linux/fs/dlm/user.c

1047 lines
25 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2006-2010 Red Hat, Inc. All rights reserved.
*/
#include <linux/miscdevice.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/signal.h>
#include <linux/spinlock.h>
#include <linux/dlm.h>
#include <linux/dlm_device.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sched/signal.h>
#include <trace/events/dlm.h>
#include "dlm_internal.h"
#include "lockspace.h"
#include "lock.h"
#include "lvb_table.h"
#include "user.h"
#include "ast.h"
#include "config.h"
#include "memory.h"
static const char name_prefix[] = "dlm";
static const struct file_operations device_fops;
static atomic_t dlm_monitor_opened;
static int dlm_monitor_unused = 1;
#ifdef CONFIG_COMPAT
struct dlm_lock_params32 {
__u8 mode;
__u8 namelen;
__u16 unused;
__u32 flags;
__u32 lkid;
__u32 parent;
__u64 xid;
__u64 timeout;
__u32 castparam;
__u32 castaddr;
__u32 bastparam;
__u32 bastaddr;
__u32 lksb;
char lvb[DLM_USER_LVB_LEN];
char name[];
};
struct dlm_write_request32 {
__u32 version[3];
__u8 cmd;
__u8 is64bit;
__u8 unused[2];
union {
struct dlm_lock_params32 lock;
struct dlm_lspace_params lspace;
struct dlm_purge_params purge;
} i;
};
struct dlm_lksb32 {
__u32 sb_status;
__u32 sb_lkid;
__u8 sb_flags;
__u32 sb_lvbptr;
};
struct dlm_lock_result32 {
__u32 version[3];
__u32 length;
__u32 user_astaddr;
__u32 user_astparam;
__u32 user_lksb;
struct dlm_lksb32 lksb;
__u8 bast_mode;
__u8 unused[3];
/* Offsets may be zero if no data is present */
__u32 lvb_offset;
};
static void compat_input(struct dlm_write_request *kb,
struct dlm_write_request32 *kb32,
int namelen)
{
kb->version[0] = kb32->version[0];
kb->version[1] = kb32->version[1];
kb->version[2] = kb32->version[2];
kb->cmd = kb32->cmd;
kb->is64bit = kb32->is64bit;
if (kb->cmd == DLM_USER_CREATE_LOCKSPACE ||
kb->cmd == DLM_USER_REMOVE_LOCKSPACE) {
kb->i.lspace.flags = kb32->i.lspace.flags;
kb->i.lspace.minor = kb32->i.lspace.minor;
memcpy(kb->i.lspace.name, kb32->i.lspace.name, namelen);
} else if (kb->cmd == DLM_USER_PURGE) {
kb->i.purge.nodeid = kb32->i.purge.nodeid;
kb->i.purge.pid = kb32->i.purge.pid;
} else {
kb->i.lock.mode = kb32->i.lock.mode;
kb->i.lock.namelen = kb32->i.lock.namelen;
kb->i.lock.flags = kb32->i.lock.flags;
kb->i.lock.lkid = kb32->i.lock.lkid;
kb->i.lock.parent = kb32->i.lock.parent;
kb->i.lock.xid = kb32->i.lock.xid;
kb->i.lock.timeout = kb32->i.lock.timeout;
dlm: remove __user conversion warnings This patch avoids the following sparse warning: fs/dlm/user.c:111:38: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:111:38: expected void [noderef] __user *castparam fs/dlm/user.c:111:38: got void * fs/dlm/user.c:112:37: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:112:37: expected void [noderef] __user *castaddr fs/dlm/user.c:112:37: got void * fs/dlm/user.c:113:38: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:113:38: expected void [noderef] __user *bastparam fs/dlm/user.c:113:38: got void * fs/dlm/user.c:114:37: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:114:37: expected void [noderef] __user *bastaddr fs/dlm/user.c:114:37: got void * fs/dlm/user.c:115:33: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:115:33: expected struct dlm_lksb [noderef] __user *lksb fs/dlm/user.c:115:33: got void * fs/dlm/user.c:130:39: warning: cast removes address space '__user' of expression fs/dlm/user.c:131:40: warning: cast removes address space '__user' of expression fs/dlm/user.c:132:36: warning: cast removes address space '__user' of expression So far I see there is no direct handling of copying a pointer value to another pointer value. The handling only copies the actual pointer address to a scalar type or vice versa. This should be okay because it never handles dereferencing anything of those addresses in the kernel space. To get rid of those warnings we doing some different casting which results in no warnings in sparse or compiler. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-05 04:06:43 +08:00
kb->i.lock.castparam = (__user void *)(long)kb32->i.lock.castparam;
kb->i.lock.castaddr = (__user void *)(long)kb32->i.lock.castaddr;
kb->i.lock.bastparam = (__user void *)(long)kb32->i.lock.bastparam;
kb->i.lock.bastaddr = (__user void *)(long)kb32->i.lock.bastaddr;
kb->i.lock.lksb = (__user void *)(long)kb32->i.lock.lksb;
memcpy(kb->i.lock.lvb, kb32->i.lock.lvb, DLM_USER_LVB_LEN);
memcpy(kb->i.lock.name, kb32->i.lock.name, namelen);
}
}
static void compat_output(struct dlm_lock_result *res,
struct dlm_lock_result32 *res32)
{
memset(res32, 0, sizeof(*res32));
res32->version[0] = res->version[0];
res32->version[1] = res->version[1];
res32->version[2] = res->version[2];
dlm: remove __user conversion warnings This patch avoids the following sparse warning: fs/dlm/user.c:111:38: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:111:38: expected void [noderef] __user *castparam fs/dlm/user.c:111:38: got void * fs/dlm/user.c:112:37: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:112:37: expected void [noderef] __user *castaddr fs/dlm/user.c:112:37: got void * fs/dlm/user.c:113:38: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:113:38: expected void [noderef] __user *bastparam fs/dlm/user.c:113:38: got void * fs/dlm/user.c:114:37: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:114:37: expected void [noderef] __user *bastaddr fs/dlm/user.c:114:37: got void * fs/dlm/user.c:115:33: warning: incorrect type in assignment (different address spaces) fs/dlm/user.c:115:33: expected struct dlm_lksb [noderef] __user *lksb fs/dlm/user.c:115:33: got void * fs/dlm/user.c:130:39: warning: cast removes address space '__user' of expression fs/dlm/user.c:131:40: warning: cast removes address space '__user' of expression fs/dlm/user.c:132:36: warning: cast removes address space '__user' of expression So far I see there is no direct handling of copying a pointer value to another pointer value. The handling only copies the actual pointer address to a scalar type or vice versa. This should be okay because it never handles dereferencing anything of those addresses in the kernel space. To get rid of those warnings we doing some different casting which results in no warnings in sparse or compiler. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2022-04-05 04:06:43 +08:00
res32->user_astaddr = (__u32)(__force long)res->user_astaddr;
res32->user_astparam = (__u32)(__force long)res->user_astparam;
res32->user_lksb = (__u32)(__force long)res->user_lksb;
res32->bast_mode = res->bast_mode;
res32->lvb_offset = res->lvb_offset;
res32->length = res->length;
res32->lksb.sb_status = res->lksb.sb_status;
res32->lksb.sb_flags = res->lksb.sb_flags;
res32->lksb.sb_lkid = res->lksb.sb_lkid;
res32->lksb.sb_lvbptr = (__u32)(long)res->lksb.sb_lvbptr;
}
#endif
/* should held proc->asts_spin lock */
void dlm_purge_lkb_callbacks(struct dlm_lkb *lkb)
{
struct dlm_callback *cb, *safe;
list_for_each_entry_safe(cb, safe, &lkb->lkb_callbacks, list) {
list_del(&cb->list);
kref_put(&cb->ref, dlm_release_callback);
}
clear_bit(DLM_IFL_CB_PENDING_BIT, &lkb->lkb_iflags);
/* invalidate */
dlm_callback_set_last_ptr(&lkb->lkb_last_cast, NULL);
dlm_callback_set_last_ptr(&lkb->lkb_last_cb, NULL);
lkb->lkb_last_bast_mode = -1;
}
/* Figure out if this lock is at the end of its life and no longer
available for the application to use. The lkb still exists until
the final ast is read. A lock becomes EOL in three situations:
1. a noqueue request fails with EAGAIN
2. an unlock completes with EUNLOCK
3. a cancel of a waiting request completes with ECANCEL/EDEADLK
An EOL lock needs to be removed from the process's list of locks.
And we can't allow any new operation on an EOL lock. This is
not related to the lifetime of the lkb struct which is managed
entirely by refcount. */
static int lkb_is_endoflife(int mode, int status)
{
switch (status) {
case -DLM_EUNLOCK:
return 1;
case -DLM_ECANCEL:
case -ETIMEDOUT:
case -EDEADLK:
case -EAGAIN:
if (mode == DLM_LOCK_IV)
return 1;
break;
}
return 0;
}
[DLM] overlapping cancel and unlock Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-28 22:56:46 +08:00
/* we could possibly check if the cancel of an orphan has resulted in the lkb
being removed and then remove that lkb from the orphans list and free it */
void dlm_user_add_ast(struct dlm_lkb *lkb, uint32_t flags, int mode,
int status, uint32_t sbflags)
{
struct dlm_ls *ls;
struct dlm_user_args *ua;
struct dlm_user_proc *proc;
int rv;
if (test_bit(DLM_DFL_ORPHAN_BIT, &lkb->lkb_dflags) ||
test_bit(DLM_IFL_DEAD_BIT, &lkb->lkb_iflags))
return;
ls = lkb->lkb_resource->res_ls;
spin_lock(&ls->ls_clear_proc_locks);
/* If ORPHAN/DEAD flag is set, it means the process is dead so an ast
can't be delivered. For ORPHAN's, dlm_clear_proc_locks() freed
[DLM] overlapping cancel and unlock Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-28 22:56:46 +08:00
lkb->ua so we can't try to use it. This second check is necessary
for cases where a completion ast is received for an operation that
began before clear_proc_locks did its cancel/unlock. */
if (test_bit(DLM_DFL_ORPHAN_BIT, &lkb->lkb_dflags) ||
test_bit(DLM_IFL_DEAD_BIT, &lkb->lkb_iflags))
goto out;
DLM_ASSERT(lkb->lkb_ua, dlm_print_lkb(lkb););
ua = lkb->lkb_ua;
proc = ua->proc;
if ((flags & DLM_CB_BAST) && ua->bastaddr == NULL)
goto out;
if ((flags & DLM_CB_CAST) && lkb_is_endoflife(mode, status))
set_bit(DLM_IFL_ENDOFLIFE_BIT, &lkb->lkb_iflags);
spin_lock(&proc->asts_spin);
[DLM] overlapping cancel and unlock Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-28 22:56:46 +08:00
rv = dlm_enqueue_lkb_callback(lkb, flags, mode, status, sbflags);
switch (rv) {
case DLM_ENQUEUE_CALLBACK_FAILURE:
spin_unlock(&proc->asts_spin);
WARN_ON_ONCE(1);
goto out;
case DLM_ENQUEUE_CALLBACK_NEED_SCHED:
kref_get(&lkb->lkb_ref);
list_add_tail(&lkb->lkb_cb_list, &proc->asts);
wake_up_interruptible(&proc->wait);
break;
case DLM_ENQUEUE_CALLBACK_SUCCESS:
break;
default:
WARN_ON_ONCE(1);
break;
}
spin_unlock(&proc->asts_spin);
if (test_bit(DLM_IFL_ENDOFLIFE_BIT, &lkb->lkb_iflags)) {
/* N.B. spin_lock locks_spin, not asts_spin */
spin_lock(&proc->locks_spin);
[DLM] overlapping cancel and unlock Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-28 22:56:46 +08:00
if (!list_empty(&lkb->lkb_ownqueue)) {
list_del_init(&lkb->lkb_ownqueue);
dlm_put_lkb(lkb);
}
spin_unlock(&proc->locks_spin);
}
out:
spin_unlock(&ls->ls_clear_proc_locks);
}
static int device_user_lock(struct dlm_user_proc *proc,
struct dlm_lock_params *params)
{
struct dlm_ls *ls;
struct dlm_user_args *ua;
uint32_t lkid;
int error = -ENOMEM;
ls = dlm_find_lockspace_local(proc->lockspace);
if (!ls)
return -ENOENT;
if (!params->castaddr || !params->lksb) {
error = -EINVAL;
goto out;
}
ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);
if (!ua)
goto out;
ua->proc = proc;
ua->user_lksb = params->lksb;
ua->castparam = params->castparam;
ua->castaddr = params->castaddr;
ua->bastparam = params->bastparam;
ua->bastaddr = params->bastaddr;
ua->xid = params->xid;
if (params->flags & DLM_LKF_CONVERT) {
error = dlm_user_convert(ls, ua,
params->mode, params->flags,
params->lkid, params->lvb);
} else if (params->flags & DLM_LKF_ORPHAN) {
error = dlm_user_adopt_orphan(ls, ua,
params->mode, params->flags,
params->name, params->namelen,
&lkid);
if (!error)
error = lkid;
} else {
error = dlm_user_request(ls, ua,
params->mode, params->flags,
params->name, params->namelen);
if (!error)
error = ua->lksb.sb_lkid;
}
out:
dlm_put_lockspace(ls);
return error;
}
static int device_user_unlock(struct dlm_user_proc *proc,
struct dlm_lock_params *params)
{
struct dlm_ls *ls;
struct dlm_user_args *ua;
int error = -ENOMEM;
ls = dlm_find_lockspace_local(proc->lockspace);
if (!ls)
return -ENOENT;
ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);
if (!ua)
goto out;
ua->proc = proc;
ua->user_lksb = params->lksb;
ua->castparam = params->castparam;
ua->castaddr = params->castaddr;
if (params->flags & DLM_LKF_CANCEL)
error = dlm_user_cancel(ls, ua, params->flags, params->lkid);
else
error = dlm_user_unlock(ls, ua, params->flags, params->lkid,
params->lvb);
out:
dlm_put_lockspace(ls);
return error;
}
static int device_user_deadlock(struct dlm_user_proc *proc,
struct dlm_lock_params *params)
{
struct dlm_ls *ls;
int error;
ls = dlm_find_lockspace_local(proc->lockspace);
if (!ls)
return -ENOENT;
error = dlm_user_deadlock(ls, params->flags, params->lkid);
dlm_put_lockspace(ls);
return error;
}
static int dlm_device_register(struct dlm_ls *ls, char *name)
{
int error, len;
/* The device is already registered. This happens when the
lockspace is created multiple times from userspace. */
if (ls->ls_device.name)
return 0;
error = -ENOMEM;
len = strlen(name) + strlen(name_prefix) + 2;
ls->ls_device.name = kzalloc(len, GFP_NOFS);
if (!ls->ls_device.name)
goto fail;
snprintf((char *)ls->ls_device.name, len, "%s_%s", name_prefix,
name);
ls->ls_device.fops = &device_fops;
ls->ls_device.minor = MISC_DYNAMIC_MINOR;
error = misc_register(&ls->ls_device);
if (error) {
kfree(ls->ls_device.name);
dlm: avoid double-free on error path in dlm_device_{register,unregister} Can be reproduced when running dlm_controld (tested on 4.4.x, 4.12.4): # seq 1 100 | xargs -P0 -n1 dlm_tool join # seq 1 100 | xargs -P0 -n1 dlm_tool leave misc_register fails due to duplicate sysfs entry, which causes dlm_device_register to free ls->ls_device.name. In dlm_device_deregister the name was freed again, causing memory corruption. According to the comment in dlm_device_deregister the name should've been set to NULL when registration fails, so this patch does that. sysfs: cannot create duplicate filename '/dev/char/10:1' ------------[ cut here ]------------ warning: cpu: 1 pid: 4450 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x56/0x70 modules linked in: msr rfcomm dlm ccm bnep dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb media btrtl btbcm btintel bluetooth ecdh_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel thinkpad_acpi pcbc nvram snd_seq_midi snd_seq_midi_event aesni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_rawmidi aes_x86_64 crypto_simd glue_helper snd_hda_intel snd_hda_codec cryptd intel_cstate arc4 snd_hda_core snd_seq snd_seq_device snd_hwdep iwldvm intel_rapl_perf mac80211 joydev input_leds iwlwifi serio_raw cfg80211 snd_pcm shpchp snd_timer snd mac_hid mei_me lpc_ich mei soundcore sunrpc parport_pc ppdev lp parport autofs4 i915 psmouse e1000e ahci libahci i2c_algo_bit sdhci_pci ptp drm_kms_helper sdhci pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video cpu: 1 pid: 4450 comm: dlm_test.exe not tainted 4.12.4-041204-generic hardware name: lenovo 232425u/232425u, bios g2et82ww (2.02 ) 09/11/2012 task: ffff96b0cbabe140 task.stack: ffffb199027d0000 rip: 0010:sysfs_warn_dup+0x56/0x70 rsp: 0018:ffffb199027d3c58 eflags: 00010282 rax: 0000000000000038 rbx: ffff96b0e2c49158 rcx: 0000000000000006 rdx: 0000000000000000 rsi: 0000000000000086 rdi: ffff96b15e24dcc0 rbp: ffffb199027d3c70 r08: 0000000000000001 r09: 0000000000000721 r10: ffffb199027d3c00 r11: 0000000000000721 r12: ffffb199027d3cd1 r13: ffff96b1592088f0 r14: 0000000000000001 r15: ffffffffffffffef fs: 00007f78069c0700(0000) gs:ffff96b15e240000(0000) knlgs:0000000000000000 cs: 0010 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 000000178625ed28 cr3: 0000000091d3e000 cr4: 00000000001406e0 call trace: sysfs_do_create_link_sd.isra.2+0x9e/0xb0 sysfs_create_link+0x25/0x40 device_add+0x5a9/0x640 device_create_groups_vargs+0xe0/0xf0 device_create_with_groups+0x3f/0x60 ? snprintf+0x45/0x70 misc_register+0x140/0x180 device_write+0x6a8/0x790 [dlm] __vfs_write+0x37/0x160 ? apparmor_file_permission+0x1a/0x20 ? security_file_permission+0x3b/0xc0 vfs_write+0xb5/0x1a0 sys_write+0x55/0xc0 ? sys_fcntl+0x5d/0xb0 entry_syscall_64_fastpath+0x1e/0xa9 rip: 0033:0x7f78083454bd rsp: 002b:00007f78069bbd30 eflags: 00000293 orig_rax: 0000000000000001 rax: ffffffffffffffda rbx: 0000000000000006 rcx: 00007f78083454bd rdx: 000000000000009c rsi: 00007f78069bee00 rdi: 0000000000000005 rbp: 00007f77f8000a20 r08: 000000000000fcf0 r09: 0000000000000032 r10: 0000000000000024 r11: 0000000000000293 r12: 00007f78069bde00 r13: 00007f78069bee00 r14: 000000000000000a r15: 00007f78069bbd70 code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 2c c8 ff ff 4c 89 e2 48 89 de 48 c7 c7 b0 8e 0c a8 e8 41 e8 ed ff <0f> ff 48 89 df e8 00 d5 f4 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84 ---[ end trace 40412246357cc9e0 ]--- dlm: 59f24629-ae39-44e2-9030-397ebc2eda26: leaving the lockspace group... bug: unable to handle kernel null pointer dereference at 0000000000000001 ip: [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 pgd 0 oops: 0000 [#1] smp modules linked in: dlm 8021q garp mrp stp llc openvswitch nf_defrag_ipv6 nf_conntrack libcrc32c iptable_filter dm_multipath crc32_pclmul dm_mod aesni_intel psmouse aes_x86_64 sg ablk_helper cryptd lrw gf128mul glue_helper i2c_piix4 nls_utf8 tpm_tis tpm isofs nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc xen_wdt ip_tables x_tables autofs4 hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic pata_acpi 8139too serio_raw ata_piix 8139cp mii uhci_hcd ehci_pci ehci_hcd libata scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_mod ipv6 cpu: 0 pid: 394 comm: systemd-udevd tainted: g w 4.4.0+0 #1 hardware name: xen hvm domu, bios 4.7.2-2.2 05/11/2017 task: ffff880002410000 ti: ffff88000243c000 task.ti: ffff88000243c000 rip: e030:[<ffffffff811a3b4a>] [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 rsp: e02b:ffff88000243fd90 eflags: 00010202 rax: 0000000000000000 rbx: ffff8800029864d0 rcx: 000000000007b36c rdx: 000000000007b36b rsi: 00000000024000c0 rdi: ffff880036801c00 rbp: ffff88000243fdc0 r08: 0000000000018880 r09: 0000000000000054 r10: 000000000000004a r11: ffff880034ace6c0 r12: 00000000024000c0 r13: ffff880036801c00 r14: 0000000000000001 r15: ffffffff8118dcc2 fs: 00007f0ab77548c0(0000) gs:ffff880036e00000(0000) knlgs:0000000000000000 cs: e033 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 0000000000000001 cr3: 000000000332d000 cr4: 0000000000040660 stack: ffffffff8118dc90 ffff8800029864d0 0000000000000000 ffff88003430b0b0 ffff880034b78320 ffff88003430b0b0 ffff88000243fdf8 ffffffff8118dcc2 ffff8800349c6700 ffff8800029864d0 000000000000000b 00007f0ab7754b90 call trace: [<ffffffff8118dc90>] ? anon_vma_fork+0x60/0x140 [<ffffffff8118dcc2>] anon_vma_fork+0x92/0x140 [<ffffffff8107033e>] copy_process+0xcae/0x1a80 [<ffffffff8107128b>] _do_fork+0x8b/0x2d0 [<ffffffff81071579>] sys_clone+0x19/0x20 [<ffffffff815a30ae>] entry_syscall_64_fastpath+0x12/0x71 ] code: f6 75 1c 4c 89 fa 44 89 e6 4c 89 ef e8 a7 e4 00 00 41 f7 c4 00 80 00 00 49 89 c6 74 47 eb 32 49 63 45 20 48 8d 4a 01 4d 8b 45 00 <49> 8b 1c 06 4c 89 f0 65 49 0f c7 08 0f 94 c0 84 c0 74 ac 49 63 rip [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 rsp <ffff88000243fd90> cr2: 0000000000000001 --[ end trace 70cb9fd1b164a0e8 ]-- CC: stable@vger.kernel.org Signed-off-by: Edwin Török <edvin.torok@citrix.com> Signed-off-by: David Teigland <teigland@redhat.com>
2017-08-03 17:30:06 +08:00
/* this has to be set to NULL
* to avoid a double-free in dlm_device_deregister
*/
ls->ls_device.name = NULL;
}
fail:
return error;
}
int dlm_device_deregister(struct dlm_ls *ls)
{
/* The device is not registered. This happens when the lockspace
was never used from userspace, or when device_create_lockspace()
calls dlm_release_lockspace() after the register fails. */
if (!ls->ls_device.name)
return 0;
misc_deregister(&ls->ls_device);
kfree(ls->ls_device.name);
return 0;
}
static int device_user_purge(struct dlm_user_proc *proc,
struct dlm_purge_params *params)
{
struct dlm_ls *ls;
int error;
ls = dlm_find_lockspace_local(proc->lockspace);
if (!ls)
return -ENOENT;
error = dlm_user_purge(ls, proc, params->nodeid, params->pid);
dlm_put_lockspace(ls);
return error;
}
static int device_create_lockspace(struct dlm_lspace_params *params)
{
dlm_lockspace_t *lockspace;
struct dlm_ls *ls;
int error;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
error = dlm_new_user_lockspace(params->name, dlm_config.ci_cluster_name,
params->flags, DLM_USER_LVB_LEN, NULL,
NULL, NULL, &lockspace);
if (error)
return error;
ls = dlm_find_lockspace_local(lockspace);
if (!ls)
return -ENOENT;
error = dlm_device_register(ls, params->name);
dlm_put_lockspace(ls);
if (error)
dlm_release_lockspace(lockspace, 0);
else
error = ls->ls_device.minor;
return error;
}
static int device_remove_lockspace(struct dlm_lspace_params *params)
{
dlm_lockspace_t *lockspace;
struct dlm_ls *ls;
int error, force = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
ls = dlm_find_lockspace_device(params->minor);
if (!ls)
return -ENOENT;
if (params->flags & DLM_USER_LSFLG_FORCEFREE)
force = 2;
lockspace = ls->ls_local_handle;
dlm_put_lockspace(ls);
/* The final dlm_release_lockspace waits for references to go to
zero, so all processes will need to close their device for the
ls before the release will proceed. release also calls the
device_deregister above. Converting a positive return value
from release to zero means that userspace won't know when its
release was the final one, but it shouldn't need to know. */
error = dlm_release_lockspace(lockspace, force);
if (error > 0)
error = 0;
return error;
}
/* Check the user's version matches ours */
static int check_version(struct dlm_write_request *req)
{
if (req->version[0] != DLM_DEVICE_VERSION_MAJOR ||
(req->version[0] == DLM_DEVICE_VERSION_MAJOR &&
req->version[1] > DLM_DEVICE_VERSION_MINOR)) {
printk(KERN_DEBUG "dlm: process %s (%d) version mismatch "
"user (%d.%d.%d) kernel (%d.%d.%d)\n",
current->comm,
task_pid_nr(current),
req->version[0],
req->version[1],
req->version[2],
DLM_DEVICE_VERSION_MAJOR,
DLM_DEVICE_VERSION_MINOR,
DLM_DEVICE_VERSION_PATCH);
return -EINVAL;
}
return 0;
}
/*
* device_write
*
* device_user_lock
* dlm_user_request -> request_lock
* dlm_user_convert -> convert_lock
*
* device_user_unlock
* dlm_user_unlock -> unlock_lock
* dlm_user_cancel -> cancel_lock
*
* device_create_lockspace
* dlm_new_lockspace
*
* device_remove_lockspace
* dlm_release_lockspace
*/
/* a write to a lockspace device is a lock or unlock request, a write
to the control device is to create/remove a lockspace */
static ssize_t device_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct dlm_user_proc *proc = file->private_data;
struct dlm_write_request *kbuf;
int error;
#ifdef CONFIG_COMPAT
if (count < sizeof(struct dlm_write_request32))
#else
if (count < sizeof(struct dlm_write_request))
#endif
return -EINVAL;
/*
* can't compare against COMPAT/dlm_write_request32 because
* we don't yet know if is64bit is zero
*/
if (count > sizeof(struct dlm_write_request) + DLM_RESNAME_MAXLEN)
return -EINVAL;
kbuf = memdup_user_nul(buf, count);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
if (check_version(kbuf)) {
error = -EBADE;
goto out_free;
}
#ifdef CONFIG_COMPAT
if (!kbuf->is64bit) {
struct dlm_write_request32 *k32buf;
int namelen = 0;
if (count > sizeof(struct dlm_write_request32))
namelen = count - sizeof(struct dlm_write_request32);
k32buf = (struct dlm_write_request32 *)kbuf;
/* add 1 after namelen so that the name string is terminated */
kbuf = kzalloc(sizeof(struct dlm_write_request) + namelen + 1,
GFP_NOFS);
if (!kbuf) {
kfree(k32buf);
return -ENOMEM;
}
if (proc)
set_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags);
compat_input(kbuf, k32buf, namelen);
kfree(k32buf);
}
#endif
/* do we really need this? can a write happen after a close? */
if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&
(proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))) {
error = -EINVAL;
goto out_free;
}
error = -EINVAL;
switch (kbuf->cmd)
{
case DLM_USER_LOCK:
if (!proc) {
log_print("no locking on control device");
goto out_free;
}
error = device_user_lock(proc, &kbuf->i.lock);
break;
case DLM_USER_UNLOCK:
if (!proc) {
log_print("no locking on control device");
goto out_free;
}
error = device_user_unlock(proc, &kbuf->i.lock);
break;
case DLM_USER_DEADLOCK:
if (!proc) {
log_print("no locking on control device");
goto out_free;
}
error = device_user_deadlock(proc, &kbuf->i.lock);
break;
case DLM_USER_CREATE_LOCKSPACE:
if (proc) {
log_print("create/remove only on control device");
goto out_free;
}
error = device_create_lockspace(&kbuf->i.lspace);
break;
case DLM_USER_REMOVE_LOCKSPACE:
if (proc) {
log_print("create/remove only on control device");
goto out_free;
}
error = device_remove_lockspace(&kbuf->i.lspace);
break;
case DLM_USER_PURGE:
if (!proc) {
log_print("no locking on control device");
goto out_free;
}
error = device_user_purge(proc, &kbuf->i.purge);
break;
default:
log_print("Unknown command passed to DLM device : %d\n",
kbuf->cmd);
}
out_free:
kfree(kbuf);
return error;
}
/* Every process that opens the lockspace device has its own "proc" structure
hanging off the open file that's used to keep track of locks owned by the
process and asts that need to be delivered to the process. */
static int device_open(struct inode *inode, struct file *file)
{
struct dlm_user_proc *proc;
struct dlm_ls *ls;
ls = dlm_find_lockspace_device(iminor(inode));
if (!ls)
return -ENOENT;
proc = kzalloc(sizeof(struct dlm_user_proc), GFP_NOFS);
if (!proc) {
dlm_put_lockspace(ls);
return -ENOMEM;
}
proc->lockspace = ls->ls_local_handle;
INIT_LIST_HEAD(&proc->asts);
INIT_LIST_HEAD(&proc->locks);
INIT_LIST_HEAD(&proc->unlocking);
spin_lock_init(&proc->asts_spin);
spin_lock_init(&proc->locks_spin);
init_waitqueue_head(&proc->wait);
file->private_data = proc;
return 0;
}
static int device_close(struct inode *inode, struct file *file)
{
struct dlm_user_proc *proc = file->private_data;
struct dlm_ls *ls;
ls = dlm_find_lockspace_local(proc->lockspace);
if (!ls)
return -ENOENT;
set_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags);
dlm_clear_proc_locks(ls, proc);
/* at this point no more lkb's should exist for this lockspace,
so there's no chance of dlm_user_add_ast() being called and
looking for lkb->ua->proc */
kfree(proc);
file->private_data = NULL;
dlm_put_lockspace(ls);
dlm_put_lockspace(ls); /* for the find in device_open() */
/* FIXME: AUTOFREE: if this ls is no longer used do
device_remove_lockspace() */
return 0;
}
static int copy_result_to_user(struct dlm_user_args *ua, int compat,
uint32_t flags, int mode, int copy_lvb,
char __user *buf, size_t count)
{
#ifdef CONFIG_COMPAT
struct dlm_lock_result32 result32;
#endif
struct dlm_lock_result result;
void *resultptr;
int error=0;
int len;
int struct_len;
memset(&result, 0, sizeof(struct dlm_lock_result));
result.version[0] = DLM_DEVICE_VERSION_MAJOR;
result.version[1] = DLM_DEVICE_VERSION_MINOR;
result.version[2] = DLM_DEVICE_VERSION_PATCH;
memcpy(&result.lksb, &ua->lksb, offsetof(struct dlm_lksb, sb_lvbptr));
result.user_lksb = ua->user_lksb;
/* FIXME: dlm1 provides for the user's bastparam/addr to not be updated
in a conversion unless the conversion is successful. See code
in dlm_user_convert() for updating ua from ua_tmp. OpenVMS, though,
notes that a new blocking AST address and parameter are set even if
the conversion fails, so maybe we should just do that. */
if (flags & DLM_CB_BAST) {
result.user_astaddr = ua->bastaddr;
result.user_astparam = ua->bastparam;
result.bast_mode = mode;
} else {
result.user_astaddr = ua->castaddr;
result.user_astparam = ua->castparam;
}
#ifdef CONFIG_COMPAT
if (compat)
len = sizeof(struct dlm_lock_result32);
else
#endif
len = sizeof(struct dlm_lock_result);
struct_len = len;
/* copy lvb to userspace if there is one, it's been updated, and
the user buffer has space for it */
if (copy_lvb && ua->lksb.sb_lvbptr && count >= len + DLM_USER_LVB_LEN) {
if (copy_to_user(buf+len, ua->lksb.sb_lvbptr,
DLM_USER_LVB_LEN)) {
error = -EFAULT;
goto out;
}
result.lvb_offset = len;
len += DLM_USER_LVB_LEN;
}
result.length = len;
resultptr = &result;
#ifdef CONFIG_COMPAT
if (compat) {
compat_output(&result, &result32);
resultptr = &result32;
}
#endif
if (copy_to_user(buf, resultptr, struct_len))
error = -EFAULT;
else
error = len;
out:
return error;
}
static int copy_version_to_user(char __user *buf, size_t count)
{
struct dlm_device_version ver;
memset(&ver, 0, sizeof(struct dlm_device_version));
ver.version[0] = DLM_DEVICE_VERSION_MAJOR;
ver.version[1] = DLM_DEVICE_VERSION_MINOR;
ver.version[2] = DLM_DEVICE_VERSION_PATCH;
if (copy_to_user(buf, &ver, sizeof(struct dlm_device_version)))
return -EFAULT;
return sizeof(struct dlm_device_version);
}
/* a read returns a single ast described in a struct dlm_lock_result */
static ssize_t device_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
struct dlm_user_proc *proc = file->private_data;
struct dlm_lkb *lkb;
DECLARE_WAITQUEUE(wait, current);
struct dlm_callback *cb;
int rv, copy_lvb = 0;
int old_mode, new_mode;
if (count == sizeof(struct dlm_device_version)) {
rv = copy_version_to_user(buf, count);
return rv;
}
if (!proc) {
log_print("non-version read from control device %zu", count);
return -EINVAL;
}
#ifdef CONFIG_COMPAT
if (count < sizeof(struct dlm_lock_result32))
#else
if (count < sizeof(struct dlm_lock_result))
#endif
return -EINVAL;
try_another:
/* do we really need this? can a read happen after a close? */
if (test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))
return -EINVAL;
spin_lock(&proc->asts_spin);
if (list_empty(&proc->asts)) {
if (file->f_flags & O_NONBLOCK) {
spin_unlock(&proc->asts_spin);
return -EAGAIN;
}
add_wait_queue(&proc->wait, &wait);
repeat:
set_current_state(TASK_INTERRUPTIBLE);
if (list_empty(&proc->asts) && !signal_pending(current)) {
spin_unlock(&proc->asts_spin);
schedule();
spin_lock(&proc->asts_spin);
goto repeat;
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&proc->wait, &wait);
if (signal_pending(current)) {
spin_unlock(&proc->asts_spin);
return -ERESTARTSYS;
}
}
/* if we empty lkb_callbacks, we don't want to unlock the spinlock
without removing lkb_cb_list; so empty lkb_cb_list is always
consistent with empty lkb_callbacks */
lkb = list_first_entry(&proc->asts, struct dlm_lkb, lkb_cb_list);
/* rem_lkb_callback sets a new lkb_last_cast */
old_mode = lkb->lkb_last_cast->mode;
rv = dlm_dequeue_lkb_callback(lkb, &cb);
switch (rv) {
case DLM_DEQUEUE_CALLBACK_EMPTY:
/* this shouldn't happen; lkb should have been removed from
* list when last item was dequeued
*/
log_print("dlm_rem_lkb_callback empty %x", lkb->lkb_id);
list_del_init(&lkb->lkb_cb_list);
spin_unlock(&proc->asts_spin);
/* removes ref for proc->asts, may cause lkb to be freed */
dlm_put_lkb(lkb);
WARN_ON_ONCE(1);
goto try_another;
case DLM_DEQUEUE_CALLBACK_LAST:
list_del_init(&lkb->lkb_cb_list);
2023-03-07 04:48:08 +08:00
clear_bit(DLM_IFL_CB_PENDING_BIT, &lkb->lkb_iflags);
break;
case DLM_DEQUEUE_CALLBACK_SUCCESS:
break;
default:
WARN_ON_ONCE(1);
break;
}
spin_unlock(&proc->asts_spin);
if (cb->flags & DLM_CB_BAST) {
trace_dlm_bast(lkb->lkb_resource->res_ls, lkb, cb->mode);
} else if (cb->flags & DLM_CB_CAST) {
new_mode = cb->mode;
if (!cb->sb_status && lkb->lkb_lksb->sb_lvbptr &&
dlm_lvb_operations[old_mode + 1][new_mode + 1])
copy_lvb = 1;
lkb->lkb_lksb->sb_status = cb->sb_status;
lkb->lkb_lksb->sb_flags = cb->sb_flags;
trace_dlm_ast(lkb->lkb_resource->res_ls, lkb);
}
rv = copy_result_to_user(lkb->lkb_ua,
test_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags),
cb->flags, cb->mode, copy_lvb, buf, count);
kref_put(&cb->ref, dlm_release_callback);
/* removes ref for proc->asts, may cause lkb to be freed */
if (rv == DLM_DEQUEUE_CALLBACK_LAST)
dlm_put_lkb(lkb);
return rv;
}
static __poll_t device_poll(struct file *file, poll_table *wait)
{
struct dlm_user_proc *proc = file->private_data;
poll_wait(file, &proc->wait, wait);
spin_lock(&proc->asts_spin);
if (!list_empty(&proc->asts)) {
spin_unlock(&proc->asts_spin);
return EPOLLIN | EPOLLRDNORM;
}
spin_unlock(&proc->asts_spin);
return 0;
}
int dlm_user_daemon_available(void)
{
/* dlm_controld hasn't started (or, has started, but not
properly populated configfs) */
if (!dlm_our_nodeid())
return 0;
/* This is to deal with versions of dlm_controld that don't
know about the monitor device. We assume that if the
dlm_controld was started (above), but the monitor device
was never opened, that it's an old version. dlm_controld
should open the monitor device before populating configfs. */
if (dlm_monitor_unused)
return 1;
return atomic_read(&dlm_monitor_opened) ? 1 : 0;
}
static int ctl_device_open(struct inode *inode, struct file *file)
{
file->private_data = NULL;
return 0;
}
static int ctl_device_close(struct inode *inode, struct file *file)
{
return 0;
}
static int monitor_device_open(struct inode *inode, struct file *file)
{
atomic_inc(&dlm_monitor_opened);
dlm_monitor_unused = 0;
return 0;
}
static int monitor_device_close(struct inode *inode, struct file *file)
{
if (atomic_dec_and_test(&dlm_monitor_opened))
dlm_stop_lockspaces();
return 0;
}
static const struct file_operations device_fops = {
.open = device_open,
.release = device_close,
.read = device_read,
.write = device_write,
.poll = device_poll,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = noop_llseek,
};
static const struct file_operations ctl_device_fops = {
.open = ctl_device_open,
.release = ctl_device_close,
.read = device_read,
.write = device_write,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = noop_llseek,
};
static struct miscdevice ctl_device = {
.name = "dlm-control",
.fops = &ctl_device_fops,
.minor = MISC_DYNAMIC_MINOR,
};
static const struct file_operations monitor_device_fops = {
.open = monitor_device_open,
.release = monitor_device_close,
.owner = THIS_MODULE,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = noop_llseek,
};
static struct miscdevice monitor_device = {
.name = "dlm-monitor",
.fops = &monitor_device_fops,
.minor = MISC_DYNAMIC_MINOR,
};
int __init dlm_user_init(void)
{
int error;
atomic_set(&dlm_monitor_opened, 0);
error = misc_register(&ctl_device);
if (error) {
log_print("misc_register failed for control device");
goto out;
}
error = misc_register(&monitor_device);
if (error) {
log_print("misc_register failed for monitor device");
misc_deregister(&ctl_device);
}
out:
return error;
}
void dlm_user_exit(void)
{
misc_deregister(&ctl_device);
misc_deregister(&monitor_device);
}