linux/drivers/pinctrl/samsung/pinctrl-samsung.c

1312 lines
35 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
//
// Copyright (c) 2012 Samsung Electronics Co., Ltd.
// http://www.samsung.com
// Copyright (c) 2012 Linaro Ltd
// http://www.linaro.org
//
// Author: Thomas Abraham <thomas.ab@samsung.com>
//
// This driver implements the Samsung pinctrl driver. It supports setting up of
// pinmux and pinconf configurations. The gpiolib interface is also included.
// External interrupt (gpio and wakeup) support are not included in this driver
// but provides extensions to which platform specific implementation of the gpio
// and wakeup interrupts can be hooked to.
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/irqdomain.h>
#include <linux/of_device.h>
#include <linux/spinlock.h>
#include <dt-bindings/pinctrl/samsung.h>
#include "../core.h"
#include "pinctrl-samsung.h"
/* maximum number of the memory resources */
#define SAMSUNG_PINCTRL_NUM_RESOURCES 2
/* list of all possible config options supported */
static struct pin_config {
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
const char *property;
enum pincfg_type param;
} cfg_params[] = {
{ "samsung,pin-pud", PINCFG_TYPE_PUD },
{ "samsung,pin-drv", PINCFG_TYPE_DRV },
{ "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN },
{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
{ "samsung,pin-val", PINCFG_TYPE_DAT },
};
static unsigned int pin_base;
static int samsung_get_group_count(struct pinctrl_dev *pctldev)
{
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
struct samsung_pinctrl_drv_data *pmx = pinctrl_dev_get_drvdata(pctldev);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return pmx->nr_groups;
}
static const char *samsung_get_group_name(struct pinctrl_dev *pctldev,
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
unsigned group)
{
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
struct samsung_pinctrl_drv_data *pmx = pinctrl_dev_get_drvdata(pctldev);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return pmx->pin_groups[group].name;
}
static int samsung_get_group_pins(struct pinctrl_dev *pctldev,
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
unsigned group,
const unsigned **pins,
unsigned *num_pins)
{
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
struct samsung_pinctrl_drv_data *pmx = pinctrl_dev_get_drvdata(pctldev);
*pins = pmx->pin_groups[group].pins;
*num_pins = pmx->pin_groups[group].num_pins;
return 0;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
static int reserve_map(struct device *dev, struct pinctrl_map **map,
unsigned *reserved_maps, unsigned *num_maps,
unsigned reserve)
{
unsigned old_num = *reserved_maps;
unsigned new_num = *num_maps + reserve;
struct pinctrl_map *new_map;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
if (old_num >= new_num)
return 0;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
if (!new_map)
return -ENOMEM;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
*map = new_map;
*reserved_maps = new_num;
return 0;
}
static int add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps,
unsigned *num_maps, const char *group,
const char *function)
{
if (WARN_ON(*num_maps == *reserved_maps))
return -ENOSPC;
(*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
(*map)[*num_maps].data.mux.group = group;
(*map)[*num_maps].data.mux.function = function;
(*num_maps)++;
return 0;
}
static int add_map_configs(struct device *dev, struct pinctrl_map **map,
unsigned *reserved_maps, unsigned *num_maps,
const char *group, unsigned long *configs,
unsigned num_configs)
{
unsigned long *dup_configs;
if (WARN_ON(*num_maps == *reserved_maps))
return -ENOSPC;
dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
GFP_KERNEL);
if (!dup_configs)
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return -ENOMEM;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
(*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
(*map)[*num_maps].data.configs.group_or_pin = group;
(*map)[*num_maps].data.configs.configs = dup_configs;
(*map)[*num_maps].data.configs.num_configs = num_configs;
(*num_maps)++;
return 0;
}
static int add_config(struct device *dev, unsigned long **configs,
unsigned *num_configs, unsigned long config)
{
unsigned old_num = *num_configs;
unsigned new_num = old_num + 1;
unsigned long *new_configs;
new_configs = krealloc(*configs, sizeof(*new_configs) * new_num,
GFP_KERNEL);
if (!new_configs)
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return -ENOMEM;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
new_configs[old_num] = config;
*configs = new_configs;
*num_configs = new_num;
return 0;
}
static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map,
unsigned num_maps)
{
int i;
for (i = 0; i < num_maps; i++)
if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
kfree(map[i].data.configs.configs);
kfree(map);
}
static int samsung_dt_subnode_to_map(struct samsung_pinctrl_drv_data *drvdata,
struct device *dev,
struct device_node *np,
struct pinctrl_map **map,
unsigned *reserved_maps,
unsigned *num_maps)
{
int ret, i;
u32 val;
unsigned long config;
unsigned long *configs = NULL;
unsigned num_configs = 0;
unsigned reserve;
struct property *prop;
const char *group;
bool has_func = false;
ret = of_property_read_u32(np, "samsung,pin-function", &val);
if (!ret)
has_func = true;
for (i = 0; i < ARRAY_SIZE(cfg_params); i++) {
ret = of_property_read_u32(np, cfg_params[i].property, &val);
if (!ret) {
config = PINCFG_PACK(cfg_params[i].param, val);
ret = add_config(dev, &configs, &num_configs, config);
if (ret < 0)
goto exit;
/* EINVAL=missing, which is fine since it's optional */
} else if (ret != -EINVAL) {
dev_err(dev, "could not parse property %s\n",
cfg_params[i].property);
}
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
reserve = 0;
if (has_func)
reserve++;
if (num_configs)
reserve++;
ret = of_property_count_strings(np, "samsung,pins");
if (ret < 0) {
dev_err(dev, "could not parse property samsung,pins\n");
goto exit;
}
reserve *= ret;
ret = reserve_map(dev, map, reserved_maps, num_maps, reserve);
if (ret < 0)
goto exit;
of_property_for_each_string(np, "samsung,pins", prop, group) {
if (has_func) {
ret = add_map_mux(map, reserved_maps,
num_maps, group, np->full_name);
if (ret < 0)
goto exit;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
if (num_configs) {
ret = add_map_configs(dev, map, reserved_maps,
num_maps, group, configs,
num_configs);
if (ret < 0)
goto exit;
}
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
ret = 0;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
exit:
kfree(configs);
return ret;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config,
struct pinctrl_map **map,
unsigned *num_maps)
{
struct samsung_pinctrl_drv_data *drvdata;
unsigned reserved_maps;
struct device_node *np;
int ret;
drvdata = pinctrl_dev_get_drvdata(pctldev);
reserved_maps = 0;
*map = NULL;
*num_maps = 0;
if (!of_get_child_count(np_config))
return samsung_dt_subnode_to_map(drvdata, pctldev->dev,
np_config, map,
&reserved_maps,
num_maps);
for_each_child_of_node(np_config, np) {
ret = samsung_dt_subnode_to_map(drvdata, pctldev->dev, np, map,
&reserved_maps, num_maps);
if (ret < 0) {
samsung_dt_free_map(pctldev, *map, *num_maps);
of_node_put(np);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return ret;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return 0;
}
#ifdef CONFIG_DEBUG_FS
/* Forward declaration which can be used by samsung_pin_dbg_show */
static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config);
static const char * const reg_names[] = {"CON", "DAT", "PUD", "DRV", "CON_PDN",
"PUD_PDN"};
static void samsung_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned int pin)
{
enum pincfg_type cfg_type;
unsigned long config;
int ret;
for (cfg_type = 0; cfg_type < PINCFG_TYPE_NUM; cfg_type++) {
config = PINCFG_PACK(cfg_type, 0);
ret = samsung_pinconf_get(pctldev, pin, &config);
if (ret < 0)
continue;
seq_printf(s, " %s(0x%lx)", reg_names[cfg_type],
PINCFG_UNPACK_VALUE(config));
}
}
#endif
/* list of pinctrl callbacks for the pinctrl core */
static const struct pinctrl_ops samsung_pctrl_ops = {
.get_groups_count = samsung_get_group_count,
.get_group_name = samsung_get_group_name,
.get_group_pins = samsung_get_group_pins,
.dt_node_to_map = samsung_dt_node_to_map,
.dt_free_map = samsung_dt_free_map,
#ifdef CONFIG_DEBUG_FS
.pin_dbg_show = samsung_pin_dbg_show,
#endif
};
/* check if the selector is a valid pin function selector */
static int samsung_get_functions_count(struct pinctrl_dev *pctldev)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
return drvdata->nr_functions;
}
/* return the name of the pin function specified */
static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
return drvdata->pmx_functions[selector].name;
}
/* return the groups associated for the specified function selector */
static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
unsigned selector, const char * const **groups,
unsigned * const num_groups)
{
struct samsung_pinctrl_drv_data *drvdata;
drvdata = pinctrl_dev_get_drvdata(pctldev);
*groups = drvdata->pmx_functions[selector].groups;
*num_groups = drvdata->pmx_functions[selector].num_groups;
return 0;
}
/*
* given a pin number that is local to a pin controller, find out the pin bank
* and the register base of the pin bank.
*/
static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
unsigned pin, void __iomem **reg, u32 *offset,
struct samsung_pin_bank **bank)
{
struct samsung_pin_bank *b;
b = drvdata->pin_banks;
while ((pin >= b->pin_base) &&
((b->pin_base + b->nr_pins - 1) < pin))
b++;
*reg = b->pctl_base + b->pctl_offset;
*offset = pin - b->pin_base;
if (bank)
*bank = b;
}
/* enable or disable a pinmux function */
static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group)
{
struct samsung_pinctrl_drv_data *drvdata;
const struct samsung_pin_bank_type *type;
struct samsung_pin_bank *bank;
void __iomem *reg;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
u32 mask, shift, data, pin_offset;
unsigned long flags;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
const struct samsung_pmx_func *func;
const struct samsung_pin_group *grp;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
func = &drvdata->pmx_functions[selector];
grp = &drvdata->pin_groups[group];
pin_to_reg_bank(drvdata, grp->pins[0] - drvdata->pin_base,
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
&reg, &pin_offset, &bank);
type = bank->type;
mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1;
shift = pin_offset * type->fld_width[PINCFG_TYPE_FUNC];
if (shift >= 32) {
/* Some banks have two config registers */
shift -= 32;
reg += 4;
}
raw_spin_lock_irqsave(&bank->slock, flags);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
data = readl(reg + type->reg_offset[PINCFG_TYPE_FUNC]);
data &= ~(mask << shift);
data |= func->val << shift;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
writel(data, reg + type->reg_offset[PINCFG_TYPE_FUNC]);
raw_spin_unlock_irqrestore(&bank->slock, flags);
}
/* enable a specified pinmux by writing to registers */
static int samsung_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned selector,
unsigned group)
{
samsung_pinmux_setup(pctldev, selector, group);
return 0;
}
/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
static const struct pinmux_ops samsung_pinmux_ops = {
.get_functions_count = samsung_get_functions_count,
.get_function_name = samsung_pinmux_get_fname,
.get_function_groups = samsung_pinmux_get_groups,
.set_mux = samsung_pinmux_set_mux,
};
/* set or get the pin config settings for a specified pin */
static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config, bool set)
{
struct samsung_pinctrl_drv_data *drvdata;
const struct samsung_pin_bank_type *type;
struct samsung_pin_bank *bank;
void __iomem *reg_base;
enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
u32 data, width, pin_offset, mask, shift;
u32 cfg_value, cfg_reg;
unsigned long flags;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pin_to_reg_bank(drvdata, pin - drvdata->pin_base, &reg_base,
&pin_offset, &bank);
type = bank->type;
if (cfg_type >= PINCFG_TYPE_NUM || !type->fld_width[cfg_type])
return -EINVAL;
width = type->fld_width[cfg_type];
cfg_reg = type->reg_offset[cfg_type];
raw_spin_lock_irqsave(&bank->slock, flags);
mask = (1 << width) - 1;
shift = pin_offset * width;
data = readl(reg_base + cfg_reg);
if (set) {
cfg_value = PINCFG_UNPACK_VALUE(*config);
data &= ~(mask << shift);
data |= (cfg_value << shift);
writel(data, reg_base + cfg_reg);
} else {
data >>= shift;
data &= mask;
*config = PINCFG_PACK(cfg_type, data);
}
raw_spin_unlock_irqrestore(&bank->slock, flags);
return 0;
}
/* set the pin config settings for a specified pin */
static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned num_configs)
{
int i, ret;
for (i = 0; i < num_configs; i++) {
ret = samsung_pinconf_rw(pctldev, pin, &configs[i], true);
if (ret < 0)
return ret;
} /* for each config */
return 0;
}
/* get the pin config settings for a specified pin */
static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
return samsung_pinconf_rw(pctldev, pin, config, false);
}
/* set the pin config settings for a specified pin group */
static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev,
unsigned group, unsigned long *configs,
unsigned num_configs)
{
struct samsung_pinctrl_drv_data *drvdata;
const unsigned int *pins;
unsigned int cnt;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pins = drvdata->pin_groups[group].pins;
for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++)
samsung_pinconf_set(pctldev, pins[cnt], configs, num_configs);
return 0;
}
/* get the pin config settings for a specified pin group */
static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
unsigned int group, unsigned long *config)
{
struct samsung_pinctrl_drv_data *drvdata;
const unsigned int *pins;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pins = drvdata->pin_groups[group].pins;
samsung_pinconf_get(pctldev, pins[0], config);
return 0;
}
/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
static const struct pinconf_ops samsung_pinconf_ops = {
.pin_config_get = samsung_pinconf_get,
.pin_config_set = samsung_pinconf_set,
.pin_config_group_get = samsung_pinconf_group_get,
.pin_config_group_set = samsung_pinconf_group_set,
};
/*
* The samsung_gpio_set_vlaue() should be called with "bank->slock" held
* to avoid race condition.
*/
static void samsung_gpio_set_value(struct gpio_chip *gc,
unsigned offset, int value)
{
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
const struct samsung_pin_bank_type *type = bank->type;
void __iomem *reg;
u32 data;
reg = bank->pctl_base + bank->pctl_offset;
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data &= ~(1 << offset);
if (value)
data |= 1 << offset;
writel(data, reg + type->reg_offset[PINCFG_TYPE_DAT]);
}
/* gpiolib gpio_set callback function */
static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
unsigned long flags;
raw_spin_lock_irqsave(&bank->slock, flags);
samsung_gpio_set_value(gc, offset, value);
raw_spin_unlock_irqrestore(&bank->slock, flags);
}
/* gpiolib gpio_get callback function */
static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
{
void __iomem *reg;
u32 data;
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
const struct samsung_pin_bank_type *type = bank->type;
reg = bank->pctl_base + bank->pctl_offset;
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data >>= offset;
data &= 1;
return data;
}
/*
* The samsung_gpio_set_direction() should be called with "bank->slock" held
* to avoid race condition.
* The calls to gpio_direction_output() and gpio_direction_input()
* leads to this function call.
*/
static int samsung_gpio_set_direction(struct gpio_chip *gc,
unsigned offset, bool input)
{
const struct samsung_pin_bank_type *type;
struct samsung_pin_bank *bank;
void __iomem *reg;
u32 data, mask, shift;
bank = gpiochip_get_data(gc);
type = bank->type;
reg = bank->pctl_base + bank->pctl_offset
+ type->reg_offset[PINCFG_TYPE_FUNC];
mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1;
shift = offset * type->fld_width[PINCFG_TYPE_FUNC];
if (shift >= 32) {
/* Some banks have two config registers */
shift -= 32;
reg += 4;
}
data = readl(reg);
data &= ~(mask << shift);
if (!input)
data |= EXYNOS_PIN_FUNC_OUTPUT << shift;
writel(data, reg);
return 0;
}
/* gpiolib gpio_direction_input callback function. */
static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
unsigned long flags;
int ret;
raw_spin_lock_irqsave(&bank->slock, flags);
ret = samsung_gpio_set_direction(gc, offset, true);
raw_spin_unlock_irqrestore(&bank->slock, flags);
return ret;
}
/* gpiolib gpio_direction_output callback function. */
static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
int value)
{
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
unsigned long flags;
int ret;
raw_spin_lock_irqsave(&bank->slock, flags);
samsung_gpio_set_value(gc, offset, value);
ret = samsung_gpio_set_direction(gc, offset, false);
raw_spin_unlock_irqrestore(&bank->slock, flags);
return ret;
}
/*
* gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin
* and a virtual IRQ, if not already present.
*/
static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
unsigned int virq;
if (!bank->irq_domain)
return -ENXIO;
virq = irq_create_mapping(bank->irq_domain, offset);
return (virq) ? : -ENXIO;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
static struct samsung_pin_group *samsung_pinctrl_create_groups(
struct device *dev,
struct samsung_pinctrl_drv_data *drvdata,
unsigned int *cnt)
{
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
struct pinctrl_desc *ctrldesc = &drvdata->pctl;
struct samsung_pin_group *groups, *grp;
const struct pinctrl_pin_desc *pdesc;
int i;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
groups = devm_kcalloc(dev, ctrldesc->npins, sizeof(*groups),
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
GFP_KERNEL);
if (!groups)
return ERR_PTR(-EINVAL);
grp = groups;
pdesc = ctrldesc->pins;
for (i = 0; i < ctrldesc->npins; ++i, ++pdesc, ++grp) {
grp->name = pdesc->name;
grp->pins = &pdesc->number;
grp->num_pins = 1;
}
*cnt = ctrldesc->npins;
return groups;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
static int samsung_pinctrl_create_function(struct device *dev,
struct samsung_pinctrl_drv_data *drvdata,
struct device_node *func_np,
struct samsung_pmx_func *func)
{
int npins;
int ret;
int i;
if (of_property_read_u32(func_np, "samsung,pin-function", &func->val))
return 0;
npins = of_property_count_strings(func_np, "samsung,pins");
if (npins < 1) {
dev_err(dev, "invalid pin list in %pOFn node", func_np);
return -EINVAL;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
func->name = func_np->full_name;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
func->groups = devm_kcalloc(dev, npins, sizeof(char *), GFP_KERNEL);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
if (!func->groups)
return -ENOMEM;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
for (i = 0; i < npins; ++i) {
const char *gname;
ret = of_property_read_string_index(func_np, "samsung,pins",
i, &gname);
if (ret) {
dev_err(dev,
"failed to read pin name %d from %pOFn node\n",
i, func_np);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return ret;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
func->groups[i] = gname;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
func->num_groups = npins;
return 1;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
static struct samsung_pmx_func *samsung_pinctrl_create_functions(
struct device *dev,
struct samsung_pinctrl_drv_data *drvdata,
unsigned int *cnt)
{
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
struct samsung_pmx_func *functions, *func;
struct device_node *dev_np = dev->of_node;
struct device_node *cfg_np;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
unsigned int func_cnt = 0;
int ret;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
/*
* Iterate over all the child nodes of the pin controller node
* and create pin groups and pin function lists.
*/
for_each_child_of_node(dev_np, cfg_np) {
struct device_node *func_np;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
if (!of_get_child_count(cfg_np)) {
if (!of_find_property(cfg_np,
"samsung,pin-function", NULL))
continue;
++func_cnt;
continue;
}
for_each_child_of_node(cfg_np, func_np) {
if (!of_find_property(func_np,
"samsung,pin-function", NULL))
continue;
++func_cnt;
}
}
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
functions = devm_kcalloc(dev, func_cnt, sizeof(*functions),
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
GFP_KERNEL);
if (!functions)
return ERR_PTR(-ENOMEM);
func = functions;
/*
* Iterate over all the child nodes of the pin controller node
* and create pin groups and pin function lists.
*/
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
func_cnt = 0;
for_each_child_of_node(dev_np, cfg_np) {
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
struct device_node *func_np;
if (!of_get_child_count(cfg_np)) {
ret = samsung_pinctrl_create_function(dev, drvdata,
cfg_np, func);
if (ret < 0) {
of_node_put(cfg_np);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return ERR_PTR(ret);
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
if (ret > 0) {
++func;
++func_cnt;
}
continue;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
for_each_child_of_node(cfg_np, func_np) {
ret = samsung_pinctrl_create_function(dev, drvdata,
func_np, func);
if (ret < 0) {
of_node_put(func_np);
of_node_put(cfg_np);
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
return ERR_PTR(ret);
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
if (ret > 0) {
++func;
++func_cnt;
}
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
*cnt = func_cnt;
return functions;
}
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
/*
* Parse the information about all the available pin groups and pin functions
* from device node of the pin-controller. A pin group is formed with all
* the pins listed in the "samsung,pins" property.
*/
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
static int samsung_pinctrl_parse_dt(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct device *dev = &pdev->dev;
struct samsung_pin_group *groups;
struct samsung_pmx_func *functions;
unsigned int grp_cnt = 0, func_cnt = 0;
groups = samsung_pinctrl_create_groups(dev, drvdata, &grp_cnt);
if (IS_ERR(groups)) {
dev_err(dev, "failed to parse pin groups\n");
return PTR_ERR(groups);
}
functions = samsung_pinctrl_create_functions(dev, drvdata, &func_cnt);
if (IS_ERR(functions)) {
dev_err(dev, "failed to parse pin functions\n");
return PTR_ERR(functions);
}
drvdata->pin_groups = groups;
drvdata->nr_groups = grp_cnt;
drvdata->pmx_functions = functions;
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes One of remaining limitations of current pinctrl-samsung driver was the inability to parse multiple pinmux/pinconf group nodes grouped inside a single device tree node. It made defining groups of pins for single purpose, but with different parameters very inconvenient. This patch implements Tegra-like support for grouping multiple pinctrl groups inside one device tree node, by completely changing the way pin groups and functions are parsed from device tree. The code creating pinctrl maps from DT nodes has been borrowed from pinctrl-tegra, while the initial creation of groups and functions has been completely rewritten with following assumptions: - each group consists of just one pin and does not depend on data from device tree, - each function is represented by a device tree child node of the pin controller, which in turn can contain multiple child nodes for pins that need to have different configuration values. Device Tree bindings are fully backwards compatible. New functionality can be used by defining a new pinctrl group consisting of several child nodes, as on following example: sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; }; Tested on Exynos4210-Trats board and a custom Exynos4212-based one. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-02 23:41:03 +08:00
drvdata->nr_functions = func_cnt;
return 0;
}
/* register the pinctrl interface with the pinctrl subsystem */
static int samsung_pinctrl_register(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct pinctrl_desc *ctrldesc = &drvdata->pctl;
struct pinctrl_pin_desc *pindesc, *pdesc;
struct samsung_pin_bank *pin_bank;
char *pin_names;
int pin, bank, ret;
ctrldesc->name = "samsung-pinctrl";
ctrldesc->owner = THIS_MODULE;
ctrldesc->pctlops = &samsung_pctrl_ops;
ctrldesc->pmxops = &samsung_pinmux_ops;
ctrldesc->confops = &samsung_pinconf_ops;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
pindesc = devm_kcalloc(&pdev->dev,
drvdata->nr_pins, sizeof(*pindesc),
GFP_KERNEL);
if (!pindesc)
return -ENOMEM;
ctrldesc->pins = pindesc;
ctrldesc->npins = drvdata->nr_pins;
/* dynamically populate the pin number and pin name for pindesc */
for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
pdesc->number = pin + drvdata->pin_base;
/*
* allocate space for storing the dynamically generated names for all
* the pins which belong to this pin-controller.
*/
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
pin_names = devm_kzalloc(&pdev->dev,
array3_size(sizeof(char), PIN_NAME_LENGTH,
drvdata->nr_pins),
GFP_KERNEL);
if (!pin_names)
return -ENOMEM;
/* for each pin, the name of the pin is pin-bank name + pin number */
for (bank = 0; bank < drvdata->nr_banks; bank++) {
pin_bank = &drvdata->pin_banks[bank];
for (pin = 0; pin < pin_bank->nr_pins; pin++) {
sprintf(pin_names, "%s-%d", pin_bank->name, pin);
pdesc = pindesc + pin_bank->pin_base + pin;
pdesc->name = pin_names;
pin_names += PIN_NAME_LENGTH;
}
}
ret = samsung_pinctrl_parse_dt(pdev, drvdata);
if (ret)
return ret;
drvdata->pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc,
drvdata);
if (IS_ERR(drvdata->pctl_dev)) {
dev_err(&pdev->dev, "could not register pinctrl driver\n");
return PTR_ERR(drvdata->pctl_dev);
}
for (bank = 0; bank < drvdata->nr_banks; ++bank) {
pin_bank = &drvdata->pin_banks[bank];
pin_bank->grange.name = pin_bank->name;
pin_bank->grange.id = bank;
pin_bank->grange.pin_base = drvdata->pin_base
+ pin_bank->pin_base;
pin_bank->grange.base = pin_bank->grange.pin_base;
pin_bank->grange.npins = pin_bank->nr_pins;
pin_bank->grange.gc = &pin_bank->gpio_chip;
pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange);
}
return 0;
}
/* unregister the pinctrl interface with the pinctrl subsystem */
static int samsung_pinctrl_unregister(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_bank *bank = drvdata->pin_banks;
int i;
for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
pinctrl_remove_gpio_range(drvdata->pctl_dev, &bank->grange);
return 0;
}
static const struct gpio_chip samsung_gpiolib_chip = {
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
.set = samsung_gpio_set,
.get = samsung_gpio_get,
.direction_input = samsung_gpio_direction_input,
.direction_output = samsung_gpio_direction_output,
.to_irq = samsung_gpio_to_irq,
.owner = THIS_MODULE,
};
/* register the gpiolib interface with the gpiolib subsystem */
static int samsung_gpiolib_register(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_bank *bank = drvdata->pin_banks;
struct gpio_chip *gc;
int ret;
int i;
for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
bank->gpio_chip = samsung_gpiolib_chip;
gc = &bank->gpio_chip;
gc->base = bank->grange.base;
gc->ngpio = bank->nr_pins;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
gc->parent = &pdev->dev;
gc->of_node = bank->of_node;
gc->label = bank->name;
ret = devm_gpiochip_add_data(&pdev->dev, gc, bank);
if (ret) {
dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n",
gc->label, ret);
return ret;
}
}
return 0;
}
static const struct samsung_pin_ctrl *
samsung_pinctrl_get_soc_data_for_of_alias(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct samsung_pinctrl_of_match_data *of_data;
int id;
id = of_alias_get_id(node, "pinctrl");
if (id < 0) {
dev_err(&pdev->dev, "failed to get alias id\n");
return NULL;
}
of_data = of_device_get_match_data(&pdev->dev);
if (id >= of_data->num_ctrl) {
dev_err(&pdev->dev, "invalid alias id %d\n", id);
return NULL;
}
return &(of_data->ctrl[id]);
}
/* retrieve the soc specific data */
static const struct samsung_pin_ctrl *
samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *np;
const struct samsung_pin_bank_data *bdata;
const struct samsung_pin_ctrl *ctrl;
struct samsung_pin_bank *bank;
struct resource *res;
void __iomem *virt_base[SAMSUNG_PINCTRL_NUM_RESOURCES];
unsigned int i;
ctrl = samsung_pinctrl_get_soc_data_for_of_alias(pdev);
if (!ctrl)
return ERR_PTR(-ENOENT);
d->suspend = ctrl->suspend;
d->resume = ctrl->resume;
d->nr_banks = ctrl->nr_banks;
d->pin_banks = devm_kcalloc(&pdev->dev, d->nr_banks,
sizeof(*d->pin_banks), GFP_KERNEL);
if (!d->pin_banks)
return ERR_PTR(-ENOMEM);
if (ctrl->nr_ext_resources + 1 > SAMSUNG_PINCTRL_NUM_RESOURCES)
return ERR_PTR(-EINVAL);
for (i = 0; i < ctrl->nr_ext_resources + 1; i++) {
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!res) {
dev_err(&pdev->dev, "failed to get mem%d resource\n", i);
return ERR_PTR(-EINVAL);
}
virt_base[i] = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (!virt_base[i]) {
dev_err(&pdev->dev, "failed to ioremap %pR\n", res);
return ERR_PTR(-EIO);
}
}
bank = d->pin_banks;
bdata = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bdata, ++bank) {
bank->type = bdata->type;
bank->pctl_offset = bdata->pctl_offset;
bank->nr_pins = bdata->nr_pins;
bank->eint_func = bdata->eint_func;
bank->eint_type = bdata->eint_type;
bank->eint_mask = bdata->eint_mask;
bank->eint_offset = bdata->eint_offset;
bank->name = bdata->name;
raw_spin_lock_init(&bank->slock);
bank->drvdata = d;
bank->pin_base = d->nr_pins;
d->nr_pins += bank->nr_pins;
bank->eint_base = virt_base[0];
bank->pctl_base = virt_base[bdata->pctl_res_idx];
}
pinctrl: samsung: Fix NULL pointer exception on external interrupts on S3C24xx After commit 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank"), the S3C24xx (and probably S3C64xx as well) fails: Unable to handle kernel NULL pointer dereference at virtual address 000000a8 ... (s3c24xx_demux_eint4_7) from [<c004469c>] (__handle_domain_irq+0x6c/0xcc) (__handle_domain_irq) from [<c0009444>] (s3c24xx_handle_irq+0x6c/0x12c) (s3c24xx_handle_irq) from [<c000e5fc>] (__irq_svc+0x5c/0x78) Mentioned commit moved the pointer to controller's base IO memory address from each controller's driver data (samsung_pinctrl_drv_data) to per-bank structure (samsung_pin_bank). The external interrupt demux handlers (s3c24xx_demux_eint()) tried to get this base address from opaque pointer stored under irq_chip data: struct irq_data *irqd = irq_desc_get_irq_data(desc); struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); ... pend = readl(bank->eint_base + EINTPEND_REG); which is wrong because this is hardware irq and it bank was never set for this irq_chip. For S3C24xx and S3C64xx, this partially reverts mentioned commit by bringing back the virt_base stored under each controller's driver data (samsung_pinctrl_drv_data). This virt_base address will be now duplicated: - samsung_pinctrl_drv_data->virt_base: used on S3C24xx and S3C64xx, - samsung_pin_bank->pctl_base: used on Exynos. Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank") Cc: <stable@vger.kernel.org> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reported-by: Sergio Prado <sergio.prado@e-labworks.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Lihua Yao <ylhuajnu@163.com>
2017-06-15 23:46:37 +08:00
/*
* Legacy platforms should provide only one resource with IO memory.
* Store it as virt_base because legacy driver needs to access it
* through samsung_pinctrl_drv_data.
*/
d->virt_base = virt_base[0];
for_each_child_of_node(node, np) {
if (!of_find_property(np, "gpio-controller", NULL))
continue;
bank = d->pin_banks;
for (i = 0; i < d->nr_banks; ++i, ++bank) {
if (of_node_name_eq(np, bank->name)) {
bank->of_node = np;
break;
}
}
}
d->pin_base = pin_base;
pin_base += d->nr_pins;
return ctrl;
}
static int samsung_pinctrl_probe(struct platform_device *pdev)
{
struct samsung_pinctrl_drv_data *drvdata;
const struct samsung_pin_ctrl *ctrl;
struct device *dev = &pdev->dev;
int ret;
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev);
if (IS_ERR(ctrl)) {
dev_err(&pdev->dev, "driver data not available\n");
return PTR_ERR(ctrl);
}
drvdata->dev = dev;
ret = platform_get_irq_optional(pdev, 0);
if (ret < 0 && ret != -ENXIO)
return ret;
if (ret > 0)
drvdata->irq = ret;
if (ctrl->retention_data) {
drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,
ctrl->retention_data);
if (IS_ERR(drvdata->retention_ctrl))
return PTR_ERR(drvdata->retention_ctrl);
}
ret = samsung_pinctrl_register(pdev, drvdata);
if (ret)
return ret;
ret = samsung_gpiolib_register(pdev, drvdata);
if (ret) {
samsung_pinctrl_unregister(pdev, drvdata);
return ret;
}
if (ctrl->eint_gpio_init)
ctrl->eint_gpio_init(drvdata);
if (ctrl->eint_wkup_init)
ctrl->eint_wkup_init(drvdata);
platform_set_drvdata(pdev, drvdata);
return 0;
}
/*
* samsung_pinctrl_suspend - save pinctrl state for suspend
*
* Save data for all banks handled by this device.
*/
static int __maybe_unused samsung_pinctrl_suspend(struct device *dev)
{
struct samsung_pinctrl_drv_data *drvdata = dev_get_drvdata(dev);
int i;
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
void __iomem *reg = bank->pctl_base + bank->pctl_offset;
const u8 *offs = bank->type->reg_offset;
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
/* Registers without a powerdown config aren't lost */
if (!widths[PINCFG_TYPE_CON_PDN])
continue;
for (type = 0; type < PINCFG_TYPE_NUM; type++)
if (widths[type])
bank->pm_save[type] = readl(reg + offs[type]);
if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) {
/* Some banks have two config registers */
bank->pm_save[PINCFG_TYPE_NUM] =
readl(reg + offs[PINCFG_TYPE_FUNC] + 4);
pr_debug("Save %s @ %p (con %#010x %08x)\n",
bank->name, reg,
bank->pm_save[PINCFG_TYPE_FUNC],
bank->pm_save[PINCFG_TYPE_NUM]);
} else {
pr_debug("Save %s @ %p (con %#010x)\n", bank->name,
reg, bank->pm_save[PINCFG_TYPE_FUNC]);
}
}
if (drvdata->suspend)
drvdata->suspend(drvdata);
if (drvdata->retention_ctrl && drvdata->retention_ctrl->enable)
drvdata->retention_ctrl->enable(drvdata);
return 0;
}
/*
* samsung_pinctrl_resume - restore pinctrl state from suspend
*
* Restore one of the banks that was saved during suspend.
*
* We don't bother doing anything complicated to avoid glitching lines since
* we're called before pad retention is turned off.
*/
static int __maybe_unused samsung_pinctrl_resume(struct device *dev)
{
struct samsung_pinctrl_drv_data *drvdata = dev_get_drvdata(dev);
int i;
if (drvdata->resume)
drvdata->resume(drvdata);
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
void __iomem *reg = bank->pctl_base + bank->pctl_offset;
const u8 *offs = bank->type->reg_offset;
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
/* Registers without a powerdown config aren't lost */
if (!widths[PINCFG_TYPE_CON_PDN])
continue;
if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) {
/* Some banks have two config registers */
pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n",
bank->name, reg,
readl(reg + offs[PINCFG_TYPE_FUNC]),
readl(reg + offs[PINCFG_TYPE_FUNC] + 4),
bank->pm_save[PINCFG_TYPE_FUNC],
bank->pm_save[PINCFG_TYPE_NUM]);
writel(bank->pm_save[PINCFG_TYPE_NUM],
reg + offs[PINCFG_TYPE_FUNC] + 4);
} else {
pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name,
reg, readl(reg + offs[PINCFG_TYPE_FUNC]),
bank->pm_save[PINCFG_TYPE_FUNC]);
}
for (type = 0; type < PINCFG_TYPE_NUM; type++)
if (widths[type])
writel(bank->pm_save[type], reg + offs[type]);
}
if (drvdata->retention_ctrl && drvdata->retention_ctrl->disable)
drvdata->retention_ctrl->disable(drvdata);
return 0;
}
static const struct of_device_id samsung_pinctrl_dt_match[] = {
#ifdef CONFIG_PINCTRL_EXYNOS_ARM
{ .compatible = "samsung,exynos3250-pinctrl",
.data = &exynos3250_of_data },
{ .compatible = "samsung,exynos4210-pinctrl",
.data = &exynos4210_of_data },
{ .compatible = "samsung,exynos4x12-pinctrl",
.data = &exynos4x12_of_data },
{ .compatible = "samsung,exynos5250-pinctrl",
.data = &exynos5250_of_data },
{ .compatible = "samsung,exynos5260-pinctrl",
.data = &exynos5260_of_data },
{ .compatible = "samsung,exynos5410-pinctrl",
.data = &exynos5410_of_data },
{ .compatible = "samsung,exynos5420-pinctrl",
.data = &exynos5420_of_data },
{ .compatible = "samsung,s5pv210-pinctrl",
.data = &s5pv210_of_data },
#endif
#ifdef CONFIG_PINCTRL_EXYNOS_ARM64
{ .compatible = "samsung,exynos5433-pinctrl",
.data = &exynos5433_of_data },
{ .compatible = "samsung,exynos7-pinctrl",
.data = &exynos7_of_data },
{ .compatible = "samsung,exynos7885-pinctrl",
.data = &exynos7885_of_data },
{ .compatible = "samsung,exynos850-pinctrl",
.data = &exynos850_of_data },
{ .compatible = "samsung,exynosautov9-pinctrl",
.data = &exynosautov9_of_data },
#endif
#ifdef CONFIG_PINCTRL_S3C64XX
{ .compatible = "samsung,s3c64xx-pinctrl",
.data = &s3c64xx_of_data },
#endif
#ifdef CONFIG_PINCTRL_S3C24XX
{ .compatible = "samsung,s3c2412-pinctrl",
.data = &s3c2412_of_data },
{ .compatible = "samsung,s3c2416-pinctrl",
.data = &s3c2416_of_data },
{ .compatible = "samsung,s3c2440-pinctrl",
.data = &s3c2440_of_data },
{ .compatible = "samsung,s3c2450-pinctrl",
.data = &s3c2450_of_data },
#endif
{},
};
static const struct dev_pm_ops samsung_pinctrl_pm_ops = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(samsung_pinctrl_suspend,
samsung_pinctrl_resume)
};
static struct platform_driver samsung_pinctrl_driver = {
.probe = samsung_pinctrl_probe,
.driver = {
.name = "samsung-pinctrl",
.of_match_table = samsung_pinctrl_dt_match,
2016-05-17 14:02:06 +08:00
.suppress_bind_attrs = true,
.pm = &samsung_pinctrl_pm_ops,
},
};
static int __init samsung_pinctrl_drv_register(void)
{
return platform_driver_register(&samsung_pinctrl_driver);
}
postcore_initcall(samsung_pinctrl_drv_register);