korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 17:54:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
acd2b672b4
linux/include/target/target_core_backend.h

142 lines
5.8 KiB
C
Raw Normal View History

target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
#ifndef TARGET_CORE_BACKEND_H
#define TARGET_CORE_BACKEND_H
#define TRANSPORT_PLUGIN_PHBA_PDEV 1
#define TRANSPORT_PLUGIN_VHBA_PDEV 2
#define TRANSPORT_PLUGIN_VHBA_VDEV 3
target: Move dev_cit to struct se_subsystem_api This patch adds initial support for dev_cit as external config_item_type. This includes a new struct target_backend_cits to hold the external CITs within struct se_subsystem_api, and target_core_setup_sub_cits() to be used by backend drivers ahead of transport_subsystem_register(). It adds a TB_CIT_SETUP() helper following target_core_fabric_configfs.c to perform the config_item_type assignments. Also, drop left-over target_core_dev_cit from target_core_configfs.c code and update comments. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 05:59:20 +08:00
struct target_backend_cits {
struct config_item_type tb_dev_cit;
target: Move dev_attrib_cit to struct se_subsystem_api This patch adds support for dev_attrib_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets both ct_item_ops + ct_attr following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_attrib_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 06:51:14 +08:00
struct config_item_type tb_dev_attrib_cit;
target: Move dev_pr_cit to struct se_subsystem_api This patch adds support for dev_pr_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets both ct_item_ops + ct_attr following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_pr_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 06:57:01 +08:00
struct config_item_type tb_dev_pr_cit;
target: Move dev_wwn_cit to struct se_subsystem_api This patch adds support for dev_wwn_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets both ct_item_ops + ct_attr following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_wwn_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 07:01:12 +08:00
struct config_item_type tb_dev_wwn_cit;
target: Move dev_alua_tg_pt_gps_cit to struct se_subsystem_api This patch adds support for dev_alua_tg_pt_gps_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets only ct_group_ops following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_alua_tg_pt_gps_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 07:06:23 +08:00
struct config_item_type tb_dev_alua_tg_pt_gps_cit;
target: Move dev_stat_cit to struct se_subsystem_api This patch adds support for dev_stat_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets only ct_group_ops following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_stat_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 07:09:32 +08:00
struct config_item_type tb_dev_stat_cit;
target: Move dev_cit to struct se_subsystem_api This patch adds initial support for dev_cit as external config_item_type. This includes a new struct target_backend_cits to hold the external CITs within struct se_subsystem_api, and target_core_setup_sub_cits() to be used by backend drivers ahead of transport_subsystem_register(). It adds a TB_CIT_SETUP() helper following target_core_fabric_configfs.c to perform the config_item_type assignments. Also, drop left-over target_core_dev_cit from target_core_configfs.c code and update comments. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 05:59:20 +08:00
};
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
struct se_subsystem_api {
struct list_head sub_api_list;
char name[16];
target: kill struct se_subsystem_dev Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-08 12:03:19 +08:00
char inquiry_prod[16];
char inquiry_rev[4];
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
struct module *owner;
u8 transport_type;
int (*attach_hba)(struct se_hba *, u32);
void (*detach_hba)(struct se_hba *);
int (*pmode_enable_hba)(struct se_hba *, unsigned long);
target: kill struct se_subsystem_dev Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-08 12:03:19 +08:00
struct se_device *(*alloc_device)(struct se_hba *, const char *);
int (*configure_device)(struct se_device *);
void (*free_device)(struct se_device *device);
ssize_t (*set_configfs_dev_params)(struct se_device *,
const char *, ssize_t);
ssize_t (*show_configfs_dev_params)(struct se_device *, char *);
target: fix use-after-free with PSCSI sense data The pointer to the sense buffer is fetched by transport_get_sense_data, but this is called by target_complete_ok_work long after pscsi_req_done has freed the struct that contains it. Pass instead the fabric's sense buffer to transport_complete, and copy the data to it directly in transport_complete. Setting SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05 23:09:15 +08:00
void (*transport_complete)(struct se_cmd *cmd,
struct scatterlist *,
unsigned char *);
target: add a parse_cdb method to the backend drivers Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-20 23:59:14 +08:00
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 04:24:09 +08:00
sense_reason_t (*parse_cdb)(struct se_cmd *cmd);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
u32 (*get_device_type)(struct se_device *);
sector_t (*get_blocks)(struct se_device *);
target: Pass through I/O topology for block backstores In addition to block size (already implemented), passing through alignment offset, logical-to-phys block exponent, I/O granularity and optimal I/O length will allow initiators to properly handle layout on LUNs with 4K block sizes. Tested with various weird values via scsi_debug module. One thing to look at with this patch is the new block limits values -- instead of granularity 1 optimal 8192, Lio will now be returning whatever the block device says, which may affect performance. Signed-off-by: Andy Grover <agrover@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-12 00:59:17 +08:00
sector_t (*get_alignment_offset_lbas)(struct se_device *);
/* lbppbe = logical blocks per physical block exponent. see SBC-3 */
unsigned int (*get_lbppbe)(struct se_device *);
unsigned int (*get_io_min)(struct se_device *);
unsigned int (*get_io_opt)(struct se_device *);
target: remove struct se_task We can use struct se_cmd for everything it did. Make sure to pass the S/G list and data direction to the execution function to ease adding back BIDI support later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-24 12:25:06 +08:00
unsigned char *(*get_sense_buffer)(struct se_cmd *);
target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status This patch allows IBLOCK to check block hints in request_queue->flush_flags when reporting current backend device WriteCacheEnabled status to a remote SCSI initiator port. This is done via a se_subsystem_api->get_write_cache() call instead of a backend se_device creation time flag, as we expect REQ_FLUSH bits to possibly change from an underlying blk_queue_flush() by the SCSI disk driver, or internal raw struct block_device driver usage. Also go ahead and update iblock_execute_rw() bio I/O path code to use REQ_FLUSH + REQ_FUA hints when determining WRITE_FUA usage, and make SPC emulation code use a spc_check_dev_wce() helper to handle both types of cases for virtual backend subsystem drivers. (asias: Drop unnecessary comparsion operators) Reported-by: majianpeng <majianpeng@gmail.com> Cc: majianpeng <majianpeng@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-30 14:10:06 +08:00
bool (*get_write_cache)(struct se_device *);
target: Add DIF related base definitions This patch adds DIF related definitions to target_core_base.h that includes enums for target_prot_op + target_prot_type + target_prot_version + target_guard_type + target_pi_error. Also included is struct se_dif_v1_tuple, along with changes to struct se_cmd, struct se_dev_attrib, and struct se_device. Also, add new se_subsystem_api->[init,format,free]_prot() callers used by target core code to setup backend specific protection information after the device has been configured. Enums taken from Sagi Grimberg's original patch. v2 changes: - Drop guard_type related definitions - Update target_prot_op + target_prot_ho definitions (Sagi) - Drop SCF_PROT + pi_prot_version flag - Add se_subsystem_api->format_prot() (Sagi) - Add hw_pi_prot_type device attribute Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-24 04:28:13 +08:00
int (*init_prot)(struct se_device *);
int (*format_prot)(struct se_device *);
void (*free_prot)(struct se_device *);
target: Move dev_cit to struct se_subsystem_api This patch adds initial support for dev_cit as external config_item_type. This includes a new struct target_backend_cits to hold the external CITs within struct se_subsystem_api, and target_core_setup_sub_cits() to be used by backend drivers ahead of transport_subsystem_register(). It adds a TB_CIT_SETUP() helper following target_core_fabric_configfs.c to perform the config_item_type assignments. Also, drop left-over target_core_dev_cit from target_core_configfs.c code and update comments. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 05:59:20 +08:00
struct target_backend_cits tb_cits;
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
};
target: rename spc_ops These really are sbc_ops, so name them correctly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-07 22:55:50 +08:00
struct sbc_ops {
target: Allow sbc_ops->execute_rw() to accept SGLs + data_direction COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE to obtain the necessary READ payload for comparision against the first half of the WRITE payload containing the verify user data. Currently virtual backends expect to internally reference SGLs, SGL nents, and data_direction, so change IBLOCK, FILEIO and RD sbc_ops->execute_rw() to accept this values as function parameters. Also add default sbc_execute_rw() handler for the typical case for cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents, and cmd->data_direction). v2 Changes: - Add SCF_COMPARE_AND_WRITE command flag - Use sbc_execute_rw() for normal cmd->execute_rw() submission with expected se_cmd members. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-20 14:57:30 +08:00
sense_reason_t (*execute_rw)(struct se_cmd *cmd, struct scatterlist *,
u32, enum dma_data_direction);
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 04:24:09 +08:00
sense_reason_t (*execute_sync_cache)(struct se_cmd *cmd);
sense_reason_t (*execute_write_same)(struct se_cmd *cmd);
target/sbc: Seperate WRITE_SAME based on UNMAP flag in sbc_ops This patch adds a new sbc_ops->execute_write_same_unmap() caller for use with WRITE_SAME w/ UNMAP=1, and performs the ->execute_cmd() setup based this bit within sbc_setup_write_same() code. Also, makes the changes in sbc_parse_cdb() to handle a sense_reason_t return from sbc_setup_write_same() on error. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-08 12:01:10 +08:00
sense_reason_t (*execute_write_same_unmap)(struct se_cmd *cmd);
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 04:24:09 +08:00
sense_reason_t (*execute_unmap)(struct se_cmd *cmd);
target: add struct spc_ops + initial ->execute_rw pointer usage Remove the execute_cmd method in struct se_subsystem_api, and always use the one directly in struct se_cmd. To make life simpler for SBC virtual backends a struct spc_ops that is passed to sbc_parse_cmd is added. For now it only contains an execute_rw member, but more will follow with the subsequent commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-18 06:40:52 +08:00
};
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
int transport_subsystem_register(struct se_subsystem_api *);
void transport_subsystem_release(struct se_subsystem_api *);
target: replace ->execute_task with ->execute_cmd Make CDB emulation work on commands instead of tasks again as a preparation of removing tasks completely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-23 23:35:33 +08:00
void target_complete_cmd(struct se_cmd *, u8);
target: Report correct response length for some commands When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11 02:07:47 +08:00
void target_complete_cmd_with_length(struct se_cmd *, u8, int);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 04:24:09 +08:00
sense_reason_t spc_parse_cdb(struct se_cmd *cmd, unsigned int *size);
sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd);
target: Export SPC inquiry emulation Some target drivers might need to access the inquiry data directly, without sending out the actual command. So export these functions. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-17 16:53:35 +08:00
sense_reason_t spc_emulate_inquiry_std(struct se_cmd *, unsigned char *);
sense_reason_t spc_emulate_evpd_83(struct se_cmd *, unsigned char *);
target: add a parse_cdb method to the backend drivers Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-20 23:59:14 +08:00
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 04:24:09 +08:00
sense_reason_t sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops);
target: provide generic sbc device type/revision helpers Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-07 22:55:53 +08:00
u32 sbc_get_device_rev(struct se_device *dev);
u32 sbc_get_device_type(struct se_device *dev);
target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors Trivial, but WRITE SAME is an SBC command so it seems strange for a related function (defined in target_core_sbc.c) to be in the spc_ namespace. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-23 01:52:57 +08:00
sector_t sbc_get_write_same_sectors(struct se_cmd *cmd);
target: Add sbc_execute_unmap() helper iblock_execute_unmap() and fd_execute_unmap share a lot of code. Add sbc_execute_unmap() helper to remove duplicated code for iblock_execute_unmap() and fd_execute_unmap(). Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-25 14:03:46 +08:00
sense_reason_t sbc_execute_unmap(struct se_cmd *cmd,
sense_reason_t (*do_unmap_fn)(struct se_cmd *cmd, void *priv,
sector_t lba, sector_t nolb),
void *priv);
target/sbc: Add sbc_dif_generate software emulation This patch adds WRITE_INSERT emulation within target-core using TYPE1 / TYPE3 PI modes in sbc_dif_generate() code. This is useful in order for existing legacy fabrics that do not support protection offloads to interact with backend devices that currently have T10 PI enabled. v2 changes: - Rename to sbc_dif_generate() (Sagi) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-03 05:19:09 +08:00
void sbc_dif_generate(struct se_cmd *);
target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulation This patch adds support for DIF read/write verify emulation for TARGET_DIF_TYPE1_PROT + TARGET_DIF_TYPE3_PROT operation. This includes sbc_dif_verify_write() + sbc_dif_verify_read() calls accessable by backend drivers to perform DIF verify for SGL based data and protection information. Also included is sbc_dif_copy_prot() logic to copy protection information to/from backend provided protection SGLs. Based on scsi_debug.c DIF TYPE1+TYPE3 emulation. v2 changes: - Select CRC_T10DIF for TARGET_CORE in Kconfig (Fengguang) - Drop IP checksum logic from sbc_dif_v1_verify (MKP) - Fix offset on app_tag = 0xffff in sbc_dif_verify_read() Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-08 06:44:57 +08:00
sense_reason_t sbc_dif_verify_write(struct se_cmd *, sector_t, unsigned int,
unsigned int, struct scatterlist *, int);
sense_reason_t sbc_dif_verify_read(struct se_cmd *, sector_t, unsigned int,
unsigned int, struct scatterlist *, int);
target/sbc: Add sbc_dif_read_strip software emulation Split up __sbc_dif_verify_read() so that VERIFY READ emulation can perform target-core specific READ_STRIP, seperate from the existing FILEIO/RAMDISK backend emulation code. Also add sbc_dif_read_strip() in order to determine number of sectors using cmd->prot_length, and skip the extra sbc_dif_copy_prot(). Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-03 05:34:11 +08:00
sense_reason_t sbc_dif_read_strip(struct se_cmd *);
target: provide generic sbc device type/revision helpers Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-07 22:55:53 +08:00
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
void transport_set_vpd_proto_id(struct t10_vpd *, unsigned char *);
int transport_set_vpd_assoc(struct t10_vpd *, unsigned char *);
int transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *);
int transport_set_vpd_ident(struct t10_vpd *, unsigned char *);
/* core helpers also used by command snooping in pscsi */
target: Allow control CDBs with data > 1 page We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-17 08:57:08 +08:00
void *transport_kmap_data_sg(struct se_cmd *);
void transport_kunmap_data_sg(struct se_cmd *);
target: Make helpers non static for EXTENDED_COPY command setup Both target_alloc_sgl() and transport_generic_map_mem_to_cmd() are required by EXTENDED_COPY logic when setting up internally dispatched command descriptors, so go ahead and make both of these non static. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-23 02:58:43 +08:00
/* core helpers also used by xcopy during internal command setup */
int target_alloc_sgl(struct scatterlist **, unsigned int *, u32, bool);
sense_reason_t transport_generic_map_mem_to_cmd(struct se_cmd *,
struct scatterlist *, u32, struct scatterlist *, u32);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
target: Use array_zalloc for tpg_lun_list Turns an order-10 allocation into slab-sized ones, thereby preventing allocation failures with memory fragmentation. This likely saves memory as well, as the slab allocator can pack objects more tightly than the buddy allocator. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-16 03:05:12 +08:00
void array_free(void *array, int n);
target: Move dev_cit to struct se_subsystem_api This patch adds initial support for dev_cit as external config_item_type. This includes a new struct target_backend_cits to hold the external CITs within struct se_subsystem_api, and target_core_setup_sub_cits() to be used by backend drivers ahead of transport_subsystem_register(). It adds a TB_CIT_SETUP() helper following target_core_fabric_configfs.c to perform the config_item_type assignments. Also, drop left-over target_core_dev_cit from target_core_configfs.c code and update comments. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 05:59:20 +08:00
/* From target_core_configfs.c to setup default backend config_item_types */
void target_core_setup_sub_cits(struct se_subsystem_api *);
target: Add EXPORT_SYMBOL for existing se_dev_set_* Now that target_core_backend_configfs.h macros will be using these se_dev_set attribute functions externally to allow backend drivers to populate different attributes, go ahead and add EXPORT_SYMBOL() for the existing default set of 30 device attributes. Also update target_core_backend.h with proper function prototypes. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 11:15:48 +08:00
/* attribute helpers from target_core_device.c for backend drivers */
int se_dev_set_max_unmap_lba_count(struct se_device *, u32);
int se_dev_set_max_unmap_block_desc_count(struct se_device *, u32);
int se_dev_set_unmap_granularity(struct se_device *, u32);
int se_dev_set_unmap_granularity_alignment(struct se_device *, u32);
int se_dev_set_max_write_same_len(struct se_device *, u32);
int se_dev_set_emulate_model_alias(struct se_device *, int);
int se_dev_set_emulate_dpo(struct se_device *, int);
int se_dev_set_emulate_fua_write(struct se_device *, int);
int se_dev_set_emulate_fua_read(struct se_device *, int);
int se_dev_set_emulate_write_cache(struct se_device *, int);
int se_dev_set_emulate_ua_intlck_ctrl(struct se_device *, int);
int se_dev_set_emulate_tas(struct se_device *, int);
int se_dev_set_emulate_tpu(struct se_device *, int);
int se_dev_set_emulate_tpws(struct se_device *, int);
int se_dev_set_emulate_caw(struct se_device *, int);
int se_dev_set_emulate_3pc(struct se_device *, int);
int se_dev_set_pi_prot_type(struct se_device *, int);
int se_dev_set_pi_prot_format(struct se_device *, int);
int se_dev_set_enforce_pr_isids(struct se_device *, int);
int se_dev_set_force_pr_aptpl(struct se_device *, int);
int se_dev_set_is_nonrot(struct se_device *, int);
int se_dev_set_emulate_rest_reord(struct se_device *dev, int);
int se_dev_set_queue_depth(struct se_device *, u32);
int se_dev_set_max_sectors(struct se_device *, u32);
int se_dev_set_optimal_sectors(struct se_device *, u32);
int se_dev_set_block_size(struct se_device *, u32);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 22:46:48 +08:00
#endif /* TARGET_CORE_BACKEND_H */
Reference in New Issue Copy Permalink