linux/drivers/usb/gadget/ci13xxx_udc.c

2995 lines
72 KiB
C
Raw Normal View History

/*
* ci13xxx_udc.c - MIPS USB IP core family device controller
*
* Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
*
* Author: David Lopo
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Description: MIPS USB IP core family device controller
* Currently it only supports IP part number CI13412
*
* This driver is composed of several blocks:
* - HW: hardware interface
* - DBG: debug facilities (optional)
* - UTIL: utilities
* - ISR: interrupts handling
* - ENDPT: endpoint operations (Gadget API)
* - GADGET: gadget operations (Gadget API)
* - BUS: bus glue code, bus abstraction layer
*
* Compile Options
* - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
* - STALL_IN: non-empty bulk-in pipes cannot be halted
* if defined mass storage compliance succeeds but with warnings
* => case 4: Hi > Dn
* => case 5: Hi > Di
* => case 8: Hi <> Do
* if undefined usbtest 13 fails
* - TRACE: enable function tracing (depends on DEBUG)
*
* Main Features
* - Chapter 9 & Mass Storage Compliance with Gadget File Storage
* - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
* - Normal & LPM support
*
* USBTEST Report
* - OK: 0-12, 13 (STALL_IN defined) & 14
* - Not Supported: 15 & 16 (ISO)
*
* TODO List
* - OTG
* - Isochronous & Interrupt Traffic
* - Handle requests which spawns into several TDs
* - GET_STATUS(device) - always reports 0
* - Gadget API (majority of optional features)
* - Suspend & Remote Wakeup
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include "ci13xxx_udc.h"
/******************************************************************************
* DEFINE
*****************************************************************************/
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
/* ctrl register bank access */
static DEFINE_SPINLOCK(udc_lock);
/* control endpoint description */
static const struct usb_endpoint_descriptor
ctrl_endpt_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
.wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
};
static const struct usb_endpoint_descriptor
ctrl_endpt_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
.wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
};
/* UDC descriptor */
static struct ci13xxx *_udc;
/* Interrupt statistics */
#define ISR_MASK 0x1F
static struct {
u32 test;
u32 ui;
u32 uei;
u32 pci;
u32 uri;
u32 sli;
u32 none;
struct {
u32 cnt;
u32 buf[ISR_MASK+1];
u32 idx;
} hndl;
} isr_statistics;
/**
* ffs_nr: find first (least significant) bit set
* @x: the word to search
*
* This function returns bit number (instead of position)
*/
static int ffs_nr(u32 x)
{
int n = ffs(x);
return n ? n-1 : 32;
}
/******************************************************************************
* HW block
*****************************************************************************/
/* register bank descriptor */
static struct {
unsigned lpm; /* is LPM? */
void __iomem *abs; /* bus map offset */
void __iomem *cap; /* bus map offset + CAP offset + CAP data */
size_t size; /* bank size */
} hw_bank;
/* MSM specific */
#define ABS_AHBBURST (0x0090UL)
#define ABS_AHBMODE (0x0098UL)
/* UDC register map */
#define ABS_CAPLENGTH (0x100UL)
#define ABS_HCCPARAMS (0x108UL)
#define ABS_DCCPARAMS (0x124UL)
#define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL)
/* offset to CAPLENTGH (addr + data) */
#define CAP_USBCMD (0x000UL)
#define CAP_USBSTS (0x004UL)
#define CAP_USBINTR (0x008UL)
#define CAP_DEVICEADDR (0x014UL)
#define CAP_ENDPTLISTADDR (0x018UL)
#define CAP_PORTSC (0x044UL)
#define CAP_DEVLC (0x084UL)
#define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL)
#define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
#define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL)
#define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL)
#define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL)
#define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL)
#define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL)
#define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL)
/* maximum number of enpoints: valid only after hw_device_reset() */
static unsigned hw_ep_max;
/**
* hw_ep_bit: calculates the bit number
* @num: endpoint number
* @dir: endpoint direction
*
* This function returns bit number
*/
static inline int hw_ep_bit(int num, int dir)
{
return num + (dir ? 16 : 0);
}
static int ep_to_bit(int n)
{
int fill = 16 - hw_ep_max / 2;
if (n >= hw_ep_max / 2)
n += fill;
return n;
}
/**
* hw_aread: reads from register bitfield
* @addr: address relative to bus map
* @mask: bitfield mask
*
* This function returns register bitfield data
*/
static u32 hw_aread(u32 addr, u32 mask)
{
return ioread32(addr + hw_bank.abs) & mask;
}
/**
* hw_awrite: writes to register bitfield
* @addr: address relative to bus map
* @mask: bitfield mask
* @data: new data
*/
static void hw_awrite(u32 addr, u32 mask, u32 data)
{
iowrite32(hw_aread(addr, ~mask) | (data & mask),
addr + hw_bank.abs);
}
/**
* hw_cread: reads from register bitfield
* @addr: address relative to CAP offset plus content
* @mask: bitfield mask
*
* This function returns register bitfield data
*/
static u32 hw_cread(u32 addr, u32 mask)
{
return ioread32(addr + hw_bank.cap) & mask;
}
/**
* hw_cwrite: writes to register bitfield
* @addr: address relative to CAP offset plus content
* @mask: bitfield mask
* @data: new data
*/
static void hw_cwrite(u32 addr, u32 mask, u32 data)
{
iowrite32(hw_cread(addr, ~mask) | (data & mask),
addr + hw_bank.cap);
}
/**
* hw_ctest_and_clear: tests & clears register bitfield
* @addr: address relative to CAP offset plus content
* @mask: bitfield mask
*
* This function returns register bitfield data
*/
static u32 hw_ctest_and_clear(u32 addr, u32 mask)
{
u32 reg = hw_cread(addr, mask);
iowrite32(reg, addr + hw_bank.cap);
return reg;
}
/**
* hw_ctest_and_write: tests & writes register bitfield
* @addr: address relative to CAP offset plus content
* @mask: bitfield mask
* @data: new data
*
* This function returns register bitfield data
*/
static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data)
{
u32 reg = hw_cread(addr, ~0);
iowrite32((reg & ~mask) | (data & mask), addr + hw_bank.cap);
return (reg & mask) >> ffs_nr(mask);
}
static int hw_device_init(void __iomem *base)
{
u32 reg;
/* bank is a module variable */
hw_bank.abs = base;
hw_bank.cap = hw_bank.abs;
hw_bank.cap += ABS_CAPLENGTH;
hw_bank.cap += ioread8(hw_bank.cap);
reg = hw_aread(ABS_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN);
hw_bank.lpm = reg;
hw_bank.size = hw_bank.cap - hw_bank.abs;
hw_bank.size += CAP_LAST;
hw_bank.size /= sizeof(u32);
reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX)
return -ENODEV;
/* setup lock mode ? */
/* ENDPTSETUPSTAT is '0' by default */
/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
return 0;
}
/**
* hw_device_reset: resets chip (execute without interruption)
* @base: register base address
*
* This function returns an error code
*/
static int hw_device_reset(struct ci13xxx *udc)
{
/* should flush & stop before reset */
hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0);
hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
hw_cwrite(CAP_USBCMD, USBCMD_RST, USBCMD_RST);
while (hw_cread(CAP_USBCMD, USBCMD_RST))
udelay(10); /* not RTOS friendly */
if (udc->udc_driver->notify_event)
udc->udc_driver->notify_event(udc,
CI13XXX_CONTROLLER_RESET_EVENT);
if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING)
hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS);
/* USBMODE should be configured step by step */
hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE);
hw_cwrite(CAP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); /* HW >= 2.3 */
if (hw_cread(CAP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) {
pr_err("cannot enter in device mode");
pr_err("lpm = %i", hw_bank.lpm);
return -ENODEV;
}
return 0;
}
/**
* hw_device_state: enables/disables interrupts & starts/stops device (execute
* without interruption)
* @dma: 0 => disable, !0 => enable and set dma engine
*
* This function returns an error code
*/
static int hw_device_state(u32 dma)
{
if (dma) {
hw_cwrite(CAP_ENDPTLISTADDR, ~0, dma);
/* interrupt, error, port change, reset, sleep/suspend */
hw_cwrite(CAP_USBINTR, ~0,
USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
hw_cwrite(CAP_USBCMD, USBCMD_RS, USBCMD_RS);
} else {
hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
hw_cwrite(CAP_USBINTR, ~0, 0);
}
return 0;
}
/**
* hw_ep_flush: flush endpoint fifo (execute without interruption)
* @num: endpoint number
* @dir: endpoint direction
*
* This function returns an error code
*/
static int hw_ep_flush(int num, int dir)
{
int n = hw_ep_bit(num, dir);
do {
/* flush any pending transfer */
hw_cwrite(CAP_ENDPTFLUSH, BIT(n), BIT(n));
while (hw_cread(CAP_ENDPTFLUSH, BIT(n)))
cpu_relax();
} while (hw_cread(CAP_ENDPTSTAT, BIT(n)));
return 0;
}
/**
* hw_ep_disable: disables endpoint (execute without interruption)
* @num: endpoint number
* @dir: endpoint direction
*
* This function returns an error code
*/
static int hw_ep_disable(int num, int dir)
{
hw_ep_flush(num, dir);
hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32),
dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
return 0;
}
/**
* hw_ep_enable: enables endpoint (execute without interruption)
* @num: endpoint number
* @dir: endpoint direction
* @type: endpoint type
*
* This function returns an error code
*/
static int hw_ep_enable(int num, int dir, int type)
{
u32 mask, data;
if (dir) {
mask = ENDPTCTRL_TXT; /* type */
data = type << ffs_nr(mask);
mask |= ENDPTCTRL_TXS; /* unstall */
mask |= ENDPTCTRL_TXR; /* reset data toggle */
data |= ENDPTCTRL_TXR;
mask |= ENDPTCTRL_TXE; /* enable */
data |= ENDPTCTRL_TXE;
} else {
mask = ENDPTCTRL_RXT; /* type */
data = type << ffs_nr(mask);
mask |= ENDPTCTRL_RXS; /* unstall */
mask |= ENDPTCTRL_RXR; /* reset data toggle */
data |= ENDPTCTRL_RXR;
mask |= ENDPTCTRL_RXE; /* enable */
data |= ENDPTCTRL_RXE;
}
hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), mask, data);
return 0;
}
/**
* hw_ep_get_halt: return endpoint halt status
* @num: endpoint number
* @dir: endpoint direction
*
* This function returns 1 if endpoint halted
*/
static int hw_ep_get_halt(int num, int dir)
{
u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
return hw_cread(CAP_ENDPTCTRL + num * sizeof(u32), mask) ? 1 : 0;
}
/**
* hw_test_and_clear_setup_status: test & clear setup status (execute without
* interruption)
* @n: endpoint number
*
* This function returns setup status
*/
static int hw_test_and_clear_setup_status(int n)
{
n = ep_to_bit(n);
return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n));
}
/**
* hw_ep_prime: primes endpoint (execute without interruption)
* @num: endpoint number
* @dir: endpoint direction
* @is_ctrl: true if control endpoint
*
* This function returns an error code
*/
static int hw_ep_prime(int num, int dir, int is_ctrl)
{
int n = hw_ep_bit(num, dir);
if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num)))
return -EAGAIN;
hw_cwrite(CAP_ENDPTPRIME, BIT(n), BIT(n));
while (hw_cread(CAP_ENDPTPRIME, BIT(n)))
cpu_relax();
if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num)))
return -EAGAIN;
/* status shoult be tested according with manual but it doesn't work */
return 0;
}
/**
* hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
* without interruption)
* @num: endpoint number
* @dir: endpoint direction
* @value: true => stall, false => unstall
*
* This function returns an error code
*/
static int hw_ep_set_halt(int num, int dir, int value)
{
if (value != 0 && value != 1)
return -EINVAL;
do {
u32 addr = CAP_ENDPTCTRL + num * sizeof(u32);
u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
/* data toggle - reserved for EP0 but it's in ESS */
hw_cwrite(addr, mask_xs|mask_xr, value ? mask_xs : mask_xr);
} while (value != hw_ep_get_halt(num, dir));
return 0;
}
/**
* hw_intr_clear: disables interrupt & clears interrupt status (execute without
* interruption)
* @n: interrupt bit
*
* This function returns an error code
*/
static int hw_intr_clear(int n)
{
if (n >= REG_BITS)
return -EINVAL;
hw_cwrite(CAP_USBINTR, BIT(n), 0);
hw_cwrite(CAP_USBSTS, BIT(n), BIT(n));
return 0;
}
/**
* hw_intr_force: enables interrupt & forces interrupt status (execute without
* interruption)
* @n: interrupt bit
*
* This function returns an error code
*/
static int hw_intr_force(int n)
{
if (n >= REG_BITS)
return -EINVAL;
hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
hw_cwrite(CAP_USBINTR, BIT(n), BIT(n));
hw_cwrite(CAP_USBSTS, BIT(n), BIT(n));
hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, 0);
return 0;
}
/**
* hw_is_port_high_speed: test if port is high speed
*
* This function returns true if high speed port
*/
static int hw_port_is_high_speed(void)
{
return hw_bank.lpm ? hw_cread(CAP_DEVLC, DEVLC_PSPD) :
hw_cread(CAP_PORTSC, PORTSC_HSP);
}
/**
* hw_port_test_get: reads port test mode value
*
* This function returns port test mode value
*/
static u8 hw_port_test_get(void)
{
return hw_cread(CAP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC);
}
/**
* hw_port_test_set: writes port test mode (execute without interruption)
* @mode: new value
*
* This function returns an error code
*/
static int hw_port_test_set(u8 mode)
{
const u8 TEST_MODE_MAX = 7;
if (mode > TEST_MODE_MAX)
return -EINVAL;
hw_cwrite(CAP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC));
return 0;
}
/**
* hw_read_intr_enable: returns interrupt enable register
*
* This function returns register data
*/
static u32 hw_read_intr_enable(void)
{
return hw_cread(CAP_USBINTR, ~0);
}
/**
* hw_read_intr_status: returns interrupt status register
*
* This function returns register data
*/
static u32 hw_read_intr_status(void)
{
return hw_cread(CAP_USBSTS, ~0);
}
/**
* hw_register_read: reads all device registers (execute without interruption)
* @buf: destination buffer
* @size: buffer size
*
* This function returns number of registers read
*/
static size_t hw_register_read(u32 *buf, size_t size)
{
unsigned i;
if (size > hw_bank.size)
size = hw_bank.size;
for (i = 0; i < size; i++)
buf[i] = hw_aread(i * sizeof(u32), ~0);
return size;
}
/**
* hw_register_write: writes to register
* @addr: register address
* @data: register value
*
* This function returns an error code
*/
static int hw_register_write(u16 addr, u32 data)
{
/* align */
addr /= sizeof(u32);
if (addr >= hw_bank.size)
return -EINVAL;
/* align */
addr *= sizeof(u32);
hw_awrite(addr, ~0, data);
return 0;
}
/**
* hw_test_and_clear_complete: test & clear complete status (execute without
* interruption)
* @n: endpoint number
*
* This function returns complete status
*/
static int hw_test_and_clear_complete(int n)
{
n = ep_to_bit(n);
return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n));
}
/**
* hw_test_and_clear_intr_active: test & clear active interrupts (execute
* without interruption)
*
* This function returns active interrutps
*/
static u32 hw_test_and_clear_intr_active(void)
{
u32 reg = hw_read_intr_status() & hw_read_intr_enable();
hw_cwrite(CAP_USBSTS, ~0, reg);
return reg;
}
/**
* hw_test_and_clear_setup_guard: test & clear setup guard (execute without
* interruption)
*
* This function returns guard value
*/
static int hw_test_and_clear_setup_guard(void)
{
return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, 0);
}
/**
* hw_test_and_set_setup_guard: test & set setup guard (execute without
* interruption)
*
* This function returns guard value
*/
static int hw_test_and_set_setup_guard(void)
{
return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
}
/**
* hw_usb_set_address: configures USB address (execute without interruption)
* @value: new USB address
*
* This function returns an error code
*/
static int hw_usb_set_address(u8 value)
{
/* advance */
hw_cwrite(CAP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA,
value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA);
return 0;
}
/**
* hw_usb_reset: restart device after a bus reset (execute without
* interruption)
*
* This function returns an error code
*/
static int hw_usb_reset(void)
{
hw_usb_set_address(0);
/* ESS flushes only at end?!? */
hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0); /* flush all EPs */
/* clear setup token semaphores */
hw_cwrite(CAP_ENDPTSETUPSTAT, 0, 0); /* writes its content */
/* clear complete status */
hw_cwrite(CAP_ENDPTCOMPLETE, 0, 0); /* writes its content */
/* wait until all bits cleared */
while (hw_cread(CAP_ENDPTPRIME, ~0))
udelay(10); /* not RTOS friendly */
/* reset all endpoints ? */
/* reset internal status and wait for further instructions
no need to verify the port reset status (ESS does it) */
return 0;
}
/******************************************************************************
* DBG block
*****************************************************************************/
/**
* show_device: prints information about device capabilities and status
*
* Check "device.h" for details
*/
static ssize_t show_device(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
struct usb_gadget *gadget = &udc->gadget;
int n = 0;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
n += scnprintf(buf + n, PAGE_SIZE - n, "speed = %d\n",
gadget->speed);
n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed = %d\n",
gadget->max_speed);
/* TODO: Scheduled for removal in 3.8. */
n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed = %d\n",
gadget_is_dualspeed(gadget));
n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n",
gadget->is_otg);
n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n",
gadget->is_a_peripheral);
n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable = %d\n",
gadget->b_hnp_enable);
n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support = %d\n",
gadget->a_hnp_support);
n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n",
gadget->a_alt_hnp_support);
n += scnprintf(buf + n, PAGE_SIZE - n, "name = %s\n",
(gadget->name ? gadget->name : ""));
return n;
}
static DEVICE_ATTR(device, S_IRUSR, show_device, NULL);
/**
* show_driver: prints information about attached gadget (if any)
*
* Check "device.h" for details
*/
static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
struct usb_gadget_driver *driver = udc->driver;
int n = 0;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
if (driver == NULL)
return scnprintf(buf, PAGE_SIZE,
"There is no gadget attached!\n");
n += scnprintf(buf + n, PAGE_SIZE - n, "function = %s\n",
(driver->function ? driver->function : ""));
n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n",
driver->max_speed);
return n;
}
static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL);
/* Maximum event message length */
#define DBG_DATA_MSG 64UL
/* Maximum event messages */
#define DBG_DATA_MAX 128UL
/* Event buffer descriptor */
static struct {
char (buf[DBG_DATA_MAX])[DBG_DATA_MSG]; /* buffer */
unsigned idx; /* index */
unsigned tty; /* print to console? */
rwlock_t lck; /* lock */
} dbg_data = {
.idx = 0,
.tty = 0,
.lck = __RW_LOCK_UNLOCKED(lck)
};
/**
* dbg_dec: decrements debug event index
* @idx: buffer index
*/
static void dbg_dec(unsigned *idx)
{
*idx = (*idx - 1) & (DBG_DATA_MAX-1);
}
/**
* dbg_inc: increments debug event index
* @idx: buffer index
*/
static void dbg_inc(unsigned *idx)
{
*idx = (*idx + 1) & (DBG_DATA_MAX-1);
}
/**
* dbg_print: prints the common part of the event
* @addr: endpoint address
* @name: event name
* @status: status
* @extra: extra information
*/
static void dbg_print(u8 addr, const char *name, int status, const char *extra)
{
struct timeval tval;
unsigned int stamp;
unsigned long flags;
write_lock_irqsave(&dbg_data.lck, flags);
do_gettimeofday(&tval);
stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */
stamp = stamp * 1000000 + tval.tv_usec;
scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG,
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
"%04X\t? %02X %-7.7s %4i ?\t%s\n",
stamp, addr, name, status, extra);
dbg_inc(&dbg_data.idx);
write_unlock_irqrestore(&dbg_data.lck, flags);
if (dbg_data.tty != 0)
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n",
stamp, addr, name, status, extra);
}
/**
* dbg_done: prints a DONE event
* @addr: endpoint address
* @td: transfer descriptor
* @status: status
*/
static void dbg_done(u8 addr, const u32 token, int status)
{
char msg[DBG_DATA_MSG];
scnprintf(msg, sizeof(msg), "%d %02X",
(int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES),
(int)(token & TD_STATUS) >> ffs_nr(TD_STATUS));
dbg_print(addr, "DONE", status, msg);
}
/**
* dbg_event: prints a generic event
* @addr: endpoint address
* @name: event name
* @status: status
*/
static void dbg_event(u8 addr, const char *name, int status)
{
if (name != NULL)
dbg_print(addr, name, status, "");
}
/*
* dbg_queue: prints a QUEUE event
* @addr: endpoint address
* @req: USB request
* @status: status
*/
static void dbg_queue(u8 addr, const struct usb_request *req, int status)
{
char msg[DBG_DATA_MSG];
if (req != NULL) {
scnprintf(msg, sizeof(msg),
"%d %d", !req->no_interrupt, req->length);
dbg_print(addr, "QUEUE", status, msg);
}
}
/**
* dbg_setup: prints a SETUP event
* @addr: endpoint address
* @req: setup request
*/
static void dbg_setup(u8 addr, const struct usb_ctrlrequest *req)
{
char msg[DBG_DATA_MSG];
if (req != NULL) {
scnprintf(msg, sizeof(msg),
"%02X %02X %04X %04X %d", req->bRequestType,
req->bRequest, le16_to_cpu(req->wValue),
le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength));
dbg_print(addr, "SETUP", 0, msg);
}
}
/**
* show_events: displays the event buffer
*
* Check "device.h" for details
*/
static ssize_t show_events(struct device *dev, struct device_attribute *attr,
char *buf)
{
unsigned long flags;
unsigned i, j, n = 0;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
read_lock_irqsave(&dbg_data.lck, flags);
i = dbg_data.idx;
for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) {
n += strlen(dbg_data.buf[i]);
if (n >= PAGE_SIZE) {
n -= strlen(dbg_data.buf[i]);
break;
}
}
for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i))
j += scnprintf(buf + j, PAGE_SIZE - j,
"%s", dbg_data.buf[i]);
read_unlock_irqrestore(&dbg_data.lck, flags);
return n;
}
/**
* store_events: configure if events are going to be also printed to console
*
* Check "device.h" for details
*/
static ssize_t store_events(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned tty;
dbg_trace("[%s] %p, %d\n", __func__, buf, count);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
goto done;
}
if (sscanf(buf, "%u", &tty) != 1 || tty > 1) {
dev_err(dev, "<1|0>: enable|disable console log\n");
goto done;
}
dbg_data.tty = tty;
dev_info(dev, "tty = %u", dbg_data.tty);
done:
return count;
}
static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events);
/**
* show_inters: interrupt status, enable status and historic
*
* Check "device.h" for details
*/
static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
u32 intr;
unsigned i, j, n = 0;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
spin_lock_irqsave(udc->lock, flags);
n += scnprintf(buf + n, PAGE_SIZE - n,
"status = %08x\n", hw_read_intr_status());
n += scnprintf(buf + n, PAGE_SIZE - n,
"enable = %08x\n", hw_read_intr_enable());
n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
isr_statistics.test);
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
n += scnprintf(buf + n, PAGE_SIZE - n, "? ui = %d\n",
isr_statistics.ui);
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n",
isr_statistics.uei);
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n",
isr_statistics.pci);
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n",
isr_statistics.uri);
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n",
isr_statistics.sli);
n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n",
isr_statistics.none);
n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n",
isr_statistics.hndl.cnt);
for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) {
i &= ISR_MASK;
intr = isr_statistics.hndl.buf[i];
if (USBi_UI & intr)
n += scnprintf(buf + n, PAGE_SIZE - n, "ui ");
intr &= ~USBi_UI;
if (USBi_UEI & intr)
n += scnprintf(buf + n, PAGE_SIZE - n, "uei ");
intr &= ~USBi_UEI;
if (USBi_PCI & intr)
n += scnprintf(buf + n, PAGE_SIZE - n, "pci ");
intr &= ~USBi_PCI;
if (USBi_URI & intr)
n += scnprintf(buf + n, PAGE_SIZE - n, "uri ");
intr &= ~USBi_URI;
if (USBi_SLI & intr)
n += scnprintf(buf + n, PAGE_SIZE - n, "sli ");
intr &= ~USBi_SLI;
if (intr)
n += scnprintf(buf + n, PAGE_SIZE - n, "??? ");
if (isr_statistics.hndl.buf[i])
n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
}
spin_unlock_irqrestore(udc->lock, flags);
return n;
}
/**
* store_inters: enable & force or disable an individual interrutps
* (to be used for test purposes only)
*
* Check "device.h" for details
*/
static ssize_t store_inters(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
unsigned en, bit;
dbg_trace("[%s] %p, %d\n", __func__, buf, count);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
goto done;
}
if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) {
dev_err(dev, "<1|0> <bit>: enable|disable interrupt");
goto done;
}
spin_lock_irqsave(udc->lock, flags);
if (en) {
if (hw_intr_force(bit))
dev_err(dev, "invalid bit number\n");
else
isr_statistics.test++;
} else {
if (hw_intr_clear(bit))
dev_err(dev, "invalid bit number\n");
}
spin_unlock_irqrestore(udc->lock, flags);
done:
return count;
}
static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters);
/**
* show_port_test: reads port test mode
*
* Check "device.h" for details
*/
static ssize_t show_port_test(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
unsigned mode;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
spin_lock_irqsave(udc->lock, flags);
mode = hw_port_test_get();
spin_unlock_irqrestore(udc->lock, flags);
return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode);
}
/**
* store_port_test: writes port test mode
*
* Check "device.h" for details
*/
static ssize_t store_port_test(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
unsigned mode;
dbg_trace("[%s] %p, %d\n", __func__, buf, count);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
goto done;
}
if (sscanf(buf, "%u", &mode) != 1) {
dev_err(dev, "<mode>: set port test mode");
goto done;
}
spin_lock_irqsave(udc->lock, flags);
if (hw_port_test_set(mode))
dev_err(dev, "invalid mode\n");
spin_unlock_irqrestore(udc->lock, flags);
done:
return count;
}
static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR,
show_port_test, store_port_test);
/**
* show_qheads: DMA contents of all queue heads
*
* Check "device.h" for details
*/
static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
unsigned i, j, n = 0;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
spin_lock_irqsave(udc->lock, flags);
for (i = 0; i < hw_ep_max/2; i++) {
struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2];
n += scnprintf(buf + n, PAGE_SIZE - n,
"EP=%02i: RX=%08X TX=%08X\n",
i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) {
n += scnprintf(buf + n, PAGE_SIZE - n,
" %04X: %08X %08X\n", j,
*((u32 *)mEpRx->qh.ptr + j),
*((u32 *)mEpTx->qh.ptr + j));
}
}
spin_unlock_irqrestore(udc->lock, flags);
return n;
}
static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
/**
* show_registers: dumps all registers
*
* Check "device.h" for details
*/
#define DUMP_ENTRIES 512
static ssize_t show_registers(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
u32 *dump;
unsigned i, k, n = 0;
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
if (!dump) {
dev_err(dev, "%s: out of memory\n", __func__);
return 0;
}
spin_lock_irqsave(udc->lock, flags);
k = hw_register_read(dump, DUMP_ENTRIES);
spin_unlock_irqrestore(udc->lock, flags);
for (i = 0; i < k; i++) {
n += scnprintf(buf + n, PAGE_SIZE - n,
"reg[0x%04X] = 0x%08X\n",
i * (unsigned)sizeof(u32), dump[i]);
}
kfree(dump);
return n;
}
/**
* store_registers: writes value to register address
*
* Check "device.h" for details
*/
static ssize_t store_registers(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long addr, data, flags;
dbg_trace("[%s] %p, %d\n", __func__, buf, count);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
goto done;
}
if (sscanf(buf, "%li %li", &addr, &data) != 2) {
dev_err(dev, "<addr> <data>: write data to register address");
goto done;
}
spin_lock_irqsave(udc->lock, flags);
if (hw_register_write(addr, data))
dev_err(dev, "invalid address range\n");
spin_unlock_irqrestore(udc->lock, flags);
done:
return count;
}
static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR,
show_registers, store_registers);
/**
* show_requests: DMA contents of all requests currently queued (all endpts)
*
* Check "device.h" for details
*/
static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
unsigned long flags;
struct list_head *ptr = NULL;
struct ci13xxx_req *req = NULL;
unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
dev_err(dev, "[%s] EINVAL\n", __func__);
return 0;
}
spin_lock_irqsave(udc->lock, flags);
for (i = 0; i < hw_ep_max; i++)
list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
{
req = list_entry(ptr, struct ci13xxx_req, queue);
n += scnprintf(buf + n, PAGE_SIZE - n,
"EP=%02i: TD=%08X %s\n",
i % hw_ep_max/2, (u32)req->dma,
((i < hw_ep_max/2) ? "RX" : "TX"));
for (j = 0; j < qSize; j++)
n += scnprintf(buf + n, PAGE_SIZE - n,
" %04X: %08X\n", j,
*((u32 *)req->ptr + j));
}
spin_unlock_irqrestore(udc->lock, flags);
return n;
}
static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL);
/**
* dbg_create_files: initializes the attribute interface
* @dev: device
*
* This function returns an error code
*/
__maybe_unused static int dbg_create_files(struct device *dev)
{
int retval = 0;
if (dev == NULL)
return -EINVAL;
retval = device_create_file(dev, &dev_attr_device);
if (retval)
goto done;
retval = device_create_file(dev, &dev_attr_driver);
if (retval)
goto rm_device;
retval = device_create_file(dev, &dev_attr_events);
if (retval)
goto rm_driver;
retval = device_create_file(dev, &dev_attr_inters);
if (retval)
goto rm_events;
retval = device_create_file(dev, &dev_attr_port_test);
if (retval)
goto rm_inters;
retval = device_create_file(dev, &dev_attr_qheads);
if (retval)
goto rm_port_test;
retval = device_create_file(dev, &dev_attr_registers);
if (retval)
goto rm_qheads;
retval = device_create_file(dev, &dev_attr_requests);
if (retval)
goto rm_registers;
return 0;
rm_registers:
device_remove_file(dev, &dev_attr_registers);
rm_qheads:
device_remove_file(dev, &dev_attr_qheads);
rm_port_test:
device_remove_file(dev, &dev_attr_port_test);
rm_inters:
device_remove_file(dev, &dev_attr_inters);
rm_events:
device_remove_file(dev, &dev_attr_events);
rm_driver:
device_remove_file(dev, &dev_attr_driver);
rm_device:
device_remove_file(dev, &dev_attr_device);
done:
return retval;
}
/**
* dbg_remove_files: destroys the attribute interface
* @dev: device
*
* This function returns an error code
*/
__maybe_unused static int dbg_remove_files(struct device *dev)
{
if (dev == NULL)
return -EINVAL;
device_remove_file(dev, &dev_attr_requests);
device_remove_file(dev, &dev_attr_registers);
device_remove_file(dev, &dev_attr_qheads);
device_remove_file(dev, &dev_attr_port_test);
device_remove_file(dev, &dev_attr_inters);
device_remove_file(dev, &dev_attr_events);
device_remove_file(dev, &dev_attr_driver);
device_remove_file(dev, &dev_attr_device);
return 0;
}
/******************************************************************************
* UTIL block
*****************************************************************************/
/**
* _usb_addr: calculates endpoint address from direction & number
* @ep: endpoint
*/
static inline u8 _usb_addr(struct ci13xxx_ep *ep)
{
return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
}
/**
* _hardware_queue: configures a request at hardware level
* @gadget: gadget
* @mEp: endpoint
*
* This function returns an error code
*/
static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
{
unsigned i;
int ret = 0;
unsigned length = mReq->req.length;
trace("%p, %p", mEp, mReq);
/* don't queue twice */
if (mReq->req.status == -EALREADY)
return -EALREADY;
mReq->req.status = -EALREADY;
if (length && mReq->req.dma == DMA_ADDR_INVALID) {
mReq->req.dma = \
dma_map_single(mEp->device, mReq->req.buf,
length, mEp->dir ? DMA_TO_DEVICE :
DMA_FROM_DEVICE);
if (mReq->req.dma == 0)
return -ENOMEM;
mReq->map = 1;
}
if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) {
mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC,
&mReq->zdma);
if (mReq->zptr == NULL) {
if (mReq->map) {
dma_unmap_single(mEp->device, mReq->req.dma,
length, mEp->dir ? DMA_TO_DEVICE :
DMA_FROM_DEVICE);
mReq->req.dma = DMA_ADDR_INVALID;
mReq->map = 0;
}
return -ENOMEM;
}
memset(mReq->zptr, 0, sizeof(*mReq->zptr));
mReq->zptr->next = TD_TERMINATE;
mReq->zptr->token = TD_STATUS_ACTIVE;
if (!mReq->req.no_interrupt)
mReq->zptr->token |= TD_IOC;
}
/*
* TD configuration
* TODO - handle requests which spawns into several TDs
*/
memset(mReq->ptr, 0, sizeof(*mReq->ptr));
mReq->ptr->token = length << ffs_nr(TD_TOTAL_BYTES);
mReq->ptr->token &= TD_TOTAL_BYTES;
mReq->ptr->token |= TD_STATUS_ACTIVE;
if (mReq->zptr) {
mReq->ptr->next = mReq->zdma;
} else {
mReq->ptr->next = TD_TERMINATE;
if (!mReq->req.no_interrupt)
mReq->ptr->token |= TD_IOC;
}
mReq->ptr->page[0] = mReq->req.dma;
for (i = 1; i < 5; i++)
mReq->ptr->page[i] =
(mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK;
if (!list_empty(&mEp->qh.queue)) {
struct ci13xxx_req *mReqPrev;
int n = hw_ep_bit(mEp->num, mEp->dir);
int tmp_stat;
mReqPrev = list_entry(mEp->qh.queue.prev,
struct ci13xxx_req, queue);
if (mReqPrev->zptr)
mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK;
else
mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
wmb();
if (hw_cread(CAP_ENDPTPRIME, BIT(n)))
goto done;
do {
hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n));
} while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW));
hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0);
if (tmp_stat)
goto done;
}
/* QH configuration */
mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */
mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */
mEp->qh.ptr->cap |= QH_ZLT;
wmb(); /* synchronize before ep prime */
ret = hw_ep_prime(mEp->num, mEp->dir,
mEp->type == USB_ENDPOINT_XFER_CONTROL);
done:
return ret;
}
/**
* _hardware_dequeue: handles a request at hardware level
* @gadget: gadget
* @mEp: endpoint
*
* This function returns an error code
*/
static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
{
trace("%p, %p", mEp, mReq);
if (mReq->req.status != -EALREADY)
return -EINVAL;
if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0)
return -EBUSY;
if (mReq->zptr) {
if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0)
return -EBUSY;
dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
mReq->zptr = NULL;
}
mReq->req.status = 0;
if (mReq->map) {
dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
mReq->req.dma = DMA_ADDR_INVALID;
mReq->map = 0;
}
mReq->req.status = mReq->ptr->token & TD_STATUS;
if ((TD_STATUS_HALTED & mReq->req.status) != 0)
mReq->req.status = -1;
else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0)
mReq->req.status = -1;
else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0)
mReq->req.status = -1;
mReq->req.actual = mReq->ptr->token & TD_TOTAL_BYTES;
mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES);
mReq->req.actual = mReq->req.length - mReq->req.actual;
mReq->req.actual = mReq->req.status ? 0 : mReq->req.actual;
return mReq->req.actual;
}
/**
* _ep_nuke: dequeues all endpoint requests
* @mEp: endpoint
*
* This function returns an error code
* Caller must hold lock
*/
static int _ep_nuke(struct ci13xxx_ep *mEp)
__releases(mEp->lock)
__acquires(mEp->lock)
{
trace("%p", mEp);
if (mEp == NULL)
return -EINVAL;
hw_ep_flush(mEp->num, mEp->dir);
while (!list_empty(&mEp->qh.queue)) {
/* pop oldest request */
struct ci13xxx_req *mReq = \
list_entry(mEp->qh.queue.next,
struct ci13xxx_req, queue);
list_del_init(&mReq->queue);
mReq->req.status = -ESHUTDOWN;
if (mReq->req.complete != NULL) {
spin_unlock(mEp->lock);
mReq->req.complete(&mEp->ep, &mReq->req);
spin_lock(mEp->lock);
}
}
return 0;
}
/**
* _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
* @gadget: gadget
*
* This function returns an error code
*/
static int _gadget_stop_activity(struct usb_gadget *gadget)
{
struct usb_ep *ep;
struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
unsigned long flags;
trace("%p", gadget);
if (gadget == NULL)
return -EINVAL;
spin_lock_irqsave(udc->lock, flags);
udc->gadget.speed = USB_SPEED_UNKNOWN;
udc->remote_wakeup = 0;
udc->suspended = 0;
spin_unlock_irqrestore(udc->lock, flags);
/* flush all endpoints */
gadget_for_each_ep(ep, gadget) {
usb_ep_fifo_flush(ep);
}
usb_ep_fifo_flush(&udc->ep0out.ep);
usb_ep_fifo_flush(&udc->ep0in.ep);
udc->driver->disconnect(gadget);
/* make sure to disable all endpoints */
gadget_for_each_ep(ep, gadget) {
usb_ep_disable(ep);
}
if (udc->status != NULL) {
usb_ep_free_request(&udc->ep0in.ep, udc->status);
udc->status = NULL;
}
return 0;
}
/******************************************************************************
* ISR block
*****************************************************************************/
/**
* isr_reset_handler: USB reset interrupt handler
* @udc: UDC device
*
* This function resets USB engine after a bus reset occurred
*/
static void isr_reset_handler(struct ci13xxx *udc)
__releases(udc->lock)
__acquires(udc->lock)
{
int retval;
trace("%p", udc);
if (udc == NULL) {
err("EINVAL");
return;
}
dbg_event(0xFF, "BUS RST", 0);
spin_unlock(udc->lock);
retval = _gadget_stop_activity(&udc->gadget);
if (retval)
goto done;
retval = hw_usb_reset();
if (retval)
goto done;
udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC);
if (udc->status == NULL)
retval = -ENOMEM;
spin_lock(udc->lock);
done:
if (retval)
err("error: %i", retval);
}
/**
* isr_get_status_complete: get_status request complete function
* @ep: endpoint
* @req: request handled
*
* Caller must release lock
*/
static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
{
trace("%p, %p", ep, req);
if (ep == NULL || req == NULL) {
err("EINVAL");
return;
}
kfree(req->buf);
usb_ep_free_request(ep, req);
}
/**
* isr_get_status_response: get_status request response
* @udc: udc struct
* @setup: setup request packet
*
* This function returns an error code
*/
static int isr_get_status_response(struct ci13xxx *udc,
struct usb_ctrlrequest *setup)
__releases(mEp->lock)
__acquires(mEp->lock)
{
struct ci13xxx_ep *mEp = &udc->ep0in;
struct usb_request *req = NULL;
gfp_t gfp_flags = GFP_ATOMIC;
int dir, num, retval;
trace("%p, %p", mEp, setup);
if (mEp == NULL || setup == NULL)
return -EINVAL;
spin_unlock(mEp->lock);
req = usb_ep_alloc_request(&mEp->ep, gfp_flags);
spin_lock(mEp->lock);
if (req == NULL)
return -ENOMEM;
req->complete = isr_get_status_complete;
req->length = 2;
req->buf = kzalloc(req->length, gfp_flags);
if (req->buf == NULL) {
retval = -ENOMEM;
goto err_free_req;
}
if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
/* Assume that device is bus powered for now. */
*((u16 *)req->buf) = _udc->remote_wakeup << 1;
retval = 0;
} else if ((setup->bRequestType & USB_RECIP_MASK) \
== USB_RECIP_ENDPOINT) {
dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
TX : RX;
num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
*((u16 *)req->buf) = hw_ep_get_halt(num, dir);
}
/* else do nothing; reserved for future use */
spin_unlock(mEp->lock);
retval = usb_ep_queue(&mEp->ep, req, gfp_flags);
spin_lock(mEp->lock);
if (retval)
goto err_free_buf;
return 0;
err_free_buf:
kfree(req->buf);
err_free_req:
spin_unlock(mEp->lock);
usb_ep_free_request(&mEp->ep, req);
spin_lock(mEp->lock);
return retval;
}
/**
* isr_setup_status_complete: setup_status request complete function
* @ep: endpoint
* @req: request handled
*
* Caller must release lock. Put the port in test mode if test mode
* feature is selected.
*/
static void
isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
{
struct ci13xxx *udc = req->context;
unsigned long flags;
trace("%p, %p", ep, req);
spin_lock_irqsave(udc->lock, flags);
if (udc->test_mode)
hw_port_test_set(udc->test_mode);
spin_unlock_irqrestore(udc->lock, flags);
}
/**
* isr_setup_status_phase: queues the status phase of a setup transation
* @udc: udc struct
*
* This function returns an error code
*/
static int isr_setup_status_phase(struct ci13xxx *udc)
__releases(mEp->lock)
__acquires(mEp->lock)
{
int retval;
struct ci13xxx_ep *mEp;
trace("%p", udc);
mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in;
udc->status->context = udc;
udc->status->complete = isr_setup_status_complete;
spin_unlock(mEp->lock);
retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
spin_lock(mEp->lock);
return retval;
}
/**
* isr_tr_complete_low: transaction complete low level handler
* @mEp: endpoint
*
* This function returns an error code
* Caller must hold lock
*/
static int isr_tr_complete_low(struct ci13xxx_ep *mEp)
__releases(mEp->lock)
__acquires(mEp->lock)
{
struct ci13xxx_req *mReq, *mReqTemp;
struct ci13xxx_ep *mEpTemp = mEp;
int uninitialized_var(retval);
trace("%p", mEp);
if (list_empty(&mEp->qh.queue))
return -EINVAL;
list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
queue) {
retval = _hardware_dequeue(mEp, mReq);
if (retval < 0)
break;
list_del_init(&mReq->queue);
dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
if (mReq->req.complete != NULL) {
spin_unlock(mEp->lock);
if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
mReq->req.length)
mEpTemp = &_udc->ep0in;
mReq->req.complete(&mEpTemp->ep, &mReq->req);
spin_lock(mEp->lock);
}
}
if (retval == -EBUSY)
retval = 0;
if (retval < 0)
dbg_event(_usb_addr(mEp), "DONE", retval);
return retval;
}
/**
* isr_tr_complete_handler: transaction complete interrupt handler
* @udc: UDC descriptor
*
* This function handles traffic events
*/
static void isr_tr_complete_handler(struct ci13xxx *udc)
__releases(udc->lock)
__acquires(udc->lock)
{
unsigned i;
u8 tmode = 0;
trace("%p", udc);
if (udc == NULL) {
err("EINVAL");
return;
}
for (i = 0; i < hw_ep_max; i++) {
struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
int type, num, dir, err = -EINVAL;
struct usb_ctrlrequest req;
if (mEp->desc == NULL)
continue; /* not configured */
if (hw_test_and_clear_complete(i)) {
err = isr_tr_complete_low(mEp);
if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
if (err > 0) /* needs status phase */
err = isr_setup_status_phase(udc);
if (err < 0) {
dbg_event(_usb_addr(mEp),
"ERROR", err);
spin_unlock(udc->lock);
if (usb_ep_set_halt(&mEp->ep))
err("error: ep_set_halt");
spin_lock(udc->lock);
}
}
}
if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
!hw_test_and_clear_setup_status(i))
continue;
if (i != 0) {
warn("ctrl traffic received at endpoint");
continue;
}
/*
* Flush data and handshake transactions of previous
* setup packet.
*/
_ep_nuke(&udc->ep0out);
_ep_nuke(&udc->ep0in);
/* read_setup_packet */
do {
hw_test_and_set_setup_guard();
memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
} while (!hw_test_and_clear_setup_guard());
type = req.bRequestType;
udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
dbg_setup(_usb_addr(mEp), &req);
switch (req.bRequest) {
case USB_REQ_CLEAR_FEATURE:
if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
le16_to_cpu(req.wValue) ==
USB_ENDPOINT_HALT) {
if (req.wLength != 0)
break;
num = le16_to_cpu(req.wIndex);
dir = num & USB_ENDPOINT_DIR_MASK;
num &= USB_ENDPOINT_NUMBER_MASK;
if (dir) /* TX */
num += hw_ep_max/2;
if (!udc->ci13xxx_ep[num].wedge) {
spin_unlock(udc->lock);
err = usb_ep_clear_halt(
&udc->ci13xxx_ep[num].ep);
spin_lock(udc->lock);
if (err)
break;
}
err = isr_setup_status_phase(udc);
} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
le16_to_cpu(req.wValue) ==
USB_DEVICE_REMOTE_WAKEUP) {
if (req.wLength != 0)
break;
udc->remote_wakeup = 0;
err = isr_setup_status_phase(udc);
} else {
goto delegate;
}
break;
case USB_REQ_GET_STATUS:
if (type != (USB_DIR_IN|USB_RECIP_DEVICE) &&
type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
type != (USB_DIR_IN|USB_RECIP_INTERFACE))
goto delegate;
if (le16_to_cpu(req.wLength) != 2 ||
le16_to_cpu(req.wValue) != 0)
break;
err = isr_get_status_response(udc, &req);
break;
case USB_REQ_SET_ADDRESS:
if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
goto delegate;
if (le16_to_cpu(req.wLength) != 0 ||
le16_to_cpu(req.wIndex) != 0)
break;
err = hw_usb_set_address((u8)le16_to_cpu(req.wValue));
if (err)
break;
err = isr_setup_status_phase(udc);
break;
case USB_REQ_SET_FEATURE:
if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
le16_to_cpu(req.wValue) ==
USB_ENDPOINT_HALT) {
if (req.wLength != 0)
break;
num = le16_to_cpu(req.wIndex);
dir = num & USB_ENDPOINT_DIR_MASK;
num &= USB_ENDPOINT_NUMBER_MASK;
if (dir) /* TX */
num += hw_ep_max/2;
spin_unlock(udc->lock);
err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
spin_lock(udc->lock);
if (!err)
isr_setup_status_phase(udc);
} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
if (req.wLength != 0)
break;
switch (le16_to_cpu(req.wValue)) {
case USB_DEVICE_REMOTE_WAKEUP:
udc->remote_wakeup = 1;
err = isr_setup_status_phase(udc);
break;
case USB_DEVICE_TEST_MODE:
tmode = le16_to_cpu(req.wIndex) >> 8;
switch (tmode) {
case TEST_J:
case TEST_K:
case TEST_SE0_NAK:
case TEST_PACKET:
case TEST_FORCE_EN:
udc->test_mode = tmode;
err = isr_setup_status_phase(
udc);
break;
default:
break;
}
default:
goto delegate;
}
} else {
goto delegate;
}
break;
default:
delegate:
if (req.wLength == 0) /* no data phase */
udc->ep0_dir = TX;
spin_unlock(udc->lock);
err = udc->driver->setup(&udc->gadget, &req);
spin_lock(udc->lock);
break;
}
if (err < 0) {
dbg_event(_usb_addr(mEp), "ERROR", err);
spin_unlock(udc->lock);
if (usb_ep_set_halt(&mEp->ep))
err("error: ep_set_halt");
spin_lock(udc->lock);
}
}
}
/******************************************************************************
* ENDPT block
*****************************************************************************/
/**
* ep_enable: configure endpoint, making it usable
*
* Check usb_ep_enable() at "usb_gadget.h" for details
*/
static int ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
int retval = 0;
unsigned long flags;
trace("%p, %p", ep, desc);
if (ep == NULL || desc == NULL)
return -EINVAL;
spin_lock_irqsave(mEp->lock, flags);
/* only internal SW should enable ctrl endpts */
mEp->desc = desc;
if (!list_empty(&mEp->qh.queue))
warn("enabling a non-empty endpoint!");
mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX;
mEp->num = usb_endpoint_num(desc);
mEp->type = usb_endpoint_type(desc);
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 18:12:03 +08:00
mEp->ep.maxpacket = usb_endpoint_maxp(desc);
dbg_event(_usb_addr(mEp), "ENABLE", 0);
mEp->qh.ptr->cap = 0;
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->qh.ptr->cap |= QH_IOS;
else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
mEp->qh.ptr->cap &= ~QH_MULT;
else
mEp->qh.ptr->cap &= ~QH_ZLT;
mEp->qh.ptr->cap |=
(mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */
/*
* Enable endpoints in the HW other than ep0 as ep0
* is always enabled
*/
if (mEp->num)
retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
spin_unlock_irqrestore(mEp->lock, flags);
return retval;
}
/**
* ep_disable: endpoint is no longer usable
*
* Check usb_ep_disable() at "usb_gadget.h" for details
*/
static int ep_disable(struct usb_ep *ep)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
int direction, retval = 0;
unsigned long flags;
trace("%p", ep);
if (ep == NULL)
return -EINVAL;
else if (mEp->desc == NULL)
return -EBUSY;
spin_lock_irqsave(mEp->lock, flags);
/* only internal SW should disable ctrl endpts */
direction = mEp->dir;
do {
dbg_event(_usb_addr(mEp), "DISABLE", 0);
retval |= _ep_nuke(mEp);
retval |= hw_ep_disable(mEp->num, mEp->dir);
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->dir = (mEp->dir == TX) ? RX : TX;
} while (mEp->dir != direction);
mEp->desc = NULL;
spin_unlock_irqrestore(mEp->lock, flags);
return retval;
}
/**
* ep_alloc_request: allocate a request object to use with this endpoint
*
* Check usb_ep_alloc_request() at "usb_gadget.h" for details
*/
static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
struct ci13xxx_req *mReq = NULL;
trace("%p, %i", ep, gfp_flags);
if (ep == NULL) {
err("EINVAL");
return NULL;
}
mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
if (mReq != NULL) {
INIT_LIST_HEAD(&mReq->queue);
mReq->req.dma = DMA_ADDR_INVALID;
mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
&mReq->dma);
if (mReq->ptr == NULL) {
kfree(mReq);
mReq = NULL;
}
}
dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL);
return (mReq == NULL) ? NULL : &mReq->req;
}
/**
* ep_free_request: frees a request object
*
* Check usb_ep_free_request() at "usb_gadget.h" for details
*/
static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
unsigned long flags;
trace("%p, %p", ep, req);
if (ep == NULL || req == NULL) {
err("EINVAL");
return;
} else if (!list_empty(&mReq->queue)) {
err("EBUSY");
return;
}
spin_lock_irqsave(mEp->lock, flags);
if (mReq->ptr)
dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma);
kfree(mReq);
dbg_event(_usb_addr(mEp), "FREE", 0);
spin_unlock_irqrestore(mEp->lock, flags);
}
/**
* ep_queue: queues (submits) an I/O request to an endpoint
*
* Check usb_ep_queue()* at usb_gadget.h" for details
*/
static int ep_queue(struct usb_ep *ep, struct usb_request *req,
gfp_t __maybe_unused gfp_flags)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
int retval = 0;
unsigned long flags;
trace("%p, %p, %X", ep, req, gfp_flags);
if (ep == NULL || req == NULL || mEp->desc == NULL)
return -EINVAL;
spin_lock_irqsave(mEp->lock, flags);
if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
if (req->length)
mEp = (_udc->ep0_dir == RX) ?
&_udc->ep0out : &_udc->ep0in;
if (!list_empty(&mEp->qh.queue)) {
_ep_nuke(mEp);
retval = -EOVERFLOW;
warn("endpoint ctrl %X nuked", _usb_addr(mEp));
}
}
/* first nuke then test link, e.g. previous status has not sent */
if (!list_empty(&mReq->queue)) {
retval = -EBUSY;
err("request already in queue");
goto done;
}
if (req->length > (4 * CI13XXX_PAGE_SIZE)) {
req->length = (4 * CI13XXX_PAGE_SIZE);
retval = -EMSGSIZE;
warn("request length truncated");
}
dbg_queue(_usb_addr(mEp), req, retval);
/* push request */
mReq->req.status = -EINPROGRESS;
mReq->req.actual = 0;
retval = _hardware_enqueue(mEp, mReq);
if (retval == -EALREADY) {
dbg_event(_usb_addr(mEp), "QUEUE", retval);
retval = 0;
}
if (!retval)
list_add_tail(&mReq->queue, &mEp->qh.queue);
done:
spin_unlock_irqrestore(mEp->lock, flags);
return retval;
}
/**
* ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
*
* Check usb_ep_dequeue() at "usb_gadget.h" for details
*/
static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
unsigned long flags;
trace("%p, %p", ep, req);
if (ep == NULL || req == NULL || mReq->req.status != -EALREADY ||
mEp->desc == NULL || list_empty(&mReq->queue) ||
list_empty(&mEp->qh.queue))
return -EINVAL;
spin_lock_irqsave(mEp->lock, flags);
dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
hw_ep_flush(mEp->num, mEp->dir);
/* pop request */
list_del_init(&mReq->queue);
if (mReq->map) {
dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
mReq->req.dma = DMA_ADDR_INVALID;
mReq->map = 0;
}
req->status = -ECONNRESET;
if (mReq->req.complete != NULL) {
spin_unlock(mEp->lock);
mReq->req.complete(&mEp->ep, &mReq->req);
spin_lock(mEp->lock);
}
spin_unlock_irqrestore(mEp->lock, flags);
return 0;
}
/**
* ep_set_halt: sets the endpoint halt feature
*
* Check usb_ep_set_halt() at "usb_gadget.h" for details
*/
static int ep_set_halt(struct usb_ep *ep, int value)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
int direction, retval = 0;
unsigned long flags;
trace("%p, %i", ep, value);
if (ep == NULL || mEp->desc == NULL)
return -EINVAL;
spin_lock_irqsave(mEp->lock, flags);
#ifndef STALL_IN
/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
!list_empty(&mEp->qh.queue)) {
spin_unlock_irqrestore(mEp->lock, flags);
return -EAGAIN;
}
#endif
direction = mEp->dir;
do {
dbg_event(_usb_addr(mEp), "HALT", value);
retval |= hw_ep_set_halt(mEp->num, mEp->dir, value);
if (!value)
mEp->wedge = 0;
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->dir = (mEp->dir == TX) ? RX : TX;
} while (mEp->dir != direction);
spin_unlock_irqrestore(mEp->lock, flags);
return retval;
}
/**
* ep_set_wedge: sets the halt feature and ignores clear requests
*
* Check usb_ep_set_wedge() at "usb_gadget.h" for details
*/
static int ep_set_wedge(struct usb_ep *ep)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
unsigned long flags;
trace("%p", ep);
if (ep == NULL || mEp->desc == NULL)
return -EINVAL;
spin_lock_irqsave(mEp->lock, flags);
dbg_event(_usb_addr(mEp), "WEDGE", 0);
mEp->wedge = 1;
spin_unlock_irqrestore(mEp->lock, flags);
return usb_ep_set_halt(ep);
}
/**
* ep_fifo_flush: flushes contents of a fifo
*
* Check usb_ep_fifo_flush() at "usb_gadget.h" for details
*/
static void ep_fifo_flush(struct usb_ep *ep)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
unsigned long flags;
trace("%p", ep);
if (ep == NULL) {
err("%02X: -EINVAL", _usb_addr(mEp));
return;
}
spin_lock_irqsave(mEp->lock, flags);
dbg_event(_usb_addr(mEp), "FFLUSH", 0);
hw_ep_flush(mEp->num, mEp->dir);
spin_unlock_irqrestore(mEp->lock, flags);
}
/**
* Endpoint-specific part of the API to the USB controller hardware
* Check "usb_gadget.h" for details
*/
static const struct usb_ep_ops usb_ep_ops = {
.enable = ep_enable,
.disable = ep_disable,
.alloc_request = ep_alloc_request,
.free_request = ep_free_request,
.queue = ep_queue,
.dequeue = ep_dequeue,
.set_halt = ep_set_halt,
.set_wedge = ep_set_wedge,
.fifo_flush = ep_fifo_flush,
};
/******************************************************************************
* GADGET block
*****************************************************************************/
static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
{
struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
unsigned long flags;
int gadget_ready = 0;
if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
return -EOPNOTSUPP;
spin_lock_irqsave(udc->lock, flags);
udc->vbus_active = is_active;
if (udc->driver)
gadget_ready = 1;
spin_unlock_irqrestore(udc->lock, flags);
if (gadget_ready) {
if (is_active) {
pm_runtime_get_sync(&_gadget->dev);
hw_device_reset(udc);
hw_device_state(udc->ep0out.qh.dma);
} else {
hw_device_state(0);
if (udc->udc_driver->notify_event)
udc->udc_driver->notify_event(udc,
CI13XXX_CONTROLLER_STOPPED_EVENT);
_gadget_stop_activity(&udc->gadget);
pm_runtime_put_sync(&_gadget->dev);
}
}
return 0;
}
static int ci13xxx_wakeup(struct usb_gadget *_gadget)
{
struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
unsigned long flags;
int ret = 0;
trace();
spin_lock_irqsave(udc->lock, flags);
if (!udc->remote_wakeup) {
ret = -EOPNOTSUPP;
trace("remote wakeup feature is not enabled\n");
goto out;
}
if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) {
ret = -EINVAL;
trace("port is not suspended\n");
goto out;
}
hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR);
out:
spin_unlock_irqrestore(udc->lock, flags);
return ret;
}
static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
{
struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
if (udc->transceiver)
return otg_set_power(udc->transceiver, mA);
return -ENOTSUPP;
}
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
static int ci13xxx_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *));
static int ci13xxx_stop(struct usb_gadget_driver *driver);
/**
* Device operations part of the API to the USB controller hardware,
* which don't involve endpoints (or i/o)
* Check "usb_gadget.h" for details
*/
static const struct usb_gadget_ops usb_gadget_ops = {
.vbus_session = ci13xxx_vbus_session,
.wakeup = ci13xxx_wakeup,
.vbus_draw = ci13xxx_vbus_draw,
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
.start = ci13xxx_start,
.stop = ci13xxx_stop,
};
/**
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
* ci13xxx_start: register a gadget driver
* @driver: the driver being registered
* @bind: the driver's bind callback
*
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
* Check ci13xxx_start() at <linux/usb/gadget.h> for details.
* Interrupts are enabled here.
*/
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
static int ci13xxx_start(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *))
{
struct ci13xxx *udc = _udc;
unsigned long flags;
int i, j;
int retval = -ENOMEM;
trace("%p", driver);
if (driver == NULL ||
bind == NULL ||
driver->setup == NULL ||
driver->disconnect == NULL)
return -EINVAL;
else if (udc == NULL)
return -ENODEV;
else if (udc->driver != NULL)
return -EBUSY;
/* alloc resources */
udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev,
sizeof(struct ci13xxx_qh),
64, CI13XXX_PAGE_SIZE);
if (udc->qh_pool == NULL)
return -ENOMEM;
udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev,
sizeof(struct ci13xxx_td),
64, CI13XXX_PAGE_SIZE);
if (udc->td_pool == NULL) {
dma_pool_destroy(udc->qh_pool);
udc->qh_pool = NULL;
return -ENOMEM;
}
spin_lock_irqsave(udc->lock, flags);
info("hw_ep_max = %d", hw_ep_max);
udc->gadget.dev.driver = NULL;
retval = 0;
for (i = 0; i < hw_ep_max/2; i++) {
for (j = RX; j <= TX; j++) {
int k = i + j * hw_ep_max/2;
struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
(j == TX) ? "in" : "out");
mEp->lock = udc->lock;
mEp->device = &udc->gadget.dev;
mEp->td_pool = udc->td_pool;
mEp->ep.name = mEp->name;
mEp->ep.ops = &usb_ep_ops;
mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
INIT_LIST_HEAD(&mEp->qh.queue);
spin_unlock_irqrestore(udc->lock, flags);
mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
&mEp->qh.dma);
spin_lock_irqsave(udc->lock, flags);
if (mEp->qh.ptr == NULL)
retval = -ENOMEM;
else
memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
/* skip ep0 out and in endpoints */
if (i == 0)
continue;
list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
}
}
if (retval)
goto done;
spin_unlock_irqrestore(udc->lock, flags);
udc->ep0out.ep.desc = &ctrl_endpt_out_desc;
retval = usb_ep_enable(&udc->ep0out.ep);
if (retval)
return retval;
udc->ep0in.ep.desc = &ctrl_endpt_in_desc;
retval = usb_ep_enable(&udc->ep0in.ep);
if (retval)
return retval;
spin_lock_irqsave(udc->lock, flags);
udc->gadget.ep0 = &udc->ep0in.ep;
/* bind gadget */
driver->driver.bus = NULL;
udc->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(udc->lock, flags);
retval = bind(&udc->gadget); /* MAY SLEEP */
spin_lock_irqsave(udc->lock, flags);
if (retval) {
udc->gadget.dev.driver = NULL;
goto done;
}
udc->driver = driver;
pm_runtime_get_sync(&udc->gadget.dev);
if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
if (udc->vbus_active) {
if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
hw_device_reset(udc);
} else {
pm_runtime_put_sync(&udc->gadget.dev);
goto done;
}
}
retval = hw_device_state(udc->ep0out.qh.dma);
if (retval)
pm_runtime_put_sync(&udc->gadget.dev);
done:
spin_unlock_irqrestore(udc->lock, flags);
return retval;
}
/**
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
* ci13xxx_stop: unregister a gadget driver
*
* Check usb_gadget_unregister_driver() at "usb_gadget.h" for details
*/
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
static int ci13xxx_stop(struct usb_gadget_driver *driver)
{
struct ci13xxx *udc = _udc;
unsigned long i, flags;
trace("%p", driver);
if (driver == NULL ||
driver->unbind == NULL ||
driver->setup == NULL ||
driver->disconnect == NULL ||
driver != udc->driver)
return -EINVAL;
spin_lock_irqsave(udc->lock, flags);
if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
udc->vbus_active) {
hw_device_state(0);
if (udc->udc_driver->notify_event)
udc->udc_driver->notify_event(udc,
CI13XXX_CONTROLLER_STOPPED_EVENT);
USB: ci13xxx_udc: fix deadlock during rmmod The inline documentation of _gadget_stop_activity() states that the function should be called holding the udc->lock. This however will result in a deadlock, because _gadget_stop_activity() takes the udc->lock. During normal operation _gadget_stop_activity() is always called unlocked, but in ci13xxx_stop() it's called locked, this results in the following deadlock during rmmod of a gadget driver. This patch fixes the deadlock by calling _gadget_stop_activity() always unlocked, the inline documentation is adjusted accordingly. ============================================= [ INFO: possible recursive locking detected ] 3.1.0-rc6+ #159 --------------------------------------------- rmmod/121 is trying to acquire lock: (udc_lock){-.-...}, at: [<c0229048>] _gadget_stop_activity+0x18/0x154 but task is already holding lock: (udc_lock){-.-...}, at: [<c02291e0>] ci13xxx_stop+0x5c/0x164 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(udc_lock); lock(udc_lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by rmmod/121: #0: (udc_lock#2){+.+.+.}, at: [<c02286c0>] usb_gadget_unregister_driver+0x34/0x88 #1: (udc_lock){-.-...}, at: [<c02291e0>] ci13xxx_stop+0x5c/0x164 stack backtrace: [<c000d41c>] (unwind_backtrace+0x0/0xf0) from [<c0056f94>] (check_deadlock.clone.24+0x284/0x2c4) [<c0056f94>] (check_deadlock.clone.24+0x284/0x2c4) from [<c00589ac>] (validate_chain.clone.25+0x430/0x6fc) [<c00589ac>] (validate_chain.clone.25+0x430/0x6fc) from [<c0059bac>] (__lock_acquire+0x494/0x8f0) [<c0059bac>] (__lock_acquire+0x494/0x8f0) from [<c005a698>] (lock_acquire+0x98/0x1a8) [<c005a698>] (lock_acquire+0x98/0x1a8) from [<c02f12a4>] (_raw_spin_lock_irqsave+0x64/0xa0) [<c02f12a4>] (_raw_spin_lock_irqsave+0x64/0xa0) from [<c0229048>] (_gadget_stop_activity+0x18/0x154) [<c0229048>] (_gadget_stop_activity+0x18/0x154) from [<c0229234>] (ci13xxx_stop+0xb0/0x164) [<c0229234>] (ci13xxx_stop+0xb0/0x164) from [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) from [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) from [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) from [<c00092a0>] (ret_fast_syscall+0x0/0x38) BUG: spinlock lockup on CPU#0, rmmod/121, c05b1644 [<c000d41c>] (unwind_backtrace+0x0/0xf0) from [<c01da000>] (do_raw_spin_lock+0x128/0x144) [<c01da000>] (do_raw_spin_lock+0x128/0x144) from [<c02f12c8>] (_raw_spin_lock_irqsave+0x88/0xa0) [<c02f12c8>] (_raw_spin_lock_irqsave+0x88/0xa0) from [<c0229048>] (_gadget_stop_activity+0x18/0x154) [<c0229048>] (_gadget_stop_activity+0x18/0x154) from [<c0229234>] (ci13xxx_stop+0xb0/0x164) [<c0229234>] (ci13xxx_stop+0xb0/0x164) from [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) from [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) from [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) from [<c00092a0>] (ret_fast_syscall+0x0/0x38) Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-11 00:38:07 +08:00
spin_unlock_irqrestore(udc->lock, flags);
_gadget_stop_activity(&udc->gadget);
USB: ci13xxx_udc: fix deadlock during rmmod The inline documentation of _gadget_stop_activity() states that the function should be called holding the udc->lock. This however will result in a deadlock, because _gadget_stop_activity() takes the udc->lock. During normal operation _gadget_stop_activity() is always called unlocked, but in ci13xxx_stop() it's called locked, this results in the following deadlock during rmmod of a gadget driver. This patch fixes the deadlock by calling _gadget_stop_activity() always unlocked, the inline documentation is adjusted accordingly. ============================================= [ INFO: possible recursive locking detected ] 3.1.0-rc6+ #159 --------------------------------------------- rmmod/121 is trying to acquire lock: (udc_lock){-.-...}, at: [<c0229048>] _gadget_stop_activity+0x18/0x154 but task is already holding lock: (udc_lock){-.-...}, at: [<c02291e0>] ci13xxx_stop+0x5c/0x164 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(udc_lock); lock(udc_lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by rmmod/121: #0: (udc_lock#2){+.+.+.}, at: [<c02286c0>] usb_gadget_unregister_driver+0x34/0x88 #1: (udc_lock){-.-...}, at: [<c02291e0>] ci13xxx_stop+0x5c/0x164 stack backtrace: [<c000d41c>] (unwind_backtrace+0x0/0xf0) from [<c0056f94>] (check_deadlock.clone.24+0x284/0x2c4) [<c0056f94>] (check_deadlock.clone.24+0x284/0x2c4) from [<c00589ac>] (validate_chain.clone.25+0x430/0x6fc) [<c00589ac>] (validate_chain.clone.25+0x430/0x6fc) from [<c0059bac>] (__lock_acquire+0x494/0x8f0) [<c0059bac>] (__lock_acquire+0x494/0x8f0) from [<c005a698>] (lock_acquire+0x98/0x1a8) [<c005a698>] (lock_acquire+0x98/0x1a8) from [<c02f12a4>] (_raw_spin_lock_irqsave+0x64/0xa0) [<c02f12a4>] (_raw_spin_lock_irqsave+0x64/0xa0) from [<c0229048>] (_gadget_stop_activity+0x18/0x154) [<c0229048>] (_gadget_stop_activity+0x18/0x154) from [<c0229234>] (ci13xxx_stop+0xb0/0x164) [<c0229234>] (ci13xxx_stop+0xb0/0x164) from [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) from [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) from [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) from [<c00092a0>] (ret_fast_syscall+0x0/0x38) BUG: spinlock lockup on CPU#0, rmmod/121, c05b1644 [<c000d41c>] (unwind_backtrace+0x0/0xf0) from [<c01da000>] (do_raw_spin_lock+0x128/0x144) [<c01da000>] (do_raw_spin_lock+0x128/0x144) from [<c02f12c8>] (_raw_spin_lock_irqsave+0x88/0xa0) [<c02f12c8>] (_raw_spin_lock_irqsave+0x88/0xa0) from [<c0229048>] (_gadget_stop_activity+0x18/0x154) [<c0229048>] (_gadget_stop_activity+0x18/0x154) from [<c0229234>] (ci13xxx_stop+0xb0/0x164) [<c0229234>] (ci13xxx_stop+0xb0/0x164) from [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) [<c022867c>] (usb_gadget_remove_driver+0x88/0x98) from [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) [<c02286f4>] (usb_gadget_unregister_driver+0x68/0x88) from [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) [<c0065f2c>] (sys_delete_module+0x1fc/0x26c) from [<c00092a0>] (ret_fast_syscall+0x0/0x38) Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-11 00:38:07 +08:00
spin_lock_irqsave(udc->lock, flags);
pm_runtime_put(&udc->gadget.dev);
}
/* unbind gadget */
spin_unlock_irqrestore(udc->lock, flags);
driver->unbind(&udc->gadget); /* MAY SLEEP */
spin_lock_irqsave(udc->lock, flags);
udc->gadget.dev.driver = NULL;
/* free resources */
for (i = 0; i < hw_ep_max; i++) {
struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
if (!list_empty(&mEp->ep.ep_list))
list_del_init(&mEp->ep.ep_list);
if (mEp->qh.ptr != NULL)
dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
}
udc->gadget.ep0 = NULL;
udc->driver = NULL;
spin_unlock_irqrestore(udc->lock, flags);
if (udc->td_pool != NULL) {
dma_pool_destroy(udc->td_pool);
udc->td_pool = NULL;
}
if (udc->qh_pool != NULL) {
dma_pool_destroy(udc->qh_pool);
udc->qh_pool = NULL;
}
return 0;
}
/******************************************************************************
* BUS block
*****************************************************************************/
/**
* udc_irq: global interrupt handler
*
* This function returns IRQ_HANDLED if the IRQ has been handled
* It locks access to registers
*/
static irqreturn_t udc_irq(void)
{
struct ci13xxx *udc = _udc;
irqreturn_t retval;
u32 intr;
trace();
if (udc == NULL) {
err("ENODEV");
return IRQ_HANDLED;
}
spin_lock(udc->lock);
if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
if (hw_cread(CAP_USBMODE, USBMODE_CM) !=
USBMODE_CM_DEVICE) {
spin_unlock(udc->lock);
return IRQ_NONE;
}
}
intr = hw_test_and_clear_intr_active();
if (intr) {
isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr;
isr_statistics.hndl.idx &= ISR_MASK;
isr_statistics.hndl.cnt++;
/* order defines priority - do NOT change it */
if (USBi_URI & intr) {
isr_statistics.uri++;
isr_reset_handler(udc);
}
if (USBi_PCI & intr) {
isr_statistics.pci++;
udc->gadget.speed = hw_port_is_high_speed() ?
USB_SPEED_HIGH : USB_SPEED_FULL;
if (udc->suspended && udc->driver->resume) {
spin_unlock(udc->lock);
udc->driver->resume(&udc->gadget);
spin_lock(udc->lock);
udc->suspended = 0;
}
}
if (USBi_UEI & intr)
isr_statistics.uei++;
if (USBi_UI & intr) {
isr_statistics.ui++;
isr_tr_complete_handler(udc);
}
if (USBi_SLI & intr) {
if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
udc->driver->suspend) {
udc->suspended = 1;
spin_unlock(udc->lock);
udc->driver->suspend(&udc->gadget);
spin_lock(udc->lock);
}
isr_statistics.sli++;
}
retval = IRQ_HANDLED;
} else {
isr_statistics.none++;
retval = IRQ_NONE;
}
spin_unlock(udc->lock);
return retval;
}
/**
* udc_release: driver release function
* @dev: device
*
* Currently does nothing
*/
static void udc_release(struct device *dev)
{
trace("%p", dev);
if (dev == NULL)
err("EINVAL");
}
/**
* udc_probe: parent probe must call this to initialize UDC
* @dev: parent device
* @regs: registers base address
* @name: driver name
*
* This function returns an error code
* No interrupts active, the IRQ has not been requested yet
* Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
*/
static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
void __iomem *regs)
{
struct ci13xxx *udc;
int retval = 0;
trace("%p, %p, %p", dev, regs, driver->name);
if (dev == NULL || regs == NULL || driver == NULL ||
driver->name == NULL)
return -EINVAL;
udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL);
if (udc == NULL)
return -ENOMEM;
udc->lock = &udc_lock;
udc->regs = regs;
udc->udc_driver = driver;
udc->gadget.ops = &usb_gadget_ops;
udc->gadget.speed = USB_SPEED_UNKNOWN;
udc->gadget.max_speed = USB_SPEED_HIGH;
udc->gadget.is_otg = 0;
udc->gadget.name = driver->name;
INIT_LIST_HEAD(&udc->gadget.ep_list);
udc->gadget.ep0 = NULL;
dev_set_name(&udc->gadget.dev, "gadget");
udc->gadget.dev.dma_mask = dev->dma_mask;
udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
udc->gadget.dev.parent = dev;
udc->gadget.dev.release = udc_release;
retval = hw_device_init(regs);
if (retval < 0)
goto free_udc;
udc->transceiver = otg_get_transceiver();
if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
if (udc->transceiver == NULL) {
retval = -ENODEV;
goto free_udc;
}
}
if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
retval = hw_device_reset(udc);
if (retval)
goto put_transceiver;
}
retval = device_register(&udc->gadget.dev);
if (retval) {
put_device(&udc->gadget.dev);
goto put_transceiver;
}
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
retval = dbg_create_files(&udc->gadget.dev);
#endif
if (retval)
goto unreg_device;
if (udc->transceiver) {
retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
if (retval)
goto remove_dbg;
}
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
retval = usb_add_gadget_udc(dev, &udc->gadget);
if (retval)
goto remove_trans;
pm_runtime_no_callbacks(&udc->gadget.dev);
pm_runtime_enable(&udc->gadget.dev);
_udc = udc;
return retval;
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
remove_trans:
if (udc->transceiver) {
otg_set_peripheral(udc->transceiver, &udc->gadget);
otg_put_transceiver(udc->transceiver);
}
err("error = %i", retval);
remove_dbg:
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
dbg_remove_files(&udc->gadget.dev);
#endif
unreg_device:
device_unregister(&udc->gadget.dev);
put_transceiver:
if (udc->transceiver)
otg_put_transceiver(udc->transceiver);
free_udc:
kfree(udc);
_udc = NULL;
return retval;
}
/**
* udc_remove: parent remove must call this to remove UDC
*
* No interrupts active, the IRQ has been released
*/
static void udc_remove(void)
{
struct ci13xxx *udc = _udc;
if (udc == NULL) {
err("EINVAL");
return;
}
usb: gadget: convert all users to the new udc infrastructure peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 21:33:47 +08:00
usb_del_gadget_udc(&udc->gadget);
if (udc->transceiver) {
otg_set_peripheral(udc->transceiver, &udc->gadget);
otg_put_transceiver(udc->transceiver);
}
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
dbg_remove_files(&udc->gadget.dev);
#endif
device_unregister(&udc->gadget.dev);
kfree(udc);
_udc = NULL;
}