linux/drivers/net/ethernet/intel/ice/ice.h

461 lines
14 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (c) 2018, Intel Corporation. */
#ifndef _ICE_H_
#define _ICE_H_
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/compiler.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#include <linux/cpumask.h>
#include <linux/rtnetlink.h>
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include <linux/aer.h>
#include <linux/interrupt.h>
#include <linux/ethtool.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/bitmap.h>
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#include <linux/log2.h>
#include <linux/ip.h>
#include <linux/sctp.h>
#include <linux/ipv6.h>
#include <linux/if_bridge.h>
#include <linux/avf/virtchnl.h>
#include <net/ipv6.h>
#include "ice_devids.h"
#include "ice_type.h"
#include "ice_txrx.h"
#include "ice_dcb.h"
2018-03-20 22:58:08 +08:00
#include "ice_switch.h"
#include "ice_common.h"
2018-03-20 22:58:08 +08:00
#include "ice_sched.h"
#include "ice_virtchnl_pf.h"
#include "ice_sriov.h"
extern const char ice_drv_ver[];
#define ICE_BAR0 0
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#define ICE_REQ_DESC_MULTIPLE 32
#define ICE_MIN_NUM_DESC ICE_REQ_DESC_MULTIPLE
#define ICE_MAX_NUM_DESC 8160
/* set default number of Rx/Tx descriptors to the minimum between
* ICE_MAX_NUM_DESC and the number of descriptors to fill up an entire page
*/
#define ICE_DFLT_NUM_RX_DESC min_t(u16, ICE_MAX_NUM_DESC, \
ALIGN(PAGE_SIZE / \
sizeof(union ice_32byte_rx_desc), \
ICE_REQ_DESC_MULTIPLE))
#define ICE_DFLT_NUM_TX_DESC min_t(u16, ICE_MAX_NUM_DESC, \
ALIGN(PAGE_SIZE / \
sizeof(struct ice_tx_desc), \
ICE_REQ_DESC_MULTIPLE))
#define ICE_DFLT_TRAFFIC_CLASS BIT(0)
#define ICE_INT_NAME_STR_LEN (IFNAMSIZ + 16)
#define ICE_ETHTOOL_FWVER_LEN 32
#define ICE_AQ_LEN 64
#define ICE_MBXQ_LEN 64
#define ICE_MIN_MSIX 2
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#define ICE_NO_VSI 0xffff
#define ICE_MAX_TXQS 2048
#define ICE_MAX_RXQS 2048
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#define ICE_VSI_MAP_CONTIG 0
#define ICE_VSI_MAP_SCATTER 1
#define ICE_MAX_SCATTER_TXQS 16
#define ICE_MAX_SCATTER_RXQS 16
#define ICE_Q_WAIT_RETRY_LIMIT 10
#define ICE_Q_WAIT_MAX_RETRY (5 * ICE_Q_WAIT_RETRY_LIMIT)
#define ICE_MAX_LG_RSS_QS 256
#define ICE_MAX_SMALL_RSS_QS 8
#define ICE_RES_VALID_BIT 0x8000
#define ICE_RES_MISC_VEC_ID (ICE_RES_VALID_BIT - 1)
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#define ICE_INVAL_Q_INDEX 0xffff
ice: Refactor VSI allocation, deletion and rebuild flow This patch refactors aspects of the VSI allocation, deletion and rebuild flow. Some of the more noteworthy changes are described below. 1) On reset, all switch filters applied in the hardware are lost. In the rebuild flow, only MAC and broadcast filters are being restored. Instead, use a new function ice_replay_all_fltr to restore all the filters that were previously added. To do this, remove calls to ice_remove_vsi_fltr to prevent cleaning out the internal bookkeeping structures that ice_replay_all_fltr uses to replay filters. 2) Introduce a new state bit __ICE_PREPARED_FOR_RESET to distinguish the PF that requested the reset (and consequently prepared for it) from the rest of the PFs. These other PFs will prepare for reset only when they receive an interrupt from the firmware. 3) Use new functions ice_add_vsi and ice_free_vsi to create and destroy VSIs respectively. These functions accept a handle to uniquely identify a VSI. This same handle is required to rebuild the VSI post reset. To prevent confusion, the existing ice_vsi_add was renamed to ice_vsi_init. 4) Enhance ice_vsi_setup for the upcoming SR-IOV changes and expose a new wrapper function ice_pf_vsi_setup to create PF VSIs. Rework the error handling path in ice_setup_pf_sw. 5) Introduce a new function ice_vsi_release_all to release all PF VSIs. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-09 21:29:50 +08:00
#define ICE_INVAL_VFID 256
#define ICE_MAX_VF_COUNT 256
#define ICE_MAX_QS_PER_VF 256
#define ICE_MIN_QS_PER_VF 1
#define ICE_DFLT_QS_PER_VF 4
#define ICE_NONQ_VECS_VF 1
#define ICE_MAX_SCATTER_QS_PER_VF 16
#define ICE_MAX_BASE_QS_PER_VF 16
#define ICE_MAX_INTR_PER_VF 65
#define ICE_MIN_INTR_PER_VF (ICE_MIN_QS_PER_VF + 1)
#define ICE_DFLT_INTR_PER_VF (ICE_DFLT_QS_PER_VF + 1)
#define ICE_MAX_RESET_WAIT 20
#define ICE_VSIQF_HKEY_ARRAY_SIZE ((VSIQF_HKEY_MAX_INDEX + 1) * 4)
#define ICE_DFLT_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#define ICE_MAX_MTU (ICE_AQ_SET_MAC_FRAME_SIZE_MAX - \
(ETH_HLEN + ETH_FCS_LEN + (VLAN_HLEN * 2)))
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
#define ICE_UP_TABLE_TRANSLATE(val, i) \
(((val) << ICE_AQ_VSI_UP_TABLE_UP##i##_S) & \
ICE_AQ_VSI_UP_TABLE_UP##i##_M)
#define ICE_TX_DESC(R, i) (&(((struct ice_tx_desc *)((R)->desc))[i]))
#define ICE_RX_DESC(R, i) (&(((union ice_32b_rx_flex_desc *)((R)->desc))[i]))
#define ICE_TX_CTX_DESC(R, i) (&(((struct ice_tx_ctx_desc *)((R)->desc))[i]))
ice: Support link events, reset and rebuild Link events are posted to a PF's admin receive queue (ARQ). This patch adds the ability to detect and process link events. This patch also adds the ability to process resets. The driver can process the following resets: 1) EMP Reset (EMPR) 2) Global Reset (GLOBR) 3) Core Reset (CORER) 4) Physical Function Reset (PFR) EMPR is the largest level of reset that the driver can handle. An EMPR resets the manageability block and also the data path, including PHY and link for all the PFs. The affected PFs are notified of this event through a miscellaneous interrupt. GLOBR is a subset of EMPR. It does everything EMPR does except that it doesn't reset the manageability block. CORER is a subset of GLOBR. It does everything GLOBR does but doesn't reset PHY and link. PFR is a subset of CORER and affects only the given physical function. In other words, PFR can be thought of as a CORER for a single PF. Since only the issuing PF is affected, a PFR doesn't result in the miscellaneous interrupt being triggered. All the resets have the following in common: 1) Tx/Rx is halted and all queues are stopped. 2) All the VSIs and filters programmed for the PF are lost and have to be reprogrammed. 3) Control queue interfaces are reset and have to be reprogrammed. In the rebuild flow, control queues are reinitialized, VSIs are reallocated and filters are restored. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:18 +08:00
/* Macro for each VSI in a PF */
#define ice_for_each_vsi(pf, i) \
for ((i) = 0; (i) < (pf)->num_alloc_vsi; (i)++)
/* Macros for each Tx/Rx ring in a VSI */
#define ice_for_each_txq(vsi, i) \
for ((i) = 0; (i) < (vsi)->num_txq; (i)++)
#define ice_for_each_rxq(vsi, i) \
for ((i) = 0; (i) < (vsi)->num_rxq; (i)++)
/* Macros for each allocated Tx/Rx ring whether used or not in a VSI */
ice: Report stats for allocated queues via ethtool stats It is not safe to have the string table for statistics change order or size over the lifetime of a given netdevice. This is because of the nature of the 3-step process for obtaining stats. First, user space performs a request for the size of the strings table. Second it performs a separate request for the strings themselves, after allocating space for the table. Third, it requests the stats themselves, also allocating space for the table. If the size decreased, there is potential to see garbage data or stats values. In the worst case, we could potentially see stats values become mis-aligned with their strings, so that it looks like a statistic is being reported differently than it actually is. Even worse, if the size increased, there is potential that the strings table or stats table was not allocated large enough and the stats code could access and write to memory it should not, potentially resulting in undefined behavior and system crashes. It isn't even safe if the size always changes under the RTNL lock. This is because the calls take place over multiple user space commands, so it is not possible to hold the RTNL lock for the entire duration of obtaining strings and stats. Further, not all consumers of the ethtool API are the user space ethtool program, and it is possible that one assumes the strings will not change (valid under the current contract), and thus only requests the stats values when requesting stats in a loop. Finally, it's not possible in the general case to detect when the size changes, because it is quite possible that one value which could impact the stat size increased, while another decreased. This would result in the same total number of stats, but reordering them so that stats no longer line up with the strings they belong to. Since only size changes aren't enough, we would need some sort of hash or token to determine when the strings no longer match. This would require extending the ethtool stats commands, but there is no more space in the relevant structures. The real solution to resolve this would be to add a completely new API for stats, probably over netlink. In the ice driver, the only thing impacting the stats that is not constant is the number of queues. Instead of reporting stats for each used queue, report stats for each allocated queue. We do not change the number of queues allocated for a given netdevice, as we pass this into the alloc_etherdev_mq() function to set the num_tx_queues and num_rx_queues. This resolves the potential bugs at the slight cost of displaying many queue statistics which will not be activated. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-09 21:28:54 +08:00
#define ice_for_each_alloc_txq(vsi, i) \
for ((i) = 0; (i) < (vsi)->alloc_txq; (i)++)
#define ice_for_each_alloc_rxq(vsi, i) \
for ((i) = 0; (i) < (vsi)->alloc_rxq; (i)++)
#define ice_for_each_q_vector(vsi, i) \
for ((i) = 0; (i) < (vsi)->num_q_vectors; (i)++)
#define ICE_UCAST_PROMISC_BITS (ICE_PROMISC_UCAST_TX | ICE_PROMISC_MCAST_TX | \
ICE_PROMISC_UCAST_RX | ICE_PROMISC_MCAST_RX)
#define ICE_UCAST_VLAN_PROMISC_BITS (ICE_PROMISC_UCAST_TX | \
ICE_PROMISC_MCAST_TX | \
ICE_PROMISC_UCAST_RX | \
ICE_PROMISC_MCAST_RX | \
ICE_PROMISC_VLAN_TX | \
ICE_PROMISC_VLAN_RX)
#define ICE_MCAST_PROMISC_BITS (ICE_PROMISC_MCAST_TX | ICE_PROMISC_MCAST_RX)
#define ICE_MCAST_VLAN_PROMISC_BITS (ICE_PROMISC_MCAST_TX | \
ICE_PROMISC_MCAST_RX | \
ICE_PROMISC_VLAN_TX | \
ICE_PROMISC_VLAN_RX)
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_tc_info {
u16 qoffset;
u16 qcount_tx;
u16 qcount_rx;
u8 netdev_tc;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
};
struct ice_tc_cfg {
u8 numtc; /* Total number of enabled TCs */
u8 ena_tc; /* Tx map */
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_tc_info tc_info[ICE_MAX_TRAFFIC_CLASS];
};
struct ice_res_tracker {
u16 num_entries;
u16 search_hint;
u16 list[1];
};
struct ice_qs_cfg {
struct mutex *qs_mutex; /* will be assigned to &pf->avail_q_mutex */
unsigned long *pf_map;
unsigned long pf_map_size;
unsigned int q_count;
unsigned int scatter_count;
u16 *vsi_map;
u16 vsi_map_offset;
u8 mapping_mode;
};
struct ice_sw {
struct ice_pf *pf;
u16 sw_id; /* switch ID for this switch */
u16 bridge_mode; /* VEB/VEPA/Port Virtualizer */
};
enum ice_state {
__ICE_DOWN,
ice: Support link events, reset and rebuild Link events are posted to a PF's admin receive queue (ARQ). This patch adds the ability to detect and process link events. This patch also adds the ability to process resets. The driver can process the following resets: 1) EMP Reset (EMPR) 2) Global Reset (GLOBR) 3) Core Reset (CORER) 4) Physical Function Reset (PFR) EMPR is the largest level of reset that the driver can handle. An EMPR resets the manageability block and also the data path, including PHY and link for all the PFs. The affected PFs are notified of this event through a miscellaneous interrupt. GLOBR is a subset of EMPR. It does everything EMPR does except that it doesn't reset the manageability block. CORER is a subset of GLOBR. It does everything GLOBR does but doesn't reset PHY and link. PFR is a subset of CORER and affects only the given physical function. In other words, PFR can be thought of as a CORER for a single PF. Since only the issuing PF is affected, a PFR doesn't result in the miscellaneous interrupt being triggered. All the resets have the following in common: 1) Tx/Rx is halted and all queues are stopped. 2) All the VSIs and filters programmed for the PF are lost and have to be reprogrammed. 3) Control queue interfaces are reset and have to be reprogrammed. In the rebuild flow, control queues are reinitialized, VSIs are reallocated and filters are restored. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:18 +08:00
__ICE_NEEDS_RESTART,
ice: Refactor VSI allocation, deletion and rebuild flow This patch refactors aspects of the VSI allocation, deletion and rebuild flow. Some of the more noteworthy changes are described below. 1) On reset, all switch filters applied in the hardware are lost. In the rebuild flow, only MAC and broadcast filters are being restored. Instead, use a new function ice_replay_all_fltr to restore all the filters that were previously added. To do this, remove calls to ice_remove_vsi_fltr to prevent cleaning out the internal bookkeeping structures that ice_replay_all_fltr uses to replay filters. 2) Introduce a new state bit __ICE_PREPARED_FOR_RESET to distinguish the PF that requested the reset (and consequently prepared for it) from the rest of the PFs. These other PFs will prepare for reset only when they receive an interrupt from the firmware. 3) Use new functions ice_add_vsi and ice_free_vsi to create and destroy VSIs respectively. These functions accept a handle to uniquely identify a VSI. This same handle is required to rebuild the VSI post reset. To prevent confusion, the existing ice_vsi_add was renamed to ice_vsi_init. 4) Enhance ice_vsi_setup for the upcoming SR-IOV changes and expose a new wrapper function ice_pf_vsi_setup to create PF VSIs. Rework the error handling path in ice_setup_pf_sw. 5) Introduce a new function ice_vsi_release_all to release all PF VSIs. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-09 21:29:50 +08:00
__ICE_PREPARED_FOR_RESET, /* set by driver when prepared */
__ICE_RESET_OICR_RECV, /* set by driver after rcv reset OICR */
__ICE_PFR_REQ, /* set by driver and peers */
ice: Support link events, reset and rebuild Link events are posted to a PF's admin receive queue (ARQ). This patch adds the ability to detect and process link events. This patch also adds the ability to process resets. The driver can process the following resets: 1) EMP Reset (EMPR) 2) Global Reset (GLOBR) 3) Core Reset (CORER) 4) Physical Function Reset (PFR) EMPR is the largest level of reset that the driver can handle. An EMPR resets the manageability block and also the data path, including PHY and link for all the PFs. The affected PFs are notified of this event through a miscellaneous interrupt. GLOBR is a subset of EMPR. It does everything EMPR does except that it doesn't reset the manageability block. CORER is a subset of GLOBR. It does everything GLOBR does but doesn't reset PHY and link. PFR is a subset of CORER and affects only the given physical function. In other words, PFR can be thought of as a CORER for a single PF. Since only the issuing PF is affected, a PFR doesn't result in the miscellaneous interrupt being triggered. All the resets have the following in common: 1) Tx/Rx is halted and all queues are stopped. 2) All the VSIs and filters programmed for the PF are lost and have to be reprogrammed. 3) Control queue interfaces are reset and have to be reprogrammed. In the rebuild flow, control queues are reinitialized, VSIs are reallocated and filters are restored. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:18 +08:00
__ICE_CORER_REQ, /* set by driver and peers */
__ICE_GLOBR_REQ, /* set by driver and peers */
__ICE_CORER_RECV, /* set by OICR handler */
__ICE_GLOBR_RECV, /* set by OICR handler */
__ICE_EMPR_RECV, /* set by OICR handler */
__ICE_SUSPENDED, /* set on module remove path */
__ICE_RESET_FAILED, /* set by reset/rebuild */
/* When checking for the PF to be in a nominal operating state, the
* bits that are grouped at the beginning of the list need to be
* checked. Bits occurring before __ICE_STATE_NOMINAL_CHECK_BITS will
* be checked. If you need to add a bit into consideration for nominal
* operating state, it must be added before
* __ICE_STATE_NOMINAL_CHECK_BITS. Do not move this entry's position
* without appropriate consideration.
*/
__ICE_STATE_NOMINAL_CHECK_BITS,
__ICE_ADMINQ_EVENT_PENDING,
__ICE_MAILBOXQ_EVENT_PENDING,
__ICE_MDD_EVENT_PENDING,
__ICE_VFLR_EVENT_PENDING,
__ICE_FLTR_OVERFLOW_PROMISC,
__ICE_VF_DIS,
__ICE_CFG_BUSY,
__ICE_SERVICE_SCHED,
__ICE_SERVICE_DIS,
__ICE_STATE_NBITS /* must be last */
};
enum ice_vsi_flags {
ICE_VSI_FLAG_UMAC_FLTR_CHANGED,
ICE_VSI_FLAG_MMAC_FLTR_CHANGED,
ICE_VSI_FLAG_VLAN_FLTR_CHANGED,
ICE_VSI_FLAG_PROMISC_CHANGED,
ICE_VSI_FLAG_NBITS /* must be last */
};
/* struct that defines a VSI, associated with a dev */
struct ice_vsi {
struct net_device *netdev;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_sw *vsw; /* switch this VSI is on */
struct ice_pf *back; /* back pointer to PF */
struct ice_port_info *port_info; /* back pointer to port_info */
struct ice_ring **rx_rings; /* Rx ring array */
struct ice_ring **tx_rings; /* Tx ring array */
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_q_vector **q_vectors; /* q_vector array */
irqreturn_t (*irq_handler)(int irq, void *data);
u64 tx_linearize;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
DECLARE_BITMAP(state, __ICE_STATE_NBITS);
DECLARE_BITMAP(flags, ICE_VSI_FLAG_NBITS);
unsigned int current_netdev_flags;
u32 tx_restart;
u32 tx_busy;
u32 rx_buf_failed;
u32 rx_page_failed;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
int num_q_vectors;
int sw_base_vector; /* Irq base for OS reserved vectors */
int hw_base_vector; /* HW (absolute) index of a vector */
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
enum ice_vsi_type type;
u16 vsi_num; /* HW (absolute) index of this VSI */
u16 idx; /* software index in pf->vsi[] */
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
/* Interrupt thresholds */
u16 work_lmt;
s16 vf_id; /* VF ID for SR-IOV VSIs */
u16 ethtype; /* Ethernet protocol for pause frame */
/* RSS config */
u16 rss_table_size; /* HW RSS table size */
u16 rss_size; /* Allocated RSS queues */
u8 *rss_hkey_user; /* User configured hash keys */
u8 *rss_lut_user; /* User configured lookup table entries */
u8 rss_lut_type; /* used to configure Get/Set RSS LUT AQ call */
u16 max_frame;
u16 rx_buf_len;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_aqc_vsi_props info; /* VSI properties */
/* VSI stats */
struct rtnl_link_stats64 net_stats;
struct ice_eth_stats eth_stats;
struct ice_eth_stats eth_stats_prev;
struct list_head tmp_sync_list; /* MAC filters to be synced */
struct list_head tmp_unsync_list; /* MAC filters to be unsynced */
u8 irqs_ready;
u8 current_isup; /* Sync 'link up' logging */
u8 stat_offsets_loaded;
u8 vlan_ena;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
/* queue information */
u8 tx_mapping_mode; /* ICE_MAP_MODE_[CONTIG|SCATTER] */
u8 rx_mapping_mode; /* ICE_MAP_MODE_[CONTIG|SCATTER] */
u16 txq_map[ICE_MAX_TXQS]; /* index in pf->avail_txqs */
u16 rxq_map[ICE_MAX_RXQS]; /* index in pf->avail_rxqs */
u16 alloc_txq; /* Allocated Tx queues */
u16 num_txq; /* Used Tx queues */
u16 alloc_rxq; /* Allocated Rx queues */
u16 num_rxq; /* Used Rx queues */
u16 num_rx_desc;
u16 num_tx_desc;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_tc_cfg tc_cfg;
} ____cacheline_internodealigned_in_smp;
/* struct that defines an interrupt vector */
struct ice_q_vector {
struct ice_vsi *vsi;
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
u16 v_idx; /* index in the vsi->q_vector array. */
u16 reg_idx;
u8 num_ring_rx; /* total number of Rx rings in vector */
u8 num_ring_tx; /* total number of Tx rings in vector */
u8 itr_countdown; /* when 0 should adjust adaptive ITR */
/* in usecs, need to use ice_intrl_to_usecs_reg() before writing this
* value to the device
*/
u8 intrl;
struct napi_struct napi;
struct ice_ring_container rx;
struct ice_ring_container tx;
cpumask_t affinity_mask;
struct irq_affinity_notify affinity_notify;
char name[ICE_INT_NAME_STR_LEN];
} ____cacheline_internodealigned_in_smp;
enum ice_pf_flags {
ICE_FLAG_MSIX_ENA,
ICE_FLAG_FLTR_SYNC,
ICE_FLAG_RSS_ENA,
ICE_FLAG_SRIOV_ENA,
ICE_FLAG_SRIOV_CAPABLE,
ICE_FLAG_DCB_CAPABLE,
ICE_FLAG_DCB_ENA,
ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA,
ICE_FLAG_DISABLE_FW_LLDP,
ICE_FLAG_ETHTOOL_CTXT, /* set when ethtool holds RTNL lock */
ICE_PF_FLAGS_NBITS /* must be last */
};
struct ice_pf {
struct pci_dev *pdev;
/* OS reserved IRQ details */
struct msix_entry *msix_entries;
struct ice_res_tracker *sw_irq_tracker;
/* HW reserved Interrupts for this PF */
struct ice_res_tracker *hw_irq_tracker;
struct ice_vsi **vsi; /* VSIs created by the driver */
struct ice_sw *first_sw; /* first switch created by firmware */
/* Virtchnl/SR-IOV config info */
struct ice_vf *vf;
int num_alloc_vfs; /* actual number of VFs allocated */
u16 num_vfs_supported; /* num VFs supported for this PF */
u16 num_vf_qps; /* num queue pairs per VF */
u16 num_vf_msix; /* num vectors per VF */
DECLARE_BITMAP(state, __ICE_STATE_NBITS);
DECLARE_BITMAP(avail_txqs, ICE_MAX_TXQS);
DECLARE_BITMAP(avail_rxqs, ICE_MAX_RXQS);
DECLARE_BITMAP(flags, ICE_PF_FLAGS_NBITS);
unsigned long serv_tmr_period;
unsigned long serv_tmr_prev;
struct timer_list serv_tmr;
struct work_struct serv_task;
struct mutex avail_q_mutex; /* protects access to avail_[rx|tx]qs */
struct mutex sw_mutex; /* lock for protecting VSI alloc flow */
u32 msg_enable;
u32 hw_csum_rx_error;
u32 sw_oicr_idx; /* Other interrupt cause SW vector index */
u32 num_avail_sw_msix; /* remaining MSIX SW vectors left unclaimed */
u32 hw_oicr_idx; /* Other interrupt cause vector HW index */
u32 num_avail_hw_msix; /* remaining HW MSIX vectors left unclaimed */
u32 num_lan_msix; /* Total MSIX vectors for base driver */
u16 num_lan_tx; /* num LAN Tx queues setup */
u16 num_lan_rx; /* num LAN Rx queues setup */
u16 q_left_tx; /* remaining num Tx queues left unclaimed */
u16 q_left_rx; /* remaining num Rx queues left unclaimed */
u16 next_vsi; /* Next free slot in pf->vsi[] - 0-based! */
u16 num_alloc_vsi;
ice: Support link events, reset and rebuild Link events are posted to a PF's admin receive queue (ARQ). This patch adds the ability to detect and process link events. This patch also adds the ability to process resets. The driver can process the following resets: 1) EMP Reset (EMPR) 2) Global Reset (GLOBR) 3) Core Reset (CORER) 4) Physical Function Reset (PFR) EMPR is the largest level of reset that the driver can handle. An EMPR resets the manageability block and also the data path, including PHY and link for all the PFs. The affected PFs are notified of this event through a miscellaneous interrupt. GLOBR is a subset of EMPR. It does everything EMPR does except that it doesn't reset the manageability block. CORER is a subset of GLOBR. It does everything GLOBR does but doesn't reset PHY and link. PFR is a subset of CORER and affects only the given physical function. In other words, PFR can be thought of as a CORER for a single PF. Since only the issuing PF is affected, a PFR doesn't result in the miscellaneous interrupt being triggered. All the resets have the following in common: 1) Tx/Rx is halted and all queues are stopped. 2) All the VSIs and filters programmed for the PF are lost and have to be reprogrammed. 3) Control queue interfaces are reset and have to be reprogrammed. In the rebuild flow, control queues are reinitialized, VSIs are reallocated and filters are restored. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:18 +08:00
u16 corer_count; /* Core reset count */
u16 globr_count; /* Global reset count */
u16 empr_count; /* EMP reset count */
u16 pfr_count; /* PF reset count */
struct ice_hw_port_stats stats;
struct ice_hw_port_stats stats_prev;
struct ice_hw hw;
u8 stat_prev_loaded; /* has previous stats been loaded */
#ifdef CONFIG_DCB
u16 dcbx_cap;
#endif /* CONFIG_DCB */
u32 tx_timeout_count;
unsigned long tx_timeout_last_recovery;
u32 tx_timeout_recovery_level;
char int_name[ICE_INT_NAME_STR_LEN];
};
ice: Add support for VSI allocation and deallocation This patch introduces data structures and functions to alloc/free VSIs. The driver represents a VSI using the ice_vsi structure. Some noteworthy points about VSI allocation: 1) A VSI is allocated in the firmware using the "add VSI" admin queue command (implemented as ice_aq_add_vsi). The firmware returns an identifier for the allocated VSI. The VSI context is used to program certain aspects (loopback, queue map, etc.) of the VSI's configuration. 2) A VSI is deleted using the "free VSI" admin queue command (implemented as ice_aq_free_vsi). 3) The driver represents a VSI using struct ice_vsi. This is allocated and initialized as part of the ice_vsi_alloc flow, and deallocated as part of the ice_vsi_delete flow. 4) Once the VSI is created, a netdev is allocated and associated with it. The VSI's ring and vector related data structures are also allocated and initialized. 5) A VSI's queues can either be contiguous or scattered. To do this, the driver maintains a bitmap (vsi->avail_txqs) which is kept in sync with the firmware's VSI queue allocation imap. If the VSI can't get a contiguous queue allocation, it will fallback to scatter. This is implemented in ice_vsi_get_qs which is called as part of the VSI setup flow. In the release flow, the VSI's queues are released and the bitmap is updated to reflect this by ice_vsi_put_qs. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-20 22:58:11 +08:00
struct ice_netdev_priv {
struct ice_vsi *vsi;
};
/**
* ice_irq_dynamic_ena - Enable default interrupt generation settings
* @hw: pointer to HW struct
* @vsi: pointer to VSI struct, can be NULL
* @q_vector: pointer to q_vector, can be NULL
*/
static inline void
ice_irq_dynamic_ena(struct ice_hw *hw, struct ice_vsi *vsi,
struct ice_q_vector *q_vector)
{
u32 vector = (vsi && q_vector) ? q_vector->reg_idx :
((struct ice_pf *)hw->back)->hw_oicr_idx;
int itr = ICE_ITR_NONE;
u32 val;
/* clear the PBA here, as this function is meant to clean out all
* previous interrupts and enable the interrupt
*/
val = GLINT_DYN_CTL_INTENA_M | GLINT_DYN_CTL_CLEARPBA_M |
(itr << GLINT_DYN_CTL_ITR_INDX_S);
if (vsi)
if (test_bit(__ICE_DOWN, vsi->state))
return;
wr32(hw, GLINT_DYN_CTL(vector), val);
}
/**
* ice_find_vsi_by_type - Find and return VSI of a given type
* @pf: PF to search for VSI
* @type: Value indicating type of VSI we are looking for
*/
static inline struct ice_vsi *
ice_find_vsi_by_type(struct ice_pf *pf, enum ice_vsi_type type)
{
int i;
for (i = 0; i < pf->num_alloc_vsi; i++) {
struct ice_vsi *vsi = pf->vsi[i];
if (vsi && vsi->type == type)
return vsi;
}
return NULL;
}
void ice_set_ethtool_ops(struct net_device *netdev);
int ice_up(struct ice_vsi *vsi);
int ice_down(struct ice_vsi *vsi);
int ice_set_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
int ice_get_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size);
void ice_print_link_msg(struct ice_vsi *vsi, bool isup);
void ice_napi_del(struct ice_vsi *vsi);
#ifdef CONFIG_DCB
int ice_pf_ena_all_vsi(struct ice_pf *pf, bool locked);
void ice_pf_dis_all_vsi(struct ice_pf *pf, bool locked);
#endif /* CONFIG_DCB */
#endif /* _ICE_H_ */