linux/drivers/pci/hotplug/s390_pci_hpc.c

195 lines
3.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* PCI Hot Plug Controller Driver for System z
*
* Copyright 2012 IBM Corp.
*
* Author(s):
* Jan Glauber <jang@linux.vnet.ibm.com>
*/
#define KMSG_COMPONENT "zpci"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <asm/pci_debug.h>
#include <asm/sclp.h>
#define SLOT_NAME_SIZE 10
static LIST_HEAD(s390_hotplug_slot_list);
static int zpci_fn_configured(enum zpci_state state)
{
return state == ZPCI_FN_STATE_CONFIGURED ||
state == ZPCI_FN_STATE_ONLINE;
}
/*
* struct slot - slot information for each *physical* slot
*/
struct slot {
struct list_head slot_list;
struct hotplug_slot *hotplug_slot;
struct zpci_dev *zdev;
};
static inline int slot_configure(struct slot *slot)
{
int ret = sclp_pci_configure(slot->zdev->fid);
zpci_dbg(3, "conf fid:%x, rc:%d\n", slot->zdev->fid, ret);
if (!ret)
slot->zdev->state = ZPCI_FN_STATE_CONFIGURED;
return ret;
}
static inline int slot_deconfigure(struct slot *slot)
{
int ret = sclp_pci_deconfigure(slot->zdev->fid);
zpci_dbg(3, "deconf fid:%x, rc:%d\n", slot->zdev->fid, ret);
if (!ret)
slot->zdev->state = ZPCI_FN_STATE_STANDBY;
return ret;
}
static int enable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
int rc;
if (slot->zdev->state != ZPCI_FN_STATE_STANDBY)
return -EIO;
rc = slot_configure(slot);
if (rc)
return rc;
rc = zpci_enable_device(slot->zdev);
if (rc)
goto out_deconfigure;
pci_scan_slot(slot->zdev->bus, ZPCI_DEVFN);
pci_lock_rescan_remove();
pci_bus_add_devices(slot->zdev->bus);
pci_unlock_rescan_remove();
return rc;
out_deconfigure:
slot_deconfigure(slot);
return rc;
}
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
struct pci_dev *pdev;
int rc;
if (!zpci_fn_configured(slot->zdev->state))
return -EIO;
pdev = pci_get_slot(slot->zdev->bus, ZPCI_DEVFN);
if (pdev) {
pci_stop_and_remove_bus_device_locked(pdev);
pci_dev_put(pdev);
}
rc = zpci_disable_device(slot->zdev);
if (rc)
return rc;
return slot_deconfigure(slot);
}
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
switch (slot->zdev->state) {
case ZPCI_FN_STATE_STANDBY:
*value = 0;
break;
default:
*value = 1;
break;
}
return 0;
}
static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
/* if the slot exits it always contains a function */
*value = 1;
return 0;
}
static const struct hotplug_slot_ops s390_hotplug_slot_ops = {
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.get_power_status = get_power_status,
.get_adapter_status = get_adapter_status,
};
int zpci_init_slot(struct zpci_dev *zdev)
{
struct hotplug_slot *hotplug_slot;
char name[SLOT_NAME_SIZE];
struct slot *slot;
int rc;
if (!zdev)
return 0;
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
if (!slot)
goto error;
hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
if (!hotplug_slot)
goto error_hp;
hotplug_slot->private = slot;
slot->hotplug_slot = hotplug_slot;
slot->zdev = zdev;
hotplug_slot->ops = &s390_hotplug_slot_ops;
snprintf(name, SLOT_NAME_SIZE, "%08x", zdev->fid);
rc = pci_hp_register(slot->hotplug_slot, zdev->bus,
ZPCI_DEVFN, name);
if (rc)
goto error_reg;
list_add(&slot->slot_list, &s390_hotplug_slot_list);
return 0;
error_reg:
kfree(hotplug_slot);
error_hp:
kfree(slot);
error:
return -ENOMEM;
}
void zpci_exit_slot(struct zpci_dev *zdev)
{
struct slot *slot, *next;
list_for_each_entry_safe(slot, next, &s390_hotplug_slot_list,
slot_list) {
if (slot->zdev != zdev)
continue;
list_del(&slot->slot_list);
pci_hp_deregister(slot->hotplug_slot);
PCI: hotplug: Demidlayer registration with the core When a hotplug driver calls pci_hp_register(), all steps necessary for registration are carried out in one go, including creation of a kobject and addition to sysfs. That's a problem for pciehp once it's converted to enable/disable the slot exclusively from the IRQ thread: The thread needs to be spawned after creation of the kobject (because it uses the kobject's name), but before addition to sysfs (because it will handle enable/disable requests submitted via sysfs). pci_hp_deregister() does offer a ->release callback that's invoked after deletion from sysfs and before destruction of the kobject. But because pci_hp_register() doesn't offer a counterpart, hotplug drivers' ->probe and ->remove code becomes asymmetric, which is error prone as recently discovered use-after-free bugs in pciehp's ->remove hook have shown. In a sense, this appears to be a case of the midlayer antipattern: "The core thesis of the "midlayer mistake" is that midlayers are bad and should not exist. That common functionality which it is so tempting to put in a midlayer should instead be provided as library routines which can [be] used, augmented, or ignored by each bottom level driver independently. Thus every subsystem that supports multiple implementations (or drivers) should provide a very thin top layer which calls directly into the bottom layer drivers, and a rich library of support code that eases the implementation of those drivers. This library is available to, but not forced upon, those drivers." -- Neil Brown (2009), https://lwn.net/Articles/336262/ The presence of midlayer traits in the PCI hotplug core might be ascribed to its age: When it was introduced in February 2002, the blessings of a library approach might not have been well known: https://git.kernel.org/tglx/history/c/a8a2069f432c For comparison, the driver core does offer split functions for creating a kobject (device_initialize()) and addition to sysfs (device_add()) as an alternative to carrying out everything at once (device_register()). This was introduced in October 2002: https://git.kernel.org/tglx/history/c/8b290eb19962 The odd ->release callback in the PCI hotplug core was added in 2003: https://git.kernel.org/tglx/history/c/69f8d663b595 Clearly, a library approach would not force every hotplug driver to implement a ->release callback, but rather allow the driver to remove the sysfs files, release its data structures and finally destroy the kobject. Alternatively, a driver may choose to remove everything with pci_hp_deregister(), then release its data structures. To this end, offer drivers pci_hp_initialize() and pci_hp_add() as a split-up version of pci_hp_register(). Likewise, offer pci_hp_del() and pci_hp_destroy() as a split-up version of pci_hp_deregister(). Eliminate the ->release callback and move its code into each driver's teardown routine. Declare pci_hp_deregister() void, in keeping with the usual kernel pattern that enablement can fail, but disablement cannot. It only returned an error if the caller passed in a NULL pointer or a slot which has never or is no longer registered or is sharing its name with another slot. Those would be bugs, so WARN about them. Few hotplug drivers actually checked the return value and those that did only printed a useless error message to dmesg. Remove that. For most drivers the conversion was straightforward since it doesn't matter whether the code in the ->release callback is executed before or after destruction of the kobject. But in the case of ibmphp, it was unclear to me whether setting slot_cur->ctrl and slot_cur->bus_on to NULL needs to happen before the kobject is destroyed, so I erred on the side of caution and ensured that the order stays the same. Another nontrivial case is pnv_php, I've found the list and kref logic difficult to understand, however my impression was that it is safe to delete the list element and drop the references until after the kobject is destroyed. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org>
2018-07-20 06:27:43 +08:00
kfree(slot->hotplug_slot);
kfree(slot);
}
}