0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-24 03:24:55 +08:00
linux/net/ipv4/tcp_rate.c

189 lines
7.4 KiB
C
Raw Normal View History

tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
#include <net/tcp.h>
/* The bandwidth estimator estimates the rate at which the network
* can currently deliver outbound data packets for this flow. At a high
* level, it operates by taking a delivery rate sample for each ACK.
*
* A rate sample records the rate at which the network delivered packets
* for this flow, calculated over the time interval between the transmission
* of a data packet and the acknowledgment of that packet.
*
* Specifically, over the interval between each transmit and corresponding ACK,
* the estimator generates a delivery rate sample. Typically it uses the rate
* at which packets were acknowledged. However, the approach of using only the
* acknowledgment rate faces a challenge under the prevalent ACK decimation or
* compression: packets can temporarily appear to be delivered much quicker
* than the bottleneck rate. Since it is physically impossible to do that in a
* sustained fashion, when the estimator notices that the ACK rate is faster
* than the transmit rate, it uses the latter:
*
* send_rate = #pkts_delivered/(last_snd_time - first_snd_time)
* ack_rate = #pkts_delivered/(last_ack_time - first_ack_time)
* bw = min(send_rate, ack_rate)
*
* Notice the estimator essentially estimates the goodput, not always the
* network bottleneck link rate when the sending or receiving is limited by
* other factors like applications or receiver window limits. The estimator
* deliberately avoids using the inter-packet spacing approach because that
* approach requires a large number of samples and sophisticated filtering.
tcp: track application-limited rate samples This commit adds code to track whether the delivery rate represented by each rate_sample was limited by the application. Upon each transmit, we store in the is_app_limited field in the skb a boolean bit indicating whether there is a known "bubble in the pipe": a point in the rate sample interval where the sender was application-limited, and did not transmit even though the cwnd and pacing rate allowed it. This logic marks the flow app-limited on a write if *all* of the following are true: 1) There is less than 1 MSS of unsent data in the write queue available to transmit. 2) There is no packet in the sender's queues (e.g. in fq or the NIC tx queue). 3) The connection is not limited by cwnd. 4) There are no lost packets to retransmit. The tcp_rate_check_app_limited() code in tcp_rate.c determines whether the connection is application-limited at the moment. If the flow is application-limited, it sets the tp->app_limited field. If the flow is application-limited then that means there is effectively a "bubble" of silence in the pipe now, and this silence will be reflected in a lower bandwidth sample for any rate samples from now until we get an ACK indicating this bubble has exited the pipe: specifically, until we get an ACK for the next packet we transmit. When we send every skb we record in scb->tx.is_app_limited whether the resulting rate sample will be application-limited. The code in tcp_rate_gen() checks to see when it is safe to mark all known application-limited bubbles of silence as having exited the pipe. It does this by checking to see when the delivered count moves past the tp->app_limited marker. At this point it zeroes the tp->app_limited marker, as all known bubbles are out of the pipe. We make room for the tx.is_app_limited bit in the skb by borrowing a bit from the in_flight field used by NV to record the number of bytes in flight. The receive window in the TCP header is 16 bits, and the max receive window scaling shift factor is 14 (RFC 1323). So the max receive window offered by the TCP protocol is 2^(16+14) = 2^30. So we only need 30 bits for the tx.in_flight used by NV. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:15 +08:00
*
* TCP flows can often be application-limited in request/response workloads.
* The estimator marks a bandwidth sample as application-limited if there
* was some moment during the sampled window of packets when there was no data
* ready to send in the write queue.
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
*/
/* Snapshot the current delivery information in the skb, to generate
* a rate sample later when the skb is (s)acked in tcp_rate_skb_delivered().
*/
void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
/* In general we need to start delivery rate samples from the
* time we received the most recent ACK, to ensure we include
* the full time the network needs to deliver all in-flight
* packets. If there are no packets in flight yet, then we
* know that any ACKs after now indicate that the network was
* able to deliver those packets completely in the sampling
* interval between now and the next ACK.
*
* Note that we use packets_out instead of tcp_packets_in_flight(tp)
* because the latter is a guess based on RTO and loss-marking
* heuristics. We don't want spurious RTOs or loss markings to cause
* a spuriously small time interval, causing a spuriously high
* bandwidth estimate.
*/
if (!tp->packets_out) {
tp->first_tx_mstamp = skb->skb_mstamp;
tp->delivered_mstamp = skb->skb_mstamp;
}
TCP_SKB_CB(skb)->tx.first_tx_mstamp = tp->first_tx_mstamp;
TCP_SKB_CB(skb)->tx.delivered_mstamp = tp->delivered_mstamp;
TCP_SKB_CB(skb)->tx.delivered = tp->delivered;
tcp: track application-limited rate samples This commit adds code to track whether the delivery rate represented by each rate_sample was limited by the application. Upon each transmit, we store in the is_app_limited field in the skb a boolean bit indicating whether there is a known "bubble in the pipe": a point in the rate sample interval where the sender was application-limited, and did not transmit even though the cwnd and pacing rate allowed it. This logic marks the flow app-limited on a write if *all* of the following are true: 1) There is less than 1 MSS of unsent data in the write queue available to transmit. 2) There is no packet in the sender's queues (e.g. in fq or the NIC tx queue). 3) The connection is not limited by cwnd. 4) There are no lost packets to retransmit. The tcp_rate_check_app_limited() code in tcp_rate.c determines whether the connection is application-limited at the moment. If the flow is application-limited, it sets the tp->app_limited field. If the flow is application-limited then that means there is effectively a "bubble" of silence in the pipe now, and this silence will be reflected in a lower bandwidth sample for any rate samples from now until we get an ACK indicating this bubble has exited the pipe: specifically, until we get an ACK for the next packet we transmit. When we send every skb we record in scb->tx.is_app_limited whether the resulting rate sample will be application-limited. The code in tcp_rate_gen() checks to see when it is safe to mark all known application-limited bubbles of silence as having exited the pipe. It does this by checking to see when the delivered count moves past the tp->app_limited marker. At this point it zeroes the tp->app_limited marker, as all known bubbles are out of the pipe. We make room for the tx.is_app_limited bit in the skb by borrowing a bit from the in_flight field used by NV to record the number of bytes in flight. The receive window in the TCP header is 16 bits, and the max receive window scaling shift factor is 14 (RFC 1323). So the max receive window offered by the TCP protocol is 2^(16+14) = 2^30. So we only need 30 bits for the tx.in_flight used by NV. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:15 +08:00
TCP_SKB_CB(skb)->tx.is_app_limited = tp->app_limited ? 1 : 0;
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
}
/* When an skb is sacked or acked, we fill in the rate sample with the (prior)
* delivery information when the skb was last transmitted.
*
* If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is
* called multiple times. We favor the information from the most recently
* sent skb, i.e., the skb with the highest prior_delivered count.
*/
void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb,
struct rate_sample *rs)
{
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
if (!scb->tx.delivered_mstamp)
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
return;
if (!rs->prior_delivered ||
after(scb->tx.delivered, rs->prior_delivered)) {
rs->prior_delivered = scb->tx.delivered;
rs->prior_mstamp = scb->tx.delivered_mstamp;
tcp: track application-limited rate samples This commit adds code to track whether the delivery rate represented by each rate_sample was limited by the application. Upon each transmit, we store in the is_app_limited field in the skb a boolean bit indicating whether there is a known "bubble in the pipe": a point in the rate sample interval where the sender was application-limited, and did not transmit even though the cwnd and pacing rate allowed it. This logic marks the flow app-limited on a write if *all* of the following are true: 1) There is less than 1 MSS of unsent data in the write queue available to transmit. 2) There is no packet in the sender's queues (e.g. in fq or the NIC tx queue). 3) The connection is not limited by cwnd. 4) There are no lost packets to retransmit. The tcp_rate_check_app_limited() code in tcp_rate.c determines whether the connection is application-limited at the moment. If the flow is application-limited, it sets the tp->app_limited field. If the flow is application-limited then that means there is effectively a "bubble" of silence in the pipe now, and this silence will be reflected in a lower bandwidth sample for any rate samples from now until we get an ACK indicating this bubble has exited the pipe: specifically, until we get an ACK for the next packet we transmit. When we send every skb we record in scb->tx.is_app_limited whether the resulting rate sample will be application-limited. The code in tcp_rate_gen() checks to see when it is safe to mark all known application-limited bubbles of silence as having exited the pipe. It does this by checking to see when the delivered count moves past the tp->app_limited marker. At this point it zeroes the tp->app_limited marker, as all known bubbles are out of the pipe. We make room for the tx.is_app_limited bit in the skb by borrowing a bit from the in_flight field used by NV to record the number of bytes in flight. The receive window in the TCP header is 16 bits, and the max receive window scaling shift factor is 14 (RFC 1323). So the max receive window offered by the TCP protocol is 2^(16+14) = 2^30. So we only need 30 bits for the tx.in_flight used by NV. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:15 +08:00
rs->is_app_limited = scb->tx.is_app_limited;
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
rs->is_retrans = scb->sacked & TCPCB_RETRANS;
/* Find the duration of the "send phase" of this window: */
rs->interval_us = tcp_stamp_us_delta(
skb->skb_mstamp,
scb->tx.first_tx_mstamp);
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
/* Record send time of most recently ACKed packet: */
tp->first_tx_mstamp = skb->skb_mstamp;
}
/* Mark off the skb delivered once it's sacked to avoid being
* used again when it's cumulatively acked. For acked packets
* we don't need to reset since it'll be freed soon.
*/
if (scb->sacked & TCPCB_SACKED_ACKED)
scb->tx.delivered_mstamp = 0;
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
}
/* Update the connection delivery information and generate a rate sample. */
void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost,
struct rate_sample *rs)
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
{
struct tcp_sock *tp = tcp_sk(sk);
u32 snd_us, ack_us;
tcp: track application-limited rate samples This commit adds code to track whether the delivery rate represented by each rate_sample was limited by the application. Upon each transmit, we store in the is_app_limited field in the skb a boolean bit indicating whether there is a known "bubble in the pipe": a point in the rate sample interval where the sender was application-limited, and did not transmit even though the cwnd and pacing rate allowed it. This logic marks the flow app-limited on a write if *all* of the following are true: 1) There is less than 1 MSS of unsent data in the write queue available to transmit. 2) There is no packet in the sender's queues (e.g. in fq or the NIC tx queue). 3) The connection is not limited by cwnd. 4) There are no lost packets to retransmit. The tcp_rate_check_app_limited() code in tcp_rate.c determines whether the connection is application-limited at the moment. If the flow is application-limited, it sets the tp->app_limited field. If the flow is application-limited then that means there is effectively a "bubble" of silence in the pipe now, and this silence will be reflected in a lower bandwidth sample for any rate samples from now until we get an ACK indicating this bubble has exited the pipe: specifically, until we get an ACK for the next packet we transmit. When we send every skb we record in scb->tx.is_app_limited whether the resulting rate sample will be application-limited. The code in tcp_rate_gen() checks to see when it is safe to mark all known application-limited bubbles of silence as having exited the pipe. It does this by checking to see when the delivered count moves past the tp->app_limited marker. At this point it zeroes the tp->app_limited marker, as all known bubbles are out of the pipe. We make room for the tx.is_app_limited bit in the skb by borrowing a bit from the in_flight field used by NV to record the number of bytes in flight. The receive window in the TCP header is 16 bits, and the max receive window scaling shift factor is 14 (RFC 1323). So the max receive window offered by the TCP protocol is 2^(16+14) = 2^30. So we only need 30 bits for the tx.in_flight used by NV. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:15 +08:00
/* Clear app limited if bubble is acked and gone. */
if (tp->app_limited && after(tp->delivered, tp->app_limited))
tp->app_limited = 0;
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
/* TODO: there are multiple places throughout tcp_ack() to get
* current time. Refactor the code using a new "tcp_acktag_state"
* to carry current time, flags, stats like "tcp_sacktag_state".
*/
if (delivered)
tp->delivered_mstamp = tp->tcp_mstamp;
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
rs->acked_sacked = delivered; /* freshly ACKed or SACKed */
rs->losses = lost; /* freshly marked lost */
/* Return an invalid sample if no timing information is available. */
if (!rs->prior_mstamp) {
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
rs->delivered = -1;
rs->interval_us = -1;
return;
}
rs->delivered = tp->delivered - rs->prior_delivered;
/* Model sending data and receiving ACKs as separate pipeline phases
* for a window. Usually the ACK phase is longer, but with ACK
* compression the send phase can be longer. To be safe we use the
* longer phase.
*/
snd_us = rs->interval_us; /* send phase */
ack_us = tcp_stamp_us_delta(tp->tcp_mstamp,
rs->prior_mstamp); /* ack phase */
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
rs->interval_us = max(snd_us, ack_us);
/* Normally we expect interval_us >= min-rtt.
* Note that rate may still be over-estimated when a spuriously
* retransmistted skb was first (s)acked because "interval_us"
* is under-estimated (up to an RTT). However continuously
* measuring the delivery rate during loss recovery is crucial
* for connections suffer heavy or prolonged losses.
*/
if (unlikely(rs->interval_us < tcp_min_rtt(tp))) {
if (!rs->is_retrans)
pr_debug("tcp rate: %ld %d %u %u %u\n",
rs->interval_us, rs->delivered,
inet_csk(sk)->icsk_ca_state,
tp->rx_opt.sack_ok, tcp_min_rtt(tp));
rs->interval_us = -1;
return;
}
/* Record the last non-app-limited or the highest app-limited bw */
if (!rs->is_app_limited ||
((u64)rs->delivered * tp->rate_interval_us >=
(u64)tp->rate_delivered * rs->interval_us)) {
tp->rate_delivered = rs->delivered;
tp->rate_interval_us = rs->interval_us;
tp->rate_app_limited = rs->is_app_limited;
tcp: track data delivery rate for a TCP connection This patch generates data delivery rate (throughput) samples on a per-ACK basis. These rate samples can be used by congestion control modules, and specifically will be used by TCP BBR in later patches in this series. Key state: tp->delivered: Tracks the total number of data packets (original or not) delivered so far. This is an already-existing field. tp->delivered_mstamp: the last time tp->delivered was updated. Algorithm: A rate sample is calculated as (d1 - d0)/(t1 - t0) on a per-ACK basis: d1: the current tp->delivered after processing the ACK t1: the current time after processing the ACK d0: the prior tp->delivered when the acked skb was transmitted t0: the prior tp->delivered_mstamp when the acked skb was transmitted When an skb is transmitted, we snapshot d0 and t0 in its control block in tcp_rate_skb_sent(). When an ACK arrives, it may SACK and ACK some skbs. For each SACKed or ACKed skb, tcp_rate_skb_delivered() updates the rate_sample struct to reflect the latest (d0, t0). Finally, tcp_rate_gen() generates a rate sample by storing (d1 - d0) in rs->delivered and (t1 - t0) in rs->interval_us. One caveat: if an skb was sent with no packets in flight, then tp->delivered_mstamp may be either invalid (if the connection is starting) or outdated (if the connection was idle). In that case, we'll re-stamp tp->delivered_mstamp. At first glance it seems t0 should always be the time when an skb was transmitted, but actually this could over-estimate the rate due to phase mismatch between transmit and ACK events. To track the delivery rate, we ensure that if packets are in flight then t0 and and t1 are times at which packets were marked delivered. If the initial and final RTTs are different then one may be corrupted by some sort of noise. The noise we see most often is sending gaps caused by delayed, compressed, or stretched acks. This either affects both RTTs equally or artificially reduces the final RTT. We approach this by recording the info we need to compute the initial RTT (duration of the "send phase" of the window) when we recorded the associated inflight. Then, for a filter to avoid bandwidth overestimates, we generalize the per-sample bandwidth computation from: bw = delivered / ack_phase_rtt to the following: bw = delivered / max(send_phase_rtt, ack_phase_rtt) In large-scale experiments, this filtering approach incorporating send_phase_rtt is effective at avoiding bandwidth overestimates due to ACK compression or stretched ACKs. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:14 +08:00
}
}
tcp: track application-limited rate samples This commit adds code to track whether the delivery rate represented by each rate_sample was limited by the application. Upon each transmit, we store in the is_app_limited field in the skb a boolean bit indicating whether there is a known "bubble in the pipe": a point in the rate sample interval where the sender was application-limited, and did not transmit even though the cwnd and pacing rate allowed it. This logic marks the flow app-limited on a write if *all* of the following are true: 1) There is less than 1 MSS of unsent data in the write queue available to transmit. 2) There is no packet in the sender's queues (e.g. in fq or the NIC tx queue). 3) The connection is not limited by cwnd. 4) There are no lost packets to retransmit. The tcp_rate_check_app_limited() code in tcp_rate.c determines whether the connection is application-limited at the moment. If the flow is application-limited, it sets the tp->app_limited field. If the flow is application-limited then that means there is effectively a "bubble" of silence in the pipe now, and this silence will be reflected in a lower bandwidth sample for any rate samples from now until we get an ACK indicating this bubble has exited the pipe: specifically, until we get an ACK for the next packet we transmit. When we send every skb we record in scb->tx.is_app_limited whether the resulting rate sample will be application-limited. The code in tcp_rate_gen() checks to see when it is safe to mark all known application-limited bubbles of silence as having exited the pipe. It does this by checking to see when the delivered count moves past the tp->app_limited marker. At this point it zeroes the tp->app_limited marker, as all known bubbles are out of the pipe. We make room for the tx.is_app_limited bit in the skb by borrowing a bit from the in_flight field used by NV to record the number of bytes in flight. The receive window in the TCP header is 16 bits, and the max receive window scaling shift factor is 14 (RFC 1323). So the max receive window offered by the TCP protocol is 2^(16+14) = 2^30. So we only need 30 bits for the tx.in_flight used by NV. Signed-off-by: Van Jacobson <vanj@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 11:39:15 +08:00
/* If a gap is detected between sends, mark the socket application-limited. */
void tcp_rate_check_app_limited(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
if (/* We have less than one packet to send. */
tp->write_seq - tp->snd_nxt < tp->mss_cache &&
/* Nothing in sending host's qdisc queues or NIC tx queue. */
sk_wmem_alloc_get(sk) < SKB_TRUESIZE(1) &&
/* We are not limited by CWND. */
tcp_packets_in_flight(tp) < tp->snd_cwnd &&
/* All lost packets have been retransmitted. */
tp->lost_out <= tp->retrans_out)
tp->app_limited =
(tp->delivered + tcp_packets_in_flight(tp)) ? : 1;
}
EXPORT_SYMBOL_GPL(tcp_rate_check_app_limited);