korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-29 07:04:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
a7b7751aeb
linux/arch/riscv/configs/defconfig

212 lines
4.5 KiB
Plaintext
Raw Normal View History

RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS This patch enables NO_HZ_IDLE (idle dynamic ticks) and HIGH_RES_TIMERS (hrtimers) in RV32 and RV64 defconfigs. Both of the above options are enabled by default for architectures such as x86, ARM, and ARM64. The idle dynamic ticks helps use save power by stopping timer ticks when the system is idle whereas hrtimers is a much improved timer subsystem compared to the old "timer wheel" based system. This patch is tested on SiFive Unleashed board and QEMU Virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-05-15 14:30:39 +08:00
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
RISC-V: defconfigs: Sort CONFIG_BPF_SYSCALL This should have no functional change, it just sorts CONFIG_BPF_SYSCALL the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-20 00:44:04 +08:00
CONFIG_BPF_SYSCALL=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_MEMCG=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_CGROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_CGROUP_BPF=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 13:10:32 +08:00
CONFIG_CHECKPOINT_RESTORE=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
RISC-V: defconfigs: Sort CONFIG_SYSFS_SYSCALL This should have no functional change, it just sorts CONFIG_SYSFS_SYSCALL the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-20 00:44:05 +08:00
# CONFIG_SYSFS_SYSCALL is not set
RISC-V: Enable profiling by default Let us enable profiling by default in RV32 and RV64 defconfigs so that we can use RISC-V PMU drivers on various RISC-V platforms. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-03-24 13:30:20 +08:00
CONFIG_PROFILING=y
RISC-V: defconfigs: Sort CONFIG_SOC_POLARFIRE This should have no functional change, it just sorts CONFIG_SOC_POLARFIRE the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-20 00:44:06 +08:00
CONFIG_SOC_MICROCHIP_POLARFIRE=y
riscv: defconfig: enable SOC_SIFIVE Enable SOC_SIFIVE so the default upstream config is bootable on the SiFive Unleashed Board. And have basic support for future boards based on the same SoC. Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-28 07:27:57 +08:00
CONFIG_SOC_SIFIVE=y
riscv: config: enable SOC_STARFIVE in defconfig SOC_STARFIVE is the odd one out among the (compatible) SOC_FOO options as it is not enabled in the default defconfig. Add it to make catching dt regressions etc easier. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20220617182424.324276-1-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-18 02:24:25 +08:00
CONFIG_SOC_STARFIVE=y
RISC-V: Enable QEMU virt machine support in defconfigs We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-12-03 11:49:34 +08:00
CONFIG_SOC_VIRT=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 13:10:32 +08:00
CONFIG_SMP=y
RISC-V: Enable CPU Hotplug in defconfigs The CPU hotplug support has been tested on QEMU, Spike, and SiFive Unleashed so let's enable it by default in RV32 and RV64 defconfigs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-09 13:46:20 +08:00
CONFIG_HOTPLUG_CPU=y
RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine We enable RISC-V SBI CPU Idle driver for QEMU virt machine to test SBI HSM Supend on QEMU. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-10 13:49:47 +08:00
CONFIG_PM=y
RISC-V: Enable CPU_IDLE drivers We force select CPU_PM and provide asm/cpuidle.h so that we can use CPU IDLE drivers for Linux RISC-V kernel. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <apatel@vetanamicro.com> Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-10 13:49:40 +08:00
CONFIG_CPU_IDLE=y
RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module Let's enable KVM RISC-V in RV64 and RV32 defconfigs as module so that it always built along with the default kernel image. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-17 16:47:05 +08:00
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
riscv: Add jump-label implementation Add jump-label implementation based on the ARM64 version and add CONFIG_JUMP_LABEL=y to the defconfigs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Björn Töpel <bjorn.topel@gmail.com> Tested-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-07-14 15:40:44 +08:00
CONFIG_JUMP_LABEL=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 13:10:32 +08:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_BLK_DEV_THROTTLING=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_XFRM_USER=m
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_INET_ESP=m
CONFIG_NETFILTER=y
CONFIG_BRIDGE_NETFILTER=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_IP_VS=m
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_NFCT=y
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=m
CONFIG_NET_SCHED=y
CONFIG_NET_CLS_CGROUP=m
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_NETLINK_DIAG=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_CGROUP_NET_PRIO=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-05 00:16:16 +08:00
CONFIG_NET_9P=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_NET_9P_VIRTIO=y
RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX} eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci") reorganized the PCI-related Kconfig entries and resulted in a diff in our defconfig. This simply removes the diff. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-24 04:59:17 +08:00
CONFIG_PCI=y
RISC-V: defconfig: Enable Generic PCIE by default Enable generic PCIe by default in the RISC-V defconfig, this allows us to use QEMU's PCIe support out of the box. CONFIG_RAS=y is automatically selected by generic PCIe, so it has been dropped from the defconfig. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Split out PCIE_XILINX and CRYPTO_DEV_VIRTIO] Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-12 08:41:26 +08:00
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_HOST_GENERIC=y
RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX} eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci") reorganized the PCI-related Kconfig entries and resulted in a diff in our defconfig. This simply removes the diff. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-24 04:59:17 +08:00
CONFIG_PCIE_XILINX=y
riscv: defconfig: enable BLK_DEV_NVME NVMe is a non-volatile storage media attached via PCIe. As NVMe has much higher throughput than other block devices like SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME. The HiFive Unmatched is a board providing M.2 slots for NVMe drives. Enable CONFIG_PCIE_FU740. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-12 16:10:26 +08:00
CONFIG_PCIE_FU740=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_DEVTMPFS=y
riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-26 06:05:59 +08:00
CONFIG_DEVTMPFS_MOUNT=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_BLK_DEV_LOOP=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_VIRTIO_BLK=y
riscv: defconfig: enable BLK_DEV_NVME NVMe is a non-volatile storage media attached via PCIe. As NVMe has much higher throughput than other block devices like SATA it is a must have for RISC-V. Enable CONFIG_BLK_DEV_NVME. The HiFive Unmatched is a board providing M.2 slots for NVMe drives. Enable CONFIG_PCIE_FU740. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-12 16:10:26 +08:00
CONFIG_BLK_DEV_NVME=m
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_SCSI_VIRTIO=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_MD=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_THIN_PROVISIONING=m
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_NETDEVICES=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_DUMMY=m
CONFIG_MACVLAN=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_VETH=m
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_VIRTIO_NET=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_MACB=y
CONFIG_E1000E=y
CONFIG_R8169=y
CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_VIRTIO_CONSOLE=y
riscv: defconfig: Update the defconfig Update the defconfig: - Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable VirtIORNG when running on QEMU Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-14 07:32:30 +08:00
CONFIG_HW_RANDOM=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_HW_RANDOM_VIRTIO=y
riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-26 06:05:59 +08:00
CONFIG_SPI=y
CONFIG_SPI_SIFIVE=y
RISC-V: defconfigs: Sort CONFIG_PTP_1588_CLOCK This should have no functional change, it just sorts CONFIG_PTP_1588_CLOCK the same way savedefconfig does. This only touches the rv64 defconfig because rv32_defconfig was already sorted correctly. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-20 00:44:07 +08:00
# CONFIG_PTP_1588_CLOCK is not set
riscv: defconfig: enable gpio support for HiFive Unleashed Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line connected to a gpio, so enable GPIO driver's required to reset the phy. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-10 23:22:12 +08:00
CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
riscv: defconfig: enable DRM_NOUVEAU Both RADEON and NOUVEAU graphics cards are supported on RISC-V. Enabling the one and not the other does not make sense. As typically at most one of RADEON, NOUVEAU, or VIRTIO GPU support will be needed DRM drivers should be compiled as modules. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-10-13 00:46:58 +08:00
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_VIRTIO_GPU=m
RISC-V: defconfigs: Set CONFIG_FB=y, for FB console We have CONFIG_FRAMEBUFFER_CONSOLE=y in the defconfigs, but that depends on CONFIG_FB so it's not actually getting set. I'm assuming most users on real systems want a framebuffer console, so this enables CONFIG_FB to allow that to take effect. Fixes: 33c57c0d3c67 ("RISC-V: Add a basic defconfig") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-20 00:44:02 +08:00
CONFIG_FB=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
RISC-V: defconfigs: Sort CONFIG_MMC This should have no functional change, it just sorts CONFIG_MMC the same way savedefconfig does. This only touches the rv64 defconfig because rv32_defconfig was already sorted correctly. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-20 00:44:08 +08:00
CONFIG_MMC=y
RISC-V: Enable Microchip PolarFire ICICLE SoC Enable Microchip PolarFire ICICLE soc config in defconfig. It allows the default upstream kernel to boot on PolarFire ICICLE board. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Bin Meng <bin.meng@windriver.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-04 04:02:52 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_CADENCE=y
riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-26 06:05:59 +08:00
CONFIG_MMC_SPI=y
RISC-V: Select Goldfish RTC driver for QEMU virt machine We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-12-03 11:49:39 +08:00
CONFIG_RTC_CLASS=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_RPMSG_CHAR=y
RISC-V: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL In the commit 617d32938d1b ("rpmsg: Move the rpmsg control device from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two. By default give everyone who had the old driver enabled the rpmsg_ctrl driver too. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220404090527.582217-1-arnaud.pouliquen@foss.st.com Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-04-04 17:05:27 +08:00
CONFIG_RPMSG_CTRL=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_RPMSG_VIRTIO=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_EXT4_FS_SECURITY=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_AUTOFS4_FS=y
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_OVERLAY_FS=m
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
riscv: defconfig: enable hugetlbfs option Enabling hugetlbfs in the defconfigs to allow tuning KVM guest performance using huge pages. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-04 23:23:47 +08:00
CONFIG_HUGETLBFS=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_ROOT_NFS=y
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig This patch enables more VIRTIO drivers (such as console, rpmsg, 9p, rng, etc.) which are usable on KVM RISC-V Guest and Xvisor RISC-V Guest. Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alexander Graf <graf@amazon.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-05 00:16:16 +08:00
CONFIG_9P_FS=y
riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 The EFI system partition uses the FAT file system. Many distributions add an entry in /etc/fstab for the ESP. We must ensure that mounting does not fail. The default code page for FAT is 437 (cf. CONFIG_FAT_DEFAULT_CODEPAGE). The default IO character set is "iso8859-1" (cf. CONFIG_NLS_ISO8859_1). So let's enable NLS_CODEPAGE_437 and NLS_ISO8859_1 in defconfig. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-08-12 16:10:27 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=m
riscv: enable Docker requirements in defconfig The defconfig kernel should be able to run Docker. Enable the missing settings according to [1]. make savedefconfig eliminates CONFIG_STACKTRACE which is enabled by default. Many of the settings are also needed to run a defconfig kernel on default distro installations or to run snaps. [1] https://github.com/moby/moby/blob/master/contrib/check-config.sh Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220608000251.55271-1-heinrich.schuchardt@canonical.com [Palmer: Drop BLK_CGROUP, as it's causing panics with KASAN] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-08 08:02:51 +08:00
CONFIG_SECURITY=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_DEFAULT_SECURITY_DAC=y
RISC-V: Add a basic defconfig This patch provides a basic defconfig for the RISC-V architecture that enables enough kernel features to run a basic Linux distribution on qemu's "virt" board for native software development. Features include: - serial console - virtio block and network device support - VFAT and ext2/3/4 filesystem support - NFS client and NFS rootfs support - an assortment of other kernel features required for running systemd It also enables a number of drivers for physical hardware that target the "SiFive U500" SoC and the corresponding development platform. These include: - PCIe host controller support for the FPGA-based U500 development platform (PCIE_XILINX) - USB host controller support (OHCI/EHCI/XHCI) - USB HID (keyboard/mouse) support - USB mass storage support (bulk and UAS) - SATA support (AHCI) - ethernet drivers (MACB for a SoC-internal MAC block, microsemi ethernet phy, E1000E and R8169 for PCIe-connected external devices) - DRM and framebuffer console support for PCIe-connected Radeon graphics chips Signed-off-by: Karsten Merker <merker@debian.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-05 06:37:02 +08:00
CONFIG_CRYPTO_USER_API_HASH=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_CRYPTO_DEV_VIRTIO=y
RISC-V: defconfig: Enable printk timestamps The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 13:10:33 +08:00
CONFIG_PRINTK_TIME=y
riscv: defconfigs: enable debugfs debugfs is broadly useful, so enable it in the RISC-V defconfigs. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-07-19 06:30:04 +08:00
CONFIG_DEBUG_FS=y
riscv: defconfigs: enable more debugging options Enable more debugging options in the RISC-V defconfigs to help kernel developers catch problems with patches earlier in the development cycle. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22 10:24:26 +08:00
CONFIG_DEBUG_PAGEALLOC=y
RISC-V: Only select essential drivers for SOC_VIRT config The kconfig select causes build failues for SOC_VIRT config becaus we are selecting lot of VIRTIO drivers without selecting all required dependencies. Better approach is to only select essential drivers from SOC_VIRT config option and enable required VIRTIO drivers using defconfigs. Fixes: 759bdc168181 ("RISC-V: Add kconfig option for QEMU virt machine") Signed-off-by: Anup Patel <anup.patel@wdc.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-10 19:59:25 +08:00
CONFIG_SCHED_STACK_END_CHECK=y
riscv: defconfigs: enable more debugging options Enable more debugging options in the RISC-V defconfigs to help kernel developers catch problems with patches earlier in the development cycle. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22 10:24:26 +08:00
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
RISC-V: refresh defconfig This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-01 13:10:32 +08:00
# CONFIG_RCU_TRACE is not set
riscv: defconfigs: enable more debugging options Enable more debugging options in the RISC-V defconfigs to help kernel developers catch problems with patches earlier in the development cycle. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-22 10:24:26 +08:00
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
Reference in New Issue Copy Permalink