linux/fs/dlm/lockspace.c

921 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/******************************************************************************
*******************************************************************************
**
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
** Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
**
**
*******************************************************************************
******************************************************************************/
#include <linux/module.h>
#include "dlm_internal.h"
#include "lockspace.h"
#include "member.h"
#include "recoverd.h"
#include "dir.h"
#include "midcomms.h"
#include "lowcomms.h"
#include "config.h"
#include "memory.h"
#include "lock.h"
#include "recover.h"
#include "requestqueue.h"
#include "user.h"
#include "ast.h"
static int ls_count;
static struct mutex ls_lock;
static struct list_head lslist;
static spinlock_t lslist_lock;
static struct task_struct * scand_task;
static ssize_t dlm_control_store(struct dlm_ls *ls, const char *buf, size_t len)
{
ssize_t ret = len;
int n;
int rc = kstrtoint(buf, 0, &n);
if (rc)
return rc;
ls = dlm_find_lockspace_local(ls->ls_local_handle);
if (!ls)
return -EINVAL;
switch (n) {
case 0:
dlm_ls_stop(ls);
break;
case 1:
dlm_ls_start(ls);
break;
default:
ret = -EINVAL;
}
dlm_put_lockspace(ls);
return ret;
}
static ssize_t dlm_event_store(struct dlm_ls *ls, const char *buf, size_t len)
{
int rc = kstrtoint(buf, 0, &ls->ls_uevent_result);
if (rc)
return rc;
set_bit(LSFL_UEVENT_WAIT, &ls->ls_flags);
wake_up(&ls->ls_uevent_wait);
return len;
}
static ssize_t dlm_id_show(struct dlm_ls *ls, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%u\n", ls->ls_global_id);
}
static ssize_t dlm_id_store(struct dlm_ls *ls, const char *buf, size_t len)
{
int rc = kstrtouint(buf, 0, &ls->ls_global_id);
if (rc)
return rc;
return len;
}
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-27 04:54:29 +08:00
static ssize_t dlm_nodir_show(struct dlm_ls *ls, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%u\n", dlm_no_directory(ls));
}
static ssize_t dlm_nodir_store(struct dlm_ls *ls, const char *buf, size_t len)
{
int val;
int rc = kstrtoint(buf, 0, &val);
if (rc)
return rc;
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-27 04:54:29 +08:00
if (val == 1)
set_bit(LSFL_NODIR, &ls->ls_flags);
return len;
}
static ssize_t dlm_recover_status_show(struct dlm_ls *ls, char *buf)
{
uint32_t status = dlm_recover_status(ls);
return snprintf(buf, PAGE_SIZE, "%x\n", status);
}
static ssize_t dlm_recover_nodeid_show(struct dlm_ls *ls, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n", ls->ls_recover_nodeid);
}
struct dlm_attr {
struct attribute attr;
ssize_t (*show)(struct dlm_ls *, char *);
ssize_t (*store)(struct dlm_ls *, const char *, size_t);
};
static struct dlm_attr dlm_attr_control = {
.attr = {.name = "control", .mode = S_IWUSR},
.store = dlm_control_store
};
static struct dlm_attr dlm_attr_event = {
.attr = {.name = "event_done", .mode = S_IWUSR},
.store = dlm_event_store
};
static struct dlm_attr dlm_attr_id = {
.attr = {.name = "id", .mode = S_IRUGO | S_IWUSR},
.show = dlm_id_show,
.store = dlm_id_store
};
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-27 04:54:29 +08:00
static struct dlm_attr dlm_attr_nodir = {
.attr = {.name = "nodir", .mode = S_IRUGO | S_IWUSR},
.show = dlm_nodir_show,
.store = dlm_nodir_store
};
static struct dlm_attr dlm_attr_recover_status = {
.attr = {.name = "recover_status", .mode = S_IRUGO},
.show = dlm_recover_status_show
};
static struct dlm_attr dlm_attr_recover_nodeid = {
.attr = {.name = "recover_nodeid", .mode = S_IRUGO},
.show = dlm_recover_nodeid_show
};
static struct attribute *dlm_attrs[] = {
&dlm_attr_control.attr,
&dlm_attr_event.attr,
&dlm_attr_id.attr,
dlm: fixes for nodir mode The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
2012-04-27 04:54:29 +08:00
&dlm_attr_nodir.attr,
&dlm_attr_recover_status.attr,
&dlm_attr_recover_nodeid.attr,
NULL,
};
ATTRIBUTE_GROUPS(dlm);
static ssize_t dlm_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct dlm_ls *ls = container_of(kobj, struct dlm_ls, ls_kobj);
struct dlm_attr *a = container_of(attr, struct dlm_attr, attr);
return a->show ? a->show(ls, buf) : 0;
}
static ssize_t dlm_attr_store(struct kobject *kobj, struct attribute *attr,
const char *buf, size_t len)
{
struct dlm_ls *ls = container_of(kobj, struct dlm_ls, ls_kobj);
struct dlm_attr *a = container_of(attr, struct dlm_attr, attr);
return a->store ? a->store(ls, buf, len) : len;
}
static void lockspace_kobj_release(struct kobject *k)
{
struct dlm_ls *ls = container_of(k, struct dlm_ls, ls_kobj);
kfree(ls);
}
static const struct sysfs_ops dlm_attr_ops = {
.show = dlm_attr_show,
.store = dlm_attr_store,
};
static struct kobj_type dlm_ktype = {
.default_groups = dlm_groups,
.sysfs_ops = &dlm_attr_ops,
.release = lockspace_kobj_release,
};
static struct kset *dlm_kset;
static int do_uevent(struct dlm_ls *ls, int in)
{
if (in)
kobject_uevent(&ls->ls_kobj, KOBJ_ONLINE);
else
kobject_uevent(&ls->ls_kobj, KOBJ_OFFLINE);
log_rinfo(ls, "%s the lockspace group...", in ? "joining" : "leaving");
/* dlm_controld will see the uevent, do the necessary group management
and then write to sysfs to wake us */
wait_event(ls->ls_uevent_wait,
test_and_clear_bit(LSFL_UEVENT_WAIT, &ls->ls_flags));
log_rinfo(ls, "group event done %d", ls->ls_uevent_result);
return ls->ls_uevent_result;
}
static int dlm_uevent(struct kset *kset, struct kobject *kobj,
struct kobj_uevent_env *env)
{
struct dlm_ls *ls = container_of(kobj, struct dlm_ls, ls_kobj);
add_uevent_var(env, "LOCKSPACE=%s", ls->ls_name);
return 0;
}
static const struct kset_uevent_ops dlm_uevent_ops = {
.uevent = dlm_uevent,
};
int __init dlm_lockspace_init(void)
{
ls_count = 0;
mutex_init(&ls_lock);
INIT_LIST_HEAD(&lslist);
spin_lock_init(&lslist_lock);
dlm_kset = kset_create_and_add("dlm", &dlm_uevent_ops, kernel_kobj);
if (!dlm_kset) {
printk(KERN_WARNING "%s: can not create kset\n", __func__);
return -ENOMEM;
}
return 0;
}
void dlm_lockspace_exit(void)
{
kset_unregister(dlm_kset);
}
static struct dlm_ls *find_ls_to_scan(void)
{
struct dlm_ls *ls;
spin_lock(&lslist_lock);
list_for_each_entry(ls, &lslist, ls_list) {
if (time_after_eq(jiffies, ls->ls_scan_time +
dlm_config.ci_scan_secs * HZ)) {
spin_unlock(&lslist_lock);
return ls;
}
}
spin_unlock(&lslist_lock);
return NULL;
}
static int dlm_scand(void *data)
{
struct dlm_ls *ls;
while (!kthread_should_stop()) {
ls = find_ls_to_scan();
if (ls) {
if (dlm_lock_recovery_try(ls)) {
ls->ls_scan_time = jiffies;
dlm_scan_rsbs(ls);
dlm_scan_timeout(ls);
dlm_scan_waiters(ls);
dlm_unlock_recovery(ls);
} else {
ls->ls_scan_time += HZ;
}
continue;
}
schedule_timeout_interruptible(dlm_config.ci_scan_secs * HZ);
}
return 0;
}
static int dlm_scand_start(void)
{
struct task_struct *p;
int error = 0;
p = kthread_run(dlm_scand, NULL, "dlm_scand");
if (IS_ERR(p))
error = PTR_ERR(p);
else
scand_task = p;
return error;
}
static void dlm_scand_stop(void)
{
kthread_stop(scand_task);
}
struct dlm_ls *dlm_find_lockspace_global(uint32_t id)
{
struct dlm_ls *ls;
spin_lock(&lslist_lock);
list_for_each_entry(ls, &lslist, ls_list) {
if (ls->ls_global_id == id) {
ls->ls_count++;
goto out;
}
}
ls = NULL;
out:
spin_unlock(&lslist_lock);
return ls;
}
struct dlm_ls *dlm_find_lockspace_local(dlm_lockspace_t *lockspace)
{
struct dlm_ls *ls;
spin_lock(&lslist_lock);
list_for_each_entry(ls, &lslist, ls_list) {
if (ls->ls_local_handle == lockspace) {
ls->ls_count++;
goto out;
}
}
ls = NULL;
out:
spin_unlock(&lslist_lock);
return ls;
}
struct dlm_ls *dlm_find_lockspace_device(int minor)
{
struct dlm_ls *ls;
spin_lock(&lslist_lock);
list_for_each_entry(ls, &lslist, ls_list) {
if (ls->ls_device.minor == minor) {
ls->ls_count++;
goto out;
}
}
ls = NULL;
out:
spin_unlock(&lslist_lock);
return ls;
}
void dlm_put_lockspace(struct dlm_ls *ls)
{
spin_lock(&lslist_lock);
ls->ls_count--;
spin_unlock(&lslist_lock);
}
static void remove_lockspace(struct dlm_ls *ls)
{
for (;;) {
spin_lock(&lslist_lock);
if (ls->ls_count == 0) {
WARN_ON(ls->ls_create_count != 0);
list_del(&ls->ls_list);
spin_unlock(&lslist_lock);
return;
}
spin_unlock(&lslist_lock);
ssleep(1);
}
}
static int threads_start(void)
{
int error;
error = dlm_scand_start();
if (error) {
log_print("cannot start dlm_scand thread %d", error);
goto fail;
}
/* Thread for sending/receiving messages for all lockspace's */
error = dlm_midcomms_start();
if (error) {
log_print("cannot start dlm lowcomms %d", error);
goto scand_fail;
}
return 0;
scand_fail:
dlm_scand_stop();
fail:
return error;
}
static int new_lockspace(const char *name, const char *cluster,
uint32_t flags, int lvblen,
const struct dlm_lockspace_ops *ops, void *ops_arg,
int *ops_result, dlm_lockspace_t **lockspace)
{
struct dlm_ls *ls;
int i, size, error;
int do_unreg = 0;
int namelen = strlen(name);
if (namelen > DLM_LOCKSPACE_LEN || namelen == 0)
return -EINVAL;
if (!lvblen || (lvblen % 8))
return -EINVAL;
if (!try_module_get(THIS_MODULE))
return -EINVAL;
if (!dlm_user_daemon_available()) {
log_print("dlm user daemon not available");
error = -EUNATCH;
goto out;
}
if (ops && ops_result) {
if (!dlm_config.ci_recover_callbacks)
*ops_result = -EOPNOTSUPP;
else
*ops_result = 0;
}
if (!cluster)
log_print("dlm cluster name '%s' is being used without an application provided cluster name",
dlm_config.ci_cluster_name);
if (dlm_config.ci_recover_callbacks && cluster &&
strncmp(cluster, dlm_config.ci_cluster_name, DLM_LOCKSPACE_LEN)) {
log_print("dlm cluster name '%s' does not match "
"the application cluster name '%s'",
dlm_config.ci_cluster_name, cluster);
error = -EBADR;
goto out;
}
error = 0;
spin_lock(&lslist_lock);
list_for_each_entry(ls, &lslist, ls_list) {
WARN_ON(ls->ls_create_count <= 0);
if (ls->ls_namelen != namelen)
continue;
if (memcmp(ls->ls_name, name, namelen))
continue;
if (flags & DLM_LSFL_NEWEXCL) {
error = -EEXIST;
break;
}
ls->ls_create_count++;
*lockspace = ls;
error = 1;
break;
}
spin_unlock(&lslist_lock);
if (error)
goto out;
error = -ENOMEM;
ls = kzalloc(sizeof(struct dlm_ls) + namelen, GFP_NOFS);
if (!ls)
goto out;
memcpy(ls->ls_name, name, namelen);
ls->ls_namelen = namelen;
ls->ls_lvblen = lvblen;
ls->ls_count = 0;
ls->ls_flags = 0;
ls->ls_scan_time = jiffies;
if (ops && dlm_config.ci_recover_callbacks) {
ls->ls_ops = ops;
ls->ls_ops_arg = ops_arg;
}
if (flags & DLM_LSFL_TIMEWARN)
set_bit(LSFL_TIMEWARN, &ls->ls_flags);
/* ls_exflags are forced to match among nodes, and we don't
need to require all nodes to have some flags set */
ls->ls_exflags = (flags & ~(DLM_LSFL_TIMEWARN | DLM_LSFL_FS |
DLM_LSFL_NEWEXCL));
size = dlm_config.ci_rsbtbl_size;
ls->ls_rsbtbl_size = size;
treewide: Use array_size() in vmalloc() The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:27:11 +08:00
ls->ls_rsbtbl = vmalloc(array_size(size, sizeof(struct dlm_rsbtable)));
if (!ls->ls_rsbtbl)
goto out_lsfree;
for (i = 0; i < size; i++) {
ls->ls_rsbtbl[i].keep.rb_node = NULL;
ls->ls_rsbtbl[i].toss.rb_node = NULL;
spin_lock_init(&ls->ls_rsbtbl[i].lock);
}
spin_lock_init(&ls->ls_remove_spin);
for (i = 0; i < DLM_REMOVE_NAMES_MAX; i++) {
ls->ls_remove_names[i] = kzalloc(DLM_RESNAME_MAXLEN+1,
GFP_KERNEL);
if (!ls->ls_remove_names[i])
goto out_rsbtbl;
}
idr_init(&ls->ls_lkbidr);
spin_lock_init(&ls->ls_lkbidr_spin);
INIT_LIST_HEAD(&ls->ls_waiters);
mutex_init(&ls->ls_waiters_mutex);
[DLM] overlapping cancel and unlock Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-28 22:56:46 +08:00
INIT_LIST_HEAD(&ls->ls_orphans);
mutex_init(&ls->ls_orphans_mutex);
INIT_LIST_HEAD(&ls->ls_timeout);
mutex_init(&ls->ls_timeout_mutex);
INIT_LIST_HEAD(&ls->ls_new_rsb);
spin_lock_init(&ls->ls_new_rsb_spin);
INIT_LIST_HEAD(&ls->ls_nodes);
INIT_LIST_HEAD(&ls->ls_nodes_gone);
ls->ls_num_nodes = 0;
ls->ls_low_nodeid = 0;
ls->ls_total_weight = 0;
ls->ls_node_array = NULL;
memset(&ls->ls_stub_rsb, 0, sizeof(struct dlm_rsb));
ls->ls_stub_rsb.res_ls = ls;
ls->ls_debug_rsb_dentry = NULL;
ls->ls_debug_waiters_dentry = NULL;
init_waitqueue_head(&ls->ls_uevent_wait);
ls->ls_uevent_result = 0;
init_completion(&ls->ls_members_done);
ls->ls_members_result = -1;
mutex_init(&ls->ls_cb_mutex);
INIT_LIST_HEAD(&ls->ls_cb_delay);
ls->ls_recoverd_task = NULL;
mutex_init(&ls->ls_recoverd_active);
spin_lock_init(&ls->ls_recover_lock);
spin_lock_init(&ls->ls_rcom_spin);
get_random_bytes(&ls->ls_rcom_seq, sizeof(uint64_t));
ls->ls_recover_status = 0;
ls->ls_recover_seq = 0;
ls->ls_recover_args = NULL;
init_rwsem(&ls->ls_in_recovery);
init_rwsem(&ls->ls_recv_active);
INIT_LIST_HEAD(&ls->ls_requestqueue);
mutex_init(&ls->ls_requestqueue_mutex);
mutex_init(&ls->ls_clear_proc_locks);
fs: dlm: add reliable connection if reconnect This patch introduce to make a tcp lowcomms connection reliable even if reconnects occurs. This is done by an application layer re-transmission handling and sequence numbers in dlm protocols. There are three new dlm commands: DLM_OPTS: This will encapsulate an existing dlm message (and rcom message if they don't have an own application side re-transmission handling). As optional handling additional tlv's (type length fields) can be appended. This can be for example a sequence number field. However because in DLM_OPTS the lockspace field is unused and a sequence number is a mandatory field it isn't made as a tlv and we put the sequence number inside the lockspace id. The possibility to add optional options are still there for future purposes. DLM_ACK: Just a dlm header to acknowledge the receive of a DLM_OPTS message to it's sender. DLM_FIN: This provides a 4 way handshake for connection termination inclusive support for half-closed connections. It's provided on application layer because SCTP doesn't support half-closed sockets, the shutdown() call can interrupted by e.g. TCP resets itself and a hard logic to implement it because the othercon paradigm in lowcomms. The 4-way termination handshake also solve problems to synchronize peer EOF arrival and that the cluster manager removes the peer in the node membership handling of DLM. In some cases messages can be still transmitted in this time and we need to wait for the node membership event. To provide a reliable connection the node will retransmit all unacknowledges message to it's peer on reconnect. The receiver will then filtering out the next received message and drop all messages which are duplicates. As RCOM_STATUS and RCOM_NAMES messages are the first messages which are exchanged and they have they own re-transmission handling, there exists logic that these messages must be first. If these messages arrives we store the dlm version field. This handling is on DLM 3.1 and after this patch 3.2 the same. A backwards compatibility handling has been added which seems to work on tests without tcpkill, however it's not recommended to use DLM 3.1 and 3.2 at the same time, because DLM 3.2 tries to fix long term bugs in the DLM protocol. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-22 03:08:46 +08:00
/* Due backwards compatibility with 3.1 we need to use maximum
* possible dlm message size to be sure the message will fit and
* not having out of bounds issues. However on sending side 3.2
* might send less.
*/
ls->ls_recover_buf = kmalloc(DLM_MAX_SOCKET_BUFSIZE, GFP_NOFS);
if (!ls->ls_recover_buf)
goto out_lkbidr;
ls->ls_slot = 0;
ls->ls_num_slots = 0;
ls->ls_slots_size = 0;
ls->ls_slots = NULL;
INIT_LIST_HEAD(&ls->ls_recover_list);
spin_lock_init(&ls->ls_recover_list_lock);
idr_init(&ls->ls_recover_idr);
spin_lock_init(&ls->ls_recover_idr_lock);
ls->ls_recover_list_count = 0;
ls->ls_local_handle = ls;
init_waitqueue_head(&ls->ls_wait_general);
INIT_LIST_HEAD(&ls->ls_root_list);
init_rwsem(&ls->ls_root_sem);
spin_lock(&lslist_lock);
ls->ls_create_count = 1;
list_add(&ls->ls_list, &lslist);
spin_unlock(&lslist_lock);
if (flags & DLM_LSFL_FS) {
error = dlm_callback_start(ls);
if (error) {
log_error(ls, "can't start dlm_callback %d", error);
goto out_delist;
}
}
init_waitqueue_head(&ls->ls_recover_lock_wait);
/*
* Once started, dlm_recoverd first looks for ls in lslist, then
* initializes ls_in_recovery as locked in "down" mode. We need
* to wait for the wakeup from dlm_recoverd because in_recovery
* has to start out in down mode.
*/
error = dlm_recoverd_start(ls);
if (error) {
log_error(ls, "can't start dlm_recoverd %d", error);
goto out_callback;
}
wait_event(ls->ls_recover_lock_wait,
test_bit(LSFL_RECOVER_LOCK, &ls->ls_flags));
/* let kobject handle freeing of ls if there's an error */
do_unreg = 1;
ls->ls_kobj.kset = dlm_kset;
error = kobject_init_and_add(&ls->ls_kobj, &dlm_ktype, NULL,
"%s", ls->ls_name);
if (error)
goto out_recoverd;
kobject_uevent(&ls->ls_kobj, KOBJ_ADD);
/* This uevent triggers dlm_controld in userspace to add us to the
group of nodes that are members of this lockspace (managed by the
cluster infrastructure.) Once it's done that, it tells us who the
current lockspace members are (via configfs) and then tells the
lockspace to start running (via sysfs) in dlm_ls_start(). */
error = do_uevent(ls, 1);
if (error)
goto out_recoverd;
wait_for_completion(&ls->ls_members_done);
error = ls->ls_members_result;
if (error)
goto out_members;
dlm_create_debug_file(ls);
log_rinfo(ls, "join complete");
*lockspace = ls;
return 0;
out_members:
do_uevent(ls, 0);
dlm_clear_members(ls);
kfree(ls->ls_node_array);
out_recoverd:
dlm_recoverd_stop(ls);
out_callback:
dlm_callback_stop(ls);
out_delist:
spin_lock(&lslist_lock);
list_del(&ls->ls_list);
spin_unlock(&lslist_lock);
idr_destroy(&ls->ls_recover_idr);
kfree(ls->ls_recover_buf);
out_lkbidr:
idr_destroy(&ls->ls_lkbidr);
out_rsbtbl:
for (i = 0; i < DLM_REMOVE_NAMES_MAX; i++)
kfree(ls->ls_remove_names[i]);
vfree(ls->ls_rsbtbl);
out_lsfree:
if (do_unreg)
kobject_put(&ls->ls_kobj);
else
kfree(ls);
out:
module_put(THIS_MODULE);
return error;
}
int dlm_new_lockspace(const char *name, const char *cluster,
uint32_t flags, int lvblen,
const struct dlm_lockspace_ops *ops, void *ops_arg,
int *ops_result, dlm_lockspace_t **lockspace)
{
int error = 0;
mutex_lock(&ls_lock);
if (!ls_count)
error = threads_start();
if (error)
goto out;
error = new_lockspace(name, cluster, flags, lvblen, ops, ops_arg,
ops_result, lockspace);
if (!error)
ls_count++;
if (error > 0)
error = 0;
fs: dlm: add shutdown hook This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:20 +08:00
if (!ls_count) {
dlm_scand_stop();
dlm_midcomms_shutdown();
fs: dlm: add shutdown hook This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:20 +08:00
dlm_lowcomms_stop();
}
out:
mutex_unlock(&ls_lock);
return error;
}
static int lkb_idr_is_local(int id, void *p, void *data)
{
struct dlm_lkb *lkb = p;
return lkb->lkb_nodeid == 0 && lkb->lkb_grmode != DLM_LOCK_IV;
}
static int lkb_idr_is_any(int id, void *p, void *data)
{
return 1;
}
static int lkb_idr_free(int id, void *p, void *data)
{
struct dlm_lkb *lkb = p;
if (lkb->lkb_lvbptr && lkb->lkb_flags & DLM_IFL_MSTCPY)
dlm_free_lvb(lkb->lkb_lvbptr);
dlm_free_lkb(lkb);
return 0;
}
/* NOTE: We check the lkbidr here rather than the resource table.
This is because there may be LKBs queued as ASTs that have been unlinked
from their RSBs and are pending deletion once the AST has been delivered */
static int lockspace_busy(struct dlm_ls *ls, int force)
{
int rv;
spin_lock(&ls->ls_lkbidr_spin);
if (force == 0) {
rv = idr_for_each(&ls->ls_lkbidr, lkb_idr_is_any, ls);
} else if (force == 1) {
rv = idr_for_each(&ls->ls_lkbidr, lkb_idr_is_local, ls);
} else {
rv = 0;
}
spin_unlock(&ls->ls_lkbidr_spin);
return rv;
}
static int release_lockspace(struct dlm_ls *ls, int force)
{
struct dlm_rsb *rsb;
struct rb_node *n;
int i, busy, rv;
busy = lockspace_busy(ls, force);
spin_lock(&lslist_lock);
if (ls->ls_create_count == 1) {
if (busy) {
rv = -EBUSY;
} else {
/* remove_lockspace takes ls off lslist */
ls->ls_create_count = 0;
rv = 0;
}
} else if (ls->ls_create_count > 1) {
rv = --ls->ls_create_count;
} else {
rv = -EINVAL;
}
spin_unlock(&lslist_lock);
if (rv) {
log_debug(ls, "release_lockspace no remove %d", rv);
return rv;
}
dlm_device_deregister(ls);
if (force < 3 && dlm_user_daemon_available())
do_uevent(ls, 0);
dlm_recoverd_stop(ls);
fs: dlm: add shutdown hook This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:20 +08:00
if (ls_count == 1) {
dlm_scand_stop();
dlm_midcomms_shutdown();
fs: dlm: add shutdown hook This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:20 +08:00
}
dlm_callback_stop(ls);
remove_lockspace(ls);
dlm_delete_debug_file(ls);
idr_destroy(&ls->ls_recover_idr);
kfree(ls->ls_recover_buf);
/*
* Free all lkb's in idr
*/
idr_for_each(&ls->ls_lkbidr, lkb_idr_free, ls);
idr_destroy(&ls->ls_lkbidr);
/*
* Free all rsb's on rsbtbl[] lists
*/
for (i = 0; i < ls->ls_rsbtbl_size; i++) {
while ((n = rb_first(&ls->ls_rsbtbl[i].keep))) {
rsb = rb_entry(n, struct dlm_rsb, res_hashnode);
rb_erase(n, &ls->ls_rsbtbl[i].keep);
dlm_free_rsb(rsb);
}
while ((n = rb_first(&ls->ls_rsbtbl[i].toss))) {
rsb = rb_entry(n, struct dlm_rsb, res_hashnode);
rb_erase(n, &ls->ls_rsbtbl[i].toss);
dlm_free_rsb(rsb);
}
}
vfree(ls->ls_rsbtbl);
for (i = 0; i < DLM_REMOVE_NAMES_MAX; i++)
kfree(ls->ls_remove_names[i]);
while (!list_empty(&ls->ls_new_rsb)) {
rsb = list_first_entry(&ls->ls_new_rsb, struct dlm_rsb,
res_hashchain);
list_del(&rsb->res_hashchain);
dlm_free_rsb(rsb);
}
/*
* Free structures on any other lists
*/
dlm_purge_requestqueue(ls);
kfree(ls->ls_recover_args);
dlm_clear_members(ls);
dlm_clear_members_gone(ls);
kfree(ls->ls_node_array);
log_rinfo(ls, "release_lockspace final free");
kobject_put(&ls->ls_kobj);
/* The ls structure will be freed when the kobject is done with */
module_put(THIS_MODULE);
return 0;
}
/*
* Called when a system has released all its locks and is not going to use the
* lockspace any longer. We free everything we're managing for this lockspace.
* Remaining nodes will go through the recovery process as if we'd died. The
* lockspace must continue to function as usual, participating in recoveries,
* until this returns.
*
* Force has 4 possible values:
* 0 - don't destroy locksapce if it has any LKBs
* 1 - destroy lockspace if it has remote LKBs but not if it has local LKBs
* 2 - destroy lockspace regardless of LKBs
* 3 - destroy lockspace as part of a forced shutdown
*/
int dlm_release_lockspace(void *lockspace, int force)
{
struct dlm_ls *ls;
int error;
ls = dlm_find_lockspace_local(lockspace);
if (!ls)
return -EINVAL;
dlm_put_lockspace(ls);
mutex_lock(&ls_lock);
error = release_lockspace(ls, force);
if (!error)
ls_count--;
if (!ls_count)
fs: dlm: add shutdown hook This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-02 06:05:20 +08:00
dlm_lowcomms_stop();
mutex_unlock(&ls_lock);
return error;
}
void dlm_stop_lockspaces(void)
{
struct dlm_ls *ls;
int count;
restart:
count = 0;
spin_lock(&lslist_lock);
list_for_each_entry(ls, &lslist, ls_list) {
if (!test_bit(LSFL_RUNNING, &ls->ls_flags)) {
count++;
continue;
}
spin_unlock(&lslist_lock);
log_error(ls, "no userland control daemon, stopping lockspace");
dlm_ls_stop(ls);
goto restart;
}
spin_unlock(&lslist_lock);
if (count)
log_print("dlm user daemon left %d lockspaces", count);
}