linux/tools/testing/selftests/lib.mk

103 lines
3.4 KiB
Makefile
Raw Normal View History

# This mimics the top-level Makefile. We do it explicitly here so that this
# Makefile can operate with or without the kbuild infrastructure.
CC := $(CROSS_COMPILE)gcc
ifeq (0,$(MAKELEVEL))
OUTPUT := $(shell pwd)
endif
# The following are built by lib.mk common compile rules.
# TEST_CUSTOM_PROGS should be used by tests that require
# custom build rule and prevent common build rule use.
# TEST_PROGS are for test shell scripts.
# TEST_CUSTOM_PROGS and TEST_PROGS will be run by common run_tests
# and install targets. Common clean doesn't touch them.
TEST_GEN_PROGS := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS))
TEST_GEN_PROGS_EXTENDED := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS_EXTENDED))
TEST_GEN_FILES := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_FILES))
all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES)
selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format Change common RUN_TESTS to print messages in user friendly TAP13 format. This change add TAP13 header at the start of RUN_TESTS target run, and prints the resulting pass/fail messages with test number information in the TAP 13 format for each test in the run tests list. This change covers test scripts as well as test programs. Test programs have an option to use ksft_ API, however test scripts won't be able to. With this change, test scripts can print TAP13 format output without any changes to individual scripts. Test programs can provide TAP13 format output as needed as some tests already do. Tests that haven't been converted will benefit from this change. Tests that are converted benefit from the test counts for all the tests in each test directory. Running firmware tests: make --silent -C tools/testing/selftests/firmware/ run_tests Before the change: modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y selftests: fw_filesystem.sh [FAIL] modprobe: ERROR: could not insert 'test_firmware': Operation not permitted selftests: fw_fallback.sh [FAIL] After the change: TAP version 13 selftests: fw_filesystem.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y not ok 1..1 selftests: fw_filesystem.sh [FAIL] selftests: fw_fallback.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted not ok 1..2 selftests: fw_fallback.sh [FAIL] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-24 08:46:00 +08:00
.ONESHELL:
define RUN_TESTS
selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format Change common RUN_TESTS to print messages in user friendly TAP13 format. This change add TAP13 header at the start of RUN_TESTS target run, and prints the resulting pass/fail messages with test number information in the TAP 13 format for each test in the run tests list. This change covers test scripts as well as test programs. Test programs have an option to use ksft_ API, however test scripts won't be able to. With this change, test scripts can print TAP13 format output without any changes to individual scripts. Test programs can provide TAP13 format output as needed as some tests already do. Tests that haven't been converted will benefit from this change. Tests that are converted benefit from the test counts for all the tests in each test directory. Running firmware tests: make --silent -C tools/testing/selftests/firmware/ run_tests Before the change: modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y selftests: fw_filesystem.sh [FAIL] modprobe: ERROR: could not insert 'test_firmware': Operation not permitted selftests: fw_fallback.sh [FAIL] After the change: TAP version 13 selftests: fw_filesystem.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y not ok 1..1 selftests: fw_filesystem.sh [FAIL] selftests: fw_fallback.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted not ok 1..2 selftests: fw_fallback.sh [FAIL] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-24 08:46:00 +08:00
@test_num=`echo 0`;
@echo "TAP version 13";
@for TEST in $(1); do \
BASENAME_TEST=`basename $$TEST`; \
selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format Change common RUN_TESTS to print messages in user friendly TAP13 format. This change add TAP13 header at the start of RUN_TESTS target run, and prints the resulting pass/fail messages with test number information in the TAP 13 format for each test in the run tests list. This change covers test scripts as well as test programs. Test programs have an option to use ksft_ API, however test scripts won't be able to. With this change, test scripts can print TAP13 format output without any changes to individual scripts. Test programs can provide TAP13 format output as needed as some tests already do. Tests that haven't been converted will benefit from this change. Tests that are converted benefit from the test counts for all the tests in each test directory. Running firmware tests: make --silent -C tools/testing/selftests/firmware/ run_tests Before the change: modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y selftests: fw_filesystem.sh [FAIL] modprobe: ERROR: could not insert 'test_firmware': Operation not permitted selftests: fw_fallback.sh [FAIL] After the change: TAP version 13 selftests: fw_filesystem.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y not ok 1..1 selftests: fw_filesystem.sh [FAIL] selftests: fw_fallback.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted not ok 1..2 selftests: fw_fallback.sh [FAIL] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-24 08:46:00 +08:00
test_num=`echo $$test_num+1 | bc`; \
echo "selftests: $$BASENAME_TEST"; \
echo "========================================"; \
if [ ! -x $$TEST ]; then \
echo "selftests: Warning: file $$BASENAME_TEST is not executable, correct this.";\
selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format Change common RUN_TESTS to print messages in user friendly TAP13 format. This change add TAP13 header at the start of RUN_TESTS target run, and prints the resulting pass/fail messages with test number information in the TAP 13 format for each test in the run tests list. This change covers test scripts as well as test programs. Test programs have an option to use ksft_ API, however test scripts won't be able to. With this change, test scripts can print TAP13 format output without any changes to individual scripts. Test programs can provide TAP13 format output as needed as some tests already do. Tests that haven't been converted will benefit from this change. Tests that are converted benefit from the test counts for all the tests in each test directory. Running firmware tests: make --silent -C tools/testing/selftests/firmware/ run_tests Before the change: modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y selftests: fw_filesystem.sh [FAIL] modprobe: ERROR: could not insert 'test_firmware': Operation not permitted selftests: fw_fallback.sh [FAIL] After the change: TAP version 13 selftests: fw_filesystem.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted ./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present You must have the following enabled in your kernel: CONFIG_TEST_FIRMWARE=y not ok 1..1 selftests: fw_filesystem.sh [FAIL] selftests: fw_fallback.sh ======================================== modprobe: ERROR: could not insert 'test_firmware': Operation not permitted not ok 1..2 selftests: fw_fallback.sh [FAIL] Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-24 08:46:00 +08:00
echo "not ok 1..$$test_num selftests: $$BASENAME_TEST [FAIL]"; \
else \
cd `dirname $$TEST` > /dev/null; (./$$BASENAME_TEST > /tmp/$$BASENAME_TEST 2>&1 && echo "ok 1..$$test_num selftests: $$BASENAME_TEST [PASS]") || echo "not ok 1..$$test_num selftests: $$BASENAME_TEST [FAIL]"; cd - > /dev/null;\
fi; \
done;
endef
run_tests: all
$(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_PROGS))
define INSTALL_RULE
@if [ "X$(TEST_PROGS)$(TEST_PROGS_EXTENDED)$(TEST_FILES)" != "X" ]; then \
mkdir -p ${INSTALL_PATH}; \
echo "rsync -a $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) $(INSTALL_PATH)/"; \
rsync -a $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) $(INSTALL_PATH)/; \
fi
@if [ "X$(TEST_GEN_PROGS)$(TEST_CUSTOM_PROGS)$(TEST_GEN_PROGS_EXTENDED)$(TEST_GEN_FILES)" != "X" ]; then \
mkdir -p ${INSTALL_PATH}; \
echo "rsync -a $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(INSTALL_PATH)/"; \
rsync -a $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(INSTALL_PATH)/; \
fi
endef
install: all
ifdef INSTALL_PATH
$(INSTALL_RULE)
else
$(error Error: set INSTALL_PATH to use install)
endif
define EMIT_TESTS
@for TEST in $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_PROGS); do \
BASENAME_TEST=`basename $$TEST`; \
echo "(./$$BASENAME_TEST > /tmp/$$BASENAME_TEST 2>&1 && echo \"selftests: $$BASENAME_TEST [PASS]\") || echo \"selftests: $$BASENAME_TEST [FAIL]\""; \
done;
endef
emit_tests:
$(EMIT_TESTS)
# define if isn't already. It is undefined in make O= case.
ifeq ($(RM),)
RM := rm -f
endif
define CLEAN
$(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN)
endef
clean:
$(CLEAN)
# When make O= with kselftest target from main level
# the following aren't defined.
#
ifneq ($(KBUILD_SRC),)
LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)
COMPILE.S = $(CC) $(ASFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c
LINK.S = $(CC) $(ASFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)
endif
$(OUTPUT)/%:%.c
selftests: Fix the .c linking rule Currently we can't build some tests, for example: $ make -C tools/testing/selftests/ TARGETS=vm ... gcc -Wall -I ../../../../usr/include -lrt -lpthread ../../../../usr/include/linux/kernel.h userfaultfd.c -o tools/testing/selftests/vm/userfaultfd /tmp/ccmOkQSM.o: In function `stress': userfaultfd.c:(.text+0xc60): undefined reference to `pthread_create' userfaultfd.c:(.text+0xca5): undefined reference to `pthread_create' userfaultfd.c:(.text+0xcee): undefined reference to `pthread_create' userfaultfd.c:(.text+0xd30): undefined reference to `pthread_create' userfaultfd.c:(.text+0xd77): undefined reference to `pthread_join' userfaultfd.c:(.text+0xe7d): undefined reference to `pthread_join' userfaultfd.c:(.text+0xe9f): undefined reference to `pthread_cancel' userfaultfd.c:(.text+0xec6): undefined reference to `pthread_join' userfaultfd.c:(.text+0xf14): undefined reference to `pthread_join' /tmp/ccmOkQSM.o: In function `userfaultfd_stress': userfaultfd.c:(.text+0x13e2): undefined reference to `pthread_attr_setstacksize' collect2: error: ld returned 1 exit status This is because the rule for linking .c files to binaries is incorrect. The first bug is that it uses $< (first prerequisite) instead of $^ (all preqrequisites), fix it by using ^$. Secondly the ordering of the prerequisites vs $(LDLIBS) is wrong, meaning on toolchains that use --as-needed we fail to link (as above). Fix that by placing $(LDLIBS) *after* ^$. Finally switch to using the default rule $(LINK.c), so that we get $(CPPFLAGS) etc. included. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-02-09 16:56:27 +08:00
$(LINK.c) $^ $(LDLIBS) -o $@
$(OUTPUT)/%.o:%.S
$(COMPILE.S) $^ -o $@
$(OUTPUT)/%:%.S
$(LINK.S) $^ $(LDLIBS) -o $@
.PHONY: run_tests all clean install emit_tests