License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2012-08-13 13:49:39 +08:00
|
|
|
#ifndef __PACKET_INTERNAL_H__
|
|
|
|
#define __PACKET_INTERNAL_H__
|
|
|
|
|
2017-06-30 18:08:10 +08:00
|
|
|
#include <linux/refcount.h>
|
|
|
|
|
2012-08-13 13:49:39 +08:00
|
|
|
struct packet_mclist {
|
|
|
|
struct packet_mclist *next;
|
|
|
|
int ifindex;
|
|
|
|
int count;
|
|
|
|
unsigned short type;
|
|
|
|
unsigned short alen;
|
|
|
|
unsigned char addr[MAX_ADDR_LEN];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* kbdq - kernel block descriptor queue */
|
|
|
|
struct tpacket_kbdq_core {
|
|
|
|
struct pgv *pkbdq;
|
|
|
|
unsigned int feature_req_word;
|
|
|
|
unsigned int hdrlen;
|
|
|
|
unsigned char reset_pending_on_curr_blk;
|
|
|
|
unsigned char delete_blk_timer;
|
|
|
|
unsigned short kactive_blk_num;
|
|
|
|
unsigned short blk_sizeof_priv;
|
|
|
|
|
|
|
|
/* last_kactive_blk_num:
|
|
|
|
* trick to see if user-space has caught up
|
|
|
|
* in order to avoid refreshing timer when every single pkt arrives.
|
|
|
|
*/
|
|
|
|
unsigned short last_kactive_blk_num;
|
|
|
|
|
|
|
|
char *pkblk_start;
|
|
|
|
char *pkblk_end;
|
|
|
|
int kblk_size;
|
2014-08-16 00:16:04 +08:00
|
|
|
unsigned int max_frame_len;
|
2012-08-13 13:49:39 +08:00
|
|
|
unsigned int knum_blocks;
|
|
|
|
uint64_t knxt_seq_num;
|
|
|
|
char *prev;
|
|
|
|
char *nxt_offset;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
2020-07-07 23:22:04 +08:00
|
|
|
rwlock_t blk_fill_in_prog_lock;
|
2012-08-13 13:49:39 +08:00
|
|
|
|
|
|
|
/* Default is set to 8ms */
|
|
|
|
#define DEFAULT_PRB_RETIRE_TOV (8)
|
|
|
|
|
|
|
|
unsigned short retire_blk_tov;
|
|
|
|
unsigned short version;
|
|
|
|
unsigned long tov_in_jiffies;
|
|
|
|
|
|
|
|
/* timer to retire an outstanding block */
|
|
|
|
struct timer_list retire_blk_timer;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct pgv {
|
|
|
|
char *buffer;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct packet_ring_buffer {
|
|
|
|
struct pgv *pg_vec;
|
2013-04-19 14:12:28 +08:00
|
|
|
|
2012-08-13 13:49:39 +08:00
|
|
|
unsigned int head;
|
|
|
|
unsigned int frames_per_block;
|
|
|
|
unsigned int frame_size;
|
|
|
|
unsigned int frame_max;
|
|
|
|
|
2018-08-30 02:50:12 +08:00
|
|
|
unsigned int pg_vec_order;
|
2012-08-13 13:49:39 +08:00
|
|
|
unsigned int pg_vec_pages;
|
|
|
|
unsigned int pg_vec_len;
|
|
|
|
|
packet: use percpu mmap tx frame pending refcount
In PF_PACKET's packet mmap(), we can avoid using one atomic_inc()
and one atomic_dec() call in skb destructor and use a percpu
reference count instead in order to determine if packets are
still pending to be sent out. Micro-benchmark with [1] that has
been slightly modified (that is, protcol = 0 in socket(2) and
bind(2)), example on a rather crappy testing machine; I expect
it to scale and have even better results on bigger machines:
./packet_mm_tx -s7000 -m7200 -z700000 em1, avg over 2500 runs:
With patch: 4,022,015 cyc
Without patch: 4,812,994 cyc
time ./packet_mm_tx -s64 -c10000000 em1 > /dev/null, stable:
With patch:
real 1m32.241s
user 0m0.287s
sys 1m29.316s
Without patch:
real 1m38.386s
user 0m0.265s
sys 1m35.572s
In function tpacket_snd(), it is okay to use packet_read_pending()
since in fast-path we short-circuit the condition already with
ph != NULL, since we have next frames to process. In case we have
MSG_DONTWAIT, we also do not execute this path as need_wait is
false here anyway, and in case of _no_ MSG_DONTWAIT flag, it is
okay to call a packet_read_pending(), because when we ever reach
that path, we're done processing outgoing frames anyway and only
look if there are skbs still outstanding to be orphaned. We can
stay lockless in this percpu counter since it's acceptable when we
reach this path for the sum to be imprecise first, but we'll level
out at 0 after all pending frames have reached the skb destructor
eventually through tx reclaim. When people pin a tx process to
particular CPUs, we expect overflows to happen in the reference
counter as on one CPU we expect heavy increase; and distributed
through ksoftirqd on all CPUs a decrease, for example. As
David Laight points out, since the C language doesn't define the
result of signed int overflow (i.e. rather than wrap, it is
allowed to saturate as a possible outcome), we have to use
unsigned int as reference count. The sum over all CPUs when tx
is complete will result in 0 again.
The BUG_ON() in tpacket_destruct_skb() we can remove as well. It
can _only_ be set from inside tpacket_snd() path and we made sure
to increase tx_ring.pending in any case before we called po->xmit(skb).
So testing for tx_ring.pending == 0 is not too useful. Instead, it
would rather have been useful to test if lower layers didn't orphan
the skb so that we're missing ring slots being put back to
TP_STATUS_AVAILABLE. But such a bug will be caught in user space
already as we end up realizing that we do not have any
TP_STATUS_AVAILABLE slots left anymore. Therefore, we're all set.
Btw, in case of RX_RING path, we do not make use of the pending
member, therefore we also don't need to use up any percpu memory
here. Also note that __alloc_percpu() already returns a zero-filled
percpu area, so initialization is done already.
[1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 23:25:36 +08:00
|
|
|
unsigned int __percpu *pending_refcnt;
|
2013-04-19 14:12:28 +08:00
|
|
|
|
net/packet: tpacket_rcv: avoid a producer race condition
PACKET_RX_RING can cause multiple writers to access the same slot if a
fast writer wraps the ring while a slow writer is still copying. This
is particularly likely with few, large, slots (e.g., GSO packets).
Synchronize kernel thread ownership of rx ring slots with a bitmap.
Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL
while holding the sk receive queue lock. They release this lock before
copying and set tp_status to TP_STATUS_USER to release to userspace
when done. During copying, another writer may take the lock, also see
TP_STATUS_KERNEL, and start writing to the same slot.
Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a
slot, test and set with the lock held. To release race-free, update
tp_status and owner bit as a transaction, so take the lock again.
This is the one of a variety of discussed options (see Link below):
* instead of a shadow ring, embed the data in the slot itself, such as
in tp_padding. But any test for this field may match a value left by
userspace, causing deadlock.
* avoid the lock on release. This leaves a small race if releasing the
shadow slot before setting TP_STATUS_USER. The below reproducer showed
that this race is not academic. If releasing the slot after tp_status,
the race is more subtle. See the first link for details.
* add a new tp_status TP_KERNEL_OWNED to avoid the transactional store
of two fields. But, legacy applications may interpret all non-zero
tp_status as owned by the user. As libpcap does. So this is possible
only opt-in by newer processes. It can be added as an optional mode.
* embed the struct at the tail of pg_vec to avoid extra allocation.
The implementation proved no less complex than a separate field.
The additional locking cost on release adds contention, no different
than scaling on multicore or multiqueue h/w. In practice, below
reproducer nor small packet tcpdump showed a noticeable change in
perf report in cycles spent in spinlock. Where contention is
problematic, packet sockets support mitigation through PACKET_FANOUT.
And we can consider adding opt-in state TP_KERNEL_OWNED.
Easy to reproduce by running multiple netperf or similar TCP_STREAM
flows concurrently with `tcpdump -B 129 -n greater 60000`.
Based on an earlier patchset by Jon Rosen. See links below.
I believe this issue goes back to the introduction of tpacket_rcv,
which predates git history.
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.html
Suggested-by: Jon Rosen <jrosen@cisco.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jon Rosen <jrosen@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 00:18:09 +08:00
|
|
|
union {
|
|
|
|
unsigned long *rx_owner_map;
|
|
|
|
struct tpacket_kbdq_core prb_bdqc;
|
|
|
|
};
|
2012-08-13 13:49:39 +08:00
|
|
|
};
|
|
|
|
|
2012-08-16 13:36:48 +08:00
|
|
|
extern struct mutex fanout_mutex;
|
2020-11-07 02:07:40 +08:00
|
|
|
#define PACKET_FANOUT_MAX (1 << 16)
|
2012-08-16 13:36:48 +08:00
|
|
|
|
|
|
|
struct packet_fanout {
|
2015-03-12 12:06:44 +08:00
|
|
|
possible_net_t net;
|
2012-08-16 13:36:48 +08:00
|
|
|
unsigned int num_members;
|
2020-11-07 02:07:40 +08:00
|
|
|
u32 max_num_members;
|
2012-08-16 13:36:48 +08:00
|
|
|
u16 id;
|
|
|
|
u8 type;
|
packet: packet fanout rollover during socket overload
Changes:
v3->v2: rebase (no other changes)
passes selftest
v2->v1: read f->num_members only once
fix bug: test rollover mode + flag
Minimize packet drop in a fanout group. If one socket is full,
roll over packets to another from the group. Maintain flow
affinity during normal load using an rxhash fanout policy, while
dispersing unexpected traffic storms that hit a single cpu, such
as spoofed-source DoS flows. Rollover breaks affinity for flows
arriving at saturated sockets during those conditions.
The patch adds a fanout policy ROLLOVER that rotates between sockets,
filling each socket before moving to the next. It also adds a fanout
flag ROLLOVER. If passed along with any other fanout policy, the
primary policy is applied until the chosen socket is full. Then,
rollover selects another socket, to delay packet drop until the
entire system is saturated.
Probing sockets is not free. Selecting the last used socket, as
rollover does, is a greedy approach that maximizes chance of
success, at the cost of extreme load imbalance. In practice, with
sufficiently long queues to absorb bursts, sockets are drained in
parallel and load balance looks uniform in `top`.
To avoid contention, scales counters with number of sockets and
accesses them lockfree. Values are bounds checked to ensure
correctness.
Tested using an application with 9 threads pinned to CPUs, one socket
per thread and sufficient busywork per packet operation to limits each
thread to handling 32 Kpps. When sent 500 Kpps single UDP stream
packets, a FANOUT_CPU setup processes 32 Kpps in total without this
patch, 270 Kpps with the patch. Tested with read() and with a packet
ring (V1).
Also, passes psock_fanout.c unit test added to selftests.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19 18:18:11 +08:00
|
|
|
u8 flags;
|
2015-08-15 10:31:34 +08:00
|
|
|
union {
|
|
|
|
atomic_t rr_cur;
|
|
|
|
struct bpf_prog __rcu *bpf_prog;
|
|
|
|
};
|
2012-08-16 13:36:48 +08:00
|
|
|
struct list_head list;
|
|
|
|
spinlock_t lock;
|
2017-06-30 18:08:10 +08:00
|
|
|
refcount_t sk_ref;
|
2012-08-16 13:36:48 +08:00
|
|
|
struct packet_type prot_hook ____cacheline_aligned_in_smp;
|
2021-04-15 03:36:44 +08:00
|
|
|
struct sock __rcu *arr[];
|
2012-08-16 13:36:48 +08:00
|
|
|
};
|
|
|
|
|
2015-05-12 23:56:46 +08:00
|
|
|
struct packet_rollover {
|
|
|
|
int sock;
|
2015-05-12 23:56:50 +08:00
|
|
|
atomic_long_t num;
|
|
|
|
atomic_long_t num_huge;
|
|
|
|
atomic_long_t num_failed;
|
2015-05-12 23:56:49 +08:00
|
|
|
#define ROLLOVER_HLEN (L1_CACHE_BYTES / sizeof(u32))
|
|
|
|
u32 history[ROLLOVER_HLEN] ____cacheline_aligned;
|
2015-05-12 23:56:46 +08:00
|
|
|
} ____cacheline_aligned_in_smp;
|
|
|
|
|
2012-08-13 13:49:39 +08:00
|
|
|
struct packet_sock {
|
|
|
|
/* struct sock has to be the first member of packet_sock */
|
|
|
|
struct sock sk;
|
|
|
|
struct packet_fanout *fanout;
|
2013-04-19 14:12:29 +08:00
|
|
|
union tpacket_stats_u stats;
|
2012-08-13 13:49:39 +08:00
|
|
|
struct packet_ring_buffer rx_ring;
|
|
|
|
struct packet_ring_buffer tx_ring;
|
|
|
|
int copy_thresh;
|
|
|
|
spinlock_t bind_lock;
|
|
|
|
struct mutex pg_vec_lock;
|
2023-03-16 09:10:07 +08:00
|
|
|
unsigned long flags;
|
2012-08-13 13:49:39 +08:00
|
|
|
int ifindex; /* bound device */
|
net/packet: support mergeable feature of virtio
Packet sockets, like tap, can be used as the backend for kernel vhost.
In packet sockets, virtio net header size is currently hardcoded to be
the size of struct virtio_net_hdr, which is 10 bytes; however, it is not
always the case: some virtio features, such as mrg_rxbuf, need virtio
net header to be 12-byte long.
Mergeable buffers, as a virtio feature, is worthy of supporting: packets
that are larger than one-mbuf size will be dropped in vhost worker's
handle_rx if mrg_rxbuf feature is not used, but large packets
cannot be avoided and increasing mbuf's size is not economical.
With this virtio feature enabled by virtio-user, packet sockets with
hardcoded 10-byte virtio net header will parse mac head incorrectly in
packet_snd by taking the last two bytes of virtio net header as part of
mac header.
This incorrect mac header parsing will cause packet to be dropped due to
invalid ether head checking in later under-layer device packet receiving.
By adding extra field vnet_hdr_sz with utilizing holes in struct
packet_sock to record currently used virtio net header size and supporting
extra sockopt PACKET_VNET_HDR_SZ to set specified vnet_hdr_sz, packet
sockets can know the exact length of virtio net header that virtio user
gives.
In packet_snd, tpacket_snd and packet_recvmsg, instead of using
hardcoded virtio net header size, it can get the exact vnet_hdr_sz from
corresponding packet_sock, and parse mac header correctly based on this
information to avoid the packets being mistakenly dropped.
Signed-off-by: Jianfeng Tan <henry.tjf@antgroup.com>
Co-developed-by: Anqi Shen <amy.saq@antgroup.com>
Signed-off-by: Anqi Shen <amy.saq@antgroup.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19 15:24:16 +08:00
|
|
|
u8 vnet_hdr_sz;
|
2012-08-13 13:49:39 +08:00
|
|
|
__be16 num;
|
2015-05-12 23:56:46 +08:00
|
|
|
struct packet_rollover *rollover;
|
2012-08-13 13:49:39 +08:00
|
|
|
struct packet_mclist *mclist;
|
2023-12-01 21:10:21 +08:00
|
|
|
atomic_long_t mapped;
|
2012-08-13 13:49:39 +08:00
|
|
|
enum tpacket_versions tp_version;
|
|
|
|
unsigned int tp_hdrlen;
|
|
|
|
unsigned int tp_reserve;
|
|
|
|
unsigned int tp_tstamp;
|
af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel. This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).
However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.
We can fix this by converting the schedule call to a completion
mechanism. By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.
Tested by myself and the reporter, with good results
Change Notes:
V1->V2:
Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)
V2->V3:
Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status. Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)
Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)
V3->V4:
Willem has requested that the control flow be restored to the
previous state. Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call. This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed. To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.
Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
Clean up some extra newlines (Willem de Bruijn)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 05:57:49 +08:00
|
|
|
struct completion skb_completion;
|
2013-11-21 23:50:58 +08:00
|
|
|
struct net_device __rcu *cached_dev;
|
2012-08-13 13:49:39 +08:00
|
|
|
struct packet_type prot_hook ____cacheline_aligned_in_smp;
|
2019-06-13 00:52:30 +08:00
|
|
|
atomic_t tp_drops ____cacheline_aligned_in_smp;
|
2012-08-13 13:49:39 +08:00
|
|
|
};
|
|
|
|
|
2023-03-17 23:55:31 +08:00
|
|
|
#define pkt_sk(ptr) container_of_const(ptr, struct packet_sock, sk)
|
2012-08-13 13:49:39 +08:00
|
|
|
|
2023-03-16 09:10:07 +08:00
|
|
|
enum packet_sock_flags {
|
|
|
|
PACKET_SOCK_ORIGDEV,
|
2023-03-16 09:10:08 +08:00
|
|
|
PACKET_SOCK_AUXDATA,
|
2023-03-16 09:10:10 +08:00
|
|
|
PACKET_SOCK_TX_HAS_OFF,
|
2023-03-16 09:10:11 +08:00
|
|
|
PACKET_SOCK_TP_LOSS,
|
2023-03-16 09:10:13 +08:00
|
|
|
PACKET_SOCK_RUNNING,
|
2023-03-16 09:10:14 +08:00
|
|
|
PACKET_SOCK_PRESSURE,
|
2023-03-18 00:20:02 +08:00
|
|
|
PACKET_SOCK_QDISC_BYPASS,
|
2023-03-16 09:10:07 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static inline void packet_sock_flag_set(struct packet_sock *po,
|
|
|
|
enum packet_sock_flags flag,
|
|
|
|
bool val)
|
|
|
|
{
|
|
|
|
if (val)
|
|
|
|
set_bit(flag, &po->flags);
|
|
|
|
else
|
|
|
|
clear_bit(flag, &po->flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool packet_sock_flag(const struct packet_sock *po,
|
|
|
|
enum packet_sock_flags flag)
|
|
|
|
{
|
|
|
|
return test_bit(flag, &po->flags);
|
|
|
|
}
|
|
|
|
|
2012-08-13 13:49:39 +08:00
|
|
|
#endif
|