm_lapic *apic)
{
if (static_key_false(&apic_hw_disabled.key))
return apic->vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE;
return MSR_IA32_APICBASE_ENABLE;
}
extern struct static_key_deferred apic_sw_disabled;
KVM: x86: optimize some accesses to LVTT and SPIV We mirror a subset of these registers in separate variables. Using them directly should be faster. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 22:06:47 +08:00
static inline bool kvm_apic_sw_enabled(struct kvm_lapic *apic)
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
{
if (static_key_false(&apic_sw_disabled.key))
KVM: x86: optimize some accesses to LVTT and SPIV We mirror a subset of these registers in separate variables. Using them directly should be faster. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-30 22:06:47 +08:00
return apic->sw_enabled;
return true;
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
}
static inline bool kvm_apic_present(struct kvm_vcpu *vcpu)
{
KVM: x86: consolidate different ways to test for in-kernel LAPIC Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08 20:48:51 +08:00
return lapic_in_kernel(vcpu) && kvm_apic_hw_enabled(vcpu->arch.apic);
KVM: inline kvm_apic_present() and kvm_lapic_enabled() Those functions are used during interrupt injection. When inlined they become nops on the fast path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-05 20:58:33 +08:00
}
static inline int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
{
return kvm_apic_present(vcpu) && kvm_apic_sw_enabled(vcpu->arch.apic);
}
x86, apicv: add virtual x2apic support basically to benefit from apicv, we need to enable virtualized x2apic mode. Currently, we only enable it when guest is really using x2apic. Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic: 0x800 - 0x8ff: no read intercept for apicv register virtualization, except APIC ID and TMCCT which need software's assistance to get right value. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-25 10:18:50 +08:00
static inline int apic_x2apic_mode(struct kvm_lapic *apic)
{
return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
}
kvm/x86: per-vcpu apicv deactivation support The decision on whether to use hardware APIC virtualization used to be taken globally, based on the availability of the feature in the CPU and the value of a module parameter. However, under certain circumstances we want to control it on per-vcpu basis. In particular, when the userspace activates HyperV synthetic interrupt controller (SynIC), APICv has to be disabled as it's incompatible with SynIC auto-EOI behavior. To achieve that, introduce 'apicv_active' flag on struct kvm_vcpu_arch, and kvm_vcpu_deactivate_apicv() function to turn APICv off. The flag is initialized based on the module parameter and CPU capability, and consulted whenever an APICv-specific action is performed. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 20:36:33 +08:00
static inline bool kvm_vcpu_apicv_active(struct kvm_vcpu *vcpu)
x86, apicv: add virtual interrupt delivery support Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-25 10:18:51 +08:00
{
kvm/x86: per-vcpu apicv deactivation support The decision on whether to use hardware APIC virtualization used to be taken globally, based on the availability of the feature in the CPU and the value of a module parameter. However, under certain circumstances we want to control it on per-vcpu basis. In particular, when the userspace activates HyperV synthetic interrupt controller (SynIC), APICv has to be disabled as it's incompatible with SynIC auto-EOI behavior. To achieve that, introduce 'apicv_active' flag on struct kvm_vcpu_arch, and kvm_vcpu_deactivate_apicv() function to turn APICv off. The flag is initialized based on the module parameter and CPU capability, and consulted whenever an APICv-specific action is performed. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 20:36:33 +08:00
return vcpu->arch.apic && vcpu->arch.apicv_active;
x86, apicv: add virtual interrupt delivery support Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-25 10:18:51 +08:00
}
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 19:42:34 +08:00
static inline bool kvm_apic_has_events(struct kvm_vcpu *vcpu)
{
KVM: x86: consolidate different ways to test for in-kernel LAPIC Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08 20:48:51 +08:00
return lapic_in_kernel(vcpu) && vcpu->arch.apic->pending_events;
KVM: x86: Rework INIT and SIPI handling A VCPU sending INIT or SIPI to some other VCPU races for setting the remote VCPU's mp_state. When we were unlucky, KVM_MP_STATE_INIT_RECEIVED was overwritten by kvm_emulate_halt and, thus, got lost. This introduces APIC events for those two signals, keeping them in kvm_apic until kvm_apic_accept_events is run over the target vcpu context. kvm_apic_has_events reports to kvm_arch_vcpu_runnable if there are pending events, thus if vcpu blocking should end. The patch comes with the side effect of effectively obsoleting KVM_MP_STATE_SIPI_RECEIVED. We still accept it from user space, but immediately translate it to KVM_MP_STATE_INIT_RECEIVED + KVM_APIC_SIPI. The vcpu itself will no longer enter the KVM_MP_STATE_SIPI_RECEIVED state. That also means we no longer exit to user space after receiving a SIPI event. Furthermore, we already reset the VCPU on INIT, only fixing up the code segment later on when SIPI arrives. Moreover, we fix INIT handling for the BSP: it never enter wait-for-SIPI but directly starts over on INIT. Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-13 19:42:34 +08:00
}
kvm: x86: Deliver MSI IRQ to only lowest prio cpu if msi_redir_hint is true An MSI interrupt should only be delivered to the lowest priority CPU when it has RH=1, regardless of the delivery mode. Modified kvm_is_dm_lowest_prio() to check for either irq->delivery_mode == APIC_DM_LOWPRI or irq->msi_redir_hint. Moved kvm_is_dm_lowest_prio() into lapic.h and renamed to kvm_lowest_prio_delivery(). Changed a check in kvm_irq_delivery_to_apic_fast() from irq->delivery_mode == APIC_DM_LOWPRI to kvm_is_dm_lowest_prio(). Signed-off-by: James Sullivan <sullivan.james.f@gmail.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-19 09:26:04 +08:00
static inline bool kvm_lowest_prio_delivery(struct kvm_lapic_irq *irq)
{
return (irq->delivery_mode == APIC_DM_LOWEST ||
irq->msi_redir_hint);
}
KVM: x86: API changes for SMM support This patch includes changes to the external API for SMM support. Userspace can predicate the availability of the new fields and ioctls on a new capability, KVM_CAP_X86_SMM, which is added at the end of the patch series. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-01 21:06:40 +08:00
static inline int kvm_lapic_latched_init(struct kvm_vcpu *vcpu)
{
KVM: x86: consolidate different ways to test for in-kernel LAPIC Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08 20:48:51 +08:00
return lapic_in_kernel(vcpu) && test_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
KVM: x86: API changes for SMM support This patch includes changes to the external API for SMM support. Userspace can predicate the availability of the new fields and ioctls on a new capability, KVM_CAP_X86_SMM, which is added at the end of the patch series. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-01 21:06:40 +08:00
}
KVM: x86: dynamic kvm_apic_map x2APIC supports up to 2^32-1 LAPICs, but most guest in coming years will probably has fewer VCPUs. Dynamic size saves memory at the cost of turning one constant into a variable. apic_map mutex had to be moved before allocation to avoid races with cpu hotplug. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 04:09:20 +08:00
static inline u32 kvm_apic_id(struct kvm_lapic *apic)
kvm/x86: Hyper-V synthetic interrupt controller SynIC (synthetic interrupt controller) is a lapic extension, which is controlled via MSRs and maintains for each vCPU - 16 synthetic interrupt "lines" (SINT's); each can be configured to trigger a specific interrupt vector optionally with auto-EOI semantics - a message page in the guest memory with 16 256-byte per-SINT message slots - an event flag page in the guest memory with 16 2048-bit per-SINT event flag areas The host triggers a SINT whenever it delivers a new message to the corresponding slot or flips an event flag bit in the corresponding area. The guest informs the host that it can try delivering a message by explicitly asserting EOI in lapic or writing to End-Of-Message (EOM) MSR. The userspace (qemu) triggers interrupts and receives EOM notifications via irqfd with resampler; for that, a GSI is allocated for each configured SINT, and irq_routing api is extended to support GSI-SINT mapping. Changes v4: * added activation of SynIC by vcpu KVM_ENABLE_CAP * added per SynIC active flag * added deactivation of APICv upon SynIC activation Changes v3: * added KVM_CAP_HYPERV_SYNIC and KVM_IRQ_ROUTING_HV_SINT notes into docs Changes v2: * do not use posted interrupts for Hyper-V SynIC AutoEOI vectors * add Hyper-V SynIC vectors into EOI exit bitmap * Hyper-V SyniIC SINT msr write logic simplified Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 20:36:34 +08:00
{
KVM: x86: use hardware-compatible format for APIC ID register We currently always shift APIC ID as if APIC was in xAPIC mode. x2APIC mode wants to use more bits and storing a hardware-compabible value is the the sanest option. KVM API to set the lapic expects that bottom 8 bits of APIC ID are in top 8 bits of APIC_ID register, so the register needs to be shifted in x2APIC mode. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 04:09:22 +08:00
/* To avoid a race between apic_base and following APIC_ID update when
* switching to x2apic_mode, the x2apic mode returns initial x2apic id.
*/
if (apic_x2apic_mode(apic))
return apic->vcpu->vcpu_id;
return kvm_lapic_get_reg(apic, APIC_ID) >> 24;
kvm/x86: Hyper-V synthetic interrupt controller SynIC (synthetic interrupt controller) is a lapic extension, which is controlled via MSRs and maintains for each vCPU - 16 synthetic interrupt "lines" (SINT's); each can be configured to trigger a specific interrupt vector optionally with auto-EOI semantics - a message page in the guest memory with 16 256-byte per-SINT message slots - an event flag page in the guest memory with 16 2048-bit per-SINT event flag areas The host triggers a SINT whenever it delivers a new message to the corresponding slot or flips an event flag bit in the corresponding area. The guest informs the host that it can try delivering a message by explicitly asserting EOI in lapic or writing to End-Of-Message (EOM) MSR. The userspace (qemu) triggers interrupts and receives EOM notifications via irqfd with resampler; for that, a GSI is allocated for each configured SINT, and irq_routing api is extended to support GSI-SINT mapping. Changes v4: * added activation of SynIC by vcpu KVM_ENABLE_CAP * added per SynIC active flag * added deactivation of APICv upon SynIC activation Changes v3: * added KVM_CAP_HYPERV_SYNIC and KVM_IRQ_ROUTING_HV_SINT notes into docs Changes v2: * do not use posted interrupts for Hyper-V SynIC AutoEOI vectors * add Hyper-V SynIC vectors into EOI exit bitmap * Hyper-V SyniIC SINT msr write logic simplified Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10 20:36:34 +08:00
}
KVM: Add reset/restore rtc_status support restore rtc_status from migration or save/restore Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 19:21:38 +08:00
bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
KVM: x86: add option to advance tscdeadline hrtimer expiration For the hrtimer which emulates the tscdeadline timer in the guest, add an option to advance expiration, and busy spin on VM-entry waiting for the actual expiration time to elapse. This allows achieving low latencies in cyclictest (or any scenario which requires strict timing regarding timer expiration). Reduces average cyclictest latency from 12us to 8us on Core i5 desktop. Note: this option requires tuning to find the appropriate value for a particular hardware/guest combination. One method is to measure the average delay between apic_timer_fn and VM-entry. Another method is to start with 1000ns, and increase the value in say 500ns increments until avg cyclictest numbers stop decreasing. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-16 22:08:15 +08:00
void wait_lapic_expire(struct kvm_vcpu *vcpu);
KVM: Define a new interface kvm_intr_is_single_vcpu() This patch defines a new interface kvm_intr_is_single_vcpu(), which can returns whether the interrupt is for single-CPU or not. It is used by VT-d PI, since now we only support single-CPU interrupts, For lowest-priority interrupts, if user configures it via /proc/irq or uses irqbalance to make it single-CPU, we can use PI to deliver the interrupts to it. Full functionality of lowest-priority support will be added later. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-18 22:29:47 +08:00
bool kvm_intr_is_single_vcpu_fast(struct kvm *kvm, struct kvm_lapic_irq *irq,
struct kvm_vcpu **dest_vcpu);
KVM: x86: Use vector-hashing to deliver lowest-priority interrupts Use vector-hashing to deliver lowest-priority interrupts, As an example, modern Intel CPUs in server platform use this method to handle lowest-priority interrupts. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-25 16:53:33 +08:00
int kvm_vector_to_index(u32 vector, u32 dest_vcpus,
const unsigned long *bitmap, u32 bitmap_size);
KVM: x86: support using the vmx preemption timer for tsc deadline timer The VMX preemption timer can be used to virtualize the TSC deadline timer. The VMX preemption timer is armed when the vCPU is running, and a VMExit will happen if the virtual TSC deadline timer expires. When the vCPU thread is blocked because of HLT, KVM will switch to use an hrtimer, and then go back to the VMX preemption timer when the vCPU thread is unblocked. This solution avoids the complex OS's hrtimer system, and the host timer interrupt handling cost, replacing them with a little math (for guest->host TSC and host TSC->preemption timer conversion) and a cheaper VMexit. This benefits latency for isolated pCPUs. [A word about performance... Yunhong reported a 30% reduction in average latency from cyclictest. I made a similar test with tscdeadline_latency from kvm-unit-tests, and measured - ~20 clock cycles loss (out of ~3200, so less than 1% but still statistically significant) in the worst case where the test halts just after programming the TSC deadline timer - ~800 clock cycles gain (25% reduction in latency) in the best case where the test busy waits. I removed the VMX bits from Yunhong's patch, to concentrate them in the next patch - Paolo] Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14 05:20:01 +08:00
void kvm_lapic_switch_to_sw_timer(struct kvm_vcpu *vcpu);
void kvm_lapic_switch_to_hv_timer(struct kvm_vcpu *vcpu);
void kvm_lapic_expired_hv_timer(struct kvm_vcpu *vcpu);
bool kvm_lapic_hv_timer_in_use(struct kvm_vcpu *vcpu);
KVM: Move irqchip declarations into new ioapic.h and lapic.h This allows reuse of ioapic in ia64. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-12-17 13:59:56 +08:00
#endif
Reference in New Issue Copy Permalink