linux/drivers/gpu/drm/i915/i915_drv.c

991 lines
27 KiB
C
Raw Normal View History

/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
*/
/*
*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <linux/device.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_drv.h"
#include <linux/console.h>
#include <linux/module.h>
#include "drm_crtc_helper.h"
static int i915_modeset __read_mostly = -1;
module_param_named(modeset, i915_modeset, int, 0400);
MODULE_PARM_DESC(modeset,
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
"1=on, -1=force vga console preference [default])");
unsigned int i915_fbpercrtc __always_unused = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
int i915_panel_ignore_lid __read_mostly = 0;
module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect [default], 1=lid open, "
"-1=lid closed)");
unsigned int i915_powersave __read_mostly = 1;
module_param_named(powersave, i915_powersave, int, 0600);
MODULE_PARM_DESC(powersave,
"Enable powersavings, fbc, downclocking, etc. (default: true)");
int i915_semaphores __read_mostly = -1;
module_param_named(semaphores, i915_semaphores, int, 0600);
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
int i915_enable_rc6 __read_mostly = -1;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6 (default: -1 (use per-chip default)");
int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
MODULE_PARM_DESC(i915_enable_fbc,
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
unsigned int i915_lvds_downclock __read_mostly = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
MODULE_PARM_DESC(lvds_downclock,
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
int i915_panel_use_ssc __read_mostly = -1;
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
int i915_vbt_sdvo_panel_type __read_mostly = -1;
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override selection of SDVO panel mode in the VBT "
"(default: auto)");
static bool i915_try_reset __read_mostly = true;
module_param_named(reset, i915_try_reset, bool, 0600);
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
bool i915_enable_hangcheck __read_mostly = true;
module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
static struct drm_driver driver;
extern int intel_agp_enabled;
#define INTEL_VGA_DEVICE(id, info) { \
.class = PCI_BASE_CLASS_DISPLAY << 16, \
.class_mask = 0xff0000, \
.vendor = 0x8086, \
.device = id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
.driver_data = (unsigned long) info }
static const struct intel_device_info intel_i830_info = {
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_845g_info = {
.gen = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i85x_info = {
.gen = 2, .is_i85x = 1, .is_mobile = 1,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i865g_info = {
.gen = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i915g_info = {
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i915gm_info = {
.gen = 3, .is_mobile = 1,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_i945g_info = {
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i945gm_info = {
.gen = 3, .is_i945gm = 1, .is_mobile = 1,
.has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_i965g_info = {
.gen = 4, .is_broadwater = 1,
.has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_i965gm_info = {
.gen = 4, .is_crestline = 1,
.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
.has_overlay = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_g33_info = {
.gen = 3, .is_g33 = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_g45_info = {
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_gm45_info = {
.gen = 4, .is_g4x = 1,
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.supports_tv = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_pineview_info = {
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5,
.need_gfx_hws = 1, .has_pipe_cxsr = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_ironlake_m_info = {
.gen = 5, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_sandybridge_d_info = {
.gen = 6,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
.gen = 6, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
};
static const struct intel_device_info intel_ivybridge_d_info = {
.is_ivybridge = 1, .gen = 7,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
.is_ivybridge = 1, .gen = 7, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 0, /* FBC is not enabled on Ivybridge mobile yet */
.has_bsd_ring = 1,
.has_blt_ring = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
INTEL_VGA_DEVICE(0x3577, &intel_i830_info), /* I830_M */
INTEL_VGA_DEVICE(0x2562, &intel_845g_info), /* 845_G */
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info), /* I855_GM */
INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
INTEL_VGA_DEVICE(0x2572, &intel_i865g_info), /* I865_G */
INTEL_VGA_DEVICE(0x2582, &intel_i915g_info), /* I915_G */
INTEL_VGA_DEVICE(0x258a, &intel_i915g_info), /* E7221_G */
INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info), /* I915_GM */
INTEL_VGA_DEVICE(0x2772, &intel_i945g_info), /* I945_G */
INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info), /* I945_GM */
INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info), /* I945_GME */
INTEL_VGA_DEVICE(0x2972, &intel_i965g_info), /* I946_GZ */
INTEL_VGA_DEVICE(0x2982, &intel_i965g_info), /* G35_G */
INTEL_VGA_DEVICE(0x2992, &intel_i965g_info), /* I965_Q */
INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info), /* I965_G */
INTEL_VGA_DEVICE(0x29b2, &intel_g33_info), /* Q35_G */
INTEL_VGA_DEVICE(0x29c2, &intel_g33_info), /* G33_G */
INTEL_VGA_DEVICE(0x29d2, &intel_g33_info), /* Q33_G */
INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info), /* I965_GM */
INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info), /* I965_GME */
INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info), /* GM45_G */
INTEL_VGA_DEVICE(0x2e02, &intel_g45_info), /* IGD_E_G */
INTEL_VGA_DEVICE(0x2e12, &intel_g45_info), /* Q45_G */
INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), /* G45_G */
INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), /* G41_G */
INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), /* B43_G */
INTEL_VGA_DEVICE(0x2e92, &intel_g45_info), /* B43_G.1 */
INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
INTEL_VGA_DEVICE(0x0102, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0112, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0122, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0106, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x0116, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x0126, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x010A, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0156, &intel_ivybridge_m_info), /* GT1 mobile */
INTEL_VGA_DEVICE(0x0166, &intel_ivybridge_m_info), /* GT2 mobile */
INTEL_VGA_DEVICE(0x0152, &intel_ivybridge_d_info), /* GT1 desktop */
INTEL_VGA_DEVICE(0x0162, &intel_ivybridge_d_info), /* GT2 desktop */
INTEL_VGA_DEVICE(0x015a, &intel_ivybridge_d_info), /* GT1 server */
{0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
#define INTEL_PCH_DEVICE_ID_MASK 0xff00
#define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
void intel_detect_pch(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pch;
/*
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
* make graphics device passthrough work easy for VMM, that only
* need to expose ISA bridge to let driver know the real hardware
* underneath. This is a requirement from virtualization team.
*/
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
if (pch) {
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
int id;
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_IBX;
DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
/* PantherPoint is CPT compatible */
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found PatherPoint PCH\n");
}
}
pci_dev_put(pch);
}
}
void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
int count;
count = 0;
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
udelay(10);
I915_WRITE_NOTRACE(FORCEWAKE, 1);
POSTING_READ(FORCEWAKE);
count = 0;
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1) == 0)
udelay(10);
}
void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
{
int count;
count = 0;
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
udelay(10);
I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1);
POSTING_READ(FORCEWAKE_MT);
count = 0;
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
udelay(10);
}
/*
* Generally this is called implicitly by the register read function. However,
* if some sequence requires the GT to not power down then this function should
* be called at the beginning of the sequence followed by a call to
* gen6_gt_force_wake_put() at the end of the sequence.
*/
void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
if (dev_priv->forcewake_count++ == 0)
dev_priv->display.force_wake_get(dev_priv);
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
}
void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE, 0);
POSTING_READ(FORCEWAKE);
}
void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 0);
POSTING_READ(FORCEWAKE_MT);
}
/*
* see gen6_gt_force_wake_get()
*/
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
if (--dev_priv->forcewake_count == 0)
dev_priv->display.force_wake_put(dev_priv);
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
}
void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
{
if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
int loop = 500;
u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
udelay(10);
fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
}
WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES);
dev_priv->gt_fifo_count = fifo;
}
dev_priv->gt_fifo_count--;
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm_kms_helper_poll_disable(dev);
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error = i915_gem_idle(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
drm_irq_uninstall(dev);
}
i915_save_state(dev);
intel_opregion_fini(dev);
/* Modeset on resume, not lid events */
dev_priv->modeset_on_lid = 0;
return 0;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int i915_suspend(struct drm_device *dev, pm_message_t state)
{
int error;
if (!dev || !dev->dev_private) {
DRM_ERROR("dev: %p\n", dev);
DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW)
return 0;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
error = i915_drm_freeze(dev);
if (error)
return error;
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
pci_disable_device(dev->pdev);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
return 0;
}
static int i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
if (HAS_PCH_SPLIT(dev))
ironlake_init_pch_refclk(dev);
drm_mode_config_reset(dev);
drm_irq_install(dev);
/* Resume the modeset for every activated CRTC */
drm_helper_resume_force_mode(dev);
if (IS_IRONLAKE_M(dev))
ironlake_enable_rc6(dev);
}
intel_opregion_init(dev);
dev_priv->modeset_on_lid = 0;
return error;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int i915_resume(struct drm_device *dev)
{
int ret;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
ret = i915_drm_thaw(dev);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
static int i8xx_do_reset(struct drm_device *dev, u8 flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_I85X(dev))
return -ENODEV;
I915_WRITE(D_STATE, I915_READ(D_STATE) | DSTATE_GFX_RESET_I830);
POSTING_READ(D_STATE);
if (IS_I830(dev) || IS_845G(dev)) {
I915_WRITE(DEBUG_RESET_I830,
DEBUG_RESET_DISPLAY |
DEBUG_RESET_RENDER |
DEBUG_RESET_FULL);
POSTING_READ(DEBUG_RESET_I830);
msleep(1);
I915_WRITE(DEBUG_RESET_I830, 0);
POSTING_READ(DEBUG_RESET_I830);
}
msleep(1);
I915_WRITE(D_STATE, I915_READ(D_STATE) & ~DSTATE_GFX_RESET_I830);
POSTING_READ(D_STATE);
return 0;
}
static int i965_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
return gdrst & 0x1;
}
static int i965_do_reset(struct drm_device *dev, u8 flags)
{
u8 gdrst;
/*
* Set the domains we want to reset (GRDOM/bits 2 and 3) as
* well as the reset bit (GR/bit 0). Setting the GR bit
* triggers the reset; when done, the hardware will clear it.
*/
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
pci_write_config_byte(dev->pdev, I965_GDRST, gdrst | flags | 0x1);
return wait_for(i965_reset_complete(dev), 500);
}
static int ironlake_do_reset(struct drm_device *dev, u8 flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, gdrst | flags | 0x1);
return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
}
static int gen6_do_reset(struct drm_device *dev, u8 flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
unsigned long irqflags;
/* Hold gt_lock across reset to prevent any register access
* with forcewake not set correctly
*/
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
/* Reset the chip */
/* GEN6_GDRST is not in the gt power well, no need to check
* for fifo space for the write or forcewake the chip for
* the read
*/
I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);
/* Spin waiting for the device to ack the reset request */
ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
/* If reset with a user forcewake, try to restore, otherwise turn it off */
if (dev_priv->forcewake_count)
dev_priv->display.force_wake_get(dev_priv);
else
dev_priv->display.force_wake_put(dev_priv);
/* Restore fifo count */
dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
return ret;
}
/**
* i965_reset - reset chip after a hang
* @dev: drm device to reset
* @flags: reset domains
*
* Reset the chip. Useful if a hang is detected. Returns zero on successful
* reset or otherwise an error code.
*
* Procedure is fairly simple:
* - reset the chip using the reset reg
* - re-init context state
* - re-init hardware status page
* - re-init ring buffer
* - re-init interrupt state
* - re-init display
*/
int i915_reset(struct drm_device *dev, u8 flags)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/*
* We really should only reset the display subsystem if we actually
* need to
*/
bool need_display = true;
int ret;
if (!i915_try_reset)
return 0;
if (!mutex_trylock(&dev->struct_mutex))
return -EBUSY;
i915_gem_reset(dev);
ret = -ENODEV;
if (get_seconds() - dev_priv->last_gpu_reset < 5) {
DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
} else switch (INTEL_INFO(dev)->gen) {
case 7:
case 6:
ret = gen6_do_reset(dev, flags);
break;
case 5:
ret = ironlake_do_reset(dev, flags);
break;
case 4:
ret = i965_do_reset(dev, flags);
break;
case 2:
ret = i8xx_do_reset(dev, flags);
break;
}
dev_priv->last_gpu_reset = get_seconds();
if (ret) {
DRM_ERROR("Failed to reset chip.\n");
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* Ok, now get things going again... */
/*
* Everything depends on having the GTT running, so we need to start
* there. Fortunately we don't need to do this unless we reset the
* chip at a PCI level.
*
* Next we need to restore the context, but we don't use those
* yet either...
*
* Ring buffer needs to be re-initialized in the KMS case, or if X
* was running at the time of the reset (i.e. we weren't VT
* switched away).
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
!dev_priv->mm.suspended) {
dev_priv->mm.suspended = 0;
dev_priv->ring[RCS].init(&dev_priv->ring[RCS]);
if (HAS_BSD(dev))
dev_priv->ring[VCS].init(&dev_priv->ring[VCS]);
if (HAS_BLT(dev))
dev_priv->ring[BCS].init(&dev_priv->ring[BCS]);
mutex_unlock(&dev->struct_mutex);
drm_irq_uninstall(dev);
drm_mode_config_reset(dev);
drm_irq_install(dev);
mutex_lock(&dev->struct_mutex);
}
mutex_unlock(&dev->struct_mutex);
/*
* Perform a full modeset as on later generations, e.g. Ironlake, we may
* need to retrain the display link and cannot just restore the register
* values.
*/
if (need_display) {
mutex_lock(&dev->mode_config.mutex);
drm_helper_resume_force_mode(dev);
mutex_unlock(&dev->mode_config.mutex);
}
return 0;
}
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
/* Only bind to function 0 of the device. Early generations
* used function 1 as a placeholder for multi-head. This causes
* us confusion instead, especially on the systems where both
* functions have the same PCI-ID!
*/
if (PCI_FUNC(pdev->devfn))
return -ENODEV;
return drm_get_pci_dev(pdev, ent, &driver);
}
static void
i915_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
drm_put_dev(dev);
}
static int i915_pm_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
int error;
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
error = i915_drm_freeze(drm_dev);
if (error)
return error;
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static int i915_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_resume(drm_dev);
}
static int i915_pm_freeze(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
return i915_drm_freeze(drm_dev);
}
static int i915_pm_thaw(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_thaw(drm_dev);
}
static int i915_pm_poweroff(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_freeze(drm_dev);
}
static const struct dev_pm_ops i915_pm_ops = {
.suspend = i915_pm_suspend,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
.restore = i915_pm_resume,
};
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static const struct file_operations i915_driver_fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.unlocked_ioctl = drm_ioctl,
.mmap = drm_gem_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
.read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = i915_compat_ioctl,
#endif
.llseek = noop_llseek,
};
static struct drm_driver driver = {
/* Don't use MTRRs here; the Xserver or userspace app should
* deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM,
.load = i915_driver_load,
.unload = i915_driver_unload,
.open = i915_driver_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.reclaim_buffers = drm_core_reclaim_buffers,
.master_create = i915_master_create,
.master_destroy = i915_master_destroy,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = i915_debugfs_init,
.debugfs_cleanup = i915_debugfs_cleanup,
#endif
.gem_init_object = i915_gem_init_object,
.gem_free_object = i915_gem_free_object,
.gem_vm_ops = &i915_gem_vm_ops,
.dumb_create = i915_gem_dumb_create,
.dumb_map_offset = i915_gem_mmap_gtt,
.dumb_destroy = i915_gem_dumb_destroy,
.ioctls = i915_ioctls,
.fops = &i915_driver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static struct pci_driver i915_pci_driver = {
.name = DRIVER_NAME,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
.driver.pm = &i915_pm_ops,
};
static int __init i915_init(void)
{
if (!intel_agp_enabled) {
DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
return -ENODEV;
}
driver.num_ioctls = i915_max_ioctl;
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
*
* Otherwise, just follow the parameter (defaulting to off).
*
* Allow optional vga_text_mode_force boot option to override
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
if (i915_modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
if (i915_modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force() && i915_modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
if (!(driver.driver_features & DRIVER_MODESET))
driver.get_vblank_timestamp = NULL;
return drm_pci_init(&driver, &i915_pci_driver);
}
static void __exit i915_exit(void)
{
drm_pci_exit(&driver, &i915_pci_driver);
}
module_init(i915_init);
module_exit(i915_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
u##x val = 0; \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
unsigned long irqflags; \
spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
if (dev_priv->forcewake_count == 0) \
dev_priv->display.force_wake_get(dev_priv); \
val = read##y(dev_priv->regs + reg); \
if (dev_priv->forcewake_count == 0) \
dev_priv->display.force_wake_put(dev_priv); \
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
} else { \
val = read##y(dev_priv->regs + reg); \
} \
trace_i915_reg_rw(false, reg, val, sizeof(val)); \
return val; \
}
__i915_read(8, b)
__i915_read(16, w)
__i915_read(32, l)
__i915_read(64, q)
#undef __i915_read
#define __i915_write(x, y) \
void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
trace_i915_reg_rw(true, reg, val, sizeof(val)); \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
__gen6_gt_wait_for_fifo(dev_priv); \
} \
write##y(val, dev_priv->regs + reg); \
}
__i915_write(8, b)
__i915_write(16, w)
__i915_write(32, l)
__i915_write(64, q)
#undef __i915_write