korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-22 10:34:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
a57350216d
linux/arch/arm/boot/dts/imx53.dtsi

797 lines
20 KiB
Plaintext
Raw Normal View History

arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
ARM: imx: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 10:49:34 +08:00
#include "skeleton.dtsi"
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
#include "imx53-pinfunc.h"
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
/ {
aliases {
dts/imx: rename uart labels to consistent with hw spec UART1/UART2/... is more readable than UART0/UART1/... . Remove redundant UART comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:45 +08:00
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
ARM: dts: imx: add alias for gpio Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-05 14:01:28 +08:00
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
tzic: tz-interrupt-controller@0fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x0fffc000 0x4000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
ARM i.MX53: Add IPU support This adds the IPU device to the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-05 19:52:10 +08:00
ipu: ipu@18000000 {
#crtc-cells = <1>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
ARM i.MX5: Move IPU clock lookups into device tree Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-28 01:30:36 +08:00
clocks = <&clks 59>, <&clks 110>, <&clks 61>;
clock-names = "bus", "di0", "di1";
ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree Also, link SRC to IPU via phandle. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-29 00:35:23 +08:00
resets = <&src 2>;
ARM i.MX53: Add IPU support This adds the IPU device to the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-05 19:52:10 +08:00
};
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x10000000>;
ranges;
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
esdhc1: esdhc@50004000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
ARM i.MX dtsi: Add default bus-width property for esdhc controller According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-25 17:49:33 +08:00
bus-width = <4>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
esdhc2: esdhc@50008000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
ARM i.MX dtsi: Add default bus-width property for esdhc controller According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-25 17:49:33 +08:00
bus-width = <4>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart3: serial@5000c000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 32>, <&clks 33>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
ecspi1: ecspi@50010000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 51>, <&clks 52>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
ssi2: ssi@50014000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 49>;
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
esdhc3: esdhc@50020000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
ARM i.MX dtsi: Add default bus-width property for esdhc controller According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-25 17:49:33 +08:00
bus-width = <4>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
esdhc4: esdhc@50024000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
ARM i.MX dtsi: Add default bus-width property for esdhc controller According to Documentation/devicetree/bindings/mmc/mmc.txt bus-width is a mandatory property. While this is currently enforced nowhere, it's a good habit to just add the property now to allow to add common helper functionality for the mmc property parsing later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-25 17:49:33 +08:00
bus-width = <4>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
usbotg: usb@53f80000 {
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
ARM: dts: imx: add imx5x usbmisc entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-11 18:13:14 +08:00
fsl,usbmisc = <&usbmisc 0>;
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
usbh1: usb@53f80200 {
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
ARM: dts: imx: add imx5x usbmisc entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-11 18:13:14 +08:00
fsl,usbmisc = <&usbmisc 1>;
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
usbh2: usb@53f80400 {
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
ARM: dts: imx: add imx5x usbmisc entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-11 18:13:14 +08:00
fsl,usbmisc = <&usbmisc 2>;
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
usbh3: usb@53f80600 {
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
ARM: dts: imx: add imx5x usbmisc entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-11 18:13:14 +08:00
fsl,usbmisc = <&usbmisc 3>;
ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 18:35:57 +08:00
status = "disabled";
};
ARM: dts: imx: add imx5x usbmisc entries Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-11 18:13:14 +08:00
usbmisc: usbmisc@53f80800 {
#index-cells = <1>;
compatible = "fsl,imx53-usbmisc";
reg = <0x53f80800 0x200>;
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio1: gpio@53f84000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio2: gpio@53f88000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio3: gpio@53f8c000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio4: gpio@53f90000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
wdog1: wdog@53f98000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 0>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
wdog2: wdog@53f9c000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 0>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: i.MX53: Add GPT devicetree node The GPT is the GPT timer found on i.MX SoCs. This patch adds the devicetree node for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:00 +08:00
gpt: timer@53fa0000 {
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks 36>, <&clks 41>;
clock-names = "ipg", "per";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
iomuxc: iomuxc@53fa8000 {
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
audmux {
pinctrl_audmux_1: audmuxgrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
};
fec {
pinctrl_fec_1: fecgrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
};
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
csi {
pinctrl_csi_1: csigrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5
MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5
MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5
MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5
MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5
MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5
MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5
MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5
MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5
MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
>;
};
};
cspi {
pinctrl_cspi_1: cspigrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
>;
};
};
ARM: dts: imx53-evk: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-evk.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 21:47:36 +08:00
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
ARM: dts: imx53-evk: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-evk.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 21:47:36 +08:00
>;
};
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
esdhc1 {
pinctrl_esdhc1_1: esdhc1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
ARM: dts: imx53-ard: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-ard.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-02 22:48:39 +08:00
pinctrl_esdhc1_2: esdhc1grp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
ARM: dts: imx53-ard: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-ard.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-02 22:48:39 +08:00
>;
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
};
ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 22:22:33 +08:00
esdhc2 {
pinctrl_esdhc2_1: esdhc2grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 22:22:33 +08:00
>;
};
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
esdhc3 {
pinctrl_esdhc3_1: esdhc3grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
};
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
can1 {
pinctrl_can1_1: can1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000
MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
>;
};
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
pinctrl_can1_2: can1grp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
>;
};
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
};
can2 {
pinctrl_can2_1: can2grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
>;
};
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
};
i2c2 {
pinctrl_i2c2_1: i2c2grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
};
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
i2c3 {
pinctrl_i2c3_1: i2c3grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
>;
};
};
ARM: dts: Add device tree entry for onewire master on i.MX53 Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:46:19 +08:00
owire {
pinctrl_owire_1: owiregrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000
ARM: dts: Add device tree entry for onewire master on i.MX53 Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:46:19 +08:00
>;
};
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
>;
};
ARM: dts: imx53-ard: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-ard.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-02 22:48:39 +08:00
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
ARM: dts: imx53-ard: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-ard.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-02 22:48:39 +08:00
>;
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
};
ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 22:22:33 +08:00
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 22:22:33 +08:00
>;
};
};
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5
MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5
ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 22:22:33 +08:00
>;
};
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
pinctrl_uart3_2: uart3grp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
ARM: dts: imx53: pinctrl update Add pinctrl for cspi, csi. Add new pingroups for can1 and uart3. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-09 21:44:23 +08:00
>;
};
ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 22:22:33 +08:00
};
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
>;
};
};
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
ARM: dts: imx53: pinctl update This patch supplements pinctl support on i.MX53. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-25 19:26:39 +08:00
>;
};
};
ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 20:02:10 +08:00
};
ARM i.MX53: Add IOMUXC GPR to device tree Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-28 01:30:43 +08:00
gpr: iomuxc-gpr@53fa8000 {
compatible = "fsl,imx53-iomuxc-gpr", "syscon";
reg = <0x53fa8000 0xc>;
};
ARM i.MX53: Add LDB device to device tree Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-28 01:30:44 +08:00
ldb: ldb@53fa8008 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ldb";
reg = <0x53fa8008 0x4>;
gpr = <&gpr>;
clocks = <&clks 122>, <&clks 120>,
<&clks 115>, <&clks 116>,
<&clks 123>, <&clks 85>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
status = "disabled";
lvds-channel@0 {
reg = <0>;
crtcs = <&ipu 0>;
status = "disabled";
};
lvds-channel@1 {
reg = <1>;
crtcs = <&ipu 1>;
status = "disabled";
};
};
ARM i.MX53: Add pwm support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-04 18:30:37 +08:00
pwm1: pwm@53fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks 37>, <&clks 38>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@53fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks 39>, <&clks 40>;
clock-names = "ipg", "per";
interrupts = <94>;
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart1: serial@53fbc000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 28>, <&clks 29>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart2: serial@53fc0000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 30>, <&clks 31>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX53: dts: add flexcan to imx53 Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-18 17:42:43 +08:00
can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
ARM i.MX53: dts: add flexcan to imx53 Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-18 17:42:43 +08:00
status = "disabled";
};
can2: can@53fcc000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
ARM: mx5: Fix MX53 flexcan2 clock The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-07 22:27:00 +08:00
clocks = <&clks 87>, <&clks 86>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clock-names = "ipg", "per";
ARM i.MX53: dts: add flexcan to imx53 Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-18 17:42:43 +08:00
status = "disabled";
};
ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree Also, link SRC to IPU via phandle. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-29 00:35:23 +08:00
src: src@53fd0000 {
compatible = "fsl,imx53-src", "fsl,imx51-src";
reg = <0x53fd0000 0x4000>;
#reset-cells = <1>;
};
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio5: gpio@53fdc000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio6: gpio@53fe0000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
dts/imx: rename gpio labels to consistent with hw spec GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 09:26:44 +08:00
gpio7: gpio@53fe4000 {
gpio/mxc: use the edge_sel feature if available Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 03:04:06 +08:00
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53fe4000 0x4000>;
interrupts = <107 108>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
ARM: dts: imx: update #interrupt-cells for gpio nodes Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that the gpio irq type can be specified in device tree. Also update binding document to make it clear. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-06 20:03:37 +08:00
#interrupt-cells = <2>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
i2c3: i2c@53fec000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
#address-cells = <1>;
#size-cells = <0>;
i2c: imx: remove cpu_is_xxx by using platform_device_id This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-09-14 15:19:00 +08:00
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x53fec000 0x4000>;
interrupts = <64>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 88>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart4: serial@53ff0000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 65>, <&clks 66>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
};
aips@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000000 0x10000000>;
ranges;
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart5: serial@63f90000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 67>, <&clks 68>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: dts: Add device tree entry for onewire master on i.MX53 Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:46:19 +08:00
owire: owire@63fa4000 {
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
clocks = <&clks 159>;
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
ecspi2: ecspi@63fac000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 53>, <&clks 54>;
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
sdma: sdma@63fb0000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
ARM: dts: imx: Move SDMA firmware to SoC dtsi file Instead of adding sdma-ram-script-name into each board dts file, move it to the SoC dtsi file instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-08 22:28:07 +08:00
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
cspi: cspi@63fc0000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
ARM: dts: imx: fix clocks for cspi The CSPI controller has only one clock, but the driver spi-imx.c needs clock "per" to calculate bitrate divisor. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-23 19:38:05 +08:00
clocks = <&clks 55>, <&clks 55>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clock-names = "ipg", "per";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
i2c2: i2c@63fc4000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
#address-cells = <1>;
#size-cells = <0>;
i2c: imx: remove cpu_is_xxx by using platform_device_id This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-09-14 15:19:00 +08:00
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 35>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
i2c1: i2c@63fc8000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
#address-cells = <1>;
#size-cells = <0>;
i2c: imx: remove cpu_is_xxx by using platform_device_id This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-09-14 15:19:00 +08:00
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 34>;
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
ssi1: ssi@63fcc000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 48>;
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
audmux: audmux@63fd0000 {
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
nfc: nand@63fdb000 {
ARM: i.MX5: Add nand oftree support This adds snippets to the i.MX51/53 devicetrees for the nand flash controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-06-06 18:33:16 +08:00
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 60>;
ARM: i.MX5: Add nand oftree support This adds snippets to the i.MX51/53 devicetrees for the nand flash controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-06-06 18:33:16 +08:00
status = "disabled";
};
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
ssi3: ssi@63fe8000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 50>;
ARM: dts: imx53-qsb: enable audio support Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 13:12:01 +08:00
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
fec: ethernet@63fec000 {
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-21 23:43:05 +08:00
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
clock-names = "ipg", "ahb", "ptp";
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
status = "disabled";
};
};
};
};
Reference in New Issue Copy Permalink