korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-03 00:54:09 +08:00
Code Issues Packages Projects Releases Wiki Activity
a5a23ad52d
linux/drivers/net/bonding/bond_main.c

4806 lines
133 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* originally based on the dummy device.
*
* Copyright 1999, Thomas Davis, tadavis@lbl.gov.
* Licensed under the GPL. Based on dummy.c, and eql.c devices.
*
* bonding.c: an Ethernet Bonding driver
*
* This is useful to talk to a Cisco EtherChannel compatible equipment:
* Cisco 5500
* Sun Trunking (Solaris)
* Alteon AceDirector Trunks
* Linux Bonding
* and probably many L2 switches ...
*
* How it works:
* ifconfig bond0 ipaddress netmask up
* will setup a network device, with an ip address. No mac address
* will be assigned at this time. The hw mac address will come from
* the first slave bonded to the channel. All slaves will then use
* this hw mac address.
*
* ifconfig bond0 down
* will release all slaves, marking them as down.
*
* ifenslave bond0 eth0
* will attach eth0 to bond0 as a slave. eth0 hw mac address will either
* a: be used as initial mac address
* b: if a hw mac address already is there, eth0's hw mac address
* will then be set from bond0.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
#include <net/ip.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/ip.h>
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
#include <linux/tcp.h>
#include <linux/udp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/socket.h>
#include <linux/ctype.h>
#include <linux/inet.h>
#include <linux/bitops.h>
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
#include <linux/io.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/dma.h>
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
bonding: Improve IGMP join processing In active-backup mode, the current bonding code duplicates IGMP traffic to all slaves, so that switches are up to date in case of a failover from an active to a backup interface. If bonding then fails back to the original active interface, it is likely that the "active slave" switch's IGMP forwarding for the port will be out of date until some event occurs to refresh the switch (e.g., a membership query). This patch alters the behavior of bonding to no longer flood IGMP to all ports, and to issue IGMP JOINs to the newly active port at the time of a failover. This insures that switches are kept up to date for all cases. "GOELLESCH Niels" <niels.goellesch@eurocontrol.int> originally reported this problem, and included a patch. His original patch was modified by Jay Vosburgh to additionally remove the existing IGMP flood behavior, use RCU, streamline code paths, fix trailing white space, and adjust for style. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01 09:03:37 +08:00
#include <linux/igmp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/rtnetlink.h>
#include <linux/smp.h>
#include <linux/if_ether.h>
#include <net/arp.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/if_bonding.h>
bonding: Fix time comparison From: David Sterba <dsterba@suse.cz> Use macros for comparing jiffies. Jiffies' wrap caused missed events and hangs. Module reinsert was needed to make bonding work again. Signed-off-by: David Sterba <dsterba@suse.cz> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:40:33 +08:00
#include <linux/jiffies.h>
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
#include <linux/preempt.h>
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
#include <net/route.h>
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 18:01:34 +08:00
#include <net/net_namespace.h>
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
#include <net/netns/generic.h>
bonding: Fix corrupted queue_mapping In the transmit path of the bonding driver, skb->cb is used to stash the skb->queue_mapping so that the bonding device can set its own queue mapping. This value becomes corrupted since the skb->cb is also used in __dev_xmit_skb. When transmitting through bonding driver, bond_select_queue is called from dev_queue_xmit. In bond_select_queue the original skb->queue_mapping is copied into skb->cb (via bond_queue_mapping) and skb->queue_mapping is overwritten with the bond driver queue. Subsequently in dev_queue_xmit, __dev_xmit_skb is called which writes the packet length into skb->cb, thereby overwriting the stashed queue mappping. In bond_dev_queue_xmit (called from hard_start_xmit), the queue mapping for the skb is set to the stashed value which is now the skb length and hence is an invalid queue for the slave device. If we want to save skb->queue_mapping into skb->cb[], best place is to add a field in struct qdisc_skb_cb, to make sure it wont conflict with other layers (eg : Qdiscc, Infiniband...) This patchs also makes sure (struct qdisc_skb_cb)->data is aligned on 8 bytes : netem qdisc for example assumes it can store an u64 in it, without misalignment penalty. Note : we only have 20 bytes left in (struct qdisc_skb_cb)->data[]. The largest user is CHOKe and it fills it. Based on a previous patch from Tom Herbert. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Tom Herbert <therbert@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Roland Dreier <roland@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 14:03:51 +08:00
#include <net/pkt_sched.h>
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
#include <linux/rculist.h>
net: change name of flow_dissector header to match the .c file name add couple of empty lines on the way. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 20:56:07 +08:00
#include <net/flow_dissector.h>
bonding: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ndo_bridge_setlink/dellink handlers We want bond to pick up the offload flag if any of its slaves have it. NETIF_F_HW_SWITCH_OFFLOAD flag is added to the mask, so that netdev_increment_features does not ignore it. This also adds ndo_bridge_setlink and ndo_bridge_dellink handlers. These currently point to the default handlers provided by the switchdev api. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:16 +08:00
#include <net/switchdev.h>
net: Move bonding headers under include/net This ways drivers like cxgb4 don't need to do ugly relative includes. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11 02:27:49 +08:00
#include <net/bonding.h>
#include <net/bond_3ad.h>
#include <net/bond_alb.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net/bonding: Make DRV macros private The bonding modules currently defines four macros with general names that pollute the global namespace: DRV_VERSION DRV_RELDATE DRV_NAME DRV_DESCRIPTION Fixing that by defining a private bonding_priv.h header files which includes those defines. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-26 20:55:57 +08:00
#include "bonding_priv.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*---------------------------- Module parameters ----------------------------*/
/* monitor all links that often (in milliseconds). <=0 disables monitoring */
static int max_bonds = BOND_DEFAULT_MAX_BONDS;
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
static int tx_queues = BOND_DEFAULT_TX_QUEUES;
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
static int num_peer_notif = 1;
bonding: convert miimon to use the new option API This patch adds the necessary changes so miimon would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:31 +08:00
static int miimon;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static int updelay;
static int downdelay;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int use_carrier = 1;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static char *mode;
static char *primary;
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
static char *primary_reselect;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static char *lacp_rate;
bonding: add min links parameter to 802.3ad This adds support for a configuring the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. See: http://bugzilla.vyatta.com/show_bug.cgi?id=7196 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22 17:54:39 +08:00
static int min_links;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static char *ad_select;
static char *xmit_hash_policy;
bonding: convert arp_interval to use the new option API This patch adds the necessary changes so arp_interval would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:23 +08:00
static int arp_interval;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
static char *arp_validate;
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
static char *arp_all_targets;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static char *fail_over_mac;
bonding: Fixed up a error "do not initialise statics to 0 or NULL" in bond_main.c The error is found by the checkpatch.pl tools. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 15:25:47 +08:00
static int all_slaves_active;
bonding: bond_create always called with default parameters bond_create() is always called with same parameters so move the argument down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:44 +08:00
static struct bond_params bonding_defaults;
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
static int resend_igmp = BOND_DEFAULT_RESEND_IGMP;
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
static int packets_per_slave = 1;
bonding: add option lp_interval for loading module The bond driver could set the lp_interval when loading module. Suggested-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21 14:40:12 +08:00
static int lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
module_param(tx_queues, int, 0);
MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
module_param_named(num_grat_arp, num_peer_notif, int, 0644);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
"failover event (alias of num_unsol_na)");
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
module_param_named(num_unsol_na, num_peer_notif, int, 0644);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
"failover event (alias of num_grat_arp)");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(miimon, int, 0);
MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
[PATCH] bonding: expand module param descriptions Expand and correct the parameter descriptions shown by modinfo. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:35:03 +08:00
MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
"in milliseconds");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(use_carrier, int, 0);
[PATCH] bonding: expand module param descriptions Expand and correct the parameter descriptions shown by modinfo. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:35:03 +08:00
MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
"0 for off, 1 for on (default)");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(mode, charp, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
[PATCH] bonding: expand module param descriptions Expand and correct the parameter descriptions shown by modinfo. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:35:03 +08:00
"1 for active-backup, 2 for balance-xor, "
"3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
"6 for balance-alb");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
module_param(primary_reselect, charp, 0);
MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
"once it comes up; "
"0 for always (default), "
"1 for only if speed of primary is "
"better, "
"2 for only on active slave "
"failure");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(lacp_rate, charp, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
"0 for slow, 1 for fast");
bonding: alternate agg selection policies for 802.3ad This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-05 09:51:16 +08:00
module_param(ad_select, charp, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; "
"0 for stable (default), 1 for bandwidth, "
"2 for count");
bonding: add min links parameter to 802.3ad This adds support for a configuring the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. See: http://bugzilla.vyatta.com/show_bug.cgi?id=7196 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22 17:54:39 +08:00
module_param(min_links, int, 0);
MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier");
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
module_param(xmit_hash_policy, charp, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; "
"0 for layer 2 (default), 1 for layer 3+4, "
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
"2 for layer 2+3, 3 for encap layer 2+3, "
"4 for encap layer 3+4");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
module_param(arp_validate, charp, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
"0 for none (default), 1 for active, "
"2 for backup, 3 for all");
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
module_param(arp_all_targets, charp, 0);
MODULE_PARM_DESC(arp_all_targets, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
module_param(fail_over_mac, charp, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
"the same MAC; 0 for none (default), "
"1 for active, 2 for follow");
bonding: add all_slaves_active parameter v2: changed parameter name from 'keep_all' to 'all_slaves_active' and skipped setting slaves to inactive rather than creating a new flag at Jay's suggestion. In an effort to suppress duplicate frames on certain bonding modes (specifically the modes that do not require additional configuration on the switch or switches connected to the host), code was added in the generic receive patch in 2.6.16. The current behavior works quite well for most users, but there are some times it would be nice to restore old functionality and allow all frames to make their way up the stack. This patch adds support for a new module option and sysfs file called 'all_slaves_active' that will restore pre-2.6.16 functionality if the user desires. The default value is '0' and retains existing behavior, but the user can set it to '1' and allow all frames up if desired. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:39:21 +08:00
module_param(all_slaves_active, int, 0);
net:bonding: Add missing space in bonding driver parameter description This patch adds missing space between "interface" and "by" in bonding module parameter description. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09 17:07:55 +08:00
MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface "
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
"by setting active flag for all slaves; "
bonding: add all_slaves_active parameter v2: changed parameter name from 'keep_all' to 'all_slaves_active' and skipped setting slaves to inactive rather than creating a new flag at Jay's suggestion. In an effort to suppress duplicate frames on certain bonding modes (specifically the modes that do not require additional configuration on the switch or switches connected to the host), code was added in the generic receive patch in 2.6.16. The current behavior works quite well for most users, but there are some times it would be nice to restore old functionality and allow all frames to make their way up the stack. This patch adds support for a new module option and sysfs file called 'all_slaves_active' that will restore pre-2.6.16 functionality if the user desires. The default value is '0' and retains existing behavior, but the user can set it to '1' and allow all frames up if desired. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:39:21 +08:00
"0 for never (default), 1 for always.");
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
module_param(resend_igmp, int, 0);
bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 12:41:59 +08:00
MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
"link failure");
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
module_param(packets_per_slave, int, 0);
MODULE_PARM_DESC(packets_per_slave, "Packets to send per slave in balance-rr "
"mode; 0 for a random slave, 1 packet per "
"slave (default), >1 packets per slave.");
bonding: add option lp_interval for loading module The bond driver could set the lp_interval when loading module. Suggested-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21 14:40:12 +08:00
module_param(lp_interval, uint, 0);
MODULE_PARM_DESC(lp_interval, "The number of seconds between instances where "
"the bonding driver sends learning packets to "
"each slaves peer switch. The default is 1.");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*----------------------------- Global variables ----------------------------*/
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
net: Convert netpoll blocking api in bonding driver to be a counter A while back I made some changes to enable netpoll in the bonding driver. Among them was a per-cpu flag that indicated we were in a path that held locks which could cause the netpoll path to block in during tx, and as such the tx path should queue the frame for later use. This appears to have given rise to a regression. If one of those paths on which we hold the per-cpu flag yields the cpu, its possible for us to come back on a different cpu, leading to us clearing a different flag than we set. This results in odd netpoll drops, and BUG backtraces appearing in the log, as we check to make sure that we only clear set bits, and only set clear bits. I had though briefly about changing the offending paths so that they wouldn't sleep, but looking at my origional work more closely, it doesn't appear that a per-cpu flag is warranted. We alrady gate the checking of this flag on IFF_IN_NETPOLL, so we don't hit this in the normal tx case anyway. And practically speaking, the normal use case for netpoll is to only have one client anyway, so we're not going to erroneously queue netpoll frames when its actually safe to do so. As such, lets just convert that per-cpu flag to an atomic counter. It fixes the rescheduling bugs, is equivalent from a performance perspective and actually eliminates some code in the process. Tested by the reporter and myself, successfully Reported-by: Liang Zheng <lzheng@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06 17:05:50 +08:00
atomic_t netpoll_block_tx = ATOMIC_INIT(0);
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
#endif
netns: net_identifiers should be read_mostly Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17 18:42:49 +08:00
int bond_net_id __read_mostly;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static __be32 arp_target[BOND_MAX_ARP_TARGETS];
static int arp_ip_count;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_mode = BOND_MODE_ROUNDROBIN;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
static int lacp_fast;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------- Forward declarations ---------------------------*/
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
static int bond_init(struct net_device *bond_dev);
bond: Simplify bond device destruction Manually inline the code from bond_deinit to bond_uninit. bond_uninit is the only caller and it is short. Move the call of bond_release_all from the netdev notifier into bond_uninit. The call site is effectively the same and performing the call explicitly allows all the paths for destroying a bonding device to behave the same way. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:24 +08:00
static void bond_uninit(struct net_device *bond_dev);
bonding: make global bonding stats more reliable As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29 10:34:37 +08:00
static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
struct rtnl_link_stats64 *stats);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
static void bond_slave_arr_handler(struct work_struct *work);
bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-03 05:35:56 +08:00
static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
int mod);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*---------------------------- General routines -----------------------------*/
bonding: move procfs code into bond_procfs.c V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David. bond_main.c is bloating, separate the procfs code out, move them to bond_procfs.c Signed-off-by: WANG Cong <amwang@redhat.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07 05:58:46 +08:00
const char *bond_mode_name(int mode)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: use table for mode names Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:08:09 +08:00
static const char *names[] = {
[BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
[BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
[BOND_MODE_XOR] = "load balancing (xor)",
[BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
[BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
bonding: use table for mode names Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:08:09 +08:00
[BOND_MODE_TLB] = "transmit load balancing",
[BOND_MODE_ALB] = "adaptive load balancing",
};
bonding: use pre-defined macro in bond_mode_name instead of magic number 0 We have BOND_MODE_ROUNDROBIN pre-defined as 0, and it's the lowest mode number. Use it to check the arg lower bound instead of magic number 0 in bond_mode_name. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24 14:53:26 +08:00
if (mode < BOND_MODE_ROUNDROBIN || mode > BOND_MODE_ALB)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return "unknown";
bonding: use table for mode names Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:08:09 +08:00
return names[mode];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*---------------------------------- VLAN -----------------------------------*/
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* @bond: bond device that got this skb for tx.
* @skb: hw accel VLAN tagged skb to transmit
* @slave_dev: slave that is supposed to xmit this skbuff
*/
bonding: remove unwanted return value for bond_dev_queue_xmit() The return value for bond_dev_queue_xmit() will not be used anymore, so remove the return value. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02 09:13:09 +08:00
void bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
struct net_device *slave_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding/vlan: Remove redundant VLAN tag insertion logic A bond may have a mixture of slave devices with and without hardware VLAN tag insertion capability. Therefore it always claims this capability and performs software VLAN tag insertion if the slave does not. Since commit 7b9c60903714bf0a19d746b228864bad3497284e, this has also been done by dev_hard_start_xmit(). The result is that VLAN- tagged skbs are now double-tagged when transmitted through slave devices without hardware VLAN tag insertion! Remove the now-redundant logic from bond_dev_queue_xmit(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13 16:19:28 +08:00
skb->dev = slave_dev;
bonding: reset queue mapping prior to transmission to physical device (v5) The bonding driver is multiqueue enabled, in which each queue represents a slave to enable optional steering of output frames to given slaves against the default output policy. However, it needs to reset the skb->queue_mapping prior to queuing to the physical device or the physical slave (if it is multiqueue) could wind up transmitting on an unintended tx queue Change Notes: v2) Based on first pass review, updated the patch to restore the origional queue mapping that was found in bond_select_queue, rather than simply resetting to zero. This preserves the value of queue_mapping when it was set on receive in the forwarding case which is desireable. v3) Fixed spelling an casting error in skb->cb v4) fixed to store raw queue_mapping to avoid double decrement v5) Eric D requested that ->cb access be wrapped in a macro. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-03 18:35:52 +08:00
bonding: Fix corrupted queue_mapping In the transmit path of the bonding driver, skb->cb is used to stash the skb->queue_mapping so that the bonding device can set its own queue mapping. This value becomes corrupted since the skb->cb is also used in __dev_xmit_skb. When transmitting through bonding driver, bond_select_queue is called from dev_queue_xmit. In bond_select_queue the original skb->queue_mapping is copied into skb->cb (via bond_queue_mapping) and skb->queue_mapping is overwritten with the bond driver queue. Subsequently in dev_queue_xmit, __dev_xmit_skb is called which writes the packet length into skb->cb, thereby overwriting the stashed queue mappping. In bond_dev_queue_xmit (called from hard_start_xmit), the queue mapping for the skb is set to the stashed value which is now the skb length and hence is an invalid queue for the slave device. If we want to save skb->queue_mapping into skb->cb[], best place is to add a field in struct qdisc_skb_cb, to make sure it wont conflict with other layers (eg : Qdiscc, Infiniband...) This patchs also makes sure (struct qdisc_skb_cb)->data is aligned on 8 bytes : netem qdisc for example assumes it can store an u64 in it, without misalignment penalty. Note : we only have 20 bytes left in (struct qdisc_skb_cb)->data[]. The largest user is CHOKe and it fills it. Based on a previous patch from Tom Herbert. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Tom Herbert <therbert@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Roland Dreier <roland@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 14:03:51 +08:00
BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
net: rename bond_queue_mapping to slave_dev_queue_mapping As this is going to be used not only by bonding. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 10:28:49 +08:00
sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping));
skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
bonding: reset queue mapping prior to transmission to physical device (v5) The bonding driver is multiqueue enabled, in which each queue represents a slave to enable optional steering of output frames to given slaves against the default output policy. However, it needs to reset the skb->queue_mapping prior to queuing to the physical device or the physical slave (if it is multiqueue) could wind up transmitting on an unintended tx queue Change Notes: v2) Based on first pass review, updated the patch to restore the origional queue mapping that was found in bond_select_queue, rather than simply resetting to zero. This preserves the value of queue_mapping when it was set on receive in the forwarding case which is desireable. v3) Fixed spelling an casting error in skb->cb v4) fixed to store raw queue_mapping to avoid double decrement v5) Eric D requested that ->cb access be wrapped in a macro. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-03 18:35:52 +08:00
netpoll: check netpoll tx status on the right device Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 09:24:45 +08:00
if (unlikely(netpoll_tx_running(bond->dev)))
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
netpoll: remove IFF_IN_NETPOLL flag V4: rebase to net-next-2.6 This patch removes the flag IFF_IN_NETPOLL, we don't need it any more since we have netpoll_tx_running() now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:33 +08:00
else
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
dev_queue_xmit(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
bonding: do vlan cleanup Now when all devices are cleaned up, bond can be cleaned up as well - remove bond->vlgrp - remove bond_vlan_rx_register - substitute necessary occurences of vlan_group_get_device Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 12:54:46 +08:00
* We don't protect the slave list iteration with a lock because:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* a. This operation is performed in IOCTL context,
* b. The operation is protected by the RTNL semaphore in the 8021q code,
* c. Holding a lock with BH disabled while directly calling a base driver
* entry point is generally a BAD idea.
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* The design of synchronization/protection for this operation in the 8021q
* module is good for one or more VLAN devices over a single physical device
* and cannot be extended for a teaming solution like bonding, so there is a
* potential race condition here where a net device from the vlan group might
* be referenced (either by a base driver or the 8021q code) while it is being
* removed from the system. However, it turns out we're not making matters
* worse, and if it works for regular VLAN usage it will work here too.
*/
/**
* bond_vlan_rx_add_vid - Propagates adding an id to slaves
* @bond_dev: bonding net device that got called
* @vid: vlan id being added
*/
net: vlan: prepare for 802.1ad VLAN filtering offload Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 10:04:28 +08:00
static int bond_vlan_rx_add_vid(struct net_device *bond_dev,
__be16 proto, u16 vid)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
struct slave *slave, *rollback_slave;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
int res;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
net: vlan: prepare for 802.1ad VLAN filtering offload Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 10:04:28 +08:00
res = vlan_vid_add(slave->dev, proto, vid);
net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08 12:11:17 +08:00
if (res)
goto unwind;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
net: make vlan ndo_vlan_rx_[add/kill]_vid return error value Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09 08:52:37 +08:00
return 0;
net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08 12:11:17 +08:00
unwind:
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
/* unwind to the slave that failed */
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, rollback_slave, iter) {
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
if (rollback_slave == slave)
break;
vlan_vid_del(rollback_slave->dev, proto, vid);
}
net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08 12:11:17 +08:00
return res;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/**
* bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
* @bond_dev: bonding net device that got called
* @vid: vlan id being removed
*/
net: vlan: prepare for 802.1ad VLAN filtering offload Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 10:04:28 +08:00
static int bond_vlan_rx_kill_vid(struct net_device *bond_dev,
__be16 proto, u16 vid)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct slave *slave;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter)
net: vlan: prepare for 802.1ad VLAN filtering offload Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 10:04:28 +08:00
vlan_vid_del(slave->dev, proto, vid);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: remove vlan_list/current_alb_vlan Currently there are no real users of vlan_list/current_alb_vlan, only the helpers which maintain them, so remove them. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:15 +08:00
if (bond_is_lb(bond))
bond_alb_clear_vlan(bond, vid);
net: make vlan ndo_vlan_rx_[add/kill]_vid return error value Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09 08:52:37 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*------------------------------- Link status -------------------------------*/
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Set the carrier state for the master according to the state of its
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
* slaves. If any slaves are up, the master is up. In 802.3ad mode,
* do special 802.3ad magic.
*
* Returns zero if carrier state does not change, nonzero if it does.
*/
bonding: update bond carrier state when min_links option changes Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 14:16:57 +08:00
int bond_set_carrier(struct bonding *bond)
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
{
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
struct slave *slave;
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (!bond_has_slaves(bond))
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
goto down;
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
return bond_3ad_set_carrier(bond);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
if (slave->link == BOND_LINK_UP) {
if (!netif_carrier_ok(bond->dev)) {
netif_carrier_on(bond->dev);
return 1;
}
return 0;
}
}
down:
if (netif_carrier_ok(bond->dev)) {
netif_carrier_off(bond->dev);
return 1;
}
return 0;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Get link speed and duplex from the slave's base driver
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* using ethtool. If for some reason the call fails or the
bonding:update speed/duplex for NETDEV_CHANGE Zheng Liang(lzheng@redhat.com) found a bug that if we config bonding with arp monitor, sometimes bonding driver cannot get the speed and duplex from its slaves, it will assume them to be 100Mb/sec and Full, please see /proc/net/bonding/bond0. But there is no such problem when uses miimon. (Take igb for example) I find that the reason is that after dev_open() in bond_enslave(), bond_update_speed_duplex() will call igb_get_settings() , but in that function, it runs ethtool_cmd_speed_set(ecmd, -1); ecmd->duplex = -1; because igb get an error value of status. So even dev_open() is called, but the device is not really ready to get its settings. Maybe it is safe for us to call igb_get_settings() only after this message shows up, that is "igb: p4p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX". So I prefer to update the speed and duplex for a slave when reseices NETDEV_CHANGE/NETDEV_UP event. Changelog V2: 1 remove the "fake 100/Full" logic in bond_update_speed_duplex(), set speed and duplex to -1 when it gets error value of speed and duplex. 2 delete the warning in bond_enslave() if bond_update_speed_duplex() returns error. 3 make bond_info_show_slave() handle bad values of speed and duplex. Signed-off-by: Weiping Pan <wpan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-01 01:20:48 +08:00
* values are invalid, set speed and duplex to -1,
bonding: bond_update_speed_duplex() can return void since no callers check its return As none of the callers of bond_update_speed_duplex (need to) check its return value, there is little point in it returning anything. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 19:20:30 +08:00
* and return.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: bond_update_speed_duplex() can return void since no callers check its return As none of the callers of bond_update_speed_duplex (need to) check its return value, there is little point in it returning anything. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 19:20:30 +08:00
static void bond_update_speed_duplex(struct slave *slave)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct net_device *slave_dev = slave->dev;
net: consolidate and fix ethtool_ops->get_settings calling This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-03 11:34:30 +08:00
struct ethtool_cmd ecmd;
net-bonding: Adding support for throughputs larger than 65536 Mbps This updates the bonding driver to support v2.6.27-rc3 enhancements (b11f8d8c aka. "ethtool: Expand ethtool_cmd.speed to 32 bits") which allow to encode the Mbps link speed on 32-bits (Max 4 Pbps) instead of 16 (Max 65536 Mbps). This patch also attempts to compact struct slave by reordering its fields. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 23:22:31 +08:00
u32 slave_speed;
[NET]: ethtool ops are the only way During the transition to the ethtool_ops way of doing things, we supported calling the device's ->do_ioctl method to allow unconverted drivers to continue working. Those days are long behind us, all in-tree drivers use the ethtool_ops way, and so we no longer need to support this. The bonding driver is the biggest beneficiary of this; it no longer needs to call ioctl() as a fallback if ethtool_ops aren't supported. Also put a proper copyright statement on ethtool.c. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-01 05:00:02 +08:00
int res;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: comparing a u8 with -1 is always false slave->duplex is a u8 type so the in bond_info_show_slave() when we check "if (slave->duplex == -1)", it's always false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04 16:21:38 +08:00
slave->speed = SPEED_UNKNOWN;
slave->duplex = DUPLEX_UNKNOWN;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: consolidate and fix ethtool_ops->get_settings calling This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-03 11:34:30 +08:00
res = __ethtool_get_settings(slave_dev, &ecmd);
[NET]: ethtool ops are the only way During the transition to the ethtool_ops way of doing things, we supported calling the device's ->do_ioctl method to allow unconverted drivers to continue working. Those days are long behind us, all in-tree drivers use the ethtool_ops way, and so we no longer need to support this. The bonding driver is the biggest beneficiary of this; it no longer needs to call ioctl() as a fallback if ethtool_ops aren't supported. Also put a proper copyright statement on ethtool.c. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-01 05:00:02 +08:00
if (res < 0)
bonding: bond_update_speed_duplex() can return void since no callers check its return As none of the callers of bond_update_speed_duplex (need to) check its return value, there is little point in it returning anything. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 19:20:30 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: consolidate and fix ethtool_ops->get_settings calling This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-03 11:34:30 +08:00
slave_speed = ethtool_cmd_speed(&ecmd);
bonding: allow all slave speeds No need to check for 10, 100, 1000, 10000 explicitly. Just make this generic and check for invalid values only (similar check is in ethtool userspace app). This enables correct speed handling for slave devices with "nonstandard" speeds. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01 18:36:33 +08:00
if (slave_speed == 0 || slave_speed == ((__u32) -1))
bonding: bond_update_speed_duplex() can return void since no callers check its return As none of the callers of bond_update_speed_duplex (need to) check its return value, there is little point in it returning anything. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 19:20:30 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: consolidate and fix ethtool_ops->get_settings calling This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-03 11:34:30 +08:00
switch (ecmd.duplex) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case DUPLEX_FULL:
case DUPLEX_HALF:
break;
default:
bonding: bond_update_speed_duplex() can return void since no callers check its return As none of the callers of bond_update_speed_duplex (need to) check its return value, there is little point in it returning anything. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 19:20:30 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
net-bonding: Adding support for throughputs larger than 65536 Mbps This updates the bonding driver to support v2.6.27-rc3 enhancements (b11f8d8c aka. "ethtool: Expand ethtool_cmd.speed to 32 bits") which allow to encode the Mbps link speed on 32-bits (Max 4 Pbps) instead of 16 (Max 65536 Mbps). This patch also attempts to compact struct slave by reordering its fields. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 23:22:31 +08:00
slave->speed = slave_speed;
net: consolidate and fix ethtool_ops->get_settings calling This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-03 11:34:30 +08:00
slave->duplex = ecmd.duplex;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: bond_update_speed_duplex() can return void since no callers check its return As none of the callers of bond_update_speed_duplex (need to) check its return value, there is little point in it returning anything. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26 19:20:30 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: add sysfs /slave dir for bond slave devices. Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:57:49 +08:00
const char *bond_slave_link_status(s8 link)
{
switch (link) {
case BOND_LINK_UP:
return "up";
case BOND_LINK_FAIL:
return "going down";
case BOND_LINK_DOWN:
return "down";
case BOND_LINK_BACK:
return "going back";
default:
return "unknown";
}
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* if <dev> supports MII link status reporting, check its link status.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
* depending upon the setting of the use_carrier parameter.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Return either BMSR_LSTATUS, meaning that the link is up (or we
* can't tell and just pretend it is), or 0, meaning that the link is
* down.
*
* If reporting is non-zero, instead of faking link up, return -1 if
* both ETHTOOL and MII ioctls fail (meaning the device does not
* support them). If use_carrier is set, return whatever it says.
* It'd be nice if there was a good way to tell if a driver supports
* netif_carrier, but there really isn't.
*/
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static int bond_check_dev_link(struct bonding *bond,
struct net_device *slave_dev, int reporting)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
bonding: fix a race condition in calls to slave MII ioctls In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 13:23:54 +08:00
int (*ioctl)(struct net_device *, struct ifreq *, int);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ifreq ifr;
struct mii_ioctl_data *mii;
bonding: Have bond_check_dev_link examine netif_running bonding: Have bond_check_dev_link examine netif_running Some network devices do not call netif_carrier_off when they are set administratively down. Have the bonding link check function also inspect the netif_running state. Ignore netif_running if the bond_check_dev_link function is called with "reporting" set, as in that case it's inspecting the capabilities of the non-netif_carrier device driver. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 20:05:15 +08:00
if (!reporting && !netif_running(slave_dev))
return 0;
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
if (bond->params.use_carrier)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
bonding: use ethtool for link checking first This patch only changes the order of interfaces to use for checking slave link status in bond_check_dev_link() to priorize ethtool interface. Should safe some troubles as ethtool seems to be more supported. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 26 ++++++++++++-------------- 1 files changed, 12 insertions(+), 14 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-24 09:58:23 +08:00
/* Try to get link status using Ethtool first. */
bonding: Fix check for ethtool get_link operation support Since commit 2c60db037034 ('net: provide a default dev->ethtool_ops') all devices have a non-null ethtool_ops. Test only dev->ethtool_ops->get_link in both places where we care. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07 14:15:32 +08:00
if (slave_dev->ethtool_ops->get_link)
return slave_dev->ethtool_ops->get_link(slave_dev) ?
BMSR_LSTATUS : 0;
bonding: use ethtool for link checking first This patch only changes the order of interfaces to use for checking slave link status in bond_check_dev_link() to priorize ethtool interface. Should safe some troubles as ethtool seems to be more supported. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 26 ++++++++++++-------------- 1 files changed, 12 insertions(+), 14 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-24 09:58:23 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
/* Ethtool can't be used, fallback to MII ioctls. */
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
ioctl = slave_ops->ndo_do_ioctl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (ioctl) {
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* TODO: set pointer to correct ioctl on a per team member
* bases to make this more efficient. that is, once
* we determine the correct ioctl, we will always
* call it and not the others for that team
* member.
*/
/* We cannot assume that SIOCGMIIPHY will also read a
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* register; not all network drivers (e.g., e100)
* support that.
*/
/* Yes, the mii is overlaid on the ifreq.ifr_ifru */
strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
mii = if_mii(&ifr);
if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
mii->reg_num = MII_BMSR;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
return mii->val_out & BMSR_LSTATUS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* If reporting, report that either there's no dev->do_ioctl,
[NET]: ethtool ops are the only way During the transition to the ethtool_ops way of doing things, we supported calling the device's ->do_ioctl method to allow unconverted drivers to continue working. Those days are long behind us, all in-tree drivers use the ethtool_ops way, and so we no longer need to support this. The bonding driver is the biggest beneficiary of this; it no longer needs to call ioctl() as a fallback if ethtool_ops aren't supported. Also put a proper copyright statement on ethtool.c. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-01 05:00:02 +08:00
* or both SIOCGMIIREG and get_link failed (meaning that we
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* cannot report link status). If not reporting, pretend
* we're ok.
*/
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
return reporting ? -1 : BMSR_LSTATUS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*----------------------------- Multicast list ------------------------------*/
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Push the promiscuity flag down to appropriate slaves */
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
static int bond_set_promiscuity(struct bonding *bond, int inc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
int err = 0;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond)) {
bonding: use rtnl_deref in bond_change_rx_flags() As it's always called with RTNL held, via dev_set_allmulti/promiscuity. Also, remove the wrong comment. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 00:32:01 +08:00
struct slave *curr_active = rtnl_dereference(bond->curr_active_slave);
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (curr_active)
err = dev_set_promiscuity(curr_active->dev, inc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
struct slave *slave;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
err = dev_set_promiscuity(slave->dev, inc);
if (err)
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Push the allmulti flag down to all slaves */
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
static int bond_set_allmulti(struct bonding *bond, int inc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
int err = 0;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond)) {
bonding: use rtnl_deref in bond_change_rx_flags() As it's always called with RTNL held, via dev_set_allmulti/promiscuity. Also, remove the wrong comment. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 00:32:01 +08:00
struct slave *curr_active = rtnl_dereference(bond->curr_active_slave);
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (curr_active)
err = dev_set_allmulti(curr_active->dev, inc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
struct slave *slave;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
err = dev_set_allmulti(slave->dev, inc);
if (err)
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Retrieve the list of registered multicast addresses for the bonding
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
* device and retransmit an IGMP JOIN request to the current active
* slave.
*/
bonding: rebuild the bond_resend_igmp_join_requests_delayed() The bond_resend_igmp_join_requests_delayed() and bond_resend_igmp_join_requests() should be integrated, because the bond_resend_igmp_join_requests_delayed() did nothing except bond_resend_igmp_join_requests(). The bond igmp_retrans could only be changed in bond_change_active_slave and here, bond_change_active_slave will be called in RTNL and curr_slave_lock, the bond_resend_igmp_join_requests already hold RTNL, so no need to free RTNL and hold curr_slave_lock again, it may be a small optimization, so move the igmp_retrans in RTNL and remove the curr_slave_lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:26 +08:00
static void bond_resend_igmp_join_requests_delayed(struct work_struct *work)
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
{
bonding: rebuild the bond_resend_igmp_join_requests_delayed() The bond_resend_igmp_join_requests_delayed() and bond_resend_igmp_join_requests() should be integrated, because the bond_resend_igmp_join_requests_delayed() did nothing except bond_resend_igmp_join_requests(). The bond igmp_retrans could only be changed in bond_change_active_slave and here, bond_change_active_slave will be called in RTNL and curr_slave_lock, the bond_resend_igmp_join_requests already hold RTNL, so no need to free RTNL and hold curr_slave_lock again, it may be a small optimization, so move the igmp_retrans in RTNL and remove the curr_slave_lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:26 +08:00
struct bonding *bond = container_of(work, struct bonding,
mcast_work.work);
net: convert resend IGMP to notifier event Until now, bond_resend_igmp_join_requests() looks for vlans attached to bonding device, bridge where bonding act as port manually. It does not care of other scenarios, like stacked bonds or team device above. Make this more generic and use netdev notifier to propagate the event to upper devices and to actually call ip_mc_rejoin_groups(). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-20 18:13:53 +08:00
if (!rtnl_trylock()) {
bonding: fix system hang due to fast igmp timer rescheduling After commit 4aa5dee4d9 ("net: convert resend IGMP to notifier event") we try to acquire rtnl in bond_resend_igmp_join_requests but it can be scheduled with rtnl already held (e.g. when bond_change_active_slave is called with rtnl) causing a loop of immediate reschedules + calls because rtnl_trylock fails each time since it's being already held. For me this issue leads to system hangs very easy: modprobe bonding; ifconfig bond0 up; ifenslave bond0 eth0; rmmod bonding; The fix is to introduce a small (1 jiffy) delay which is enough for the sections holding rtnl to finish without putting any strain on the system. Also adjust the timer in bond_change_active_slave to be 1 jiffy, since most of the time it's called with rtnl already held. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 17:51:42 +08:00
queue_delayed_work(bond->wq, &bond->mcast_work, 1);
net: convert resend IGMP to notifier event Until now, bond_resend_igmp_join_requests() looks for vlans attached to bonding device, bridge where bonding act as port manually. It does not care of other scenarios, like stacked bonds or team device above. Make this more generic and use netdev notifier to propagate the event to upper devices and to actually call ip_mc_rejoin_groups(). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-20 18:13:53 +08:00
return;
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
}
net: convert resend IGMP to notifier event Until now, bond_resend_igmp_join_requests() looks for vlans attached to bonding device, bridge where bonding act as port manually. It does not care of other scenarios, like stacked bonds or team device above. Make this more generic and use netdev notifier to propagate the event to upper devices and to actually call ip_mc_rejoin_groups(). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-20 18:13:53 +08:00
call_netdevice_notifiers(NETDEV_RESEND_IGMP, bond->dev);
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
bonding: fix igmp_retrans type and two related races First the type of igmp_retrans (which is the actual counter of igmp_resend parameter) is changed to u8 to be able to store values up to 255 (as per documentation). There are two races that were hidden there and which are easy to trigger after the previous fix, the first is between bond_resend_igmp_join_requests and bond_change_active_slave where igmp_retrans is set and can be altered by the periodic. The second race condition is between multiple running instances of the periodic (upon execution it can be scheduled again for immediate execution which can cause the counter to go < 0 which in the unsigned case leads to unnecessary igmp retransmissions). Since in bond_change_active_slave bond->lock is held for reading and curr_slave_lock for writing, we use curr_slave_lock for mutual exclusion. We can't drop them as there're cases where RTNL is not held when bond_change_active_slave is called. RCU is unlocked in bond_resend_igmp_join_requests before getting curr_slave_lock since we don't need it there and it's pointless to delay. The decrement is moved inside the "if" block because if we decrement unconditionally there's still a possibility for a race condition although it is much more difficult to hit (many changes have to happen in a very short period in order to trigger) which in the case of 3 parallel running instances of this function and igmp_retrans == 1 (with check bond->igmp_retrans-- > 1) is: f1 passes, doesn't re-schedule, but decrements - igmp_retrans = 0 f2 then passes, doesn't re-schedule, but decrements - igmp_retrans = 255 f3 does the unnecessary retransmissions. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 06:07:02 +08:00
if (bond->igmp_retrans > 1) {
bond->igmp_retrans--;
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
bonding: fix igmp_retrans type and two related races First the type of igmp_retrans (which is the actual counter of igmp_resend parameter) is changed to u8 to be able to store values up to 255 (as per documentation). There are two races that were hidden there and which are easy to trigger after the previous fix, the first is between bond_resend_igmp_join_requests and bond_change_active_slave where igmp_retrans is set and can be altered by the periodic. The second race condition is between multiple running instances of the periodic (upon execution it can be scheduled again for immediate execution which can cause the counter to go < 0 which in the unsigned case leads to unnecessary igmp retransmissions). Since in bond_change_active_slave bond->lock is held for reading and curr_slave_lock for writing, we use curr_slave_lock for mutual exclusion. We can't drop them as there're cases where RTNL is not held when bond_change_active_slave is called. RCU is unlocked in bond_resend_igmp_join_requests before getting curr_slave_lock since we don't need it there and it's pointless to delay. The decrement is moved inside the "if" block because if we decrement unconditionally there's still a possibility for a race condition although it is much more difficult to hit (many changes have to happen in a very short period in order to trigger) which in the case of 3 parallel running instances of this function and igmp_retrans == 1 (with check bond->igmp_retrans-- > 1) is: f1 passes, doesn't re-schedule, but decrements - igmp_retrans = 0 f2 then passes, doesn't re-schedule, but decrements - igmp_retrans = 255 f3 does the unnecessary retransmissions. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 06:07:02 +08:00
}
bonding: rebuild the bond_resend_igmp_join_requests_delayed() The bond_resend_igmp_join_requests_delayed() and bond_resend_igmp_join_requests() should be integrated, because the bond_resend_igmp_join_requests_delayed() did nothing except bond_resend_igmp_join_requests(). The bond igmp_retrans could only be changed in bond_change_active_slave and here, bond_change_active_slave will be called in RTNL and curr_slave_lock, the bond_resend_igmp_join_requests already hold RTNL, so no need to free RTNL and hold curr_slave_lock again, it may be a small optimization, so move the igmp_retrans in RTNL and remove the curr_slave_lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:26 +08:00
rtnl_unlock();
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Flush bond's hardware addresses from slave */
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
static void bond_hw_addr_flush(struct net_device *bond_dev,
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
struct net_device *slave_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
dev_uc_unsync(slave_dev, bond_dev);
dev_mc_unsync(slave_dev, bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* del lacpdu mc addr from mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 05:22:57 +08:00
dev_mc_del(slave_dev, lacpdu_multicast);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/*--------------------------- Active slave change ---------------------------*/
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
/* Update the hardware address list and promisc/allmulti for the new and
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
* old active slaves (if any). Modes that are not using primary keep all
* slaves up date at all times; only the modes that use primary need to call
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
* this function to swap these settings during a failover.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active,
struct slave *old_active)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (old_active) {
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (bond->dev->flags & IFF_PROMISC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_set_promiscuity(old_active->dev, -1);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (bond->dev->flags & IFF_ALLMULTI)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_set_allmulti(old_active->dev, -1);
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
bond_hw_addr_flush(bond->dev, old_active->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (new_active) {
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
/* FIXME: Signal errors upstream. */
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (bond->dev->flags & IFF_PROMISC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_set_promiscuity(new_active->dev, 1);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (bond->dev->flags & IFF_ALLMULTI)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_set_allmulti(new_active->dev, 1);
bonding: in bond_mc_swap() bond's mc addr list is walked without lock Use netif_addr_lock_bh() to acquire the appropriate lock before walking. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:33:38 +08:00
netif_addr_lock_bh(bond->dev);
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
dev_uc_sync(new_active->dev, bond->dev);
dev_mc_sync(new_active->dev, bond->dev);
bonding: in bond_mc_swap() bond's mc addr list is walked without lock Use netif_addr_lock_bh() to acquire the appropriate lock before walking. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:33:38 +08:00
netif_addr_unlock_bh(bond->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: when cloning a MAC use NET_ADDR_STOLEN A simple semantic change, when a slave's MAC is cloned by the bond master then set addr_assign_type to NET_ADDR_STOLEN instead of NET_ADDR_SET. Also use bond_set_dev_addr() in BOND_FOM_ACTIVE mode to change the bond's MAC address because the assign_type has to be set properly. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 23:13:39 +08:00
/**
* bond_set_dev_addr - clone slave's address to bond
* @bond_dev: bond net device
* @slave_dev: slave net device
*
* Should be called with RTNL held.
*/
static void bond_set_dev_addr(struct net_device *bond_dev,
struct net_device *slave_dev)
{
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "bond_dev=%p slave_dev=%p slave_dev->addr_len=%d\n",
bond_dev, slave_dev, slave_dev->addr_len);
bonding: when cloning a MAC use NET_ADDR_STOLEN A simple semantic change, when a slave's MAC is cloned by the bond master then set addr_assign_type to NET_ADDR_STOLEN instead of NET_ADDR_SET. Also use bond_set_dev_addr() in BOND_FOM_ACTIVE mode to change the bond's MAC address because the assign_type has to be set properly. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 23:13:39 +08:00
memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
bond_dev->addr_assign_type = NET_ADDR_STOLEN;
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev);
}
bonding: correct the MAC address for "follow" fail_over_mac policy The "follow" fail_over_mac policy is useful for multiport devices that either become confused or incur a performance penalty when multiple ports are programmed with the same MAC address, but the same MAC address still may happened by this steps for this policy: 1) echo +eth0 > /sys/class/net/bond0/bonding/slaves bond0 has the same mac address with eth0, it is MAC1. 2) echo +eth1 > /sys/class/net/bond0/bonding/slaves eth1 is backup, eth1 has MAC2. 3) ifconfig eth0 down eth1 became active slave, bond will swap MAC for eth0 and eth1, so eth1 has MAC1, and eth0 has MAC2. 4) ifconfig eth1 down there is no active slave, and eth1 still has MAC1, eth2 has MAC2. 5) ifconfig eth0 up the eth0 became active slave again, the bond set eth0 to MAC1. Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same MAC address, it will break this policy for ACTIVE_BACKUP mode. This patch will fix this problem by finding the old active slave and swap them MAC address before change active slave. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 16:30:02 +08:00
static struct slave *bond_get_old_active(struct bonding *bond,
struct slave *new_active)
{
struct slave *slave;
struct list_head *iter;
bond_for_each_slave(bond, slave, iter) {
if (slave == new_active)
continue;
if (ether_addr_equal(bond->dev->dev_addr, slave->dev->dev_addr))
return slave;
}
return NULL;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* bond_do_fail_over_mac
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
*
* Perform special MAC address swapping for fail_over_mac settings
*
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
* Called with RTNL
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
*/
static void bond_do_fail_over_mac(struct bonding *bond,
struct slave *new_active,
struct slave *old_active)
{
u8 tmp_mac[ETH_ALEN];
struct sockaddr saddr;
int rv;
switch (bond->params.fail_over_mac) {
case BOND_FOM_ACTIVE:
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
if (new_active)
bonding: when cloning a MAC use NET_ADDR_STOLEN A simple semantic change, when a slave's MAC is cloned by the bond master then set addr_assign_type to NET_ADDR_STOLEN instead of NET_ADDR_SET. Also use bond_set_dev_addr() in BOND_FOM_ACTIVE mode to change the bond's MAC address because the assign_type has to be set properly. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 23:13:39 +08:00
bond_set_dev_addr(bond->dev, new_active->dev);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
break;
case BOND_FOM_FOLLOW:
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* if new_active && old_active, swap them
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
* if just old_active, do nothing (going to no active slave)
* if just new_active, set new_active to bond's MAC
*/
if (!new_active)
return;
bonding: correct the MAC address for "follow" fail_over_mac policy The "follow" fail_over_mac policy is useful for multiport devices that either become confused or incur a performance penalty when multiple ports are programmed with the same MAC address, but the same MAC address still may happened by this steps for this policy: 1) echo +eth0 > /sys/class/net/bond0/bonding/slaves bond0 has the same mac address with eth0, it is MAC1. 2) echo +eth1 > /sys/class/net/bond0/bonding/slaves eth1 is backup, eth1 has MAC2. 3) ifconfig eth0 down eth1 became active slave, bond will swap MAC for eth0 and eth1, so eth1 has MAC1, and eth0 has MAC2. 4) ifconfig eth1 down there is no active slave, and eth1 still has MAC1, eth2 has MAC2. 5) ifconfig eth0 up the eth0 became active slave again, the bond set eth0 to MAC1. Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same MAC address, it will break this policy for ACTIVE_BACKUP mode. This patch will fix this problem by finding the old active slave and swap them MAC address before change active slave. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 16:30:02 +08:00
if (!old_active)
old_active = bond_get_old_active(bond, new_active);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
if (old_active) {
bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo, bar) ether_addr_copy is smaller and faster for some architectures. This relies on a stack frame being at least __aligned(2) for one use of an Ethernet address on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:02:17 +08:00
ether_addr_copy(tmp_mac, new_active->dev->dev_addr);
bonding: More use of ether_addr_copy It's smaller and faster for some architectures. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19 01:42:45 +08:00
ether_addr_copy(saddr.sa_data,
old_active->dev->dev_addr);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
saddr.sa_family = new_active->dev->type;
} else {
bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo, bar) ether_addr_copy is smaller and faster for some architectures. This relies on a stack frame being at least __aligned(2) for one use of an Ethernet address on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:02:17 +08:00
ether_addr_copy(saddr.sa_data, bond->dev->dev_addr);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
saddr.sa_family = bond->dev->type;
}
rv = dev_set_mac_address(new_active->dev, &saddr);
if (rv) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond->dev, "Error %d setting MAC of slave %s\n",
-rv, new_active->dev->name);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
goto out;
}
if (!old_active)
goto out;
bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo, bar) ether_addr_copy is smaller and faster for some architectures. This relies on a stack frame being at least __aligned(2) for one use of an Ethernet address on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:02:17 +08:00
ether_addr_copy(saddr.sa_data, tmp_mac);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
saddr.sa_family = old_active->dev->type;
rv = dev_set_mac_address(old_active->dev, &saddr);
if (rv)
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond->dev, "Error %d setting MAC of slave %s\n",
-rv, new_active->dev->name);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
out:
break;
default:
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond->dev, "bond_do_fail_over_mac impossible: bad policy %d\n",
bond->params.fail_over_mac);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
break;
}
}
bonding: "primary_reselect" with "failure" is not working properly When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-07 17:34:50 +08:00
static struct slave *bond_choose_primary_or_current(struct bonding *bond)
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
{
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
struct slave *prim = rtnl_dereference(bond->primary_slave);
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
struct slave *curr = rtnl_dereference(bond->curr_active_slave);
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
bonding: "primary_reselect" with "failure" is not working properly When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-07 17:34:50 +08:00
if (!prim || prim->link != BOND_LINK_UP) {
if (!curr || curr->link != BOND_LINK_UP)
return NULL;
return curr;
}
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
if (bond->force_primary) {
bond->force_primary = false;
bonding: "primary_reselect" with "failure" is not working properly When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-07 17:34:50 +08:00
return prim;
}
if (!curr || curr->link != BOND_LINK_UP)
return prim;
/* At this point, prim and curr are both up */
switch (bond->params.primary_reselect) {
case BOND_PRI_RESELECT_ALWAYS:
return prim;
case BOND_PRI_RESELECT_BETTER:
if (prim->speed < curr->speed)
return curr;
if (prim->speed == curr->speed && prim->duplex <= curr->duplex)
return curr;
return prim;
case BOND_PRI_RESELECT_FAILURE:
return curr;
default:
netdev_err(bond->dev, "impossible primary_reselect %d\n",
bond->params.primary_reselect);
return curr;
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
}
}
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/**
bonding: "primary_reselect" with "failure" is not working properly When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-07 17:34:50 +08:00
* bond_find_best_slave - select the best available slave to be the active one
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* @bond: our bonding struct
*/
static struct slave *bond_find_best_slave(struct bonding *bond)
{
bonding: "primary_reselect" with "failure" is not working properly When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-07 17:34:50 +08:00
struct slave *slave, *bestslave = NULL;
bonding: rework bond_find_best_slave() to use bond_for_each_slave() bond_find_best_slave() does not have to be balanced - i.e. return the slave that is *after* some other slave, but rather return the best slave that suits, except of bond->primary_slave - in which case we just return it if it's suitable. After that we just look through all the slaves and return either first up slave or the slave whose link came back earliest. We also don't care about curr_active_slave lock cause we use it in bond_should_change_active() only and there we take it right away - i.e. it won't go away. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:18 +08:00
struct list_head *iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int mintime = bond->params.updelay;
bonding: "primary_reselect" with "failure" is not working properly When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by: Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-07 17:34:50 +08:00
slave = bond_choose_primary_or_current(bond);
if (slave)
return slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: rework bond_find_best_slave() to use bond_for_each_slave() bond_find_best_slave() does not have to be balanced - i.e. return the slave that is *after* some other slave, but rather return the best slave that suits, except of bond->primary_slave - in which case we just return it if it's suitable. After that we just look through all the slaves and return either first up slave or the slave whose link came back earliest. We also don't care about curr_active_slave lock cause we use it in bond_should_change_active() only and there we take it right away - i.e. it won't go away. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:18 +08:00
bond_for_each_slave(bond, slave, iter) {
if (slave->link == BOND_LINK_UP)
return slave;
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (slave->link == BOND_LINK_BACK && bond_slave_is_up(slave) &&
bonding: rework bond_find_best_slave() to use bond_for_each_slave() bond_find_best_slave() does not have to be balanced - i.e. return the slave that is *after* some other slave, but rather return the best slave that suits, except of bond->primary_slave - in which case we just return it if it's suitable. After that we just look through all the slaves and return either first up slave or the slave whose link came back earliest. We also don't care about curr_active_slave lock cause we use it in bond_should_change_active() only and there we take it right away - i.e. it won't go away. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:18 +08:00
slave->delay < mintime) {
mintime = slave->delay;
bestslave = slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
return bestslave;
}
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
static bool bond_should_notify_peers(struct bonding *bond)
{
bonding: rebuild the lock use for bond_mii_monitor() The bond_mii_monitor() still use bond lock to protect bond slave list, it is no effect, I have 2 way to fix the problem, move the RTNL to the top of the function, or add RCU to protect the bond slave list, according to the Jay Vosburgh's opinion, 10 times one second is a truely big performance loss if use RTNL to protect the whole monitor, so I would take the advice and use RCU to protect the bond slave list. The bond_has_slave() will not protect by anything, there will no things happen if the slave list is be changed, unless the bond was free, but it will not happened before the monitor, the bond will closed before be freed. The peers notify for the bond will calling curr_active_slave, so derefence the slave to make sure we will accessing the same slave if the curr_active_slave changed, as the rcu dereference need in read-side critical sector and bond_change_active_slave() will call it with no RCU hold, so add peer notify in rcu_read_lock which will be nested in monitor. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:39 +08:00
struct slave *slave;
rcu_read_lock();
slave = rcu_dereference(bond->curr_active_slave);
rcu_read_unlock();
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
slave ? slave->dev->name : "NULL");
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
if (!slave || !bond->send_peer_notif ||
bonding: Gratuitous ARP gets dropped when first slave added When the first slave is added (such as during bootup) the first gratuitous ARP gets dropped. We don't see this drop during a failover. The packet gets dropped in qdisc (noop_enqueue). The fix is to delay the sending of gratuitous ARPs till the bond dev's carrier is present. It can also be worked around by setting num_grat_arp to more than 1. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11 22:57:23 +08:00
!netif_carrier_ok(bond->dev) ||
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return false;
return true;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/**
* change_active_interface - change the active slave into the specified one
* @bond: our bonding struct
* @new: the new slave to make the active one
*
* Set the new slave to the bond's settings and unset them on the old
* curr_active_slave.
* Setting include flags, mc-list, promiscuity, allmulti, etc.
*
* If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
* because it is apparently the best available slave we have, even though its
* updelay hasn't timed out yet.
*
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
* Caller must hold RTNL.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[PATCH] bonding: make functions not static The sysfs code needs access these functions, so make them not static, and move the protos to the header file. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:35:51 +08:00
void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
struct slave *old_active;
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
ASSERT_RTNL();
old_active = rtnl_dereference(bond->curr_active_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (old_active == new_active)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
if (new_active) {
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
new_active->last_link_up = jiffies;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (new_active->link == BOND_LINK_BACK) {
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond)) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "making interface %s the new active one %d ms earlier\n",
new_active->dev->name,
(bond->params.updelay - new_active->delay) * bond->params.miimon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
new_active->delay = 0;
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(new_active, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
bonding: add and use bond_is_lb() Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:07:13 +08:00
if (bond_is_lb(bond))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
} else {
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond)) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "making interface %s the new active one\n",
new_active->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
}
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond))
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
bond_hw_addr_swap(bond, new_active, old_active);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: add and use bond_is_lb() Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:07:13 +08:00
if (bond_is_lb(bond)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_alb_handle_active_change(bond, new_active);
[PATCH] bonding: suppress duplicate packets Originally submitted by Kenzo Iwami; his original description is: The current bonding driver receives duplicate packets when broadcast/ multicast packets are sent by other devices or packets are flooded by the switch. In this patch, new flags are added in priv_flags of net_device structure to let the bonding driver discard duplicate packets in dev.c:skb_bond(). Modified by Jay Vosburgh to change a define name, update some comments, rearrange the new skb_bond() for clarity, clear all bonding priv_flags on slave release, and update the driver version. Signed-off-by: Kenzo Iwami <k-iwami@cj.jp.nec.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-22 08:36:44 +08:00
if (old_active)
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(old_active,
BOND_SLAVE_NOTIFY_NOW);
[PATCH] bonding: suppress duplicate packets Originally submitted by Kenzo Iwami; his original description is: The current bonding driver receives duplicate packets when broadcast/ multicast packets are sent by other devices or packets are flooded by the switch. In this patch, new flags are added in priv_flags of net_device structure to let the bonding driver discard duplicate packets in dev.c:skb_bond(). Modified by Jay Vosburgh to change a define name, update some comments, rearrange the new skb_bond() for clarity, clear all bonding priv_flags on slave release, and update the driver version. Signed-off-by: Kenzo Iwami <k-iwami@cj.jp.nec.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-22 08:36:44 +08:00
if (new_active)
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_active_flags(new_active,
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
rcu_assign_pointer(bond->curr_active_slave, new_active);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) {
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (old_active)
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(old_active,
BOND_SLAVE_NOTIFY_NOW);
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
if (new_active) {
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
bool should_notify_peers = false;
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_active_flags(new_active,
BOND_SLAVE_NOTIFY_NOW);
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
bonding: bond_change_active_slave() cleanup under active-backup simplified the code of bond_change_active_slave() such that under active-backup mode there's one "if (new_active)" test and the rest of the code only does extra checks on top of it. This removed an unneeded "if (bond->send_grat_arp > 0)" check and avoid calling bond_send_gratuitous_arp when there's no active slave. Jay Vosburgh made minor coding style changes to the orignal patch. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-14 09:12:01 +08:00
if (bond->params.fail_over_mac)
bond_do_fail_over_mac(bond, new_active,
old_active);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
if (netif_running(bond->dev)) {
bond->send_peer_notif =
bond->params.num_peer_notif;
should_notify_peers =
bond_should_notify_peers(bond);
}
net: remove netdev_bonding_change() I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 06:14:57 +08:00
call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev);
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
if (should_notify_peers)
net: remove netdev_bonding_change() I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 06:14:57 +08:00
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
bond->dev);
bonding: Send more than one gratuitous ARP when slave takes over With IPoIB, reception of gratuitous ARP by neighboring hosts is essential for a successful change of slaves in case of failure. Otherwise, they won't learn about the HW address change and need to wait a long time until the neighboring system gives up and sends an ARP request to learn the new HW address. This patch decreases the chance for a lost of a gratuitous ARP packet by sending it more than once. The number retries is configurable and can be set with a module param. Signed-off-by: Moni Shoua <monis@voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:12 +08:00
}
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
}
bonding: fix broken multicast with round-robin mode Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 22:49:05 +08:00
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
/* resend IGMP joins since active slave has changed or
bonding: documentation and code cleanup for resend_igmp Improves the documentation about how IGMP resend parameter works, fix two missing checks and coding style issues. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 16:38:58 +08:00
* all were sent on curr_active_slave.
* resend only if bond is brought up with the affected
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
* bonding modes and the retransmission is enabled
*/
bonding: documentation and code cleanup for resend_igmp Improves the documentation about how IGMP resend parameter works, fix two missing checks and coding style issues. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-25 16:38:58 +08:00
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
((bond_uses_primary(bond) && new_active) ||
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
BOND_MODE(bond) == BOND_MODE_ROUNDROBIN)) {
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
bond->igmp_retrans = bond->params.resend_igmp;
bonding: fix system hang due to fast igmp timer rescheduling After commit 4aa5dee4d9 ("net: convert resend IGMP to notifier event") we try to acquire rtnl in bond_resend_igmp_join_requests but it can be scheduled with rtnl already held (e.g. when bond_change_active_slave is called with rtnl) causing a loop of immediate reschedules + calls because rtnl_trylock fails each time since it's being already held. For me this issue leads to system hangs very easy: modprobe bonding; ifconfig bond0 up; ifenslave bond0 eth0; rmmod bonding; The fix is to introduce a small (1 jiffy) delay which is enough for the sections holding rtnl to finish without putting any strain on the system. Also adjust the timer in bond_change_active_slave to be 1 jiffy, since most of the time it's called with rtnl already held. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 17:51:42 +08:00
queue_delayed_work(bond->wq, &bond->mcast_work, 1);
bonding: fix broken multicast with round-robin mode Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 22:49:05 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/**
* bond_select_active_slave - select a new active slave, if needed
* @bond: our bonding struct
*
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
* This functions should be called when one of the following occurs:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* - The old curr_active_slave has been released or lost its link.
* - The primary_slave has got its link back.
* - A slave has got its link back and there's no old curr_active_slave.
*
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
* Caller must hold RTNL.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[PATCH] bonding: make functions not static The sysfs code needs access these functions, so make them not static, and move the protos to the header file. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:35:51 +08:00
void bond_select_active_slave(struct bonding *bond)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct slave *best_slave;
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
int rv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: consolidate ASSERT_RTNL()s and remove the unnecessary Consolidate the calls to ASSERT_RTNL() before bond_select_active_slave() inside bond_select_active_slave() itself and remove the ASSERT_RTNL() from bond_hw_addr_swap() as it's not exported and its only caller - bond_change_active_slave() already has an ASSERT_RTNL(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:35 +08:00
ASSERT_RTNL();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
best_slave = bond_find_best_slave(bond);
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
if (best_slave != rtnl_dereference(bond->curr_active_slave)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_change_active_slave(bond, best_slave);
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
rv = bond_set_carrier(bond);
if (!rv)
return;
if (netif_carrier_ok(bond->dev)) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "first active interface up!\n");
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
} else {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "now running without any active interface!\n");
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
static inline int slave_enable_netpoll(struct slave *slave)
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
{
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
struct netpoll *np;
int err = 0;
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
netpoll: Remove gfp parameter from __netpoll_setup The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 06:36:38 +08:00
np = kzalloc(sizeof(*np), GFP_KERNEL);
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
err = -ENOMEM;
if (!np)
goto out;
netpoll: Remove gfp parameter from __netpoll_setup The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 06:36:38 +08:00
err = __netpoll_setup(np, slave->dev);
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
if (err) {
kfree(np);
goto out;
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
}
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
slave->np = np;
out:
return err;
}
static inline void slave_disable_netpoll(struct slave *slave)
{
struct netpoll *np = slave->np;
if (!np)
return;
slave->np = NULL;
netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock __netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is already held. The mechanism is used to asynchronously call __netpoll_cleanup outside of the holding of the rtnl_lock, so as to avoid deadlock. Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the rtnl_lock must be held while calling it. Further, it cannot be held, because rcu callbacks may be issued in softirq contexts, which cannot sleep. Fix this by converting the rcu callback to a work queue that is guaranteed to get scheduled in process context, so that we can hold the rtnl properly while calling __netpoll_cleanup Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Cong Wang <amwang@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11 18:25:30 +08:00
__netpoll_free_async(np);
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
}
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
static void bond_poll_controller(struct net_device *bond_dev)
{
bonding: implement bond_poll_controller() This patches implements the poll_controller support for all bonding driver. If the slaves have poll_controller net_op defined, this implementation calls them. This is mode agnostic implementation and iterates through all slaves (based on mode) and calls respective handler. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05 13:57:52 +08:00
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave = NULL;
struct list_head *iter;
struct ad_info ad_info;
struct netpoll_info *ni;
const struct net_device_ops *ops;
if (BOND_MODE(bond) == BOND_MODE_8023AD)
if (bond_3ad_get_active_agg_info(bond, &ad_info))
return;
bond_for_each_slave_rcu(bond, slave, iter) {
ops = slave->dev->netdev_ops;
if (!bond_slave_is_up(slave) || !ops->ndo_poll_controller)
continue;
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct aggregator *agg =
SLAVE_AD_INFO(slave)->port.aggregator;
if (agg &&
agg->aggregator_identifier != ad_info.aggregator_id)
continue;
}
ni = rcu_dereference_bh(slave->dev->npinfo);
if (down_trylock(&ni->dev_lock))
continue;
ops->ndo_poll_controller(slave->dev);
up(&ni->dev_lock);
}
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
}
bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 15:25:27 +08:00
static void bond_netpoll_cleanup(struct net_device *bond_dev)
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
{
bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 15:25:27 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: Fix bonding drivers improper modification of netpoll structure The bonding driver currently modifies the netpoll structure in its xmit path while sending frames from netpoll. This is racy, as other cpus can access the netpoll structure in parallel. Since the bonding driver points np->dev to a slave device, other cpus can inadvertently attempt to send data directly to slave devices, leading to improper locking with the bonding master, lost frames, and deadlocks. This patch fixes that up. This patch also removes the real_dev pointer from the netpoll structure as that data is really only used by bonding in the poll_controller, and we can emulate its behavior by check each slave for IS_UP. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:49 +08:00
struct slave *slave;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter)
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (bond_slave_is_up(slave))
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
slave_disable_netpoll(slave);
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
}
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
netpoll: Remove gfp parameter from __netpoll_setup The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 06:36:38 +08:00
static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni)
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
{
struct bonding *bond = netdev_priv(dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
struct slave *slave;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
int err = 0;
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
err = slave_enable_netpoll(slave);
if (err) {
bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 15:25:27 +08:00
bond_netpoll_cleanup(dev);
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
break;
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
}
}
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
return err;
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
}
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
#else
static inline int slave_enable_netpoll(struct slave *slave)
{
return 0;
}
static inline void slave_disable_netpoll(struct slave *slave)
{
}
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
static void bond_netpoll_cleanup(struct net_device *bond_dev)
{
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*---------------------------------- IOCTL ----------------------------------*/
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 23:29:55 +08:00
static netdev_features_t bond_fix_features(struct net_device *dev,
bonding: drop read_lock in bond_fix_features We're protected by RTNL so nothing can happen and we can safely drop the read bond->lock. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 19:51:41 +08:00
netdev_features_t features)
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
{
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
struct bonding *bond = netdev_priv(dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 23:29:55 +08:00
netdev_features_t mask;
bonding: drop read_lock in bond_fix_features We're protected by RTNL so nothing can happen and we can safely drop the read bond->lock. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 19:51:41 +08:00
struct slave *slave;
net: Fix disjunct computation of netdev features My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23 16:11:29 +08:00
switchdev: remove NETIF_F_HW_SWITCH_OFFLOAD feature flag Roopa said remove the feature flag for this series and she'll work on bringing it back if needed at a later date. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:07 +08:00
mask = features;
bonding: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ndo_bridge_setlink/dellink handlers We want bond to pick up the offload flag if any of its slaves have it. NETIF_F_HW_SWITCH_OFFLOAD flag is added to the mask, so that netdev_increment_features does not ignore it. This also adds ndo_bridge_setlink and ndo_bridge_dellink handlers. These currently point to the default handlers provided by the switchdev api. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 14:40:16 +08:00
net: Fix disjunct computation of netdev features My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23 16:11:29 +08:00
features &= ~NETIF_F_ONE_FOR_ALL;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
features |= NETIF_F_ALL_FOR_ALL;
[NET]: Share correct feature code between bridging and bonding http://bugzilla.kernel.org/show_bug.cgi?id=8797 shows that the bonding driver may produce bogus combinations of the checksum flags and SG/TSO. For example, if you bond devices with NETIF_F_HW_CSUM and NETIF_F_IP_CSUM you'll end up with a bonding device that has neither flag set. If both have TSO then this produces an illegal combination. The bridge device on the other hand has the correct code to deal with this. In fact, the same code can be used for both. So this patch moves that logic into net/core/dev.c and uses it for both bonding and bridging. In the process I've made small adjustments such as only setting GSO_ROBUST if at least one constituent device supports it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-11 06:47:58 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
net: Fix disjunct computation of netdev features My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23 16:11:29 +08:00
features = netdev_increment_features(features,
slave->dev->features,
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
mask);
}
bonding: allow TSO being set on bonding master In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michał Mirosław <mirqus@gmail.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Maciej Żenczykowski <maze@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-16 15:34:53 +08:00
features = netdev_add_tso_features(features, mask);
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
return features;
}
net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 03:19:43 +08:00
#define BOND_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
net: remove NETIF_F_ALL_TX_OFFLOADS There is no software fallback implemented for SCTP or FCoE checksumming, and so it should not be passed on by software devices like bridge or bonding. For VLAN devices, this is different. First, the driver for underlying device should be prepared to get offloaded packets even when the feature is disabled (especially if it advertises it in vlan_features). Second, devices under VLANs do not get replaced without tearing down the VLAN first. This fixes a mess I accidentally introduced while converting bonding to ndo_fix_features. NETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they are unused as of commit 712ae51afd. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13 22:10:29 +08:00
NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
NETIF_F_HIGHDMA | NETIF_F_LRO)
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 03:19:43 +08:00
#define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
bonding: Advertize vxlan offload features when supported When the underlying device supports TCP offloads for VXLAN/UDP encapulated traffic, we need to reflect that through the hw_enc_features field of the bonding net-device. This will cause the xmit path in the core networking stack to provide bonding with encapsulated GSO frames to offload into the HW etc. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-17 21:11:09 +08:00
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
static void bond_compute_features(struct bonding *bond)
{
net: better IFF_XMIT_DST_RELEASE support Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 09:38:35 +08:00
unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
IFF_XMIT_DST_RELEASE_PERM;
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 23:29:55 +08:00
netdev_features_t vlan_features = BOND_VLAN_FEATURES;
bonding: Advertize vxlan offload features when supported When the underlying device supports TCP offloads for VXLAN/UDP encapulated traffic, we need to reflect that through the hw_enc_features field of the bonding net-device. This will cause the xmit path in the core networking stack to provide bonding with encapsulated GSO frames to offload into the HW etc. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-17 21:11:09 +08:00
netdev_features_t enc_features = BOND_ENC_FEATURES;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct net_device *bond_dev = bond->dev;
struct list_head *iter;
struct slave *slave;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
unsigned short max_hard_header_len = ETH_HLEN;
bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices. Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-21 12:35:03 +08:00
unsigned int gso_max_size = GSO_MAX_SIZE;
u16 gso_max_segs = GSO_MAX_SEGS;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (!bond_has_slaves(bond))
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
goto done;
bonding: fix vlan_features computing bond_compute_features() uses netdev_increment_features() to combine vlan_features of slaves into vlan_features of the bond. As netdev_increment_features() only adds most features and we start with BOND_VLAN_FEATURES, we can end up with features none of the slaves provided. If there is at least one slave, initialize vlan_features only with the flags in NETIF_F_ALL_FOR_ALL. Right now there is none in BOND_VLAN_FEATURES but stating it explicitely will make the code more future proof. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-20 14:29:35 +08:00
vlan_features &= NETIF_F_ALL_FOR_ALL;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: propogate vlan_features to bonding master Propogate the vlan_features of the slave devices to the bonding master device, using the same logic as for regular features. Tested by Or Gerlitz <ogerlitz@voltaire.com>, who also removed the debug logic from the original test patch. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 20:05:12 +08:00
vlan_features = netdev_increment_features(vlan_features,
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
slave->dev->vlan_features, BOND_VLAN_FEATURES);
bonding: Advertize vxlan offload features when supported When the underlying device supports TCP offloads for VXLAN/UDP encapulated traffic, we need to reflect that through the hw_enc_features field of the bonding net-device. This will cause the xmit path in the core networking stack to provide bonding with encapsulated GSO frames to offload into the HW etc. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-17 21:11:09 +08:00
enc_features = netdev_increment_features(enc_features,
slave->dev->hw_enc_features,
BOND_ENC_FEATURES);
bonding: refine IFF_XMIT_DST_RELEASE capability Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability on output net device, avoiding dirtying dst refcount. bonding currently disables IFF_XMIT_DST_RELEASE unconditionally. If all slaves have the IFF_XMIT_DST_RELEASE bit set, then bonding master can also have it in its priv_flags Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 20:19:48 +08:00
dst_release_flag &= slave->dev->priv_flags;
[PATCH] bonding: Handle large hard_header_len The bonding driver fails to adjust its hard_header_len when enslaving interfaces. Whenever an interface with a hard_header_len greater than the ETH_HLEN default is enslaved, the potential for an oops exists, and if the oops happens while responding to an arp request, for example, the system panics. GIANFAR devices may use an extended hard_header for VLAN or hardware checksumming. Enslaving such a device and then transmitting over it causes a kernel panic. Patch modified from submitter's original, but submitter agreed with this patch in private email. Signed-off-by: Mark Huth <mhuth@mvista.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:53:39 +08:00
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices. Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-21 12:35:03 +08:00
gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
[PATCH] bonding: Handle large hard_header_len The bonding driver fails to adjust its hard_header_len when enslaving interfaces. Whenever an interface with a hard_header_len greater than the ETH_HLEN default is enslaved, the potential for an oops exists, and if the oops happens while responding to an arp request, for example, the system panics. GIANFAR devices may use an extended hard_header for VLAN or hardware checksumming. Enslaving such a device and then transmitting over it causes a kernel panic. Patch modified from submitter's original, but submitter agreed with this patch in private email. Signed-off-by: Mark Huth <mhuth@mvista.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:53:39 +08:00
}
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
net: Fix disjunct computation of netdev features My change commit e2a6b85247aacc52d6ba0d9b37a99b8d1a3e0d83 net: Enable TSO if supported by at least one device didn't do what was intended because the netdev_compute_features function was designed for conjunctions. So what happened was that it would simply take the TSO status of the last constituent device. This patch extends it to support both conjunctions and disjunctions under the new name of netdev_increment_features. It also adds a new function netdev_fix_features which does the sanity checking that usually occurs upon registration. This ensures that the computation doesn't result in an illegal combination since this checking is absent when the change is initiated via ethtool. The two users of netdev_compute_features have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23 16:11:29 +08:00
done:
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bond_dev->vlan_features = vlan_features;
bonding: handle more gso types In commit 5a7baa78851b ("bonding: Advertize vxlan offload features when supported"), Or Gerlitz added support conditional vxlan offload. In this patch I also add support for all kind of tunnels, but we allow a bonding device to not require segmentation, as it is always better to make this segmentation at the very last stage, if a particular slave device requires it. Tested: Setup a GRE tunnel, on a physical NIC not having tx-gre-segmentation. Results on bnx2x are even better, as we no longer have to segment in software. ethtool -K bond0 tx-gre-segmentation off super_netperf 50 --google-pacing-rate 30000000 -H 10.7.8.152 -l 15 7538.32 ethtool -K bond0 tx-gre-segmentation on super_netperf 50 --google-pacing-rate 30000000 -H 10.7.8.152 -l 15 10200.5 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 15:27:14 +08:00
bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
[PATCH] bonding: Handle large hard_header_len The bonding driver fails to adjust its hard_header_len when enslaving interfaces. Whenever an interface with a hard_header_len greater than the ETH_HLEN default is enslaved, the potential for an oops exists, and if the oops happens while responding to an arp request, for example, the system panics. GIANFAR devices may use an extended hard_header for VLAN or hardware checksumming. Enslaving such a device and then transmitting over it causes a kernel panic. Patch modified from submitter's original, but submitter agreed with this patch in private email. Signed-off-by: Mark Huth <mhuth@mvista.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:53:39 +08:00
bond_dev->hard_header_len = max_hard_header_len;
bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices. Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-21 12:35:03 +08:00
bond_dev->gso_max_segs = gso_max_segs;
netif_set_gso_max_size(bond_dev, gso_max_size);
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
net: better IFF_XMIT_DST_RELEASE support Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 09:38:35 +08:00
bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
if ((bond_dev->priv_flags & IFF_XMIT_DST_RELEASE_PERM) &&
dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM))
bond_dev->priv_flags |= IFF_XMIT_DST_RELEASE;
bonding: refine IFF_XMIT_DST_RELEASE capability Some workloads greatly benefit of IFF_XMIT_DST_RELEASE capability on output net device, avoiding dirtying dst refcount. bonding currently disables IFF_XMIT_DST_RELEASE unconditionally. If all slaves have the IFF_XMIT_DST_RELEASE bit set, then bonding master can also have it in its priv_flags Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 20:19:48 +08:00
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
netdev_change_features(bond_dev);
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
}
net/bonding: Enable bonding to enslave non ARPHRD_ETHER This patch changes some of the bond netdevice attributes and functions to be that of the active slave for the case of the enslaved device not being of ARPHRD_ETHER type. Basically it overrides those setting done by ether_setup(), which are netdevice **type** dependent and hence might be not appropriate for devices of other types. It also enforces mutual exclusion on bonding slaves from dissimilar ether types, as was concluded over the v1 discussion. IPoIB (see Documentation/infiniband/ipoib.txt) MAC address is made of a 3 bytes IB QP (Queue Pair) number and 16 bytes IB port GID (Global ID) of the port this IPoIB device is bounded to. The QP is a resource created by the IB HW and the GID is an identifier burned into the HCA (i have omitted here some details which are not important for the bonding RFC). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:38 +08:00
static void bond_setup_by_slave(struct net_device *bond_dev,
struct net_device *slave_dev)
{
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
bond_dev->header_ops = slave_dev->header_ops;
net/bonding: Enable bonding to enslave non ARPHRD_ETHER This patch changes some of the bond netdevice attributes and functions to be that of the active slave for the case of the enslaved device not being of ARPHRD_ETHER type. Basically it overrides those setting done by ether_setup(), which are netdevice **type** dependent and hence might be not appropriate for devices of other types. It also enforces mutual exclusion on bonding slaves from dissimilar ether types, as was concluded over the v1 discussion. IPoIB (see Documentation/infiniband/ipoib.txt) MAC address is made of a 3 bytes IB QP (Queue Pair) number and 16 bytes IB port GID (Global ID) of the port this IPoIB device is bounded to. The QP is a resource created by the IB HW and the GID is an identifier burned into the HCA (i have omitted here some details which are not important for the bonding RFC). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:38 +08:00
bond_dev->type = slave_dev->type;
bond_dev->hard_header_len = slave_dev->hard_header_len;
bond_dev->addr_len = slave_dev->addr_len;
memcpy(bond_dev->broadcast, slave_dev->broadcast,
slave_dev->addr_len);
}
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
/* On bonding slaves other than the currently active slave, suppress
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
* duplicates except for alb non-mcast/bcast.
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
*/
static bool bond_should_deliver_exact_match(struct sk_buff *skb,
net: get rid of multiple bond-related netdevice->priv_flags Now when bond-related code is moved from net/core/dev.c into bonding code, multiple priv_flags are not needed anymore. So let them rot. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 16:45:23 +08:00
struct slave *slave,
struct bonding *bond)
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
{
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag Since bond-related code was moved from net/core/dev.c into bonding, IFF_SLAVE_INACTIVE is no longer needed. Replace is with flag "inactive" stored in slave structure Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 16:46:43 +08:00
if (bond_is_slave_inactive(slave)) {
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_ALB &&
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
skb->pkt_type != PACKET_BROADCAST &&
skb->pkt_type != PACKET_MULTICAST)
return false;
return true;
}
return false;
}
net: introduce rx_handler results and logic around that This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:39 +08:00
static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
{
net: introduce rx_handler results and logic around that This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:39 +08:00
struct sk_buff *skb = *pskb;
bonding: register slave pointer for rx_handler Register slave pointer as rx_handler data. That would eventually prevent need to loop over slave devices to find the right slave. Use synchronize_net to ensure that bond_handle_frame does not get slave structure freed when working with that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:35 +08:00
struct slave *slave;
net: get rid of multiple bond-related netdevice->priv_flags Now when bond-related code is moved from net/core/dev.c into bonding code, multiple priv_flags are not needed anymore. So let them rot. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 16:45:23 +08:00
struct bonding *bond;
bonding: remove packet cloning in recv_probe() Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 03:23:07 +08:00
int (*recv_probe)(const struct sk_buff *, struct bonding *,
struct slave *);
bonding: don't increase rx_dropped after processing LACPDUs Since commit 3aba891d, bonding processes LACP frames (802.3ad mode) with bond_handle_frame(). Currently a copy of the skb is made and the original is left to be processed by other rx_handlers and the rest of the network stack by returning RX_HANDLER_ANOTHER. As there is no protocol handler for PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped increased. Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED if bonding has processed the LACP frame. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 09:01:40 +08:00
int ret = RX_HANDLER_ANOTHER;
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
net: introduce rx_handler results and logic around that This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:39 +08:00
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return RX_HANDLER_CONSUMED;
*pskb = skb;
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
bonding: fix rx_handler locking This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 10:38:12 +08:00
slave = bond_slave_get_rcu(skb->dev);
bond = slave->bond;
net: get rid of multiple bond-related netdevice->priv_flags Now when bond-related code is moved from net/core/dev.c into bonding code, multiple priv_flags are not needed anymore. So let them rot. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 16:45:23 +08:00
bonding: use local function pointer of bond->recv_probe in bond_handle_frame The bond->recv_probe is called in bond_handle_frame() when a packet is received, but bond_close() sets it to NULL. So, a panic occurs when both functions work in parallel. Why this happen: After null pointer check of bond->recv_probe, an sk_buff is duplicated and bond->recv_probe is called in bond_handle_frame. So, a panic occurs when bond_close() is called between the check and call of bond->recv_probe. Patch: This patch uses a local function pointer of bond->recv_probe in bond_handle_frame(). So, it can avoid the null pointer dereference. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13 00:04:29 +08:00
recv_probe = ACCESS_ONCE(bond->recv_probe);
if (recv_probe) {
bonding: remove packet cloning in recv_probe() Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 03:23:07 +08:00
ret = recv_probe(skb, bond, slave);
if (ret == RX_HANDLER_CONSUMED) {
consume_skb(skb);
return ret;
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
}
}
net: get rid of multiple bond-related netdevice->priv_flags Now when bond-related code is moved from net/core/dev.c into bonding code, multiple priv_flags are not needed anymore. So let them rot. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 16:45:23 +08:00
if (bond_should_deliver_exact_match(skb, slave, bond)) {
net: introduce rx_handler results and logic around that This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:39 +08:00
return RX_HANDLER_EXACT;
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
}
bonding: fix rx_handler locking This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 10:38:12 +08:00
skb->dev = bond->dev;
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_ALB &&
bonding: fix rx_handler locking This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 10:38:12 +08:00
bond->dev->priv_flags & IFF_BRIDGE_PORT &&
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
skb->pkt_type == PACKET_HOST) {
bonding: COW before overwriting the destination MAC address When there is a ptype handler holding a clone of this skb, whose destination MAC addresse is overwritten, the owner of this handler may get a corrupted packet. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 05:07:14 +08:00
if (unlikely(skb_cow_head(skb,
skb->data - skb_mac_header(skb)))) {
kfree_skb(skb);
net: introduce rx_handler results and logic around that This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:39 +08:00
return RX_HANDLER_CONSUMED;
bonding: COW before overwriting the destination MAC address When there is a ptype handler holding a clone of this skb, whose destination MAC addresse is overwritten, the owner of this handler may get a corrupted packet. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 05:07:14 +08:00
}
bonding: More use of ether_addr_copy It's smaller and faster for some architectures. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19 01:42:45 +08:00
ether_addr_copy(eth_hdr(skb)->h_dest, bond->dev->dev_addr);
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
}
bonding: don't increase rx_dropped after processing LACPDUs Since commit 3aba891d, bonding processes LACP frames (802.3ad mode) with bond_handle_frame(). Currently a copy of the skb is made and the original is left to be processed by other rx_handlers and the rest of the network stack by returning RX_HANDLER_ANOTHER. As there is no protocol handler for PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped increased. Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED if bonding has processed the LACP frame. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 09:01:40 +08:00
return ret;
net: convert bonding to use rx_handler This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23 17:05:42 +08:00
}
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
static enum netdev_lag_tx_type bond_lag_tx_type(struct bonding *bond)
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
{
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
switch (BOND_MODE(bond)) {
case BOND_MODE_ROUNDROBIN:
return NETDEV_LAG_TX_TYPE_ROUNDROBIN;
case BOND_MODE_ACTIVEBACKUP:
return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP;
case BOND_MODE_BROADCAST:
return NETDEV_LAG_TX_TYPE_BROADCAST;
case BOND_MODE_XOR:
case BOND_MODE_8023AD:
return NETDEV_LAG_TX_TYPE_HASH;
default:
return NETDEV_LAG_TX_TYPE_UNKNOWN;
}
}
static int bond_master_upper_dev_link(struct bonding *bond, struct slave *slave)
{
struct netdev_lag_upper_info lag_upper_info;
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
int err;
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
lag_upper_info.tx_type = bond_lag_tx_type(bond);
err = netdev_master_upper_dev_link(slave->dev, bond->dev, slave,
&lag_upper_info);
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
if (err)
return err;
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
rtmsg_ifinfo(RTM_NEWLINK, slave->dev, IFF_SLAVE, GFP_KERNEL);
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
return 0;
}
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
static void bond_upper_dev_unlink(struct bonding *bond, struct slave *slave)
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
{
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
netdev_upper_dev_unlink(slave->dev, bond->dev);
slave->dev->flags &= ~IFF_SLAVE;
rtmsg_ifinfo(RTM_NEWLINK, slave->dev, IFF_SLAVE, GFP_KERNEL);
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
}
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
static struct slave *bond_alloc_slave(struct bonding *bond)
{
struct slave *slave = NULL;
slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
if (!slave)
return NULL;
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info),
GFP_KERNEL);
if (!SLAVE_AD_INFO(slave)) {
kfree(slave);
return NULL;
}
}
return slave;
}
static void bond_free_slave(struct slave *slave)
{
struct bonding *bond = bond_get_bond_by_slave(slave);
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
kfree(SLAVE_AD_INFO(slave));
kfree(slave);
}
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info)
{
info->bond_mode = BOND_MODE(bond);
info->miimon = bond->params.miimon;
info->num_slaves = bond->slave_cnt;
}
static void bond_fill_ifslave(struct slave *slave, struct ifslave *info)
{
strcpy(info->slave_name, slave->dev->name);
info->link = slave->link;
info->state = bond_slave_state(slave);
info->link_failure_count = slave->link_failure_count;
}
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
static void bond_netdev_notify(struct net_device *dev,
struct netdev_bonding_info *info)
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
{
rtnl_lock();
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
netdev_bonding_info_change(dev, info);
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
rtnl_unlock();
}
static void bond_netdev_notify_work(struct work_struct *_work)
{
struct netdev_notify_work *w =
container_of(_work, struct netdev_notify_work, work.work);
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
bond_netdev_notify(w->dev, &w->bonding_info);
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
dev_put(w->dev);
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
kfree(w);
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
}
void bond_queue_slave_event(struct slave *slave)
{
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
struct bonding *bond = slave->bond;
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
struct netdev_notify_work *nnw = kzalloc(sizeof(*nnw), GFP_ATOMIC);
if (!nnw)
return;
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
dev_hold(slave->dev);
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
nnw->dev = slave->dev;
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
bond_fill_ifslave(slave, &nnw->bonding_info.slave);
bond_fill_ifbond(bond, &nnw->bonding_info.master);
INIT_DELAYED_WORK(&nnw->work, bond_netdev_notify_work);
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
net/bonding: Fix potential bad memory access during bonding events When queuing work to send the NETDEV_BONDING_INFO netdev event, it's possible that when the work is executed, the pointer to the slave becomes invalid. This can happen if between queuing the event and the execution of the work, the net-device was un-ensvaled and re-enslaved. Fix that by queuing a work with the data of the slave instead of the slave structure. Fixes: 69e6113343cf ('net/bonding: Notify state change on slaves') Reported-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 17:49:32 +08:00
queue_delayed_work(slave->bond->wq, &nnw->work, 0);
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
}
bonding: implement lower state change propagation Let netdev notifier listeners know about link and slave state change. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:20 +08:00
void bond_lower_state_changed(struct slave *slave)
{
struct netdev_lag_lower_state_info info;
info.link_up = slave->link == BOND_LINK_UP ||
slave->link == BOND_LINK_FAIL;
info.tx_enabled = bond_is_active_slave(slave);
netdev_lower_state_changed(slave->dev, &info);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* enslave device <slave> to bond device <master> */
[PATCH] bonding: make functions not static The sysfs code needs access these functions, so make them not static, and move the protos to the header file. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:35:51 +08:00
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
bonding: remove bond_prev_slave() We don't really need it, and it's really hard to RCUify the list->prev. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:25 +08:00
struct slave *new_slave = NULL, *prev_slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct sockaddr addr;
int link_reporting;
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
int res = 0, i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Fix check for ethtool get_link operation support Since commit 2c60db037034 ('net: provide a default dev->ethtool_ops') all devices have a non-null ethtool_ops. Test only dev->ethtool_ops->get_link in both places where we care. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07 14:15:32 +08:00
if (!bond->params.use_carrier &&
slave_dev->ethtool_ops->get_link == NULL &&
slave_ops->ndo_do_ioctl == NULL) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "no link monitoring support for %s\n",
slave_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* already enslaved */
if (slave_dev->flags & IFF_SLAVE) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Error: Device was already enslaved\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EBUSY;
}
bonding: disallow enslaving a bond to itself Enslaving a bond to itself leads to an endless loop and hangs the kernel. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27 01:20:13 +08:00
if (bond_dev == slave_dev) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "cannot enslave bond to itself.\n");
bonding: disallow enslaving a bond to itself Enslaving a bond to itself leads to an endless loop and hangs the kernel. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27 01:20:13 +08:00
return -EPERM;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* vlan challenged mutual exclusion */
/* no need to lock since we're protected by rtnl_lock */
if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "%s is NETIF_F_VLAN_CHALLENGED\n",
slave_dev->name);
vlan: fix bond/team enslave of vlan challenged slave/port In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-14 12:30:56 +08:00
if (vlan_uses_dev(bond_dev)) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
slave_dev->name, bond_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EPERM;
} else {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
slave_dev->name, slave_dev->name,
bond_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} else {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "%s is !NETIF_F_VLAN_CHALLENGED\n",
slave_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Old ifenslave binaries are no longer supported. These can
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
* be identified with moderate accuracy by the state of the slave:
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
* the current ifenslave will set the interface down prior to
* enslaving it; the old ifenslave will not.
*/
net: bonding: remove redudant brackets It is not necessary to use two brackets. As such, the redudant brackets are removed. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 18:00:55 +08:00
if (slave_dev->flags & IFF_UP) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "%s is up - this may be due to an out of date ifenslave\n",
slave_dev->name);
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
res = -EPERM;
goto err_undo_flags;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net/bonding: Enable bonding to enslave non ARPHRD_ETHER This patch changes some of the bond netdevice attributes and functions to be that of the active slave for the case of the enslaved device not being of ARPHRD_ETHER type. Basically it overrides those setting done by ether_setup(), which are netdevice **type** dependent and hence might be not appropriate for devices of other types. It also enforces mutual exclusion on bonding slaves from dissimilar ether types, as was concluded over the v1 discussion. IPoIB (see Documentation/infiniband/ipoib.txt) MAC address is made of a 3 bytes IB QP (Queue Pair) number and 16 bytes IB port GID (Global ID) of the port this IPoIB device is bounded to. The QP is a resource created by the IB HW and the GID is an identifier burned into the HCA (i have omitted here some details which are not important for the bonding RFC). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:38 +08:00
/* set bonding device ether type by slave - bonding netdevices are
* created with ether_setup, so when the slave type is not ARPHRD_ETHER
* there is a need to override some of the type dependent attribs/funcs.
*
* bond ether type mutual exclusion - don't allow slaves of dissimilar
* ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
*/
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (!bond_has_slaves(bond)) {
bonding: clean muticast addresses when device changes type Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-15 12:56:31 +08:00
if (bond_dev->type != slave_dev->type) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "change device type from %d to %d\n",
bond_dev->type, slave_dev->type);
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 17:37:40 +08:00
net: remove netdev_bonding_change() I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 06:14:57 +08:00
res = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE,
bond_dev);
bonding: check return value of nofitier when changing type This patch adds the possibility to refuse the bonding type change for other subsystems (such as for example bridge, vlan, etc.) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 18:29:35 +08:00
res = notifier_to_errno(res);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "refused to change device type\n");
bonding: check return value of nofitier when changing type This patch adds the possibility to refuse the bonding type change for other subsystems (such as for example bridge, vlan, etc.) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10 18:29:35 +08:00
res = -EBUSY;
goto err_undo_flags;
}
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 17:37:40 +08:00
bonding: flush unicast and multicast lists when changing type After the type change, addresses in unicast and multicast lists wouldn't make sense, not to mention possible different lenghts. So flush both lists here. Note "dev_addr_discard" will be very soon replaced by "dev_mc_flush" (once mc_list conversion will be done). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19 12:00:23 +08:00
/* Flush unicast and multicast addresses */
net: move address list functions to a separate file +little renaming of unicast functions to be smooth with multicast ones Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 05:22:09 +08:00
dev_uc_flush(bond_dev);
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 05:22:57 +08:00
dev_mc_flush(bond_dev);
bonding: flush unicast and multicast lists when changing type After the type change, addresses in unicast and multicast lists wouldn't make sense, not to mention possible different lenghts. So flush both lists here. Note "dev_addr_discard" will be very soon replaced by "dev_mc_flush" (once mc_list conversion will be done). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19 12:00:23 +08:00
bonding: clean muticast addresses when device changes type Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-15 12:56:31 +08:00
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 14:05:38 +08:00
else {
bonding: clean muticast addresses when device changes type Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-15 12:56:31 +08:00
ether_setup(bond_dev);
net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 14:05:38 +08:00
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
}
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 17:37:40 +08:00
net: remove netdev_bonding_change() I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 06:14:57 +08:00
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
bond_dev);
bonding: clean muticast addresses when device changes type Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-15 12:56:31 +08:00
}
net/bonding: Enable bonding to enslave non ARPHRD_ETHER This patch changes some of the bond netdevice attributes and functions to be that of the active slave for the case of the enslaved device not being of ARPHRD_ETHER type. Basically it overrides those setting done by ether_setup(), which are netdevice **type** dependent and hence might be not appropriate for devices of other types. It also enforces mutual exclusion on bonding slaves from dissimilar ether types, as was concluded over the v1 discussion. IPoIB (see Documentation/infiniband/ipoib.txt) MAC address is made of a 3 bytes IB QP (Queue Pair) number and 16 bytes IB port GID (Global ID) of the port this IPoIB device is bounded to. The QP is a resource created by the IB HW and the GID is an identifier burned into the HCA (i have omitted here some details which are not important for the bonding RFC). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:38 +08:00
} else if (bond_dev->type != slave_dev->type) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "%s ether type (%d) is different from other slaves (%d), can not enslave it\n",
slave_dev->name, slave_dev->type, bond_dev->type);
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
res = -EINVAL;
goto err_undo_flags;
net/bonding: Enable bonding to enslave non ARPHRD_ETHER This patch changes some of the bond netdevice attributes and functions to be that of the active slave for the case of the enslaved device not being of ARPHRD_ETHER type. Basically it overrides those setting done by ether_setup(), which are netdevice **type** dependent and hence might be not appropriate for devices of other types. It also enforces mutual exclusion on bonding slaves from dissimilar ether types, as was concluded over the v1 discussion. IPoIB (see Documentation/infiniband/ipoib.txt) MAC address is made of a 3 bytes IB QP (Queue Pair) number and 16 bytes IB port GID (Global ID) of the port this IPoIB device is bounded to. The QP is a resource created by the IB HW and the GID is an identifier burned into the HCA (i have omitted here some details which are not important for the bonding RFC). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:38 +08:00
}
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
if (slave_ops->ndo_set_mac_address == NULL) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "The slave device specified does not support setting the MAC address\n");
bonding: permit enslaving interfaces without set_mac support Currently we exit if the slave isn't the first slave, doesn't support mac address setting and fail_over_mac isn't FOM_ACTIVE. It's wrong because we only require ndo_set_mac_address in case bonding is in active-backup mode and FOM isn't FOM_ACTIVE. To fix this - only exit with an error if we're in a/b mode and have fail_over_mac != FOM_ACTIVE. Also, maintain current behaviour on the first slave (forcibly change fom to FOM_ACTIVE) to not break anyone's configuration. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 19:26:01 +08:00
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP &&
bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
if (!bond_has_slaves(bond)) {
bonding: fail_over_mac should only affect AB mode at enslave and removal processing According to bonding.txt, the fail_over_ma should only affect active-backup mode, but I found that the fail_over_mac could be set to active or follow in all modes, this will cause new slave could not be set to bond's MAC address at enslave processing and restore its own MAC address at removal processing. The correct way to fix the problem is that we should not add restrictions when setting options, just need to modify the bond enslave and removal processing to check the mode in addition to fail_over_mac when setting a slave's MAC during enslavement. The change active slave processing already only calls the fail_over_mac function when in active-backup mode. Thanks for Jay's suggestion. The patch also modify the pr_warning() to pr_warn(). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:29 +08:00
bond->params.fail_over_mac = BOND_FOM_ACTIVE;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "Setting fail_over_mac to active for active-backup mode\n");
bonding: permit enslaving interfaces without set_mac support Currently we exit if the slave isn't the first slave, doesn't support mac address setting and fail_over_mac isn't FOM_ACTIVE. It's wrong because we only require ndo_set_mac_address in case bonding is in active-backup mode and FOM isn't FOM_ACTIVE. To fix this - only exit with an error if we're in a/b mode and have fail_over_mac != FOM_ACTIVE. Also, maintain current behaviour on the first slave (forcibly change fom to FOM_ACTIVE) to not break anyone's configuration. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 19:26:01 +08:00
} else {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n");
bonding: permit enslaving interfaces without set_mac support Currently we exit if the slave isn't the first slave, doesn't support mac address setting and fail_over_mac isn't FOM_ACTIVE. It's wrong because we only require ndo_set_mac_address in case bonding is in active-backup mode and FOM isn't FOM_ACTIVE. To fix this - only exit with an error if we're in a/b mode and have fail_over_mac != FOM_ACTIVE. Also, maintain current behaviour on the first slave (forcibly change fom to FOM_ACTIVE) to not break anyone's configuration. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 19:26:01 +08:00
res = -EOPNOTSUPP;
goto err_undo_flags;
bonding: fail_over_mac should only affect AB mode at enslave and removal processing According to bonding.txt, the fail_over_ma should only affect active-backup mode, but I found that the fail_over_mac could be set to active or follow in all modes, this will cause new slave could not be set to bond's MAC address at enslave processing and restore its own MAC address at removal processing. The correct way to fix the problem is that we should not add restrictions when setting options, just need to modify the bond enslave and removal processing to check the mode in addition to fail_over_mac when setting a slave's MAC during enslavement. The change active slave processing already only calls the fail_over_mac function when in active-backup mode. Thanks for Jay's suggestion. The patch also modify the pr_warning() to pr_warn(). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:29 +08:00
}
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
netpoll: disable netpoll when enslave a device V3: rename NETDEV_ENSLAVE to NETDEV_JOIN Currently we do nothing when we enslave a net device which is running netconsole. Neil pointed out that we may get weird results in such case, so let's disable netpoll on the device being enslaved. I think it is too harsh to prevent the device being ensalved if it is running netconsole. By the way, this patch also removes the NETDEV_GOING_DOWN from netconsole netdev notifier, because netpoll will check if the device is running or not and we don't handle NETDEV_PRE_UP neither. This patch is based on net-next-2.6. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-20 05:39:10 +08:00
call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
bonding: move dev_addr cpy to bond_enslave Move the code that copies slave's mac address in case that's the first slave into bond_enslave. Ifenslave app does this also but that's not a problem. This is something that should be done in bond_enslave, and it shound not matter from where is it called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-19 09:14:29 +08:00
/* If this is the first slave, then we need to set the master's hardware
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
* address to be the same as the slave's.
*/
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (!bond_has_slaves(bond) &&
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
bond->dev->addr_assign_type == NET_ADDR_RANDOM)
bond: have random dev address by default instead of zeroes Makes more sense to have randomly generated address by default than to have all zeroes. It also allows user to for example put the bond into bridge without need to have any slaves in it. Also note that this changes only behaviour of bonds with no slaves. Once the first slave device is enslaved, its address will be used (no change here). Also, fix dev_assign_type values on the way. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:08:11 +08:00
bond_set_dev_addr(bond->dev, slave_dev);
bonding: move dev_addr cpy to bond_enslave Move the code that copies slave's mac address in case that's the first slave into bond_enslave. Ifenslave app does this also but that's not a problem. This is something that should be done in bond_enslave, and it shound not matter from where is it called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-19 09:14:29 +08:00
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
new_slave = bond_alloc_slave(bond);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!new_slave) {
res = -ENOMEM;
goto err_undo_flags;
}
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
bonding: populate essential new_slave->bond/dev early The new bond_free_slave() needs new_slave->bond to verify if additional structures were allocated, so populate it early so that, in case of failure in bond_enslave(), we would be able to get it. Also populate the new_slave->dev field, as it's too one of the most needed things to assign early. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-21 23:42:00 +08:00
new_slave->bond = bond;
new_slave->dev = slave_dev;
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Set the new_slave's queue_id to be zero. Queue ID mapping
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
* is set via sysfs or module option if desired.
*/
new_slave->queue_id = 0;
bonding: move slave MTU handling from sysfs V2 V1->V2: corrected res/ret use For some reason, MTU handling (storing, and restoring) is taking place in bond_sysfs. The correct place for this code is in bond_enslave, bond_release. So move it there. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 13:42:40 +08:00
/* Save slave's original mtu and then set it to match the bond */
new_slave->original_mtu = slave_dev->mtu;
res = dev_set_mtu(slave_dev, bond->dev->mtu);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Error %d calling dev_set_mtu\n", res);
bonding: move slave MTU handling from sysfs V2 V1->V2: corrected res/ret use For some reason, MTU handling (storing, and restoring) is taking place in bond_sysfs. The correct place for this code is in bond_enslave, bond_release. So move it there. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 13:42:40 +08:00
goto err_free;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Save slave's original ("permanent") mac address for modes
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
* that need it, and for restoring it upon release, and then
* set it to the master's address
*/
bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo, bar) ether_addr_copy is smaller and faster for some architectures. This relies on a stack frame being at least __aligned(2) for one use of an Ethernet address on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:02:17 +08:00
ether_addr_copy(new_slave->perm_hwaddr, slave_dev->dev_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fail_over_mac should only affect AB mode at enslave and removal processing According to bonding.txt, the fail_over_ma should only affect active-backup mode, but I found that the fail_over_mac could be set to active or follow in all modes, this will cause new slave could not be set to bond's MAC address at enslave processing and restore its own MAC address at removal processing. The correct way to fix the problem is that we should not add restrictions when setting options, just need to modify the bond enslave and removal processing to check the mode in addition to fail_over_mac when setting a slave's MAC during enslavement. The change active slave processing already only calls the fail_over_mac function when in active-backup mode. Thanks for Jay's suggestion. The patch also modify the pr_warning() to pr_warn(). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:29 +08:00
if (!bond->params.fail_over_mac ||
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Set slave to master's mac address. The application already
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
* set the master's mac address to that of the first slave
*/
memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
addr.sa_family = slave_dev->type;
res = dev_set_mac_address(slave_dev, &addr);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Error %d calling set_mac_address\n", res);
bonding: move slave MTU handling from sysfs V2 V1->V2: corrected res/ret use For some reason, MTU handling (storing, and restoring) is taking place in bond_sysfs. The correct place for this code is in bond_enslave, bond_release. So move it there. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 13:42:40 +08:00
goto err_restore_mtu;
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
}
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Prevent IPv6 link local address on enslaved devices Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 21:28:43 +08:00
/* set slave flag before open to prevent IPv6 addrconf */
slave_dev->flags |= IFF_SLAVE;
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
/* open the slave since the application closed it */
res = dev_open(slave_dev);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Opening slave %s failed\n", slave_dev->name);
bonding: populate neighbour's private on enslave Use the new provided function when attaching the lower slave to populate its ->private with struct slave *new_slave. Also, move it to the end to be able to 'find' it only after it was completely initialized, and deinitialize in the first place on release. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:10 +08:00
goto err_restore_mac;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] bonding: Add priv_flag to avoid event mishandling Add priv_flag to specifically identify bonding-involved devices. Needed because IFF_MASTER is an unreliable identifier (vlan interfaces above bonding will inherit IFF_MASTER). Misidentification of devices would cause notifier events for other devices to be erroneously processed by bonding, causing various havoc. Bug discovered by Martin Papik <martin.papik@ipsec.info>; this patch is modified from his original. Signed-off-by: Martin Papik <martin.papik@ipsec.info> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:10 +08:00
slave_dev->priv_flags |= IFF_BONDING;
bonding: make global bonding stats more reliable As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29 10:34:37 +08:00
/* initialize slave stats */
dev_get_stats(new_slave->dev, &new_slave->slave_stats);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: add and use bond_is_lb() Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:07:13 +08:00
if (bond_is_lb(bond)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* bond_alb_init_slave() must be called before all other stages since
* it might fail and we do not want to have to undo everything
*/
res = bond_alb_init_slave(bond, new_slave);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (res)
bonding: fix enslavement error unwinds As part of: commit c2edacf80e155ef54ae4774379d461b60896bc2e Author: Jay Vosburgh <fubar@us.ibm.com> Date: Mon Jul 9 10:42:47 2007 -0700 bonding / ipv6: no addrconf for slaves separately from master two steps were rearranged in the enslavement process: netdev_set_master is now before the call to dev_open to open the slave. This patch updates the error cases and unwind process at the end of bond_enslave to match the new order. Without this patch, it is possible for the enslavement to fail, but leave the slave with IFF_SLAVE set in its flags. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-03 09:06:02 +08:00
goto err_close;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
/* If the mode uses primary, then the following is handled by
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
* bond_change_active_slave().
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (!bond_uses_primary(bond)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* set promiscuity level to new slave */
if (bond_dev->flags & IFF_PROMISC) {
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
res = dev_set_promiscuity(slave_dev, 1);
if (res)
goto err_close;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* set allmulti level to new slave */
if (bond_dev->flags & IFF_ALLMULTI) {
bonding: Check return of dev_set_promiscuity/allmulti dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In bond_alb and bond_main, we check all positive increment for promiscuity and allmulti to get error return. But there are still two problems left. 1. Some code path has no mechanism to signal errors upstream. 2. If there are multi slaves, it's hard to tell which slaves increment promisc/allmulti successfully and which failed. So I left these problems to be FIXME. Fortunately, the overflow is very rare case. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 11:51:36 +08:00
res = dev_set_allmulti(slave_dev, 1);
if (res)
goto err_close;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
netdev: Do not use TX lock to protect address lists. Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 15:15:08 +08:00
netif_addr_lock_bh(bond_dev);
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
dev_mc_sync_multiple(slave_dev, bond_dev);
dev_uc_sync_multiple(slave_dev, bond_dev);
netdev: Do not use TX lock to protect address lists. Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 15:15:08 +08:00
netif_addr_unlock_bh(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* add lacpdu mc addr to mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 05:22:57 +08:00
dev_mc_add(slave_dev, lacpdu_multicast);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: fix error return code in bond_enslave() Fix to return a negative error code in the add bond vlan ids error handling case instead of 0, as done elsewhere in this function. Introduced by commit 1ff412ad7714f6952f76ffd77f0a7f2f563288a1. (bonding: change the bond's vlan syncing functions with the standard ones) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23 10:45:07 +08:00
res = vlan_vids_add_by_dev(slave_dev, bond_dev);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n",
slave_dev->name);
bonding: change the bond's vlan syncing functions with the standard ones Now we have vlan_vids_add/del_by_dev() which serve the same purpose as bond's bond_add/del_vlans_on_slave() with the good side effect of reverting the changes if one of the additions fails. There's only 1 change in the behaviour of enslave: if adding of the vlans to the slave fails, we'll fail the enslaving because otherwise we might delete some vlan that wasn't added by the bonding. The only way this may happen is with ENOMEM currently, so we're in trouble anyway. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-06 18:40:15 +08:00
goto err_close;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: remove bond_prev_slave() We don't really need it, and it's really hard to RCUify the list->prev. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:25 +08:00
prev_slave = bond_last_slave(bond);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
new_slave->delay = 0;
new_slave->link_failure_count = 0;
bonding: don't call update_speed_duplex() under spinlocks bond_update_speed_duplex() might sleep while calling underlying slave's routines. Move it out of atomic context in bond_enslave() and remove it from bond_miimon_commit() - it was introduced by commit 546add79, however when the slave interfaces go up/change state it's their responsibility to fire NETDEV_UP/NETDEV_CHANGE events so that bonding can properly update their speed. I've tested it on all combinations of ifup/ifdown, autoneg/speed/duplex changes, remote-controlled and local, on (not) MII-based cards. All changes are visible. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 14:31:32 +08:00
bond_update_speed_duplex(new_slave);
bonding: rename last_arp_rx to last_rx To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:47 +08:00
new_slave->last_rx = jiffies -
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
(msecs_to_jiffies(bond->params.arp_interval) + 1);
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
bonding: rename last_arp_rx to last_rx To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:47 +08:00
new_slave->target_last_arp_rx[i] = new_slave->last_rx;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (bond->params.miimon && !bond->params.use_carrier) {
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
if ((link_reporting == -1) && !bond->params.arp_interval) {
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* miimon is set but a bonded network driver
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* does not support ETHTOOL/MII and
* arp_interval is not set. Note: if
* use_carrier is enabled, we will never go
* here (because netif_carrier is always
* supported); thus, we don't need to change
* the messages for netif_carrier.
*/
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n",
slave_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n",
slave_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/* check for initial state */
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
if (bond->params.miimon) {
if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) {
if (bond->params.updelay) {
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
bond_set_slave_link_state(new_slave,
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
BOND_LINK_BACK,
BOND_SLAVE_NOTIFY_NOW);
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
new_slave->delay = bond->params.updelay;
} else {
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
bond_set_slave_link_state(new_slave,
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(new_slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
} else if (bond->params.arp_interval) {
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
bond_set_slave_link_state(new_slave,
(netif_carrier_ok(slave_dev) ?
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
BOND_LINK_UP : BOND_LINK_DOWN),
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(new_slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
if (new_slave->link != BOND_LINK_DOWN)
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
new_slave->last_link_up = jiffies;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Initial state of slave_dev is BOND_LINK_%s\n",
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
bonding: start slaves with link down for ARP monitor Initialize slave device link state as down if ARP monitor is active and net_carrier_ok() returns zero. Also shift initial value of its last_arp_tx so that it doesn't immediately cause fake detection of "up" state. When ARP monitoring is used, initializing the slave device with up link state can cause ARP monitor to detect link failure before the device is really up (with igb driver, this can take more than two seconds). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-17 10:02:06 +08:00
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond) && bond->params.primary[0]) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* if there is a primary slave, remember it */
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
rcu_assign_pointer(bond->primary_slave, new_slave);
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
bond->force_primary = true;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
switch (BOND_MODE(bond)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case BOND_MODE_ACTIVEBACKUP:
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(new_slave,
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case BOND_MODE_8023AD:
/* in 802.3ad mode, the internal mechanism
* will activate the slaves in the selected
* aggregator
*/
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* if this is the first slave */
bonding: correctly verify for the first slave in bond_enslave After commit 1f718f0f4f97145f4072d2d72dcf85069ca7226d ("bonding: populate neighbour's private on enslave"), we've moved the actual 'linking' in the end of the function - so that, once linked, the slave is ready to be used, and is not still in the process of enslaving. However, 802.3ad verified if it's the first slave by looking at the if (bond_first_slave(bond) == new_slave) which, because we've moved the linking to the end, became broken - on the first slave bond_first_slave(bond) returns NULL. Fix this by verifying if the prev_slave, that equals bond_last_slave(), is actually populated - if it is - then it's not the first slave, and vice versa. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27 21:10:57 +08:00
if (!prev_slave) {
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
SLAVE_AD_INFO(new_slave)->id = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Initialize AD with the number of times that the AD timer is called in 1 second
* can be called only after the mac address of the bond is set
*/
bonding:delete lacp_fast from ad_bond_info These is also a bug, that if you modify lacp_rate via sysfs, and add new slaves in bonding, new slaves won't use the latest lacp_rate, since ad_bond_info->lacp_fast is initialized only once, in bond_3ad_initialize(). Since both struct bond_params and ad_bond_info have lacp_fast, they are duplicate and need extra synchronization. bond_3ad_bind_slave() can use bond_params->lacp_fast to initialize port. So we can just remove lacp_fast from struct ad_bond_info. Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09 05:19:02 +08:00
bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
SLAVE_AD_INFO(new_slave)->id =
SLAVE_AD_INFO(prev_slave)->id + 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bond_3ad_bind_slave(new_slave);
break;
case BOND_MODE_TLB:
case BOND_MODE_ALB:
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
bond_set_active_slave(new_slave);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
default:
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "This slave is always active in trunk mode\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* always active in trunk mode */
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
bond_set_active_slave(new_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* In trunking mode there is little meaning to curr_active_slave
* anyway (it holds no special properties of the bond device),
* so we can change it without calling change_active_interface()
*/
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (!rcu_access_pointer(bond->curr_active_slave) &&
new_slave->link == BOND_LINK_UP)
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
rcu_assign_pointer(bond->curr_active_slave, new_slave);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
} /* switch(bond_mode) */
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
bond: cleanup netpoll code This started out with fixing a sparse warning, then I realized that the wrapper function bond_netpoll_info could just be removed by rolling it into the enable code. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25 02:53:57 +08:00
slave_dev->npinfo = bond->dev->npinfo;
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
if (slave_dev->npinfo) {
if (slave_enable_netpoll(new_slave)) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "master_dev is using netpoll, but new slave device does not support netpoll\n");
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
res = -EBUSY;
bonding: fix error handling if slave is busy (v2) If slave device already has a receive handler registered, then the error unwind of bonding device enslave function is broken. The following will leave a pointer to freed memory in the slave device list, causing a later kernel panic. # modprobe dummy # ip li add dummy0-1 link dummy0 type macvlan # modprobe bonding # echo +dummy0 >/sys/class/net/bond0/bonding/slaves The fix is to detach the slave (which removes it from the list) in the unwind path. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-31 21:26:46 +08:00
goto err_detach;
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
}
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
}
#endif
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
net: generic dev_disable_lro() stacked device handling Large receive offloading is known to cause problems if received packets are passed to other host. Therefore the kernel disables it by calling dev_disable_lro() whenever a network device is enslaved in a bridge or forwarding is enabled for it (or globally). For virtual devices we need to disable LRO on the underlying physical device (which is actually receiving the packets). Current dev_disable_lro() code handles this propagation for a vlan (including 802.1ad nested vlan), macvlan or a vlan on top of a macvlan. It doesn't handle other stacked devices and their combinations, in particular propagation from a bond to its slaves which often causes problems in virtualization setups. As we now have generic data structures describing the upper-lower device relationship, dev_disable_lro() can be generalized to disable LRO also for all lower devices (if any) once it is disabled for the device itself. For bonding and teaming devices, it is necessary to disable LRO not only on current slaves at the moment when dev_disable_lro() is called but also on any slave (port) added later. v2: use lower device links for all devices (including vlan and macvlan) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13 14:54:50 +08:00
if (!(bond_dev->features & NETIF_F_LRO))
dev_disable_lro(slave_dev);
bonding: fix rx_handler locking This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 10:38:12 +08:00
res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
new_slave);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Error %d calling netdev_rx_handler_register\n", res);
net: create sysfs symlinks for neighbour devices Also, remove the same functionality from bonding - it will be already done for any device that links to its lower/upper neighbour. The links will be created for dev's kobject, and will look like lower_eth0 for lower device eth0 and upper_bridge0 for upper device bridge0. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:32 +08:00
goto err_detach;
bonding: fix rx_handler locking This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 10:38:12 +08:00
}
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
res = bond_master_upper_dev_link(bond, new_slave);
bonding: populate neighbour's private on enslave Use the new provided function when attaching the lower slave to populate its ->private with struct slave *new_slave. Also, move it to the end to be able to 'find' it only after it was completely initialized, and deinitialize in the first place on release. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:10 +08:00
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Error %d calling bond_master_upper_dev_link\n", res);
bonding: populate neighbour's private on enslave Use the new provided function when attaching the lower slave to populate its ->private with struct slave *new_slave. Also, move it to the end to be able to 'find' it only after it was completely initialized, and deinitialize in the first place on release. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:10 +08:00
goto err_unregister;
}
bonding: add sysfs /slave dir for bond slave devices. Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:57:49 +08:00
res = bond_sysfs_slave_add(new_slave);
if (res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Error %d calling bond_sysfs_slave_add\n", res);
bonding: add sysfs /slave dir for bond slave devices. Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:57:49 +08:00
goto err_upper_unlink;
}
bonding: move bond-specific init after enslave happens As Jiri noted, currently we first do all bonding-specific initialization (specifically - bond_select_active_slave(bond)) before we actually attach the slave (so that it becomes visible through bond_for_each_slave() and friends). This might result in bond_select_active_slave() not seeing the first/new slave and, thus, not actually selecting an active slave. Fix this by moving all the bond-related init part after we've actually completely initialized and linked (via bond_master_upper_dev_link()) the new slave. Also, remove the bond_(de/a)ttach_slave(), it's useless to have functions to ++/-- one int. After this we have all the initialization of the new slave *before* linking, and all the stuff that needs to be done on bonding *after* it. It has also a bonus effect - we can remove the locking on the new slave init completely, and only use it for bond_select_active_slave(). Reported-by: Jiri Pirko <jiri@resnulli.us> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong@huawei.com Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 17:48:30 +08:00
bond->slave_cnt++;
bond_compute_features(bond);
bond_set_carrier(bond);
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond)) {
bonding: Fix deadlock in bonding driver when using netpoll The bonding driver take write locks and spin locks that are shared by the tx path in enslave processing and notification processing, If the netconsole is in use, the bonding can call printk which puts us in the netpoll tx path, if the netconsole is attached to the bonding driver, result in deadlock. So add protection for these place, by checking the netpoll_block_tx state, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 12:06:40 +08:00
block_netpoll_tx();
bonding: move bond-specific init after enslave happens As Jiri noted, currently we first do all bonding-specific initialization (specifically - bond_select_active_slave(bond)) before we actually attach the slave (so that it becomes visible through bond_for_each_slave() and friends). This might result in bond_select_active_slave() not seeing the first/new slave and, thus, not actually selecting an active slave. Fix this by moving all the bond-related init part after we've actually completely initialized and linked (via bond_master_upper_dev_link()) the new slave. Also, remove the bond_(de/a)ttach_slave(), it's useless to have functions to ++/-- one int. After this we have all the initialization of the new slave *before* linking, and all the stuff that needs to be done on bonding *after* it. It has also a bonus effect - we can remove the locking on the new slave init completely, and only use it for bond_select_active_slave(). Reported-by: Jiri Pirko <jiri@resnulli.us> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong@huawei.com Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 17:48:30 +08:00
bond_select_active_slave(bond);
bonding: Fix deadlock in bonding driver when using netpoll The bonding driver take write locks and spin locks that are shared by the tx path in enslave processing and notification processing, If the netconsole is in use, the bonding can call printk which puts us in the netpoll tx path, if the netconsole is attached to the bonding driver, result in deadlock. So add protection for these place, by checking the netpoll_block_tx state, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 12:06:40 +08:00
unblock_netpoll_tx();
bonding: move bond-specific init after enslave happens As Jiri noted, currently we first do all bonding-specific initialization (specifically - bond_select_active_slave(bond)) before we actually attach the slave (so that it becomes visible through bond_for_each_slave() and friends). This might result in bond_select_active_slave() not seeing the first/new slave and, thus, not actually selecting an active slave. Fix this by moving all the bond-related init part after we've actually completely initialized and linked (via bond_master_upper_dev_link()) the new slave. Also, remove the bond_(de/a)ttach_slave(), it's useless to have functions to ++/-- one int. After this we have all the initialization of the new slave *before* linking, and all the stuff that needs to be done on bonding *after* it. It has also a bonus effect - we can remove the locking on the new slave init completely, and only use it for bond_select_active_slave(). Reported-by: Jiri Pirko <jiri@resnulli.us> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong@huawei.com Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 17:48:30 +08:00
}
bonding: populate neighbour's private on enslave Use the new provided function when attaching the lower slave to populate its ->private with struct slave *new_slave. Also, move it to the end to be able to 'find' it only after it was completely initialized, and deinitialize in the first place on release. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:10 +08:00
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
if (bond_mode_uses_xmit_hash(bond))
bond_update_slave_arr(bond, NULL);
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "Enslaving %s as %s interface with %s link\n",
slave_dev->name,
bond_is_active_slave(new_slave) ? "an active" : "a backup",
new_slave->link != BOND_LINK_DOWN ? "an up" : "a down");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* enslave is successful */
net/bonding: Notify state change on slaves Use notifier chain to dispatch an event upon a change in slave state. Event is dispatched with slave specific info. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:31 +08:00
bond_queue_slave_event(new_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
/* Undo stages on error */
bonding: add sysfs /slave dir for bond slave devices. Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:57:49 +08:00
err_upper_unlink:
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
bond_upper_dev_unlink(bond, new_slave);
bonding: add sysfs /slave dir for bond slave devices. Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:57:49 +08:00
bonding: populate neighbour's private on enslave Use the new provided function when attaching the lower slave to populate its ->private with struct slave *new_slave. Also, move it to the end to be able to 'find' it only after it was completely initialized, and deinitialize in the first place on release. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:10 +08:00
err_unregister:
netdev_rx_handler_unregister(slave_dev);
bonding: fix error handling if slave is busy (v2) If slave device already has a receive handler registered, then the error unwind of bonding device enslave function is broken. The following will leave a pointer to freed memory in the slave device list, causing a later kernel panic. # modprobe dummy # ip li add dummy0-1 link dummy0 type macvlan # modprobe bonding # echo +dummy0 >/sys/class/net/bond0/bonding/slaves The fix is to detach the slave (which removes it from the list) in the unwind path. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-31 21:26:46 +08:00
err_detach:
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (!bond_uses_primary(bond))
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
bond_hw_addr_flush(bond_dev, slave_dev);
bonding: change the bond's vlan syncing functions with the standard ones Now we have vlan_vids_add/del_by_dev() which serve the same purpose as bond's bond_add/del_vlans_on_slave() with the good side effect of reverting the changes if one of the additions fails. There's only 1 change in the behaviour of enslave: if adding of the vlans to the slave fails, we'll fail the enslaving because otherwise we might delete some vlan that wasn't added by the bonding. The only way this may happen is with ENOMEM currently, so we're in trouble anyway. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-06 18:40:15 +08:00
vlan_vids_del_by_dev(slave_dev, bond_dev);
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
if (rcu_access_pointer(bond->primary_slave) == new_slave)
RCU_INIT_POINTER(bond->primary_slave, NULL);
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (rcu_access_pointer(bond->curr_active_slave) == new_slave) {
bonding: Fix deadlock in bonding driver when using netpoll The bonding driver take write locks and spin locks that are shared by the tx path in enslave processing and notification processing, If the netconsole is in use, the bonding can call printk which puts us in the netpoll tx path, if the netconsole is attached to the bonding driver, result in deadlock. So add protection for these place, by checking the netpoll_block_tx state, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 12:06:40 +08:00
block_netpoll_tx();
bonding: remove unwanted lock for bond enslave and release The bond_change_active_slave() and bond_select_active_slave() do't need bond lock anymore, so remove the unwanted bond lock for these two functions. The bond_select_active_slave() will release and acquire curr_slave_lock, so the curr_slave_lock need to protect the function. In bond enslave and bond release, the bond slave list is also protected by RTNL, so bond lock is no need to exist, remove the lock and clean the functions. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:07 +08:00
bond_change_active_slave(bond, NULL);
bonding: primary_slave & curr_active_slave are not cleaned on enslave failure On enslave failure primary_slave can point to new_slave which is to be freed, and the same applies to curr_active_slave. So check if this is the case and clean up properly after err_detach because that's the first error code path after they're set. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:33:36 +08:00
bond_select_active_slave(bond);
bonding: Fix deadlock in bonding driver when using netpoll The bonding driver take write locks and spin locks that are shared by the tx path in enslave processing and notification processing, If the netconsole is in use, the bonding can call printk which puts us in the netpoll tx path, if the netconsole is attached to the bonding driver, result in deadlock. So add protection for these place, by checking the netpoll_block_tx state, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 12:06:40 +08:00
unblock_netpoll_tx();
bonding: primary_slave & curr_active_slave are not cleaned on enslave failure On enslave failure primary_slave can point to new_slave which is to be freed, and the same applies to curr_active_slave. So check if this is the case and clean up properly after err_detach because that's the first error code path after they're set. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:33:36 +08:00
}
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
/* either primary_slave or curr_active_slave might've changed */
synchronize_rcu();
bonding: disable netpoll on enslave failure slave_disable_netpoll() is not called upon enslave failure which would lead to a memory leak. Call slave_disable_netpoll() after err_detach as that's the first error path after enabling netpoll on that slave. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:33:37 +08:00
slave_disable_netpoll(new_slave);
bonding: fix error handling if slave is busy (v2) If slave device already has a receive handler registered, then the error unwind of bonding device enslave function is broken. The following will leave a pointer to freed memory in the slave device list, causing a later kernel panic. # modprobe dummy # ip li add dummy0-1 link dummy0 type macvlan # modprobe bonding # echo +dummy0 >/sys/class/net/bond0/bonding/slaves The fix is to detach the slave (which removes it from the list) in the unwind path. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-31 21:26:46 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err_close:
bonding: IFF_BONDING is not stripped on enslave failure While enslaving a new device and after IFF_BONDING flag is set, in case of failure it is not stripped from the device's priv_flags while cleaning up, which could lead to other problems. Cleaning at err_close because the flag is set after dev_open(). v2: no change Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 17:18:56 +08:00
slave_dev->priv_flags &= ~IFF_BONDING;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_close(slave_dev);
err_restore_mac:
bonding: Prevent IPv6 link local address on enslaved devices Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 21:28:43 +08:00
slave_dev->flags &= ~IFF_SLAVE;
bonding: fail_over_mac should only affect AB mode at enslave and removal processing According to bonding.txt, the fail_over_ma should only affect active-backup mode, but I found that the fail_over_mac could be set to active or follow in all modes, this will cause new slave could not be set to bond's MAC address at enslave processing and restore its own MAC address at removal processing. The correct way to fix the problem is that we should not add restrictions when setting options, just need to modify the bond enslave and removal processing to check the mode in addition to fail_over_mac when setting a slave's MAC during enslavement. The change active slave processing already only calls the fail_over_mac function when in active-backup mode. Thanks for Jay's suggestion. The patch also modify the pr_warning() to pr_warn(). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:29 +08:00
if (!bond->params.fail_over_mac ||
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
/* XXX TODO - fom follow mode needs to change master's
* MAC if this slave's MAC is in use by the bond, or at
* least print a warning.
*/
bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo, bar) ether_addr_copy is smaller and faster for some architectures. This relies on a stack frame being at least __aligned(2) for one use of an Ethernet address on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:02:17 +08:00
ether_addr_copy(addr.sa_data, new_slave->perm_hwaddr);
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: move slave MTU handling from sysfs V2 V1->V2: corrected res/ret use For some reason, MTU handling (storing, and restoring) is taking place in bond_sysfs. The correct place for this code is in bond_enslave, bond_release. So move it there. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 13:42:40 +08:00
err_restore_mtu:
dev_set_mtu(slave_dev, new_slave->original_mtu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err_free:
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
bond_free_slave(new_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err_undo_flags:
bonding: reset master mac on first enslave failure If the bond device is supposed to get the first slave's MAC address and the first enslavement fails then we need to reset the master's MAC otherwise it will stay the same as the failed slave device. We do it after err_undo_flags since that is the first place where the MAC can be changed and we check if it should've been the first slave and if the bond's MAC was set to it because that err place is used by multiple locations prior to changing the master's MAC address. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 06:07:01 +08:00
/* Enslave of first slave has failed and we need to fix master's mac */
bonding: correctly handle bonding type change on enslave failure If the bond is enslaving a device with different type it will be setup by it, but if after being setup the enslave fails the bond doesn't switch back its type and also keeps pointers to foreign structures that can be long gone. Thus revert back any type changes if the enslave failed and the bond had to change its type. Example: Before patch: $ echo lo > bond0/bonding/slaves -bash: echo: write error: Cannot assign requested address $ ip l sh bond0 20: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/loopback 16:54:78:34:bd:41 brd 00:00:00:00:00:00 $ echo +eth1 > bond0/bonding/slaves $ ip l sh bond0 20: bond0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff (notice the MASTER flag is gone) After patch: $ echo lo > bond0/bonding/slaves -bash: echo: write error: Cannot assign requested address $ ip l sh bond0 21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:66:94:f6:07:fc brd ff:ff:ff:ff:ff:ff $ echo +eth1 > bond0/bonding/slaves $ ip l sh bond0 21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 04:57:01 +08:00
if (!bond_has_slaves(bond)) {
if (ether_addr_equal_64bits(bond_dev->dev_addr,
slave_dev->dev_addr))
eth_hw_addr_random(bond_dev);
if (bond_dev->type != ARPHRD_ETHER) {
bonding: fix panic on non-ARPHRD_ETHER enslave failure Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-07 09:23:23 +08:00
dev_close(bond_dev);
bonding: correctly handle bonding type change on enslave failure If the bond is enslaving a device with different type it will be setup by it, but if after being setup the enslave fails the bond doesn't switch back its type and also keeps pointers to foreign structures that can be long gone. Thus revert back any type changes if the enslave failed and the bond had to change its type. Example: Before patch: $ echo lo > bond0/bonding/slaves -bash: echo: write error: Cannot assign requested address $ ip l sh bond0 20: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/loopback 16:54:78:34:bd:41 brd 00:00:00:00:00:00 $ echo +eth1 > bond0/bonding/slaves $ ip l sh bond0 20: bond0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff (notice the MASTER flag is gone) After patch: $ echo lo > bond0/bonding/slaves -bash: echo: write error: Cannot assign requested address $ ip l sh bond0 21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:66:94:f6:07:fc brd ff:ff:ff:ff:ff:ff $ echo +eth1 > bond0/bonding/slaves $ ip l sh bond0 21: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:3f:47:69 brd ff:ff:ff:ff:ff:ff Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 04:57:01 +08:00
ether_setup(bond_dev);
bond_dev->flags |= IFF_MASTER;
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
}
}
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return res;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Try to release the slave device <slave> from the bond device <master>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* It is legal to access curr_active_slave without a lock because all the function
bonding: adjust locking comments Now that locks have been removed, remove some unnecessary comments and adjust others to reflect reality. Also add a comment to "mode_lock" to describe its current users and give a brief summary why they need it. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:28 +08:00
* is RTNL-locked. If "all" is true it means that the function is being called
bonding: fix bond_release_all inconsistencies This patch fixes the following inconsistencies in bond_release_all: - IFF_BONDING flag is not stripped from slaves - MTU is not restored - no netdev notifiers are sent Instead of trying to keep bond_release and bond_release_all in sync I think we can re-use bond_release as the environment for calling it is correct (RTNL is held). I have been running tests for the past week and they came out successful. The only way for bond_release to fail is for the slave to be attached in a different bond or to not be a slave but that cannot happen as RTNL is held and no slave manipulations can be achieved. V2: As suggested bond_release is renamed to __bond_release_one with a new parameter "all" introduced so to avoid calling unnecessary code while destroying a bond, and a wrapper for it called bond_release is created because of ndo_del_link. bond_release_all() is removed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:09:42 +08:00
* while destroying a bond interface and all slaves are being released.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* The rules for slave state should be:
* for Active/Backup:
* Active stays on all backups go down
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
bonding: fix bond_release_all inconsistencies This patch fixes the following inconsistencies in bond_release_all: - IFF_BONDING flag is not stripped from slaves - MTU is not restored - no netdev notifiers are sent Instead of trying to keep bond_release and bond_release_all in sync I think we can re-use bond_release as the environment for calling it is correct (RTNL is held). I have been running tests for the past week and they came out successful. The only way for bond_release to fail is for the slave to be attached in a different bond or to not be a slave but that cannot happen as RTNL is held and no slave manipulations can be achieved. V2: As suggested bond_release is renamed to __bond_release_one with a new parameter "all" introduced so to avoid calling unnecessary code while destroying a bond, and a wrapper for it called bond_release is created because of ndo_del_link. bond_release_all() is removed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:09:42 +08:00
static int __bond_release_one(struct net_device *bond_dev,
struct net_device *slave_dev,
bool all)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct slave *slave, *oldcurrent;
struct sockaddr addr;
bonding: Fix broken promiscuity reference counting issue Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Mark Wu <wudxw@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 00:22:15 +08:00
int old_flags = bond_dev->flags;
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 23:29:55 +08:00
netdev_features_t old_features = bond_dev->features;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
!netdev_has_upper_dev(slave_dev, bond_dev)) {
bonding: change error message to debug message in __bond_release_one() In __bond_release_one(), when the interface is not a slave or not a slave of "this" master, it log error message. The message actually should be a debug message matching what bond_enslave() does. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23 09:24:36 +08:00
netdev_dbg(bond_dev, "cannot release %s\n",
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
slave_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
}
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
block_netpoll_tx();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
slave = bond_get_slave_by_dev(bond, slave_dev);
if (!slave) {
/* not a slave of this bond */
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "%s not enslaved\n",
slave_dev->name);
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
unblock_netpoll_tx();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
}
bonding: set inactive flags on release Be correct and symmetric to enslave and set inactive flags during release. That gives LAG offload drivers - lower state change listeners - possibility to do proper cleanup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:21 +08:00
bond_set_slave_inactive_flags(slave, BOND_SLAVE_NOTIFY_NOW);
bonding: add sysfs /slave dir for bond slave devices. Add sub-directory under /sys/class/net/<interface>/slave with read-only attributes for slave. Directory only appears when <interface> is a slave. $ tree /sys/class/net/eth2/slave/ /sys/class/net/eth2/slave/ ├── ad_aggregator_id ├── link_failure_count ├── mii_status ├── perm_hwaddr ├── queue_id └── state $ cat /sys/class/net/eth2/slave/* 2 0 up 40:02:10:ef:06:01 0 active Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:57:49 +08:00
bond_sysfs_slave_del(slave);
bonding: make global bonding stats more reliable As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29 10:34:37 +08:00
/* recompute stats just before removing the slave */
bond_get_stats(bond->dev, &bond->bond_stats);
bonding: fill-up LAG changeupper info struct and pass it along Initialize netdev_lag_upper_info structure by TX type according to current bonding mode and pass it along via netdev_master_upper_dev_link. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:14 +08:00
bond_upper_dev_unlink(bond, slave);
bonding: fix rx_handler locking This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22 10:38:12 +08:00
/* unregister rx_handler early so bond_handle_frame wouldn't be called
* for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
bonding: 3ad: convert to bond->mode_lock Now that we have bond->mode_lock, we can remove the state_machine_lock and use it in its place. There're no fast paths requiring the per-port spinlocks so it should be okay to consolidate them into mode_lock. Also move it inside the unbinding function as we don't want to expose mode_lock outside of the specific modes. Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:27 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_3ad_unbind_slave(slave);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
if (bond_mode_uses_xmit_hash(bond))
bond_update_slave_arr(bond, slave);
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "Releasing %s interface %s\n",
bond_is_active_slave(slave) ? "active" : "backup",
slave_dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
oldcurrent = rcu_access_pointer(bond->curr_active_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
RCU_INIT_POINTER(bond->current_arp_slave, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fail_over_mac should only affect AB mode at enslave and removal processing According to bonding.txt, the fail_over_ma should only affect active-backup mode, but I found that the fail_over_mac could be set to active or follow in all modes, this will cause new slave could not be set to bond's MAC address at enslave processing and restore its own MAC address at removal processing. The correct way to fix the problem is that we should not add restrictions when setting options, just need to modify the bond enslave and removal processing to check the mode in addition to fail_over_mac when setting a slave's MAC during enslavement. The change active slave processing already only calls the fail_over_mac function when in active-backup mode. Thanks for Jay's suggestion. The patch also modify the pr_warning() to pr_warn(). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:29 +08:00
if (!all && (!bond->params.fail_over_mac ||
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP)) {
bonding: use ether_addr_equal_64bits to instead of ether_addr_equal The net_device.dev_addr have more than 2 bytes of additional data after the mac addr, so it is safe to use the ether_addr_equal_64bits(). Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02 09:13:16 +08:00
if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) &&
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
bond_has_slaves(bond))
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_warn(bond_dev, "the permanent HWaddr of %s - %pM - is still in use by %s - set the HWaddr of %s to a different address to avoid conflicts\n",
slave_dev->name, slave->perm_hwaddr,
bond_dev->name, slave_dev->name);
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
}
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
if (rtnl_dereference(bond->primary_slave) == slave)
RCU_INIT_POINTER(bond->primary_slave, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: clean curr_slave_lock use Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:24 +08:00
if (oldcurrent == slave)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_change_active_slave(bond, NULL);
bonding: add and use bond_is_lb() Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:07:13 +08:00
if (bond_is_lb(bond)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Must be called only after the slave has been
* detached from the list and the curr_active_slave
* has been cleared (if our_slave == old_current),
* but before a new active slave is selected.
*/
bond_alb_deinit_slave(bond, slave);
}
bonding: fix bond_release_all inconsistencies This patch fixes the following inconsistencies in bond_release_all: - IFF_BONDING flag is not stripped from slaves - MTU is not restored - no netdev notifiers are sent Instead of trying to keep bond_release and bond_release_all in sync I think we can re-use bond_release as the environment for calling it is correct (RTNL is held). I have been running tests for the past week and they came out successful. The only way for bond_release to fail is for the slave to be attached in a different bond or to not be a slave but that cannot happen as RTNL is held and no slave manipulations can be achieved. V2: As suggested bond_release is renamed to __bond_release_one with a new parameter "all" introduced so to avoid calling unnecessary code while destroying a bond, and a wrapper for it called bond_release is created because of ndo_del_link. bond_release_all() is removed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:09:42 +08:00
if (all) {
bonding: Use RCU_INIT_POINTER() for better overhead and for sparse Although rcu_assign_pointer() can be used to assign a constant NULL pointer, doing so gets you an unnecessary memory barrier and in some circumstances, sparse warnings. This commit therefore changes the rcu_assign_pointer() of NULL in __bond_release_one() to RCU_INIT_POINTER(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-12-10 07:19:53 +08:00
RCU_INIT_POINTER(bond->curr_active_slave, NULL);
bonding: fix bond_release_all inconsistencies This patch fixes the following inconsistencies in bond_release_all: - IFF_BONDING flag is not stripped from slaves - MTU is not restored - no netdev notifiers are sent Instead of trying to keep bond_release and bond_release_all in sync I think we can re-use bond_release as the environment for calling it is correct (RTNL is held). I have been running tests for the past week and they came out successful. The only way for bond_release to fail is for the slave to be attached in a different bond or to not be a slave but that cannot happen as RTNL is held and no slave manipulations can be achieved. V2: As suggested bond_release is renamed to __bond_release_one with a new parameter "all" introduced so to avoid calling unnecessary code while destroying a bond, and a wrapper for it called bond_release is created because of ndo_del_link. bond_release_all() is removed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:09:42 +08:00
} else if (oldcurrent == slave) {
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Note that we hold RTNL over this sequence, so there
bonding: Convert locks to _bh, rework alb locking for new locking Convert locking-related activity to new & improved system. Convert some lock acquisitions to _bh and rework parts of ALB mode, both to avoid deadlocks with workqueue activity. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:49 +08:00
* is no concern that another slave add/remove event
* will interfere.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_select_active_slave(bond);
bonding: Convert locks to _bh, rework alb locking for new locking Convert locking-related activity to new & improved system. Convert some lock acquisitions to _bh and rework parts of ALB mode, both to avoid deadlocks with workqueue activity. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:49 +08:00
}
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (!bond_has_slaves(bond)) {
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
bond_set_carrier(bond);
bond: have random dev address by default instead of zeroes Makes more sense to have randomly generated address by default than to have all zeroes. It also allows user to for example put the bond into bridge without need to have any slaves in it. Also note that this changes only behaviour of bonds with no slaves. Once the first slave device is enslaved, its address will be used (no change here). Also, fix dev_assign_type values on the way. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:08:11 +08:00
eth_hw_addr_random(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
unblock_netpoll_tx();
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
synchronize_rcu();
bonding: fix a div error caused by the slave release path There's a bug in the slave release function which leads the transmit functions which use the bond->slave_cnt to a div by 0 because we might just have released our last slave and made slave_cnt == 0 but at the same time we may have a transmitter after the check for an empty list which will fetch it and use it in the slave id calculation. Fix it by moving the slave_cnt after synchronize_rcu so if this was our last slave any new transmitters will see an empty slave list which is checked after rcu lock but before calling the mode transmit functions which rely on bond->slave_cnt. Fixes: 278b208375 ("bonding: initial RCU conversion") CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 21:20:30 +08:00
bond->slave_cnt--;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (!bond_has_slaves(bond)) {
net/bonding: emit address change event also in bond_release commit 7d26bb103c4 "bonding: emit event when bonding changes MAC" didn't take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding actually changes the mac address (to all zeroes). As a result the neighbours aren't deleted by the core networking code (which does so upon getting that event). Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:19 +08:00
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
bonding: fire NETDEV_RELEASE event only on 0 slaves Currently, if we set up netconsole over bonding and release a slave, netconsole will stop logging on the whole bonding device. Change the behavior to stop the netconsole only when the last slave is released. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06 15:10:32 +08:00
call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
}
net/bonding: emit address change event also in bond_release commit 7d26bb103c4 "bonding: emit event when bonding changes MAC" didn't take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding actually changes the mac address (to all zeroes). As a result the neighbours aren't deleted by the core networking code (which does so upon getting that event). Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:19 +08:00
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
(old_features & NETIF_F_VLAN_CHALLENGED))
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "last VLAN challenged slave %s left bond %s - VLAN blocking is removed\n",
slave_dev->name, bond_dev->name);
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bonding: change the bond's vlan syncing functions with the standard ones Now we have vlan_vids_add/del_by_dev() which serve the same purpose as bond's bond_add/del_vlans_on_slave() with the good side effect of reverting the changes if one of the additions fails. There's only 1 change in the behaviour of enslave: if adding of the vlans to the slave fails, we'll fail the enslaving because otherwise we might delete some vlan that wasn't added by the bonding. The only way this may happen is with ENOMEM currently, so we're in trouble anyway. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-06 18:40:15 +08:00
vlan_vids_del_by_dev(slave_dev, bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* If the mode uses primary, then this case was handled above by
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
* bond_change_active_slave(..., NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (!bond_uses_primary(bond)) {
bonding: Fix broken promiscuity reference counting issue Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Mark Wu <wudxw@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 00:22:15 +08:00
/* unset promiscuity level from slave
* NOTE: The NETDEV_CHANGEADDR call above may change the value
* of the IFF_PROMISC flag in the bond_dev, but we need the
* value of that flag before that change, as that was the value
* when this slave was attached, so we cache at the start of the
* function and use it here. Same goes for ALLMULTI below
*/
if (old_flags & IFF_PROMISC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_set_promiscuity(slave_dev, -1);
/* unset allmulti level from slave */
bonding: Fix broken promiscuity reference counting issue Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Mark Wu <wudxw@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28 00:22:15 +08:00
if (old_flags & IFF_ALLMULTI)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev_set_allmulti(slave_dev, -1);
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
bond_hw_addr_flush(bond_dev, slave_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
slave_disable_netpoll(slave);
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* close slave before restoring its mac address */
dev_close(slave_dev);
bonding: fail_over_mac should only affect AB mode at enslave and removal processing According to bonding.txt, the fail_over_ma should only affect active-backup mode, but I found that the fail_over_mac could be set to active or follow in all modes, this will cause new slave could not be set to bond's MAC address at enslave processing and restore its own MAC address at removal processing. The correct way to fix the problem is that we should not add restrictions when setting options, just need to modify the bond enslave and removal processing to check the mode in addition to fail_over_mac when setting a slave's MAC during enslavement. The change active slave processing already only calls the fail_over_mac function when in active-backup mode. Thanks for Jay's suggestion. The patch also modify the pr_warning() to pr_warn(). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:29 +08:00
if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
/* restore original ("permanent") mac address */
bonding: Convert memcpy(foo, bar, ETH_ALEN) to ether_addr_copy(foo, bar) ether_addr_copy is smaller and faster for some architectures. This relies on a stack frame being at least __aligned(2) for one use of an Ethernet address on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:02:17 +08:00
ether_addr_copy(addr.sa_data, slave->perm_hwaddr);
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: move slave MTU handling from sysfs V2 V1->V2: corrected res/ret use For some reason, MTU handling (storing, and restoring) is taking place in bond_sysfs. The correct place for this code is in bond_enslave, bond_release. So move it there. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 13:42:40 +08:00
dev_set_mtu(slave_dev, slave->original_mtu);
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag Since bond-related code was moved from net/core/dev.c into bonding, IFF_SLAVE_INACTIVE is no longer needed. Replace is with flag "inactive" stored in slave structure Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 16:46:43 +08:00
slave_dev->priv_flags &= ~IFF_BONDING;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: alloc the structure ad_info dynamically in per slave The struct ad_slave_info is very huge, and only be used for 802.3ad mode, so alloc the structure dynamically could save 356 Bits for every slave in non 802.3ad mode. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 15:08:43 +08:00
bond_free_slave(slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: fix bond_release_all inconsistencies This patch fixes the following inconsistencies in bond_release_all: - IFF_BONDING flag is not stripped from slaves - MTU is not restored - no netdev notifiers are sent Instead of trying to keep bond_release and bond_release_all in sync I think we can re-use bond_release as the environment for calling it is correct (RTNL is held). I have been running tests for the past week and they came out successful. The only way for bond_release to fail is for the slave to be attached in a different bond or to not be a slave but that cannot happen as RTNL is held and no slave manipulations can be achieved. V2: As suggested bond_release is renamed to __bond_release_one with a new parameter "all" introduced so to avoid calling unnecessary code while destroying a bond, and a wrapper for it called bond_release is created because of ndo_del_link. bond_release_all() is removed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:09:42 +08:00
/* A wrapper used because of ndo_del_link */
int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
return __bond_release_one(bond_dev, slave_dev, false);
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* First release a slave and then destroy the bond if no more slaves are left.
* Must be under rtnl_lock when this function is called.
*/
bonding: make release_and_destroy static Only used in main file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-15 13:09:34 +08:00
static int bond_release_and_destroy(struct net_device *bond_dev,
struct net_device *slave_dev)
net/bonding: Destroy bonding master when last slave is gone When bonding enslaves non Ethernet devices it takes pointers to functions in the module that owns the slaves. In this case it becomes unsafe to keep the bonding master registered after last slave was unenslaved because we don't know if the pointers are still valid. Destroying the bond when slave_cnt is zero ensures that these functions be used anymore. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:43 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
net/bonding: Destroy bonding master when last slave is gone When bonding enslaves non Ethernet devices it takes pointers to functions in the module that owns the slaves. In this case it becomes unsafe to keep the bonding master registered after last slave was unenslaved because we don't know if the pointers are still valid. Destroying the bond when slave_cnt is zero ensures that these functions be used anymore. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:43 +08:00
int ret;
ret = bond_release(bond_dev, slave_dev);
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (ret == 0 && !bond_has_slaves(bond)) {
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "Destroying bond %s\n",
bond_dev->name);
bonding: fix destruction of bond with devices different from arphrd_ether When the bonding is being unloaded and the netdevice notifier is unregistered it executes NETDEV_UNREGISTER for each device which should remove the bond's proc entry but if the device enslaved is not of ARPHRD_ETHER type and is in front of the bonding, it may execute bond_release_and_destroy() first which would release the last slave and destroy the bond device leaving the proc entry and thus we will get the following error (with dynamic debug on for bond_netdev_event to see the events order): [ 908.963051] eql: event: 9 [ 908.963052] eql: IFF_SLAVE [ 908.963054] eql: event: 2 [ 908.963056] eql: IFF_SLAVE [ 908.963058] eql: event: 6 [ 908.963059] eql: IFF_SLAVE [ 908.963110] bond0: Releasing active interface eql [ 908.976168] bond0: Destroying bond bond0 [ 908.976266] bond0 (unregistering): Released all slaves [ 908.984097] ------------[ cut here ]------------ [ 908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575 remove_proc_entry+0x112/0x160() [ 908.984110] remove_proc_entry: removing non-empty directory 'net/bonding', leaking at least 'bond0' [ 908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore usb_common [last unloaded: bonding] [ 908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G W O 4.2.0-rc2+ #8 [ 908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 908.984172] 0000000000000000 ffffffff81732d41 ffffffff81525b34 ffff8800358dfda8 [ 908.984175] ffffffff8106c521 ffff88003595af78 ffff88003595af40 ffff88003e3a4280 [ 908.984178] ffffffffa058d040 0000000000000000 ffffffff8106c59a ffffffff8172ebd0 [ 908.984181] Call Trace: [ 908.984188] [<ffffffff81525b34>] ? dump_stack+0x40/0x50 [ 908.984193] [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0 [ 908.984196] [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50 [ 908.984199] [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160 [ 908.984205] [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30 [bonding] [ 908.984208] [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding] [ 908.984217] [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70 [ 908.984225] [<ffffffff8142f52d>] ? unregister_pernet_operations+0x8d/0xd0 [ 908.984228] [<ffffffff8142f58d>] ? unregister_pernet_subsys+0x1d/0x30 [ 908.984232] [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding] [ 908.984236] [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250 [ 908.984241] [<ffffffff81086f99>] ? task_work_run+0x89/0xc0 [ 908.984244] [<ffffffff8152b732>] ? entry_SYSCALL_64_fastpath+0x16/0x75 [ 908.984247] ---[ end trace 7c006ed4abbef24b ]--- Thus remove the proc entry manually if bond_release_and_destroy() is used. Because of the checks in bond_remove_proc_entry() it's not a problem for a bond device to change namespaces (the bug fixed by the Fixes commit) but since commit f9399814927ad ("bonding: Don't allow bond devices to change network namespaces.") that can't happen anyway. Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: a64d49c3dd50 ("bonding: Manage /proc/net/bonding/ entries from the netdev events") Tested-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 03:52:51 +08:00
bond_remove_proc_entry(bond);
bonding: fix destructor It is not safe to use a network device destructor that is a function in the module, since it can be called after module is unloaded if sysfs handle is open. When eventually using netlink, the device cleanup code needs to be done via uninit function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:47 +08:00
unregister_netdevice(bond_dev);
net/bonding: Destroy bonding master when last slave is gone When bonding enslaves non Ethernet devices it takes pointers to functions in the module that owns the slaves. In this case it becomes unsafe to keep the bonding master registered after last slave was unenslaved because we don't know if the pointers are still valid. Destroying the bond when slave_cnt is zero ensures that these functions be used anymore. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:43 +08:00
}
return ret;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
bond_fill_ifbond(bond, info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
int i = 0, res = -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct slave *slave;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
if (i++ == (int)info->slave_id) {
bonding: bond_slave_info_query() fix bond_slave_info_query() should keep a read lock while accessing slave info, or risk accessing stale data and corruption. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23 11:39:04 +08:00
res = 0;
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
bond_fill_ifslave(slave, info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
}
bonding: bond_slave_info_query() fix bond_slave_info_query() should keep a read lock while accessing slave info, or risk accessing stale data and corruption. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23 11:39:04 +08:00
return res;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*-------------------------------- Monitoring -------------------------------*/
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
/* called with rcu_read_lock() */
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
static int bond_miimon_inspect(struct bonding *bond)
{
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
int link_state, commit = 0;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
struct slave *slave;
bonding: ignore updelay param when there is no active slave Pointed out by Sean E. Millichamp. Quote from Documentation/networking/bonding.txt: "Note that when a bonding interface has no active links, the driver will immediately reuse the first link that goes up, even if the updelay parameter has been specified (the updelay is ignored in this case). If there are slave interfaces waiting for the updelay timeout to expire, the interface that first went into that state will be immediately reused. This reduces down time of the network if the value of updelay has been overestimated, and since this occurs only in cases with no connectivity, there is no additional penalty for ignoring the updelay." This patch actually changes the behaviour in this way. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-24 11:57:29 +08:00
bool ignore_updelay;
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
ignore_updelay = !rcu_dereference(bond->curr_active_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: rebuild the lock use for bond_mii_monitor() The bond_mii_monitor() still use bond lock to protect bond slave list, it is no effect, I have 2 way to fix the problem, move the RTNL to the top of the function, or add RCU to protect the bond slave list, according to the Jay Vosburgh's opinion, 10 times one second is a truely big performance loss if use RTNL to protect the whole monitor, so I would take the advice and use RCU to protect the bond slave list. The bond_has_slave() will not protect by anything, there will no things happen if the slave list is be changed, unless the bond was free, but it will not happened before the monitor, the bond will closed before be freed. The peers notify for the bond will calling curr_active_slave, so derefence the slave to make sure we will accessing the same slave if the curr_active_slave changed, as the rcu dereference need in read-side critical sector and bond_change_active_slave() will call it with no RCU hold, so add peer notify in rcu_read_lock which will be nested in monitor. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:39 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
slave->new_link = BOND_LINK_NOCHANGE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
link_state = bond_check_dev_link(bond, slave->dev, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (slave->link) {
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
case BOND_LINK_UP:
if (link_state)
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_FAIL,
BOND_SLAVE_NOTIFY_LATER);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
slave->delay = bond->params.downdelay;
if (slave->delay) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status down for %sinterface %s, disabling it in %d ms\n",
(BOND_MODE(bond) ==
BOND_MODE_ACTIVEBACKUP) ?
(bond_is_active_slave(slave) ?
"active " : "backup ") : "",
slave->dev->name,
bond->params.downdelay * bond->params.miimon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
/*FALLTHRU*/
case BOND_LINK_FAIL:
if (link_state) {
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* recovered before downdelay expired */
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_LATER);
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
slave->last_link_up = jiffies;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status up again after %d ms for interface %s\n",
(bond->params.downdelay - slave->delay) *
bond->params.miimon,
slave->dev->name);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
if (slave->delay <= 0) {
slave->new_link = BOND_LINK_DOWN;
commit++;
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
slave->delay--;
break;
case BOND_LINK_DOWN:
if (!link_state)
continue;
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_BACK,
BOND_SLAVE_NOTIFY_LATER);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
slave->delay = bond->params.updelay;
if (slave->delay) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status up for interface %s, enabling it in %d ms\n",
slave->dev->name,
ignore_updelay ? 0 :
bond->params.updelay *
bond->params.miimon);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
}
/*FALLTHRU*/
case BOND_LINK_BACK:
if (!link_state) {
net/bonding: Move slave state changes to a helper function Move slave state changes to a helper function, this is a pre-step for adding functionality of dispatching an event when this helper is called. This commit doesn't add new functionality. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 22:48:30 +08:00
bond_set_slave_link_state(slave,
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_LATER);
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status down again after %d ms for interface %s\n",
(bond->params.updelay - slave->delay) *
bond->params.miimon,
slave->dev->name);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
continue;
}
bonding: ignore updelay param when there is no active slave Pointed out by Sean E. Millichamp. Quote from Documentation/networking/bonding.txt: "Note that when a bonding interface has no active links, the driver will immediately reuse the first link that goes up, even if the updelay parameter has been specified (the updelay is ignored in this case). If there are slave interfaces waiting for the updelay timeout to expire, the interface that first went into that state will be immediately reused. This reduces down time of the network if the value of updelay has been overestimated, and since this occurs only in cases with no connectivity, there is no additional penalty for ignoring the updelay." This patch actually changes the behaviour in this way. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-24 11:57:29 +08:00
if (ignore_updelay)
slave->delay = 0;
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
if (slave->delay <= 0) {
slave->new_link = BOND_LINK_UP;
commit++;
bonding: ignore updelay param when there is no active slave Pointed out by Sean E. Millichamp. Quote from Documentation/networking/bonding.txt: "Note that when a bonding interface has no active links, the driver will immediately reuse the first link that goes up, even if the updelay parameter has been specified (the updelay is ignored in this case). If there are slave interfaces waiting for the updelay timeout to expire, the interface that first went into that state will be immediately reused. This reduces down time of the network if the value of updelay has been overestimated, and since this occurs only in cases with no connectivity, there is no additional penalty for ignoring the updelay." This patch actually changes the behaviour in this way. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-24 11:57:29 +08:00
ignore_updelay = false;
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
slave->delay--;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
return commit;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
static void bond_miimon_commit(struct bonding *bond)
{
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
struct slave *slave, *primary;
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
switch (slave->new_link) {
case BOND_LINK_NOCHANGE:
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
case BOND_LINK_UP:
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
slave->last_link_up = jiffies;
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
primary = rtnl_dereference(bond->primary_slave);
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
/* prevent it from being the active one */
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
bond_set_backup_slave(slave);
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
/* make it immediately active */
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
bond_set_active_slave(slave);
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
} else if (slave != primary) {
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
/* prevent it from being the active one */
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
bond_set_backup_slave(slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status definitely up for interface %s, %u Mbps %s duplex\n",
slave->dev->name,
slave->speed == SPEED_UNKNOWN ? 0 : slave->speed,
slave->duplex ? "full" : "half");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
/* notify ad that the link status has changed */
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bond_3ad_handle_link_change(slave, BOND_LINK_UP);
bonding: Convert locks to _bh, rework alb locking for new locking Convert locking-related activity to new & improved system. Convert some lock acquisitions to _bh and rework parts of ALB mode, both to avoid deadlocks with workqueue activity. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:49 +08:00
bonding: add and use bond_is_lb() Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:07:13 +08:00
if (bond_is_lb(bond))
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bond_alb_handle_link_change(bond, slave,
BOND_LINK_UP);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
if (!bond->curr_active_slave || slave == primary)
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
goto do_failover;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
continue;
bonding: Convert locks to _bh, rework alb locking for new locking Convert locking-related activity to new & improved system. Convert some lock acquisitions to _bh and rework parts of ALB mode, both to avoid deadlocks with workqueue activity. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:49 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
case BOND_LINK_DOWN:
bonding: fix miimon failure counter During the rework of the mii monitor for: commit f0c76d61779b153dbfb955db3f144c62d02173c2 Author: Jay Vosburgh <fubar@us.ibm.com> Date: Wed Jul 2 18:21:58 2008 -0700 bonding: refactor mii monitor I left out the increment of the link failure counter. This patch corrects that omission. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 08:41:14 +08:00
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_NOW);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP ||
BOND_MODE(bond) == BOND_MODE_8023AD)
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status definitely down for interface %s, disabling it\n",
slave->dev->name);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bond_3ad_handle_link_change(slave,
BOND_LINK_DOWN);
bonding: use bond_is_lb() when it's appropriate Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27 13:42:36 +08:00
if (bond_is_lb(bond))
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bond_alb_handle_link_change(bond, slave,
BOND_LINK_DOWN);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (slave == rcu_access_pointer(bond->curr_active_slave))
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
goto do_failover;
continue;
default:
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond->dev, "invalid new link %d on slave %s\n",
slave->new_link, slave->dev->name);
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
slave->new_link = BOND_LINK_NOCHANGE;
continue;
}
do_failover:
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
block_netpoll_tx();
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
bond_select_active_slave(bond);
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
unblock_netpoll_tx();
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
}
bond_set_carrier(bond);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* bond_mii_monitor
bonding: Convert miimon to new locking Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:48 +08:00
*
* Really a wrapper that splits the mii monitor into two phases: an
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
* inspection, then (if inspection indicates something needs to be done)
* an acquisition of appropriate locks followed by a commit phase to
* implement whatever link state changes are indicated.
bonding: Convert miimon to new locking Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:48 +08:00
*/
bonding: make more functions static More functions in bonding that can be declared static because they are only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31 02:43:41 +08:00
static void bond_mii_monitor(struct work_struct *work)
bonding: Convert miimon to new locking Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:48 +08:00
{
struct bonding *bond = container_of(work, struct bonding,
mii_work.work);
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
bool should_notify_peers = false;
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
unsigned long delay;
bonding: Convert miimon to new locking Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:48 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
delay = msecs_to_jiffies(bond->params.miimon);
if (!bond_has_slaves(bond))
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
goto re_arm;
bonding: Rework / fix multiple gratuitous ARP support Support for sending multiple gratuitous ARPs during failovers was added by commit: commit 7893b2491a2d5f716540ac5643d78d37a7f6628b Author: Moni Shoua <monis@voltaire.com> Date: Sat May 17 21:10:12 2008 -0700 bonding: Send more than one gratuitous ARP when slave takes over This change modifies that support to remove duplicated code, add support for ARP monitor (the original only supported miimon), clear the grat ARP counter in bond_close (lest a later "ifconfig up" immediately start spewing ARPs), and add documentation for the module parameter. Also updated driver version to 3.3.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-14 09:12:03 +08:00
bonding: rebuild the lock use for bond_mii_monitor() The bond_mii_monitor() still use bond lock to protect bond slave list, it is no effect, I have 2 way to fix the problem, move the RTNL to the top of the function, or add RCU to protect the bond slave list, according to the Jay Vosburgh's opinion, 10 times one second is a truely big performance loss if use RTNL to protect the whole monitor, so I would take the advice and use RCU to protect the bond slave list. The bond_has_slave() will not protect by anything, there will no things happen if the slave list is be changed, unless the bond was free, but it will not happened before the monitor, the bond will closed before be freed. The peers notify for the bond will calling curr_active_slave, so derefence the slave to make sure we will accessing the same slave if the curr_active_slave changed, as the rcu dereference need in read-side critical sector and bond_change_active_slave() will call it with no RCU hold, so add peer notify in rcu_read_lock which will be nested in monitor. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:39 +08:00
rcu_read_lock();
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
should_notify_peers = bond_should_notify_peers(bond);
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
if (bond_miimon_inspect(bond)) {
bonding: rebuild the lock use for bond_mii_monitor() The bond_mii_monitor() still use bond lock to protect bond slave list, it is no effect, I have 2 way to fix the problem, move the RTNL to the top of the function, or add RCU to protect the bond slave list, according to the Jay Vosburgh's opinion, 10 times one second is a truely big performance loss if use RTNL to protect the whole monitor, so I would take the advice and use RCU to protect the bond slave list. The bond_has_slave() will not protect by anything, there will no things happen if the slave list is be changed, unless the bond was free, but it will not happened before the monitor, the bond will closed before be freed. The peers notify for the bond will calling curr_active_slave, so derefence the slave to make sure we will accessing the same slave if the curr_active_slave changed, as the rcu dereference need in read-side critical sector and bond_change_active_slave() will call it with no RCU hold, so add peer notify in rcu_read_lock which will be nested in monitor. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:39 +08:00
rcu_read_unlock();
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
/* Race avoidance with bond_close cancel of workqueue */
if (!rtnl_trylock()) {
delay = 1;
should_notify_peers = false;
goto re_arm;
}
bonding: remove bond read lock for bond_mii_monitor() The bond slave list may change when the monitor is running, the slave list is no longer protected by bond->lock, only protected by rtnl lock(), so we have 3 ways to modify it: 1.add bond_master_upper_dev_link() and bond_upper_dev_unlink() in bond->lock, but it is unsafe to call call_netdevice_notifiers() in write lock. 2.remove unused bond->lock for monitor function, only use the existing rtnl lock(). 3.use rcu_read_lock() to protect it, of course, it will transform bond_for_each_slave to bond_for_each_slave_rcu() and performance is better, but in slow path, it is ignored. so I remove the bond->lock and move the rtnl lock to protect the whole monitor function. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-24 11:09:03 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
bond_miimon_commit(bond);
rtnl_unlock(); /* might sleep, hold no other locks */
bonding: rebuild the lock use for bond_mii_monitor() The bond_mii_monitor() still use bond lock to protect bond slave list, it is no effect, I have 2 way to fix the problem, move the RTNL to the top of the function, or add RCU to protect the bond slave list, according to the Jay Vosburgh's opinion, 10 times one second is a truely big performance loss if use RTNL to protect the whole monitor, so I would take the advice and use RCU to protect the bond slave list. The bond_has_slave() will not protect by anything, there will no things happen if the slave list is be changed, unless the bond was free, but it will not happened before the monitor, the bond will closed before be freed. The peers notify for the bond will calling curr_active_slave, so derefence the slave to make sure we will accessing the same slave if the curr_active_slave changed, as the rcu dereference need in read-side critical sector and bond_change_active_slave() will call it with no RCU hold, so add peer notify in rcu_read_lock which will be nested in monitor. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:39 +08:00
} else
rcu_read_unlock();
bonding: Convert miimon to new locking Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:48 +08:00
bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03 09:21:58 +08:00
re_arm:
bonding: eliminate bond_close race conditions This patch resolves two sets of race conditions. Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> reported the first, as follows: The bond_close() calls cancel_delayed_work() to cancel delayed works. It, however, cannot cancel works that were already queued in workqueue. The bond_open() initializes work->data, and proccess_one_work() refers get_work_cwq(work)->wq->flags. The get_work_cwq() returns NULL when work->data has been initialized. Thus, a panic occurs. He included a patch that converted the cancel_delayed_work calls in bond_close to flush_delayed_work_sync, which eliminated the above problem. His patch is incorporated, at least in principle, into this patch. In this patch, we use cancel_delayed_work_sync in place of flush_delayed_work_sync, and also convert bond_uninit in addition to bond_close. This conversion to _sync, however, opens new races between bond_close and three periodically executing workqueue functions: bond_mii_monitor, bond_alb_monitor and bond_activebackup_arp_mon. The race occurs because bond_close and bond_uninit are always called with RTNL held, and these workqueue functions may acquire RTNL to perform failover-related activities. If bond_close or bond_uninit is waiting in cancel_delayed_work_sync, deadlock occurs. These deadlocks are resolved by having the workqueue functions acquire RTNL conditionally. If the rtnl_trylock() fails, the functions reschedule and return immediately. For the cases that are attempting to perform link failover, a delay of 1 is used; for the other cases, the normal interval is used (as those activities are not as time critical). Additionally, the bond_mii_monitor function now stores the delay in a variable (mimicing the structure of activebackup_arp_mon). Lastly, all of the above renders the kill_timers sentinel moot, and therefore it has been removed. Tested-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-28 23:42:50 +08:00
if (bond->params.miimon)
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
queue_delayed_work(bond->wq, &bond->mii_work, delay);
if (should_notify_peers) {
if (!rtnl_trylock())
return;
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev);
rtnl_unlock();
}
bonding: Convert miimon to new locking Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:48 +08:00
}
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
static bool bond_has_this_ip(struct bonding *bond, __be32 ip)
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
{
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
struct net_device *upper;
struct list_head *iter;
bool ret = false;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: remove entries for master_ip and vlan_ip and query devices instead The following patch aimed to resolve an issue where secondary, tertiary, etc. addresses added to bond interfaces could overwrite the bond->master_ip and vlan_ip values. commit 917fbdb32f37e9a93b00bb12ee83532982982df3 Author: Henrik Saavedra Persson <henrik.e.persson@ericsson.com> Date: Wed Nov 23 23:37:15 2011 +0000 bonding: only use primary address for ARP That patch was good because it prevented bonds using ARP monitoring from sending frames with an invalid source IP address. Unfortunately, it didn't always work as expected. When using an ioctl (like ifconfig does) to set the IP address and netmask, 2 separate ioctls are actually called to set the IP and netmask if the mask chosen doesn't match the standard mask for that class of address. The first ioctl did not have a mask that matched the one in the primary address and would still cause the device address to be overwritten. The second ioctl that was called to set the mask would then detect as secondary and ignored, but the damage was already done. This was not an issue when using an application that used netlink sockets as the setting of IP and netmask came down at once. The inconsistent behavior between those two interfaces was something that needed to be resolved. While I was thinking about how I wanted to resolve this, Ralf Zeidler came with a patch that resolved this on a RHEL kernel by keeping a full shadow of the entries in dev->ifa_list for the bonding device and vlan devices in the bonding driver. I didn't like the duplication of the list as I want to see the 'bonding' struct and code shrink rather than grow, but liked the general idea. As the Subject indicates this patch drops the master_ip and vlan_ip elements from the 'bonding' and 'vlan_entry' structs, respectively. This can be done because a device's address-list is now traversed to determine the optimal source IP address for ARP requests and for checks to see if the bonding device has a particular IP address. This code could have all be contained inside the bonding driver, but it made more sense to me to EXPORT and call inet_confirm_addr since it did exactly what was needed. I tested this and a backported patch and everything works as expected. Ralf also helped with verification of the backported patch. Thanks to Ralf for all his help on this. v2: Whitespace and organizational changes based on suggestions from Jay Vosburgh and Dave Miller. v3: Fixup incorrect usage of rcu_read_unlock based on Dave Miller's suggestion. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Ralf Zeidler <ralf.zeidler@nsn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-23 00:14:29 +08:00
if (ip == bond_confirm_addr(bond->dev, 0, ip))
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
return true;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
rcu_read_lock();
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:07 +08:00
netdev_for_each_all_upper_dev_rcu(bond->dev, upper, iter) {
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
if (ip == bond_confirm_addr(upper, 0, ip)) {
ret = true;
break;
}
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
}
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
rcu_read_unlock();
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: convert bond_has_this_ip() to use upper devices Currently, bond_has_this_ip() is aware only of vlan upper devices, and thus will return false if the address is associated with the upper bridge or any other device, and thus will break the arp logic. Fix this by using the upper device list. For every upper device we verify if the address associated with it is our address, and if yes - return true. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:11 +08:00
return ret;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* We go to the (large) trouble of VLAN tagging ARP frames because
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
* switches in VLAN mode (especially if ports are configured as
* "native" to a VLAN) might not pass non-tagged frames.
*/
bonding: support QinQ for bond arp interval The bond send arp request to indicate that the slave is active, and if the bond dev is a vlan dev, it will set the vlan tag in skb to notice the vlan group, but the bond could only send a skb with 802.1q proto, not support for QinQ. So add outer tag for lower vlan tag and inner tag for upper vlan tag to support QinQ, The new skb will be consist of two vlan tag just like this: dst mac | src mac | outer vlan tag | inner vlan tag | data | ..... If We don't need QinQ, the inner vlan tag could be set to 0 and use outer vlan tag as a normal vlan group. Using "ip link" to configure the bond for QinQ and add test log: ip link add link bond0 bond0.20 type vlan proto 802.1ad id 20 ip link add link bond0.20 bond0.20.200 type vlan proto 802.1q id 200 ifconfig bond0.20 11.11.20.36/24 ifconfig bond0.20.200 11.11.200.36/24 echo +11.11.200.37 > /sys/class/net/bond0/bonding/arp_ip_target 90:e2:ba:07:4a:5c (oui Unknown) > Broadcast, ethertype 802.1Q-QinQ (0x88a8),length 50: vlan 20, p 0,ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 11.11.200.37 tell 11.11.200.36, length 28 90:e2:ba:06:f9:86 (oui Unknown) > 90:e2:ba:07:4a:5c (oui Unknown), ethertype 802.1Q-QinQ (0x88a8), length 50: vlan 20, p 0, ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Reply 11.11.200.37 is-at 90:e2:ba:06:f9:86 (oui Unknown), length 28 v1->v2: remove the comment "TODO: QinQ?". Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:44:43 +08:00
static void bond_arp_send(struct net_device *slave_dev, int arp_op,
__be32 dest_ip, __be32 src_ip,
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
struct bond_vlan_tag *tags)
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
{
struct sk_buff *skb;
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
struct bond_vlan_tag *outer_tag = tags;
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(slave_dev, "arp %d on slave %s: dst %pI4 src %pI4\n",
arp_op, slave_dev->name, &dest_ip, &src_ip);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
NULL, slave_dev->dev_addr, NULL);
if (!skb) {
bonding: add net_ratelimt to avoid spam in arp interval Remove the unnecessary log and add net_ratelimit to the others, in order to avoid spam the log. Cc: Joe Perches <joe@perches.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:44:44 +08:00
net_err_ratelimited("ARP packet allocation failed\n");
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
return;
}
bonding: support QinQ for bond arp interval The bond send arp request to indicate that the slave is active, and if the bond dev is a vlan dev, it will set the vlan tag in skb to notice the vlan group, but the bond could only send a skb with 802.1q proto, not support for QinQ. So add outer tag for lower vlan tag and inner tag for upper vlan tag to support QinQ, The new skb will be consist of two vlan tag just like this: dst mac | src mac | outer vlan tag | inner vlan tag | data | ..... If We don't need QinQ, the inner vlan tag could be set to 0 and use outer vlan tag as a normal vlan group. Using "ip link" to configure the bond for QinQ and add test log: ip link add link bond0 bond0.20 type vlan proto 802.1ad id 20 ip link add link bond0.20 bond0.20.200 type vlan proto 802.1q id 200 ifconfig bond0.20 11.11.20.36/24 ifconfig bond0.20.200 11.11.200.36/24 echo +11.11.200.37 > /sys/class/net/bond0/bonding/arp_ip_target 90:e2:ba:07:4a:5c (oui Unknown) > Broadcast, ethertype 802.1Q-QinQ (0x88a8),length 50: vlan 20, p 0,ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 11.11.200.37 tell 11.11.200.36, length 28 90:e2:ba:06:f9:86 (oui Unknown) > 90:e2:ba:07:4a:5c (oui Unknown), ethertype 802.1Q-QinQ (0x88a8), length 50: vlan 20, p 0, ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Reply 11.11.200.37 is-at 90:e2:ba:06:f9:86 (oui Unknown), length 28 v1->v2: remove the comment "TODO: QinQ?". Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:44:43 +08:00
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
if (!tags || tags->vlan_proto == VLAN_N_VID)
goto xmit;
tags++;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
/* Go through all the tags backwards and add them to the packet */
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
while (tags->vlan_proto != VLAN_N_VID) {
if (!tags->vlan_id) {
tags++;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
continue;
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
}
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(slave_dev, "inner tag: proto %X vid %X\n",
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
ntohs(outer_tag->vlan_proto), tags->vlan_id);
vlan: rename __vlan_put_tag to vlan_insert_tag_set_proto Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-19 21:04:58 +08:00
skb = vlan_insert_tag_set_proto(skb, tags->vlan_proto,
tags->vlan_id);
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
if (!skb) {
net_err_ratelimited("failed to insert inner VLAN tag\n");
return;
}
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
tags++;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
}
/* Set the outer tag */
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
if (outer_tag->vlan_id) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(slave_dev, "outer tag: proto %X vid %X\n",
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
ntohs(outer_tag->vlan_proto), outer_tag->vlan_id);
vlan: kill vlan_put_tag helper Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-19 21:04:57 +08:00
__vlan_hwaccel_put_tag(skb, outer_tag->vlan_proto,
outer_tag->vlan_id);
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
}
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
xmit:
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
arp_xmit(skb);
}
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
/* Validate the device path between the @start_dev and the @end_dev.
* The path is valid if the @end_dev is reachable through device
* stacking.
* When the path is validated, collect any vlan information in the
* path.
*/
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev,
struct net_device *end_dev,
int level)
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
{
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
struct bond_vlan_tag *tags;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
struct net_device *upper;
struct list_head *iter;
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
if (start_dev == end_dev) {
tags = kzalloc(sizeof(*tags) * (level + 1), GFP_ATOMIC);
if (!tags)
return ERR_PTR(-ENOMEM);
tags[level].vlan_proto = VLAN_N_VID;
return tags;
}
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
netdev_for_each_upper_dev_rcu(start_dev, upper, iter) {
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
tags = bond_verify_device_path(upper, end_dev, level + 1);
if (IS_ERR_OR_NULL(tags)) {
if (IS_ERR(tags))
return tags;
continue;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
}
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
if (is_vlan_dev(upper)) {
tags[level].vlan_proto = vlan_dev_vlan_proto(upper);
tags[level].vlan_id = vlan_dev_vlan_id(upper);
}
return tags;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
}
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
return NULL;
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
}
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
{
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
struct rtable *rt;
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
struct bond_vlan_tag *tags;
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
__be32 *targets = bond->params.arp_targets, addr;
bonding: support QinQ for bond arp interval The bond send arp request to indicate that the slave is active, and if the bond dev is a vlan dev, it will set the vlan tag in skb to notice the vlan group, but the bond could only send a skb with 802.1q proto, not support for QinQ. So add outer tag for lower vlan tag and inner tag for upper vlan tag to support QinQ, The new skb will be consist of two vlan tag just like this: dst mac | src mac | outer vlan tag | inner vlan tag | data | ..... If We don't need QinQ, the inner vlan tag could be set to 0 and use outer vlan tag as a normal vlan group. Using "ip link" to configure the bond for QinQ and add test log: ip link add link bond0 bond0.20 type vlan proto 802.1ad id 20 ip link add link bond0.20 bond0.20.200 type vlan proto 802.1q id 200 ifconfig bond0.20 11.11.20.36/24 ifconfig bond0.20.200 11.11.200.36/24 echo +11.11.200.37 > /sys/class/net/bond0/bonding/arp_ip_target 90:e2:ba:07:4a:5c (oui Unknown) > Broadcast, ethertype 802.1Q-QinQ (0x88a8),length 50: vlan 20, p 0,ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 11.11.200.37 tell 11.11.200.36, length 28 90:e2:ba:06:f9:86 (oui Unknown) > 90:e2:ba:07:4a:5c (oui Unknown), ethertype 802.1Q-QinQ (0x88a8), length 50: vlan 20, p 0, ethertype 802.1Q, vlan 200, p 0, ethertype ARP, Ethernet (len 6), IPv4 (len 4), Reply 11.11.200.37 is-at 90:e2:ba:06:f9:86 (oui Unknown), length 28 v1->v2: remove the comment "TODO: QinQ?". Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:44:43 +08:00
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "basa: target %pI4\n", &targets[i]);
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
tags = NULL;
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
/* Find out through which dev should the packet go */
ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 13:00:52 +08:00
rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
RTO_ONLINK, 0);
ipv4: Make output route lookup return rtable directly. Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 06:31:35 +08:00
if (IS_ERR(rt)) {
bonding: send arp requests even if there's no route to them Currently we're only sending arp requests if we have a route to the target (and, thus, can find out the source ip address). There are some use cases, however, where we don't want/need to set an ip address (or set up a specific route) for bonding to use arp monitoring *for traffic generation*. We can easily send arp probes (arp requests with src ip == 0) to generate arp broadcast responses from the target ip and use them for determining if the target is up. This, obviously, won't work with arp validation - because we don't have the ip address set and, thus, will filter out the responses. So in that case - print a warning. CC: François CACHEREUL <f.cachereul@alphalink.fr> CC: Zhenjie Chen <zhchen@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28 19:39:19 +08:00
/* there's no route to target - try to send arp
* probe to generate any traffic (arp_validate=0)
*/
bonding: add net_ratelimt to avoid spam in arp interval Remove the unnecessary log and add net_ratelimit to the others, in order to avoid spam the log. Cc: Joe Perches <joe@perches.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:44:44 +08:00
if (bond->params.arp_validate)
net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
bond->dev->name,
&targets[i]);
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
0, tags);
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
continue;
}
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
/* bond device itself */
if (rt->dst.dev == bond->dev)
goto found;
rcu_read_lock();
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
tags = bond_verify_device_path(bond->dev, rt->dst.dev, 0);
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
rcu_read_unlock();
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
bonding: make it possible to have unlimited nested upper vlans Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 23:02:23 +08:00
if (!IS_ERR_OR_NULL(tags))
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
goto found;
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
/* Not our device - skip */
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "no path to arp_ip_target %pI4 via rt.dev %s\n",
&targets[i], rt->dst.dev ? rt->dst.dev->name : "NULL");
bonding: pr_debug instead of pr_warn in bond_arp_send_all They're simply annoying and will spam dmesg constantly if we hit them, so convert to pr_debug so that we still can access them in case of debugging. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:16 +08:00
[PATCH] bonding: plug reference count leak Bonding leaks route structures when the ARP monitor is configured to send probes over VLANs. Originally reported by Ian Abel <ian.abel@mxtelecom.com>; his original fix was modified by Jay Vosburgh to correct coding style and to close a leak it missed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-15 05:52:09 +08:00
ip_rt_put(rt);
bonding: make bond_arp_send_all use upper device list Currently, bond_arp_send_all() is aware only of vlans, which breaks configurations like bond <- bridge (or any other 'upper' device) with IP (which is quite a common scenario for virt setups). To fix this we convert the bond_arp_send_all() to first verify if the rt device is the bond itself, and if not - to go through its list of upper vlans and their respectiv upper devices (if the vlan's upper device matches - tag the packet), if still not found - go through all of our upper list devices to see if any of them match the route device for the target. If the match is a vlan device - we also save its vlan_id and tag it in bond_arp_send(). Also, clean the function a bit to be more readable. CC: Vlad Yasevich <vyasevic@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 05:25:10 +08:00
continue;
found:
addr = bond_confirm_addr(rt->dst.dev, targets[i], 0);
ip_rt_put(rt);
bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17 05:20:38 +08:00
addr, tags);
bonding: fix a memory leak in bond_arp_send_all() This test is reversed so the memory is always leaked. It's better style to remove the test anyway. Fixes: 3e403a77779f ('bonding: make it possible to have unlimited nested upper vlans') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-25 20:21:21 +08:00
kfree(tags);
bonding: gratuitous ARP Add support for generating gratuitous ARPs in bonding active-backup mode when failovers occur. Includes support for VLAN tagging the ARPs as needed. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:52:20 +08:00
}
}
endianness annotations drivers/net/bonding/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 08:06:58 +08:00
static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
{
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
int i;
bonding: add helper function bond_get_targets_ip(targets, ip) Add function bond_get_targets_ip(targets, ip) which searches through targets array of ips (arp_targets) and returns the position of first match. If ip == 0, returns the first free slot. On failure to find the ip or free slot, return -1. Use it to verify if the arp we've received is valid and in sysfs. v1->v2: Fix "[2/6] bonding: add helper function bond_get_targets_ip(targets, ip)", per Nikolay's advice, to verify if source ip != 0.0.0.0, otherwise we might update 'null' arp_ip_targets' last_rx. Also, address style. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:29 +08:00
if (!sip || !bond_has_this_ip(bond, tip)) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "bva: sip %pI4 tip %pI4 not found\n",
&sip, &tip);
bonding: add helper function bond_get_targets_ip(targets, ip) Add function bond_get_targets_ip(targets, ip) which searches through targets array of ips (arp_targets) and returns the position of first match. If ip == 0, returns the first free slot. On failure to find the ip or free slot, return -1. Use it to verify if the arp we've received is valid and in sysfs. v1->v2: Fix "[2/6] bonding: add helper function bond_get_targets_ip(targets, ip)", per Nikolay's advice, to verify if source ip != 0.0.0.0, otherwise we might update 'null' arp_ip_targets' last_rx. Also, address style. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:29 +08:00
return;
}
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
i = bond_get_targets_ip(bond->params.arp_targets, sip);
if (i == -1) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "bva: sip %pI4 not found in targets\n",
&sip);
bonding: add helper function bond_get_targets_ip(targets, ip) Add function bond_get_targets_ip(targets, ip) which searches through targets array of ips (arp_targets) and returns the position of first match. If ip == 0, returns the first free slot. On failure to find the ip or free slot, return -1. Use it to verify if the arp we've received is valid and in sysfs. v1->v2: Fix "[2/6] bonding: add helper function bond_get_targets_ip(targets, ip)", per Nikolay's advice, to verify if source ip != 0.0.0.0, otherwise we might update 'null' arp_ip_targets' last_rx. Also, address style. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:29 +08:00
return;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
}
bonding: rename last_arp_rx to last_rx To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:47 +08:00
slave->last_rx = jiffies;
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
slave->target_last_arp_rx[i] = jiffies;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
}
bonding: fix bond_arp_rcv setting and arp validate desync state We make bond_arp_rcv global so it can be used in bond_sysfs if the bond interface is up and arp_interval is being changed to a positive value and cleared otherwise as per Jay's suggestion. This also fixes a problem where bond_arp_rcv was set even though arp_validate was disabled while the bond was up by unsetting recv_probe in bond_store_arp_validate and respectively setting it if enabled. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-07 06:00:26 +08:00
int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
struct slave *slave)
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
{
bonding: remove packet cloning in recv_probe() Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 03:23:07 +08:00
struct arphdr *arp = (struct arphdr *)skb->data;
bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-03 05:35:56 +08:00
struct slave *curr_active_slave, *curr_arp_slave;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
unsigned char *arp_ptr;
endianness annotations drivers/net/bonding/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 08:06:58 +08:00
__be32 sip, tip;
bonding: use the new options to correctly set last_arp_rx Now that the options are in place - arp_validate can be set to receive all the traffic or only arp packets to verify if the slave is up, when the slave isn't validated. CC: Rob Landley <rob@landley.net> CC: "David S. Miller" <davem@davemloft.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:42 +08:00
int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP);
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: use the new options to correctly set last_arp_rx Now that the options are in place - arp_validate can be set to receive all the traffic or only arp packets to verify if the slave is up, when the slave isn't validated. CC: Rob Landley <rob@landley.net> CC: "David S. Miller" <davem@davemloft.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:42 +08:00
if (!slave_do_arp_validate(bond, slave)) {
bonding: simplify the slave_do_arp_validate_only() The argument slave is not used for slave_do_arp_validate_only(), so no need to keep it, make the function more simple. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07 22:10:20 +08:00
if ((slave_do_arp_validate_only(bond) && is_arp) ||
!slave_do_arp_validate_only(bond))
bonding: rename last_arp_rx to last_rx To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:47 +08:00
slave->last_rx = jiffies;
bonding: don't increase rx_dropped after processing LACPDUs Since commit 3aba891d, bonding processes LACP frames (802.3ad mode) with bond_handle_frame(). Currently a copy of the skb is made and the original is left to be processed by other rx_handlers and the rest of the network stack by returning RX_HANDLER_ANOTHER. As there is no protocol handler for PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped increased. Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED if bonding has processed the LACP frame. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 09:01:40 +08:00
return RX_HANDLER_ANOTHER;
bonding: use the new options to correctly set last_arp_rx Now that the options are in place - arp_validate can be set to receive all the traffic or only arp packets to verify if the slave is up, when the slave isn't validated. CC: Rob Landley <rob@landley.net> CC: "David S. Miller" <davem@davemloft.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:42 +08:00
} else if (!is_arp) {
return RX_HANDLER_ANOTHER;
}
bonding: don't validate arp if we don't have to Currently, we validate all the incoming arps if arp_validate not 0. However, we don't have to validate backup slaves if arp_validate == active and vice versa, so return early in bond_arp_rcv() in these cases. It works correctly now because we verify arp_validate in slave_last_rx(), however we're just doing useless work in bond_arp_rcv(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:31 +08:00
bonding: remove packet cloning in recv_probe() Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 03:23:07 +08:00
alen = arp_hdr_len(bond->dev);
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "bond_arp_rcv: skb->dev %s\n",
skb->dev->name);
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: remove packet cloning in recv_probe() Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 03:23:07 +08:00
if (alen > skb_headlen(skb)) {
arp = kmalloc(alen, GFP_ATOMIC);
if (!arp)
goto out_unlock;
if (skb_copy_bits(skb, 0, arp, alen) < 0)
goto out_unlock;
}
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
if (arp->ar_hln != bond->dev->addr_len ||
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
skb->pkt_type == PACKET_OTHERHOST ||
skb->pkt_type == PACKET_LOOPBACK ||
arp->ar_hrd != htons(ARPHRD_ETHER) ||
arp->ar_pro != htons(ETH_P_IP) ||
arp->ar_pln != 4)
goto out_unlock;
arp_ptr = (unsigned char *)(arp + 1);
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
arp_ptr += bond->dev->addr_len;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
memcpy(&sip, arp_ptr, 4);
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
arp_ptr += 4 + bond->dev->addr_len;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
memcpy(&tip, arp_ptr, 4);
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond->dev, "bond_arp_rcv: %s/%d av %d sv %d sip %pI4 tip %pI4\n",
slave->dev->name, bond_slave_state(slave),
bond->params.arp_validate, slave_do_arp_validate(bond, slave),
&sip, &tip);
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: fix bond_arp_rcv() race of curr_active_slave bond->curr_active_slave can be changed between its deferences, even to NULL, and thus we might panic. We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv()) so fix this by rcu_dereferencing() it and using the saved. Reported-by: Ding Tianhong <dingtianhong@huawei.com> Fixes: aeea64a ("bonding: don't trust arp requests unless active slave really works") CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-20 19:07:57 +08:00
curr_active_slave = rcu_dereference(bond->curr_active_slave);
bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-03 05:35:56 +08:00
curr_arp_slave = rcu_dereference(bond->current_arp_slave);
bonding: fix bond_arp_rcv() race of curr_active_slave bond->curr_active_slave can be changed between its deferences, even to NULL, and thus we might panic. We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv()) so fix this by rcu_dereferencing() it and using the saved. Reported-by: Ding Tianhong <dingtianhong@huawei.com> Fixes: aeea64a ("bonding: don't trust arp requests unless active slave really works") CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-20 19:07:57 +08:00
bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-03 05:35:56 +08:00
/* We 'trust' the received ARP enough to validate it if:
bonding: don't trust arp requests unless active slave really works Currently, if we receive any arp packet on a backup slave in active-backup mode and arp_validate enabled, we suppose that it's an arp request, swap source/target ip and try to validate it. This optimization gives us virtually no downtime in the most common situation (active and backup slaves are in the same broadcast domain and the active slave failed). However, if we can't reach the arp_ip_target(s), we end up in an endless loop of reselecting slaves, because we receive our arp requests, sent by the active slave, and think that backup slaves are up, thus selecting them as active and, again, sending arp requests, which fool our backup slaves. Fix this by not validating the swapped arp packets if the current active slave didn't receive any arp reply after it was selected as active. This way we will only accept arp requests if we know that the current active slave can actually reach arp_ip_target. v3->v4: Obey 80 lines and make checkpatch.pl happy, per Sergei's suggestion. v1->v3: No change. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:32 +08:00
*
bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-03 05:35:56 +08:00
* (a) the slave receiving the ARP is active (which includes the
* current ARP slave, if any), or
*
* (b) the receiving slave isn't active, but there is a currently
* active slave and it received valid arp reply(s) after it became
* the currently active slave, or
*
* (c) there is an ARP slave that sent an ARP during the prior ARP
* interval, and we receive an ARP reply on any slave. We accept
* these because switch FDB update delays may deliver the ARP
* reply to a slave other than the sender of the ARP request.
*
* Note: for (b), backup slaves are receiving the broadcast ARP
* request, not a reply. This request passes from the sending
* slave through the L2 switch(es) to the receiving slave. Since
* this is checking the request, sip/tip are swapped for
* validation.
*
* This is done to avoid endless looping when we can't reach the
bonding: don't trust arp requests unless active slave really works Currently, if we receive any arp packet on a backup slave in active-backup mode and arp_validate enabled, we suppose that it's an arp request, swap source/target ip and try to validate it. This optimization gives us virtually no downtime in the most common situation (active and backup slaves are in the same broadcast domain and the active slave failed). However, if we can't reach the arp_ip_target(s), we end up in an endless loop of reselecting slaves, because we receive our arp requests, sent by the active slave, and think that backup slaves are up, thus selecting them as active and, again, sending arp requests, which fool our backup slaves. Fix this by not validating the swapped arp packets if the current active slave didn't receive any arp reply after it was selected as active. This way we will only accept arp requests if we know that the current active slave can actually reach arp_ip_target. v3->v4: Obey 80 lines and make checkpatch.pl happy, per Sergei's suggestion. v1->v3: No change. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:32 +08:00
* arp_ip_target and fool ourselves with our own arp requests.
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
*/
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
if (bond_is_active_slave(slave))
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bond_validate_arp(bond, slave, sip, tip);
bonding: fix bond_arp_rcv() race of curr_active_slave bond->curr_active_slave can be changed between its deferences, even to NULL, and thus we might panic. We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv()) so fix this by rcu_dereferencing() it and using the saved. Reported-by: Ding Tianhong <dingtianhong@huawei.com> Fixes: aeea64a ("bonding: don't trust arp requests unless active slave really works") CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-20 19:07:57 +08:00
else if (curr_active_slave &&
time_after(slave_last_rx(bond, curr_active_slave),
curr_active_slave->last_link_up))
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bond_validate_arp(bond, slave, tip, sip);
bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-03 05:35:56 +08:00
else if (curr_arp_slave && (arp->ar_op == htons(ARPOP_REPLY)) &&
bond_time_in_interval(bond,
dev_trans_start(curr_arp_slave->dev), 1))
bond_validate_arp(bond, slave, sip, tip);
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
out_unlock:
bonding: remove packet cloning in recv_probe() Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 03:23:07 +08:00
if (arp != (struct arphdr *)skb->data)
kfree(arp);
bonding: don't increase rx_dropped after processing LACPDUs Since commit 3aba891d, bonding processes LACP frames (802.3ad mode) with bond_handle_frame(). Currently a copy of the skb is made and the original is left to be processed by other rx_handlers and the rest of the network stack by returning RX_HANDLER_ANOTHER. As there is no protocol handler for PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped increased. Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED if bonding has processed the LACP frame. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09 09:01:40 +08:00
return RX_HANDLER_ANOTHER;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
}
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
/* function to verify if we're in the arp_interval timeslice, returns true if
* (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval +
* arp_interval/2) . the arp_interval/2 is needed for really fast networks.
*/
static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
int mod)
{
int delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
return time_in_range(jiffies,
last_act - delta_in_ticks,
last_act + mod * delta_in_ticks + delta_in_ticks/2);
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* This function is called regularly to monitor each slave's link
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* ensuring that traffic is being sent and received when arp monitoring
* is used in load-balancing mode. if the adapter has been dormant, then an
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
* arp monitoring in active backup mode.
*/
bonding: make more functions static More functions in bonding that can be declared static because they are only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31 02:43:41 +08:00
static void bond_loadbalance_arp_mon(struct work_struct *work)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
Convert bonding timers to workqueues Convert bonding timers to workqueues. This converts the various monitor functions to run in periodic work queues instead of timers. This patch introduces the framework and convers the calls, but does not resolve various locking issues, and does not stand alone. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:45 +08:00
struct bonding *bond = container_of(work, struct bonding,
arp_work.work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct slave *slave, *oldcurrent;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: fix locking in bond_loadbalance_arp_mon() The commit 1d3ee88ae0d605629bf369 (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28 11:48:53 +08:00
int do_failover = 0, slave_state_changed = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
if (!bond_has_slaves(bond))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto re_arm;
bonding: rebuild the lock use for bond_loadbalance_arp_mon() The bond_loadbalance_arp_mon() use the bond lock to protect the bond slave list, it is no effect, so I could use RTNL or RCU to replace it, considering the performance impact, the RCU is more better here, so the bond lock replace with the RCU. The bond_select_active_slave() need RTNL and curr_slave_lock together, but there is no RTNL lock here, so add a rtnl_rtylock. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:50 +08:00
rcu_read_lock();
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
oldcurrent = rcu_dereference(bond->curr_active_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* see if any of the previous devices are up now (i.e. they have
* xmt and rcv traffic). the curr_active_slave does not come into
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
* the picture unless it is null. also, slave->last_link_up is not
* needed here because we send an arp on each slave and give a slave
* as long as it needs to get the tx/rx within the delta.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* TODO: what about up/down delay in arp mode? it wasn't here before
* so it can wait
*/
bonding: rebuild the lock use for bond_loadbalance_arp_mon() The bond_loadbalance_arp_mon() use the bond lock to protect the bond slave list, it is no effect, so I could use RTNL or RCU to replace it, considering the performance impact, the RCU is more better here, so the bond lock replace with the RCU. The bond_select_active_slave() need RTNL and curr_slave_lock together, but there is no RTNL lock here, so add a rtnl_rtylock. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:50 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: Fix jiffies overflow problems (again) The time_before_eq()/time_after_eq() functions operate on unsigned long and only work if the difference between the two compared values is smaller than half the range of unsigned long (31 bits on i386). Some of the variables (slave->jiffies, dev->trans_start, dev->last_rx) used by bonding store a copy of jiffies and may not be updated for a long time. With HZ=1000, time_before_eq()/time_after_eq() will start giving bad results after ~25 days. jiffies will never be before slave->jiffies, dev->trans_start, dev->last_rx by more than possibly a couple ticks caused by preemption of this code. This allows us to detect/prevent these overflows by replacing time_before_eq()/time_after_eq() with time_in_range(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02 13:45:54 +08:00
unsigned long trans_start = dev_trans_start(slave->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (slave->link != BOND_LINK_UP) {
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
if (bond_time_in_interval(bond, trans_start, 1) &&
bonding: rename last_arp_rx to last_rx To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:47 +08:00
bond_time_in_interval(bond, slave->last_rx, 1)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
slave->link = BOND_LINK_UP;
bonding: fix locking in bond_loadbalance_arp_mon() The commit 1d3ee88ae0d605629bf369 (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28 11:48:53 +08:00
slave_state_changed = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* primary_slave has no meaning in round-robin
* mode. the window of a slave being up and
* curr_active_slave being null after enslaving
* is closed.
*/
if (!oldcurrent) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status definitely up for interface %s\n",
slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
do_failover = 1;
} else {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "interface %s is now up\n",
slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
} else {
/* slave->link == BOND_LINK_UP */
/* not all switches will respond to an arp request
* when the source ip is 0, so don't take the link down
* if we don't know our ip yet
*/
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
if (!bond_time_in_interval(bond, trans_start, 2) ||
bonding: rename last_arp_rx to last_rx To reflect the new meaning. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:47 +08:00
!bond_time_in_interval(bond, slave->last_rx, 2)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
slave->link = BOND_LINK_DOWN;
bonding: fix locking in bond_loadbalance_arp_mon() The commit 1d3ee88ae0d605629bf369 (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28 11:48:53 +08:00
slave_state_changed = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (slave->link_failure_count < UINT_MAX)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
slave->link_failure_count++;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "interface %s is now down\n",
slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (slave == oldcurrent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
do_failover = 1;
}
}
/* note: if switch is in round-robin mode, all links
* must tx arp to ensure all links rx an arp - otherwise
* links may oscillate or not come up at all; if switch is
* in something like xor mode, there is nothing we can
* do - all replies will be rx'ed on same link causing slaves
* to be unstable during low/no traffic periods
*/
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (bond_slave_is_up(slave))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_arp_send_all(bond, slave);
}
bonding: rebuild the lock use for bond_loadbalance_arp_mon() The bond_loadbalance_arp_mon() use the bond lock to protect the bond slave list, it is no effect, so I could use RTNL or RCU to replace it, considering the performance impact, the RCU is more better here, so the bond lock replace with the RCU. The bond_select_active_slave() need RTNL and curr_slave_lock together, but there is no RTNL lock here, so add a rtnl_rtylock. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:50 +08:00
rcu_read_unlock();
bonding: fix locking in bond_loadbalance_arp_mon() The commit 1d3ee88ae0d605629bf369 (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28 11:48:53 +08:00
if (do_failover || slave_state_changed) {
bonding: rebuild the lock use for bond_loadbalance_arp_mon() The bond_loadbalance_arp_mon() use the bond lock to protect the bond slave list, it is no effect, so I could use RTNL or RCU to replace it, considering the performance impact, the RCU is more better here, so the bond lock replace with the RCU. The bond_select_active_slave() need RTNL and curr_slave_lock together, but there is no RTNL lock here, so add a rtnl_rtylock. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:50 +08:00
if (!rtnl_trylock())
goto re_arm;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix locking in bond_loadbalance_arp_mon() The commit 1d3ee88ae0d605629bf369 (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28 11:48:53 +08:00
if (slave_state_changed) {
bond_slave_state_change(bond);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
bonding: fix curr_active_slave/carrier with loadbalance arp monitoring Since commit 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") we can have a stale bond carrier state and stale curr_active_slave when using arp monitoring in loadbalance modes. The reason is that in bond_loadbalance_arp_mon() we can't have do_failover == true but slave_state_changed == false, whenever do_failover is true then slave_state_changed is also true. Then the following piece from bond_loadbalance_arp_mon(): if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) bond_update_slave_arr(bond, NULL); } else if (do_failover) { block_netpoll_tx(); bond_select_active_slave(bond); unblock_netpoll_tx(); } will execute only the first branch, always and regardless of do_failover. Since these two events aren't related in such way, we need to decouple and consider them separately. For example this issue could lead to the following result: Bonding Mode: load balancing (round-robin) *MII Status: down* MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 100 ARP IP target/s (n.n.n.n form): 192.168.9.2 Slave Interface: ens12 *MII Status: up* Speed: 10000 Mbps Duplex: full Link Failure Count: 2 Permanent HW addr: 00:0f:53:01:42:2c Slave queue ID: 0 Slave Interface: eth1 *MII Status: up* Speed: Unknown Duplex: Unknown Link Failure Count: 70 Permanent HW addr: 52:54:00:2f:0f:8e Slave queue ID: 0 Since some interfaces are up, then the status of the bond should also be up, but it will never change unless something invokes bond_set_carrier() (i.e. enslave, bond_select_active_slave etc). Now, if I force the calling of bond_select_active_slave via for example changing primary_reselect (it can change in any mode), then the MII status goes to "up" because it calls bond_select_active_slave() which should've been done from bond_loadbalance_arp_mon() itself. CC: Veaceslav Falico <vfalico@gmail.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> Fixes: 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18 22:14:44 +08:00
}
if (do_failover) {
bonding: fix locking in bond_loadbalance_arp_mon() The commit 1d3ee88ae0d605629bf369 (bonding: add netlink attributes to slave link dev) has add rtmsg_ifinfo() in bond_set_active_slave() and bond_set_backup_slave(), so the two function need to called in RTNL lock, but bond_loadbalance_arp_mon() only calling these functions in RCU, warning message will occurs. fix this by add a new function bond_slave_state_change(), which will reset the slave's state after slave link check, so remove the bond_set_xxx_slave() from the cycle and only record the slave_state_changed, this will call the new function to set all slaves to new state in RTNL later. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28 11:48:53 +08:00
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
bonding: rebuild the lock use for bond_loadbalance_arp_mon() The bond_loadbalance_arp_mon() use the bond lock to protect the bond slave list, it is no effect, so I could use RTNL or RCU to replace it, considering the performance impact, the RCU is more better here, so the bond lock replace with the RCU. The bond_select_active_slave() need RTNL and curr_slave_lock together, but there is no RTNL lock here, so add a rtnl_rtylock. Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:19:50 +08:00
rtnl_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
re_arm:
bonding: eliminate bond_close race conditions This patch resolves two sets of race conditions. Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> reported the first, as follows: The bond_close() calls cancel_delayed_work() to cancel delayed works. It, however, cannot cancel works that were already queued in workqueue. The bond_open() initializes work->data, and proccess_one_work() refers get_work_cwq(work)->wq->flags. The get_work_cwq() returns NULL when work->data has been initialized. Thus, a panic occurs. He included a patch that converted the cancel_delayed_work calls in bond_close to flush_delayed_work_sync, which eliminated the above problem. His patch is incorporated, at least in principle, into this patch. In this patch, we use cancel_delayed_work_sync in place of flush_delayed_work_sync, and also convert bond_uninit in addition to bond_close. This conversion to _sync, however, opens new races between bond_close and three periodically executing workqueue functions: bond_mii_monitor, bond_alb_monitor and bond_activebackup_arp_mon. The race occurs because bond_close and bond_uninit are always called with RTNL held, and these workqueue functions may acquire RTNL to perform failover-related activities. If bond_close or bond_uninit is waiting in cancel_delayed_work_sync, deadlock occurs. These deadlocks are resolved by having the workqueue functions acquire RTNL conditionally. If the rtnl_trylock() fails, the functions reschedule and return immediately. For the cases that are attempting to perform link failover, a delay of 1 is used; for the other cases, the normal interval is used (as those activities are not as time critical). Additionally, the bond_mii_monitor function now stores the delay in a variable (mimicing the structure of activebackup_arp_mon). Lastly, all of the above renders the kill_timers sentinel moot, and therefore it has been removed. Tested-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-28 23:42:50 +08:00
if (bond->params.arp_interval)
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
queue_delayed_work(bond->wq, &bond->arp_work,
msecs_to_jiffies(bond->params.arp_interval));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Called to inspect slaves for active-backup mode ARP monitor link state
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
* changes. Sets new_link in slaves to specify what action should take
* place for the slave. Returns 0 if no changes are found, >0 if changes
* to link states must be committed.
*
bonding: adjust locking comments Now that locks have been removed, remove some unnecessary comments and adjust others to reflect reality. Also add a comment to "mode_lock" to describe its current users and give a brief summary why they need it. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:28 +08:00
* Called with rcu_read_lock held.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
static int bond_ab_arp_inspect(struct bonding *bond)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: call slave_last_rx() only once per slave Simple cleanup to not call slave_last_rx() on every time function. It won't give any measurable boost - but looks cleaner and easier to understand. There are no time-consuming functions in between these calls, so it's safe to call it in the beginning only once. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:35 +08:00
unsigned long trans_start, last_rx;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
struct slave *slave;
int commit = 0;
bonding: add some slack to arp monitoring time limits Currently, all the time limits in the bonding ARP monitor are in multiples of arp_interval -- the time interval at which the ARP monitor is periodically scheduled. With a fast network round-trip and a little scheduling latency of the ARP monitor work, a limit of n*delta_in_ticks may effectively mean (n-1)*delta_in_ticks. This is fatal in case of n==1 (the link will stay down forever) and makes the behaviour non-deterministic in all the other cases. Add a delta_in_ticks/2 time slack to all the time limits. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 20:02:47 +08:00
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
slave->new_link = BOND_LINK_NOCHANGE;
bonding: call slave_last_rx() only once per slave Simple cleanup to not call slave_last_rx() on every time function. It won't give any measurable boost - but looks cleaner and easier to understand. There are no time-consuming functions in between these calls, so it's safe to call it in the beginning only once. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:35 +08:00
last_rx = slave_last_rx(bond, slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
if (slave->link != BOND_LINK_UP) {
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
if (bond_time_in_interval(bond, last_rx, 1)) {
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
slave->new_link = BOND_LINK_UP;
commit++;
}
continue;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Give slaves 2*delta after being enslaved or made
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
* active. This avoids bouncing, as the last receive
* times need a full ARP monitor cycle to be updated.
*/
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
if (bond_time_in_interval(bond, slave->last_link_up, 2))
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
continue;
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Backup slave is down if:
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
* - No current_arp_slave AND
* - more than 3*delta since last receive AND
* - the bond has an IP address
*
* Note: a non-null current_arp_slave indicates
* the curr_active_slave went down and we are
* searching for a new one; under this condition
* we only take the curr_active_slave down - this
* gives each slave a chance to tx/rx traffic
* before being taken out
*/
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
if (!bond_is_active_slave(slave) &&
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
!rcu_access_pointer(bond->current_arp_slave) &&
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
!bond_time_in_interval(bond, last_rx, 3)) {
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
slave->new_link = BOND_LINK_DOWN;
commit++;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Active slave is down if:
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
* - more than 2*delta since transmitting OR
* - (more than 2*delta since receive AND
* the bond has an IP address)
*/
bonding: Fix jiffies overflow problems (again) The time_before_eq()/time_after_eq() functions operate on unsigned long and only work if the difference between the two compared values is smaller than half the range of unsigned long (31 bits on i386). Some of the variables (slave->jiffies, dev->trans_start, dev->last_rx) used by bonding store a copy of jiffies and may not be updated for a long time. With HZ=1000, time_before_eq()/time_after_eq() will start giving bad results after ~25 days. jiffies will never be before slave->jiffies, dev->trans_start, dev->last_rx by more than possibly a couple ticks caused by preemption of this code. This allows us to detect/prevent these overflows by replacing time_before_eq()/time_after_eq() with time_in_range(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02 13:45:54 +08:00
trans_start = dev_trans_start(slave->dev);
bonding: wrap slave state work transfers slave->state into slave->backup (that it's going to transfer into bitfield. Introduce wrapper inlines to do the work with it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:37 +08:00
if (bond_is_active_slave(slave) &&
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
(!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, last_rx, 2))) {
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
slave->new_link = BOND_LINK_DOWN;
commit++;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
return commit;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Called to commit link state changes noted by inspection step of
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
* active-backup mode ARP monitor.
*
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
* Called with RTNL hold.
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
*/
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
static void bond_ab_arp_commit(struct bonding *bond)
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
{
bonding: Fix jiffies overflow problems (again) The time_before_eq()/time_after_eq() functions operate on unsigned long and only work if the difference between the two compared values is smaller than half the range of unsigned long (31 bits on i386). Some of the variables (slave->jiffies, dev->trans_start, dev->last_rx) used by bonding store a copy of jiffies and may not be updated for a long time. With HZ=1000, time_before_eq()/time_after_eq() will start giving bad results after ~25 days. jiffies will never be before slave->jiffies, dev->trans_start, dev->last_rx by more than possibly a couple ticks caused by preemption of this code. This allows us to detect/prevent these overflows by replacing time_before_eq()/time_after_eq() with time_in_range(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02 13:45:54 +08:00
unsigned long trans_start;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
struct slave *slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
switch (slave->new_link) {
case BOND_LINK_NOCHANGE:
continue;
[PATCH] bonding: support carrier state for master Add support for the bonding master to specify its carrier state based upon the state of the slaves. For 802.3ad, the bond is up if there is an active, parterned aggregator. For other modes, the bond is up if any slaves are up. Updates driver version to 3.0.3. Based on a patch by jamal <hadi@cyberus.ca>. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-28 05:27:43 +08:00
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
case BOND_LINK_UP:
bonding: Fix jiffies overflow problems (again) The time_before_eq()/time_after_eq() functions operate on unsigned long and only work if the difference between the two compared values is smaller than half the range of unsigned long (31 bits on i386). Some of the variables (slave->jiffies, dev->trans_start, dev->last_rx) used by bonding store a copy of jiffies and may not be updated for a long time. With HZ=1000, time_before_eq()/time_after_eq() will start giving bad results after ~25 days. jiffies will never be before slave->jiffies, dev->trans_start, dev->last_rx by more than possibly a couple ticks caused by preemption of this code. This allows us to detect/prevent these overflows by replacing time_before_eq()/time_after_eq() with time_in_range(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02 13:45:54 +08:00
trans_start = dev_trans_start(slave->dev);
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (rtnl_dereference(bond->curr_active_slave) != slave ||
(!rtnl_dereference(bond->curr_active_slave) &&
bonding: add bond_time_in_interval() and use it for time comparison Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 09:50:36 +08:00
bond_time_in_interval(bond, trans_start, 1))) {
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
struct slave *current_arp_slave;
current_arp_slave = rtnl_dereference(bond->current_arp_slave);
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
if (current_arp_slave) {
bonding: properly unset current_arp_slave on slave link up When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05 11:47:43 +08:00
bond_set_slave_inactive_flags(
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
current_arp_slave,
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
BOND_SLAVE_NOTIFY_NOW);
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
RCU_INIT_POINTER(bond->current_arp_slave, NULL);
bonding: properly unset current_arp_slave on slave link up When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05 11:47:43 +08:00
}
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status definitely up for interface %s\n",
slave->dev->name);
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (!rtnl_dereference(bond->curr_active_slave) ||
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
slave == rtnl_dereference(bond->primary_slave))
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
goto do_failover;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
case BOND_LINK_DOWN:
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_NOW);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "link status definitely down for interface %s, disabling it\n",
slave->dev->name);
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (slave == rtnl_dereference(bond->curr_active_slave)) {
bonding: add proper __rcu annotation for current_arp_slave Using __rcu annotation actually helps to spot all accesses to bond->current_arp_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:56 +08:00
RCU_INIT_POINTER(bond->current_arp_slave, NULL);
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
goto do_failover;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
continue;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
default:
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(bond->dev, "impossible: new_link %d on slave %s\n",
slave->new_link, slave->dev->name);
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
do_failover:
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
block_netpoll_tx();
bonding: make ab_arp select active slaves as other modes When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31 19:09:38 +08:00
bond_select_active_slave(bond);
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
unblock_netpoll_tx();
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
bond_set_carrier(bond);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Send ARP probes for active-backup mode ARP monitor.
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
*
bonding: adjust locking comments Now that locks have been removed, remove some unnecessary comments and adjust others to reflect reality. Also add a comment to "mode_lock" to describe its current users and give a brief summary why they need it. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:28 +08:00
* Called with rcu_read_lock held.
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
*/
bonding: restructure locking of bond_ab_arp_probe() Currently we're calling it from under RCU context, however we're using some functions that require rtnl to be held. Fix this by restructuring the locking - don't call it under any locks, aquire rcu_read_lock() if we're sending _only_ (i.e. we have the active slave present), and use rtnl locking otherwise - if we need to modify (in)active flags of a slave. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27 21:37:32 +08:00
static bool bond_ab_arp_probe(struct bonding *bond)
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
{
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
struct slave *slave, *before = NULL, *new_slave = NULL,
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
*curr_arp_slave = rcu_dereference(bond->current_arp_slave),
*curr_active_slave = rcu_dereference(bond->curr_active_slave);
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
struct list_head *iter;
bool found = false;
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER;
bonding: restructure locking of bond_ab_arp_probe() Currently we're calling it from under RCU context, however we're using some functions that require rtnl to be held. Fix this by restructuring the locking - don't call it under any locks, aquire rcu_read_lock() if we're sending _only_ (i.e. we have the active slave present), and use rtnl locking otherwise - if we need to modify (in)active flags of a slave. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27 21:37:32 +08:00
bonding: RCUify bond_ab_arp_probe Currently bond_ab_arp_probe() is always called under rcu_read_lock(), however to work with curr_active_slave we're still holding the curr_slave_lock. To remove that curr_slave_lock - rcu_dereference the bond's curr_active_slave and use it further - so that we're sure the slave won't go away, and we don't care if it will change in the meanwhile. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27 21:37:31 +08:00
if (curr_arp_slave && curr_active_slave)
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "PROBE: c_arp %s && cas %s BAD\n",
curr_arp_slave->dev->name,
curr_active_slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: RCUify bond_ab_arp_probe Currently bond_ab_arp_probe() is always called under rcu_read_lock(), however to work with curr_active_slave we're still holding the curr_slave_lock. To remove that curr_slave_lock - rcu_dereference the bond's curr_active_slave and use it further - so that we're sure the slave won't go away, and we don't care if it will change in the meanwhile. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27 21:37:31 +08:00
if (curr_active_slave) {
bond_arp_send_all(bond, curr_active_slave);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
return should_notify_rtnl;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
/* if we don't have a curr_active_slave, search for the next available
* backup slave from the current_arp_slave and make it the candidate
* for becoming the curr_active_slave
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
if (!curr_arp_slave) {
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
curr_arp_slave = bond_first_slave_rcu(bond);
if (!curr_arp_slave)
return should_notify_rtnl;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER);
bonding: Convert locks to _bh, rework alb locking for new locking Convert locking-related activity to new & improved system. Convert some lock acquisitions to _bh and rework parts of ALB mode, both to avoid deadlocks with workqueue activity. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:49 +08:00
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (!found && !before && bond_slave_is_up(slave))
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
before = slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (found && !new_slave && bond_slave_is_up(slave))
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
new_slave = slave;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
/* if the link state is up at this point, we
* mark it down - this can happen if we have
* simultaneous link failures and
* reselect_active_interface doesn't make this
* one the current slave so it is still marked
* up when it is actually down
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (!bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_LATER);
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(slave,
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
BOND_SLAVE_NOTIFY_LATER);
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "backup interface %s is now down\n",
slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
if (slave == curr_arp_slave)
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
found = true;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
}
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
if (!new_slave && before)
new_slave = before;
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
if (!new_slave)
goto check_state;
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_set_slave_link_state(new_slave, BOND_LINK_BACK,
BOND_SLAVE_NOTIFY_LATER);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_LATER);
bonding: rework bond_ab_arp_probe() to use bond_for_each_slave() Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also it doesn't check every slave for disrepencies between the actual IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the next suitable slave. Fix this by using bond_for_each_slave() and storing the first good slave in *before till we find the current_arp_slave, after that we store the first good slave in new_slave. If new_slave is empty - use the slave stored in before, and if it's also empty - then we didn't find any suitable slave. Also, in the meanwhile, check for each slave status. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:19 +08:00
bond_arp_send_all(bond, new_slave);
bonding: trivial: rename slave->jiffies to ->last_link_up slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:46 +08:00
new_slave->last_link_up = jiffies;
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
rcu_assign_pointer(bond->current_arp_slave, new_slave);
bonding: restructure locking of bond_ab_arp_probe() Currently we're calling it from under RCU context, however we're using some functions that require rtnl to be held. Fix this by restructuring the locking - don't call it under any locks, aquire rcu_read_lock() if we're sending _only_ (i.e. we have the active slave present), and use rtnl locking otherwise - if we need to modify (in)active flags of a slave. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-27 21:37:32 +08:00
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
check_state:
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
if (slave->should_notify || slave->should_notify_link) {
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW;
break;
}
}
return should_notify_rtnl;
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make more functions static More functions in bonding that can be declared static because they are only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31 02:43:41 +08:00
static void bond_activebackup_arp_mon(struct work_struct *work)
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
{
struct bonding *bond = container_of(work, struct bonding,
arp_work.work);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
bool should_notify_peers = false;
bool should_notify_rtnl = false;
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
int delta_in_ticks;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
if (!bond_has_slaves(bond))
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
goto re_arm;
bonding: rebuild the lock use for bond_activebackup_arp_mon() The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by: Jay Vosburgh <fubar@us.ibm.com> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-13 10:20:02 +08:00
rcu_read_lock();
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
should_notify_peers = bond_should_notify_peers(bond);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
if (bond_ab_arp_inspect(bond)) {
rcu_read_unlock();
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
/* Race avoidance with bond_close flush of workqueue */
if (!rtnl_trylock()) {
delta_in_ticks = 1;
should_notify_peers = false;
goto re_arm;
}
bonding: refactor ARP active-backup monitor Refactor ARP monitor for active-backup mode. The motivation for this is to take care of locking issues in a clear manner (particularly to correctly handle RTNL vs. the bonding locks). Currently, the a-b ARP monitor does not hold RTNL at all, but future changes will require RTNL during ARP monitor failovers. Rather than using conditional locking, this patch instead breaks up the ARP monitor into three discrete steps: inspection, commit changes, and probe. The inspection phase marks slaves that require link state changes. The commit phase is only called if inspection detects that changes are needed, and is called with RTNL. Lastly, the probe phase issues the ARP probes that the inspection phase uses to determine link state. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:13 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
bond_ab_arp_commit(bond);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
rtnl_unlock();
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
rcu_read_lock();
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
}
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
should_notify_rtnl = bond_ab_arp_probe(bond);
rcu_read_unlock();
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
bonding: remove bond read lock for bond_activebackup_arp_mon() The bond slave list may change when the monitor is running, the slave list is no longer protected by bond->lock, only protected by rtnl lock(), so we have 3 ways to modify it: 1.add bond_master_upper_dev_link() and bond_upper_dev_unlink() in bond->lock, but it is unsafe to call call_netdevice_notifiers() in write lock. 2.remove unused bond->lock for monitor function, only use the existing rtnl lock(). 3.use rcu_read_lock() to protect it, of course, it will transform bond_for_each_slave to bond_for_each_slave_rcu() and performance is better, but in slow path, it is ignored. so I remove the bond->lock and move the rtnl lock to protect the whole monitor function. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-24 11:09:25 +08:00
re_arm:
if (bond->params.arp_interval)
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
if (should_notify_peers || should_notify_rtnl) {
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
if (!rtnl_trylock())
return;
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
if (should_notify_peers)
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
bond->dev);
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
if (should_notify_rtnl) {
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
bond_slave_state_notify(bond);
bonding: allow notifications for bond_set_slave_link_state Similar to state notifications. We allow caller to indicate if the notification should happen now or later, depending on if he holds rtnl mutex or not. Introduce bond_slave_link_notify function (similar to bond_slave_state_notify) which is later on called with rtnl mutex and goes over slaves and executes delayed notification. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 19:12:19 +08:00
bond_slave_link_notify(bond);
}
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor Veaceslav has reported and fix this problem by commit f2ebd477f141bc0 (bonding: restructure locking of bond_ab_arp_probe()). According Jay's opinion, the current solution is not very well, because the notification is to indicate that the interface has actually changed state in a meaningful way, but these calls in the ab ARP monitor are internal settings of the flags to allow the ARP monitor to search for a slave to become active when there are no active slaves. The flag setting to active or backup is to permit the ARP monitor's response logic to do the right thing when deciding if the test slave (current_arp_slave) is up or not. So the best way to fix the problem is that we should not send a notification when the slave is in testing state, and check the state at the end of the monitor, if the slave's state recover, avoid to send pointless notification twice. And RTNL is really a big lock, hold it regardless the slave's state changed or not when the current_active_slave is null will loss performance (every 100ms), so we should hold it only when the slave's state changed and need to notify. I revert the old commit and add new modifications. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:23 +08:00
Revert "Merge branch 'bonding_monitor_locking'" This reverts commit 4d961a101e032b4bf223b279b4b35bc77576f5a8, reversing changes made to a00f6fcc7d0c62a91768d9c4ccba4c7d64fbbce3. Revert bond locking changes, they cause regressions and Veaceslav Falico doesn't like how the commit messages were done at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 12:11:22 +08:00
rtnl_unlock();
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*-------------------------- netdev event handling --------------------------*/
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Change device name */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_event_changename(struct bonding *bond)
{
bond_remove_proc_entry(bond);
bond_create_proc_entry(bond);
bonding: remove bonding read/write semaphore The whole read/write semaphore locking can be removed. It doesn't add any protection that isn't already done by using the RTNL mutex properly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:46 +08:00
bonding: add the debugfs facility to the bonding driver This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 23:17:13 +08:00
bond_debug_reregister(bond);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return NOTIFY_DONE;
}
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static int bond_master_netdev_event(unsigned long event,
struct net_device *bond_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *event_bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (event) {
case NETDEV_CHANGENAME:
return bond_event_changename(event_bond);
bonding: Manage /proc/net/bonding/ entries from the netdev events It was recently reported that moving a bonding device between network namespaces causes warnings from /proc. It turns out after the move we were trying to add and to remove the /proc/net/bonding entries from the wrong network namespace. Move the bonding /proc registration code into the NETDEV_REGISTER and NETDEV_UNREGISTER events where the proc registration and unregistration will always happen at the right time. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09 18:51:45 +08:00
case NETDEV_UNREGISTER:
bond_remove_proc_entry(event_bond);
break;
case NETDEV_REGISTER:
bond_create_proc_entry(event_bond);
break;
bonding: simplify and fix peer notification This patch aims to remove a use of the bond->lock for mutual exclusion which will later allow easier migration to RCU of the users of this functionality. We use RTNL as a synchronizing mechanism since it's always held when send_peer_notif is set, and when it is decremented from the notifier function. We can also drop some locking, and fix the leakage of the send_peer_notif counter. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 19:51:38 +08:00
case NETDEV_NOTIFY_PEERS:
if (event_bond->send_peer_notif)
event_bond->send_peer_notif--;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default:
break;
}
return NOTIFY_DONE;
}
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static int bond_slave_netdev_event(unsigned long event,
struct net_device *slave_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
struct slave *slave = bond_slave_get_rtnl(slave_dev), *primary;
bonding: fix netdev event NULL pointer dereference In commit 471cb5a33dcbd7c529684a2ac7ba4451414ee4a7 ("bonding: remove usage of dev->master") a bug was introduced which causes a NULL pointer dereference. If a bond device is in mode 6 (ALB) and a slave is added it will dereference a NULL pointer in bond_slave_netdev_event(). This is because in bond_enslave we have bond_alb_init_slave() which changes the MAC address of the slave and causes a NETDEV_CHANGEADDR. Then we have in bond_slave_netdev_event(): struct slave *slave = bond_slave_get_rtnl(slave_dev); struct bonding *bond = slave->bond; bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at that time is NULL since netdev_rx_handler_register() is called later. This is fixed by checking if slave is NULL before dereferencing it. v2: Comment style changed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 17:18:55 +08:00
struct bonding *bond;
struct net_device *bond_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix netdev event NULL pointer dereference In commit 471cb5a33dcbd7c529684a2ac7ba4451414ee4a7 ("bonding: remove usage of dev->master") a bug was introduced which causes a NULL pointer dereference. If a bond device is in mode 6 (ALB) and a slave is added it will dereference a NULL pointer in bond_slave_netdev_event(). This is because in bond_enslave we have bond_alb_init_slave() which changes the MAC address of the slave and causes a NETDEV_CHANGEADDR. Then we have in bond_slave_netdev_event(): struct slave *slave = bond_slave_get_rtnl(slave_dev); struct bonding *bond = slave->bond; bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at that time is NULL since netdev_rx_handler_register() is called later. This is fixed by checking if slave is NULL before dereferencing it. v2: Comment style changed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 17:18:55 +08:00
/* A netdev event can be generated while enslaving a device
* before netdev_rx_handler_register is called in which case
* slave will be NULL
*/
if (!slave)
return NOTIFY_DONE;
bond_dev = slave->bond->dev;
bond = slave->bond;
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
primary = rtnl_dereference(bond->primary_slave);
bonding: fix netdev event NULL pointer dereference In commit 471cb5a33dcbd7c529684a2ac7ba4451414ee4a7 ("bonding: remove usage of dev->master") a bug was introduced which causes a NULL pointer dereference. If a bond device is in mode 6 (ALB) and a slave is added it will dereference a NULL pointer in bond_slave_netdev_event(). This is because in bond_enslave we have bond_alb_init_slave() which changes the MAC address of the slave and causes a NETDEV_CHANGEADDR. Then we have in bond_slave_netdev_event(): struct slave *slave = bond_slave_get_rtnl(slave_dev); struct bonding *bond = slave->bond; bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at that time is NULL since netdev_rx_handler_register() is called later. This is fixed by checking if slave is NULL before dereferencing it. v2: Comment style changed. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 17:18:55 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (event) {
case NETDEV_UNREGISTER:
bonding: remove unnecessary setup_by_slave member We have a member called setup_by_slave in struct bonding to denote if the bond dev has different type than ARPHRD_ETHER, but that is already denoted in bond's netdev type variable if it was setup by the slave, so use that instead of the member. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 23:13:37 +08:00
if (bond_dev->type != ARPHRD_ETHER)
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
bond_release_and_destroy(bond_dev, slave_dev);
else
bond_release(bond_dev, slave_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
bonding:update speed/duplex for NETDEV_CHANGE Zheng Liang(lzheng@redhat.com) found a bug that if we config bonding with arp monitor, sometimes bonding driver cannot get the speed and duplex from its slaves, it will assume them to be 100Mb/sec and Full, please see /proc/net/bonding/bond0. But there is no such problem when uses miimon. (Take igb for example) I find that the reason is that after dev_open() in bond_enslave(), bond_update_speed_duplex() will call igb_get_settings() , but in that function, it runs ethtool_cmd_speed_set(ecmd, -1); ecmd->duplex = -1; because igb get an error value of status. So even dev_open() is called, but the device is not really ready to get its settings. Maybe it is safe for us to call igb_get_settings() only after this message shows up, that is "igb: p4p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX". So I prefer to update the speed and duplex for a slave when reseices NETDEV_CHANGE/NETDEV_UP event. Changelog V2: 1 remove the "fake 100/Full" logic in bond_update_speed_duplex(), set speed and duplex to -1 when it gets error value of speed and duplex. 2 delete the warning in bond_enslave() if bond_update_speed_duplex() returns error. 3 make bond_info_show_slave() handle bad values of speed and duplex. Signed-off-by: Weiping Pan <wpan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-01 01:20:48 +08:00
case NETDEV_UP:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case NETDEV_CHANGE:
bonding: remove usage of dev->master Benefit from new upper dev list and free bonding from dev->master usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 06:49:01 +08:00
bond_update_speed_duplex(slave);
bonding: simplify / unify event handling code for 3ad mode. Old logic of updating state-machine is not required since ad_update_actor_keys() does it implicitly. The only loss is the notification differentiation between speed vs. duplex change. Now only one unified notification is printed. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01 03:45:11 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_adapter_speed_duplex_changed(slave);
bonding: simple code refactor Remove duplicate code. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 02:13:25 +08:00
/* Fallthrough */
case NETDEV_DOWN:
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
/* Refresh slave-array if applicable!
* If the setup does not use miimon or arpmon (mode-specific!),
* then these events will not cause the slave-array to be
* refreshed. This will cause xmit to use a slave that is not
* usable. Avoid such situation by refeshing the array at these
* events. If these (miimon/arpmon) parameters are configured
* then array gets refreshed twice and that should be fine!
*/
if (bond_mode_uses_xmit_hash(bond))
bond_update_slave_arr(bond, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case NETDEV_CHANGEMTU:
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* TODO: Should slaves be allowed to
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* independently alter their MTU? For
* an active-backup bond, slaves need
* not be the same type of device, so
* MTUs may vary. For other modes,
* slaves arguably should have the
* same MTUs. To do this, we'd need to
* take over the slave's change_mtu
* function for the duration of their
* servitude.
*/
break;
case NETDEV_CHANGENAME:
bonding: handle slave's name change with primary_slave logic Currently, if a slave's name change, we just pass it by. However, if the slave is a current primary_slave, then we end up with using a slave, whose name != params.primary, for primary_slave. And vice-versa, if we don't have a primary_slave but have params.primary set - we will not detected a new primary_slave. Fix this by catching the NETDEV_CHANGENAME event and setting primary_slave accordingly. Also, if the primary_slave was changed, issue a reselection of the active slave, cause the priorities have changed. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 09:04:29 +08:00
/* we don't care if we don't have primary set */
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (!bond_uses_primary(bond) ||
bonding: handle slave's name change with primary_slave logic Currently, if a slave's name change, we just pass it by. However, if the slave is a current primary_slave, then we end up with using a slave, whose name != params.primary, for primary_slave. And vice-versa, if we don't have a primary_slave but have params.primary set - we will not detected a new primary_slave. Fix this by catching the NETDEV_CHANGENAME event and setting primary_slave accordingly. Also, if the primary_slave was changed, issue a reselection of the active slave, cause the priorities have changed. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 09:04:29 +08:00
!bond->params.primary[0])
break;
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
if (slave == primary) {
bonding: handle slave's name change with primary_slave logic Currently, if a slave's name change, we just pass it by. However, if the slave is a current primary_slave, then we end up with using a slave, whose name != params.primary, for primary_slave. And vice-versa, if we don't have a primary_slave but have params.primary set - we will not detected a new primary_slave. Fix this by catching the NETDEV_CHANGENAME event and setting primary_slave accordingly. Also, if the primary_slave was changed, issue a reselection of the active slave, cause the priorities have changed. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 09:04:29 +08:00
/* slave's name changed - he's no longer primary */
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
RCU_INIT_POINTER(bond->primary_slave, NULL);
bonding: handle slave's name change with primary_slave logic Currently, if a slave's name change, we just pass it by. However, if the slave is a current primary_slave, then we end up with using a slave, whose name != params.primary, for primary_slave. And vice-versa, if we don't have a primary_slave but have params.primary set - we will not detected a new primary_slave. Fix this by catching the NETDEV_CHANGENAME event and setting primary_slave accordingly. Also, if the primary_slave was changed, issue a reselection of the active slave, cause the priorities have changed. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 09:04:29 +08:00
} else if (!strcmp(slave_dev->name, bond->params.primary)) {
/* we have a new primary slave */
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
rcu_assign_pointer(bond->primary_slave, slave);
bonding: handle slave's name change with primary_slave logic Currently, if a slave's name change, we just pass it by. However, if the slave is a current primary_slave, then we end up with using a slave, whose name != params.primary, for primary_slave. And vice-versa, if we don't have a primary_slave but have params.primary set - we will not detected a new primary_slave. Fix this by catching the NETDEV_CHANGENAME event and setting primary_slave accordingly. Also, if the primary_slave was changed, issue a reselection of the active slave, cause the priorities have changed. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 09:04:29 +08:00
} else { /* we didn't change primary - exit */
break;
}
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond->dev, "Primary slave changed to %s, reselecting active slave\n",
bonding: convert primary_slave to use RCU This is necessary mainly for two bonding call sites: procfs and sysfs as it was dereferenced without any real protection. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10 05:17:00 +08:00
primary ? slave_dev->name : "none");
bonding: Fix deadlock in bonding driver when using netpoll The bonding driver take write locks and spin locks that are shared by the tx path in enslave processing and notification processing, If the netconsole is in use, the bonding can call printk which puts us in the netpoll tx path, if the netconsole is attached to the bonding driver, result in deadlock. So add protection for these place, by checking the netpoll_block_tx state, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 12:06:40 +08:00
block_netpoll_tx();
bonding: handle slave's name change with primary_slave logic Currently, if a slave's name change, we just pass it by. However, if the slave is a current primary_slave, then we end up with using a slave, whose name != params.primary, for primary_slave. And vice-versa, if we don't have a primary_slave but have params.primary set - we will not detected a new primary_slave. Fix this by catching the NETDEV_CHANGENAME event and setting primary_slave accordingly. Also, if the primary_slave was changed, issue a reselection of the active slave, cause the priorities have changed. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 09:04:29 +08:00
bond_select_active_slave(bond);
bonding: Fix deadlock in bonding driver when using netpoll The bonding driver take write locks and spin locks that are shared by the tx path in enslave processing and notification processing, If the netconsole is in use, the bonding can call printk which puts us in the netpoll tx path, if the netconsole is attached to the bonding driver, result in deadlock. So add protection for these place, by checking the netpoll_block_tx state, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 12:06:40 +08:00
unblock_netpoll_tx();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
case NETDEV_FEAT_CHANGE:
bond_compute_features(bond);
break;
net: convert resend IGMP to notifier event Until now, bond_resend_igmp_join_requests() looks for vlans attached to bonding device, bridge where bonding act as port manually. It does not care of other scenarios, like stacked bonds or team device above. Make this more generic and use netdev notifier to propagate the event to upper devices and to actually call ip_mc_rejoin_groups(). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-20 18:13:53 +08:00
case NETDEV_RESEND_IGMP:
/* Propagate to master device */
call_netdevice_notifiers(event, slave->bond->dev);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default:
break;
}
return NOTIFY_DONE;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* bond_netdev_event: handle netdev notifier chain events.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This function receives events for the netdev chain. The caller (an
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 17:16:30 +08:00
* ioctl handler calling blocking_notifier_call_chain) holds the necessary
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* locks for us to safely manipulate the slave devices (RTNL lock,
* dev_probe_lock).
*/
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
static int bond_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
net: pass info struct via netdevice notifier So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 09:30:21 +08:00
struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(event_dev, "event: %lx\n", event);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] bonding: Add priv_flag to avoid event mishandling Add priv_flag to specifically identify bonding-involved devices. Needed because IFF_MASTER is an unreliable identifier (vlan interfaces above bonding will inherit IFF_MASTER). Misidentification of devices would cause notifier events for other devices to be erroneously processed by bonding, causing various havoc. Bug discovered by Martin Papik <martin.papik@ipsec.info>; this patch is modified from his original. Signed-off-by: Martin Papik <martin.papik@ipsec.info> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:10 +08:00
if (!(event_dev->priv_flags & IFF_BONDING))
return NOTIFY_DONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (event_dev->flags & IFF_MASTER) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(event_dev, "IFF_MASTER\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return bond_master_netdev_event(event, event_dev);
}
if (event_dev->flags & IFF_SLAVE) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(event_dev, "IFF_SLAVE\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return bond_slave_netdev_event(event, event_dev);
}
return NOTIFY_DONE;
}
static struct notifier_block bond_netdev_notifier = {
.notifier_call = bond_netdev_event,
};
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
/*---------------------------- Hashing Policies -----------------------------*/
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
/* L2 hash helper */
static inline u32 bond_eth_hash(struct sk_buff *skb)
bonding: support for IPv6 transmit hashing Currently the "bonding" driver does not support load balancing outgoing traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4) are currently supported; this patch adds transmit hashing for IPv6 (and TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the bonding driver. In addition, bounds checking has been added to all transmit hashing functions. The algorithm chosen (xor'ing the bottom three quads of the source and destination addresses together, then xor'ing each byte of that result into the bottom byte, finally xor'ing with the last bytes of the MAC addresses) was selected after testing almost 400,000 unique IPv6 addresses harvested from server logs. This algorithm had the most even distribution for both big- and little-endian architectures while still using few instructions. Its behavior also attempts to closely match that of the IPv4 algorithm. The IPv6 flow label was intentionally not included in the hash as it appears to be unset in the vast majority of IPv6 traffic sampled, and the current algorithm not using the flow label already offers a very even distribution. Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets, ie, they are not balanced based on layer 4 information. Additionally, IPv6 packets with intermediate headers are not balanced based on layer 4 information. In practice these intermediate headers are not common and this should not cause any problems, and the alternative (a packet-parsing loop and look-up table) seemed slow and complicated for little gain. Tested-by: John Eaglesham <linux@8192.net> Signed-off-by: John Eaglesham <linux@8192.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 04:43:35 +08:00
{
bonding: enhance L2 hash helper with packet type Current L2 hash helper calculates destination eth addr and source ether addr as L2 hash factors. This patch is adding packet type ID field into L2 hash factors. While one of BOND_XMIT_POLICY_LAYER2 or BOND_XMIT_POLICY_{LAYER|ENCAP}23 is applied, for the 2nd level hash, enhanced hash method can help to distribute different types of packets like IPv4/IPv6 packets to different slave devices. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> CC: Pan Jiafei <Jiafei.Pan@freescale.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 14:16:25 +08:00
struct ethhdr *ep, hdr_tmp;
bonding: support for IPv6 transmit hashing Currently the "bonding" driver does not support load balancing outgoing traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4) are currently supported; this patch adds transmit hashing for IPv6 (and TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the bonding driver. In addition, bounds checking has been added to all transmit hashing functions. The algorithm chosen (xor'ing the bottom three quads of the source and destination addresses together, then xor'ing each byte of that result into the bottom byte, finally xor'ing with the last bytes of the MAC addresses) was selected after testing almost 400,000 unique IPv6 addresses harvested from server logs. This algorithm had the most even distribution for both big- and little-endian architectures while still using few instructions. Its behavior also attempts to closely match that of the IPv4 algorithm. The IPv6 flow label was intentionally not included in the hash as it appears to be unset in the vast majority of IPv6 traffic sampled, and the current algorithm not using the flow label already offers a very even distribution. Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets, ie, they are not balanced based on layer 4 information. Additionally, IPv6 packets with intermediate headers are not balanced based on layer 4 information. In practice these intermediate headers are not common and this should not cause any problems, and the alternative (a packet-parsing loop and look-up table) seemed slow and complicated for little gain. Tested-by: John Eaglesham <linux@8192.net> Signed-off-by: John Eaglesham <linux@8192.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 04:43:35 +08:00
bonding: enhance L2 hash helper with packet type Current L2 hash helper calculates destination eth addr and source ether addr as L2 hash factors. This patch is adding packet type ID field into L2 hash factors. While one of BOND_XMIT_POLICY_LAYER2 or BOND_XMIT_POLICY_{LAYER|ENCAP}23 is applied, for the 2nd level hash, enhanced hash method can help to distribute different types of packets like IPv4/IPv6 packets to different slave devices. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> CC: Pan Jiafei <Jiafei.Pan@freescale.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 14:16:25 +08:00
ep = skb_header_pointer(skb, 0, sizeof(hdr_tmp), &hdr_tmp);
if (ep)
return ep->h_dest[5] ^ ep->h_source[5] ^ ep->h_proto;
bonding: support for IPv6 transmit hashing Currently the "bonding" driver does not support load balancing outgoing traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4) are currently supported; this patch adds transmit hashing for IPv6 (and TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the bonding driver. In addition, bounds checking has been added to all transmit hashing functions. The algorithm chosen (xor'ing the bottom three quads of the source and destination addresses together, then xor'ing each byte of that result into the bottom byte, finally xor'ing with the last bytes of the MAC addresses) was selected after testing almost 400,000 unique IPv6 addresses harvested from server logs. This algorithm had the most even distribution for both big- and little-endian architectures while still using few instructions. Its behavior also attempts to closely match that of the IPv4 algorithm. The IPv6 flow label was intentionally not included in the hash as it appears to be unset in the vast majority of IPv6 traffic sampled, and the current algorithm not using the flow label already offers a very even distribution. Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets, ie, they are not balanced based on layer 4 information. Additionally, IPv6 packets with intermediate headers are not balanced based on layer 4 information. In practice these intermediate headers are not common and this should not cause any problems, and the alternative (a packet-parsing loop and look-up table) seemed slow and complicated for little gain. Tested-by: John Eaglesham <linux@8192.net> Signed-off-by: John Eaglesham <linux@8192.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 04:43:35 +08:00
return 0;
}
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
/* Extract the appropriate headers based on bond's xmit policy */
static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb,
struct flow_keys *fk)
bonding: Add new layer2+3 hash for xor/802.3ad modes Add new hash for balance-xor and 802.3ad modes. Originally submitted by "Glenn Griffin" <ggriffin.kernel@gmail.com>; modified by Jay Vosburgh to move setting of hash policy out of line, tweak the documentation update and add version update to 3.2.2. Glenn's original comment follows: Included is a patch for a new xmit_hash_policy for the bonding driver that selects slaves based on MAC and IP information. This is a middle ground between what currently exists in the layer2 only policy and the layer3+4 policy. This policy strives to be fully 802.3ad compliant by transmitting every packet of any particular flow over the same link. As documented the layer3+4 policy is not fully compliant for extreme cases such as ip fragmentation, so this policy is a nice compromise for environments that require full compliance but desire more than the layer2 only policy. Signed-off-by: "Glenn Griffin" <ggriffin.kernel@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:40:34 +08:00
{
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
const struct ipv6hdr *iph6;
bonding: fix l23 and l34 load balancing in forwarding path Since commit 6b923cb7188d46 (bonding: support for IPv6 transmit hashing) bonding doesn't properly hash traffic in forwarding setups. Vitaly V. Bursov diagnosed that skb_network_header_len() returned 0 in this case. More generally, the transport header might not be in the skb head. Use pskb_may_pull() & skb_header_pointer() to get it right, and use proto_ports_offset() in bond_xmit_hash_policy_l34() to get support for more protocols than TCP and UDP. Reported-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: John Eaglesham <linux@8192.net> Tested-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 01:03:24 +08:00
const struct iphdr *iph;
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
int noff, proto = -1;
bonding: support for IPv6 transmit hashing Currently the "bonding" driver does not support load balancing outgoing traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4) are currently supported; this patch adds transmit hashing for IPv6 (and TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the bonding driver. In addition, bounds checking has been added to all transmit hashing functions. The algorithm chosen (xor'ing the bottom three quads of the source and destination addresses together, then xor'ing each byte of that result into the bottom byte, finally xor'ing with the last bytes of the MAC addresses) was selected after testing almost 400,000 unique IPv6 addresses harvested from server logs. This algorithm had the most even distribution for both big- and little-endian architectures while still using few instructions. Its behavior also attempts to closely match that of the IPv4 algorithm. The IPv6 flow label was intentionally not included in the hash as it appears to be unset in the vast majority of IPv6 traffic sampled, and the current algorithm not using the flow label already offers a very even distribution. Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets, ie, they are not balanced based on layer 4 information. Additionally, IPv6 packets with intermediate headers are not balanced based on layer 4 information. In practice these intermediate headers are not common and this should not cause any problems, and the alternative (a packet-parsing loop and look-up table) seemed slow and complicated for little gain. Tested-by: John Eaglesham <linux@8192.net> Signed-off-by: John Eaglesham <linux@8192.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 04:43:35 +08:00
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
if (bond->params.xmit_policy > BOND_XMIT_POLICY_LAYER23)
flow_dissector: Add flags argument to skb_flow_dissector functions The flags argument will allow control of the dissection process (for instance whether to parse beyond L3). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02 00:24:27 +08:00
return skb_flow_dissect_flow_keys(skb, fk, 0);
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
flow_dissect: use programable dissector in skb_flow_dissect and friends Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 20:56:16 +08:00
fk->ports.ports = 0;
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
noff = skb_network_offset(skb);
if (skb->protocol == htons(ETH_P_IP)) {
bonding: slight optimization for bond xmit path Add unlikely() micro to the unlikely conditions in the bond xmit path for slight optimization. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:00:09 +08:00
if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
return false;
bonding: support for IPv6 transmit hashing Currently the "bonding" driver does not support load balancing outgoing traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4) are currently supported; this patch adds transmit hashing for IPv6 (and TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the bonding driver. In addition, bounds checking has been added to all transmit hashing functions. The algorithm chosen (xor'ing the bottom three quads of the source and destination addresses together, then xor'ing each byte of that result into the bottom byte, finally xor'ing with the last bytes of the MAC addresses) was selected after testing almost 400,000 unique IPv6 addresses harvested from server logs. This algorithm had the most even distribution for both big- and little-endian architectures while still using few instructions. Its behavior also attempts to closely match that of the IPv4 algorithm. The IPv6 flow label was intentionally not included in the hash as it appears to be unset in the vast majority of IPv6 traffic sampled, and the current algorithm not using the flow label already offers a very even distribution. Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets, ie, they are not balanced based on layer 4 information. Additionally, IPv6 packets with intermediate headers are not balanced based on layer 4 information. In practice these intermediate headers are not common and this should not cause any problems, and the alternative (a packet-parsing loop and look-up table) seemed slow and complicated for little gain. Tested-by: John Eaglesham <linux@8192.net> Signed-off-by: John Eaglesham <linux@8192.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-22 04:43:35 +08:00
iph = ip_hdr(skb);
net: Add full IPv6 addresses to flow_keys This patch adds full IPv6 addresses into flow_keys and uses them as input to the flow hash function. The implementation supports either IPv4 or IPv6 addresses in a union, and selector is used to determine how may words to input to jhash2. We also add flow_get_u32_dst and flow_get_u32_src functions which are used to get a u32 representation of the source and destination addresses. For IPv6, ipv6_addr_hash is called. These functions retain getting the legacy values of src and dst in flow_keys. With this patch, Ethertype and IP protocol are now included in the flow hash input. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 00:16:40 +08:00
iph_to_flow_copy_v4addrs(fk, iph);
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
noff += iph->ihl << 2;
if (!ip_is_fragment(iph))
proto = iph->protocol;
} else if (skb->protocol == htons(ETH_P_IPV6)) {
bonding: slight optimization for bond xmit path Add unlikely() micro to the unlikely conditions in the bond xmit path for slight optimization. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:00:09 +08:00
if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph6))))
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
return false;
iph6 = ipv6_hdr(skb);
net: Add full IPv6 addresses to flow_keys This patch adds full IPv6 addresses into flow_keys and uses them as input to the flow hash function. The implementation supports either IPv4 or IPv6 addresses in a union, and selector is used to determine how may words to input to jhash2. We also add flow_get_u32_dst and flow_get_u32_src functions which are used to get a u32 representation of the source and destination addresses. For IPv6, ipv6_addr_hash is called. These functions retain getting the legacy values of src and dst in flow_keys. With this patch, Ethertype and IP protocol are now included in the flow hash input. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 00:16:40 +08:00
iph_to_flow_copy_v6addrs(fk, iph6);
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
noff += sizeof(*iph6);
proto = iph6->nexthdr;
} else {
return false;
bonding: Add new layer2+3 hash for xor/802.3ad modes Add new hash for balance-xor and 802.3ad modes. Originally submitted by "Glenn Griffin" <ggriffin.kernel@gmail.com>; modified by Jay Vosburgh to move setting of hash policy out of line, tweak the documentation update and add version update to 3.2.2. Glenn's original comment follows: Included is a patch for a new xmit_hash_policy for the bonding driver that selects slaves based on MAC and IP information. This is a middle ground between what currently exists in the layer2 only policy and the layer3+4 policy. This policy strives to be fully 802.3ad compliant by transmitting every packet of any particular flow over the same link. As documented the layer3+4 policy is not fully compliant for extreme cases such as ip fragmentation, so this policy is a nice compromise for environments that require full compliance but desire more than the layer2 only policy. Signed-off-by: "Glenn Griffin" <ggriffin.kernel@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:40:34 +08:00
}
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34 && proto >= 0)
flow_dissect: use programable dissector in skb_flow_dissect and friends Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 20:56:16 +08:00
fk->ports.ports = skb_flow_get_ports(skb, noff, proto);
bonding: Add new layer2+3 hash for xor/802.3ad modes Add new hash for balance-xor and 802.3ad modes. Originally submitted by "Glenn Griffin" <ggriffin.kernel@gmail.com>; modified by Jay Vosburgh to move setting of hash policy out of line, tweak the documentation update and add version update to 3.2.2. Glenn's original comment follows: Included is a patch for a new xmit_hash_policy for the bonding driver that selects slaves based on MAC and IP information. This is a middle ground between what currently exists in the layer2 only policy and the layer3+4 policy. This policy strives to be fully 802.3ad compliant by transmitting every packet of any particular flow over the same link. As documented the layer3+4 policy is not fully compliant for extreme cases such as ip fragmentation, so this policy is a nice compromise for environments that require full compliance but desire more than the layer2 only policy. Signed-off-by: "Glenn Griffin" <ggriffin.kernel@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:40:34 +08:00
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
return true;
bonding: Add new layer2+3 hash for xor/802.3ad modes Add new hash for balance-xor and 802.3ad modes. Originally submitted by "Glenn Griffin" <ggriffin.kernel@gmail.com>; modified by Jay Vosburgh to move setting of hash policy out of line, tweak the documentation update and add version update to 3.2.2. Glenn's original comment follows: Included is a patch for a new xmit_hash_policy for the bonding driver that selects slaves based on MAC and IP information. This is a middle ground between what currently exists in the layer2 only policy and the layer3+4 policy. This policy strives to be fully 802.3ad compliant by transmitting every packet of any particular flow over the same link. As documented the layer3+4 policy is not fully compliant for extreme cases such as ip fragmentation, so this policy is a nice compromise for environments that require full compliance but desire more than the layer2 only policy. Signed-off-by: "Glenn Griffin" <ggriffin.kernel@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:40:34 +08:00
}
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
/**
* bond_xmit_hash - generate a hash value based on the xmit policy
* @bond: bonding device
* @skb: buffer to use for headers
*
* This function will extract the necessary headers from the skb buffer and use
* them to generate a hash based on the xmit_policy set in the bonding device
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
*/
bonding: Changed hashing function to just provide hash Modified the hash function to return just hash separating from the modulo operation that can be performed by the caller. This is to make way for the tlb mode to use the same hashing policies that are used in the 802.3ad and Xor mode. Change-Id: I276609e87e0ca213c4d1b17b79c5e0b0f3d0dd6f Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:15 +08:00
u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb)
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
{
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
struct flow_keys flow;
u32 hash;
bonding: fix l23 and l34 load balancing in forwarding path Since commit 6b923cb7188d46 (bonding: support for IPv6 transmit hashing) bonding doesn't properly hash traffic in forwarding setups. Vitaly V. Bursov diagnosed that skb_network_header_len() returned 0 in this case. More generally, the transport header might not be in the skb head. Use pskb_may_pull() & skb_header_pointer() to get it right, and use proto_ports_offset() in bond_xmit_hash_policy_l34() to get support for more protocols than TCP and UDP. Reported-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: John Eaglesham <linux@8192.net> Tested-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 01:03:24 +08:00
bonding: use l4 hash if available If skb carries a l4 hash, no need to perform a flow dissection. Performance is slightly better : lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.39012e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.39393e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.39988e+06 After patch : lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.43579e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.44304e+06 lpaa5:~# ./super_netperf 200 -H lpaa6 -t TCP_RR -l 100 2.44312e+06 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 06:24:28 +08:00
if (bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP34 &&
skb->l4_hash)
return skb->hash;
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER2 ||
!bond_flow_dissect(bond, skb, &flow))
bonding: Changed hashing function to just provide hash Modified the hash function to return just hash separating from the modulo operation that can be performed by the caller. This is to make way for the tlb mode to use the same hashing policies that are used in the 802.3ad and Xor mode. Change-Id: I276609e87e0ca213c4d1b17b79c5e0b0f3d0dd6f Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:15 +08:00
return bond_eth_hash(skb);
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER23 ||
bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP23)
hash = bond_eth_hash(skb);
else
flow_dissect: use programable dissector in skb_flow_dissect and friends Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 20:56:16 +08:00
hash = (__force u32)flow.ports.ports;
net: Add full IPv6 addresses to flow_keys This patch adds full IPv6 addresses into flow_keys and uses them as input to the flow hash function. The implementation supports either IPv4 or IPv6 addresses in a union, and selector is used to determine how may words to input to jhash2. We also add flow_get_u32_dst and flow_get_u32_src functions which are used to get a u32 representation of the source and destination addresses. For IPv6, ipv6_addr_hash is called. These functions retain getting the legacy values of src and dst in flow_keys. With this patch, Ethertype and IP protocol are now included in the flow hash input. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-05 00:16:40 +08:00
hash ^= (__force u32)flow_get_u32_dst(&flow) ^
(__force u32)flow_get_u32_src(&flow);
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 19:39:25 +08:00
hash ^= (hash >> 16);
hash ^= (hash >> 8);
bonding: Changed hashing function to just provide hash Modified the hash function to return just hash separating from the modulo operation that can be performed by the caller. This is to make way for the tlb mode to use the same hashing policies that are used in the 802.3ad and Xor mode. Change-Id: I276609e87e0ca213c4d1b17b79c5e0b0f3d0dd6f Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:15 +08:00
return hash;
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------- Device entry points ----------------------------*/
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
static void bond_work_init_all(struct bonding *bond)
{
INIT_DELAYED_WORK(&bond->mcast_work,
bond_resend_igmp_join_requests_delayed);
INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP)
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon);
else
INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon);
INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler);
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
}
static void bond_work_cancel_all(struct bonding *bond)
{
cancel_delayed_work_sync(&bond->mii_work);
cancel_delayed_work_sync(&bond->arp_work);
cancel_delayed_work_sync(&bond->alb_work);
cancel_delayed_work_sync(&bond->ad_work);
cancel_delayed_work_sync(&bond->mcast_work);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
cancel_delayed_work_sync(&bond->slave_arr_work);
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_open(struct net_device *bond_dev)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding:reset backup and inactive flag of slave Eduard Sinelnikov (eduard.sinelnikov@gmail.com) found that if we change bonding mode from active backup to round robin, some slaves are still keeping "backup", and won't transmit packets. As Jay Vosburgh(fubar@us.ibm.com) pointed out that we can work around that by removing the bond_is_active_slave() check, because the "backup" flag is only meaningful for active backup mode. But if we just simply ignore the bond_is_active_slave() check, the transmission will work fine, but we can't maintain the correct value of "backup" flag for each slaves, though it is meaningless for other mode than active backup. I'd like to reset "backup" and "inactive" flag in bond_open, thus we can keep the correct value of them. As for bond_is_active_slave(), I'd like to prepare another patch to handle it. V2: Use C style comment. Move read_lock(&bond->curr_slave_lock). Replace restore with reset, for active backup mode, it means "restore", but for other modes, it means "reset". Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15 23:57:35 +08:00
struct slave *slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding:reset backup and inactive flag of slave Eduard Sinelnikov (eduard.sinelnikov@gmail.com) found that if we change bonding mode from active backup to round robin, some slaves are still keeping "backup", and won't transmit packets. As Jay Vosburgh(fubar@us.ibm.com) pointed out that we can work around that by removing the bond_is_active_slave() check, because the "backup" flag is only meaningful for active backup mode. But if we just simply ignore the bond_is_active_slave() check, the transmission will work fine, but we can't maintain the correct value of "backup" flag for each slaves, though it is meaningless for other mode than active backup. I'd like to reset "backup" and "inactive" flag in bond_open, thus we can keep the correct value of them. As for bond_is_active_slave(), I'd like to prepare another patch to handle it. V2: Use C style comment. Move read_lock(&bond->curr_slave_lock). Replace restore with reset, for active backup mode, it means "restore", but for other modes, it means "reset". Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15 23:57:35 +08:00
/* reset slave->backup and slave->inactive */
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (bond_has_slaves(bond)) {
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: add proper __rcu annotation for curr_active_slave RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 21:56:55 +08:00
if (bond_uses_primary(bond) &&
slave != rcu_access_pointer(bond->curr_active_slave)) {
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
bonding: fix bond_open() don't always set slave active flag Mode 802.3ad, fix incorrect bond slave active state when slave is not in active aggregator. During bond_open(), the bonding driver always sets the slave active flag to true if the bond is not in active-backup, alb, or tlb modes. Bonding should let the aggregator selection logic set the active flag when in 802.3ad mode. Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 14:16:58 +08:00
} else if (BOND_MODE(bond) != BOND_MODE_8023AD) {
bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for 802.3ad mode The problem was introduced by the commit 1d3ee88ae0d (bonding: add netlink attributes to slave link dev). The bond_set_active_slave() and bond_set_backup_slave() will use rtmsg_ifinfo to send slave's states, so these two functions should be called in RTNL. In 802.3ad mode, acquiring RTNL for the __enable_port and __disable_port cases is difficult, as those calls generally already hold the state machine lock, and cannot unconditionally call rtnl_lock because either they already hold RTNL (for calls via bond_3ad_unbind_slave) or due to the potential for deadlock with bond_3ad_adapter_speed_changed, bond_3ad_adapter_duplex_changed, bond_3ad_link_change, or bond_3ad_update_lacp_rate. All four of those are called with RTNL held, and acquire the state machine lock second. The calling contexts for __enable_port and __disable_port already hold the state machine lock, and may or may not need RTNL. According to the Jay's opinion, I don't think it is a problem that the slave don't send notify message synchronously when the status changed, normally the state machine is running every 100 ms, send the notify message at the end of the state machine if the slave's state changed should be better. I fix the problem through these steps: 1). add a new function bond_set_slave_state() which could change the slave's state and call rtmsg_ifinfo() according to the input parameters called notify. 2). Add a new slave parameter which called should_notify, if the slave's state changed and don't notify yet, the parameter will be set to 1, and then if the slave's state changed again, the param will be set to 0, it indicate that the slave's state has been restored, no need to notify any one. 3). the __enable_port and __disable_port should not call rtmsg_ifinfo in the state machine lock, any change in the state of slave could set a flag in the slave, it will indicated that an rtmsg_ifinfo should be called at the end of the state machine. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26 11:05:22 +08:00
bond_set_slave_active_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
bonding:reset backup and inactive flag of slave Eduard Sinelnikov (eduard.sinelnikov@gmail.com) found that if we change bonding mode from active backup to round robin, some slaves are still keeping "backup", and won't transmit packets. As Jay Vosburgh(fubar@us.ibm.com) pointed out that we can work around that by removing the bond_is_active_slave() check, because the "backup" flag is only meaningful for active backup mode. But if we just simply ignore the bond_is_active_slave() check, the transmission will work fine, but we can't maintain the correct value of "backup" flag for each slaves, though it is meaningless for other mode than active backup. I'd like to reset "backup" and "inactive" flag in bond_open, thus we can keep the correct value of them. As for bond_is_active_slave(), I'd like to prepare another patch to handle it. V2: Use C style comment. Move read_lock(&bond->curr_slave_lock). Replace restore with reset, for active backup mode, it means "restore", but for other modes, it means "reset". Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15 23:57:35 +08:00
}
}
}
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
bond_work_init_all(bond);
bonding: rejoin multicast groups on VLANs During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:57 +08:00
bonding: add and use bond_is_lb() Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10 15:07:13 +08:00
if (bond_is_lb(bond)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* bond_alb_initialize must be called before the timer
* is started.
*/
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (bond_alb_initialize(bond, (BOND_MODE(bond) == BOND_MODE_ALB)))
bonding: bond_open error return value The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-26 07:34:15 +08:00
return -ENOMEM;
bonding: Add tlb_dynamic_lb parameter for tlb mode The aggresive load balancing causes packet re-ordering as active flows are moved from a slave to another within the group. Sometime this aggresive lb is not necessary if the preference is for less re-ordering. This parameter if used with value "0" disables this dynamic flow shuffling minimizing packet re-ordering. Of course the side effect is that it has to live with the static load balancing that the hashing distribution provides. This impact is less severe if the correct xmit-hashing-policy is used for the tlb setup. The default value of the parameter is set to "1" mimicing the earlier behavior. Ran the netperf test with 200 stream for 1 min between two hosts with 4x1G trunk (xmit-lb mode with xmit-policy L3+4) before and after these changes. Following was the command used for those 200 instances - netperf -t TCP_RR -l 60 -s 5 -H <host> -- -r81920,81920 Transactions per second: Before change: 1,367.11 After change: 1,470.65 Change-Id: Ie3f75c77282cf602e83a6e833c6eb164e72a0990 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:22 +08:00
if (bond->params.tlb_dynamic_lb)
queue_delayed_work(bond->wq, &bond->alb_work, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
if (bond->params.miimon) /* link check interval, in milliseconds. */
Convert bonding timers to workqueues Convert bonding timers to workqueues. This converts the various monitor functions to run in periodic work queues instead of timers. This patch introduces the framework and convers the calls, but does not resolve various locking issues, and does not stand alone. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:45 +08:00
queue_delayed_work(bond->wq, &bond->mii_work, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
Convert bonding timers to workqueues Convert bonding timers to workqueues. This converts the various monitor functions to run in periodic work queues instead of timers. This patch introduces the framework and convers the calls, but does not resolve various locking issues, and does not stand alone. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:45 +08:00
queue_delayed_work(bond->wq, &bond->arp_work, 0);
bonding: always set recv_probe to bond_arp_rcv in arp monitor Currently we only set bond_arp_rcv() if we're using arp_validate, however this makes us skip updating last_arp_rx if we're not validating incoming ARPs - thus, if arp_validate is off, last_arp_rx will never be updated. Fix this by always setting up recv_probe = bond_arp_rcv, even if we're not using arp_validate. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 14:48:39 +08:00
bond->recv_probe = bond_arp_rcv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
Convert bonding timers to workqueues Convert bonding timers to workqueues. This converts the various monitor functions to run in periodic work queues instead of timers. This patch introduces the framework and convers the calls, but does not resolve various locking issues, and does not stand alone. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:45 +08:00
queue_delayed_work(bond->wq, &bond->ad_work, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* register to receive LACPDUs */
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
bond->recv_probe = bond_3ad_lacpdu_recv;
bonding: alternate agg selection policies for 802.3ad This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-05 09:51:16 +08:00
bond_3ad_initiate_agg_selection(bond, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
if (bond_mode_uses_xmit_hash(bond))
bond_update_slave_arr(bond, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
static int bond_close(struct net_device *bond_dev)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29 09:31:31 +08:00
bond_work_cancel_all(bond);
bonding: simplify and fix peer notification This patch aims to remove a use of the bond->lock for mutual exclusion which will later allow easier migration to RCU of the users of this functionality. We use RTNL as a synchronizing mechanism since it's always held when send_peer_notif is set, and when it is decremented from the notifier function. We can also drop some locking, and fix the leakage of the send_peer_notif counter. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 19:51:38 +08:00
bond->send_peer_notif = 0;
bonding: trivial: remove outdated comment and braces We don't have to release all slaves when closing the bond dev, so remove the outdated comment and the braces around the left single statement. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 19:51:39 +08:00
if (bond_is_lb(bond))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_alb_deinitialize(bond);
bonding: move processing of recv handlers into handle_frame() Since now when bonding uses rx_handler, all traffic going into bond device goes thru bond_handle_frame. So there's no need to go back into bonding code later via ptype handlers. This patch converts original ptype handlers into "bonding receive probes". These functions are called from bond_handle_frame and they are registered per-mode. Note that vlan packets are also handled because they are always untagged thanks to vlan_untag() Note that this also allows arpmon for eth-bond-bridge-vlan topology. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19 11:48:16 +08:00
bond->recv_probe = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
net: fix 64 bit counters on 32 bit arches There is a small possibility that a reader gets incorrect values on 32 bit arches. SNMP applications could catch incorrect counters when a 32bit high part is changed by another stats consumer/provider. One way to solve this is to add a rtnl_link_stats64 param to all ndo_get_stats64() methods, and also add such a parameter to dev_get_stats(). Rule is that we are not allowed to use dev->stats64 as a temporary storage for 64bit stats, but a caller provided area (usually on stack) Old drivers (only providing get_stats() method) need no changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 05:58:56 +08:00
static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
struct rtnl_link_stats64 *stats)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
net: fix 64 bit counters on 32 bit arches There is a small possibility that a reader gets incorrect values on 32 bit arches. SNMP applications could catch incorrect counters when a 32bit high part is changed by another stats consumer/provider. One way to solve this is to add a rtnl_link_stats64 param to all ndo_get_stats64() methods, and also add such a parameter to dev_get_stats(). Rule is that we are not allowed to use dev->stats64 as a temporary storage for 64bit stats, but a caller provided area (usually on stack) Old drivers (only providing get_stats() method) need no changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 05:58:56 +08:00
struct rtnl_link_stats64 temp;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct slave *slave;
bonding: make global bonding stats more reliable As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29 10:34:37 +08:00
memcpy(stats, &bond->bond_stats, sizeof(*stats));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
net: Enable 64-bit net device statistics on 32-bit architectures Use struct rtnl_link_stats64 as the statistics structure. On 32-bit architectures, insert 32 bits of padding after/before each field of struct net_device_stats to make its layout compatible with struct rtnl_link_stats64. Add an anonymous union in net_device; move stats into the union and add struct rtnl_link_stats64 stats64. Add net_device_ops::ndo_get_stats64, implementations of which will return a pointer to struct rtnl_link_stats64. Drivers that implement this operation must not update the structure asynchronously. Change dev_get_stats() to call ndo_get_stats64 if available, and to return a pointer to struct rtnl_link_stats64. Change callers of dev_get_stats() accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-08 15:19:54 +08:00
const struct rtnl_link_stats64 *sstats =
net: fix 64 bit counters on 32 bit arches There is a small possibility that a reader gets incorrect values on 32 bit arches. SNMP applications could catch incorrect counters when a 32bit high part is changed by another stats consumer/provider. One way to solve this is to add a rtnl_link_stats64 param to all ndo_get_stats64() methods, and also add such a parameter to dev_get_stats(). Rule is that we are not allowed to use dev->stats64 as a temporary storage for 64bit stats, but a caller provided area (usually on stack) Old drivers (only providing get_stats() method) need no changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 05:58:56 +08:00
dev_get_stats(slave->dev, &temp);
bonding: make global bonding stats more reliable As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29 10:34:37 +08:00
struct rtnl_link_stats64 *pstats = &slave->slave_stats;
stats->rx_packets += sstats->rx_packets - pstats->rx_packets;
stats->rx_bytes += sstats->rx_bytes - pstats->rx_bytes;
stats->rx_errors += sstats->rx_errors - pstats->rx_errors;
stats->rx_dropped += sstats->rx_dropped - pstats->rx_dropped;
stats->tx_packets += sstats->tx_packets - pstats->tx_packets;;
stats->tx_bytes += sstats->tx_bytes - pstats->tx_bytes;
stats->tx_errors += sstats->tx_errors - pstats->tx_errors;
stats->tx_dropped += sstats->tx_dropped - pstats->tx_dropped;
stats->multicast += sstats->multicast - pstats->multicast;
stats->collisions += sstats->collisions - pstats->collisions;
stats->rx_length_errors += sstats->rx_length_errors - pstats->rx_length_errors;
stats->rx_over_errors += sstats->rx_over_errors - pstats->rx_over_errors;
stats->rx_crc_errors += sstats->rx_crc_errors - pstats->rx_crc_errors;
stats->rx_frame_errors += sstats->rx_frame_errors - pstats->rx_frame_errors;
stats->rx_fifo_errors += sstats->rx_fifo_errors - pstats->rx_fifo_errors;
stats->rx_missed_errors += sstats->rx_missed_errors - pstats->rx_missed_errors;
stats->tx_aborted_errors += sstats->tx_aborted_errors - pstats->tx_aborted_errors;
stats->tx_carrier_errors += sstats->tx_carrier_errors - pstats->tx_carrier_errors;
stats->tx_fifo_errors += sstats->tx_fifo_errors - pstats->tx_fifo_errors;
stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors - pstats->tx_heartbeat_errors;
stats->tx_window_errors += sstats->tx_window_errors - pstats->tx_window_errors;
/* save off the slave stats for the next run */
memcpy(pstats, sstats, sizeof(*sstats));
}
memcpy(&bond->bond_stats, stats, sizeof(*stats));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return stats;
}
static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
{
bonding: remove bond_ioctl_change_active() no longer needed since bond_option_active_slave_set() can be used instead. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 23:43:36 +08:00
struct bonding *bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct net_device *slave_dev = NULL;
struct ifbond k_binfo;
struct ifbond __user *u_binfo = NULL;
struct ifslave k_sinfo;
struct ifslave __user *u_sinfo = NULL;
struct mii_ioctl_data *mii = NULL;
bonding: convert active_slave to use the new option API This patch adds the necessary changes so active_slave would use the new bonding option API. Also some trivial/style fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:35 +08:00
struct bond_opt_value newval;
netns: bond: allow unprivileged users to control bond device reduce the permission check of bond device's ioctl. allow the userns root to control the bond device. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-01 00:31:00 +08:00
struct net *net;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int res = 0;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "bond_ioctl: cmd=%d\n", cmd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (cmd) {
case SIOCGMIIPHY:
mii = if_mii(ifr);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (!mii)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mii->phy_id = 0;
/* Fall Through */
case SIOCGMIIREG:
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* We do this again just in case we were called by SIOCGMIIREG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* instead of SIOCGMIIPHY.
*/
mii = if_mii(ifr);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (!mii)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mii->reg_num == 1) {
mii->val_out = 0;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (netif_carrier_ok(bond->dev))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mii->val_out = BMSR_LSTATUS;
}
return 0;
case BOND_INFO_QUERY_OLD:
case SIOCBONDINFOQUERY:
u_binfo = (struct ifbond __user *)ifr->ifr_data;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EFAULT;
res = bond_info_query(bond_dev, &k_binfo);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (res == 0 &&
copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return res;
case BOND_SLAVE_INFO_QUERY_OLD:
case SIOCBONDSLAVEINFOQUERY:
u_sinfo = (struct ifslave __user *)ifr->ifr_data;
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EFAULT;
res = bond_slave_info_query(bond_dev, &k_sinfo);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (res == 0 &&
copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return res;
default:
break;
}
netns: bond: allow unprivileged users to control bond device reduce the permission check of bond device's ioctl. allow the userns root to control the bond device. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-01 00:31:00 +08:00
net = dev_net(bond_dev);
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EPERM;
bonding: use __dev_get_by_name instead of dev_get_by_name to find interface The following call chain indicates that bond_do_ioctl() is protected under rtnl_lock. If we use __dev_get_by_name() instead of dev_get_by_name() to find interface handler in it, this would help us avoid to change reference counter of interface once. dev_ioctl() rtnl_lock() dev_ifsioc() bond_do_ioctl() rtnl_unlock() Additionally we also change the coding style in bond_do_ioctl(), letting it more readable for us. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 10:23:37 +08:00
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "slave_dev=%p:\n", slave_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (!slave_dev)
bonding: use __dev_get_by_name instead of dev_get_by_name to find interface The following call chain indicates that bond_do_ioctl() is protected under rtnl_lock. If we use __dev_get_by_name() instead of dev_get_by_name() to find interface handler in it, this would help us avoid to change reference counter of interface once. dev_ioctl() rtnl_lock() dev_ifsioc() bond_do_ioctl() rtnl_unlock() Additionally we also change the coding style in bond_do_ioctl(), letting it more readable for us. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 10:23:37 +08:00
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "slave_dev->name=%s:\n", slave_dev->name);
bonding: use __dev_get_by_name instead of dev_get_by_name to find interface The following call chain indicates that bond_do_ioctl() is protected under rtnl_lock. If we use __dev_get_by_name() instead of dev_get_by_name() to find interface handler in it, this would help us avoid to change reference counter of interface once. dev_ioctl() rtnl_lock() dev_ifsioc() bond_do_ioctl() rtnl_unlock() Additionally we also change the coding style in bond_do_ioctl(), letting it more readable for us. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 10:23:37 +08:00
switch (cmd) {
case BOND_ENSLAVE_OLD:
case SIOCBONDENSLAVE:
res = bond_enslave(bond_dev, slave_dev);
break;
case BOND_RELEASE_OLD:
case SIOCBONDRELEASE:
res = bond_release(bond_dev, slave_dev);
break;
case BOND_SETHWADDR_OLD:
case SIOCBONDSETHWADDR:
bond_set_dev_addr(bond_dev, slave_dev);
res = 0;
break;
case BOND_CHANGE_ACTIVE_OLD:
case SIOCBONDCHANGEACTIVE:
bonding: convert active_slave to use the new option API This patch adds the necessary changes so active_slave would use the new bonding option API. Also some trivial/style fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:35 +08:00
bond_opt_initstr(&newval, slave_dev->name);
res = __bond_opt_set(bond, BOND_OPT_ACTIVE_SLAVE, &newval);
bonding: use __dev_get_by_name instead of dev_get_by_name to find interface The following call chain indicates that bond_do_ioctl() is protected under rtnl_lock. If we use __dev_get_by_name() instead of dev_get_by_name() to find interface handler in it, this would help us avoid to change reference counter of interface once. dev_ioctl() rtnl_lock() dev_ifsioc() bond_do_ioctl() rtnl_unlock() Additionally we also change the coding style in bond_do_ioctl(), letting it more readable for us. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 10:23:37 +08:00
break;
default:
res = -EOPNOTSUPP;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
return res;
}
bonding: use ndo_change_rx_flags callback Benefit from use of ndo_change_rx_flags in handling change of promisc and allmulti. No need to store previous state locally. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 11:15:04 +08:00
static void bond_change_rx_flags(struct net_device *bond_dev, int change)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: use ndo_change_rx_flags callback Benefit from use of ndo_change_rx_flags in handling change of promisc and allmulti. No need to store previous state locally. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 11:15:04 +08:00
if (change & IFF_PROMISC)
bond_set_promiscuity(bond,
bond_dev->flags & IFF_PROMISC ? 1 : -1);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
bonding: use ndo_change_rx_flags callback Benefit from use of ndo_change_rx_flags in handling change of promisc and allmulti. No need to store previous state locally. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 11:15:04 +08:00
if (change & IFF_ALLMULTI)
bond_set_allmulti(bond,
bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
static void bond_set_rx_mode(struct net_device *bond_dev)
bonding: use ndo_change_rx_flags callback Benefit from use of ndo_change_rx_flags in handling change of promisc and allmulti. No need to store previous state locally. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 11:15:04 +08:00
{
struct bonding *bond = netdev_priv(bond_dev);
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
struct slave *slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: RCUify bond_set_rx_mode() Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not always the case: RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391) ... [<ffffffff81651ca5>] dump_stack+0x54/0x74 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding] [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70 [<ffffffff81558020>] dev_mc_add+0x10/0x20 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260 ... Fix this by using RCU primitives. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-29 03:18:56 +08:00
rcu_read_lock();
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (bond_uses_primary(bond)) {
bonding: RCUify bond_set_rx_mode() Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not always the case: RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391) ... [<ffffffff81651ca5>] dump_stack+0x54/0x74 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding] [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70 [<ffffffff81558020>] dev_mc_add+0x10/0x20 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260 ... Fix this by using RCU primitives. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-29 03:18:56 +08:00
slave = rcu_dereference(bond->curr_active_slave);
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
if (slave) {
dev_uc_sync(slave->dev, bond_dev);
dev_mc_sync(slave->dev, bond_dev);
}
} else {
bonding: RCUify bond_set_rx_mode() Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not always the case: RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391) ... [<ffffffff81651ca5>] dump_stack+0x54/0x74 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding] [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70 [<ffffffff81558020>] dev_mc_add+0x10/0x20 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260 ... Fix this by using RCU primitives. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-29 03:18:56 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
dev_uc_sync_multiple(slave->dev, bond_dev);
dev_mc_sync_multiple(slave->dev, bond_dev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: RCUify bond_set_rx_mode() Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not always the case: RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391) ... [<ffffffff81651ca5>] dump_stack+0x54/0x74 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding] [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70 [<ffffffff81558020>] dev_mc_add+0x10/0x20 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260 ... Fix this by using RCU primitives. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-29 03:18:56 +08:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
static int bond_neigh_init(struct neighbour *n)
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
{
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
struct bonding *bond = netdev_priv(n->dev);
const struct net_device_ops *slave_ops;
struct neigh_parms parms;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
struct slave *slave;
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
int ret;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
slave = bond_first_slave(bond);
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
if (!slave)
return 0;
slave_ops = slave->dev->netdev_ops;
if (!slave_ops->ndo_neigh_setup)
return 0;
parms.neigh_setup = NULL;
parms.neigh_cleanup = NULL;
ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
if (ret)
return ret;
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Assign slave's neigh_cleanup to neighbour in case cleanup is called
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
* after the last slave has been detached. Assumes that all slaves
* utilize the same neigh_cleanup (true at this writing as only user
* is ipoib).
*/
n->parms->neigh_cleanup = parms.neigh_cleanup;
if (!parms.neigh_setup)
return 0;
return parms.neigh_setup(n);
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* The bonding ndo_neigh_setup is called at init time beofre any
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
* slave exists. So we must declare proxy setup function which will
* be used at run time to resolve the actual slave neigh param setup.
bonding: modify only neigh_parms owned by us Otherwise, on neighbour creation, bond_neigh_init() will be called with a foreign netdev. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 01:07:39 +08:00
*
* It's also called by master devices (such as vlans) to setup their
* underlying devices. In that case - do nothing, we're already set up from
* our init.
net/bonding: correctly proxy slave neigh param setup ndo function The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 06:56:20 +08:00
*/
static int bond_neigh_setup(struct net_device *dev,
struct neigh_parms *parms)
{
bonding: modify only neigh_parms owned by us Otherwise, on neighbour creation, bond_neigh_init() will be called with a foreign netdev. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 01:07:39 +08:00
/* modify only our neigh_parms */
if (parms->dev == dev)
parms->neigh_setup = bond_neigh_init;
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
return 0;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Change the MTU of all of a master's slaves to match the master */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
struct slave *slave, *rollback_slave;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int res = 0;
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "bond=%p, new_mtu=%d\n", bond, new_mtu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "s %p c_m %p\n",
slave, slave->dev->netdev_ops->ndo_change_mtu);
[PATCH] bonding: spelling and whitespace corrections Minor spelling and whitespace corrections. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:50 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
res = dev_set_mtu(slave->dev, new_mtu);
if (res) {
/* If we failed to set the slave's mtu to the new value
* we must abort the operation even in ACTIVE_BACKUP
* mode, because if we allow the backup slaves to have
* different mtu values than the active slave we'll
* need to change their mtu when doing a failover. That
* means changing their mtu from timer context, which
* is probably not a good idea.
*/
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "err %d %s\n", res,
slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto unwind;
}
}
bond_dev->mtu = new_mtu;
return 0;
unwind:
/* unwind from head to the slave that failed */
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, rollback_slave, iter) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int tmp_res;
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
if (rollback_slave == slave)
break;
tmp_res = dev_set_mtu(rollback_slave->dev, bond_dev->mtu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tmp_res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "unwind err %d dev %s\n",
tmp_res, rollback_slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
return res;
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Change HW address
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Note that many devices must be down to change the HW address, and
* downing the master releases all slaves. We can make bonds full of
* bonding devices to test this, however.
*/
static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
struct slave *slave, *rollback_slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct sockaddr *sa = addr, tmp_sa;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int res = 0;
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
if (BOND_MODE(bond) == BOND_MODE_ALB)
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
return bond_alb_set_mac_address(bond_dev, addr);
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "bond=%p\n", bond);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: disallow change of MAC if fail_over_mac enabled Currently, if fail_over_mac is set to active, then attempts to change the MAC of the bond itself silently fail. However, if fail_over_mac is set to follow, changes are permitted. Permitting the bond's MAC to change with fail_over_mac=follow will disrupt the follow functionality, which normally controls the assignment of MAC address to the bond and its slaves, and can cause multiple ports to be assigned the same MAC address. which will interfere with the functioning of the device (where the device here is a virtualization-aware card for s390, qeth). Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:31 +08:00
/* If fail_over_mac is enabled, do nothing and return success.
* Returning an error causes ifenslave to fail.
net/bonding: Optionally allow ethernet slaves to keep own MAC Update the "don't change MAC of slaves" functionality added in previous changes to be a generic option, rather than something tied to IB devices, as it's occasionally useful for regular ethernet devices as well. Adds "fail_over_mac" option (which is automatically enabled for IB slaves), applicable only to active-backup mode. Includes documentation update. Updates bonding driver version to 3.2.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:57:24 +08:00
*/
bonding: fail_over_mac should only affect AB mode in bond_set_mac_address() The fail_over_mac could be set to active or follow in any time for all modes, so if the fail_over_mac is not none and the current mode is not active-backup, the bond_set_mac_address() could not change the master and slave's MAC address. In bond_set_mac_address(), the fail_over_mac should only affect AB mode, so modify to check the mode in addition to fail_over_mac when setting bond's MAC address. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25 13:00:57 +08:00
if (bond->params.fail_over_mac &&
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP)
net/bonding: Optionally allow ethernet slaves to keep own MAC Update the "don't change MAC of slaves" functionality added in previous changes to be a generic option, rather than something tied to IB devices, as it's occasionally useful for regular ethernet devices as well. Adds "fail_over_mac" option (which is automatically enabled for IB slaves), applicable only to active-backup mode. Includes documentation update. Updates bonding driver version to 3.2.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:57:24 +08:00
return 0;
net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:43:39 +08:00
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (!is_valid_ether_addr(sa->sa_data))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EADDRNOTAVAIL;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "slave %p %s\n", slave, slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
res = dev_set_mac_address(slave->dev, addr);
if (res) {
/* TODO: consider downing the slave
* and retry ?
* User should expect communications
* breakage anyway until ARP finish
* updating, so...
*/
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "err %d %s\n", res, slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto unwind;
}
}
/* success */
memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
return 0;
unwind:
memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
tmp_sa.sa_family = bond_dev->type;
/* unwind from head to the slave that failed */
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, rollback_slave, iter) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int tmp_res;
bonding: remove bond_for_each_slave_continue_reverse() We only use it in rollback scenarios and can easily use the standart bond_for_each_dev() instead. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:13 +08:00
if (rollback_slave == slave)
break;
tmp_res = dev_set_mac_address(rollback_slave->dev, &tmp_sa);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tmp_res) {
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "unwind err %d dev %s\n",
tmp_res, rollback_slave->dev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
return res;
}
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
/**
* bond_xmit_slave_id - transmit skb through slave with slave_id
* @bond: bonding device that is transmitting
* @skb: buffer to transmit
* @slave_id: slave id up to slave_cnt-1 through which to transmit
*
* This function tries to transmit through slave with slave_id but in case
* it fails, it tries to find the first available slave for transmission.
* The skb is consumed in all cases, thus the function is void.
*/
bonding: make local function static bond_xmit_slave_id is only used in main. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-30 03:41:25 +08:00
static void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id)
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
{
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
struct slave *slave;
int i = slave_id;
/* Here we start from the slave with slave_id */
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
if (--i < 0) {
bonding: rename {, bond_}slave_can_tx and clean it up CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:58 +08:00
if (bond_slave_can_tx(slave)) {
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
bond_dev_queue_xmit(bond, skb, slave->dev);
return;
}
}
}
/* Here we start from the first slave up to slave_id */
i = slave_id;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
if (--i < 0)
break;
bonding: rename {, bond_}slave_can_tx and clean it up CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:58 +08:00
if (bond_slave_can_tx(slave)) {
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
bond_dev_queue_xmit(bond, skb, slave->dev);
return;
}
}
/* no slave that can tx has been found */
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(bond->dev, skb);
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
}
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
/**
* bond_rr_gen_slave_id - generate slave id based on packets_per_slave
* @bond: bonding device to use
*
* Based on the value of the bonding device's packets_per_slave parameter
* this function generates a slave id, which is usually used as the next
* slave to transmit through.
*/
static u32 bond_rr_gen_slave_id(struct bonding *bond)
{
u32 slave_id;
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
struct reciprocal_value reciprocal_packets_per_slave;
int packets_per_slave = bond->params.packets_per_slave;
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
switch (packets_per_slave) {
case 0:
slave_id = prandom_u32();
break;
case 1:
slave_id = bond->rr_tx_counter;
break;
default:
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
reciprocal_packets_per_slave =
bond->params.reciprocal_packets_per_slave;
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
slave_id = reciprocal_divide(bond->rr_tx_counter,
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
reciprocal_packets_per_slave);
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
break;
}
bond->rr_tx_counter++;
return slave_id;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: fix broken multicast with round-robin mode Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 22:49:05 +08:00
struct iphdr *iph = ip_hdr(skb);
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
struct slave *slave;
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
u32 slave_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
/* Start with the curr_active_slave that joined the bond as the
bonding: fix broken multicast with round-robin mode Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 22:49:05 +08:00
* default for sending IGMP traffic. For failover purposes one
* needs to maintain some consistency for the interface that will
* send the join/membership reports. The curr_active_slave found
* will send all of this type of traffic.
bonding: Convert balance-rr transmit to new locking Change locking in balance-rr transmit processing to use a free running counter to determine which slave to transmit on. Instead, a free-running counter is maintained, and modulo arithmetic used to select a slave for transmit. This removes lock operations from the TX path, and eliminates a deadlock introduced by the conversion to work queues. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 08:37:47 +08:00
*/
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) {
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
slave = rcu_dereference(bond->curr_active_slave);
bonding: slight optimization for bond_xmit_roundrobin() When the slave is the curr_active_slave, no need to check whether the slave is active or not, it is always active. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 21:04:57 +08:00
if (slave)
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bond_xmit_slave_id(bond, skb, 0);
bonding: fix broken multicast with round-robin mode Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25 22:49:05 +08:00
} else {
bonding: fix div by zero while enslaving and transmitting The problem is that the slave is first linked and slave_cnt is incremented afterwards leading to a div by zero in the modes that use it as a modulus. What happens is that in bond_start_xmit() bond_has_slaves() is used to evaluate further transmission and it becomes true after the slave is linked in, but when slave_cnt is used in the xmit path it is still 0, so fetch it once and transmit based on that. Since it is used only in round-robin and XOR modes, the fix is only for them. Thanks to Eric Dumazet for pointing out the fault in my first try to fix this. Call trace (took it out of net-next kernel, but it's the same with net): [46934.330038] divide error: 0000 [#1] SMP [46934.330041] Modules linked in: bonding(O) 9p fscache snd_hda_codec_generic crct10dif_pclmul [46934.330041] bond0: Enslaving eth1 as an active interface with an up link [46934.330051] ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi floppy [last unloaded: bonding] [46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G O 3.17.0-rc4+ #27 [46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti: ffff88005b728000 [46934.330059] RIP: 0010:[<ffffffffa0198c33>] [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330060] RSP: 0018:ffff88005b72b7f8 EFLAGS: 00010246 [46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX: 000000000000002a [46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI: ffff88004b077940 [46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09: ffff88004a83e000 [46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12: ffff88004b3f0500 [46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15: ffff88004b077940 [46934.330063] FS: 00007fbd91a4c740(0000) GS:ffff88005f080000(0000) knlGS:0000000000000000 [46934.330064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4: 00000000000406e0 [46934.330069] Stack: [46934.330071] ffffffff811e6169 00000000e772fa05 ffff88004b077000 ffff88004b3f0500 [46934.330072] ffffffff81d17d18 000000000000002a 0000000000000000 ffff88005b72b8a0 [46934.330073] ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4 ffff88005b302000 [46934.330073] Call Trace: [46934.330077] [<ffffffff811e6169>] ? __kmalloc_node_track_caller+0x119/0x300 [46934.330084] [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410 [46934.330086] [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90 [46934.330088] [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590 [46934.330089] [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20 [46934.330090] [<ffffffff8168f022>] arp_xmit+0x22/0x60 [46934.330091] [<ffffffff8168f090>] arp_send.part.16+0x30/0x40 [46934.330092] [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0 [46934.330094] [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0 [46934.330096] [<ffffffff8162875a>] neigh_probe+0x4a/0x70 [46934.330097] [<ffffffff8162979c>] __neigh_event_send+0xac/0x230 [46934.330098] [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220 [46934.330100] [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0 [46934.330101] [<ffffffff81660478>] ip_finish_output+0x1f8/0x860 [46934.330102] [<ffffffff81661f08>] ip_output+0x58/0x90 [46934.330103] [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0 [46934.330104] [<ffffffff81661640>] ip_local_out_sk+0x30/0x40 [46934.330105] [<ffffffff81662a66>] ip_send_skb+0x16/0x50 [46934.330106] [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40 [46934.330107] [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30 [46934.330110] [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60 [46934.330111] [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0 [46934.330113] [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0 [46934.330114] [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0 [46934.330115] bond0: Adding slave eth2 [46934.330116] [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0 [46934.330118] [<ffffffff81603248>] ? move_addr_to_kernel.part.20+0x28/0x80 [46934.330121] [<ffffffff811b4477>] ? might_fault+0x47/0x50 [46934.330122] [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0 [46934.330125] [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530 [46934.330127] [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50 [46934.330129] [<ffffffff81242b38>] ? fsnotify+0x238/0x310 [46934.330130] [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90 [46934.330131] [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20 [46934.330134] [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b [46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9 1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c 89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00 [46934.330146] RIP [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330146] RSP <ffff88005b72b7f8> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> Fixes: 278b208375 ("bonding: initial RCU conversion") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 23:38:18 +08:00
int slave_cnt = ACCESS_ONCE(bond->slave_cnt);
if (likely(slave_cnt)) {
slave_id = bond_rr_gen_slave_id(bond);
bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
} else {
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(bond_dev, skb);
bonding: fix div by zero while enslaving and transmitting The problem is that the slave is first linked and slave_cnt is incremented afterwards leading to a div by zero in the modes that use it as a modulus. What happens is that in bond_start_xmit() bond_has_slaves() is used to evaluate further transmission and it becomes true after the slave is linked in, but when slave_cnt is used in the xmit path it is still 0, so fetch it once and transmit based on that. Since it is used only in round-robin and XOR modes, the fix is only for them. Thanks to Eric Dumazet for pointing out the fault in my first try to fix this. Call trace (took it out of net-next kernel, but it's the same with net): [46934.330038] divide error: 0000 [#1] SMP [46934.330041] Modules linked in: bonding(O) 9p fscache snd_hda_codec_generic crct10dif_pclmul [46934.330041] bond0: Enslaving eth1 as an active interface with an up link [46934.330051] ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi floppy [last unloaded: bonding] [46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G O 3.17.0-rc4+ #27 [46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti: ffff88005b728000 [46934.330059] RIP: 0010:[<ffffffffa0198c33>] [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330060] RSP: 0018:ffff88005b72b7f8 EFLAGS: 00010246 [46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX: 000000000000002a [46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI: ffff88004b077940 [46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09: ffff88004a83e000 [46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12: ffff88004b3f0500 [46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15: ffff88004b077940 [46934.330063] FS: 00007fbd91a4c740(0000) GS:ffff88005f080000(0000) knlGS:0000000000000000 [46934.330064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4: 00000000000406e0 [46934.330069] Stack: [46934.330071] ffffffff811e6169 00000000e772fa05 ffff88004b077000 ffff88004b3f0500 [46934.330072] ffffffff81d17d18 000000000000002a 0000000000000000 ffff88005b72b8a0 [46934.330073] ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4 ffff88005b302000 [46934.330073] Call Trace: [46934.330077] [<ffffffff811e6169>] ? __kmalloc_node_track_caller+0x119/0x300 [46934.330084] [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410 [46934.330086] [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90 [46934.330088] [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590 [46934.330089] [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20 [46934.330090] [<ffffffff8168f022>] arp_xmit+0x22/0x60 [46934.330091] [<ffffffff8168f090>] arp_send.part.16+0x30/0x40 [46934.330092] [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0 [46934.330094] [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0 [46934.330096] [<ffffffff8162875a>] neigh_probe+0x4a/0x70 [46934.330097] [<ffffffff8162979c>] __neigh_event_send+0xac/0x230 [46934.330098] [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220 [46934.330100] [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0 [46934.330101] [<ffffffff81660478>] ip_finish_output+0x1f8/0x860 [46934.330102] [<ffffffff81661f08>] ip_output+0x58/0x90 [46934.330103] [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0 [46934.330104] [<ffffffff81661640>] ip_local_out_sk+0x30/0x40 [46934.330105] [<ffffffff81662a66>] ip_send_skb+0x16/0x50 [46934.330106] [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40 [46934.330107] [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30 [46934.330110] [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60 [46934.330111] [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0 [46934.330113] [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0 [46934.330114] [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0 [46934.330115] bond0: Adding slave eth2 [46934.330116] [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0 [46934.330118] [<ffffffff81603248>] ? move_addr_to_kernel.part.20+0x28/0x80 [46934.330121] [<ffffffff811b4477>] ? might_fault+0x47/0x50 [46934.330122] [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0 [46934.330125] [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530 [46934.330127] [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50 [46934.330129] [<ffffffff81242b38>] ? fsnotify+0x238/0x310 [46934.330130] [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90 [46934.330131] [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20 [46934.330134] [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b [46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9 1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c 89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00 [46934.330146] RIP [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330146] RSP <ffff88005b72b7f8> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> Fixes: 278b208375 ("bonding: initial RCU conversion") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 23:38:18 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
net: convert remaining non-symbolic return values in ndo_start_xmit() functions This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 10:23:38 +08:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* In active-backup mode, we know that bond->curr_active_slave is always valid if
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* the bond has a usable interface.
*/
static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: remove unnecessary read_locks of curr_slave_lock In all the cases we already hold bond->lock for reading, so the slave can't get away and the check != NULL is sufficient. curr_active_slave can still change after the read_lock is unlocked prior to use of the dereferenced value, so there's no need for it. It either contains a valid slave which we use (and can't get away), or it is NULL which is checked. In some places the read_lock of curr_slave_lock was left because we need it not to change while performing some action (e.g. syncing current active slave's addresses, sending ARP requests through the active slave) such cases will be dealt with individually while converting to RCU. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:48 +08:00
struct slave *slave;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
slave = rcu_dereference(bond->curr_active_slave);
bonding: remove unnecessary read_locks of curr_slave_lock In all the cases we already hold bond->lock for reading, so the slave can't get away and the check != NULL is sufficient. curr_active_slave can still change after the read_lock is unlocked prior to use of the dereferenced value, so there's no need for it. It either contains a valid slave which we use (and can't get away), or it is NULL which is checked. In some places the read_lock of curr_slave_lock was left because we need it not to change while performing some action (e.g. syncing current active slave's addresses, sending ARP requests through the active slave) such cases will be dealt with individually while converting to RCU. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:48 +08:00
if (slave)
bonding: factor out slave id tx code and simplify xmit paths I factored out the tx xmit code which relies on slave id in bond_xmit_slave_id. It is global because later it can be used also in 3ad mode xmit. Unnecessary obvious comments are removed. Active-backup mode is simplified because bond_dev_queue_xmit always consumes the skb. bond_xmit_xor becomes one line because of bond_xmit_slave_id. bond_for_each_slave_from is not used in bond_xmit_slave_id because later when RCU is used we can avoid important race condition by using standard rculist routines. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:50 +08:00
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(bond_dev, skb);
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
net: convert remaining non-symbolic return values in ndo_start_xmit() functions This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 10:23:38 +08:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
/* Use this to update slave_array when (a) it's not appropriate to update
* slave_array right away (note that update_slave_array() may sleep)
* and / or (b) RTNL is not held.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
queue_delayed_work(bond->wq, &bond->slave_arr_work, delay);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
/* Slave array work handler. Holds only RTNL */
static void bond_slave_arr_handler(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
slave_arr_work.work);
int ret;
if (!rtnl_trylock())
goto err;
ret = bond_update_slave_arr(bond, NULL);
rtnl_unlock();
if (ret) {
pr_warn_ratelimited("Failed to update slave array from WT\n");
goto err;
}
return;
err:
bond_slave_arr_work_rearm(bond, 1);
}
/* Build the usable slaves array in control path for modes that use xmit-hash
* to determine the slave interface -
* (a) BOND_MODE_8023AD
* (b) BOND_MODE_XOR
* (c) BOND_MODE_TLB && tlb_dynamic_lb == 0
*
* The caller is expected to hold RTNL only and NO other lock!
*/
int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave)
{
struct slave *slave;
struct list_head *iter;
struct bond_up_slave *new_arr, *old_arr;
int agg_id = 0;
int ret = 0;
#ifdef CONFIG_LOCKDEP
WARN_ON(lockdep_is_held(&bond->mode_lock));
#endif
new_arr = kzalloc(offsetof(struct bond_up_slave, arr[bond->slave_cnt]),
GFP_KERNEL);
if (!new_arr) {
ret = -ENOMEM;
pr_err("Failed to build slave-array.\n");
goto out;
}
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct ad_info ad_info;
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
pr_debug("bond_3ad_get_active_agg_info failed\n");
kfree_rcu(new_arr, rcu);
/* No active aggragator means it's not safe to use
* the previous array.
*/
old_arr = rtnl_dereference(bond->slave_arr);
if (old_arr) {
RCU_INIT_POINTER(bond->slave_arr, NULL);
kfree_rcu(old_arr, rcu);
}
goto out;
}
agg_id = ad_info.aggregator_id;
}
bond_for_each_slave(bond, slave, iter) {
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct aggregator *agg;
agg = SLAVE_AD_INFO(slave)->port.aggregator;
if (!agg || agg->aggregator_identifier != agg_id)
continue;
}
if (!bond_slave_can_tx(slave))
continue;
if (skipslave == slave)
continue;
new_arr->arr[new_arr->count++] = slave;
}
old_arr = rtnl_dereference(bond->slave_arr);
rcu_assign_pointer(bond->slave_arr, new_arr);
if (old_arr)
kfree_rcu(old_arr, rcu);
out:
if (ret != 0 && skipslave) {
int idx;
/* Rare situation where caller has asked to skip a specific
* slave but allocation failed (most likely!). BTW this is
* only possible when the call is initiated from
* __bond_release_one(). In this situation; overwrite the
* skipslave entry in the array with the last entry from the
* array to avoid a situation where the xmit path may choose
* this to-be-skipped slave to send a packet out.
*/
old_arr = rtnl_dereference(bond->slave_arr);
for (idx = 0; idx < old_arr->count; idx++) {
if (skipslave == old_arr->arr[idx]) {
old_arr->arr[idx] =
old_arr->arr[old_arr->count-1];
old_arr->count--;
break;
}
}
}
return ret;
}
/* Use this Xmit function for 3AD as well as XOR modes. The current
* usable slave array is formed in the control path. The xmit function
* just calculates hash and sends the packet out.
*/
bonding: cleanup and remove dead code fix sparse warning about non-static function drivers/net/bonding/bond_main.c:3737:5: warning: symbol 'bond_3ad_xor_xmit' was not declared. Should it be static? Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 14:17:01 +08:00
static int bond_3ad_xor_xmit(struct sk_buff *skb, struct net_device *dev)
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
{
struct bonding *bond = netdev_priv(dev);
struct slave *slave;
struct bond_up_slave *slaves;
unsigned int count;
slaves = rcu_dereference(bond->slave_arr);
count = slaves ? ACCESS_ONCE(slaves->count) : 0;
if (likely(count)) {
slave = slaves->arr[bond_xmit_hash(bond, skb) % count];
bond_dev_queue_xmit(bond, skb, slave->dev);
} else {
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(dev, skb);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
}
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
net: convert remaining non-symbolic return values in ndo_start_xmit() functions This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 10:23:38 +08:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
/* in broadcast mode, we send everything to all usable interfaces. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
struct slave *slave = NULL;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
if (bond_is_last_slave(bond, slave))
break;
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
if (!skb2) {
bonding: ratelimit pr_err() for bond xmit broadcast It may spam if the system is out of the memory, add ratelimit for it. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:00:10 +08:00
net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
bond_dev->name, __func__);
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
bond_dev_queue_xmit(bond, skb2, slave->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: convert IS_UP(slave->dev) to inline function Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:57 +08:00
if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)
bonding: simplify broadcast_xmit function We don't need to start from the curr_active_slave as the frame will be sent to all eligible slaves anyway, so we remove the unnecessary local variables, checks and comments, and make it use the standard list API. This has the nice side-effect that later when it's converted to RCU a race condition will be avoided which could lead to double packet tx. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:49 +08:00
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(bond_dev, skb);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
net: convert remaining non-symbolic return values in ndo_start_xmit() functions This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 10:23:38 +08:00
return NETDEV_TX_OK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*------------------------- Device initialization ---------------------------*/
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Lookup the slave that corresponds to a qid */
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
static inline int bond_slave_override(struct bonding *bond,
struct sk_buff *skb)
{
struct slave *slave = NULL;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
if (!skb->queue_mapping)
return 1;
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
/* Find out if any slaves have the same mapping as this skb. */
bonding: slight optimizztion for bond_slave_override() When the skb is xmit by the function bond_slave_override(), it will have duplicate judgement for slave state, and I think it will consumes a little performance, maybe it is negligible, so I simplify the function and remove the unwanted judgement. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02 09:13:06 +08:00
bond_for_each_slave_rcu(bond, slave, iter) {
if (slave->queue_id == skb->queue_mapping) {
bonding: Bonding Overriding Configuration logic restored. Before commit 3900f29021f0bc7fe9815aa32f1a993b7dfdd402 ("bonding: slight optimizztion for bond_slave_override()") the override logic was to send packets with non-zero queue_id through the slave with corresponding queue_id, under two conditions only - if the slave can transmit and it's up. The above mentioned commit changed this logic by introducing an additional condition - whether the bond is active (indirectly, using the slave_can_tx and later - bond_is_active_slave), that prevents the user from implementing more complex policies according to the Documentation/networking/bonding.txt. Signed-off-by: Anton Nayshtut <anton@swortex.com> Signed-off-by: Alexey Bogoslavsky <alexey@swortex.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29 19:20:25 +08:00
if (bond_slave_is_up(slave) &&
slave->link == BOND_LINK_UP) {
bonding: slight optimizztion for bond_slave_override() When the skb is xmit by the function bond_slave_override(), it will have duplicate judgement for slave state, and I think it will consumes a little performance, maybe it is negligible, so I simplify the function and remove the unwanted judgement. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02 09:13:06 +08:00
bond_dev_queue_xmit(bond, skb, slave->dev);
return 0;
}
/* If the slave isn't UP, use default transmit policy. */
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
break;
}
}
bonding: slight optimizztion for bond_slave_override() When the skb is xmit by the function bond_slave_override(), it will have duplicate judgement for slave state, and I think it will consumes a little performance, maybe it is negligible, so I simplify the function and remove the unwanted judgement. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02 09:13:06 +08:00
return 1;
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
}
bonding: reset queue mapping prior to transmission to physical device (v5) The bonding driver is multiqueue enabled, in which each queue represents a slave to enable optional steering of output frames to given slaves against the default output policy. However, it needs to reset the skb->queue_mapping prior to queuing to the physical device or the physical slave (if it is multiqueue) could wind up transmitting on an unintended tx queue Change Notes: v2) Based on first pass review, updated the patch to restore the origional queue mapping that was found in bond_select_queue, rather than simply resetting to zero. This preserves the value of queue_mapping when it was set on receive in the forwarding case which is desireable. v3) Fixed spelling an casting error in skb->cb v4) fixed to store raw queue_mapping to avoid double decrement v5) Eric D requested that ->cb access be wrapped in a macro. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-03 18:35:52 +08:00
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 16:18:26 +08:00
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb,
netdevice: add queue selection fallback handler for ndo_select_queue Add a new argument for ndo_select_queue() callback that passes a fallback handler. This gets invoked through netdev_pick_tx(); fallback handler is currently __netdev_pick_tx() as most drivers invoke this function within their customized implementation in case for skbs that don't need any special handling. This fallback handler can then be replaced on other call-sites with different queue selection methods (e.g. in packet sockets, pktgen etc). This also has the nice side-effect that __netdev_pick_tx() is then only invoked from netdev_pick_tx() and export of that function to modules can be undone. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 22:55:20 +08:00
void *accel_priv, select_queue_fallback_t fallback)
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
{
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* This helper function exists to help dev_pick_tx get the correct
bonding: Incorrect TX queue offset When packets come in from a device with >= 16 receive queues headed out a bonding interface, syslog gets filled with this: kernel: bond0 selects TX queue 16, but real number of TX queues is 16 because queue_mapping is offset by 1. Adjust return value to account for the offset. This is a revision of my earlier patch (which did not use the skb_rx_queue_* helpers - thanks to Ben for the suggestion). Andy submitted a similar patch which emits a pr_warning on invalid queue selection, but I believe the log spew is not useful. We can revisit that question in the future, but in the interim I believe fixing the core problem is worthwhile. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 14:22:04 +08:00
* destination queue. Using a helper function skips a call to
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
* skb_tx_hash and will put the skbs in the queue we expect on their
* way down to the bonding driver.
*/
bonding: Incorrect TX queue offset When packets come in from a device with >= 16 receive queues headed out a bonding interface, syslog gets filled with this: kernel: bond0 selects TX queue 16, but real number of TX queues is 16 because queue_mapping is offset by 1. Adjust return value to account for the offset. This is a revision of my earlier patch (which did not use the skb_rx_queue_* helpers - thanks to Ben for the suggestion). Andy submitted a similar patch which emits a pr_warning on invalid queue selection, but I believe the log spew is not useful. We can revisit that question in the future, but in the interim I believe fixing the core problem is worthwhile. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 14:22:04 +08:00
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Save the original txq to restore before passing to the driver */
net: rename bond_queue_mapping to slave_dev_queue_mapping As this is going to be used not only by bonding. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 10:28:49 +08:00
qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
bonding: reset queue mapping prior to transmission to physical device (v5) The bonding driver is multiqueue enabled, in which each queue represents a slave to enable optional steering of output frames to given slaves against the default output policy. However, it needs to reset the skb->queue_mapping prior to queuing to the physical device or the physical slave (if it is multiqueue) could wind up transmitting on an unintended tx queue Change Notes: v2) Based on first pass review, updated the patch to restore the origional queue mapping that was found in bond_select_queue, rather than simply resetting to zero. This preserves the value of queue_mapping when it was set on receive in the forwarding case which is desireable. v3) Fixed spelling an casting error in skb->cb v4) fixed to store raw queue_mapping to avoid double decrement v5) Eric D requested that ->cb access be wrapped in a macro. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-03 18:35:52 +08:00
bonding: Incorrect TX queue offset When packets come in from a device with >= 16 receive queues headed out a bonding interface, syslog gets filled with this: kernel: bond0 selects TX queue 16, but real number of TX queues is 16 because queue_mapping is offset by 1. Adjust return value to account for the offset. This is a revision of my earlier patch (which did not use the skb_rx_queue_* helpers - thanks to Ben for the suggestion). Andy submitted a similar patch which emits a pr_warning on invalid queue selection, but I believe the log spew is not useful. We can revisit that question in the future, but in the interim I believe fixing the core problem is worthwhile. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 14:22:04 +08:00
if (unlikely(txq >= dev->real_num_tx_queues)) {
net-bonding: Fix minor sparse complaints This gets rid of minor sparse complaints: drivers/net/bonding/bond_main.c:4361:4: warning: do-while statement is not a compound statement drivers/net/bonding/bond_main.c:243:12: warning: symbol 'bond_mode_name' was not declared. Should it be static? Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 23:22:29 +08:00
do {
bonding: Incorrect TX queue offset When packets come in from a device with >= 16 receive queues headed out a bonding interface, syslog gets filled with this: kernel: bond0 selects TX queue 16, but real number of TX queues is 16 because queue_mapping is offset by 1. Adjust return value to account for the offset. This is a revision of my earlier patch (which did not use the skb_rx_queue_* helpers - thanks to Ben for the suggestion). Andy submitted a similar patch which emits a pr_warning on invalid queue selection, but I believe the log spew is not useful. We can revisit that question in the future, but in the interim I believe fixing the core problem is worthwhile. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 14:22:04 +08:00
txq -= dev->real_num_tx_queues;
net-bonding: Fix minor sparse complaints This gets rid of minor sparse complaints: drivers/net/bonding/bond_main.c:4361:4: warning: do-while statement is not a compound statement drivers/net/bonding/bond_main.c:243:12: warning: symbol 'bond_mode_name' was not declared. Should it be static? Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 23:22:29 +08:00
} while (txq >= dev->real_num_tx_queues);
bonding: Incorrect TX queue offset When packets come in from a device with >= 16 receive queues headed out a bonding interface, syslog gets filled with this: kernel: bond0 selects TX queue 16, but real number of TX queues is 16 because queue_mapping is offset by 1. Adjust return value to account for the offset. This is a revision of my earlier patch (which did not use the skb_rx_queue_* helpers - thanks to Ben for the suggestion). Andy submitted a similar patch which emits a pr_warning on invalid queue selection, but I believe the log spew is not useful. We can revisit that question in the future, but in the interim I believe fixing the core problem is worthwhile. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 14:22:04 +08:00
}
return txq;
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
}
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
{
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
struct bonding *bond = netdev_priv(dev);
bonding: make TX_QUEUE_OVERRIDE() macro an inline function Also, make it accept bonding as a parameter and change the name a bit to better reflect its scope. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:52 +08:00
if (bond_should_override_tx_queue(bond) &&
!bond_slave_override(bond, skb))
return NETDEV_TX_OK;
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
bonding: create a macro for bond mode and use it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:55 +08:00
switch (BOND_MODE(bond)) {
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
case BOND_MODE_ROUNDROBIN:
return bond_xmit_roundrobin(skb, dev);
case BOND_MODE_ACTIVEBACKUP:
return bond_xmit_activebackup(skb, dev);
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
case BOND_MODE_8023AD:
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
case BOND_MODE_XOR:
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
return bond_3ad_xor_xmit(skb, dev);
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
case BOND_MODE_BROADCAST:
return bond_xmit_broadcast(skb, dev);
case BOND_MODE_ALB:
return bond_alb_xmit(skb, dev);
bonding: Added bond_tlb_xmit() for tlb mode. Re-organized the xmit function for the lb mode separating tlb xmit from the alb mode. This will enable use of the hashing policies like 802.3ad mode. Also extended use of xmit-hash-policy to tlb mode. Now the tlb-mode defaults to BOND_XMIT_POLICY_LAYER2 if the xmit policy module parameter is not set (just like 802.3ad, or Xor mode). Change-Id: I140257403d272df75f477b380207338d0f04963e Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:20 +08:00
case BOND_MODE_TLB:
return bond_tlb_xmit(skb, dev);
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
default:
/* Should never happen, mode already checked */
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_err(dev, "Unknown bonding mode %d\n", BOND_MODE(bond));
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
WARN_ON_ONCE(1);
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(dev, skb);
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
return NETDEV_TX_OK;
}
}
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
netdev_tx_t ret = NETDEV_TX_OK;
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* If we risk deadlock from transmitting this in the
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
* netpoll path, tell netpoll to queue the frame for later tx
*/
bonding: slight optimization for bond xmit path Add unlikely() micro to the unlikely conditions in the bond xmit path for slight optimization. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 17:00:09 +08:00
if (unlikely(is_netpoll_tx_blocked(dev)))
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
return NETDEV_TX_BUSY;
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
rcu_read_lock();
bonding: add bond_has_slaves() and use it Currently we verify if we have slaves by checking if bond->slave_list is empty. Create a define bond_has_slaves() and use it, a bit more readable and easier to change in the future. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:21 +08:00
if (bond_has_slaves(bond))
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
ret = __bond_start_xmit(skb, dev);
else
bonding: add bond_tx_drop() helper Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 02:47:54 +08:00
bond_tx_drop(dev, skb);
bonding: initial RCU conversion This patch does the initial bonding conversion to RCU. After it the following modes are protected by RCU alone: roundrobin, active-backup, broadcast and xor. Modes ALB/TLB and 3ad still acquire bond->lock for reading, and will be dealt with later. curr_active_slave needs to be dereferenced via rcu in the converted modes because the only thing protecting the slave after this patch is rcu_read_lock, so we need the proper barrier for weakly ordered archs and to make sure we don't have stale pointer. It's not tagged with __rcu yet because there's still work to be done to remove the curr_slave_lock, so sparse will complain when rcu_assign_pointer and rcu_dereference are used, but the alternative to use rcu_dereference_protected would've created much bigger code churn which is more difficult to test and review. That will be converted in time. 1. Active-backup mode 1.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.55% in bonding, system spent 0.29% CPU in bonding - new bonding: iperf spent 0.29% in bonding, system spent 0.15% CPU in bonding 1.2. Bandwidth measurements - old bonding: 16.1 gbps consistently - new bonding: 17.5 gbps consistently 2. Round-robin mode 2.1 Perf recording while doing iperf -P 4 - old bonding: iperf spent 0.51% in bonding, system spent 0.24% CPU in bonding - new bonding: iperf spent 0.16% in bonding, system spent 0.11% CPU in bonding 2.2 Bandwidth measurements - old bonding: 8 gbps (variable due to packet reorderings) - new bonding: 10 gbps (variable due to packet reorderings) Of course the latency has improved in all converted modes, and moreover while doing enslave/release (since it doesn't affect tx anymore). Also I've stress tested all modes doing enslave/release in a loop while transmitting traffic. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:51 +08:00
rcu_read_unlock();
net: bonding: factor out rlock(bond->lock) in xmit path Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 09:48:02 +08:00
return ret;
}
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
bond: add support to read speed and duplex via ethtool This patch adds support for the get_settings ethtool op to the bonding driver. This was motivated by users who wanted to get the speed of the bond and compare that against throughput to understand utilization. The behavior before this patch was added was problematic when computing line utilization after trying to get link-speed and throughput via SNMP. Output from ethtool looks like this for a round-robin bond: Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 11000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Link detected: yes I tested this and verified it works as expected. A test was also done on a version backported to an older kernel and it worked well there. v2: Switch to using ethtool_cmd_speed_set to set speed, added check to SLAVE_IS_OK for each slave in bond, dropped mode-specific calculations as they were not needed, and set port type to 'Other.' v3: Fix useless assignment and checkpatch warning. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 22:46:00 +08:00
static int bond_ethtool_get_settings(struct net_device *bond_dev,
struct ethtool_cmd *ecmd)
{
struct bonding *bond = netdev_priv(bond_dev);
unsigned long speed = 0;
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
struct list_head *iter;
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
struct slave *slave;
bond: add support to read speed and duplex via ethtool This patch adds support for the get_settings ethtool op to the bonding driver. This was motivated by users who wanted to get the speed of the bond and compare that against throughput to understand utilization. The behavior before this patch was added was problematic when computing line utilization after trying to get link-speed and throughput via SNMP. Output from ethtool looks like this for a round-robin bond: Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 11000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Link detected: yes I tested this and verified it works as expected. A test was also done on a version backported to an older kernel and it worked well there. v2: Switch to using ethtool_cmd_speed_set to set speed, added check to SLAVE_IS_OK for each slave in bond, dropped mode-specific calculations as they were not needed, and set port type to 'Other.' v3: Fix useless assignment and checkpatch warning. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 22:46:00 +08:00
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->port = PORT_OTHER;
bonding: replace SLAVE_IS_OK() with bond_slave_can_tx() They're verifying the same thing (except of IFF_UP, which is implied for netif_running(), which is also a prerequisite). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:59 +08:00
/* Since bond_slave_can_tx returns false for all inactive or down slaves, we
bond: add support to read speed and duplex via ethtool This patch adds support for the get_settings ethtool op to the bonding driver. This was motivated by users who wanted to get the speed of the bond and compare that against throughput to understand utilization. The behavior before this patch was added was problematic when computing line utilization after trying to get link-speed and throughput via SNMP. Output from ethtool looks like this for a round-robin bond: Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 11000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Link detected: yes I tested this and verified it works as expected. A test was also done on a version backported to an older kernel and it worked well there. v2: Switch to using ethtool_cmd_speed_set to set speed, added check to SLAVE_IS_OK for each slave in bond, dropped mode-specific calculations as they were not needed, and set port type to 'Other.' v3: Fix useless assignment and checkpatch warning. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 22:46:00 +08:00
* do not need to check mode. Though link speed might not represent
* the true receive or transmit bandwidth (not all modes are symmetric)
* this is an accurate maximum.
*/
bonding: make bond_for_each_slave() use lower neighbour's private It needs a list_head *iter, so add it wherever needed. Use both non-rcu and rcu variants. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:14 +08:00
bond_for_each_slave(bond, slave, iter) {
bonding: replace SLAVE_IS_OK() with bond_slave_can_tx() They're verifying the same thing (except of IFF_UP, which is implied for netif_running(), which is also a prerequisite). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:59 +08:00
if (bond_slave_can_tx(slave)) {
bond: add support to read speed and duplex via ethtool This patch adds support for the get_settings ethtool op to the bonding driver. This was motivated by users who wanted to get the speed of the bond and compare that against throughput to understand utilization. The behavior before this patch was added was problematic when computing line utilization after trying to get link-speed and throughput via SNMP. Output from ethtool looks like this for a round-robin bond: Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 11000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Link detected: yes I tested this and verified it works as expected. A test was also done on a version backported to an older kernel and it worked well there. v2: Switch to using ethtool_cmd_speed_set to set speed, added check to SLAVE_IS_OK for each slave in bond, dropped mode-specific calculations as they were not needed, and set port type to 'Other.' v3: Fix useless assignment and checkpatch warning. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 22:46:00 +08:00
if (slave->speed != SPEED_UNKNOWN)
speed += slave->speed;
if (ecmd->duplex == DUPLEX_UNKNOWN &&
slave->duplex != DUPLEX_UNKNOWN)
ecmd->duplex = slave->duplex;
}
}
ethtool_cmd_speed_set(ecmd, speed ? : SPEED_UNKNOWN);
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
bond: add support to read speed and duplex via ethtool This patch adds support for the get_settings ethtool op to the bonding driver. This was motivated by users who wanted to get the speed of the bond and compare that against throughput to understand utilization. The behavior before this patch was added was problematic when computing line utilization after trying to get link-speed and throughput via SNMP. Output from ethtool looks like this for a round-robin bond: Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 11000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Link detected: yes I tested this and verified it works as expected. A test was also done on a version backported to an older kernel and it worked well there. v2: Switch to using ethtool_cmd_speed_set to set speed, added check to SLAVE_IS_OK for each slave in bond, dropped mode-specific calculations as they were not needed, and set port type to 'Other.' v3: Fix useless assignment and checkpatch warning. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 22:46:00 +08:00
return 0;
}
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
ethtool: fix drvinfo strings set in drivers Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06 08:44:26 +08:00
struct ethtool_drvinfo *drvinfo)
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
{
ethtool: fix drvinfo strings set in drivers Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06 08:44:26 +08:00
strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d",
BOND_ABI_VERSION);
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
}
drivers/net: const-ify ethtool_ops declarations Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 02:30:00 +08:00
static const struct ethtool_ops bond_ethtool_ops = {
[PATCH] fix bonding crash, remove old ABI support David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 07:11:50 +08:00
.get_drvinfo = bond_ethtool_get_drvinfo,
bond: add support to read speed and duplex via ethtool This patch adds support for the get_settings ethtool op to the bonding driver. This was motivated by users who wanted to get the speed of the bond and compare that against throughput to understand utilization. The behavior before this patch was added was problematic when computing line utilization after trying to get link-speed and throughput via SNMP. Output from ethtool looks like this for a round-robin bond: Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 11000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Link detected: yes I tested this and verified it works as expected. A test was also done on a version backported to an older kernel and it worked well there. v2: Switch to using ethtool_cmd_speed_set to set speed, added check to SLAVE_IS_OK for each slave in bond, dropped mode-specific calculations as they were not needed, and set port type to 'Other.' v3: Fix useless assignment and checkpatch warning. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 22:46:00 +08:00
.get_settings = bond_ethtool_get_settings,
bonding: add more ethtool support This patch allows reporting the link, checksum, and feature settings of bonded device by using generic hooks. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-14 09:17:09 +08:00
.get_link = ethtool_op_get_link,
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
};
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
static const struct net_device_ops bond_netdev_ops = {
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
.ndo_init = bond_init,
bonding: fix destructor It is not safe to use a network device destructor that is a function in the module, since it can be called after module is unloaded if sysfs handle is open. When eventually using netlink, the device cleanup code needs to be done via uninit function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:47 +08:00
.ndo_uninit = bond_uninit,
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
.ndo_open = bond_open,
.ndo_stop = bond_close,
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
.ndo_start_xmit = bond_start_xmit,
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
.ndo_select_queue = bond_select_queue,
net: Enable 64-bit net device statistics on 32-bit architectures Use struct rtnl_link_stats64 as the statistics structure. On 32-bit architectures, insert 32 bits of padding after/before each field of struct net_device_stats to make its layout compatible with struct rtnl_link_stats64. Add an anonymous union in net_device; move stats into the union and add struct rtnl_link_stats64 stats64. Add net_device_ops::ndo_get_stats64, implementations of which will return a pointer to struct rtnl_link_stats64. Drivers that implement this operation must not update the structure asynchronously. Change dev_get_stats() to call ndo_get_stats64 if available, and to return a pointer to struct rtnl_link_stats64. Change callers of dev_get_stats() accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-08 15:19:54 +08:00
.ndo_get_stats64 = bond_get_stats,
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
.ndo_do_ioctl = bond_do_ioctl,
bonding: use ndo_change_rx_flags callback Benefit from use of ndo_change_rx_flags in handling change of promisc and allmulti. No need to store previous state locally. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-16 11:15:04 +08:00
.ndo_change_rx_flags = bond_change_rx_flags,
bonding: Convert hw addr handling to sync/unsync, support ucast addresses This patch converts bonding to use the dev_uc/mc_sync and dev_uc/mc_sync_multiple functions for updating the hardware addresses of bonding slaves. The existing functions to add or remove addresses are removed, and their functionality is replaced with calls to dev_mc_sync or dev_mc_sync_multiple, depending upon the bonding mode. Calls to dev_uc_sync and dev_uc_sync_multiple are also added, so that unicast addresses added to a bond will be properly synced with its slaves. Various functions are renamed to better reflect the new situation, and relevant comments are updated. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 19:57:30 +08:00
.ndo_set_rx_mode = bond_set_rx_mode,
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
.ndo_change_mtu = bond_change_mtu,
bonding: do vlan cleanup Now when all devices are cleaned up, bond can be cleaned up as well - remove bond->vlgrp - remove bond_vlan_rx_register - substitute necessary occurences of vlan_group_get_device Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 12:54:46 +08:00
.ndo_set_mac_address = bond_set_mac_address,
netdev: add more functions to netdevice ops This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 12:14:53 +08:00
.ndo_neigh_setup = bond_neigh_setup,
bonding: do vlan cleanup Now when all devices are cleaned up, bond can be cleaned up as well - remove bond->vlgrp - remove bond_vlan_rx_register - substitute necessary occurences of vlan_group_get_device Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 12:54:46 +08:00
.ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
bonding: sync netpoll code with bridge V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-18 07:43:32 +08:00
.ndo_netpoll_setup = bond_netpoll_setup,
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
.ndo_netpoll_cleanup = bond_netpoll_cleanup,
.ndo_poll_controller = bond_poll_controller,
#endif
bond: implement [add/del]_slave ops allow enslaving/releasing using netlink interface Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 17:33:01 +08:00
.ndo_add_slave = bond_enslave,
.ndo_del_slave = bond_release,
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
.ndo_fix_features = bond_fix_features,
switchdev: cut over to new switchdev_port_bridge_setlink Rocker, bonding, and team can now use the switchdev bridge setlink to parse raw netlink; no need to duplicate this code in each driver. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:47:57 +08:00
.ndo_bridge_setlink = switchdev_port_bridge_setlink,
switchdev: cut over to new switchdev_port_bridge_getlink Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:05 +08:00
.ndo_bridge_getlink = switchdev_port_bridge_getlink,
switchdev: cut over to new switchdev_port_bridge_dellink Rocker, bonding and team and switch over to the new switchdev_port_bridge_dellink to avoid duplicating code in each driver. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 00:48:01 +08:00
.ndo_bridge_dellink = switchdev_port_bridge_dellink,
switchdev: add support for fdb add/del/dump via switchdev_port_obj ops. - introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:55:43 +08:00
.ndo_fdb_add = switchdev_port_fdb_add,
.ndo_fdb_del = switchdev_port_fdb_del,
.ndo_fdb_dump = switchdev_port_fdb_dump,
bonding: Don't segment multiple tagged packets on bonding device Bonding devices don't need to segment multiple tagged packets since their slaves can segment them. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-27 13:31:14 +08:00
.ndo_features_check = passthru_features_check,
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
};
bonding: set sysfs device_type to 'bond' Sets the sysfs device_type to 'bond' for udev. This allows udev rules to be created for bond devices. This is similar to how other network devices set their device_type. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:59:23 +08:00
static const struct device_type bond_type = {
.name = "bond",
};
bonding: fix potential deadlock in bond_uninit() bond_uninit() is invoked with rtnl_lock held, when it does destroy_workqueue() which will potentially flush all works in this workqueue, if we hold rtnl_lock again in the work function, it will deadlock. So move destroy_workqueue() to destructor where rtnl_lock is not held any more, suggested by Eric. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 05:30:52 +08:00
static void bond_destructor(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
if (bond->wq)
destroy_workqueue(bond->wq);
free_netdev(bond_dev);
}
bonding: push Netlink bits into separate file Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 23:43:33 +08:00
void bond_setup(struct net_device *bond_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: convert curr_slave_lock to a spinlock and rename it curr_slave_lock is now a misleading name, a much better name is mode_lock as it'll be used for each mode's purposes and it's no longer necessary to use a rwlock, a simple spinlock is enough. Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12 04:49:25 +08:00
spin_lock_init(&bond->mode_lock);
bonding: bond_create always called with default parameters bond_create() is always called with same parameters so move the argument down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:44 +08:00
bond->params = bonding_defaults;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Initialize pointers */
bond->dev = bond_dev;
/* Initialize the device entry points */
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
ether_setup(bond_dev);
bonding: convert to net_device_ops Convert to net_device_ops table. Note: for some operations move error checking into generic networking layer (rather than looking at pointers in bonding). A couple of gratituous style cleanups to get rid of extra {} Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 13:56:05 +08:00
bond_dev->netdev_ops = &bond_netdev_ops;
[PATCH] bonding: inherit zero-copy flags of slaves This change allows a bonding device to inherit the "zero-copy" features of its slave devices. It was inspired by a couple of previous postings on this topic: http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2 http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2 and it's largely a combination of the patches that appear in those emails. Signed-off-by: Arthur Kepner <akepner@sgi.com>
2005-08-23 13:34:53 +08:00
bond_dev->ethtool_ops = &bond_ethtool_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: fix potential deadlock in bond_uninit() bond_uninit() is invoked with rtnl_lock held, when it does destroy_workqueue() which will potentially flush all works in this workqueue, if we hold rtnl_lock again in the work function, it will deadlock. So move destroy_workqueue() to destructor where rtnl_lock is not held any more, suggested by Eric. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 05:30:52 +08:00
bond_dev->destructor = bond_destructor;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: set sysfs device_type to 'bond' Sets the sysfs device_type to 'bond' for udev. This allows udev rules to be created for bond devices. This is similar to how other network devices set their device_type. Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 22:59:23 +08:00
SET_NETDEV_DEVTYPE(bond_dev, &bond_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Initialize the device options */
bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
net: bonding: convert to using IFF_NO_QUEUE Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 16:30:39 +08:00
bond_dev->priv_flags |= IFF_BONDING | IFF_UNICAST_FLT | IFF_NO_QUEUE;
net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 14:05:38 +08:00
bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* don't acquire bond device's netif_tx_lock when transmitting */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bond_dev->features |= NETIF_F_LLTX;
/* By default, we declare the bond to be fully
* VLAN hardware accelerated capable. Special
* care is taken in the various xmit functions
* when there are slaves that are not hw accel
* capable
*/
bonding: Don't allow bond devices to change network namespaces. Like bridge, bonding as netdevice doesn't cross netns boundaries. Bonding ports and bonding itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 17:16:30 +08:00
/* Don't allow bond devices to change network namespaces. */
bond_dev->features |= NETIF_F_NETNS_LOCAL;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bond_dev->hw_features = BOND_VLAN_FEATURES |
net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_* Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 10:04:27 +08:00
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_FILTER;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bonding: handle more gso types In commit 5a7baa78851b ("bonding: Advertize vxlan offload features when supported"), Or Gerlitz added support conditional vxlan offload. In this patch I also add support for all kind of tunnels, but we allow a bonding device to not require segmentation, as it is always better to make this segmentation at the very last stage, if a particular slave device requires it. Tested: Setup a GRE tunnel, on a physical NIC not having tx-gre-segmentation. Results on bnx2x are even better, as we no longer have to segment in software. ethtool -K bond0 tx-gre-segmentation off super_netperf 50 --google-pacing-rate 30000000 -H 10.7.8.152 -l 15 7538.32 ethtool -K bond0 tx-gre-segmentation on super_netperf 50 --google-pacing-rate 30000000 -H 10.7.8.152 -l 15 10200.5 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 15:27:14 +08:00
bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
bonding: convert to ndo_fix_features This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 11:22:17 +08:00
bond_dev->features |= bond_dev->hw_features;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Destroy a bonding device.
* Must be under rtnl_lock when this function is called.
*/
bond: Simplify bond device destruction Manually inline the code from bond_deinit to bond_uninit. bond_uninit is the only caller and it is short. Move the call of bond_release_all from the netdev notifier into bond_uninit. The call site is effectively the same and performing the call explicitly allows all the paths for destroying a bonding device to behave the same way. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:24 +08:00
static void bond_uninit(struct net_device *bond_dev)
bonding: Clean up resource leaks This patch reworks the resource free logic performed at the time a bonding device is released. This (a) closes two resource leaks, one for workqueues and one for multicast lists, and (b) improves commonality of code between the "destroy one" and "destroy all" paths by performing final free activity via destructor instead of explicitly (and differently) in each path. "Sean E. Millichamp" <sean@bruenor.org> reported the workqueue leak, and included a different patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 08:41:15 +08:00
{
netdevice: safe convert to netdev_priv() #part-1 We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 15:37:49 +08:00
struct bonding *bond = netdev_priv(bond_dev);
bonding: use bond_for_each_slave() in bond_uninit() We're safe agains removal there, cause we use neighbours primitives. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:15 +08:00
struct list_head *iter;
struct slave *slave;
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
struct bond_up_slave *arr;
bonding: Clean up resource leaks This patch reworks the resource free logic performed at the time a bonding device is released. This (a) closes two resource leaks, one for workqueues and one for multicast lists, and (b) improves commonality of code between the "destroy one" and "destroy all" paths by performing final free activity via destructor instead of explicitly (and differently) in each path. "Sean E. Millichamp" <sean@bruenor.org> reported the workqueue leak, and included a different patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 08:41:15 +08:00
bonding: make bonding support netpoll Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 15:48:51 +08:00
bond_netpoll_cleanup(bond_dev);
bond: Simplify bond device destruction Manually inline the code from bond_deinit to bond_uninit. bond_uninit is the only caller and it is short. Move the call of bond_release_all from the netdev notifier into bond_uninit. The call site is effectively the same and performing the call explicitly allows all the paths for destroying a bonding device to behave the same way. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:24 +08:00
/* Release the bonded slaves */
bonding: use bond_for_each_slave() in bond_uninit() We're safe agains removal there, cause we use neighbours primitives. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 15:20:15 +08:00
bond_for_each_slave(bond, slave, iter)
bonding: convert to list API and replace bond's custom list This patch aims to remove struct bonding's first_slave and struct slave's next and prev pointers, and replace them with the standard Linux list API. The old macros are converted to list API as well and some new primitives are available now. The checks if there're slaves that used slave_cnt have been replaced by the list_empty macro. Also a few small style fixes, changing longest -> shortest line in local variable declarations, leaving an empty line before return and removing unnecessary brackets. This is the first step to gradual RCU conversion. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 22:54:47 +08:00
__bond_release_one(bond_dev, slave->dev, true);
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_info(bond_dev, "Released all slaves\n");
bond: Simplify bond device destruction Manually inline the code from bond_deinit to bond_uninit. bond_uninit is the only caller and it is short. Move the call of bond_release_all from the netdev notifier into bond_uninit. The call site is effectively the same and performing the call explicitly allows all the paths for destroying a bonding device to behave the same way. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:24 +08:00
bonding: Simplify the xmit function for modes that use xmit_hash Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 08:45:01 +08:00
arr = rtnl_dereference(bond->slave_arr);
if (arr) {
RCU_INIT_POINTER(bond->slave_arr, NULL);
kfree_rcu(arr, rcu);
}
bonding: Clean up resource leaks This patch reworks the resource free logic performed at the time a bonding device is released. This (a) closes two resource leaks, one for workqueues and one for multicast lists, and (b) improves commonality of code between the "destroy one" and "destroy all" paths by performing final free activity via destructor instead of explicitly (and differently) in each path. "Sean E. Millichamp" <sean@bruenor.org> reported the workqueue leak, and included a different patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 08:41:15 +08:00
list_del(&bond->bond_list);
bonding: add the debugfs facility to the bonding driver This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 23:17:13 +08:00
bond_debug_unregister(bond);
bonding: Clean up resource leaks This patch reworks the resource free logic performed at the time a bonding device is released. This (a) closes two resource leaks, one for workqueues and one for multicast lists, and (b) improves commonality of code between the "destroy one" and "destroy all" paths by performing final free activity via destructor instead of explicitly (and differently) in each path. "Sean E. Millichamp" <sean@bruenor.org> reported the workqueue leak, and included a different patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 08:41:15 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*------------------------- Module initialization ---------------------------*/
static int bond_check_params(struct bond_params *params)
{
bonding: arp_ip_count and arp_targets can be wrong When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-18 09:18:30 +08:00
int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
bonding: options handling cleanup Make local functions static (ie. only used in bond_options.c) Make bond options parsing tables constant. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05 08:36:44 +08:00
struct bond_opt_value newval;
const struct bond_opt_value *valptr;
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
int arp_all_targets_value;
bonding: Allow userspace to set actors' system_priority in AD system This patch allows user to randomize the system-priority in an ad-system. The allowed range is 1 - 0xFFFF while default value is 0xFFFF. If user does not specify this value, the system defaults to 0xFFFF, which is what it was before this patch. Following example code could set the value - # modprobe bonding mode=4 # sys_prio=$(( 1 + RANDOM + RANDOM )) # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: * fixed up style issues reported by checkpatch * changed how the default value is set in bond_check_params(), this makes the default consistent between what gets set for a new bond and what the default is claimed to be in the bonding options.] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:55 +08:00
u16 ad_actor_sys_prio = 0;
bonding: Implement user key part of port_key in an AD system. The port key has three components - user-key, speed-part, and duplex-part. The LSBit is for the duplex-part, next 5 bits are for the speed while the remaining 10 bits are the user defined key bits. Get these 10 bits from the user-space (through the SysFs interface) and use it to form the admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If it is not provided then use zero for the user-key-bits (default). It can set using following example code - # modprobe bonding mode=4 # usr_port_key=$(( RANDOM & 0x3FF )) # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: * fixed up style issues reported by checkpatch * fixed up context from change in ad_actor_sys_prio patch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:57 +08:00
u16 ad_user_port_key = 0;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Convert string parameters. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mode) {
bonding: convert mode setting to use the new option API This patch makes the bond's mode setting use the new option API and adds support for dependency printing which relies on having an entry for the mode option in the bond_opts[] array. Also add the ability to print the mode name when mode dependency fails and fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:17 +08:00
bond_opt_initstr(&newval, mode);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_MODE), &newval);
if (!valptr) {
pr_err("Error: Invalid bonding mode \"%s\"\n", mode);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
}
bonding: convert mode setting to use the new option API This patch makes the bond's mode setting use the new option API and adds support for dependency printing which relies on having an entry for the mode option in the bond_opts[] array. Also add the ability to print the mode name when mode dependency fails and fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:17 +08:00
bond_mode = valptr->value;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
if (xmit_hash_policy) {
if ((bond_mode != BOND_MODE_XOR) &&
bonding: Added bond_tlb_xmit() for tlb mode. Re-organized the xmit function for the lb mode separating tlb xmit from the alb mode. This will enable use of the hashing policies like 802.3ad mode. Also extended use of xmit-hash-policy to tlb mode. Now the tlb-mode defaults to BOND_XMIT_POLICY_LAYER2 if the xmit policy module parameter is not set (just like 802.3ad, or Xor mode). Change-Id: I140257403d272df75f477b380207338d0f04963e Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:20 +08:00
(bond_mode != BOND_MODE_8023AD) &&
(bond_mode != BOND_MODE_TLB)) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
bonding: Neaten pr_<level> Add missing terminating newlines. Convert uses of pr_info to pr_cont in bond_check_params. Standardize upper/lower case styles. Typo fixes, remove unnecessary parentheses and periods. Alignment neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:01:45 +08:00
bond_mode_name(bond_mode));
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
} else {
bonding: convert xmit_hash_policy to use the new option API This patch adds the necessary changes so xmit_hash_policy would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:19 +08:00
bond_opt_initstr(&newval, xmit_hash_policy);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH),
&newval);
if (!valptr) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
xmit_hash_policy);
return -EINVAL;
}
bonding: convert xmit_hash_policy to use the new option API This patch adds the necessary changes so xmit_hash_policy would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:19 +08:00
xmit_hashtype = valptr->value;
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (lacp_rate) {
if (bond_mode != BOND_MODE_8023AD) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_info("lacp_rate param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
bonding: convert lacp_rate to use the new option API This patch adds the necessary changes so lacp_rate would use the new bonding option API. Also some trivial/style error fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:27 +08:00
bond_opt_initstr(&newval, lacp_rate);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE),
&newval);
if (!valptr) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("Error: Invalid lacp rate \"%s\"\n",
bonding: convert lacp_rate to use the new option API This patch adds the necessary changes so lacp_rate would use the new bonding option API. Also some trivial/style error fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:27 +08:00
lacp_rate);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
}
bonding: convert lacp_rate to use the new option API This patch adds the necessary changes so lacp_rate would use the new bonding option API. Also some trivial/style error fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:27 +08:00
lacp_fast = valptr->value;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: alternate agg selection policies for 802.3ad This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-05 09:51:16 +08:00
if (ad_select) {
bonding: fix ad_select module param check Obvious copy/paste error when I converted the ad_select to the new option API. "lacp_rate" there should be "ad_select" so we can get the proper value. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Fixes: 9e5f5eebe765 ("bonding: convert ad_select to use the new option API") Reported-by: Karim Scheik <karim.scheik@prisma-solutions.at> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-13 15:47:47 +08:00
bond_opt_initstr(&newval, ad_select);
bonding: convert ad_select to use the new option API This patch adds the necessary changes so ad_select would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:29 +08:00
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT),
&newval);
if (!valptr) {
pr_err("Error: Invalid ad_select \"%s\"\n", ad_select);
bonding: alternate agg selection policies for 802.3ad This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-05 09:51:16 +08:00
return -EINVAL;
}
bonding: convert ad_select to use the new option API This patch adds the necessary changes so ad_select would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:29 +08:00
params->ad_select = valptr->value;
if (bond_mode != BOND_MODE_8023AD)
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("ad_select param only affects 802.3ad mode\n");
bonding: alternate agg selection policies for 802.3ad This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-05 09:51:16 +08:00
} else {
params->ad_select = BOND_AD_STABLE;
}
bonding: Fix useless test: int > INT_MAX max_bonds is of type int and cannot be greater than INT_MAX. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 21:18:34 +08:00
if (max_bonds < 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
if (miimon < 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
miimon, INT_MAX);
bonding: convert miimon to use the new option API This patch adds the necessary changes so miimon would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:31 +08:00
miimon = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (updelay < 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
updelay, INT_MAX);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
updelay = 0;
}
if (downdelay < 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
downdelay, INT_MAX);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
downdelay = 0;
}
if ((use_carrier != 0) && (use_carrier != 1)) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
use_carrier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
use_carrier = 1;
}
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
if (num_peer_notif < 0 || num_peer_notif > 255) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
num_peer_notif);
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
num_peer_notif = 1;
}
bonding: ust micro BOND_NO_USE_ARP to simplify the mode check The bond 3ad and TLB/ALB has the same check path, so combine them. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21 14:40:17 +08:00
/* reset values for 802.3ad/TLB/ALB */
bonding: make BOND_NO_USES_ARP an inline function Also, change its name to better reflect its scope, and skip the "no" part. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:53 +08:00
if (!bond_mode_uses_arp(bond_mode)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!miimon) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
pr_warn("Forcing miimon to 100msec\n");
bonding: disable arp and enable mii monitoring when bond change to no uses arp mode Because the ARP monitoring is not support for 802.3ad, but I still could change the mode to 802.3ad from ab mode while ARP monitoring is running, it is incorrect. So add a check for 802.3ad in bonding_store_mode to fix the problem, and make a new macro BOND_NO_USES_ARP() to simplify the code. v2: according to the Dan Williams's suggestion, bond mode is the most important bond option, it should override any of the other sub-options. So when the mode is changed, the conficting values should be cleared or reset, otherwise the user has to duplicate more operations to modify the logic. I disable the arp and enable mii monitoring when the bond mode is changed to AB, TB and 8023AD if the arp interval is true. v3: according to the Nik's suggestion, the default value of miimon should need a name, there is several place to use it, and the bond_store_arp_interval() could use micro BOND_NO_USES_ARP to make the code more simpify. Suggested-by: Dan Williams <dcbw@redhat.com> Suggested-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-22 22:28:43 +08:00
miimon = BOND_DEFAULT_MIIMON;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
if (tx_queues < 1 || tx_queues > 255) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
tx_queues, BOND_DEFAULT_TX_QUEUES);
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
tx_queues = BOND_DEFAULT_TX_QUEUES;
}
bonding: add all_slaves_active parameter v2: changed parameter name from 'keep_all' to 'all_slaves_active' and skipped setting slaves to inactive rather than creating a new flag at Jay's suggestion. In an effort to suppress duplicate frames on certain bonding modes (specifically the modes that do not require additional configuration on the switch or switches connected to the host), code was added in the generic receive patch in 2.6.16. The current behavior works quite well for most users, but there are some times it would be nice to restore old functionality and allow all frames to make their way up the stack. This patch adds support for a new module option and sysfs file called 'all_slaves_active' that will restore pre-2.6.16 functionality if the user desires. The default value is '0' and retains existing behavior, but the user can set it to '1' and allow all frames up if desired. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:39:21 +08:00
if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
all_slaves_active);
bonding: add all_slaves_active parameter v2: changed parameter name from 'keep_all' to 'all_slaves_active' and skipped setting slaves to inactive rather than creating a new flag at Jay's suggestion. In an effort to suppress duplicate frames on certain bonding modes (specifically the modes that do not require additional configuration on the switch or switches connected to the host), code was added in the generic receive patch in 2.6.16. The current behavior works quite well for most users, but there are some times it would be nice to restore old functionality and allow all frames to make their way up the stack. This patch adds support for a new module option and sysfs file called 'all_slaves_active' that will restore pre-2.6.16 functionality if the user desires. The default value is '0' and retains existing behavior, but the user can set it to '1' and allow all frames up if desired. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:39:21 +08:00
all_slaves_active = 0;
}
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
if (resend_igmp < 0 || resend_igmp > 255) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
resend_igmp, BOND_DEFAULT_RESEND_IGMP);
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
resend_igmp = BOND_DEFAULT_RESEND_IGMP;
}
bonding: convert packets_per_slave to use the new option API This patch adds the necessary changes so packets_per_slave would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:18 +08:00
bond_opt_initval(&newval, packets_per_slave);
if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE), &newval)) {
bonding: extend round-robin mode with packets_per_slave This patch aims to extend round-robin mode with a new option called packets_per_slave which can have the following values and effects: 0 - choose a random slave 1 (default) - standard round-robin, 1 packet per slave >1 - round-robin when >1 packets have been transmitted per slave The allowed values are between 0 and 65535. This patch also fixes the comment style in bond_xmit_roundrobin(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 20:51:41 +08:00
pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n",
packets_per_slave, USHRT_MAX);
packets_per_slave = 1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (bond_mode == BOND_MODE_ALB) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
updelay);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (!miimon) {
if (updelay || downdelay) {
/* just warn the user the up/down delay will have
* no effect since miimon is zero...
*/
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
updelay, downdelay);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} else {
/* don't allow arp monitoring */
if (arp_interval) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
miimon, arp_interval);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
arp_interval = 0;
}
if ((updelay % miimon) != 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
updelay, miimon, (updelay / miimon) * miimon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
updelay /= miimon;
if ((downdelay % miimon) != 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
downdelay, miimon,
(downdelay / miimon) * miimon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
downdelay /= miimon;
}
if (arp_interval < 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
arp_interval, INT_MAX);
bonding: convert arp_interval to use the new option API This patch adds the necessary changes so arp_interval would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:23 +08:00
arp_interval = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: arp_ip_count and arp_targets can be wrong When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-18 09:18:30 +08:00
for (arp_ip_count = 0, i = 0;
(arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
bonding: add arp_ip_target checks when install the module When I install the bonding with the wrong arp_ip_target, just like arp_ip_target=500.500.500.500, the arp_ip_target was transfored to 245.245.245.244 and stored in the ip target success, it is uncorrect, so I add checks to avoid adding wrong address. The in4_pton() will set wrong ip address to 0.0.0.0 and return 0, also use the micro IS_IP_TARGET_UNUSABLE_ADDRESS to simplify the code. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-04 18:59:31 +08:00
__be32 ip;
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* not a complete check, but good enough to catch mistakes */
bonding: add arp_ip_target checks when install the module When I install the bonding with the wrong arp_ip_target, just like arp_ip_target=500.500.500.500, the arp_ip_target was transfored to 245.245.245.244 and stored in the ip target success, it is uncorrect, so I add checks to avoid adding wrong address. The in4_pton() will set wrong ip address to 0.0.0.0 and return 0, also use the micro IS_IP_TARGET_UNUSABLE_ADDRESS to simplify the code. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-04 18:59:31 +08:00
if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) ||
bonding: make IS_IP_TARGET_UNUSABLE_ADDRESS an inline function Also, use standard IP primitives to check the address. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:56 +08:00
!bond_is_ip_target_ok(ip)) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
arp_ip_target[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
arp_interval = 0;
} else {
bonding: don't add duplicate targets to arp_ip_target Print a warning and skip them. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:30 +08:00
if (bond_get_targets_ip(arp_target, ip) == -1)
arp_target[arp_ip_count++] = ip;
else
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
&ip);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
if (arp_interval && !arp_ip_count) {
/* don't allow arping if no arp_ip_target given... */
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
arp_interval);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
arp_interval = 0;
}
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
if (arp_validate) {
if (!arp_interval) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("arp_validate requires arp_interval\n");
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
return -EINVAL;
}
bonding: convert arp_validate to use the new option API This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:20 +08:00
bond_opt_initstr(&newval, arp_validate);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE),
&newval);
if (!valptr) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("Error: invalid arp_validate \"%s\"\n",
bonding: convert arp_validate to use the new option API This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:20 +08:00
arp_validate);
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
return -EINVAL;
}
bonding: convert arp_validate to use the new option API This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:20 +08:00
arp_validate_value = valptr->value;
} else {
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
arp_validate_value = 0;
bonding: convert arp_validate to use the new option API This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:20 +08:00
}
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
arp_all_targets_value = 0;
if (arp_all_targets) {
bonding: convert arp_all_targets to use the new option API This patch adds the necessary changes so arp_all_targets would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:21 +08:00
bond_opt_initstr(&newval, arp_all_targets);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
&newval);
if (!valptr) {
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
arp_all_targets);
arp_all_targets_value = 0;
bonding: convert arp_all_targets to use the new option API This patch adds the necessary changes so arp_all_targets would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:21 +08:00
} else {
arp_all_targets_value = valptr->value;
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (miimon) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_info("MII link monitoring set to %d ms\n", miimon);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else if (arp_interval) {
bonding: convert arp_validate to use the new option API This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:20 +08:00
valptr = bond_opt_get_val(BOND_OPT_ARP_VALIDATE,
arp_validate_value);
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
bonding: convert arp_validate to use the new option API This patch adds the necessary changes so arp_validate would use the new bonding option API. Also fix some trivial/style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:20 +08:00
arp_interval, valptr->string, arp_ip_count);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i < arp_ip_count; i++)
bonding: Neaten pr_<level> Add missing terminating newlines. Convert uses of pr_info to pr_cont in bond_check_params. Standardize upper/lower case styles. Typo fixes, remove unnecessary parentheses and periods. Alignment neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:01:45 +08:00
pr_cont(" %s", arp_ip_target[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Neaten pr_<level> Add missing terminating newlines. Convert uses of pr_info to pr_cont in bond_check_params. Standardize upper/lower case styles. Typo fixes, remove unnecessary parentheses and periods. Alignment neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:01:45 +08:00
pr_cont("\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bonding: Allow setting max_bonds to zero Permit bonding to function rationally if max_bonds is set to zero. This will load the module, but create no master devices (which can be created via sysfs). Requires some change to bond_create_sysfs; currently, the netdev sysfs directory is determined from the first bonding device created, but this is no longer possible. Instead, an interface from net/core is created to create and destroy files in net_class. Based on a patch submitted by Phil Oester <kernel@linuxaces.com>. Modified by Jay Vosburgh to fix the sysfs issue mentioned above and to update the documentation. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-14 09:12:04 +08:00
} else if (max_bonds) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* miimon and arp_interval not set, we need one so things
* work as expected, see bonding.txt for details
*/
bonding: Neaten pr_<level> Add missing terminating newlines. Convert uses of pr_info to pr_cont in bond_check_params. Standardize upper/lower case styles. Typo fixes, remove unnecessary parentheses and periods. Alignment neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 08:01:45 +08:00
pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
bonding: make USES_PRIMARY inline functions Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 03:39:54 +08:00
if (primary && !bond_mode_uses_primary(bond_mode)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
primary, bond_mode_name(bond_mode));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
primary = NULL;
}
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
if (primary && primary_reselect) {
bonding: convert primary_reselect to use the new option API This patch adds the necessary changes so primary_reselect would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:33 +08:00
bond_opt_initstr(&newval, primary_reselect);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT),
&newval);
if (!valptr) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("Error: Invalid primary_reselect \"%s\"\n",
bonding: convert primary_reselect to use the new option API This patch adds the necessary changes so primary_reselect would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:33 +08:00
primary_reselect);
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
return -EINVAL;
}
bonding: convert primary_reselect to use the new option API This patch adds the necessary changes so primary_reselect would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:33 +08:00
primary_reselect_value = valptr->value;
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
} else {
primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
}
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
if (fail_over_mac) {
bonding: convert fail_over_mac to use the new option API This patch adds the necessary changes so fail_over_mac would use the new bonding option API. Also fixes a trivial copy/paste error in bond_check_params where the wrong variable was used for the error msg. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:22 +08:00
bond_opt_initstr(&newval, fail_over_mac);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC),
&newval);
if (!valptr) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("Error: invalid fail_over_mac \"%s\"\n",
bonding: convert fail_over_mac to use the new option API This patch adds the necessary changes so fail_over_mac would use the new bonding option API. Also fixes a trivial copy/paste error in bond_check_params where the wrong variable was used for the error msg. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:22 +08:00
fail_over_mac);
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
return -EINVAL;
}
bonding: convert fail_over_mac to use the new option API This patch adds the necessary changes so fail_over_mac would use the new bonding option API. Also fixes a trivial copy/paste error in bond_check_params where the wrong variable was used for the error msg. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 21:53:22 +08:00
fail_over_mac_value = valptr->value;
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
if (bond_mode != BOND_MODE_ACTIVEBACKUP)
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
} else {
fail_over_mac_value = BOND_FOM_NONE;
}
net/bonding: Optionally allow ethernet slaves to keep own MAC Update the "don't change MAC of slaves" functionality added in previous changes to be a generic option, rather than something tied to IB devices, as it's occasionally useful for regular ethernet devices as well. Adds "fail_over_mac" option (which is automatically enabled for IB slaves), applicable only to active-backup mode. Includes documentation update. Updates bonding driver version to 3.2.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 10:57:24 +08:00
bonding: Allow userspace to set actors' system_priority in AD system This patch allows user to randomize the system-priority in an ad-system. The allowed range is 1 - 0xFFFF while default value is 0xFFFF. If user does not specify this value, the system defaults to 0xFFFF, which is what it was before this patch. Following example code could set the value - # modprobe bonding mode=4 # sys_prio=$(( 1 + RANDOM + RANDOM )) # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: * fixed up style issues reported by checkpatch * changed how the default value is set in bond_check_params(), this makes the default consistent between what gets set for a new bond and what the default is claimed to be in the bonding options.] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:55 +08:00
bond_opt_initstr(&newval, "default");
valptr = bond_opt_parse(
bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO),
&newval);
if (!valptr) {
pr_err("Error: No ad_actor_sys_prio default value");
return -EINVAL;
}
ad_actor_sys_prio = valptr->value;
bonding: Implement user key part of port_key in an AD system. The port key has three components - user-key, speed-part, and duplex-part. The LSBit is for the duplex-part, next 5 bits are for the speed while the remaining 10 bits are the user defined key bits. Get these 10 bits from the user-space (through the SysFs interface) and use it to form the admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If it is not provided then use zero for the user-key-bits (default). It can set using following example code - # modprobe bonding mode=4 # usr_port_key=$(( RANDOM & 0x3FF )) # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: * fixed up style issues reported by checkpatch * fixed up context from change in ad_actor_sys_prio patch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:57 +08:00
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY),
&newval);
if (!valptr) {
pr_err("Error: No ad_user_port_key default value");
return -EINVAL;
}
ad_user_port_key = valptr->value;
bonding: add option lp_interval for loading module The bond driver could set the lp_interval when loading module. Suggested-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21 14:40:12 +08:00
if (lp_interval == 0) {
bonding: Convert pr_warning to pr_warn, neatening Use more current logging style. Coalesce formats, realign arguments, drop unnecessary periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-16 07:57:04 +08:00
pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
bonding: add option lp_interval for loading module The bond driver could set the lp_interval when loading module. Suggested-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21 14:40:12 +08:00
lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* fill params struct with the proper values */
params->mode = bond_mode;
bonding: xor/802.3ad improved slave hash Add support for alternate slave selection algorithms to bonding balance-xor and 802.3ad modes. Default mode (what we have now: xor of MAC addresses) is "layer2", new choice is "layer3+4", using IP and port information for hashing to select peer. Originally submitted by Jason Gabler for balance-xor mode; modified by Jay Vosburgh to additionally support 802.3ad mode. Jason's original comment is as follows: The attached patch to the Linux Etherchannel Bonding driver modifies the driver's "balance-xor" mode as follows: - alternate hashing policy support for mode 2 * Added kernel parameter "xmit_policy" to allow the specification of different hashing policies for mode 2. The original mode 2 policy is the default, now found in xmit_hash_policy_layer2(). * Added xmit_hash_policy_layer34() This patch was inspired by hashing policies implemented by Cisco, Foundry and IBM, which are explained in Foundry documentation found at: http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750 Signed-off-by: Jason Gabler <jygabler@lbl.gov> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-27 05:54:11 +08:00
params->xmit_policy = xmit_hashtype;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
params->miimon = miimon;
ipv4, ipv6, bonding: Restore control over number of peer notifications For backward compatibility, we should retain the module parameters and sysfs attributes to control the number of peer notifications (gratuitous ARPs and unsolicited NAs) sent after bonding failover. Also, it is possible for failover to take place even though the new active slave does not have link up, and in that case the peer notification should be deferred until it does. Change ipv4 and ipv6 so they do not automatically send peer notifications on bonding failover. Change the bonding driver to send separate NETDEV_NOTIFY_PEERS notifications when the link is up, as many times as requested. Since it does not directly control which protocols send notifications, make num_grat_arp and num_unsol_na aliases for a single parameter. Bump the bonding version number and update its documentation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26 23:25:52 +08:00
params->num_peer_notif = num_peer_notif;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
params->arp_interval = arp_interval;
[PATCH] bonding: Validate probe replies in ARP monitor Add logic to check ARP request / reply packets used for ARP monitor link integrity checking. The current method simply examines the slave device to see if it has sent and received traffic; this can be fooled by extraneous traffic. For example, if multiple hosts running bonding are behind a common switch, the probe traffic from the multiple instances of bonding will update the tx/rx times on each other's slave devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-23 12:54:53 +08:00
params->arp_validate = arp_validate_value;
bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:34 +08:00
params->arp_all_targets = arp_all_targets_value;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
params->updelay = updelay;
params->downdelay = downdelay;
params->use_carrier = use_carrier;
params->lacp_fast = lacp_fast;
params->primary[0] = 0;
bonding: introduce primary_reselect option In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25 11:28:09 +08:00
params->primary_reselect = primary_reselect_value;
bonding: Add "follow" option to fail_over_mac Add a "follow" selection for fail_over_mac. This option causes the MAC address to move from slave to slave as the active slave changes. This is in addition to the existing fail_over_mac option that causes the bond's MAC address to change during failover. This new option is useful for devices that cannot tolerate multiple ports using the same MAC address simultaneously, either because it confuses them or incurs a performance penalty (as is the case with some LPAR-aware multiport devices). Because the MAC of the bond itself does not change, the "follow" option is slightly more reliable during failover and doesn't change the MAC of the bond during operation. This patch requires a previous ARP monitor change to properly handle RTNL during failovers. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 12:10:14 +08:00
params->fail_over_mac = fail_over_mac_value;
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:40:18 +08:00
params->tx_queues = tx_queues;
bonding: add all_slaves_active parameter v2: changed parameter name from 'keep_all' to 'all_slaves_active' and skipped setting slaves to inactive rather than creating a new flag at Jay's suggestion. In an effort to suppress duplicate frames on certain bonding modes (specifically the modes that do not require additional configuration on the switch or switches connected to the host), code was added in the generic receive patch in 2.6.16. The current behavior works quite well for most users, but there are some times it would be nice to restore old functionality and allow all frames to make their way up the stack. This patch adds support for a new module option and sysfs file called 'all_slaves_active' that will restore pre-2.6.16 functionality if the user desires. The default value is '0' and retains existing behavior, but the user can set it to '1' and allow all frames up if desired. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 16:39:21 +08:00
params->all_slaves_active = all_slaves_active;
bonding: add retransmit membership reports tunable Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 22:23:59 +08:00
params->resend_igmp = resend_igmp;
bonding: add min links parameter to 802.3ad This adds support for a configuring the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. See: http://bugzilla.vyatta.com/show_bug.cgi?id=7196 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22 17:54:39 +08:00
params->min_links = min_links;
bonding: add option lp_interval for loading module The bond driver could set the lp_interval when loading module. Suggested-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21 14:40:12 +08:00
params->lp_interval = lp_interval;
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
params->packets_per_slave = packets_per_slave;
bonding: Add tlb_dynamic_lb parameter for tlb mode The aggresive load balancing causes packet re-ordering as active flows are moved from a slave to another within the group. Sometime this aggresive lb is not necessary if the preference is for less re-ordering. This parameter if used with value "0" disables this dynamic flow shuffling minimizing packet re-ordering. Of course the side effect is that it has to live with the static load balancing that the hashing distribution provides. This impact is less severe if the correct xmit-hashing-policy is used for the tlb setup. The default value of the parameter is set to "1" mimicing the earlier behavior. Ran the netperf test with 200 stream for 1 min between two hosts with 4x1G trunk (xmit-lb mode with xmit-policy L3+4) before and after these changes. Following was the command used for those 200 instances - netperf -t TCP_RR -l 60 -s 5 -H <host> -- -r81920,81920 Transactions per second: Before change: 1,367.11 After change: 1,470.65 Change-Id: Ie3f75c77282cf602e83a6e833c6eb164e72a0990 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23 07:30:22 +08:00
params->tlb_dynamic_lb = 1; /* Default value */
bonding: Allow userspace to set actors' system_priority in AD system This patch allows user to randomize the system-priority in an ad-system. The allowed range is 1 - 0xFFFF while default value is 0xFFFF. If user does not specify this value, the system defaults to 0xFFFF, which is what it was before this patch. Following example code could set the value - # modprobe bonding mode=4 # sys_prio=$(( 1 + RANDOM + RANDOM )) # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: * fixed up style issues reported by checkpatch * changed how the default value is set in bond_check_params(), this makes the default consistent between what gets set for a new bond and what the default is claimed to be in the bonding options.] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:55 +08:00
params->ad_actor_sys_prio = ad_actor_sys_prio;
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:56 +08:00
eth_zero_addr(params->ad_actor_system);
bonding: Implement user key part of port_key in an AD system. The port key has three components - user-key, speed-part, and duplex-part. The LSBit is for the duplex-part, next 5 bits are for the speed while the remaining 10 bits are the user defined key bits. Get these 10 bits from the user-space (through the SysFs interface) and use it to form the admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If it is not provided then use zero for the user-key-bits (default). It can set using following example code - # modprobe bonding mode=4 # usr_port_key=$(( RANDOM & 0x3FF )) # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: * fixed up style issues reported by checkpatch * fixed up context from change in ad_actor_sys_prio patch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 15:01:57 +08:00
params->ad_user_port_key = ad_user_port_key;
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
if (packets_per_slave > 0) {
params->reciprocal_packets_per_slave =
reciprocal_value(packets_per_slave);
} else {
/* reciprocal_packets_per_slave is unused if
* packets_per_slave is 0 or 1, just initialize it
*/
params->reciprocal_packets_per_slave =
(struct reciprocal_value) { 0 };
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (primary) {
strncpy(params->primary, primary, IFNAMSIZ);
params->primary[IFNAMSIZ - 1] = 0;
}
memcpy(params->arp_targets, arp_target, sizeof(arp_target));
return 0;
}
[PATCH] bonding: lockdep annotation ============================================= [ INFO: possible recursive locking detected ] 2.6.17-1.2600.fc6 #1 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 11:51:01 +08:00
static struct lock_class_key bonding_netdev_xmit_lock_key;
netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep. The new address list lock needs to handle the same device layering issues that the _xmit_lock one does. This integrates work done by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23 05:16:42 +08:00
static struct lock_class_key bonding_netdev_addr_lock_key;
bonding: set qdisc_tx_busylock to avoid LOCKDEP splat If a qdisc is installed on a bonding device, its possible to get following lockdep splat under stress : ============================================= [ INFO: possible recursive locking detected ] 3.6.0+ #211 Not tainted --------------------------------------------- ping/4876 is trying to acquire lock: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 but task is already holding lock: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by ping/4876: #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e5030>] raw_sendmsg+0x600/0xc30 #1: (rcu_read_lock_bh){.+....}, at: [<ffffffff815ba4bd>] ip_finish_output+0x12d/0x870 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830 #3: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 #4: (&bond->lock){++.?..}, at: [<ffffffffa02128c1>] bond_start_xmit+0x31/0x4b0 [bonding] #5: (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830 stack backtrace: Pid: 4876, comm: ping Not tainted 3.6.0+ #211 Call Trace: [<ffffffff810a0145>] __lock_acquire+0x715/0x1b80 [<ffffffff810a256b>] ? mark_held_locks+0x9b/0x100 [<ffffffff810a1bf2>] lock_acquire+0x92/0x1d0 [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830 [<ffffffff81726b7c>] _raw_spin_lock+0x3c/0x50 [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830 [<ffffffff8106264d>] ? rcu_read_lock_bh_held+0x5d/0x90 [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570 [<ffffffffa0212a6a>] bond_start_xmit+0x1da/0x4b0 [bonding] [<ffffffff815796d0>] dev_hard_start_xmit+0x240/0x6b0 [<ffffffff81597c6e>] sch_direct_xmit+0xfe/0x2a0 [<ffffffff8157a249>] dev_queue_xmit+0x199/0x830 [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570 [<ffffffff815ba96f>] ip_finish_output+0x5df/0x870 [<ffffffff815ba4bd>] ? ip_finish_output+0x12d/0x870 [<ffffffff815bb964>] ip_output+0x54/0xf0 [<ffffffff815bad48>] ip_local_out+0x28/0x90 [<ffffffff815bc444>] ip_send_skb+0x14/0x50 [<ffffffff815bc4b2>] ip_push_pending_frames+0x32/0x40 [<ffffffff815e536a>] raw_sendmsg+0x93a/0xc30 [<ffffffff8128d570>] ? selinux_file_send_sigiotask+0x1f0/0x1f0 [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80 [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220 [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80 [<ffffffff815f6855>] inet_sendmsg+0x125/0x240 [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220 [<ffffffff8155cddb>] sock_sendmsg+0xab/0xe0 [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0 [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0 [<ffffffff8155d18c>] __sys_sendmsg+0x37c/0x390 [<ffffffff81195b2a>] ? fsnotify+0x2ca/0x7e0 [<ffffffff811958e8>] ? fsnotify+0x88/0x7e0 [<ffffffff81361f36>] ? put_ldisc+0x56/0xd0 [<ffffffff8116f98a>] ? fget_light+0x3da/0x510 [<ffffffff8155f6c4>] sys_sendmsg+0x44/0x80 [<ffffffff8172fc22>] system_call_fastpath+0x16/0x1b Avoid this problem using a distinct lock_class_key for bonding devices. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04 07:05:26 +08:00
static struct lock_class_key bonding_tx_busylock_key;
[PATCH] bonding: lockdep annotation ============================================= [ INFO: possible recursive locking detected ] 2.6.17-1.2600.fc6 #1 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 11:51:01 +08:00
netdev: Allocate multiple queues for TX. alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17 15:34:19 +08:00
static void bond_set_lockdep_class_one(struct net_device *dev,
struct netdev_queue *txq,
void *_unused)
netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue. Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09 14:13:53 +08:00
{
lockdep_set_class(&txq->_xmit_lock,
&bonding_netdev_xmit_lock_key);
}
static void bond_set_lockdep_class(struct net_device *dev)
{
netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep. The new address list lock needs to handle the same device layering issues that the _xmit_lock one does. This integrates work done by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23 05:16:42 +08:00
lockdep_set_class(&dev->addr_list_lock,
&bonding_netdev_addr_lock_key);
netdev: Allocate multiple queues for TX. alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17 15:34:19 +08:00
netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
bonding: set qdisc_tx_busylock to avoid LOCKDEP splat If a qdisc is installed on a bonding device, its possible to get following lockdep splat under stress : ============================================= [ INFO: possible recursive locking detected ] 3.6.0+ #211 Not tainted --------------------------------------------- ping/4876 is trying to acquire lock: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 but task is already holding lock: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by ping/4876: #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e5030>] raw_sendmsg+0x600/0xc30 #1: (rcu_read_lock_bh){.+....}, at: [<ffffffff815ba4bd>] ip_finish_output+0x12d/0x870 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830 #3: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 #4: (&bond->lock){++.?..}, at: [<ffffffffa02128c1>] bond_start_xmit+0x31/0x4b0 [bonding] #5: (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830 stack backtrace: Pid: 4876, comm: ping Not tainted 3.6.0+ #211 Call Trace: [<ffffffff810a0145>] __lock_acquire+0x715/0x1b80 [<ffffffff810a256b>] ? mark_held_locks+0x9b/0x100 [<ffffffff810a1bf2>] lock_acquire+0x92/0x1d0 [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830 [<ffffffff81726b7c>] _raw_spin_lock+0x3c/0x50 [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830 [<ffffffff8106264d>] ? rcu_read_lock_bh_held+0x5d/0x90 [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570 [<ffffffffa0212a6a>] bond_start_xmit+0x1da/0x4b0 [bonding] [<ffffffff815796d0>] dev_hard_start_xmit+0x240/0x6b0 [<ffffffff81597c6e>] sch_direct_xmit+0xfe/0x2a0 [<ffffffff8157a249>] dev_queue_xmit+0x199/0x830 [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570 [<ffffffff815ba96f>] ip_finish_output+0x5df/0x870 [<ffffffff815ba4bd>] ? ip_finish_output+0x12d/0x870 [<ffffffff815bb964>] ip_output+0x54/0xf0 [<ffffffff815bad48>] ip_local_out+0x28/0x90 [<ffffffff815bc444>] ip_send_skb+0x14/0x50 [<ffffffff815bc4b2>] ip_push_pending_frames+0x32/0x40 [<ffffffff815e536a>] raw_sendmsg+0x93a/0xc30 [<ffffffff8128d570>] ? selinux_file_send_sigiotask+0x1f0/0x1f0 [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80 [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220 [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80 [<ffffffff815f6855>] inet_sendmsg+0x125/0x240 [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220 [<ffffffff8155cddb>] sock_sendmsg+0xab/0xe0 [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0 [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0 [<ffffffff8155d18c>] __sys_sendmsg+0x37c/0x390 [<ffffffff81195b2a>] ? fsnotify+0x2ca/0x7e0 [<ffffffff811958e8>] ? fsnotify+0x88/0x7e0 [<ffffffff81361f36>] ? put_ldisc+0x56/0xd0 [<ffffffff8116f98a>] ? fget_light+0x3da/0x510 [<ffffffff8155f6c4>] sys_sendmsg+0x44/0x80 [<ffffffff8172fc22>] system_call_fastpath+0x16/0x1b Avoid this problem using a distinct lock_class_key for bonding devices. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04 07:05:26 +08:00
dev->qdisc_tx_busylock = &bonding_tx_busylock_key;
netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue. Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09 14:13:53 +08:00
}
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Called from registration process */
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
static int bond_init(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
bonding: convert bond_main.c to use netdev_printk instead of pr_ Converted only the parts where we've had a valid net_device, skipping the init/deinit and options verification. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 01:35:58 +08:00
netdev_dbg(bond_dev, "Begin bond_init\n");
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
bond->wq = create_singlethread_workqueue(bond_dev->name);
if (!bond->wq)
return -ENOMEM;
bond_set_lockdep_class(bond_dev);
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
list_add_tail(&bond->bond_list, &bn->dev_list);
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
bond: Simply bond sysfs group creation This patch delegates the work of creating the sysfs groups to the netdev layer and ultimately to the device layer. This closes races between uevents. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:22 +08:00
bond_prepare_sysfs_group(bond);
net: convert multicast list to list_head Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 05:22:57 +08:00
bonding: add the debugfs facility to the bonding driver This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 23:17:13 +08:00
bond_debug_register(bond);
bond: have random dev address by default instead of zeroes Makes more sense to have randomly generated address by default than to have all zeroes. It also allows user to for example put the bond into bridge without need to have any slaves in it. Also note that this changes only behaviour of bonds with no slaves. Once the first slave device is enslaved, its address will be used (no change here). Also, fix dev_assign_type values on the way. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:08:11 +08:00
/* Ensure valid dev_addr */
if (is_zero_ether_addr(bond_dev->dev_addr) &&
bonding: remove unnecessary dev_addr_from_first member In struct bonding there's a member called dev_addr_from_first which is used to denote when the bond dev should clone the first slave's MAC address but since we have netdev's addr_assign_type variable that is not necessary. We clone the first slave's MAC each time we have a random MAC set to the bond device. This has the nice side-effect of also fixing an inconsistency - when the MAC address of the bond dev is set after its creation, but prior to having slaves, it's not kept and the first slave's MAC is cloned. The only way to keep the MAC was to create the bond device with the MAC address set (e.g. through ip link). In all cases if the bond device is left without any slaves - its MAC gets reset to a random one as before. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 23:13:38 +08:00
bond_dev->addr_assign_type == NET_ADDR_PERM)
bond: have random dev address by default instead of zeroes Makes more sense to have randomly generated address by default than to have all zeroes. It also allows user to for example put the bond into bridge without need to have any slaves in it. Also note that this changes only behaviour of bonds with no slaves. Once the first slave device is enslaved, its address will be used (no change here). Also, fix dev_assign_type values on the way. Reported-by: Pavel Šimerda <psimerda@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:08:11 +08:00
eth_hw_addr_random(bond_dev);
bonding: initialization rework Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:52 +08:00
return 0;
}
bonding: push Netlink bits into separate file Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 23:43:33 +08:00
unsigned int bond_get_num_tx_queues(void)
bonding: implement get_tx_queues rtnk_link_op If bonding device is created via rtnl, it is created with default number of rx/tx queues. This patch implements callback in bonding so the correct value (previously specified by bonding module param) is used. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-10 14:09:44 +08:00
{
rtnetlink & bonding: change args got get_tx_queues Change get_tx_queues, drop unsused arg/return value real_tx_queues, and use return by value (with error) rather than call by reference. Probably bonding should just change to LLTX and the whole get_tx_queues API could disappear! Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11 02:34:43 +08:00
return tx_queues;
bonding: implement get_tx_queues rtnk_link_op If bonding device is created via rtnl, it is created with default number of rx/tx queues. This patch implements callback in bonding so the correct value (previously specified by bonding module param) is used. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-10 14:09:44 +08:00
}
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
/* Create a new bond based on the specified name and bonding parameters.
bonding: fix device name allocation error The code to select names for the bonding interfaces was, for the non-sysfs creation case, always using a hard-coded set of bond0, bond1, etc, up to max_bonds. This caused conflicts for the second or subsequent loads of the module. Changed the code to obtain device names from dev_alloc_name(). Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 10:15:31 +08:00
* If name is NULL, obtain a suitable "bond%d" name for us.
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
* Caller must NOT hold rtnl_lock; we need to release it here before we
* set up our sysfs entries.
*/
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
int bond_create(struct net *net, const char *name)
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
{
struct net_device *bond_dev;
net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table This patch fixes a Kernel Panic in bonding driver debugfs file: rlb_hash_table. $> modprobe bonding mode=6 $> cat /sys/kernel/debug/bonding/bond0/rlb_hash_table This will crash the kernel. The struct alb_bond_info is initialized only when the bonding interface is initialized (ip link set bond0 up) and not at the time it is allocated. If we try to read the table before that, it'll result in a kernel panic. The patch applies against both net and net-next Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 02:24:23 +08:00
struct bonding *bond;
struct alb_bond_info *bond_info;
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
int res;
rtnl_lock();
bonding: fix lock ordering for rtnl and bonding_rwsem Fix the handling of rtnl and the bonding_rwsem to always be acquired in a consistent order (rtnl, then bonding_rwsem). The existing code sometimes acquired them in this order, and sometimes in the opposite order, which opens a window for deadlock between ifenslave and sysfs. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18 08:25:02 +08:00
net: call dev_alloc_name from register_netdevice Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30 09:21:32 +08:00
bond_dev = alloc_netdev_mq(sizeof(struct bonding),
net: set name_assign_type in alloc_netdev() Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 22:37:24 +08:00
name ? name : "bond%d", NET_NAME_UNKNOWN,
net: call dev_alloc_name from register_netdevice Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30 09:21:32 +08:00
bond_setup, tx_queues);
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
if (!bond_dev) {
drivers/net/bonding/: : use pr_fmt Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 12:06:07 +08:00
pr_err("%s: eek! can't alloc netdev!\n", name);
bonding: fix potential deadlock in bond_uninit() bond_uninit() is invoked with rtnl_lock held, when it does destroy_workqueue() which will potentially flush all works in this workqueue, if we hold rtnl_lock again in the work function, it will deadlock. So move destroy_workqueue() to destructor where rtnl_lock is not held any more, suggested by Eric. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 05:30:52 +08:00
rtnl_unlock();
return -ENOMEM;
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
}
net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table This patch fixes a Kernel Panic in bonding driver debugfs file: rlb_hash_table. $> modprobe bonding mode=6 $> cat /sys/kernel/debug/bonding/bond0/rlb_hash_table This will crash the kernel. The struct alb_bond_info is initialized only when the bonding interface is initialized (ip link set bond0 up) and not at the time it is allocated. If we try to read the table before that, it'll result in a kernel panic. The patch applies against both net and net-next Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 02:24:23 +08:00
/*
* Initialize rx_hashtbl_used_head to RLB_NULL_INDEX.
* It is set to 0 by default which is wrong.
*/
bond = netdev_priv(bond_dev);
bond_info = &(BOND_ALB_INFO(bond));
bond_info->rx_hashtbl_used_head = RLB_NULL_INDEX;
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
dev_net_set(bond_dev, net);
bond: Implement a basic set of rtnl link ops This implements a basic set of rtnl link ops and takes advantage of the fact that rtnl_link_unregister kills all of the surviving devices to all us to kill bond_free_all. A module alias is added so ip link add can pull in the bonding module. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:25 +08:00
bond_dev->rtnl_link_ops = &bond_link_ops;
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
res = register_netdevice(bond_dev);
[PATCH] bonding: lockdep annotation ============================================= [ INFO: possible recursive locking detected ] 2.6.17-1.2600.fc6 #1 Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 11:51:01 +08:00
bonding: Call netif_carrier_off after register_netdevice Bringing up a bond interface with all network cables disconnected does not properly set the interface as DOWN because the call to netif_carrier_off occurs too early in bond_init. The call needs to occur after register_netdevice has set dev->reg_state to NETREG_REGISTERED, so that netif_carrier_off will trigger the call to linkwatch_fire_event. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14 14:22:05 +08:00
netif_carrier_off(bond_dev);
bonding: remove bonding read/write semaphore The whole read/write semaphore locking can be removed. It doesn't add any protection that isn't already done by using the RTNL mutex properly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:46 +08:00
rtnl_unlock();
bonding: fix potential deadlock in bond_uninit() bond_uninit() is invoked with rtnl_lock held, when it does destroy_workqueue() which will potentially flush all works in this workqueue, if we hold rtnl_lock again in the work function, it will deadlock. So move destroy_workqueue() to destructor where rtnl_lock is not held any more, suggested by Eric. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01 05:30:52 +08:00
if (res < 0)
bond_destructor(bond_dev);
bond: Simplify bond_create. Stop calling dev_get_by_name to see if the bond device already exists. register_netdevice already does that. Stop calling bond_deinit if register_netdevice fails as bond_uninit is guaranteed to be called if bond_init succeeds. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:23 +08:00
return res;
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
}
net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 11:35:32 +08:00
static int __net_init bond_net_init(struct net *net)
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
{
net: Simplify the bond drivers pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:46:04 +08:00
struct bond_net *bn = net_generic(net, bond_net_id);
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
bn->net = net;
INIT_LIST_HEAD(&bn->dev_list);
bond_create_proc_dir(bn);
bonding: Use a per netns implementation of /sys/class/net/bonding_masters. This fixes a network namespace misfeature that bonding_masters looked at current instead of the remembering the context where in which /sys/class/net/bonding_masters was opened in to see which network namespace to act upon. This removes the need for sysfs to handle tagged directories with untagged members allowing for a conceptually simpler sysfs implementation. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13 05:56:25 +08:00
bond_create_sysfs(bn);
bonding: add helper function bond_get_targets_ip(targets, ip) Add function bond_get_targets_ip(targets, ip) which searches through targets array of ips (arp_targets) and returns the position of first match. If ip == 0, returns the first free slot. On failure to find the ip or free slot, return -1. Use it to verify if the arp we've received is valid and in sysfs. v1->v2: Fix "[2/6] bonding: add helper function bond_get_targets_ip(targets, ip)", per Nikolay's advice, to verify if source ip != 0.0.0.0, otherwise we might update 'null' arp_ip_targets' last_rx. Also, address style. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 17:49:29 +08:00
net: Simplify the bond drivers pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:46:04 +08:00
return 0;
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
}
net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 11:35:32 +08:00
static void __net_exit bond_net_exit(struct net *net)
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
{
net: Simplify the bond drivers pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:46:04 +08:00
struct bond_net *bn = net_generic(net, bond_net_id);
bonding: fix bonding_masters race condition in bond unloading While the bonding module is unloading, it is considered that after rtnl_link_unregister all bond devices are destroyed but since no synchronization mechanism exists, a new bond device can be created via bonding_masters before unregister_pernet_subsys which would lead to multiple problems (e.g. NULL pointer dereference, wrong RIP, list corruption). This patch fixes the issue by removing any bond devices left in the netns after bonding_masters is removed from sysfs. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-06 08:54:38 +08:00
struct bonding *bond, *tmp_bond;
LIST_HEAD(list);
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
bonding: Use a per netns implementation of /sys/class/net/bonding_masters. This fixes a network namespace misfeature that bonding_masters looked at current instead of the remembering the context where in which /sys/class/net/bonding_masters was opened in to see which network namespace to act upon. This removes the need for sysfs to handle tagged directories with untagged members allowing for a conceptually simpler sysfs implementation. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13 05:56:25 +08:00
bond_destroy_sysfs(bn);
bonding: fix bonding_masters race condition in bond unloading While the bonding module is unloading, it is considered that after rtnl_link_unregister all bond devices are destroyed but since no synchronization mechanism exists, a new bond device can be created via bonding_masters before unregister_pernet_subsys which would lead to multiple problems (e.g. NULL pointer dereference, wrong RIP, list corruption). This patch fixes the issue by removing any bond devices left in the netns after bonding_masters is removed from sysfs. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-06 08:54:38 +08:00
/* Kill off any bonds created after unregistering bond rtnl ops */
rtnl_lock();
list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list)
unregister_netdevice_queue(bond->dev, &list);
unregister_netdevice_many(&list);
rtnl_unlock();
bonding: destroy proc directory only after all bonds are gone Currently we might arrive to bond_net_exit() with some bonds left (that were created while the module is unloading). We take care of that by destroying sysfs (the last possibility to add new bonds) and then destroying all the remaining bonds. However, we destroy the /proc/net/bonding directory before destroying those last bonds, and get a warning that we're trying to destroy a non-empty proc directory (containing /proc/net/bonding/bondX). Fix this by moving bond_destroy_proc_dir() after all the bonds are destroyed, so that we're sure that no bonds exist. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 18:04:08 +08:00
bond_destroy_proc_dir(bn);
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
}
static struct pernet_operations bond_net_ops = {
.init = bond_net_init,
.exit = bond_net_exit,
net: Simplify the bond drivers pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:46:04 +08:00
.id = &bond_net_id,
.size = sizeof(struct bond_net),
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int __init bonding_init(void)
{
int i;
int res;
bonding: move procfs code into bond_procfs.c V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David. bond_main.c is bloating, separate the procfs code out, move them to bond_procfs.c Signed-off-by: WANG Cong <amwang@redhat.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07 05:58:46 +08:00
pr_info("%s", bond_version);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
res = bond_check_params(&bonding_defaults);
bonding: fix style issues Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-13 03:02:48 +08:00
if (res)
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
net: Simplify the bond drivers pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:46:04 +08:00
res = register_pernet_subsys(&bond_net_ops);
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
if (res)
goto out;
bonding: fix lock ordering for rtnl and bonding_rwsem Fix the handling of rtnl and the bonding_rwsem to always be acquired in a consistent order (rtnl, then bonding_rwsem). The existing code sometimes acquired them in this order, and sometimes in the opposite order, which opens a window for deadlock between ifenslave and sysfs. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-18 08:25:02 +08:00
bonding: push Netlink bits into separate file Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 23:43:33 +08:00
res = bond_netlink_init();
bond: Implement a basic set of rtnl link ops This implements a basic set of rtnl link ops and takes advantage of the fact that rtnl_link_unregister kills all of the surviving devices to all us to kill bond_free_all. A module alias is added so ip link add can pull in the bonding module. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:25 +08:00
if (res)
bond: Get the rtnl_link_ops support correct - Don't call rtnl_link_unregister if rtnl_link_register fails - Set .priv_size so we aren't stomping on uninitialized memory when we use netdev_priv, on bond devices created with ip link add type bond. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30 07:58:54 +08:00
goto err_link;
bond: Implement a basic set of rtnl link ops This implements a basic set of rtnl link ops and takes advantage of the fact that rtnl_link_unregister kills all of the surviving devices to all us to kill bond_free_all. A module alias is added so ip link add can pull in the bonding module. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:25 +08:00
bonding: add the debugfs facility to the bonding driver This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 23:17:13 +08:00
bond_create_debugfs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i < max_bonds; i++) {
bond: Add support for multiple network namespaces Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:26 +08:00
res = bond_create(&init_net, NULL);
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
if (res)
goto err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
register_netdevice_notifier(&bond_netdev_notifier);
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
out:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return res;
bond: Implement a basic set of rtnl link ops This implements a basic set of rtnl link ops and takes advantage of the fact that rtnl_link_unregister kills all of the surviving devices to all us to kill bond_free_all. A module alias is added so ip link add can pull in the bonding module. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:25 +08:00
err:
bonding: Remove debug_fs files when module init fails Remove the bonding debug_fs entries when the module initialization fails. The debug_fs entries should be removed together with all other already allocated resources. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-09 18:52:59 +08:00
bond_destroy_debugfs();
bonding: push Netlink bits into separate file Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 23:43:33 +08:00
bond_netlink_fini();
bond: Get the rtnl_link_ops support correct - Don't call rtnl_link_unregister if rtnl_link_register fails - Set .priv_size so we aren't stomping on uninitialized memory when we use netdev_priv, on bond devices created with ip link add type bond. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30 07:58:54 +08:00
err_link:
net: Simplify the bond drivers pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 23:46:04 +08:00
unregister_pernet_subsys(&bond_net_ops);
bond: Implement a basic set of rtnl link ops This implements a basic set of rtnl link ops and takes advantage of the fact that rtnl_link_unregister kills all of the surviving devices to all us to kill bond_free_all. A module alias is added so ip link add can pull in the bonding module. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 22:18:25 +08:00
goto out;
[PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-10 02:36:04 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void __exit bonding_exit(void)
{
unregister_netdevice_notifier(&bond_netdev_notifier);
bonding: add the debugfs facility to the bonding driver This patch provides the debugfs facility to the bonding driver. The "bonding" directory is created in the debugfs root and directories of each bonding interface (like bond0, bond1...) are created in that. # mount -t debugfs none /sys/kernel/debug # ls /sys/kernel/debug/bonding bond0 bond1 Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 23:17:13 +08:00
bond_destroy_debugfs();
bonding: Deadlock between bonding_store_bonds and bond_destroy_sysfs. The sysfs layer has an internal protection, that ensures, that all the process sitting inside ->sore/->show callback exits before the appropriate entry is unregistered (the calltraces are rather big, but I can provide them if required). On the other hand, bonding takes rtnl_lock in a) the bonding_store_bonds, i.e. in ->store callback, b) module exit before calling the sysfs unregister routines. Thus, the classical AB-BA deadlock may occur. To reproduce run # while :; do modprobe bonding; rmmod bonding; done and # while :; do echo '+bond%d' > /sys/class/net/bonding_masters ; done in parallel. The fix is to move the bond_destroy_sysfs out of the rtnl_lock, but _before_ bond_free_all to make sure no bonding devices exist after module unload. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-03 08:49:39 +08:00
bonding: push Netlink bits into separate file Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 23:43:33 +08:00
bond_netlink_fini();
Revert "bonding: remove sysfs before removing devices" This reverts commit 4de79c737b200492195ebc54a887075327e1ec1d. This patch introduces a new bug which causes access to freed memory. In bond_uninit: list_del(&bond->bond_list); bond_list is linked in bond_net's dev_list which is freed by unregister_pernet_subsys. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-06 08:54:37 +08:00
unregister_pernet_subsys(&bond_net_ops);
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
bonding: trivial: style and comment fixes First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15 23:19:34 +08:00
/* Make sure we don't have an imbalance on our netpoll blocking */
net: Convert netpoll blocking api in bonding driver to be a counter A while back I made some changes to enable netpoll in the bonding driver. Among them was a per-cpu flag that indicated we were in a path that held locks which could cause the netpoll path to block in during tx, and as such the tx path should queue the frame for later use. This appears to have given rise to a regression. If one of those paths on which we hold the per-cpu flag yields the cpu, its possible for us to come back on a different cpu, leading to us clearing a different flag than we set. This results in odd netpoll drops, and BUG backtraces appearing in the log, as we check to make sure that we only clear set bits, and only set clear bits. I had though briefly about changing the offending paths so that they wouldn't sleep, but looking at my origional work more closely, it doesn't appear that a per-cpu flag is warranted. We alrady gate the checking of this flag on IFF_IN_NETPOLL, so we don't hit this in the normal tx case anyway. And practically speaking, the normal use case for netpoll is to only have one client anyway, so we're not going to erroneously queue netpoll frames when its actually safe to do so. As such, lets just convert that per-cpu flag to an atomic counter. It fixes the rescheduling bugs, is equivalent from a performance perspective and actually eliminates some code in the process. Tested by the reporter and myself, successfully Reported-by: Liang Zheng <lzheng@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06 17:05:50 +08:00
WARN_ON(atomic_read(&netpoll_block_tx));
bonding: Fix deadlock in bonding driver resulting from internal locking when using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-14 00:01:50 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
module_init(bonding_init);
module_exit(bonding_exit);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
Reference in New Issue Copy Permalink